Abteilung Fahrzeugtechnik
Filtern
Erscheinungsjahr
- 2013 (29)
- 2017 (19)
- 2014 (15)
- 2009 (14)
- 2001 (10)
- 2011 (10)
- 2003 (9)
- 2007 (9)
- 2016 (9)
- 1996 (8)
- 1998 (7)
- 2005 (7)
- 2010 (7)
- 2004 (6)
- 1995 (5)
- 2019 (5)
- 2000 (3)
- 2002 (3)
- 2006 (3)
- 2012 (3)
- 2015 (3)
- 2018 (3)
- 1979 (2)
- 1989 (2)
- 1993 (2)
- 2008 (2)
- 1976 (1)
- 1977 (1)
- 1978 (1)
- 1980 (1)
- 1982 (1)
- 1983 (1)
- 1984 (1)
- 1986 (1)
- 1988 (1)
- 1991 (1)
- 1992 (1)
- 1994 (1)
- 1997 (1)
- 1999 (1)
Dokumenttyp
- Konferenzveröffentlichung (97)
- Buch (Monographie) (49)
- Wissenschaftlicher Artikel (45)
- Arbeitspapier (13)
- Teil eines Buches (Kapitel) (5)
Sprache
- Englisch (106)
- Deutsch (101)
- Mehrsprachig (2)
Schlagworte
- Safety (77)
- Sicherheit (76)
- Fahrzeug (57)
- Vehicle (57)
- Bewertung (51)
- Deutschland (46)
- Germany (46)
- Anfahrversuch (45)
- Evaluation (assessment) (45)
- Impact test (veh) (42)
Institut
- Abteilung Fahrzeugtechnik (209) (entfernen)
Von der Bundesanstalt für Straßenwesen (BASt) und dem Rheinisch-Westfälischen TÜV wurde 1988/89 eine Pilotstudie zum Einfluss der Korrosion auf die passive Sicherheit von Pkw bei drei unterschiedlichen Fahrzeugtypen durchgeführt. Es wurde je ein dem Alter entsprechend durchschnittlich durch Korrosion geschädigtes älteres und ein möglichst gering geschädigtes jüngeres Fahrzeug bezüglich des Korrosionszustandes vermessen und im Aufprallversuch getestet. Bei den von der BASt durchgeführten Wandaufpralltests versagten insbesondere bei den älteren Fahrzeugen sicherheitsrelevante Fahrzeugteile. Es wurde daraufhin beschlossen, die Pilotstudie mit der vorliegenden zweiten Untersuchung unter den folgenden zwei Vorgaben fortzuführen: - Verbreiterung der Datenbasis von Tests mit weiteren Fahrzeugtypen mit starker Korrosion. - Prüfung von Fahrzeugen des gleichen Typs wie in der Pilotstudie, jedoch sollten an ihnen Korrosionsschutzmaßnahmen verwirklicht sein, welche die Automobilindustrie mit Beginn der 80er Jahre in die Fertigung eingeführt hatte. Die stark korrodierten Fahrzeuge der jetzt vorliegenden Untersuchung zeigten ein ähnliches Versagensspektrum wie die stark korrodierten Fahrzeuge der Pilotstudie. An den korrosionsgeschützten und auch jüngeren Nachfolgemodellen der Fahrzeuge der Pilotstudie konnte kein korrosionsbedingter Einfluss auf die passive Fahzeugsicherheit mehr gefunden werden.
