91 Fahrzeugkonstruktion
Filtern
Erscheinungsjahr
Dokumenttyp
Volltext vorhanden
- nein (133) (entfernen)
Schlagworte
- Sicherheit (58)
- Safety (57)
- Bewertung (40)
- Evaluation (assessment) (40)
- Vehicle (39)
- Fahrzeug (38)
- Anfahrversuch (34)
- Impact test (veh) (31)
- Conference (28)
- Test method (28)
- Versuch (27)
- Konferenz (26)
- Prüfverfahren (26)
- Test (26)
- Accident (22)
- Unfall (22)
- Fußgänger (20)
- Pedestrian (20)
- Anthropometric dummy (19)
- Deutschland (19)
- Germany (19)
- Car (18)
- Dummy (17)
- Collision (16)
- Pkw (16)
- Compatibility (15)
- Kompatibilität (15)
- Simulation (15)
- Driver assistance system (14)
- Method (14)
- Passive safety system (14)
- Passives Sicherheitssystem (14)
- Verfahren (14)
- Zusammenstoß (14)
- Fahrerassistenzsystem (13)
- Frontalzusammenstoß (13)
- Head on collision (13)
- Gesetzgebung (12)
- Legislation (12)
- Research project (12)
- Unfallverhütung (12)
- Accident prevention (11)
- Child (11)
- Forschungsarbeit (11)
- Kind (11)
- Analyse (math) (10)
- Analysis (math) (10)
- EU (10)
- Europa (10)
- Europe (10)
- Injury (10)
- Schlag (10)
- Shock (10)
- Verletzung (10)
- Autonomes Fahren (9)
- Autonomous driving (9)
- Driver (9)
- Driver information (9)
- Fahrer (9)
- Fahrerinformation (9)
- Fahrstabilität (9)
- Insasse (9)
- Lkw (9)
- Lorry (9)
- Radfahrer (9)
- Schweregrad (Unfall, Verletzung) (9)
- Technische Vorschriften (Kraftfahrzeug) (9)
- Vehicle handling (9)
- Vehicle occupant (9)
- Vehicle regulations (9)
- Active safety system (8)
- Aktives Sicherheitssystem (8)
- Automatic (8)
- Automatisch (8)
- Biomechanics (8)
- Biomechanik (8)
- Electronic driving aid (8)
- Elektronische Fahrhilfe (8)
- Improvement (8)
- Measurement (8)
- Messung (8)
- Motorcycle (8)
- Motorrad (8)
- Severity (accid (8)
- Severity (accid, injury) (8)
- Technologie (8)
- Technology (8)
- Verbesserung (8)
- injury) (8)
- Cyclist (7)
- Fahrzeugführung (7)
- Head (7)
- Kopf (7)
- Seitlicher Zusammenstoß (7)
- Side impact (7)
- Standardisierung (7)
- Belastung (6)
- Bemessung (6)
- Braking (6)
- Bremsung (6)
- Design (overall design) (6)
- Driving (veh) (6)
- Impact test (6)
- Load (6)
- Prevention (6)
- Risiko (6)
- Safety belt (6)
- Sicherheitsgurt (6)
- Verletzung) (6)
- Alte Leute (5)
- Anti locking device (5)
- Antiblockiereinrichtung (5)
- Ausrüstung (5)
- Benutzung (5)
- Communication (5)
- Deformation (5)
- Deformierbare Barriere (Anpralltest) (5)
- Development (5)
- Entwicklung (5)
- Equipment (5)
- Ergonomics (5)
- Geschwindigkeit (5)
- Headlamp (5)
- Knee (human) (5)
- Kommunikation (5)
- Lenken (Fahrzeug) (5)
- Official approval (5)
- Reifen (5)
- Richtlinien (5)
- Risk (5)
- Scheinwerfer (5)
- Schweregrad (Unfall (5)
- Specifications (5)
- Speed (5)
- Standardization (5)
- Steering (process) (5)
- Tyre (5)
- Use (5)
- Wirtschaftlichkeitsrechnung (5)
- Accident rate (4)
- Aufprallschlitten (4)
- Bein (menschl) (4)
- Brustkorb (4)
- Collision avoidance system (4)
- Cost benefit analysis (4)
- Datenbank (4)
- Decrease (4)
- Driver training (4)
- Efficiency (4)
- Ergonomie (4)
- Fahrausbildung (4)
- Fahrzeuginnenraum (4)
- Fahrzeugsitz (4)
- Impact sled (4)
- Interior (veh) (4)
- Leg (human) (4)
- Leistungsfähigkeit (allg) (4)
- Nacht (4)
- Night (4)
- Norm (tech) (4)
- Old people (4)
- Perception (4)
- Reproducibility (4)
- Reproduzierbarkeit (4)
- Road user (4)
- Seat (veh) (4)
- Sichtbarkeit (4)
- Specification (standard) (4)
- Thorax (4)
- Unfallhäufigkeit (4)
