91 Fahrzeugkonstruktion
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (82) (entfernen)
Schlagworte
- Conference (27)
- Konferenz (26)
- Test method (26)
- Prüfverfahren (25)
- Safety (25)
- Sicherheit (25)
- Anfahrversuch (24)
- Impact test (veh) (24)
- Bewertung (22)
- Evaluation (assessment) (22)
- Fahrzeug (22)
- Fußgänger (22)
- Pedestrian (22)
- Vehicle (21)
- Anthropometric dummy (16)
- Collision (16)
- Dummy (16)
- Accident (15)
- Simulation (15)
- Unfall (15)
- Zusammenstoß (14)
- Frontalzusammenstoß (12)
- Deutschland (11)
- Germany (11)
- Head on collision (11)
- Analyse (math) (10)
- Analysis (math) (10)
- Driver assistance system (10)
- Fahrerassistenzsystem (10)
- Schweregrad (Unfall, Verletzung) (10)
- Biomechanics (9)
- Biomechanik (9)
- Car (9)
- Child (9)
- Kind (9)
- Passives Sicherheitssystem (9)
- Radfahrer (9)
- Severity (accid, injury) (9)
- Active safety system (8)
- Aktives Sicherheitssystem (8)
- Autonomes Fahren (8)
- Autonomous driving (8)
- Europa (8)
- Europe (8)
- Kompatibilität (8)
- Passive safety system (8)
- Technische Vorschriften (Kraftfahrzeug) (8)
- Vehicle regulations (8)
- Versuch (8)
- Automatic (7)
- Automatisch (7)
- Compatibility (7)
- Cyclist (7)
- Driver (7)
- Fahrer (7)
- Forschungsarbeit (7)
- Improvement (7)
- Pkw (7)
- Research project (7)
- Test (7)
- Verbesserung (7)
- Bemessung (6)
- Design (overall design) (6)
- Seitlicher Zusammenstoß (6)
- Severity (accid (6)
- Side impact (6)
- Standardisierung (6)
- Wirtschaftlichkeitsrechnung (6)
- injury) (6)
- Collision avoidance system (5)
- Cost benefit analysis (5)
- Deformierbare Barriere (Anpralltest) (5)
- Fahrstabilität (5)
- Gesetzgebung (5)
- Head (5)
- Injury (5)
- Insasse (5)
- Knee (human) (5)
- Kopf (5)
- Legislation (5)
- Lkw (5)
- Lorry (5)
- Official approval (5)
- Vehicle handling (5)
- Vehicle occupant (5)
- Verletzung (5)
- Verletzung) (5)
- Accident prevention (4)
- Antikollisionssystem (4)
- Brustkorb (4)
- Datenbank (4)
- Development (4)
- Efficiency (4)
- Entwicklung (4)
- Leistungsfähigkeit (allg) (4)
- Modification (4)
- Prevention (4)
- Reproducibility (4)
- Reproduzierbarkeit (4)
- Schweregrad (Unfall (4)
- Standardization (4)
- Technologie (4)
- Technology (4)
- Thorax (4)
- Unfallverhütung (4)
- Alte Leute (3)
- Aufprallschlitten (3)
- Ausrüstung (3)
- Bein (menschl) (3)
- Belastung (3)
- Benutzung (3)
- Body (car) (3)
- Database (3)
- Decrease (3)
- Deformable barrier (impact test) (3)
- Deformation (3)
- EU (3)
- Equipment (3)
- Error (3)
- Fahrzeugführung (3)
- Fahrzeuginnenraum (3)
- Fahrzeugsitz (3)
- Fehler (3)
- Human body (3)
- Impact sled (3)
- Intelligent transport system (3)
- Interior (veh) (3)
- Karosserie (3)
- Knie (menschl) (3)
- Leg (human) (3)
- Lenken (Fahrzeug) (3)
- Load (3)
- Menschlicher Körper (3)
- Method (3)
- Motorcycle (3)
- Motorrad (3)
- Safety belt (3)
- Seat (veh) (3)
- Sicherheitsgurt (3)
- Steering (process) (3)
- Unterfahrschutz (3)
- Use (3)
- Verfahren (3)
- Verhütung (3)
- Verminderung (3)
- Veränderung (3)
- Active safety (2)
- Airbag (2)
- Aktive Sicherheit (2)
- Autonomes Fahrzeug (2)
- Autonomous vehicle (2)
- Baumusterzulassung (2)
- Behaviour (2)
- Bicyclist (2)
- Braking (2)
- Bremsung (2)
- Cause (2)
- Classification (2)
- Crashtest (2)
- Data acquisition (2)
- Datenerfassung (2)
