91 Fahrzeugkonstruktion
Refine
Year of publication
Document Type
- Conference Proceeding (82)
- Book (35)
- Article (16)
- Working Paper (12)
- Part of a Book (5)
Keywords
- Safety (67)
- Sicherheit (66)
- Fahrzeug (50)
- Vehicle (50)
- Bewertung (43)
- Anfahrversuch (39)
- Evaluation (assessment) (39)
- Impact test (veh) (36)
- Deutschland (35)
- Germany (35)
- Test method (34)
- Prüfverfahren (33)
- Versuch (31)
- Test (30)
- Conference (28)
- Fußgänger (28)
- Pedestrian (28)
- Konferenz (27)
- Car (22)
- Forschungsbericht (22)
- Unfall (22)
- Research report (21)
- Accident (20)
- Collision (19)
- Pkw (19)
- Anthropometric dummy (18)
- Driver assistance system (17)
- Dummy (17)
- Fahrerassistenzsystem (17)
- Kompatibilität (17)
- Zusammenstoß (17)
- Compatibility (16)
- Frontalzusammenstoß (16)
- Simulation (16)
- Gesetzgebung (15)
- Head on collision (15)
- Legislation (15)
- Passives Sicherheitssystem (15)
- Method (14)
- Passive safety system (14)
- Verfahren (14)
- Child (12)
- Injury (12)
- Kind (12)
- Verletzung (12)
- Analyse (math) (11)
- Analysis (math) (11)
- Improvement (11)
- Schlag (11)
- Schweregrad (Unfall, Verletzung) (11)
- Shock (11)
- Technische Vorschriften (Kraftfahrzeug) (11)
- Unfallverhütung (11)
- Vehicle regulations (11)
- Verbesserung (11)
- Accident prevention (10)
- Automatic (10)
- Automatisch (10)
- Development (10)
- Entwicklung (10)
- Fahrzeugführung (10)
- Prevention (10)
- Radfahrer (10)
- Research project (10)
- Severity (accid, injury) (10)
- Wirtschaftlichkeitsrechnung (10)
- Active safety system (9)
- Aktives Sicherheitssystem (9)
- Ausrüstung (9)
- Autonomes Fahren (9)
- Autonomous driving (9)
- Biomechanics (9)
- Biomechanik (9)
- Cost benefit analysis (9)
- Driver information (9)
- EU (9)
- Elektronische Fahrhilfe (9)
- Equipment (9)
- Ergonomics (9)
- Europa (9)
- Europe (9)
- Fahrerinformation (9)
- Fahrstabilität (9)
- Forschungsarbeit (9)
- Head (9)
- Kopf (9)
- Motorcycle (9)
- Motorrad (9)
- Technologie (9)
- Technology (9)
- Vehicle handling (9)
- Cyclist (8)
- Driving (veh) (8)
- Electronic driving aid (8)
- Insasse (8)
- Lkw (8)
- Lorry (8)
- Messung (8)
- Severity (accid (8)
- Standardisierung (8)
- Vehicle occupant (8)
- injury) (8)
- Bemessung (7)
- Bremsung (7)
- Decrease (7)
- Design (overall design) (7)
- Driver (7)
- Efficiency (7)
- Fahrer (7)
- Leistungsfähigkeit (allg) (7)
- Measurement (7)
- Perception (7)
- Reifen (7)
- Safety belt (7)
- Seitlicher Zusammenstoß (7)
- Sicherheitsgurt (7)
- Side impact (7)
- Tyre (7)
- Verhütung (7)
- Verletzung) (7)
- Verminderung (7)
- Wahrnehmung (7)
- Braking (6)
- Collision avoidance system (6)
- Deformation (6)
- Deformierbare Barriere (Anpralltest) (6)
- Ergonomie (6)
- Geschwindigkeit (6)
- Impact test (6)
- Knee (human) (6)
- Prüfstand (6)
- Schweregrad (Unfall (6)
- Speed (6)
- Standardization (6)
- Statistik (6)
- Test rig (6)
- Antikollisionssystem (5)
- Aufprallschlitten (5)
- Belastung (5)
- Brustkorb (5)
- Communication (5)
- Electric vehicle (5)
- Elektrofahrzeug (5)
- Error (5)
- Fehler (5)
- Fuel consumption (5)
- Gewicht (5)
- Human body (5)
- Impact sled (5)
- Kommunikation (5)
- Kraftstoffverbrauch (5)
- Lenken (Fahrzeug) (5)
- Load (5)
- Official approval (5)
- Risiko (5)
- Risk (5)
- Steering (process) (5)
- Thorax (5)
- Verformung (5)
- Warning (5)
- Weight (5)
- Accident rate (4)
- Airbag (4)
- Auffahrunfall (4)
- Bein (menschl) (4)
- Body (car) (4)
- Brennstoffzelle (4)
- Datenbank (4)
- Deformable barrier (impact test) (4)
- Emission (4)
- Fahrzeuginnenraum (4)
- Fahrzeugsitz (4)
- Fuel cell (4)
- Headlamp (4)
- Hybrid vehicle (4)
- Hybridfahrzeug (4)
- Interior (veh) (4)
- Karosserie (4)
- Knie (menschl) (4)
- Layout (4)