- Verformung (4)
- Verkehrsteilnehmer (4)
- Verminderung (4)
- Sichtbarkeit (4)
- Wahrnehmung (4)
- Airbag (3)
- Antikollisionssystem (3)
- Auffahrunfall (3)
- Bend (road) (3)
- Bicycle (3)
- Brake (3)
- Bremse (3)
- Bus (3)
- Database (3)
- Deformable barrier (impact test) (3)
- Error (3)
- Fahrleistung (3)
- Fahrrad (3)
- Fehler (3)
- Gewicht (3)
- Human body (3)
- Knie (menschl) (3)
- Kraftfahrzeug (3)
- Leuchtdichte (3)
- Luminance (3)
- Menschlicher Körper (3)
- Messgerät (3)
- Modification (3)
- Motorcyclist (3)
- Motorradfahrer (3)
- Policy (3)
- Politik (3)
- Rear end collision (3)
- Reflectivity (3)
- Reflexionsgrad (3)
- Spikesreifen (3)
- Statistics (3)
- Statistik (3)
- Straßenkurve (3)
- Straßenverkehr (3)
- Studded tyre (3)
- Unterfahrschutz (3)
- Vehicle mile (3)
- Verhütung (3)
- Warning (3)
- Weight (3)
- Windschutzscheibe (3)
- Windscreen (veh) (3)
- Active safety (2)
- Adolescent (2)
- Age (2)
- Air bag (restraint system) (2)
- Aktive Sicherheit (2)
- Alter (2)
- Ankündigung (2)
- Apparatus (measuring) (2)
- Autonomes Fahrzeug (2)
- Autonomous vehicle (2)
- Baumusterzulassung (2)
- Bicyclist (2)
- Blendung (2)
- Body (car) (2)
- Braking distance (2)
- Bremsweg (2)
- Cause (2)
- Classification (2)
- Crash Test (2)
- Data acquisition (2)
- Datenerfassung (2)
- Delivery vehicle (2)
- Detection (2)
- Detektion (2)
- Electric vehicle (2)
- Elektrofahrzeug (2)
- Empfindlichkeit (2)
- Fahranfänger (2)
- Fatality (2)
- Federung (2)
- Forschungsbericht (2)
- France (2)
- Frankreich (2)
- Glare (2)
- Griffigkeit (2)
- Highway traffic (2)
- Impact study (2)
- Individueller Verkehr (2)
- Industrie (2)
- Industry (2)
- International (2)
- Jugendlicher (2)
- Karosserie (2)
- Klassifizierung (2)
- Knie (2)
- Kunststoff (2)
- Landstraße (2)
- Mathematical model (2)
- Nummer (2)
- Plastic material (2)
- Private transport (2)
- Prototyp (2)
- Prototype (2)
- Prüfstand (2)
- Rear view mirror (2)
- Recently qualified driver (2)
- Rechenmodell (2)
- Reconstruction (accid) (2)
- Reflectorized material (2)
- Reflexstoffe (2)
- Road network (2)
- Rural road (2)
- Rückspiegel (2)
- Schutz (2)
- Sensitivity (2)
- Sensor (2)
- Skidding resistance (2)
- Straßennetz (2)
- Straßenverkehrsrecht (2)
- Suspension (veh) (2)
- Test rig (2)
- Traffic count (2)
- Transport (2)
- Tödlicher Unfall (2)
- Underride protection (2)
- Unfallrekonstruktion (2)
- Ursache (2)
- Vehicle inspection (2)
- Verkehrserhebung (2)
- Versuchspuppe (2)
- Veränderung (2)
- Visual display (2)
- Zahl (2)
- Zulassung (tech) (2)
- Zusammenstoss (2)
- Abdomen (1)
- Abstandsregeltempomat (1)
- Acceleration (1)
- Accident data (1)
- Accident proneness (1)
- Accompanied driving (1)
- Adaptive cruise control (1)
- Adult (1)
- Aged people (1)
- Angle (1)
- Anhänger (1)
- Anti blocking device (1)
- Antiblockiersystem (1)
- Antikollisisonssystem (1)
- Apparatus (measurement) (1)
- Attention (1)
- Attitude (psychol) (1)
- Aufmerksamkeit (1)
- Autobahn (1)
- Axle (1)
- Battery (1)
- Bau (1)
- Baustoff (1)
- Begleitetes Fahren (1)
- Begrenzungsleuchten (1)
- Behaviour (1)
- Behinderter (1)
- Benefit cost analysis (1)
- Berechnung (1)
- Beschleunigung (1)
- Betriebsverhalten (1)
- Bibliographie (1)
- Bibliography (1)
- Bildschirm (1)
- Blind spot (veh) (1)
- Bonnet (car) (1)
- Brake light (1)
- Bremslicht (1)
- Bruch (mech) (1)
- Bumper (1)
- Calculation (1)
- Calibration (1)
- Carriageway (1)
- Chassis (1)
- Coefficient of friction (1)
- Colour (1)
- Compatiblity (1)