- Detection (2)
- Detektion (2)
- Driver information (2)
- Driving (veh) (2)
- Empfindlichkeit (2)
- Fahrerinformation (2)
- Fatality (2)
- Forecast (2)
- Front (2)
- Geschwindigkeit (2)
- Gewicht (2)
- Headlamp (2)
- Hinten (2)
- Impact test (2)
- Individueller Verkehr (2)
- Information (2)
- Intelligentes Transportsystem (2)
- International (2)
- Klassifizierung (2)
- Knie (2)
- Kraftfahrzeug (2)
- Mathematical model (2)
- Measurement (2)
- Messung (2)
- Nacht (2)
- Night (2)
- Norm (tech) (2)
- Old people (2)
- Private transport (2)
- Prognose (2)
- Prototyp (2)
- Prototype (2)
- Rear (2)
- Rechenmodell (2)
- Richtlinien (2)
- Risiko (2)
- Risk (2)
- Road user (2)
- Sample (mater) (2)
- Scheinwerfer (2)
- Schutz (2)
- Sensitivity (2)
- Sensor (2)
- Specification (standard) (2)
- Specifications (2)
- Speed (2)
- Statistics (2)
- Statistik (2)
- Tödlicher Unfall (2)
- Underride protection (2)
- Unfallrekonstruktion (2)
- Ursache (2)
- Vereinigtes Königreich (2)
- Verformung (2)
- Verhalten (2)
- Verkehrsteilnehmer (2)
- Warning (2)
- Warnung (2)
- Weight (2)
- Zulassung (tech) (2)
- Zusammenstoss (2)
- Abdomen (1)
- Abstandsregeltempomat (1)
- Accident data (1)
- Accident rate (1)
- Accident reconstruction (1)
- Adaptive cruise control (1)
- Adult (1)
- Aged people (1)
- Air bag (restraint system) (1)
- Angle (1)
- Anti locking device (1)
- Antiblockiereinrichtung (1)
- Antikollisisonssystem (1)
- Apparatus (measurement) (1)
- Arbeitsgruppe (1)
- Auffahrunfall (1)
- Autobahn (1)
- Battery (1)
- Bau (1)
- Benefit cost analysis (1)
- Bicycle (1)
- Bildschirm (1)
- Blind spot (veh) (1)
- Brake (1)
- Bremse (1)
- Bruch (mech) (1)
- Bus (1)
- Calibration (1)
- Chassis (1)
- Comfort (1)
- Communication (1)
- Compatiblity (1)
- Components of the vehicle (1)
- Compression (1)
- Construction (1)
- Cooperative intelligent transport system (1)
- Correlation (math, stat) (1)
- Crash Test (1)
- Crash helmet (1)
- Crossing the road (pedestrian) (1)
- Data bank (1)
- Data processing (1)
- Data security (1)
- Data transmission (1)
- Datensicherheit (1)
- Datenverarbeitung (1)
- Datenübertragung (telekom) (1)
- Dauerhaftigkeit (1)
- Daylight (1)
- Deformable barrier (Impact test) (1)
- Deformable barrier system (impact test) (1)
- Dehnungsmessstreifen (1)
- Delivery vehicle (1)
- Demographie (1)
- Diesel engine (1)
- Dieselmotor (1)
- Digital model (1)
- Driving (1)
- Durability (1)
- Dynamo (1)
- Echtzeit (1)
- Eichung (1)
- Electric vehicle (1)
- Electronic stability program (1)
- Elektrofahrzeug (1)
- Elektronische Fahrhilfe (1)
- Elektronisches Stabilitätsprogramm (1)
- Emission control (1)
- Emissionskontrolle (1)
- Engine capacity (1)
- Ergonomics (1)
- Erwachsener (1)
- European New Car Assessment Programme (1)
- Fahrbahnüberquerung (1)
- Fahrleistung (1)
- Fahrrad (1)
- Fahrstreifen (1)
- Fahrstreifenwechsel (1)
- Fahrwerk (1)
- Fahrzeugbeleuchtung (1)
- Fahrzeugteile (1)
- Failure (1)
- Feuer (1)
- Finite element method (1)
- Fire (1)
- Form (1)
- Frau (1)
- Future transport mode (1)
- Gestaltung (1)
- Grenzwert (1)
- Harmonisation (1)
- Harmonisierung (1)
- Harmonization (1)
- Head (human) (1)
- Height (1)
- Hubraum (1)
- Höhe (1)
- Hüfte (menschl) (1)
- Impact study (1)
- In Bewegung (1)
- Information documentation (1)
- Information management (1)