Rastanlagen an BAB - Verbesserung der Auslastung und Erhöhung der Kapazität durch Telematiksysteme
(2014)
Erhebungen im Auftrag des damaligen Bundesministeriums für Verkehr, Bau und Stadtentwicklung (BMVBS) im März 2008 belegten, dass auf und an den Bundesautobahnen etwa 14.000 Lkw-Parkstände fehlen. Neben der baulichen Schaffung neuer Parkstandkapazitäten fördert das Bundesministerium für Verkehr und digitale Infrastruktur (BMVI) auch den Einsatz telematischer Systeme zur besseren Auslastung und Kapazitätserhöhung auf Rastanlagen. Auch aufgrund unregelmäßiger Nachfrage ist ein Verteilen der Nachfrage innerhalb eines Streckenabschnitts erforderlich. Dies kann durch den Einsatz von Telematik geleistet werden. Zur Ermittlung der Belegung der Rastanlagen auf einem Streckenabschnitt werden diese mit Detektionstechnik ausgerüstet. Die detektierten Daten über die Belegung von Lkw-Parkständen werden zu Informationen aufbereitet. Diese Parkinformationen können über verschiedene Kommunikationswege (z. B. über elektronische Anzeigen an der Autobahn oder das Internet) den Lkw-Fahrern sowie den Logistikunternehmen übermittelt werden. Für die Güterverkehrsbranche bedeutet dies eine verbesserte Planbarkeit der Lenk- und Ruhezeiten der Lkw-Fahrer. Gleichzeitig soll mittels Parkinformationen eine gleichmäßigere Auslastung des Parkangebots an Bundesautobahnen (BAB) erzielt und somit das Auftreten gefährlicher Situationen durch verkehrsgefährdend abgestellte Fahrzeuge in den Zufahrten von Rastanlagen verhindert werden. Insgesamt ist somit von einer Erhöhung der Sicherheit für alle Verkehrsteilnehmer auf den BAB auszugehen. Bewährte Detektoren, wie Induktivschleifen, stehen auf Rastanlagen vor neuen Herausforderungen. Hierfür bedurfte es neuer technischer Entwicklungen, welche die besonderen Randbedingungen auf einer Rastanlage und die Anforderungen an die Informationsqualität von Parkinformationen berücksichtigen. Neue Detektoren wurden im Rahmen von Pilotprojekten der Bundesländer erprobt. Die Bundesanstalt für Straßenwesen (BASt) hat die Pilotprojekte unter wissenschaftlichen Gesichtspunkten mit dem Fokus einer zukünftigen Evaluierung begleitet. Dazu wurde ein einheitliches Bewertungsverfahren für Telematiksysteme auf Rastanlagen entwickelt. Das Bewertungsverfahren erlaubt - im Gegensatz zu Prüfungen gemäß Technischen Lieferbedingungen für Streckenstationen (TLS) -, den Fokus auf die Bewertung des Gesamtkonzeptes zu legen, d. h., das Zusammenspiel aus Detektion, Steuerungsverfahren und Kommunikation zum Verkehrsteilnehmer kann systematisch analysiert werden. Ergebnis bisheriger Tätigkeiten der BASt ist weiterhin die Entwicklung eines neuen Steuerungsverfahrens "Kompaktparken", welches das vorhandene Spektrum telematischer Systeme auf Rastanlagen sinnvoll ergänzt. Kompaktparken basiert auf der Idee, durch zeitliches Sortieren mehr parkende Fahrzeuge auf der Rastanlage zu platzieren, die Flächen von Fahrgassen einzusparen und geordnetes, sicheres Parken zu unterstützen. Als Koordinierungsstelle der deutschen Location Code List und Mitglied in der internationalen Traveller Information Services Association (TISA) unterstützt die BASt die Weiterentwicklung von Diensten zur Bereitstellung von Parkinformationen in die Fahrzeuge. Der vorliegende Bericht fasst den Stand der gewonnenen Erkenntnisse über Maßnahmen zur Auslastung und Erhöhung der Kapazität von Rastanlagen an BAB zusammen. Der Bericht basiert auf Literaturrecherchen, eigenen Untersuchungen und