- Components of the car (1)
- Compression (1)
- Construction (1)
- Contact (tyre road) (1)
- Control (1)
- Cooperative intelligent transport system (1)
- Correlation (math, stat) (1)
- Crash helmet (1)
- Crashtest (1)
- Crossing the road (pedestrian) (1)
- Cycle car (1)
- Data bank (1)
- Data security (1)
- Datensicherheit (1)
- Dauerhaftigkeit (1)
- Daylight (1)
- Daytime running light (1)
- Deceleration (1)
- Decke (Straße) (1)
- Deckschicht (1)
- Deformable barrier (Impact test) (1)
- Deformable barrier system (impact test) (1)
- Dehnungsmessstreifen (1)
- Demand (econ) (1)
- Demographie (1)
- Deutschland ; Konferenz (1)
- Diesel engine (1)
- Dieselmotor (1)
- Digital model (1)
- Dimension (1)
- Disabled person (1)
- Distribution (gen) (1)
- Driver experience (1)
- Driving aptitude (1)
- Durability (1)
- Durchsichtigkeit (1)
- Dynamo (1)
- Eichung (1)
- Eigenschaft (1)
- Einstellung (psychol) (1)
- Electronic stability program (1)
- Elektronisches Stabilitätsprogramm (1)
- Emission (1)
- Emission control (1)
- Emissionskontrolle (1)
- Engine capacity (1)
- Environment (1)
- Environment protection (1)
- Erfahrung (menschl) (1)
- Erste Hilfe (1)
- Erwachsener (1)
- European New Car Assessment Programme (1)
- Experience (human) (1)
- Experimental road (1)
- Expert system (1)
- Expertensystem (1)
- Fahrassistenzsystem (1)
- Fahrbahn (1)
- Fahrbahnüberquerung (1)
- Fahrbare Barriere (1)
- Fahrstreifen (1)
- Fahrstreifenwechsel (1)
- Fahrtauglichkeit (1)
- Fahrwerk (1)
- Fahrzeugabstand (1)
- Fahrzeugachse (1)
- Fahrzeugbeleuchtung (1)
- Fahrzeugteile (1)
- Failure (1)
- Farbe (1)
- Feuer (1)
- Finite element method (1)
- Fire (1)
- First aid (1)
- Force (1)
- Form (1)
- Four wheel drive (1)
- Fracht (1)
- Frau (1)
- Freight (1)
- Front (1)
- Fuel consumption (1)
- Future transport mode (1)
- Gebiet (1)
- Geländefahrzeug (1)
- Gestaltung (1)
- Grenzwert (1)
- Gussasphalt (1)
- Haftung (jur) (1)
- Halogen (1)
- Halogene (1)
- Harmonization (1)
- Hazard (1)
- Head (human) (1)
- Height (1)
- Hell (1)
- Hinten (1)
- Hubraum (1)
- Höhe (1)
- Hüfte (menschl) (1)
- In Bewegung (1)
- In service behaviour (1)
- In situ (1)
- Intelligent transport system (1)
- Intelligentes Verkehrssystem (1)
- Intersection (1)
- Interview (1)
- Italien (1)
- Italy (1)
- Itinerary (1)
- Japan (1)
- Kamera (1)
- Kleintransporter (1)
- Kleinwagen (1)
- Knotenpunkt (1)
- Kompatiblität (1)
- Kontakt Reifen Straße (1)
- Kooperatives System (ITS) (1)
- Kopf (menschl) (1)
- Korrelation (math, stat) (1)
- Kraft (1)
- Kraftstoffverbrauch (1)
- Körperstellung (1)
- Lane changing (1)
- Layout (1)
- Liability (1)
- Lichtstärke (1)
- Lieferfahrzeug (1)
- Light (colour) (1)
- Light intensity (1)
- Limit (1)
- Location (1)
- Lochstreifen (1)
- Market (1)
- Markt (1)
- Material (constr) (1)
- Mensch Maschine Verhältnis (1)
- Methode der finiten Elemente (1)
- Mobile barrier (1)
- Mobility (1)
- Mobilität (1)
- Motorhaube (1)
- Motorway (1)
- Moving (1)
- Nachfrage (1)
- Nachhaltigkeit (1)
- Naturalistic Driving (1)
- Naturalistic driving (1)
- Numerisches Modell (1)
- Oberfläche (1)
- On the spot accident investigation (1)
- Optimum (1)
- Optische Anzeige (1)
- Organisation (1)
- Organization (1)
- Ort (Position) (1)
- Overlapping (1)
- Overturning (veh) (1)
- Pelvis (1)
- Pfahl (1)
- Pile (1)
- Population (1)
- Posture (1)
- Properties (1)
- Prüefverfahren (1)
- Public relations (1)
- Public transport (1)
- Punched tape (1)
- Quality assurance (1)
- Qualitätssicherung (1)