- Intelligentes Verkehrssystem (1)
- Interactive model (1)
- Interaktives Modell (1)
- Intersection (1)
- Kamera (1)
- Kleintransporter (1)
- Knotenpunkt (1)
- Komfort (1)
- Kommunikation (1)
- Kompatiblität (1)
- Kooperatives System (ITS) (1)
- Kopf (menschl) (1)
- Korrelation (math, stat) (1)
- Kunststoff (1)
- Landstraße (1)
- Lane changing (1)
- Layout (1)
- Leuchtdichte (1)
- Limit (1)
- Luminance (1)
- Mensch Maschine Verhältnis (1)
- Messgerät (1)
- Methode der finiten Elemente (1)
- Motorway (1)
- Moving (1)
- Naturalistic Driving (1)
- Naturalistic driving (1)
- Numerisches Modell (1)
- Organisation (1)
- Organization (1)
- Overlapping (1)
- Pelvis (1)
- Perception (1)
- Pfahl (1)
- Pile (1)
- Plastic material (1)
- Population (1)
- Probe (1)
- Prüefverfahren (1)
- Prüfkörper (1)
- Public transport (1)
- Quality (1)
- Quality assurance (1)
- Qualität (1)
- Qualitätssicherung (1)
- Radio (1)
- Real time (1)
- Rear end collision (1)
- Rear view mirror (1)
- Reconstruction (accid) (1)
- Reflectorized material (1)
- Reflexstoffe (1)
- Reifen (1)
- Rippe (menschl) (1)
- Road traffic (1)
- Robot (1)
- Roboter (1)
- Route guidance (1)
- Rundfunk (1)
- Rural road (1)
- Rückspiegel (1)
- Schulter (1)
- Schutzhelm (1)
- Schweregrad /Unfall (1)
- Seite (1)
- Shape (1)
- Shoulder (human) (1)
- Sichtbarkeit (1)
- Side (1)
- Social factors (1)
- Soziale Faktoren (1)
- Stadardization (1)
- Stadt (1)
- Stand der Technik (Bericht) (1)
- State of the art report (1)
- Steifigkeit (1)
- Stiffness (1)
- Strain gauge (1)
- Straßenverkehr (1)
- Tageslicht (1)
- Technische Vorschriften (1)
- Telecommunication (1)
- Telekommunikation (1)
- Tests (1)
- Toter Winkel (1)
- Toxicity (1)
- Toxizität (1)
- Traffic (1)
- Traffic control (1)
- Traffic lanes (1)
- Train (1)
- Typenzulassung (1)
- Tyre (1)
- Underride prevention (1)
- Unfalldaten (1)
- Unfallhäufigkeit (1)
- United Kingdom (1)
- United kingdom (1)
- Unterleib (1)
- Urban area (1)
- Vehicle Regulations (1)
- Vehicle lighting (1)
- Vehicle mile (1)
- Veraenderung (1)
- Verkehr (1)
- Verkehrssteuerung (1)
- Video camera (1)
- Sichtbarkeit (1)
- Visual display (1)
- Vorn (1)
- Vorne (1)
- Wahrnehmung (1)
- Windschutzscheibe (1)
- Windscreen (veh) (1)
- Winkel (1)
- Wirkungsanalyse (1)
- Woman (1)
- Working group (1)
- Zielführungssystem (1)
- Zug (Eisenbahn) (1)
- Zukünftiges Verkehrsmittel (1)
- Zusammendrückung (1)
- Öffentlicher Verkehr (1)
- Überdeckung (1)
Institut
- Abteilung Fahrzeugtechnik (82) (entfernen)
Qualität von on-trip Verkehrsinformationen im Straßenverkehr : BASt-Kolloquium 23. und 24.03.2011
(2011)
Am 23. und 24. März 2011 veranstaltete die Bundesanstalt fuer Straßenwesen ein, um die Ergebnisse der erwähnten Projekte und Initiativen präsentieren zu lassen und mit anderen Experten zu diskutieren. Der vorliegende Tagungsband fasst die Ergebnisse des Kolloquiums zur "Qualität von on-trip Verkehrsinformationen" zusammen. Die Bereitstellung von Verkehrsinformationen ist geprägt von vielen Akteuren. Die Wertschöpfungskette beginnt bei der Sammlung grundlegender Verkehrsdaten zur Erstellung von Verkehrsinformationen und setzt sich mit der Datenverarbeitung und -interpretation bis hin zur Meldungserstellung fort. Die Weitergabe kann über verschiedene Übertragungsmedien erfolgen und beim Nutzer (z.B. im