83 Unfall und Mensch
Filtern
Erscheinungsjahr
Dokumenttyp
Volltext vorhanden
- nein (178) (entfernen)
Schlagworte
- Safety (63)
- Sicherheit (63)
- Driver (46)
- Fahrer (46)
- Behaviour (43)
- Deutschland (43)
- Germany (43)
- Verhalten (43)
- Accident (39)
- Unfall (39)
Motorcycling is a fascinating kind of transportation. While the riders' direct exposure to the environment and the unique driving dynamics are essential to this fascination, they both cause a risk potential which is several times higher than when driving a car. This chapter gives a detailed introduction to the fundamentals of motorcycle dynamics and shows how its peculiarities and limitations place high demands on the layout of dynamics control systems, especially when cornering. The basic principles of dynamic stabilization and directional control are addressed along with four characteristic modes of instability (capsize, wobble, weave, and kickback). Special attention is given to the challenges of braking (brake force distribution, dynamic over-braking, kinematic instability, and brake steer torque induced righting behavior). It is explained how these challenges are addressed by state-of-the-art brake, traction, and suspension control systems in terms of system layout and principles of function. It is illustrated how the integration of additional sensors " essentially roll angle assessment " enhances the cornering performance in all three categories, fostering a trend to higher system integration levels. An outlook on potential future control systems shows exemplarily how the undesired righting behavior when braking in curves can be controlled, e.g., by means of a so-called brake steer torque avoidance mechanism (BSTAM), forming the basis for predictive brake assist (PBA) or even autonomous emergency braking (AEB). Finally, the very limited potential of brake and chassis control to stabilize yaw and roll motion during unbraked cornering accidents is regarded, closing with a promising glance at roll stabilization through a pair of gimbaled gyroscopes.
In line with the new definition introduced by the European Commission (EC), the number of seriously injured road casualties in Germany for 2014 is assessed in this study. The number of MAIS3+ casualties is estimated by two different methodological approaches. The first approach is based on data from the German Inâ€Depth Accident Study (GIDAS), which is closely related to the German Road Traffic Accident Statistics. The second approach is based on data from the German TraumaRegister DGU-® (TRâ€DGU), which includes many more hospitals but not all MAIS3+ injuries.
Cycling and designing for cyclist in Germany: an overview of road safety, research and guidelines
(2016)
Cycling is considered a social, eco-friendly, pollution-free, low noise and healthy activity and mode of transportation. There are currently around 67 million bicycles in Germany. This number is expected to increase in the near future with greater use of electromotive assisted bicycles. Regarding the expected increase, there should be additional attention given to road traffic accidents involving cyclists. In 2014, 396 cyclists were killed in road accidents in Germany, which is 12 % of all road fatalities. Also in 2014, Germany reported over 78,000 injuries to cyclists. The majority of the fatalities (about 58 %) and 83 % of the serious injuries to cyclists occurred in urban areas. This paper will examine three aspects concerning cyclists. First, the paper will show the main current developments, for example the National Cycling Plan 2020, the effects of the road safety programme and provide an analysis of the German national accident statistics. Second, the paper will give an overview of the regulations, guidelines for road traffic and designing of cycling facilities. Lastly, this study will detail the current and completed research in Germany addressing cyclist. For example, the paper will discuss the topic "Accidents between Turning-off Trucks and Cyclists" Accidents between right turning trucks and straight riding cyclists often show massive consequences. Accident severity is much higher than in other accidents. The situation is critical especially due to the fact that, in spite of the six mirrors that are mandatory for ensuring a minimum field of sight for the truck drivers, cyclists in some situations cannot be seen or are not seen by the driver. Either the cyclist is overlooked or is in a blind spot area that results from the turning manoeuvre of the truck. At present driver assistance systems are discussed that can support the driver in the turning situation by giving a warning when cyclists are riding parallel to the truck just before or in the turning manoeuvre. The paper will describe the requirements for turning assist systems for trucks. The outcome of the study is an overview of the accident situation between right turning trucks and straight driving cyclists in Germany as well as a corresponding test procedure for driver assistance systems. Below are several other projects which will be investigated, too: Accident Risk and Acceptance of Traffic-Rules by Cyclists ; Safety Improvement in Terms of Using Bicycle Paths in the Opposite Direction ; Cycling in Mixed-Traffic ; Observation of Pedal Electric Cycles Riders to Identify Safety Concerns. These three aspects will provide the current situation on the topic of cyclist safety in Germany.