- Radial (1)
- Reaction (human) (1)
- Reaktionsverhalten (1)
- Rear (1)
- Region (1)
- Reibungsbeiwert (1)
- Reiseweg (1)
- Research report (1)
- Retread tyre (1)
- Rippe (menschl) (1)
- Road (1)
- Road traffic (1)
- Robot (1)
- Roboter (1)
- Rolling resistance (1)
- Rollwiderstand (1)
- Runderneuerter Reifen (1)
- Safety fence (1)
- Saftey (1)
- Sample (stat) (1)
- Schall (1)
- Schulter (1)
- Schutzeinrichtung (1)
- Schutzhelm (1)
- Schweregrad (unfall (1)
- Schweregrad /Unfall (1)
- Schwingung (1)
- Seite (1)
- Shape (1)
- Shoulder (human) (1)
- Side (1)
- Side light (1)
- Social factors (1)
- Sound (1)
- Soziale Faktoren (1)
- Sport utility vehicle (1)
- Stability (1)
- Stadardization (1)
- Stadt (1)
- Stand der Technik (Bericht) (1)
- Standfestigkeit (1)
- State of the art report (1)
- Steuerung (1)
- Stichprobe (1)
- Stoßstange (1)
- Strain gauge (1)
- Surface (1)
- Surfacing (1)
- Sustainability (1)
- Tagesfahrlicht (1)
- Tageslicht (1)
- Technische Vorschriften (1)
- Technische Überwachung (1)
- Technische Überwachung (Fahrzeug) (1)
- Teenage driver (1)
- Telecommunication (1)
- Telekommunikation (1)
- Telematics (1)
- Telematik (1)
- Temperatur (1)
- Temperature (1)
- Tests (1)
- Toter Winkel (1)
- Toxicity (1)
- Toxizität (1)
- Traffic (1)
- Traffic control (1)
- Traffic lanes (1)
- Traffic motivation (1)
- Traffic regulation (1)
- Traffic regulations (1)
- Traffic sign (1)
- Traffic survey (1)
- Trailer (1)
- Train (1)
- Transparent (1)
- Transport infrastructure (1)
- Trend (stat) (1)
- Typenzulassung (1)
- USA (1)
- Umwelt (1)
- Umweltschutz (1)
- Underride prevention (1)
- Unfalldaten (1)
- Unfallneigung (1)
- Unfallverhuetung (1)
- United Kingdom (1)
- Unterleib (1)
- Untersuchung am Unfallort (1)
- Urban area (1)
- Vehicle Regulations (1)
- Vehicle lighting (1)
- Vehicle spacing (1)
- Veraenderung (1)
- Vereinigtes Königreich (1)
- Verhalten (1)
- Verkehr (1)
- Verkehrsinfrastruktur (1)
- Verkehrsmotivation (1)
- Verkehrssteuerung (1)
- Verkehrsuntersuchung (1)
- Verkehrszeichen (1)
- Versuchsstrecke (1)
- Verteilung (allg) (1)
- Verzögerung (1)
- Vibration (1)
- Video camera (1)
- Vierradantrieb (1)
- Vorne (1)
- Warnung (1)
- Wearing course (1)
- Winkel (1)
- Wirksamkeitsuntersuchung (1)
- Wirkungsanalyse (1)
- Woman (1)
- Zug (Eisenbahn) (1)
- Zukünftiges Verkehrsmittel (1)
- Zusammendrückung (1)
- verletzung) (1)
- Öffentlicher Verkehr (1)
- Öffentlichkeitsarbeit (1)
- Überdeckung (1)
- Überschlagen (1)
For the assessment of vehicle safety in frontal collisions, the crash compatibility between the colliding vehicles is crucial. Compatibility compromises both the self protection and the partner protection properties of vehicles. For the accident data analysis, the CCIS (GB) and GIDAS (DE) in-depth data bases were used. Selection criteria were frontal car accidents with car in compliance with ECE R94. For this study belted adult occupants in the front seats sustaining MAIS 2+ injuries were studied. Following this analysis FIMCAR concluded that the following compatibility issues are relevant: - Poor structural interaction (especially low overlap and over/underriding) - Compartment strength - Frontal force mismatch with lower priority than poor structural interaction In addition injuries arising from the acceleration loading of the occupant are present in a significant portion of frontal crashes. Based on the findings of the accident analysis the aims that shall be addressed by the proposed assessment approach were defined and priorities were allocated to them. The aims and priorities shall help to decide on suitable test procedures and appropriate metrics. In general it is anticipated that a full overlap and off-set test procedure is the most appropriate set of tests to assess a vehicle- frontal impact self and partner protection.