Tätigkeiten der BASt sowie Gesprächen mit Betreibern und Anbietern telematischer Systeme für Rastanlagen. Zunächst werden die derzeit eingesetzten Techniken für Detektion und Kommunikation sowie Steuerungsverfahren vorgestellt. Ergänzend werden mögliche, bislang noch nicht für das telematische Lkw-Parken eingesetzte Techniken betrachtet. Darauf aufbauend wurde ein Konzept entwickelt, wie zukünftig eine intelligente Streckensteuerung wirken kann. Diese soll im Gegensatz zu Parkinformationen für einzelne Rastanlagen die Belegung mehrerer Rastanlagen eines Streckenabschnitts berücksichtigen und Parkempfehlungen für die Nutzer ermöglichen. Dazu wird vom Stand der Technik ausgehend eine mögliche Realisierungsvariante beschrieben und der erforderliche Entwicklungsbedarf aufgezeigt. Vorschläge zur Gestaltung von Parkinformationen runden das Konzept ab. Es ist beabsichtigt, den Bericht im Sinne eines Maßnahmenkataloges mit fortschreitendem Erkenntnisstand zu aktualisieren. Er soll im Besonderen Betreibern und Dienstanbietern Orientierung bei der Systemgestaltung bieten. Gleichzeitig sollen Entwicklungen im Bereich fahrzeugseitiger Parkinformationen angestoßen werden. Das Bewertungsverfahren wiederum soll zukünftig eine vergleichende Bewertung von telematischen Systemen auf Rastanlagen ermöglichen und zu einer kontinuierlichen Verbesserung der Systeme beitragen. Zum Zeitpunkt der Berichtslegung stehen die abschließenden Ergebnisse der einheitlichen Bewertung der Detektoren in den Pilotprojekten aus und sind mit einer Fortschreibung des Berichts zu ergänzen.
Es wird zunächst eine Übersicht über typische Systembausteine und wesentliche Akteure für den Betrieb Intelligenter Verkehrssysteme (IVS) in Deutschland gegeben. Unter Verwendung der IVS-Systembausteine werden für die vier Systemsparten Intelligenter Verkehrssysteme - die Straßenverkehrstelematik, - die Verkehrsinformationsdienste, - die autonomen Fahrerassistenzsysteme und - die kooperativen Systeme einfache funktionale Anwendungsbeispiele skizziert und analysiert. Die Anwendungsbeispiele bilden den Ausgangspunkt für eine Rekombination der Systembausteine. Die so erreichte Auflösung der Systemgrenzen hin zur Modularisierung der einzelnen Szenarien liefert eine Vielzahl neuer Kombinationsmöglichkeiten der identifizierten Bausteine intelligenter Verkehrssysteme in einer Matrix. Der vorliegende Bericht verdeutlicht und veranschaulicht die Potenziale dieses Baukastens, benennt außerdem aber auch die noch zu bewältigenden Herausforderungen im organisatorischen, funktionalen und technischen Bereich. Der Bericht ist als Grundlagenarbeit zu verstehen, die in eine Vielzahl weiterführender Aktivitäten in Deutschland als harmonisierte Analyse eingeflossen ist und noch einfließen wird.
Der vom 01.01.2012 bis zum 31.12.2016 andauernde Feldversuch der Bundesregierung mit Lang-Lkw wird durch die Bundesanstalt für Straßenwesen (BASt) wissenschaftlich begleitet. Lang-Lkw sind Fahrzeuge und Fahrzeugkombinationen, - die mit bis zu 25,25 m zwar länger als nach den geltenden Regelungen ausgeführt sein dürfen, - im Vergleich zu herkömmlichen Lkw um bis zu 6,50 m länger sind, - aber kein höheres Gesamtgewicht als die auch heute schon geltenden 40 t beziehungsweise 44 t im Vor- und Nachlauf zum Kombinierten Verkehr haben. Im Feldversuch werden die Chancen und Risiken des Einsatzes der Lang-Lkw untersucht. Nach etwa der Hälfte des Feldversuchs wurden die wesentlichen Erkenntnisse aus dem bisherigen Untersuchungszeitraum