- Leg (human) (4)
- Market (4)
- Markt (4)
- Menschlicher Körper (4)
- Modification (4)
- Nachfrage (4)
- Norm (tech) (4)
- Rear end collision (4)
- Reproducibility (4)
- Reproduzierbarkeit (4)
- Richtlinien (4)
- Scheinwerfer (4)
- Seat (veh) (4)
- Sensor (4)
- Specification (standard) (4)
- Specifications (4)
- Straßenverkehrsrecht (4)
- Unfallhäufigkeit (4)
- Abstandsregeltempomat (3)
- Adaptive cruise control (3)
- Air bag (restraint system) (3)
- Aktive Sicherheit (3)
- Alte Leute (3)
- Antrieb (tech) (3)
- Benutzung (3)
- Bicycle (3)
- Bildschirm (3)
- Brake light (3)
- Bremslicht (3)
- Bruch (mech) (3)
- Database (3)
- Daylight (3)
- Demand (3)
- Emergency (3)
- Fahrrad (3)
- Fahrzeugbeleuchtung (3)
- Failure (3)
- Fatality (3)
- Gestaltung (3)
- Haftung (jur) (3)
- Increase (3)
- Industrie (3)
- Industry (3)
- Intelligent transport system (3)
- Kamera (3)
- Kraftfahrzeug (3)
- Leuchtdichte (3)
- Liability (3)
- Luminance (3)
- Mensch Maschine Verhältnis (3)
- Messgerät (3)
- Notfall (3)
- Oberfläche (3)
- Propulsion (3)
- Prototyp (3)
- Prototype (3)
- Rear view mirror (3)
- Road user (3)
- Rückspiegel (3)
- Statistics (3)
- Surface (3)
- Tageslicht (3)
- Traffic regulations (3)
- Tödlicher Unfall (3)
- Unfallrekonstruktion (3)
- Unterfahrschutz (3)
- Use (3)
- Vehicle inspection (3)
- Vehicle lighting (3)
- Vergrößerung (3)
- Verkehrsteilnehmer (3)
- Veränderung (3)
- Visual display (3)
- Warnung (3)
- Windschutzscheibe (3)
- Windscreen (veh) (3)
- Abblendlicht (2)
- Active safety (2)
- Adult (2)
- Ankündigung (2)
- Anti locking device (2)
- Apparatus (measuring) (2)
- Autobahn (2)
- Autonomes Fahrzeug (2)
- Autonomous vehicle (2)
- Baumusterzulassung (2)
- Behaviour (2)
- Bicyclist (2)
- Blind spot (veh) (2)
- Bumper (2)
- Camera (2)
- Carriageway (2)
- Cause (2)
- Classification (2)
- Comfort (2)
- Crash Test (2)
- Crashtest (2)
- Data acquisition (2)
- Datenerfassung (2)
- Dauerhaftigkeit (2)
- Decke (Straße) (2)
- Delivery vehicle (2)
- Detection (2)
- Detektion (2)
- Dipped headlight (2)
- Durability (2)
- Elektronisches Stabilitätsprogramm (2)
- Empfindlichkeit (2)
- Erwachsener (2)
- Evaluation (2)
- Fahrbahn (2)
- Fahrleistung (2)
- Fahrzeugteile (2)
- Forecast (2)
- Freight transport (2)
- Front (2)
- Future transport mode (2)
- Gütertransport (2)
- Highway (2)
- Hinten (2)
- Impact study (2)
- Individueller Verkehr (2)
- Information (2)
- Intelligentes Transportsystem (2)
- International (2)
- Klassifizierung (2)
- Knie (2)
- Knotenpunkt (2)
- Komfort (2)
- Kontakt Reifen-Straße (2)
- Kunststoff (2)
- Landstraße (2)
- Mathematical model (2)
- Motorway (2)
- Nacht (2)
- Night (2)
- Old people (2)
- Optimum (2)
- Plastic material (2)
- Private transport (2)
- Prognose (2)
- Rear (2)
- Rechenmodell (2)
- Reconstruction (accid) (2)
- Road traffic (2)
- Rolling resistance (2)
- Rollwiderstand (2)
- Safety glass (2)
- Sample (mater) (2)
- Schutz (2)
- Sensitivity (2)
- Sicherheitsglas (2)
- Sichtbarkeit (2)
- Stoßstange (2)
- Straße (2)
- Straßenverkehr (2)
- Surfacing (2)
- Technische Überwachung (Fahrzeug) (2)
- Toter Winkel (2)
- Traffic (2)
- Traffic control (2)
- Transport infrastructure (2)
- Underride protection (2)
- Ursache (2)
- Vehicle mile (2)
- Vereinigtes Königreich (2)
- Verhalten (2)
- Verkehr (2)
- Verkehrsinfrastruktur (2)
- Verkehrssteuerung (2)
- Versuchspuppe (2)
- Visibility (2)
- Zukünftiges Verkehrsmittel (2)
- Zulassung (tech) (2)
- Zusammenstoss (2)
- Abbiegen (1)
- Abdomen (1)
- Accident data (1)
- Accident proneness (1)
- Accident reconstruction (1)
- Achslast (1)
- Aged people (1)
- Alternative Energie (1)
- Alternative energy (1)
- Angle (1)
- Anhänger (1)
- Anordnung (1)
- Anthropometric body (1)
