91 Fahrzeugkonstruktion
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (164) (entfernen)
Schlagworte
- Conference (100)
- Konferenz (97)
- Germany (53)
- Deutschland (52)
- Accident (48)
- Unfall (48)
- Safety (44)
- Sicherheit (44)
- Fahrzeug (38)
- Vehicle (36)
- Simulation (34)
- Anfahrversuch (33)
- Bewertung (33)
- Evaluation (assessment) (33)
- Active safety system (31)
- Aktives Sicherheitssystem (30)
- Fußgänger (30)
- Passives Sicherheitssystem (30)
- Pedestrian (30)
- Impact test (veh) (28)
- Test method (27)
- Collision (26)
- Fahrerassistenzsystem (26)
- Injury (26)
- Passive safety system (26)
- Prüfverfahren (26)
- Verletzung (26)
- Schweregrad (Unfall, Verletzung) (25)
- Unfallrekonstruktion (25)
- Severity (accid, injury) (24)
- Analyse (math) (23)
- Car (23)
- Zusammenstoß (23)
- Analysis (math) (22)
- Driver assistance system (22)
- Accident prevention (21)
- Leistungsfähigkeit (allg) (20)
- Unfallverhütung (20)
- Frontalzusammenstoß (19)
- Verletzung) (19)
- injury) (19)
- Efficiency (18)
- Head on collision (18)
- Schweregrad (Unfall (18)
- Severity (accid (18)
- Anthropometric dummy (17)
- Reconstruction (accid) (17)
- Versuch (17)
- Datenbank (16)
- Dummy (16)
- Test (16)
- Driver (14)
- Pkw (14)
- Europa (13)
- Europe (13)
- Fahrer (13)
- Radfahrer (13)
- Child (12)
- Data bank (12)
- Insasse (12)
- Kind (12)
- Statistics (12)
- Cyclist (11)
- On the spot accident investigation (11)
- Prevention (11)
- Statistik (11)
- Antikollisionssystem (10)
- Biomechanics (10)
- Biomechanik (10)
- Collision avoidance system (10)
- Improvement (10)
- Vehicle occupant (10)
- Verbesserung (10)
- Autonomes Fahren (9)
- Autonomous driving (9)
- Development (9)
- Entwicklung (9)
- Forschungsarbeit (9)
- Research project (9)
- Seitlicher Zusammenstoß (9)
- Untersuchung am Unfallort (9)
- Vehicle regulations (9)
- Accident reconstruction (8)
- Auffahrunfall (8)
- Automatisch (8)
- International (8)
- Kompatibilität (8)
- Lorry (8)
- Method (8)
- Side impact (8)
- Standardisierung (8)
- Technische Vorschriften (Kraftfahrzeug) (8)
- Verfahren (8)
- Wirtschaftlichkeitsrechnung (8)
- Automatic (7)
- Compatibility (7)
- Cost benefit analysis (7)
- Datenerfassung (7)
- Fahrzeugsitz (7)
- Fehler (7)
- Geschwindigkeit (7)
- Head (7)
- Kopf (7)
- PKW (7)
- Rear end collision (7)
- Risiko (7)
- Sicherheitsgurt (7)
- Speed (7)
- Verhütung (7)
- Verminderung (7)
- Alte Leute (6)
- Bemessung (6)
- Benutzung (6)
- Braking (6)
- Bremsung (6)
- Cause (6)
- Data acquisition (6)
- Decrease (6)
- Deformation (6)
- Design (overall design) (6)
- Error (6)
- Fahrstabilität (6)
- Fatality (6)
- Interior (veh) (6)
- Knee (human) (6)
- Lkw (6)
- Mathematical model (6)
- Motorrad (6)
- Official approval (6)
- Rechenmodell (6)
- Risk (6)
- Road user (6)
- Safety belt (6)
- Seat (veh) (6)
- Standardization (6)
- Tödlicher Unfall (6)
- Ursache (6)
- Use (6)
- Vehicle handling (6)
- Verkehrsteilnehmer (6)
- Überschlagen (6)
- Airbag (5)
- Aufprallschlitten (5)
- Body (car) (5)
- Brustkorb (5)
- Deformierbare Barriere (Anpralltest) (5)
- EU (5)
- Fahrzeuginnenraum (5)
- Gesetzgebung (5)
- Impact sled (5)
- Impact test (5)
- Interview (5)
- Karosserie (5)
- Legislation (5)
- Motorcycle (5)
- Old people (5)
- Policy (5)
- Politik (5)
- Prognose (5)
- Sensor (5)
- Technologie (5)
- Technology (5)
- Thorax (5)
- Verformung (5)
- Behaviour (4)
- Bremse (4)
- Cervical vertebrae (4)
- Database (4)
- Detection (4)
- Digital model (4)
- Driver information (4)
- Electronic stability program (4)
- Fahrzeugführung (4)
- Halswirbel (4)
- Japan (4)
- Knie (menschl) (4)
- Modification (4)
- Motorcyclist (4)
- Motorradfahrer (4)
- Numerisches Modell (4)
- Overturning (veh) (4)
- Reproducibility (4)
- Reproduzierbarkeit (4)
- Verhalten (4)
- Accident rate (3)
- Advanced driver assistance system (3)
- Air bag (restraint system) (3)
- Attitude (psychol) (3)
- Ausrüstung (3)
- Autonomes Fahrzeug (3)
- Autonomous vehicle (3)
- Baumusterzulassung (3)
- Bein (menschl) (3)
- Belastung (3)
- Berechnung (3)
- Brake (3)
- Bus (3)
- Correlation (math, stat) (3)
- Crashtest (3)
- Damage (3)
- Deformable barrier (impact test) (3)
- Delivery vehicle (3)
- Detektion (3)
- Driver training (3)
- Driving (veh) (3)
- Einstellung (psychol) (3)