New vehicle types are extensively tested to check almost all factors that influence ride and handling. With reference to the Association of German Car Tuners" (VDAT e.V.) valuations, approximately 10% of all cars in Germany are being modified by their owners. 28 % of those modifications" sales are divergent wheel-tire combinations, 13 % are tuning measures on the chassis suspension or wheel spacers. In almost all cases the singular modifications present a general permission for specific vehicles they have been tested in. Combined tuning measures, however, are often checked by just one inspector, following a procedure of mostly subjective assessment criteria. Today, critical attributes are only being observed, in case a vehicle is involved in an accident and the modifications are identified as crash causal factors or as a cofactor on the development of a crash. For the first time, a field study allows a survey of safety affecting chassis modifications. The test layout has to comply with some basic conditions. Different vehicle concepts with a wide margin of modifications are required to get a high transferability of the results. A total amount of more than 150 tested vehicles serves the same purpose. The tests are limited concerning the installation time of measurement techniques and the requirement that no damage, defilement or immoderate wear of the vehicles are accepted by their owners. Due to such factors as well as the driver Ìs acceptance, the vehicles are controlled by its owners instead of robots or test drivers. For keeping down the driver- influence, the lane has narrow boundaries and the driver has to drive in strictly adherence to the given instructions. After gathering all modifications, as well as static and kinematic parameters like the toe and camber angle, dynamic testing of predominantly lateral dynamics is conducted. Besides standardized tests like the ISO 3888-2 (Obstacle Avoidance) or the ISO 14512 (Braking on Surfaces with Split Coefficient of Friction), to test the influence of modified kingpin offsets caused by wheel spacers, some deviant tests are conducted. Those are required due to the demand of objective test results for road tests with vertical induced stimulation of the chassis suspension. Hence, new tests on corner braking with and without vertical stimulation have been developed. The interpretation of data includes thresholds, e.g. the maximum entrance velocity without hitting cones, on the one hand, and the analysis of characteristics of data concerning time and frequency range, "1-second values" and peak response times on the other hand. Besides the thresholds as indicators for the achievable velocities, which are mainly affected by friction coefficients, the vehicle reaction in the course of time characterizes the vehicle reaction in the threshold range and consequently the operational demands on the driver. The field study has started and promises the first long-range analysis of chassis modifications. The results offer a basis for hypothesis and resultant further test layouts for oncoming studies of the identified critical tuning measures.