- Antiblockiereinrichtung (1)
- Antiblockiersystem (1)
- Antikollisisonssystem (1)
- Apparatus (measurement) (1)
- Aquaplaning (1)
- Arbeitsgruppe (1)
- Armaturenbrett (1)
- Articulated vehicle (1)
- Auspuff (1)
- Axle load (1)
- Ballungsgebiet (1)
- Battery (1)
- Bau (1)
- Bearing capacity (1)
- Behinderter (1)
- Benefit cost analysis (1)
- Betriebsverhalten (1)
- Blendung (1)
- Bonnet (car) (1)
- Brake (1)
- Breaking (1)
- Breite (1)
- Bremse (1)
- Bridge (1)
- Brücke (1)
- Bus (1)
- Calibration (1)
- Carbon monoxide (1)
- Catalysis (1)
- Chassis (1)
- Colour (1)
- Compatiblity (1)
- Components of the car (1)
- Components of the vehicle (1)
- Compression (1)
- Construction (1)
- Contact (Tyre road) (1)
- Contact (tyre road) (1)
- Control (1)
- Conurbation (1)
- Cooperative intelligent transport system (1)
- Correlation (math, stat) (1)
- Corrosion (1)
- Crash helmet (1)
- Crossing the road (pedestrian) (1)
- Damage (1)
- Dashboard (1)
- Data bank (1)
- Data processing (1)
- Data security (1)
- Data transmission (1)
- Datensicherheit (1)
- Datenverarbeitung (1)
- Datenübertragung (telekom) (1)
- Daytime running light (1)
- Deceleration (1)
- Deckschicht (1)
- Deformable barrier (Impact test) (1)
- Deformable barrier system (impact test) (1)
- Dehnungsmessstreifen (1)
- Demand (econ) (1)
- Demographie (1)
- Diesel engine (1)
- Dieselmotor (1)
- Digital model (1)
- Disabled person (1)
- Dispersion (stat) (1)
- Driving (1)
- Druck (1)
- Dynamic penetration test (1)
- Dynamo (1)
- EU directive (1)
- EU-Richtlinie (1)
- Echtzeit (1)
- Eichung (1)
- Electrode (1)
- Electronic stability program (1)
- Elekronic stability program (1)
- Elektrode (1)
- Emission control (1)
- Emissionskontrolle (1)
- Energieeinsparung (1)
- Energy conservation (1)
- Engine capacity (1)
- Environment (1)
- European New Car Assessment Programme (1)
- Evaluation (Assessment) (1)
- Exhaust pipe (1)
- Expert system (1)
- Expertensystem (1)
- Fahrassistenzsystem (1)
- Fahrbahnüberquerung (1)
- Fahrbare Barriere (1)
- Fahrstreifen (1)
- Fahrstreifenwechsel (1)
- Fahrwerk (1)
- Fahrzeugabstand (1)
- Farbe (1)
- Federung (1)
- Fernverkehrsstraße (1)
- Festigkeit (1)
- Feuer (1)
- Feuerlöscher (1)
- Finite element method (1)
- Fire (1)
- Fire extinguisher (1)
- Force (1)
- Form (1)
- France (1)
- Frankreich (1)
- Frau (1)
- Fuel (1)
- Gebraucht (1)
- Gelenkfahrzeug (1)
- Gelände (1)
- Geländefahrzeug (1)
- Gierverhalten (1)
- Glare (1)
- Goods traffic (1)
- Grenzwert (1)
- Güterverkehr (1)
- Harmonisation (1)
- Harmonisierung (1)
- Harmonization (1)
- Head (human) (1)
- Height (1)
- Hell (1)
- Hubraum (1)
- Hydrocarbon (1)
- Höhe (1)
- Hüfte (menschl) (1)
- In Bewegung (1)
- In service behaviour (1)
- In situ (1)
- Information documentation (1)
- Information management (1)
- Intelligentes Verkehrssystem (1)
- Interactive model (1)
- Interaktives Modell (1)
- Intersection (1)
- Junction (1)
- Katalyse (1)
- Kleintransporter (1)
- Kohlenmonoxid (1)
- Kohlenwasserstoff (1)
- Kompatiblität (1)
- Kontrolle (1)
- Kooperatives System (ITS) (1)
- Kopf (menschl) (1)
- Korrelation (math, stat) (1)
- Korrosion (1)
- Kraft (1)
- Kraftstoff (1)
- Kraftübertragung (Fahrzeug) (1)
- Landstrasse (1)
- Lane changing (1)
- Lang-Lkw (1)
- Leicht (1)
- Length (1)
- Lenkrad (1)
- Leuchtdiode (1)
- Lichtstärke (1)
- Lieferfahrzeug (1)
- Light (colour) (1)
- Light emitting diode (1)
- Light intensity (1)
- Lightweight (1)
- Limit (1)
- Longer and heavier vehicle (1)
- Länge (1)
- Lärm (1)
- Main road (1)
- Measuring (1)
- Menschlicher körper (1)
- Methode der finiten Elemente (1)
- Mobile barrier (1)
- Modell (1)
- Modell (non math) (1)
- Motor (1)
- Motorhaube (1)
- Moving (1)
- Nasse Straße (1)