- Electric vehicle (3)
- Elektrofahrzeug (3)
- Elektronisches Stabilitätsprogramm (3)
- Equipment (3)
- Fahranfänger (3)
- Fahrausbildung (3)
- Forecast (3)
- Front (3)
- Gewicht (3)
- Head restraint (3)
- Human body (3)
- Impact study (3)
- Intelligent transport system (3)
- Knotenpunkt (3)
- Kopfstütze (3)
- Korrelation (math, stat) (3)
- Leg (human) (3)
- Lenken (Fahrzeug) (3)
- Load (3)
- Menschlicher Körper (3)
- Recently qualified driver (3)
- Sachschaden (3)
- Sichtbarkeit (3)
- Steering (process) (3)
- Steifigkeit (3)
- Stiffness (3)
- Straßenverkehr (3)
- Traffic (3)
- USA (3)
- Unfallhäufigkeit (3)
- United Kingdom (3)
- Unterfahrschutz (3)
- Vereinigtes Königreich (3)
- Verkehr (3)
- Veränderung (3)
- Sichtbarkeit (3)
- Warning (3)
- Warnung (3)
- Weight (3)
- Abdomen (2)
- Active safety (2)
- Adolescent (2)
- Age (2)
- Aktive Sicherheit (2)
- Alter (2)
- Anti locking device (2)
- Antiblockiereinrichtung (2)
- Arbeitsgruppe (2)
- Automatische Notbremsung (2)
- Autonomous emergency braking (2)
- Bicyclist (2)
- Bremsweg (2)
- Calculation (2)
- Classification (2)
- Coach (2)
- Data security (2)
- Datensicherheit (2)
- Dynamics (2)
- Dynamik (2)
- Effectiveness (2)
- Electronic driving aid (2)
- Elektronische Fahrhilfe (2)
- Empfindlichkeit (2)
- Entdeckung (2)
- Erste Hilfe (2)
- Estimation (2)
- Fahrdatenschreiber (2)
- Fahrerinformation (2)
- Feuer (2)
- Fire (2)
- First aid (2)
- Form (2)
- France (2)
- Frankreich (2)
- Frau (2)
- Headlamp (2)
- Highway traffic (2)
- Hinten (2)
- Individueller Verkehr (2)
- Information (2)
- Intelligentes Transportsystem (2)
- Intersection (2)
- Jugendlicher (2)
- Kamera (2)
- Klassifizierung (2)
- Knie (2)
- Kontrolle (2)
- Kraftfahrzeug (2)
- LKW (2)
- Landstraße (2)
- Lieferfahrzeug (2)
- Location (2)
- Measurement (2)
- Messung (2)
- Nacht (2)
- Night (2)
- Norm (tech) (2)
- Occupant (veh) (2)
- Ort (Position) (2)
- Passenger (2)
- Perception (2)
- Post crash (2)
- Private transport (2)
- Prototyp (2)
- Prototype (2)
- Rear (2)
- Regression analysis (2)
- Regressionsanalyse (2)
- Reifen (2)
- Reisebus (2)
- Restraint system (2)
- Richtlinien (2)
- Risikobewertung (2)
- Risk assessment (2)
- Road network (2)
- Rural road (2)
- Sample (mater) (2)
- Scheinwerfer (2)
- Schutz (2)
- Schweden (2)
- Seite (2)
- Sensitivity (2)
- Side (2)
- Spain (2)
- Spanien (2)
- Specification (standard) (2)
- Specifications (2)
- Spinal column (2)
- Straßennetz (2)
- Surveillance (2)
- Technische Vorschriften (2)
- Tyre (2)
- Underride protection (2)
- Unfallverhuetung (2)
- Unterleib (2)
- Untersuchung am unfallort (2)
- Vorn (2)
- Wahrnehmung (2)
- Windschutzscheibe (2)
- Wirbelsäule (2)
- Wirksamkeitsuntersuchung (2)
- Working group (2)
- Zulassung (tech) (2)
- Zusammenstoss (2)
- Ablenkung (psychol) (1)
- Abstandsregeltempomat (1)
- Accident data (1)
- Accompanied driving (1)
- Accuracy (1)
- Active safety system; Automatic; Brake; Car; Collision avoidance system; Conference; Driver assistance system; Germany; Impact test (veh); Rear end collision; Severity (accid (1)
- Activity report (1)
- Adaptive cruise control (1)
- Administration (1)
- Adult (1)
- Advanced vehicle control systems (1)
- Aged people (1)
- Airbag (restraint system) (1)
- Angle (1)
- Antikollisisonssystem (1)
- Apparatus (measurement) (1)
- Atives Sicherheitssystem (1)
- Attention (1)
- Aufmerksamkeit (1)
- Aufzeichung (1)
- Austria (1)
- Autobahn (1)
- Battery (1)
- Bau (1)
- Befreiung (Bergung) (1)
- Begleitetes Fahren (1)
- Benefit cost analysis (1)
- Bewehrung (1)
- Bicycle (1)
- Bildschirm (1)
- Blickfeld (1)
- Blind spot (veh) (1)
- Braking distance (1)
- Bruch (mech) (1)
- Budget (1)
- Calibration (1)
- Camera (1)
- Chassis (1)
- Clothing (1)
- Collision test (veh) (1)
- Comfort (1)
- Communication (1)
- Compatiblity (1)
- Components of the vehicle (1)
- Compression (1)
- Computation (1)
- Construction (1)
- Contact (tyre (1)
- Cooperative intelligent transport system (1)
- Crash Test (1)
- Crash helmet (1)
- Crash test (1)
- Cross roads (1)
- Crossing the road (pedestrian) (1)
- Customer (1)
- Damping (1)
- Data collection (1)
- Data processing (1)
- Data transmission (1)
- Datenverarbeitung (1)
- Datenübertragung (telekom) (1)
- Dauer (1)
- Dauerhaftigkeit (1)
- Daylight (1)