Vor dem Hintergrund der derzeitigen Verkehrs- und Unfallsituation sowie verkehrsrechtlicher Vorschriften wurde durch Auswertung humanwissenschaftlicher und technischer Literatur eine Sachstandsbeschreibung erstellt, die die in Zusammenhang mit Auffahrunfällen und ihrer Verhinderung stehenden Aspekte aufzeigt. Als fahrzeugtechnische Hilfen zur Einhaltung eines ausreichenden Abstandes zwischen hintereinander fahrenden Fahrzeugen werden dabei vorrangig autarke Systeme - das sind solche, bei denen sich alle notwendigen Vorrichtungen im Fahrzeug befinden - betrachtet. Möglichkeiten und Grenzen der bekannten technischen Hilfsmittel, insbesondere der Abstandswarn- und Abstandsregelungseinrichtungen werden aufgezeigt. Es stellte sich heraus, dass den Warnstrategien sowie ihren Auswirkungen auf den Verkehrsablauf und die Verkehrssicherheit besondere Bedeutung zukommt. In diesem Zusammenhang werden auch Zielkonflikte, insbesondere zwischen Sicherheitsforderungen und Fahrerakzeptanz, deutlich. Im Teil I des Berichts erfolgt die zusammenfassende Beschreibung und kritische Wertung des Sachstandes. Im Teil II werden die Auswerteergebnisse zu den angesprochenen Fragenkomplexen im einzelnen dargestellt. Teil III enthält eine Kurzdokumentation der für die Erstellung des Berichts wesentlichsten Literaturstellen.
Die zukünftige Entwicklung der Straßenverkehrssicherheit und damit auch der Fahrzeugsicherheit wird durch gesellschaftliche, wirtschaftliche, klimapolitische und verkehrspolitische Rand- und Rahmenbedingungen und die voranschreitende technische Entwicklung geprägt sein, die auch für den Gesetzgeber eine Herausforderung darstellen. So wird sich auch das Folgeprogramm des Bundesministeriums für Verkehr, Bau und Stadtentwicklung (BMVBS) für das derzeitige aus dem Jahr 2001 stammende "Programm für mehr Sicherheit im Straßenverkehr" an den Schwerpunkten des "4th Road Safety Action Programme" ausrichten, das im Frühjahr 2010 durch die EU-Kommission veröffentlicht werden soll. Im Prozess zu einer weiteren Verbesserung der Straßenverkehrssicherheit werden unter anderem der demografische Wandel in unserer Gesellschaft, die durch eine erforderliche CO2-Reduktion bedingte Einführung alternativer Antriebe (Elektromobilität) verbunden mit Leichtbau sowie die gesetzlichen Rahmenbedingung (Wiener Abkommen) eine bedeutende Rolle spielen. Die Klärung der gesetzlichen Rahmenbedingungen ist unerlässlich, um die Vision vom unfallfreien Fahren Realität werden lassen zu können.