- Naturalistic Driving (1)
- Naturalistic driving (1)
- Noise (1)
- Number (1)
- Numerisches Modell (1)
- Oberbau (1)
- On the right (1)
- Organisation (1)
- Organization (1)
- Overlapping (1)
- Passive Sicherheit (1)
- Pavement (1)
- Pelvis (1)
- Pfahl (1)
- Pile (1)
- Pkw; Verhütung (1)
- Pollutant (1)
- Population (1)
- Pressure (1)
- Probe (1)
- Prüefverfahren (1)
- Prüfkörper (1)
- Psychological aspects (1)
- Psychologische Gesichtspunkte (1)
- Public transport (1)
- Quality (1)
- Quality assurance (1)
- Qualität (1)
- Qualitätssicherung (1)
- Radio (1)
- Rammsondierung (1)
- Reaction (human) (1)
- Reaktionsverhalten (1)
- Real time (1)
- Rechts (1)
- Reflectorized material (1)
- Reflexstoffe (1)
- Reifenprofil (1)
- Retread tyre (1)
- Rippe (menschl) (1)
- Road (1)
- Road network (1)
- Robot (1)
- Roboter (1)
- Route guidance (1)
- Runderneuerter Reifen (1)
- Rundfunk (1)
- Rural road (1)
- Sachschaden (1)
- Safety fence (1)
- Schadstoff (1)
- Schallpegel (1)
- Schulter (1)
- Schutzeinrichtung (1)
- Schutzhelm (1)
- Schweregrad /Unfall (1)
- Schwingung (1)
- Second hand (1)
- Seite (1)
- Shape (1)
- Shoulder (human) (1)
- Side (1)
- Social factors (1)
- Sound level (1)
- Soziale Faktoren (1)
- Sport utility vehicle (1)
- Stadardization (1)
- Stadt (1)
- Stand der Technik (Bericht) (1)
- Standardabweichung (1)
- State of the art report (1)
- Statistic (1)
- Steering wheel (1)
- Steifigkeit (1)
- Steuerung (1)
- Stiffness (1)
- Strain gauge (1)
- Straßennetz (1)
- Strength (mater) (1)
- Surveillance (1)
- Suspension (veh) (1)
- Sustainability (1)
- Tagesfahrlicht (1)
- Technische Vorschriften (1)
- Technische Überwachung (1)
- Telecommunication (1)
- Telekommunikation (1)
- Telematics (1)
- Telematik (1)
- Terrain (1)
- Tests (1)
- Toxicity (1)
- Toxizität (1)
- Traffic assignment (1)
- Traffic flow (1)
- Traffic lanes (1)
- Traffic regulation (1)
- Traffic sign (1)
- Tragfähigkeit (1)
- Trailer (1)
- Train (1)
- Transmission (veh) (1)
- Transport (1)
- Tunnel (1)
- Turning (1)
- Typenzulassung (1)
- Tyre tread (1)
- USA (1)
- Umwelt (1)
- Umweltfreundlichkeit (1)
- Underride prevention (1)
- Unfalldaten (1)
- Unfallneigung (1)
- United Kingdom (1)
- United kingdom (1)
- Unterleib (1)
- Urban area (1)
- Vehicle Regulations (1)
- Vehicle spacing (1)
- Veraenderung (1)
- Verkehrsfluss (1)
- Verkehrsumlegung (1)
- Verkehrszeichen (1)
- Verzögerung (1)
- Vibration (1)
- Video camera (1)
- Vorn (1)
- Vorne (1)
- Wasser (1)
- Water (1)
- Wearing course (1)
- Wet road (1)
- Width (1)
- Winkel (1)
- Wirksamkeitsuntersuchung (1)
- Wirkungsanalyse (1)
- Woman (1)
- Working group (1)
- Yawing (veh) (1)
- Zahl (1)
- Zielführungssystem (1)
- Zug (Eisenbahn) (1)
- Zusammendrückung (1)
- Öffentlicher Verkehr (1)
- Überdeckung (1)
Institute
- Abteilung Fahrzeugtechnik (150) (remove)
Qualität von on-trip Verkehrsinformationen im Straßenverkehr : BASt-Kolloquium 23. und 24.03.2011
(2011)
Am 23. und 24. März 2011 veranstaltete die Bundesanstalt fuer Straßenwesen ein, um die Ergebnisse der erwähnten Projekte und Initiativen präsentieren zu lassen und mit anderen Experten zu diskutieren. Der vorliegende Tagungsband fasst die Ergebnisse des Kolloquiums zur "Qualität von on-trip Verkehrsinformationen" zusammen. Die Bereitstellung von Verkehrsinformationen ist geprägt von vielen Akteuren. Die Wertschöpfungskette beginnt bei der Sammlung grundlegender Verkehrsdaten zur Erstellung von Verkehrsinformationen und setzt sich mit der Datenverarbeitung und -interpretation bis hin zur Meldungserstellung fort. Die Weitergabe kann über verschiedene Übertragungsmedien erfolgen und beim Nutzer (z.B. im Navigationsgerät) empfangen werden. Jeder einzelne Schritt der Wertschoepfungskette