- Deformable barrier (Impact test) (1)
- Deformable barrier system (impact test) (1)
- Dehnungsmessstreifen (1)
- Demand (econ) (1)
- Demographie (1)
- Deutschland ; Konferenz (1)
- Diesel engine (1)
- Dieselmotor (1)
- Digital computer (1)
- Digitalrechner (1)
- Displacement (1)
- Distraction (1)
- Driver experience (1)
- Driving (1)
- Driving aid (electronic) (1)
- Dtetection (1)
- Durability (1)
- Dynamo (1)
- Dämpfung (1)
- EU directive (1)
- EU-Richtlinie (1)
- Echtzeit (1)
- Education (1)
- Eichung (1)
- Eigenschaft (1)
- Eins (1)
- Ejection (1)
- Electric bicycle (1)
- Elektrofahrrad (1)
- Elektronisches Stabilitätsprogram (1)
- Emission control (1)
- Emissionskontrolle (1)
- Engine capacity (1)
- Environment protection (1)
- Ergonomics (1)
- Erwachsener (1)
- Erziehung (1)
- Eu (1)
- European New Car Assessment Programme (1)
- European Union (1)
- Event data recorder (Road vehicle) (1)
- Event data recorder (road vehicle) (1)
- Extrication (1)
- Fahrbahnüberquerung (1)
- Fahrer ; Fahrerassistenzsystem (1)
- Fahrerinformationen (1)
- Fahrleistung (1)
- Fahrrad (1)
- Fahrsimulator (1)
- Fahrstreifen (1)
- Fahrstreifenwechsel (1)
- Fahrwerk (1)
- Fahrzeugbeleuchtung (1)
- Fahrzeugdach (1)
- Fahrzeugflotte (1)
- Fahrzeugteil (Sicherheit) (1)
- Fahrzeugteile (1)
- Failure (1)
- Field of vision (1)
- Finite element method (1)
- Fleet of vehicles (1)
- Future transport mode (1)
- Geometry (shape) (1)
- Gesetzesdurchführung (1)
- Gestaltung (1)
- Government (national) (1)
- Grenzwert (1)
- Harmonisation (1)
- Harmonisierung (1)
- Harmonization (1)
- Hazard (1)
- Head (human) (1)
- Height (1)
- Herausschleudern (1)
- Highway (1)
- Homogeneity (1)
- Homogenität (1)
- Hubraum (1)
- Human machine interface (1)
- Höhe (1)
- Hüfte (menschl) (1)
- In Bewegung (1)
- Inertia reel safety belt (1)
- Information documentation (1)
- Information management (1)
- Injury) (1)
- Installation (1)
- Intelligentes Verkehrssystem (1)
- Interactive model (1)
- Interaktives Modell (1)
- Itinerary (1)
- Junction (1)
- Kleidung (1)
- Kleintransporter (1)
- Komfort (1)
- Kommunikation (1)
- Kompatiblität (1)
- Kontakt Reifen Straße (1)
- Kooperatives System (ITS) (1)
- Kopf (menschl) (1)
- Kreuzung (1)
- Kunde (1)
- Kunststoff (1)
- Lane changing (1)
- Lap strap (1)
- Lateral collision (1)
- Law enforcement (1)
- Layout (1)
- Leistungsfähigkeit (Allg.) (1)
- Leuchtdichte (1)
- Limit (1)
- Luminance (1)
- Market (1)
- Markt (1)
- Massenunfall (1)
- Matrix (1)
- Mensch Maschine Schnittstelle (1)
- Mensch Maschine Verhältnis (1)
- Messgerät (1)
- Methode der finiten Elemente (1)
- Mobility (1)
- Mobilität (1)
- Model (not math) (1)
- Modell (1)
- Montage (1)
- Moped (1)
- Motorway (1)
- Moving (1)
- Multiple collision (1)
- Nachfrage (1)
- Nachhaltigkeit (1)
- Nasse Straße (1)
- Naturalistic Driving (1)
- Naturalistic driving (1)
- Nigeria (1)
- On the scene accident investigation (1)
- One (1)
- Organisation (1)
- Organization (1)
- Output (1)
- Overlapping (1)
- Overturning (1)
- Passive restraint system (1)
- Pelvis (1)
- Pfahl (1)
- Pile (1)
- Plastic material (1)
- Police (1)
- Polizei (1)
- Population (1)
- Portugal (1)
- Probability (1)
- Probe (1)
- Properties (1)
- Prüefverfahren (1)
- Prüfkörper (1)
- Public transport (1)
- Quality (1)
- Quality assurance (1)
- Qualität (1)
- Qualitätssicherung (1)
- Radar (1)
- Radio (1)
- Reaction (human) (1)
- Reaktionsverhalten (1)
- Real time (1)
- Rear view mirror (1)
- Recording (1)
- Reduction (decrease) (1)
- Reflectorized material (1)
- Reflexstoffe (1)
- Regierung (staat) (1)
- Reifenprofil (1)
- Reinforcement (in mater) (1)
- Reiseweg (1)
- Rippe (menschl) (1)
- Road (1)
- Road traffic (1)
- Robot (1)
- Roboter (1)
- Roll over (veh) (1)
- Roof (veh) (1)
- Rotation (1)
- Route guidance (1)
- Rundfunk (1)
- Rückspiegel (1)
- Safety harness (1)
- Safety system (1)
- Schlag (1)
- Schleudertrauma (1)
- Schulter (1)
- Schutzhelm (1)
- Schweregrad /Unfall (1)
- Seat (1)
- Seat belt (1)
- Seat harness (1)
- Severity (accid, injuy) (1)
- Shape (1)
- Shock (1)
- Shoulder (human) (1)
- Simulator (driving) (1)
- Social factors (1)
- Soziale Faktoren (1)
- Stadardization (1)
- Stadt (1)
- Stand der Technik (Bericht) (1)
- State of the art report (1)
- Stochastic process (1)
- Stochastischer Prozess (1)