Navigationsgerät) empfangen werden. Jeder einzelne Schritt der Wertschoepfungskette kann sowohl von unterschiedlichen Partnern (privat oder öffentlich) übernommen werden als auch in der Hand eines Partners liegen. Diese Komplexität der Zusammenarbeit spiegelt sich demzufolge auch in Qualitätsmanagementprozessen wider. Im Rahmen des Kolloquiums wurden zwei wesentliche Qualitätsaspekte näher betrachtet: - die Datenqualität mit dem Focus auf Aktualitaet, Stimmigkeit der Daten verglichen mit einer gemessenen Realitaet sowohl zu Beginn der Wertschöpfungskette als auch an jeglichen Schnittstellen, - die Prozessqualität, welche sich insbesondere mit der reibungslosen Datenübergabe an den Schnittstellen der Wertschoepfungskette beschäftigt. Beide Qualitätsaspekte helfen zu verstehen, worin die heutigen Qualitätsprobleme bestehen und welche Massnahmen im Einzelnen ergriffen werden müssten, um eine nachhaltige Verbesserung zu erreichen. Einerseits kann es vorkommen, dass die Information über ein Verkehrsereignis an einer oder mehreren Stellen der Wertschöpfungskette korrekt vorliegt, jedoch durch ungenuegende technische oder organisatorische Schnittstellen im Prozessablauf wieder verloren geht und dem Nutzer folglich nicht zur Verfügung steht. Prominentes Beispiel eines solchen Problems in der Prozessqualität ist die fehlerhafte Interpretation der Meldung im Navigationsgerät, denkbar sind solche Informationsverluste jedoch an jeder Stelle der Wertschoepfungskette. Eine wichtige Massnahme zur Verbesserung der Prozessqualität ist die Standardisierung sowie die Überprüfung, ob die definierten Standards an jeder Stelle der Wertschöpfungskette eingehalten werden. Andererseits kann es vorkommen, dass die Datenqualität in Bezug auf ihre Genauigkeit von Anfang an so schlecht ist, dass der Nutzer eine fehlerhafte oder gar keine Nachricht übermittelt bekommt. Beispiel hierfür ist die Vielzahl von Stauereignissen, die entweder nicht gesendet wurden oder gesendet wurden, obwohl sie nicht vorhanden waren. Eine wichtige Massnahme zur Verbesserung dieser Situation ist die Verbesserung der Ereignisdetektion. Der Tagungsband enthaelt Präsentationen, die den Status Quo analysieren, Methoden zur verbesserten Datenerfassung vorschlagen und Möglichkeiten zur Verbesserung von Daten- und Prozessqualität vorstellen. Offen geblieben sind darüber hinaus folgende Fragestellungen: - Wie kann die Prozessqualität der gesamten Wertschöpfungskette bei der Vielzahl der Partner kontrolliert werden? Wer überwacht die Wertschöpfungskette? Wird hierfuer überhaupt eine zentrale Stelle benötigt? Oder ist es ausreichend, wenn jeder Partner eine angemessene Eingangs bzw. Ausgangskontrolle durchführt? - Obwohl es nur eine Realität gibt, entsteht doch Wettbewerb über die (Qualität der) Information zu dieser Realität. Wie kann Konsistenz zwischen allen Anbietern von sicherheitsrelevanten Informationen erreicht werden? Wo sollte der Wettbewerb enden und wie kann dies technisch, organisatorisch und wirtschaftlich realisiert werden? - Welche Prozesse sollten geschaffen werden, um Partner zu integrieren, die sich nicht an geschaffene Qualitätsstandards halten (z.B. kommerzielle Diensteanbieter, die nicht mit der Verkehrsinformationsszene vernetzt sind)? - Und nicht zuletzt, wie kann die Wahrnehmung des Nutzers über verschiedene Qualitätslevel unterschiedlicher Produkte verbessert werden? Ist der Nutzer in der Lage, die unterschiedlichen Qualitätsstufen von Verkehrssystemen zu unterscheiden? Falls nicht, welche Art von Unterstuetzung braucht der Kunde? Ein "European Information Services Assessment Programme" vergleichbar zu Euro NCAP für Fahrzeuge? Die Ergebnisse des Kolloquiums sollen die laufende Diskussion um die Verbesserung der Qualität von Verkehrsinformationen unterstützen.