in einem Zwischenbericht von der BASt zusammengefasst und bewertet. Der Zwischenbericht der BASt gliedert sich thematisch und enthält neben den für die Konzeption der Gesamtuntersuchung erforderlichen rechtlichen Grundlagen und vorliegenden Erkenntnissen aus der Literatur insbesondere die Zusammenfassungen verschiedener Forschungsprojekte zu den hinsichtlich des Einsatzes von Lang-Lkw relevanten Fragestellungen. Die Teilprojekte, die von externen Forschungsnehmern bearbeitet wurden, sind als selbstständige Publikationen verfügbar. Dort finden sich detailliertere Informationen zu den einzelnen Untersuchungen. Insgesamt galt es herauszuarbeiten, welche Auswirkungen der Einsatz von Lang-Lkw im Vergleich zur Situation ohne Lang-Lkw auf die identifizierten Fragestellungen hat. Zusammenfassend lässt sich feststellen, dass sich neben den festgestellten positiven Effekten, wie einem Effizienzgewinn und der Einsparung von Lkw-Fahrten, gravierende Probleme im Feldversuch unter den gegebenen Randbedingungen bislang nicht gezeigt haben. Gemessen an der Vielzahl betrachteter Fragestellungen ist die Anzahl der identifizierten Risiken gering. Zudem sind die identifizierten Risiken bei der derzeit vorhandenen Anzahl von im Feldversuch beteiligten Lang-Lkw und auch noch unter der Annahme von deutlich höheren Anteilen von Lang-Lkw am Güterverkehrsaufkommen als hinnehmbar oder zumindest beherrschbar einzustufen. Einzig für den Umstand der für Lang-Lkw in der Regel zu kurzen Schrägparkstände auf Rastanlagen müssten bei einer steigenden Anzahl an Lang-Lkw Lösungsansätze entwickelt werden, um das regelkonforme Abstellen der Lang-Lkw auch auf Rastanlagen weiterhin gewährleisten zu können. Zu beachten ist hinsichtlich der Gesamteinschätzung zudem, dass den erzielten Ergebnissen in der Regel die ganz spezifischen Randbedingungen des Feldversuchs zugrunde liegen. Teilweise resultieren diese Randbedingungen aus den Vorgaben der Ausnahme-Verordnung zum Feldversuch, in Einzelfällen auch aus dem unter Versuchsbedingungen angepassten Verhalten der Lang-Lkw-Fahrer. Sofern sich an diesen Randbedingungen Änderungen einstellen sollten oder die Unternehmen die heute geltenden Freiheitsgrade deutlicher ausnutzen, sind gewisse Fragestellungen neu zu beleuchten. Somit zeigt der Zwischenbericht in seinem Fazit zusammenfassend auf, dass an einzelnen Punkten weiter Forschungsbedarf besteht. Bis zum Ende des Feldversuchs wird die BASt diesen Fragen nachgehen und Nacherhebungen zur Validierung der bisherigen Ergebnisse durchführen können.
Past European collaborative research involving government bodies, vehicle manufacturers and test laboratories has resulted in a prototype barrier face called the Advanced European Mobile Deformable Barrier (AE-MDB) for use in a new side impact test procedure . This procedure offers a better representation of the current accident situation and, in particular, the barrier concept is a better reflection of front-end stiffness seen in today- passenger car fleet compared to that of the current legislative barrier face. Based on the preliminary performance corridors of the prototype AE-MDB, a refined AE-MDB specification has been developed. A programme of barrier to load cell wall testing was undertaken to complete and standardise the AE-MDB specification. Barrier faces were supplied by the four leading manufacturers to demonstrate that the specification could be met by all. This paper includes background, specification and proof of compliance.