- Stopping distance (1)
- Strain gauge (1)
- Straße (1)
- Sustainability (1)
- Sweden (1)
- Tageslicht (1)
- Teenage driver (1)
- Telecommunication (1)
- Telefon (1)
- Telekommunikation (1)
- Telephone (1)
- Tension (1)
- Tests (1)
- Time (1)
- Toter Winkel (1)
- Toxicity (1)
- Toxizität (1)
- Traffic control (1)
- Traffic lanes (1)
- Train (1)
- Transport infrastructure (1)
- Tunnel (1)
- Typenzulassung (1)
- Tyre tread (1)
- Tätigkeitsbericht (1)
- Umweltschutz (1)
- Underride prevention (1)
- Unfalldaten (1)
- Unfallfolgemaßnahme (1)
- Unfallfolgephase (1)
- Unfallverhütug (1)
- United kingdom (1)
- Untersuchung am Umfallort (1)
- Urban area (1)
- Usa (1)
- Vehicle Regulations (1)
- Vehicle lighting (1)
- Vehicle mile (1)
- Vehicle safety (1)
- Vehicle safety device (1)
- Veraenderung (1)
- Vereinigtes Königreichl (1)
- Verkehrsinfrastruktur (1)
- Verkehrssteuerung (1)
- Vermeidung (1)
- Verschiebung (1)
- Versuchspuppe (1)
- Verwaltung (1)
- Video camera (1)
- Visual display (1)
- Vorne (1)
- Wahrscheinlichkeit (1)
- Wet road (1)
- Whiplash injury (1)
- Window (veh) (1)
- Windscreen (veh) (1)
- Winkel (1)
- Wirkungsanalyse (1)
- Woman (1)
- Women (1)
- Zeit (1)
- Zielführungssystem (1)
- Zug (Eisenbahn) (1)
- Zug (mech) (1)
- Zukünftiges Verkehrsmittel (1)
- Zusammendrückung (1)
- ZusammenstoÃüï-¿-½Ãƒ-¯Ã‚-¿Ã‚-½ (1)
- efficiency (1)
- head (1)
- road) (1)
- Öffentlicher Verkehr (1)
- Österreich (1)
- Überdeckung (1)
Institut
In the last years there has been a decline in accident figures in Germany especially for four wheeled vehicles. At the same time, accident figures for motorcycles remained nearly constant. About 17 % of road traffic fatalities in the year 2006 were motorcyclists. 33 % of these riders were killed in single vehicle crashes. This leads to the conclusion that improving driving dynamics and driving stability of powered two wheelers would yield considerable safety gains. However, the well-known measures for cars and trucks with their proven effectiveness cannot be transferred easily to motorcycles. Therefore studies were carried out to examine the safety potential of Anti Lock Braking Systems (ABS) and Vehicle Stability Control (VSC) for motorcycles by means of accident analysis, driving tests and economical as well as technical assessment of the systems. With regard to ABS, test persons were assigned braking tasks (straight and in-curve) with five different brake systems with and without ABS. Stopping distances as well as stress and strain on the riders were measured for 9 test riders who completed 105 braking manoeuvres each. Knowing the ability of ABS to avoid falls during braking in advance of a crash and taking into account the system costs, a cost benefit analysis for ABS for motorcycles was carried out for different market penetration of ABS, i.e. equipment rates, and different time horizons. The potential of VSC for motorcycles was estimated in two steps. First the kinds of accidents that could be prevented by such a system at all have been analysed. For these accident configurations, simulations and driving tests were then performed to determine if a VSC was able to detect the critical driving situation and if it was technically possible to implement an actuator which would help to stabilise the critical situation.
There is a need for detecting characteristics of pedestrian movement before car-pedestrian collisions to trigger a fully reversible pedestrian protection system. For this purpose, a pedestrian sensor system has been developed. In order to evaluate the effectiveness of the sensor system, the in-depth knowledge of car-pedestrian impact scenarios is needed. This study aims at the evaluation of the sensor system. The accident data are selected from the STRADA database. The accident scenarios available in this database were evaluated and the knowledge of the most common scenarios was developed in terms of the pedestrian trajectory, the pedestrian speed, the car trajectory, the car velocity, etc. A mathematical model was then established to evaluate the sensor system with different detective angles. It was found that in order to detect all the pedestrians in the most common scenarios on time the sensor detective angle must be kept larger than 60 degrees.