The objective was to develop and validate a crash trolley (reference vehicle) equipped with a compartment and a full restraint system for driver and front seat passenger which can be used in full scale crash testing. Furthermore, the crash trolley should have a suspension to show rotation and nick effects similar to real vehicles. Within the development phase the reference vehicle was build based on a European family car. Special attention was needed to provide appropriate strength to the trolley and its suspension. The reference vehicle is equipped with a restraint system consisting of airbags, pedals, seats, dashboard, and windscreen. On the front of the vehicle different crash barriers can be installed to provide miscellaneous deceleration pulses. For the validation phase a series of low and high speed crash tests with HIII dummies were conducted and compared with full scale tests. For the comparison deceleration pulse, dummy numbers and vehicle movement were analyzed. Validation tests with velocities up to 60 km/h showed promising results. The compartment and the suspension systems stayed stable. Rotation effects were comparable with full scale car crash tests. The airbags and seat belt system worked reasonable. The acceleration pulse compared to an Euro NCAP test had a similar characteristic but was in general slightly lower. After the successful validation the reference vehicle is already in use in different studies in the field of vehicle safety research at BASt.
In the European Project FIMCAR, a proposal for a frontal impact test configuration was developed which included an additional full width deformable barrier (FWDB) test. Motivation for the deformable element was partly to measure structural forces as well as to produce a severe crash pulse different from that in the offset test. The objective of this study was to analyze the safety performance of vehicles in the full width rigid barrier test (FWRB) and in the full width deformable barrier test (FWDB). In total, 12 vehicles were crashed in both configurations. Comparison of these tests to real world accident data was used to identify the crash barrier most representative of real world crashes. For all vehicles, the airbag visible times were later in the FWDB configuration. This was attributed to the attenuation of the initial acceleration peak, observed in FWRB tests, by the addition of the deformable element. These findings were in alignment with airbag triggering times seen in real world crash data. Also, the dummy loadings were slightly worse in FWDB compared to FWRB tests, which is possibly linked to the airbag firing and a more realistic loading of the vehicle crash structures in the FWDB configuration. Evaluations of the lower extremities have shown a general increasing of the tibia index with the crash pulse severity.