kann sowohl von unterschiedlichen Partnern (privat oder öffentlich) übernommen werden als auch in der Hand eines Partners liegen. Diese Komplexität der Zusammenarbeit spiegelt sich demzufolge auch in Qualitätsmanagementprozessen wider. Im Rahmen des Kolloquiums wurden zwei wesentliche Qualitätsaspekte näher betrachtet: - die Datenqualität mit dem Focus auf Aktualitaet, Stimmigkeit der Daten verglichen mit einer gemessenen Realitaet sowohl zu Beginn der Wertschöpfungskette als auch an jeglichen Schnittstellen, - die Prozessqualität, welche sich insbesondere mit der reibungslosen Datenübergabe an den Schnittstellen der Wertschoepfungskette beschäftigt. Beide Qualitätsaspekte helfen zu verstehen, worin die heutigen Qualitätsprobleme bestehen und welche Massnahmen im Einzelnen ergriffen werden müssten, um eine nachhaltige Verbesserung zu erreichen. Einerseits kann es vorkommen, dass die Information über ein Verkehrsereignis an einer oder mehreren Stellen der Wertschöpfungskette korrekt vorliegt, jedoch durch ungenuegende technische oder organisatorische Schnittstellen im Prozessablauf wieder verloren geht und dem Nutzer folglich nicht zur Verfügung steht. Prominentes Beispiel eines solchen Problems in der Prozessqualität ist die fehlerhafte Interpretation der Meldung im Navigationsgerät, denkbar sind solche Informationsverluste jedoch an jeder Stelle der Wertschoepfungskette. Eine wichtige Massnahme zur Verbesserung der Prozessqualität ist die Standardisierung sowie die Überprüfung, ob die definierten Standards an jeder Stelle der Wertschöpfungskette eingehalten werden. Andererseits kann es vorkommen, dass die Datenqualität in Bezug auf ihre Genauigkeit von Anfang an so schlecht ist, dass der Nutzer eine fehlerhafte oder gar keine Nachricht übermittelt bekommt. Beispiel hierfür ist die Vielzahl von Stauereignissen, die entweder nicht gesendet wurden oder gesendet wurden, obwohl sie nicht vorhanden waren. Eine wichtige Massnahme zur Verbesserung dieser Situation ist die Verbesserung der Ereignisdetektion. Der Tagungsband enthaelt Präsentationen, die den Status Quo analysieren, Methoden zur verbesserten Datenerfassung vorschlagen und Möglichkeiten zur Verbesserung von Daten- und Prozessqualität vorstellen. Offen geblieben sind darüber hinaus folgende Fragestellungen: - Wie kann die Prozessqualität der gesamten Wertschöpfungskette bei der Vielzahl der Partner kontrolliert werden? Wer überwacht die Wertschöpfungskette? Wird hierfuer überhaupt eine zentrale Stelle benötigt? Oder ist es ausreichend, wenn jeder Partner eine angemessene Eingangs bzw. Ausgangskontrolle durchführt? - Obwohl es nur eine Realität gibt, entsteht doch Wettbewerb über die (Qualität der) Information zu dieser Realität. Wie kann Konsistenz zwischen allen Anbietern von sicherheitsrelevanten Informationen erreicht werden? Wo sollte der Wettbewerb enden und wie kann dies technisch, organisatorisch und wirtschaftlich realisiert werden? - Welche Prozesse sollten geschaffen werden, um Partner zu integrieren, die sich nicht an geschaffene Qualitätsstandards halten (z.B. kommerzielle Diensteanbieter, die nicht mit der Verkehrsinformationsszene vernetzt sind)? - Und nicht zuletzt, wie kann die Wahrnehmung des Nutzers über verschiedene Qualitätslevel unterschiedlicher Produkte verbessert werden? Ist der Nutzer in der Lage, die unterschiedlichen Qualitätsstufen von Verkehrssystemen zu unterscheiden? Falls nicht, welche Art von Unterstuetzung braucht der Kunde? Ein "European Information Services Assessment Programme" vergleichbar zu Euro NCAP für Fahrzeuge? Die Ergebnisse des Kolloquiums sollen die laufende Diskussion um die Verbesserung der Qualität von Verkehrsinformationen unterstützen.