The overall purpose of the ASSESS project is to develop a relevant and standardised set of test and assessment methods and associated tools for integrated vehicle safety systems, primarily focussing on currently available pre-crash sensing systems. The first stage of the project was to define casualty relevant accident scenarios so that the test scenarios will be developed based on accident scenarios which currently result in the greatest injury outcome, measured by a combination of casualty severity and casualty frequency. The first analysis stage was completed using data from a range of accident databases, including those which were nationally representative (STATS19, UK and STRADA, SE) and in-depth sources which provided more detailed parameters to characterise the accident scenarios (GIDAS, DE and OTS, UK). A common analysis method was developed in order to compare the data from these different sources, and while the data sets were not completely compatible, the majority of the data was aligned in such a way that allowed a useful comparison to be made. As the ASSESS project focuses on pre-crash sensing systems fitted to passenger cars, the data selected for the analysis was "injury accidents which involved at least one passenger car". The accident data analysis yielded the following ranked list of most relevant accident scenarios: Rank Accident scenario 1 Driving accident - single vehicle loss of control 2 Accidents in longitudinal traffic (same and opposite directions) 3 Accidents with turning vehicle(s) or crossing paths in junctions 4 Accidents involving pedestrians The ranked list highlights the relatively large role played by "accidents in longitudinal traffic", and "accidents with turning vehicle(s) or crossing paths in junctions" (the second and third most prevalent accident scenarios, respectively). The pre-crash systems addressed in ASSESS propose to yield beneficial safety outcomes with specific regard to these accident scenarios. This indicates that the ASSESS project is highly relevant to the current casualty crash problem. In the second stage of the analysis a selection of these accident scenarios were analysed further to define the accident parameters at a more detailed level .This paper describes the analysis approach and results from the first analysis stage.
This study investigates the protection offered by passive head-restraints with different stiffness and energy dissipation properties. For this purpose, computational multi-body models of a generic car seat and a biofidelic 50thpercentile male human for rear impact are used to study different seat designs and passive head-restraints. The validated seat-occupant model is also used in the design of two different car-seat models which are shown to effectively mitigate whiplash by utilising a crash-energy distribution technique. Five different passive head-restraints with varying stiffness (low-medium-high) and energy dissipation percentages (low-high) are successively attached to four different car-seat models. The simulation results indicate that the protection offered by head restraints is strongly dependent on the seat design. It has also been shown that the stiffness of the passive head-restraint has much more influence on whiplash-risk in comparison to its energy dissipation capacity.
Thoracic injuries are one of the main causes of fatally and severely injured casualties in car crashes. Advances in restraint system technology and airbags may be needed to address this problem; however, the crash test dummies available today for studying these injuries have limitations that prevent them from being able to demonstrate the benefits of such innovations. THORAX-FP7 was a collaborative medium scale project under the European Seventh Framework. It focused on the mitigation and prevention of thoracic injuries through an improved understanding of the thoracic injury mechanisms and the implementation of this understanding in an updated design for the thorax-shoulder complex of the THOR dummy. The updated dummy should enable the design and evaluation of advanced restraint systems for a wide variety (gender, age and size) of car occupants. The hardware development involved five steps: 1) Identification of the dominant thoracic injury types from field data, 2) Specification of biomechanical requirements, 3) Identification of injury parameters and necessary instrumentation, 4) Dummy hardware development and 5) Evaluation of the demonstrator dummy. The activities resulted in the definition of new biofidelity and instrumentation requirements for an updated thorax-shoulder complex. Prototype versions were realised and implemented in three THOR dummies for biomechanical evaluation testing. This paper documents the hardware developments and biomechanical evaluation testing carried out.
Advancing active safety towards the protection of vulnerable road users: the PROSPECT project
(2017)
Accidents involving Vulnerable Road Users (VRU) are still a very significant issue for road safety. According to the World Health Organisation, pedestrian and cyclist deaths account for more than 25% of all road traffic deaths worldwide. Autonomous Emergency Braking Systems have the potential to improve safety for these VRU groups. The PROSPECT project (Proactive Safety for Pedestrians and Cyclists) aims to significantly improve the effectiveness of active VRU safety systems compared to those currently on the market by expanding the scope of scenarios addressed by the systems and improving the overall system performance. The project pursues an integrated approach: Newest available accident data combined with naturalistic observations and HMI guidelines represent key inputs for the system specifications, which form the basis for the system development. For system development, two main aspects are considered: advanced sensor processing with situation analysis, and intervention strategies including braking and steering. All these concepts are implemented in several vehicle prototypes. Special emphasis is put on balancing system performance in critical scenarios and avoiding undesired system activations. For system validation, testing in realistic scenarios will be done. Results will allow the performance assessment of the developed concepts and a cost-benefit analysis. The findings within the PROSPECT project will contribute to the generation of state -of-the-art knowledge, technical innovations, assessment methodologies and tools for advancing Advanced Driver Assistance Systems towards the protection of VRUs. The introduction of a new generation safety system in the market will enhance VRU road safety in 2020-2025, contributing to the "Vision Zero" objective of no fatalities or serious injuries in road traffic set out in the Transport White Paper. Furthermore, the test methodologies and tools developed within the project shall be considered for the New Car Assessment Programme (Euro NCAP) future roadmaps, supporting the European Commission goal of halving the road toll in the 2011-2020 timeframe.