Advancing active safety towards the protection of vulnerable road users: the PROSPECT project
(2017)
Accidents involving Vulnerable Road Users (VRU) are still a very significant issue for road safety. According to the World Health Organisation, pedestrian and cyclist deaths account for more than 25% of all road traffic deaths worldwide. Autonomous Emergency Braking Systems have the potential to improve safety for these VRU groups. The PROSPECT project (Proactive Safety for Pedestrians and Cyclists) aims to significantly improve the effectiveness of active VRU safety systems compared to those currently on the market by expanding the scope of scenarios addressed by the systems and improving the overall system performance. The project pursues an integrated approach: Newest available accident data combined with naturalistic observations and HMI guidelines represent key inputs for the system specifications, which form the basis for the system development. For system development, two main aspects are considered: advanced sensor processing with situation analysis, and intervention strategies including braking and steering. All these concepts are implemented in several vehicle prototypes. Special emphasis is put on balancing system performance in critical scenarios and avoiding undesired system activations. For system validation, testing in realistic scenarios will be done. Results will allow the performance assessment of the developed concepts and a cost-benefit analysis. The findings within the PROSPECT project will contribute to the generation of state -of-the-art knowledge, technical innovations, assessment methodologies and tools for advancing Advanced Driver Assistance Systems towards the protection of VRUs. The introduction of a new generation safety system in the market will enhance VRU road safety in 2020-2025, contributing to the "Vision Zero" objective of no fatalities or serious injuries in road traffic set out in the Transport White Paper. Furthermore, the test methodologies and tools developed within the project shall be considered for the New Car Assessment Programme (Euro NCAP) future roadmaps, supporting the European Commission goal of halving the road toll in the 2011-2020 timeframe.
According to the German road traffic regulations children up to the age of 12 or a height below 150 cm have to use approved and appropriate child restraint systems (CRS). CRS must be approved according to UN-ECE Regulation No. 44. The regulation classifies CRS in 5 weight categories. The upper weight group is approved for children from 22 to 36 kg. However, studies show that already today many children weigh more than 36 kg although they have not reached a height of 150 cm. Therefore, no ECE R44 approved CRS is available for these overweight children. In conclusion, today's sizes and weights of children are no longer represented by the current version of the ECE R44. The heaviest used dummy (P10) weighs just 32.6 kg and has a height of 137.9 cm. Statistical data of German children show that already 5% of the children at a height of 137.9 cm have a weight above 45.3 kg. Regarding children at a height of 145 cm, the 95th percentile limit is at a weight of 53.3 kg. Based on these data 4 dummies with different heights and weights were defined and produced. Two of them are overweight. Up to now, there is no experience how current child restraint systems perform in a car crash if they are used by children with a weight above 36 kg and a height smaller than 150 cm. In the future, different child restraint systems will be tested with respect to the ECE R44 regulation using these overweight dummies.
The UN Regulation No. 79 is going to be amended to allow automatically commanded steering functions (ACSF) at speeds above 10 km/h. Hence, requirements concerning the approval of automatically performed steering manoeuvres have to be set in order to allow safe use of automatic steering on public roads as well as improve overall road safety for the driver and the surroundings. By order of the German Federal Ministry of Transport and Digital Infrastructure (BMVI), BASt developed and verified physical test procedures for automatic steering to be implemented in UN Regulation No. 79. The usability of currently available test tools was examined. The paper at hand describes these test procedures and presents results from verification tests. The designated tests are divided in three sections: functionality tests, verifications for the transition of control and emergency tests. System functionality tests are auto matic lane keeping, automatic lane change and an automatic abort of an initiated lane change due to traffic. Those tests check if the vehicle remains in its lane (under normal operating conditions), is able to perform safe automatic lane change manoeuvres and if it considers other road users during its manoeuvres. Transition tests examine the vehicle's behaviour when the driver fails to monitor the system and in situations when the system has to hand over the steering control back to the driver. For instance these tests provoke driver-in-the-loop requests by approaching system boundary limitations, like missing lane markings, surpassing maximum lateral acceleration in a bend or even a major system failure. Even further the driver and his inputs are monitored and if the system detects that he is overriding system actions or contrary want to quit the driving task and unfastens the seat belt, it has to shut down and put the human back into manually control and the responsibility of driving. The last series of test consists of two emergency situations in which the system has to react to a time critical event: A hard decelerating vehicle and a stationary vehicle in front both with no lane change possibility for the ACSF vehicle. Some of the tests, especially the emergency manoeuvres, require special target vehicles and propulsion systems. Since no fully automatic steering vehicles are available, a current Mercedes E-Class with Mercedes' "drive pilot" system was used. It was shown that the vehicle is automatically able to brake to a full stop towards a static Euro NCAP target from partial-automatic driving at 90 km/h, that it could brake towards a rapidly decelerating lead vehicle when travelling at 70 km/h, that it was able during partially automatic driving to remain in its lane in normal operation conditions and to perform a automatic (driver initiated) lane change while surveilling the driver- activities.