At the 2001 ESV-Conference the EEVC working group on compatibility (WG 15) reported the first phase of the research work to investigate the major factors influencing compatibility between passenger cars. Following this, WG15 performed an interim study, which was partly subventioned by the European Commission, the results of which are reported in this paper. In the next phase of work, it is intended to complete the development of a suite of test procedures and associated performance criteria to assess the compatibility of passenger cars in frontal impacts The main areas of work for the interim study were: - in depth accident data analysis - the development of methods to assess the potential benefit of improved compatibility - crash testing. The accident analysis identified the major compatibility problems to be poor structural interaction, stiffness mismatching and compartment strength. Different methods to assess the potential benefit of improved compatibility were applied to in depth accident data. Full scale crash testing including a car to car test was performed to help develop the following candidate compatibility test procedures: - a full width wall test with a deformable aluminium honeycomb face and a high resolution load cell wall - an offset barrier test with the EEVC barrier face and a high resolution load cell wall - an offset barrier test with the progressively deformable barrier (PDB) face. The results of the interim study will be presented in detail and the proposed methodology of the next phase to complete the development of a suite of test procedures for the assessment of car to car compatibility in frontal impacts will be outlined
When the EEVC proposed the full-scale side impact test procedure, it recommended that consideration should be given to an interior headform test in addition. This was to evaluate areas of contact not assessed by the dummy. EEVC Working Group 13 has been researching the parameters of a possible European headform test procedure in four phases. Earlier stages of the research have been presented at previous ESV conferences. The conclusions from these have suggested that the US free motion headform should be used in any European test procedure and that it should be a free flight test, not guided. This research has now culminated in proposals for a European test procedure. This paper presents the proposed EEVC side impact interior headform test procedure, giving the rationale for the test and the first results from the validation phase of the test protocol.
The development of tyre- and truck-manufacturers leads to the direction to introduce wide base single tyres (size 495/45R22,5) instead of twin tyres on the driving axle of trucks, tractors and busses. To study the driving behaviour and safety of various trucks and units with different tyre combinations and loading conditions was the aim of the study. A computer-aided simulation was used for this investigation. Drive tests with a 40 t unit with prototype single tyres on the drive axle were carried out to verify the simulation. Alterations in driving behaviour and driving safety are mainly dependent on the tyre cornering stiffness. The prototype wide single tyres had a higher lateral stiffness which leads to a higher degree of under-steering (safer driving behaviour). The altered spring base on the drive axle had no influence on the side- tilt stability of vehicle combinations but the solo truck profited from the higher rear axle roll stiffness (less danger for roll-over accidents). As far as the driving safety is concerned nothing speaks against wide base tyres on the drive axle. The simulation of a tyre defect in a bend (assuming 40% of the max. transferable side force for the flat tyre) showed no increased danger using wide single tyres. Later driving tests showed however the need of tyre run flat possibilities to avoid jack-knifing of road trains. Also tyre pressure monitoring systems and electronic stability programs for the trucks are advised.
The frontal crash is still an important contributor to deaths and serious injured resulting from road accidents in Europe. As the Hybrid-III dummy used in crash tests is over two decades old, the European Enhanced Vehicle-safety Committee is studying the potential for a new test device. Key is the availability of a well-defined set of requirements that identifies the minimum level of biofidelity required for an advanced frontal dummy. In this paper, a complete set of frontal impact biofidelity requirements, consisting of references , description of test conditions and corridors, is presented.
The Swedish National Road Administration (SNRA), the Japanese Automobile Research Institute (JARI) and the Federal Highway Research Institute (BASt) are co-operating in the International Harmonized Research Activities on Intelligent Transportation Systems (IHRA-ITS). Under this umbrella a joint study was conducted. The overall objective of this study was to contribute to the definition and validation of a "battery of tools" which enables a prediction and an assessment of changes in driver workload due to the use of in-vehicle information systems (IVIS) while driving. In this sense \"validation\" means to produce empirical evidence from which it can be concluded that these methods reliably discriminate between IVIS which differ in terms of relevant features of the HMI-design. Additionally these methods should also be sensitive to the task demands imposed on the driver by the traffic situation and their interactions with HMI-design. To achieve these goals experimental validation studies (on-road and in the simulator) were performed in Sweden, Germany and Japan. As a common element these studies focused on the secondary task methodology as an approach to the study of driver workload. In a joint German-Swedish on-road study the Peripheral Detection Task (PDT) was assessed with respect to its sensitivity to the complexity of traffic situations and effects of different types of navigation systems. Results show that the PDT performance of both the German and the Swedish subjects reflects the task demands of the traffic situations better than those of the IVIS. However, alternative explanations are possible which will be examined by further analyses. Results of this study are supplemented by the Japanese study where informational demands induced by various traffic situations were analysed by using a simple arithmetic task as a secondary task. Results of this study show that relatively large task demands can be expected even from simple traffic situations.