For more than a decade, ADAC accident researchers have analysed road accidents with severe injuries, recording some 20,000 accidents. An important task in accident research is to determine the causative factors of road accidents. Apart from vehicle engineering and human factors, accident research also focuses on infrastructural and environmental aspects. To find out what accident scenarios are the most common in ADAC accident research and what driver assistance systems can prevent them, our first task was to conduct a detailed accident analysis. Using CarMaker, we performed a realistic simulation of accident scenarios, including crashes, with varying parameters. To begin with, we made an initial selection of driver assistance systems in order to determine those with the greatest accident prevention potential. One important finding of this study is that the safety potential of the individual driver assistance systems can actually be examined. It also turned out that active safety offers even much more potential for development and innovation than passive safety. At the same time, testing becomes more demanding, too, as new systems keep entering the market, many of them differing in functional details. ADAC will continue to test all driver assistance systems as realistically as possible so as to be able to provide advice to car buyers. Therefore, it will be essential to develop and improve test conditions and criteria.
Since 2005 the German In-Depth Accident Study (GIDAS) also records aspects of active vehicle safety. This is done because vehicles are fitted with an increasing number of active safety devices which have undoubtedly an influence on the number, severity and course of accidents. Accident researchers expect that collecting active safety data will facilitate to assess and quantify the impact of these and future devices. It is the aim of this paper to outline benefits and limitations associated with the recording of active safety aspects within indepth studies. An overview about possible areas where active safety data can be useful will be given. For that purpose single safety or comfort systems will be selected to estimate the effects of an accident database which includes variables associated with these systems. Questions with regard to the limitations of collecting active safety data will be addressed. Possible items are for example the usability of the data recorded, the real accident cause, the small number of relevant accidents, the time span needed to gather a sufficient dataset, the small share of vehicles equipped with a certain system or different functionalities of systems that are supposed to fall in the same category. As a result user needs for a reasonable data collection of active safety elements will be elaborated.
The development of tyre- and truck-manufacturers leads to the direction to introduce wide base single tyres (size 495/45R22,5) instead of twin tyres on the driving axle of trucks, tractors and busses. To study the driving behaviour and safety of various trucks and units with different tyre combinations and loading conditions was the aim of the study. A computer-aided simulation was used for this investigation. Drive tests with a 40 t unit with prototype single tyres on the drive axle were carried out to verify the simulation. Alterations in driving behaviour and driving safety are mainly dependent on the tyre cornering stiffness. The prototype wide single tyres had a higher lateral stiffness which leads to a higher degree of under-steering (safer driving behaviour). The altered spring base on the drive axle had no influence on the side- tilt stability of vehicle combinations but the solo truck profited from the higher rear axle roll stiffness (less danger for roll-over accidents). As far as the driving safety is concerned nothing speaks against wide base tyres on the drive axle. The simulation of a tyre defect in a bend (assuming 40% of the max. transferable side force for the flat tyre) showed no increased danger using wide single tyres. Later driving tests showed however the need of tyre run flat possibilities to avoid jack-knifing of road trains. Also tyre pressure monitoring systems and electronic stability programs for the trucks are advised.
Accident research 2.0: New methods for representative evaluation of integral safety in traffic
(2013)
BMW has developed a procedure for rating Advanced Driver Assistance Systems (ADAS) benefits that integrates two distinct tools. The tool "S.A.F.E.R." is designed to analyze the pre-crash phase. The aim of S.A.F.E.R. is to simulate all relevant processes in sufficient detail to obtain reproducible estimates of key indicators (effectiveness, false positives, etc.). The relevant processes include not only traffic and vehicle dynamics, but also environmental and most importantly human factors. Representative distributions of factors and parameters are obtained by taking the stochastic variation of all relevant parameters into account in the simulations. The second tool, known as "ICOS", has been designed to provide a high-resolution, high-fidelity description of crash phase dynamics. If one converts the outputs of stochastic simulation into inputs for crash dynamics, the result is a comprehensive description of exactly how a safety system can reduce injuries. Applications currently focus on high-fidelity simulation of individual crashes in order to enhance our understanding and optimization of connected safety systems. An integrated simulation process thus allows an exact prediction of the effectiveness in individual cases in terms of injury severity. The development and rating of integral safety need to reflect the true efficiency in the field. The integrated approach described here could provide a valid and reproducible basis for rating connected systems of active and passive safety. In particular, "virtual experiments" using a traffic-based approach and incorporating models of all relevant processes constitute an essential element of the approach.
Nigeria ranks one of the highest countries in the world with the largest accident, especially when measured by whiplash associated disorders, whereas, traffic safety education rate, data and information been widely known as preventive indicators have been grossly neglected. In Nigeria, traffic safety enlightenment, awareness, political understanding and appreciation of the problem's magnitude are lacking. This study, therefore, seeks to understand and document the fact that accident causation factors in Nigeria relate more to the problem of development, poverty, knowledge and education as evidenced in most other developing countries. Among the primary accident causation factors on Nigerian roads are: - lack of a transportation system or multi-model integration - sub-standard and obsolete vehicles and road furniture - poor road maintenance, investment and engineering management - paucity of road users' and drivers' knowledge, skill, enlightenment and education of the road Use This paper submits that Nigeria being a developing nation requires purely primitive strategies being cost effective (health wise) than curative measures. It is in this light that an enduring, comprehensive and sustainable traffic safety educational programmes information base and data inventory, analysis and implementations form the focus of this study. This effort will provide basic guidelines framework and implementation procedure for a successful prevention of whiplash associated disorder resulting from road traffic crashes in Nigeria and other parts of the world.