Von 2001 bis 2014 hat die Zahl der bei Unfällen mit Personenschaden Beteiligten unter Alkoholeinfluss um 47% abgenommen. Im gleichen Umfang (47%) hat sich auch die Anzahl der Alkoholunfälle mit Personenschaden reduziert. Nach wie vor tritt bei Pkw-Fahrern Alkohol als Unfallursache am häufigsten in der Altersgruppe der 21- bis 24-jährigen Männer auf, mit Abstand gefolgt von den Gruppen der männlichen 25- bis 34-jährigen Fahrer und der 18- bis 20-Jährigen. Die Anzahl der an Unfällen mit Personenschaden beteiligten alkoholisierten männlichen Pkw-Fahrer fällt etwa 6-mal so hoch aus wie die der weiblichen. Alkoholunfälle mit Personenschaden ereignen sich am häufigsten in den Abend- und frühen Morgenstunden und insbesondere in den Wochenendnächten. Unter den Verursachern dieser nächtlichen Freizeitunfälle sind junge Erwachsene überproportional häufig vertreten. Seit dem 1. April 2001 gilt in Deutschland eine 0,5-Promille-Grenze für Kraftfahrer. Im Januar 2005 wurde eine Null-Promille-Grenze für Gefahrguttransporte eingeführt. Am 1. August 2007 ist das Alkoholverbot für Fahranfänger in Kraft getreten. Die Null-Promille-Grenze gilt für alle jungen Fahrer unter 21 Jahren sowie für Fahranfänger, die sich noch in der zweijährigen Probezeit befinden, unabhängig von ihrem Alter. Die Gefährdung der Verkehrssicherheit durch drogenbeeinflusste Kraftfahrer hat in den letzten Jahren an Bedeutung gewonnen. Daher wurden Ausbildungsmaßnahmen für die Polizei zur besseren Erkennung einer Drogenwirkung bei Kraftfahrern eingeführt. In den Jahren 1998 und 1999 traten darüber hinaus verschiedene gesetzliche Neuregelungen in Kraft. Vor diesem Hintergrund ist die Dokumentation der Unfallursache "andere berauschende Mittel" deutlich angestiegen, liegt aber immer noch um ein Vielfaches niedriger als die Unfallursache Alkohol.
There is considerable evidence for the negative effects of driver distraction on road safety. In many experimental studies, drivers have been primarily viewed as passive receivers of distraction. Thus, there is a lack of research on the mediating role of their self-regulatory behavior. The aim of the current study was to compare drivers' performance when engaged in a system-paced secondary task with a self-paced version of this task and how both differed from baseline driving performance without distraction. Thirty-nine participants drove in a simulator while performing a secondary visual"manual task. One group of drivers had to work on this task in predefined situations under time pressure, whereas the other group was free to decide when to work on the secondary task (self-regulation group). Drivers' performance (e.g., lateral and longitudinal control, brake reaction times) was also compared with a baseline condition without any secondary task. For the system-paced secondary task, distraction was associated with high decrements in driving performance (especially in keeping the lateral position). No effects were found for the number of collisions, probably because of the lower driving speeds while distracted (compensatory behavior). For the self-regulation group, only small impairments in driving performance were found. Drivers engaged less in the secondary task during foreseeable demanding or critical driving situations. Overall, drivers in the self-regulation group were able to anticipate the demands of different traffic situations and to adapt their engagement in the secondary task, so that only small impairments in driving performance occurred. Because in real traffic drivers are mostly free to decide when to engage in secondary tasks, it can be concluded that self-regulation should be considered in driver distraction research to ensure ecological validity.