The European Enhanced Vehicle-safety Committee (EEVC) Working Group 13 for Side Impact Protection has been developing an Interior Headform Test Procedure to complement the full-scale Side Impact Test Procedure for Europe and for the proposed IHRA test procedures. In real world accidents interior head contacts with severe head injuries still occur, which are not always observed in standard side impact tests with dummies. Thus a means is needed to encourage further progress in head protection. At the 2003 ESV-Conference EEVC Working Group 13 reported the results on Interior Headform Testing. Further research has been performed since and the test procedure has been improved. This paper gives an overview of its latest status. The paper presents new aspects which are included in the latest test procedure and the research work leading to these enhancements. One topic of improvement is the definition of the Free Motion Headform (FMH) impactor alignment procedure to provide guidelines to minimize excessive headform chin contact and to minimize potential variability. Research activities have also been carried out on the definition of reasonable approach head angles to avoid unrealistic test conditions. Further considerations have been given to the evaluation of head airbags, their potential benefits and a means of ensuring protection for occupants regardless of seating position and sitting height. The paper presents the research activities that have been made since the last ESV Conference in 2003 and the final proposal of the EEVC Headform Test Procedure.
The European Enhanced Vehicle-safety Committee wants to promote the use of more biofidelic child dummies and biomechanical based tolerance limits in regulatory and consumer testing. This study has investigated the feasibility and potential impact of Q-dummies and new injury criteria for child restraint system assessment in frontal impact. European accident statistics have been reviewed for all ECE-R44 CRS groups. For frontal impact, injury measures are recommended for the head, neck, chest and abdomen. Priority of body segment protection depends on the ECE-R44 group. The Q-dummy family is able to reflect these injuries, because of its biofidelity performance and measurement capabilities for these body segments. Currently, the Q0, Q1, Q1.5, Q3 and Q6 are available representing children of 0, 1, 1.5, 3 and 6 years old. These Q-dummies cover almost all dummy weight groups as defined in ECE-R44. Q10, representing a 10 year-old child, is under development. New child dummy injury criteria are under discussion in EEVC WG12. Therefore, the ECE-R44 criteria are assessed by comparing the existing P-dummies and new Q-dummies in ECE-R44 frontal impact sled tests. In total 300 tests covering 30 CRSs of almost all existing child seat categories are performed by 11 European organizations. From this benchmark study, it is concluded that the performance of the Q-dummy family is good with respect to repeatability of the measurement signals and the durability of the dummies. Applying ECE-R44 criteria, the first impression is that results for P- and Q-dummy are similar. For child seat evaluation the potential merits of the Q-dummy family lie in the extra measurement possibilities of these dummies and in the more biofidelic response.
In the EC FP6 Integrated Project Advanced Protection Systems, APROSYS, the first WorldSID small female prototype was developed and evaluated by BASt, FTSS, INRETS, TRL and UPM-INSIA during 2006 and 2007. Results were presented at the ESV 2007 conference (Been et al., 2007). With the prototype dummy scoring a biofidelity rating higher than 6.7 out of 10 according to ISO/TR9790, the results were very promising. Also opportunities for further development were identified by the evaluation group. A revised prototype, Revision1, was subsequently developed in the 2007-2008 period to address comments from the evaluation group. The Revision1 dummy includes changes in the half arms and the suit (anthropometry and arm biomechanics), the thorax and abdomen ribs and sternum (rib durability), the abdomen/lumbar area and the lower legs (mass distribution). Also a two-dimensional chest deflection measurement system was developed to measure deflection in both lateral and anterior-posterior direction to improve oblique thorax loading sensitivity. Two Revision1 prototype dummies have now been evaluated by FTSS, TRL, UPM-INSIA and BASt. The updated prototype dummies were subjected to an extensive matrix of biomechanical tests, such as full body pendulum tests and lateral sled impact tests as specified by Wayne State University, Heidelberg University and Medical College of Wisconsin. The results indicated a significant improvement of dummy biofidelity. The overall dummy biofidelity in the ISO rating system has significantly improved from 6.7 to 7.6 on a scale between 0-10. The small female WorldSID has now obtained the same biofidelity rating as the WorldSID mid size male dummy. Also repeatability improved with respect to the prototype. In conclusion the recommended updates were all executed and all successfully contributed in achieving improved performance of the dummy.