The European CASPER (Child Advanced Safety Project for European Roads) project studying car child safety includes a sociological approach in order to have a better understanding of the behaviour of parents driving children under 12 years old. A questionnaire was distributed via the internet in Europe with 998 parents (representing 1638 children) from 22 European countries responding. The results inform on the way parents secure their children during a car trip. Many parents did not control how their children were installed in the child restraint system (CRS). A toddler was more likely to travel into a child seat than an older child was. Regarding misuse situations, an important part of the participants did not think that they could make mistakes when fixing the child seat to the car (26%) or when placing the child into the seat (39%). This leaves an important field of action especially by communication via different media and in the CRS sale outlets.
Vehicle crash research at different levels is currently being conducted by several investigation groups in Spain, in some instances within various EU-funded projects. However there is a clear opportunity for increasing compatibility and maximizing usefulness, both at national and European levels, of the information collected by these groups. After reviewing on-going activities and programs in different countries, a framework for a nationwide crash investigation project is proposed: an organizational scheme is suggested as part of a future National Road Safety Strategic Plan; a map of investigation teams located in technological centres, universities and police agencies in Spain is presented; alternatives for several practical aspects such as team composition, deployment and operational budgets and project developmental stages are also discussed.
One main objective of the EU-Project SENIORS is to provide improved methods to assess thoracic injury risk to elderly occupants. In contribution to this task paired simulations with a THOR dummy model and human body model will be used to develop improved thoracic injury risk functions. The simulation results can provide data for injury criteria development in chest loading conditions that are underrepresented in PMHS test data sets that currently proposed risk functions are based on. To support this approach a new simplified generic but representative sled test fixture and CAE model for testing and simulation were developed. The parameter definition and evaluation of this sled test fixture and model is presented in this paper. The justification and definition of requirements for this test set-up was based on experience from earlier studies. Simple test fixtures like the gold standard sled fixture are easy to build and also to model in CAE, but provide too severe belt-only loading. On the other hand a vehicle buck including production components like airbag and seat is more representative, but difficult to model and to be replicated at a different laboratory. Furthermore some components might not be available for physical tests at later stage. The basis of the SENIORS generic sled test set-up is the gold standard fixture with a cable seat back and foot rest. No knee restraint was used. The seat pan design was modified including a seat ramp. The three-point belt system had a generic adjustable load limiter. A pre-inflated driver airbag assembly was developed for the test fixture. Results of THOR test and simulations in different configurations will be presented. The configurations include different deceleration pulses. Further parameter variations are related to the restraint system including belt geometry and load limiter levels. Additionally different settings of the generic airbag were evaluated. The test set-up was evaluated and optimized in tests with the THOR-M dummy in different test configurations. Belt restraint parameters like D-ring position and load limiter setting were modified to provide moderate chest loading to the occupant. This resulted in dummy readings more representative of the loading in a contemporary vehicle than most available PMHS sled tests reported in the literature. However, to achieve a loading configuration that exposes the occupant to even less severe loading comparable to modern vehicle restraints it might be necessary to further modify the test set-up. The new generic sled test set-up and a corresponding CAE model were developed and applied in tests and simulations with THOR. Within the SENIORS project with this test set-up also volunteer and PMHS as well as HBM simulations are performed, which will be reported in other publications. The test environment can contribute in future studies to the assessment of existing and new frontal impact dummies as well as dummy improvements and related instrumentation. The test set-up and model could also serve as a new standard test environment for PMHS and volunteer tests as well as HBM simulations.
Description of road traffic related knee injuries in published investigations is very heterogeneous. The purpose of this study was to estimate the risk of knee injuries in real world car impacts in Germany focusing vulnerable road users (pedestrians, bicyclists and motorcyclists) and restrained car drivers. The accident research unit analyses technical and medical data collected shortly after the accident at scene. Two different periods (years 1985-1993 and 1995-2003) were compared focusing on knee injuries (Abbreviated Injury Scale (AISKnee) 2/3). In order to determine the influences type of collision, direction and speed as well as the injury pattern and different injury scores (AIS, MAIS, ISS) were examined. 1.794 pedestrians, 742 motorcyclists, 2.728 bicyclists and 1.116 car drivers were extracted. 2% had serious ligamentous or bony injuries in relation to all injured. The risk of injury is higher for twowheelers than for pedestrians, but knee injury severity is higher for the latter group. Overall the current knee injury risk is low and significant reduced comparing both time periods (27%, p<0,0001). Severe injuries (AISKnee 2/3) were below 1%). Improved aerodynamic design of car fronts reduced the risk for severe knee injuries significantly (p=0,0015). Highest risk of injury is for motorcycle followed by pedestrians, respectively. Knee protectors could prevent injuries by reducing local forces. The classically described dashboard injury was rarely identified. The overall injury risk for knee injuries in road traffic is lower than estimated and reduced comparing both periods. The aerodynamic shape of current cars compared to older types reduced the incidence and severity of knee injuries. Further modification and optimization of the interior and exterior design could be a proper measurement. Classic described injury mechanisms were rarely identified. It seems that the AIS is still underestimating extremity injuries and their long term results.