Bei der Untersuchung des Insassenschutzes von Pkw's bei Seitenkollisionen wurden als seitlich auftreffende Fahrzeuge neben Pkw auch unterschiedliche Barrierenformen verwendet. Um die Zahl der Prüfungen im Typgenehmigungsverfahren für neue Pkw-Modelle gering zu halten, wurde von der europäischen Automobilindustrie ein Vorschlag zur Harmonisierung europäischer und amerikanischer Lösungen entwickelt. Es wurden zwei Versuchsserien zur Beurteilung des Quergeschwindigkeitseinflusses mit Fahrzeugen europäischer Größenverhältnisse durchgeführt sowie eine Serie mit einer Versuchskonfiguration, die zur Harmonisierung vorgeschlagen wurde. Die Untersuchungsergebnisse zeigen, dass die Kombination einer mobilen deformierbaren Barriere mit Bewegungsparametern zur Simulation eines Querbewegungseinflusses durch kinematische Umkehrung am gestoßenen Fahrzeug nur zu einem geringen Teil die gleiche Belastung bewirkt, wie bei der Kollision mit zwei bewegten Fahrzeugen.
Für eine Reihe von EU Regelungen im Bereich Fahrzeugsicherheit erlaubt eine Verordnung bereits seit dem Jahr 2010 virtuelles Testen für die Typzulassungsprüfung. Technische Details bzw. konkrete Prozeduren für spezifische Regelungen sind in dieser Verordnung jedoch nicht enthalten. Das Hauptziel des europäischen Projekts IMVITER (lmplementation of Virtual Testing in Safety Regulations) war es, basierend auf der neuen Verordnung ein virtuelles Testverfahren auszuarbeiten und dabei offene Fragen zu berücksichtigen. Um die im Projekt-Konsortium unter Berücksichtigung der Anliegen aller Interessensgruppen wie Autohersteller, Zulassungsbehörden und technischer Dienste erarbeiteten offenen Punkte zu adressieren, wurde ein generisches Flussdiagramm entwickelt, das den Ablauf einer virtuell basierten Typprüfung darstellt. ln diesem Diagramm ist der virtuelle Typgenehmigungsprozess in drei aufeinander folgende Phasen aufgeteilt, die Verifikations-, Validierungs- und Typgenehmigungsphase. Von entscheidender Bedeutung ist die Phase der Validierung des Simulationsmodells, für die im IMVITER-Projekt eine Methodik vorgeschlagen wurde. Mit der im Projekt vorgeschlagenen Validierungsmethode ist kein Austausch des Simulationsmodells zwischen Fahrzeughersteller und technischem Dienst notwendig, so dass die Vertraulichkeit von Betriebsgeheimnissen nicht gefährdet ist. Zur Validierung des Modells werden jedoch immer Versuche notwendig sein. Dies gilt sowohl für die Überpruefung von passiven als auch aktiven Fahrzeugsicherheitssystemen. Eine zusammenfassende Betrachtung der Erfahrungen aus dem IMVITER-Projekt ergab, dass mit der Einführung von virtuellem Testen keine Erhöhung der Anforderungen an die Fahrzeugsicherheit bzgl. bestehender Regelungen verbunden sein sollte. Jedoch werden auch weiterhin neue zusäztliche Regelungen erforderlich sein, da sich das Unfallgeschehen und die Fahrzeugtechnologie weiterentwickeln und ändern werden. Diese sollten von Beginn an die Möglichkeiten des virtuellen Testens nutzen, insbesondere bei Testverfahren für neue Technologien, z.B. aktiver Fahrzeugsicherheitssysteme. Hier bieten virtuelle Testverfahren nicht nur eine Kosten- oder Zeitersparnis, sondern ermöglichen teilweise erst die sinnvolle Abprüfung von neuen Sicherheitssystemen, die mit aktuellen auf Hardware-Test basierenden Verfahren überhaupt nicht möglich wären.