Die Kommunikation zwischen Fahrzeugen und Infrastrukturkomponenten steht vor der Einführung in Europa. Dieser Beitrag stellt zunächst die grundlegende Technologie zum Austausch von Nachrichten und ein Pilotprojekt vor, innerhalb dessen eine sichere Fahrzeug-zu-Infrastruktur Kommunikation konzipiert und praktisch erprobt wird. Darauf aufbauend werden Sicherheitsfragestellungen von Infrastrukturkomponenten beleuchtet und ein Einblick in das Schlüsselmanagement sowohl für Fahrzeuge als auch Infrastrukturkomponenten gegeben.
Regarding to the German road traffic licensing regulations it is mandatory to have a light system using a bicycle in public traffic. All attached components must be approved. The admission requires additional restrictions such as a dynamo as energy source with a nominal voltage of 6 V. Batteries are only allowed in addition to this. To adopt the German bicycle regulation to the state of art of an energy efficient lighting, additional power sources such as a battery respectively rechargeable batterie should be evaluated. The project will propose amendments for German Road Traffic Regulations and technical requirements.
The head impact of pedestrians in the windscreen area shows a high relevance in real-world accidents. Nevertheless, there are neither biomechanical limits nor elaborated testing procedures available. Furthermore, the development of deployable protection systems like pop-up bonnets or external airbags has made faster progress than the corresponding testing methods. New requirements which are currently not considered are taken into account within a research project of BASt and the EC funded APROSYS (Advanced PROtection SYStems) integrated project relating to passive pedestrian protection. Testing procedures for head impact in the windscreen area should address these new boundary conditions. The presented modular procedure combines the advantages of virtual testing, including full-scale multi-body and finite element simulations, as well as hardware testing containing impactor tests based on the existing procedures of EEVC WG 17. To meet the efforts of harmonization in legislation, it refers to the Global Technical Regulation of UNECE (GTR No. 9). The basis for this combined hardware and virtual testing procedure is a robust categorization covering all passenger cars and light commercial vehicles and defining the testing zone including the related kinematics. The virtual testing part supports also the choice of the impact points for the hardware test and determines head impact timing for testing deployable systems. The assessment of the neck rotation angle and sharp edge contact in the rear gap of pop-up bonnets is included. For the demonstration of this procedure, a hardware sedan shaped vehicle was modified by integrating an airbag system. In addition, tests with the Honda Polar-II Dummy were performed for an evaluation of the new testing procedure. Comparing these results, it was concluded that a combination of simulation and updated subsystem tests forms an important step towards enhanced future pedestrian safety systems considering the windscreen area and the deployable systems.
Side-impact safety of passenger cars is assessed in Europe in a full-scale test using a moving barrier. The front of this barrier is deformable and represents the stiffness of an 'average' car. The EU Directive 96/27/EC on side impact protection has adopted the EEVC Side Impact Test Procedure, including the original performance specification for the barrier face when impacting a flat dynamometric rigid wall. The requirements of the deformable barrier face, as laid down in the Directive, are related to geometrical characteristics, deformation characteristics and energy dissipation figures. Due to these limited requirements, many variations are possible in designing a deformable barrier face. As a result, several barrier face designs are in the market. However, research institutes and car manufacturers report significant difference in test results when using these different devices. It appears that the present approval test is not able to distinguish between the different designs that may perform differently when they impact real vehicles. Therefore, EEVC Working Group 13 has developed a number of tests to evaluate the different designs. In these tests the barrier faces are loaded and deformed in a specific and/or more representative way. Barrier faces of different design have been evaluated. In the paper the set-up and the reasoning behind the tests is presented. Results showing specific differences in performance are demonstrated.