Accidents between right turning trucks and straight driving cyclists often show massive consequences. Accident severity in terms of seriously or fatally injured cyclists that are involved is much higher than in accidents of other traffic participants in other situations. It seems clear that adding additional mirrors will very likely not improve the situation. At ESV 2015, a methodology to derive test procedures and first test cases as well as requirements for a driver assist system to address blind spot accidents has been presented. However, it was unclear if and how testing of these cases is feasible, to what extent characteristics of different truck concepts (e.g. articulated vehicles, rigid vehicles) influence the test conduction and outcome, and what tolerances should be selected for the different variables. This work is important for the acceptance of a draft regulation in the UN working group on general safety. In the meantime, three test series using a single tractor vehicle, a tractor-semitrailer combination and a rigid vehicle have been conducted. The test tools (e.g. surrogate devices) have been refined. A fully crashable, commercially available bicycle dummy has been tested. If used correct, this dummy does follow a straight line quite precisely and it does not cause any damage to the truck under test in case of accidental impact. The dummy specifications are freely available. During testing, the different vehicle categories resulted in different trajectories being driven. Articulated vehicle combinations did first execute a turn into the opposite direction, and on the other hand, single tractor vehicles did behave comparable to passenger cars. A possible solution to take these behaviors into account is to require the vehicles to drive through a corridor that is narrow for a precise straight-driving phase and extends during the turn. Other investigated parameters are the dummy and vehicle speed tolerances. The results from this research make it possible to draft a regulation for a driver assistance system that helps to avoid blind spot accidents: test cases have been refined, their feasibility has been checked, and corridors for the vehicles and for important parameters (e.g. test speeds) have been set. The test procedure is applicable to all types of heavy goods vehicles. In combination with the accidentology (ESV 2015 paper), the work provides the basis for a regulation for such an assistance system.
In 2016 the seventh ESAR conference (Expert Symposium on Accident Research) was held in Hannover. ESAR is an international convention of experts, who analyze traffic accidents all over the world and discuss their results in this context, conducted at the Medizinische Hochschule Hannover every 2 years. It connected representatives of public authorities, engineers in automotive development and scientists and offers a forum with particular emphasis on In-Depth-Analyses of accident statistics and accident analyses. Special focus is placed on research on the basis of so-called "In-Depth-Accident-Investigations" [data collections at the sites of the accidents], which are characterized by extensive documentations of the sites of the accidents, of the vehicles as well as of the injuries, encompassing several scientific fields. ESAR aims at a multi-disciplinary compilation of scientific results and at discussing them on an international, scientific level. It is thus a scientific colloquium and a platform for exchanging information for all accident researchers. Experiences in accident prevention as well as in the complex field of accident reconstruction are stated and new research fields are added. Existing results of long-term research work in Europe, the US, Australia and Japan include different infrastructural correlations and give findings on population, vehicle population and driver characteristics, which offer a basis for recommendations to be derived and measures for increasing road safety.
Der Allgemeine Deutsche Automobil-Club e.V. (ADAC) und die Bundesanstalt für Straßenwesen (BASt) veranstalteten am 15. Oktober 2009 in Baden-Baden ihr 7. Symposium \"Sicher fahren in Europa\". Nach 1991, 1994, 1997, 2000, 2003 und zuletzt 2006 trafen sich auch dieses Mal wieder zahlreiche Fachleute aus Wissenschaft und Politik, Industrie, Wirtschaft und Verbänden aus dem In- und Ausland, trugen neue Forschungsergebnisse vor und erörterten aktuelle Ansätze zur Erhöhung der Verkehrssicherheit. Dabei ging es in den Referaten und Diskussionsbeiträgen und in den vier Workshops vor allem darum, die verkehrspolitischen Entwicklungen und Herausforderungen für die europäische Verkehrssicherheitsarbeit im Hinblick auf folgende Themen zu beleuchten: "Verkehrssicherheit Junger Fahrer", - Das "Auto der Zukunft", - "Demographischer Wandel", - "Landstraßensicherheit". Den Grundsatzreferaten folgten vertiefte Bearbeitungen in den Workshops. Die CD-ROM dokumentiert die Grußworte, Referate und Diskussionsbeiträge.
In 2014 the sixth ESAR conference (Expert Symposium on Accident Research) was held in Hannover. ESAR is an international convention of experts, who analyze traffic accidents all over the world and discuss their results in this context, conducted at the Medizinische Hochschule Hannover every 2 years. It connected representatives of public authorities, engineers in automotive development and scientists and offers a forum with particular emphasis on In-Depth-Analyses of accident statistics and accident analyses. Special focus is placed on research on the basis of so-called "In-Depth-Accident-Investigations" [data collections at the sites of the accidents], which are characterized by extensive documentations of the sites of the accidents, of the vehicles as well as of the injuries, encompassing several scientific fields. ESAR aims at a multi-disciplinary compilation of scientific results and at discussing them on an international, scientific level. It is thus a scientific colloquium and a platform for exchanging information for all accident researchers. Experiences in accident prevention as well as in the complex field of accident reconstruction are stated and new research fields are added. Existing results of long-term research work in Europe, the US, Australia and Japan include different infrastructural correlations and give findings on population, vehicle population and driver characteristics, which offer a basis for recommendations to be derived and measures for increasing road safety.
Der Allgemeine Deutsche Automobil-Club e.V. (ADAC) und die Bundesanstalt für Straßenwesen (BASt) veranstalteten am 13. Oktober 2006 in Baden-Baden das 6. Symposium "Sicher fahren in Europa". Die Fachvorträge befassten sich mit den Themenbereichen: Ansätze zu mehr Verkehrssicherheit, - Verbesserung der Fahrzeugsicherheit, - Besondere Zielgruppen. Die CD-ROM dokumentiert die Grußworte, die Referate und die Podiumsdiskussion.