According to the German road traffic regulations children up to the age of 12 or a height below 150 cm have to use approved and appropriate child restraint systems (CRS). CRS must be approved according to UN-ECE Regulation No. 44. The regulation classifies CRS in 5 weight categories. The upper weight group is approved for children from 22 to 36 kg. However, studies show that already today many children weigh more than 36 kg although they have not reached a height of 150 cm. Therefore, no ECE R44 approved CRS is available for these overweight children. In conclusion, today's sizes and weights of children are no longer represented by the current version of the ECE R44. The heaviest used dummy (P10) weighs just 32.6 kg and has a height of 137.9 cm. Statistical data of German children show that already 5% of the children at a height of 137.9 cm have a weight above 45.3 kg. Regarding children at a height of 145 cm, the 95th percentile limit is at a weight of 53.3 kg. Based on these data 4 dummies with different heights and weights were defined and produced. Two of them are overweight. Up to now, there is no experience how current child restraint systems perform in a car crash if they are used by children with a weight above 36 kg and a height smaller than 150 cm. In the future, different child restraint systems will be tested with respect to the ECE R44 regulation using these overweight dummies.
The use of proper child restraint systems (CRS) is mandatory for children travelling in cars in most countries of the world. The analysis of the quantity of restrained children shows that more than 90% of the children in Germany are restrained. Looking at the quality of the protection, a large discrepancy between restrained and well protected children can be seen. Two out of three children in Germany are not properly restrained. In addition, considerable difference exists with respect to the technical performance of CRS. For that reason investigations and optimisations on two different topics are necessary: The technical improvement of CRS and the ease of use of CRS. Consideration of the knowledge gained by the comparison of different CRS in crash tests would lead to some improvements of the CRS. But improvement of child safety is not only a technical issue. People should use CRS in the correct way. Misuse and incorrect handling could lead to less safety than correct usage of a poor CRS. For that reason new technical issues are necessary to improve the child safety AND the ease of use. Only the combination of both parts can significantly increase child safety. For the assessment of the safety level of common CRS, frontal and lateral sled tests simulating different severity levels were conducted comparing pairs of CRS which were felt to be good and CRS which were felt to be poor. The safety of some CRS is currently at a high level. All well known products were not damaged in the performed tests. The performance of non-branded CRS was mostly worse than that of the well known products. Although the branded child restraint systems already show a high safety level it is still possible to further improve their technical performance as demonstrated with a baby shell and a harness type CRS.
Proposal for a test procedure of assistance systems regarding preventive pedestrian protection
(2011)
This paper is showing a proposal for a test procedure regarding preventive pedestrian protection based on accident analysis. Over the past years pedestrian protection has become an increasing importance also during the development phase of new vehicles. After a phase of focusing on secondary safety, there are current activities to detect a possible collision by assistance systems. Such systems have the task to inform the driver and/or automatically activate the brakes. How practical is such a system? In which kind of traffic situations will it work? How is it possible to check the effectiveness of such a system? To test the effectiveness, currently there are no generally approved identifiable procedures. It is reasonable that such a test should be based on real accidents. The test procedure should be designed to test all systems, independent of the system- working principle. The vFSS group (advanced Forward-looking Safety Systems) was founded to develop a proposal for a technology independent test procedure, which reflects the real accident situation. This contribution is showing the results of vFSS. The developed test procedure focuses on accidents between passenger cars and pedestrians. The results are based on analysis results of in-depth databases of GIDAS, German insurers and DEKRA and added by analysis of national and international statistics. The in-depth analysis includes many pre-crash situations with several influencing factors. The factors are e. g. speed of the car, speed of the pedestrian, moving direction and a possible obscuration of the pedestrian by an object. The results comprise also the different situations of adults and children. Furthermore, they include details regarding influence of the lighting conditions (daylight or night) especially with respect to the accident consequences. In fact, more accidents happen at daylight, but fatal accidents are more often at night. A clustering of parameter combinations was found which represents typical accident scenarios. There are six typical accident scenarios which were merged in four test scenarios. The test scenarios are varying the starting position of the pedestrian, the pedestrian size (adult or child) and the speed of the pedestrian, whereas the speed of the car will not be varied. To ensure the independency from used sensing technologies it is necessary to use a suitable dummy. For example, if sensors are based on infrared, the dummy should emit the temperature of a human being. The test procedure will identify the collision speed as the key parameter for assessing the effectiveness of the tested system. The collision speed is defined as the reduction between initial test speed of the car and impact speed. The assessment of the speed reduction value regarding the safety benefit, however, will be part of a separate procedure.