Powered Two Wheelers (PTWs) accidents constitute one of the road safety problems in Europe. PTWs fatalities represent 22% at EU level in 2006, having increased during last years, representing an opposite trend compared to other road users" figures. In order to reduce these figures it is necessary to investigate the accident causation mechanisms from different points of view (e.g.: human factor, vehicle characteristics, influence of the environment, type of accident). SAFERIDER project ("Advanced telematics for enhancing the SAFEty and comfort of motorcycle RIDERs", under the European Commission "7th Framework Program") has investigated PTW accident mechanisms through literature review and statistical analyses of National and In-depth accident databases; detecting and describing all the possible PTW's accident configurations where the implementation of ADAS (Advanced Driver Assistance Systems) and IVIS (In-Vehicle Information Systems) could contribute to avoid an accident or mitigate its severity. DIANA, the Spanish in-depth database developed by CIDAUT, has been analyzed for that purpose. DIANA comprises of accident investigation teams, in close cooperation with police forces, medical services, forensic surgeons, garages and scrap yards. An important innovation is the fact that before injured people arrive to hospitals, photographs and explanations about the possible accident injury mechanisms are sent to the respective hospitals (via 3G GPRS technology). By this, additional information to medical staff can be provided in order to predict in advance possible internal injuries and select the best medical treatment. This methodology is presented in this paper. On the other hand, the main results (corresponding to road, rider and PTW characteristics; pre and post-accident manoeuvres; road layout; rider behaviour; impact points; accident causations;...) from the analyses of the PTW accidents used for SAFERIDER are shown. Only accident types relevant to ADAS and IVIS devices have been considered.
A legform impactor with biofidelic characteristics (FlexPLI) which is being developed by the Japanese Automobile Research Institute (JARI) is being considered as a test tool for legislation within a proposed Global Technical Regulation on pedestrian protection (UNECE, 2006) and therefore being evaluated by the Technical Evaluation Group (TEG) of GRSP. In previous built levels it already showed good test results on real cars as well as under idealised test conditions but also revealed further need for improvement. A research study at the Federal Highway Research Institute (BASt) deals with the question on how leg injury risks of modern car fronts can be revealed, reflected and assessed by the FlexPLI and how the impactor can be used and implemented as a legislative instrument for the type approval of cars according to current and future legislations on pedestrian protection. The latest impactor built level (GTα ) is being evaluated by a general review and assessment of the certification procedure, the knee joint biofidelity and the currently proposed injury criteria. Furthermore, the usability, robustness and durability as a test tool for legislation is examined and an assessment of leg injuries is made by a series of tests with the FlexPLI on real cars with modern car front shapes as well as under idealised test conditions. Finally, a comparison is made between the FlexPLI and the current european legislation tool, the legform impactor according to EEVC WG 17.
The use of proper child restraint systems (CRS) is mandatory for children travelling in cars in most countries of the world. The analysis of the quantity of restrained children shows that more than 90% of the children in Germany are restrained. Looking at the quality of the protection, a large discrepancy between restrained and well protected children can be seen. Two out of three children in Germany are not properly restrained. In addition, considerable difference exists with respect to the technical performance of CRS. For that reason investigations and optimisations on two different topics are necessary: The technical improvement of CRS and the ease of use of CRS. Consideration of the knowledge gained by the comparison of different CRS in crash tests would lead to some improvements of the CRS. But improvement of child safety is not only a technical issue. People should use CRS in the correct way. Misuse and incorrect handling could lead to less safety than correct usage of a poor CRS. For that reason new technical issues are necessary to improve the child safety AND the ease of use. Only the combination of both parts can significantly increase child safety. For the assessment of the safety level of common CRS, frontal and lateral sled tests simulating different severity levels were conducted comparing pairs of CRS which were felt to be good and CRS which were felt to be poor. The safety of some CRS is currently at a high level. All well known products were not damaged in the performed tests. The performance of non-branded CRS was mostly worse than that of the well known products. Although the branded child restraint systems already show a high safety level it is still possible to further improve their technical performance as demonstrated with a baby shell and a harness type CRS.