Ab einer Konzentration des Cannabiswirkstoffes Tetrahydrocannabinol (THC) von 1,0 ng/ml im Blutserum kann das Vorliegen verkehrsmedizinisch relevanter Leistungsdefizite nicht ausgeschlossen werden; daher gilt ab diesem Wert der objektive Tatbestand des -§ 24a (2) StVG als erfüllt. In Abhängigkeit von der Konsumfrequenz kann es aber sein, dass eine derartige Konzentration auf einen Konsum zurückgeht, der mehr als 24 Stunden vor der Fahrt stattgefunden hat. Da in diesem Fall sicher keine relevante Cannabiswirkung mehr vorliegt, sind THC-Konzentrationen, die nur wenig oberhalb von 1,0 ng/ml im Blutserum liegen, nicht als Beweis für eine mangelnde Trennung von Konsum und Fahren anzusehen, und ein Direktentzug der Fahrerlaubnis erscheint nicht ohne Weiteres gerechtfertigt. Die Grenzwertkommission hat vorgeschlagen, erst ab einer Blutserumkonzentration an THC von 3,0 ng/ml regelmäßig davon auszugehen, dass Konsum und Fahren nicht ausreichend getrennt wurden, was die Nichteignung zum Führen von Kraftfahrzeugen bedingt. Bei THC-Konzentrationen zwischen 1,0 und 3,0 ng/ml sollte die Fahreignung durch eine medizinisch-psychologische Untersuchung überprüft werden.
Erfolge der MPU-Reform
(2016)
Auf Basis der Empfehlung des Deutschen Verkehrsgerichtstags im Jahr 2010 entschied der Bundesverkehrsminister, dass zur Weiterentwicklung der Medizinisch-Psychologischen Untersuchung eine "MPU-Reform" erforderlich sei, mit deren Umsetzung anschließend die Bundesanstalt für Straßenwesen (BASt) beauftragt wurde. Über drei Jahre identifizierte die "Projektgruppe MPU-Reform" die relevanten Themen und bearbeitete sie wissenschaftlich-fachlich. Diese Arbeiten haben breit akzeptierte und praktisch umsetzbare Ergebnisse gebracht. Dargestellt wird, welcher Reformbedarf identifiziert und was bisher erreicht wurde. Angesprochen werden die Themen: bessere Informationen für Betroffene, Qualität in der MPU-Beratung und -Vorbereitung, bessere Abstimmung der Überarbeitung relevanter Regelwerke, wissenschaftliche Prüfung der eingesetzten Testverfahren zur Überprüfung psychophysischer Leistungsfunktionen und der Kurse zur Wiederherstellung der Fahreignung (Paragraf 70 Fahrerlaubnisverordnung), Katalog mit einheitlichen Fragestellungen für MPU und ärztliche Gutachten, Frage der Einrichtung einer "Beschwerdestelle", sowie Erhöhung der Transparenz durch Tonaufzeichnungen. Mit weiteren wissenschaftlich basierten Verbesserungen ist auch zukünftig zu rechnen.