To improve vehicle safety in frontal collisions, the crash compatibility between the colliding vehicles is crucial. Compatibility aims to improve both the self and partner protection properties of vehicles. Although compatibility has received worldwide attention for many years, no final assessment approach has been defined. Within the Frontal Impact and Compatibility Assessment Research (FIMCAR) project, different frontal impact test procedures (offset deformable barrier [ODB] test as currently used for Economic Commission for Europe [ECE] R94, progressive deformable barrier test as proposed by France for a new ECE regulation, moveable deformable barrier test as discussed worldwide, full-width rigid barrier test as used in Federal Motor Vehicle Safety Standard [FMVSS] 208, and full-width deformable barrier test) were analyzed regarding their potential for future frontal impact legislation. The research activities focused on car-to-car frontal impact accidents based on accident investigations involving newer cars. Test procedures were developed with both a crash test program and numerical simulations. The proposal from FIMCAR is to use a full-width test procedure with a deformable element and compatibility metrics in combination with the current offset test as a frontal impact assessment approach that also addresses compatibility. By adding a full-width test to the current ODB test it is possible to better address the issues of structural misalignment and injuries resulting from high acceleration accidents as observed in the current fleet. The estimated benefit ranges from a 5 to 12 percent reduction of fatalities and serious injuries resulting from frontal impact accidents. By using a deformable element in the full-width test, the test conditions are more representative of real-world situations with respect to acceleration pulse, restraint system triggering time, and deformation pattern of the front structure. The test results are therefore expected to better represent real-world performance of the tested car. Furthermore, the assessment of the structural alignment is more robust than in the rigid wall test.
A legform impactor with biofidelic characteristics (FlexPLI) which is being developed by the Japanese Automobile Research Institute (JARI) is being considered as a test tool for legislation within a proposed Global Technical Regulation on pedestrian protection (UNECE, 2006) and therefore being evaluated by the Technical Evaluation Group (TEG) of GRSP. In previous built levels it already showed good test results on real cars as well as under idealised test conditions but also revealed further need for improvement. A research study at the Federal Highway Research Institute (BASt) deals with the question on how leg injury risks of modern car fronts can be revealed, reflected and assessed by the FlexPLI and how the impactor can be used and implemented as a legislative instrument for the type approval of cars according to current and future legislations on pedestrian protection. The latest impactor built level (GTα ) is being evaluated by a general review and assessment of the certification procedure, the knee joint biofidelity and the currently proposed injury criteria. Furthermore, the usability, robustness and durability as a test tool for legislation is examined and an assessment of leg injuries is made by a series of tests with the FlexPLI on real cars with modern car front shapes as well as under idealised test conditions. Finally, a comparison is made between the FlexPLI and the current european legislation tool, the legform impactor according to EEVC WG 17.
A means of assessing the passive safety of automobiles is a desirable instrument for legislative bodies, the automobile industry, and the consumer. As opposed to the dominating motor vehicle assessment criteria, such as engine power, spaciousness, aerodynamics and consumption, there are no clear and generally accepted criteria for assessing the passive safety of cars. The proposed method of assessment combines the results of experimental safety tests, carried out according to existing legally prescribed or currently discussed testing conditions, and a biomechanical validation of the loading values determined in the test. This evaluation is carried out with the aid of risk functions which are specified for individual parts of the body by correlating the results of accident analysis with those obtained by computer simulation. The degree of conformance to the respective protection criterion thus deduced is then weighted with factors which take into account the frequency of occurrence and the severity of the accident on the basis of resulting costs. Each of the test series includes at least two frontal and one lateral crash test against a deformable barrier. The computer-aided analysis and evaluation of the simulation results enables a vehicle-specific overall safety index as well as partial and individual safety values to be determined and plotted graphically. The passive safety provided by the respective vehicle under test can be defined for specific seating positions, special types of accident, or for individual endangered parts of the body.
With the present brake signal pattern the traffic behind only receives the information that the brakes are applied, however, the drivers have no information about the intensity of the braking maneuver. In this report it is examined on the basis of a study of the literature, how the rear signal pattern could be optimized for a special representation of emergency braking maneuvers. In principle there are two suitable possibilities to reduce the driver reaction time: - An increase in the area and luminance of the brake lights intuitively provide the drivers following with an impression of approaching the vehicle in front , - Flashing lights are particularly suited to attract the attention of the driver following to the deceleration of the vehicle ahead , - The following advancement is recommended as an optimization of the rear signal pattern: When the brake assistant or ABS actuates or at a vehicle deceleration rate greater than 7 m/s-², the emergency braking maneuver is signaled by flashing of the third high-mounted brake light at a rate of 3-5 Hz. As an option, the area and luminance of the two lower brake lights could be increased in addition. These measures require changes to ECE Regulations No. 7 and No. 48 as well as to the Vienna Convention. The purpose of the described solution is to reduce the number or severity of rear-end accidents.