Ziel des Forschungsvorhabens war es, durch gezielte Auswertung des Unfallgeschehens den Einfluss von Fahrerverhaltensweisen beziehungsweise -merkmalen und technischen Fahrzeugparametern auf die Unfallhäufigkeit und die Unfallart zu ermitteln. Zunächst wurde eine Auswertung der Literatur und die Beschaffung und Aufbereitung des Datenmaterials vorgenommen. Die Grundlage der Auswertungen bildeten die Unfälle mit Pkw-Beteiligung im Bundesland Nordrhein-Westfalen aus dem Jahre 1980. Die Datensätze waren vom Kraftfahrt-Bundesamt in Flensburg um fahrzeugtechnische Angaben erweitert worden. Zur Relativierung der Unfallzahlen wurden fahrzeugtypenspezifische jährliche Fahrleistungen und Bestände berechnet. Weiterhin wurde das Geschwindigkeitsverhalten im freien Verkehr in Abhängigkeit vom Fahreralter sowie vom Fahrzeugtyp ermittelt. Um die Wechselwirkungen von Fahrer- und Fahrzeugeigenschaften im Unfallgeschehen unabhängig voneinander betrachten zu können, war es notwendig, einen "Normalfahrer" zu definieren. Der "Normalfahrer" wurde anhand von Analysen ausgewählter Unfallsituationen mit dem Ziel beschrieben, mit diesen Fahrern Fahrversuche mit Pkw durchführen zu können, deren Ergebnisse weder durch besonders gute noch durch besonders schlechte, sondern vielmehr durch eine durchschnittliche Eignung des Fahrers zum Führen eines Kraftfahrzeuges geprägt sein sollen. Anhand dieser Fahrversuche sollen Grenzen von Kennwerten, die Fahrzeugeigenschaften und das Fahrverhalten beschreiben, abgeleitet werden, die sich als dem "Normalfahrer" angepasst erweisen. Aufgrund der aufgezeigten Zusammenhänge zwischen dem Fahreralter und der ursächlichen Beteiligung an bestimmten Unfalltypen ist es nunmehr möglich, durchschnittlich gute Fahrer als Probanden auszuwählen, die je nach Art des Versuches entweder zur Gruppe der jüngeren und älteren Fahrer gehören. Nach vorheriger Festlegung eines Anteilswertes von Fahrern, die als "normal" anzusehen sind, können bei gleichzeitiger Berücksichtigung der für jüngere und ältere Fahrer typischen Versagensarten die Altersintervalle bestimmt werden, aus denen die "Normalfahrer" für die Fahrversuche auszuwählen sind.
Beschrieben wird die Evaluierung eines Testverfahrens der Arbeitsgruppe 10 des European Experimental Vehicle Committee, mit dem die "Fußgängerverträglichkeit" von Frontflächen von Personenkraftwagen bestimmt werden kann. Dabei werden verschiedene Anprallarten von Fußgängern an Fahrzeugen simuliert: der Anprall eines Beines an den Stoßfänger, der Anprall des Oberschenkels an die Vorderkante der Fronthaube und der Anprall des Kopfes auf die Fronthaube. Im Beitrag wird auf die Durchführung von Tests zum Oberschenkelanprall und zum Beinanprall an drei verschiedenen Fahrzeugtypen eingegangen. Beschrieben werden Testverfahren, Versuchsaufbau und Versuchsdurchführung. Die Versuchsreihe zeigte, dass das entwickelte Testverfahren praktikabel ist.
Thoracic injury is one of the predominant types of severe injuries in frontal accidents. The assessment of the injury risk to the thorax in the current frontal impact test procedures is based on the uni-axial chest deflection measured in the dummy Hybrid III. Several studies have shown that criteria based on the linear chest potentiometer are not sensitive enough to distinguish between different restraint systems, and cannot indicate asymmetric chest loading, which has been shown to correlate to increased injury risk. Furthermore, the measurement is sensitive to belt position on the dummy chest. The objective of this study was to evaluate the optical multipoint chest deflection measurement system "RibEye" in frontal impact sled tests. Therefore the sensitivity of the RibEyesystem to different restraint system parameters was investigated. Furthermore, the issue of signal drop out at the 6 th rib was investigated in this study.A series of sled tests were conducted with the RibEye system in the Hybrid III 50%. The sled environment consisted of a rigid seat and a standard production three-point seat belt system. Rib deflections were recorded with the RibEye system and additionally with the standard chest potentiometer. The tests were carried out at crash pulses of two different velocities (30 km/h and 64 km/h). The tests were conducted with different belt routing to investigate the sensitivity of chest deflection measurements to belt position on the dummy chest. Furthermore, different restraint system parameters were investigated (force limiter level, with or without pretensioning) to evaluate if the RibEye measurements provide additional information to distinguish between restraint system configurations . The results showed that with the RibEye system it was possible to identify the effect of belt routing in more detail. The chest deflections measured with the standard chest potentiometer as well as the maximum deflection measured by RibEye allowed the distinction to be made between different force limiter levels. The RibEye system was also able to clearly show the asymmetric deflection of the rib cage due to belt loading. In some configurations, differences of more than 15 mm were observed between the left and side areas of the chest. Furthermore, the abdomen insert was identified as source of the problem of signal drop out at the 6th rib. Possible solutions are discussed. In conclusion, the RibEye system provided valuable additional information regarding the assessment of restraint systems. It has the potential to enable the evaluation of thoracic injury risk due to asymmetric loading. Further investigations with the RibEye should be extended to tests in a vehicle environment, which include a vehicle seat and other restraint system components such as an airbag.