One main objective of the EU-Project SENIORS is to provide improved methods to assess thoracic injury risk to elderly occupants. In contribution to this task paired simulations with a THOR dummy model and human body model will be used to develop improved thoracic injury risk functions. The simulation results can provide data for injury criteria development in chest loading conditions that are underrepresented in PMHS test data sets that currently proposed risk functions are based on. To support this approach a new simplified generic but representative sled test fixture and CAE model for testing and simulation were developed. The parameter definition and evaluation of this sled test fixture and model is presented in this paper. The justification and definition of requirements for this test set-up was based on experience from earlier studies. Simple test fixtures like the gold standard sled fixture are easy to build and also to model in CAE, but provide too severe belt-only loading. On the other hand a vehicle buck including production components like airbag and seat is more representative, but difficult to model and to be replicated at a different laboratory. Furthermore some components might not be available for physical tests at later stage. The basis of the SENIORS generic sled test set-up is the gold standard fixture with a cable seat back and foot rest. No knee restraint was used. The seat pan design was modified including a seat ramp. The three-point belt system had a generic adjustable load limiter. A pre-inflated driver airbag assembly was developed for the test fixture. Results of THOR test and simulations in different configurations will be presented. The configurations include different deceleration pulses. Further parameter variations are related to the restraint system including belt geometry and load limiter levels. Additionally different settings of the generic airbag were evaluated. The test set-up was evaluated and optimized in tests with the THOR-M dummy in different test configurations. Belt restraint parameters like D-ring position and load limiter setting were modified to provide moderate chest loading to the occupant. This resulted in dummy readings more representative of the loading in a contemporary vehicle than most available PMHS sled tests reported in the literature. However, to achieve a loading configuration that exposes the occupant to even less severe loading comparable to modern vehicle restraints it might be necessary to further modify the test set-up. The new generic sled test set-up and a corresponding CAE model were developed and applied in tests and simulations with THOR. Within the SENIORS project with this test set-up also volunteer and PMHS as well as HBM simulations are performed, which will be reported in other publications. The test environment can contribute in future studies to the assessment of existing and new frontal impact dummies as well as dummy improvements and related instrumentation. The test set-up and model could also serve as a new standard test environment for PMHS and volunteer tests as well as HBM simulations.
Europe has benefited from a decreasing number of road traffic fatalities. However, the proportion of older road users increases steadily. In an ageing society, the SENIORS project aims to improve the safe mobility of older road users by determining appropriate requirements towards passive vehicle safety systems. Therefore, the characteristics of road traffic crashes involving the elderly people need to be understood. This paper focuses on car occupants and pedestrians or cyclists in crashes with modern passenger cars. Ten crash databases and four hospital statistics from Europe have been analysed to answer the questions on which body regions are most frequently and severely injured in the elderly, and specific injuries sustained by always comparing older (65 years and above) with midâ€aged road users (25â€64 years). It was found that the body region thorax is of particularly high importance for the older car occupant with injury severities of AIS2 or AIS3+, where as the lower extremities, head and the thorax need to be considered for older pedestrians and cyclists. Further, injury risk functions were provided. The hospital data analysis showed less difference between the age groups. The linkage between crash and hospital data could only be made on a general level as their inclusion criteria were quite different.
Accidents between right turning trucks and straight driving cyclists often show massive consequences. Accident severity in terms of seriously or fatally injured cyclists that are involved is much higher than in accidents of other traffic participants in other situations. It seems clear that adding additional mirrors will very likely not improve the situation. At ESV 2015, a methodology to derive test procedures and first test cases as well as requirements for a driver assist system to address blind spot accidents has been presented. However, it was unclear if and how testing of these cases is feasible, to what extent characteristics of different truck concepts (e.g. articulated vehicles, rigid vehicles) influence the test conduction and outcome, and what tolerances should be selected for the different variables. This work is important for the acceptance of a draft regulation in the UN working group on general safety. In the meantime, three test series using a single tractor vehicle, a tractor-semitrailer combination and a rigid vehicle have been conducted. The test tools (e.g. surrogate devices) have been refined. A fully crashable, commercially available bicycle dummy has been tested. If used correct, this dummy does follow a straight line quite precisely and it does not cause any damage to the truck under test in case of accidental impact. The dummy specifications are freely available. During testing, the different vehicle categories resulted in different trajectories being driven. Articulated vehicle combinations did first execute a turn into the opposite direction, and on the other hand, single tractor vehicles did behave comparable to passenger cars. A possible solution to take these behaviors into account is to require the vehicles to drive through a corridor that is narrow for a precise straight-driving phase and extends during the turn. Other investigated parameters are the dummy and vehicle speed tolerances. The results from this research make it possible to draft a regulation for a driver assistance system that helps to avoid blind spot accidents: test cases have been refined, their feasibility has been checked, and corridors for the vehicles and for important parameters (e.g. test speeds) have been set. The test procedure is applicable to all types of heavy goods vehicles. In combination with the accidentology (ESV 2015 paper), the work provides the basis for a regulation for such an assistance system.