As set out in the Terms of Reference, the objective of European Enhanced Vehicle-safety Committee (EEVC) Working Group (WG) 15 Car Crash Compatibility and Frontal Impact is to develop a test procedure(s) with associated performance criteria for car frontal impact compatibility. This work should lead to improved car to car frontal compatibility and self protection without decreasing the safety in other impact configuration such as impacts with car sides, trucks, and pedestrians. Since 2003, EEVC WG 15 served as a steering group for the car-to-car activities in the "Improvement of Vehicle Crash Compatibility through the development of Crash Test Procedures" (VC-COMPAT) project that was finalised at the end of 2006 and partly funded by the European Commission. This paper presents the research work carried out in the VC-COMPAT project and the results of its assessment by EEVC WG 15. Other additional work presented by the UK and French governments and industry " in particular the European industry - was taken into consideration. It also identifies current issues with candidate testing approaches. The candidate test approaches are: - an offset barrier test with the progressive deformable barrier (PDB) face in combination with a full width rigid barrier test - a full width wall test with a deformable aluminium honeycomb face and a high resolution load cell wall supplemented by the forces measured in the offset deformable barrier (ODB) test with the current EEVC barrier. These candidate test approaches must assess the structural interaction and give information of frontal force levels and compartment strength for passenger vehicles. Further, this paper presents the planned route map of EEVC WG 15 for the evaluation of the proposed test procedures and assessment criteria.
At the 2005 ESV conference, the International Harmonisation of Research Activities (IHRA) side impact working group proposed a 4 part draft test procedure, to form the basis of harmonisation of regulation world-wide and to help advances in car occupant protection. This paper presents the work performed by a European Commission 6th framework project, called APROSYS, an further development and evaluation of the proposed procedure from a European perspective. The 4 parts of the proposed procedure are: - A Mobile Deformable Barrier test; - An oblique Pole side impact test; - Interior headform tests; - Side Out of Position (OOP) tests. Full scale test and modelling work to develop the Advanced European Mobile Deformable Barrier (AE-MDB) further is described, resulting in a recommendation to revise the barrier face to include a bumper beam element. An evaluation of oblique and perpendicular pole tests was made from tests and numerical simulations using ES-2 and WorldSID 50th percentile dummies. It was concluded that an oblique pole test is feasible but that a perpendicular test would be preferable for Europe. The interior headform test protocol was evaluated to assess its repeatability and reproducibility and to solve issues such as the head impact angle and limitation zones. Recommendations for updates to the test protocol are made. Out-of-position (OOP) tests applicable for the European situation were performed, which included additional tests with Child Restraint Systems (CRS) which use is mandatory in Europe. It was concluded that the proposed IHRA OOP tests do cover the worst case situations, but the current test protocol is not ready for regulatory use.
The PDB, BASt and Opel conducted two test series to evaluate possible effects on the results obtained using the EEVC WG17 Lower Legform Impactor as a test tool for the assessment of pedestrian safety. The reproducibility and repeatability of the test results were assessed using six legform impactors while keeping the test parameters constant. In the second series one impactor was used and the test parameters were varied to assess the effects on the readings of the legform. The test parameters were velocity, temperature, relative humidity, the point of first contact regarding the deviation in z-direction and the deviations of the pitch, roll and yaw angle. The tests were performed using an inverse setup, i.e. the legform was hit by a guided linear impactor equipped with a honeycomb deformation element. This setup was chosen to be able to vary each single parameter while avoiding variations of the other test parameters at the same time. The test parameters were varied stronger than allowed in regulatory use in order to determine possible dependencies between the parameters and the readings which were acceleration, bending angle and shear displacement.