Evaluation of the performance of competitive headforms as test tools for interior headform testing
(2009)
The European Research Project APROSYS has evaluated the interior headform test procedure developed by EEVC WG 13, representing the head contact in the car during a lateral impact. One important aspect within this test procedure was the selection of an appropriate impactor. The WG13 procedure currently uses the Free Motion Headform as used within the FMVSS 201. The ACEA 3.5 kg headform used in Phase 1 of the European Directive and the future European Regulation on Pedestrian Protection is still discussed as a possible alternative. This paper reports work performed by the Federal Highway Research Institute (BASt) as a part of the APROSYS Task 1.1.3. The study compares the two headform impactors according to FMVSS and ACEA, in a series of basic tests in order to evaluate their sensitivity towards different impact angles, impact accuracy, the effect of differences to impactors of the same type and the effects of the repeatability and reproducibility of the test results. The test surface consisted of a steel tube covered with PU foam and PVC, representing the car interior to be tested. Despite of the higher mass of the FMH the HIC values of this impactor were generally lower than those of the ACEA headform. The FMH showed a higher repeatability of test results but a high sensitivity on the angle of roll, the spherical ACEA impactor performed better with regards to the reproducibility. In case of the ACEA impactor-, the angle of roll had no influence.
The PDB, BASt and Opel conducted two test series to evaluate possible effects on the results obtained using the EEVC WG17 Lower Legform Impactor as a test tool for the assessment of pedestrian safety. The reproducibility and repeatability of the test results were assessed using six legform impactors while keeping the test parameters constant. In the second series one impactor was used and the test parameters were varied to assess the effects on the readings of the legform. The test parameters were velocity, temperature, relative humidity, the point of first contact regarding the deviation in z-direction and the deviations of the pitch, roll and yaw angle. The tests were performed using an inverse setup, i.e. the legform was hit by a guided linear impactor equipped with a honeycomb deformation element. This setup was chosen to be able to vary each single parameter while avoiding variations of the other test parameters at the same time. The test parameters were varied stronger than allowed in regulatory use in order to determine possible dependencies between the parameters and the readings which were acceleration, bending angle and shear displacement.
It is well known that most accidents with pedestrians are caused by the driver not being alert or misinterpreting the situation. For that reason advanced forward looking safety systems have a high potential to improve safety for this group of vulnerable road users. Active pedestrian protection systems combine reduction of impact speed by driver warning and/or autonomous braking with deployment of protective devices shortly before the imminent impact. According to the Euro NCAP roadmap the Autonomous Emergency Braking system tests for Pedestrians Protection will be set in force from 2016 onwards. Various projects and organisations in Europe are developing performance tests and assessment procedures as accompanying measures to the Euro NCAP initiative. To provide synthesised input to Euro NCAP so-called Harmonisation Platforms (HP-) have been established. Their main goal is to foster exchange of information on key subjects, thereby generating a clear overview of similarities and differences on the approaches chosen and, on that basis, recommend on future test procedures. In this paper activities of the Harmonisation Platform 2 on the development of Test Equipment are presented. For the testing targets that mimic humans different sensing technologies are required. A first set of specifications for pedestrian targets and the propulsion systems as collected by Harmonisation Platform 2 are presented together with a first evaluation for a number of available tools.