Filtern
Erscheinungsjahr
Dokumenttyp
- Buch (Monographie) (634)
- Konferenzveröffentlichung (405)
- Wissenschaftlicher Artikel (92)
- Bericht (38)
- Teil eines Buches (Kapitel) (14)
- Arbeitspapier (14)
Sprache
- Deutsch (859)
- Englisch (337)
- Mehrsprachig (1)
Schlagworte
- Deutschland (634)
- Germany (633)
- Forschungsbericht (461)
- Research report (459)
- Conference (331)
- Konferenz (327)
- Safety (243)
- Bewertung (242)
- Sicherheit (240)
- Accident (234)
Institut
- Sonstige (1197) (entfernen)
Im Forschungsvorhaben wurde eine vergleichende Analyse der Baulastträgerkosten von Einhausungsbauwerken und Tunneln in offener Bauweise über den Lebenszyklus durchgeführt. Betrachtet wurden die Einhausungsarten oben offene Einhausungen, seitlich offene Einhausungen (Galerien) und geschlossene Einhausungen mit Verglasungen im Decken- und/oder Wandbereich. Der Analyse wurden mittlere Kostensätze für die Erhaltung (Erneuerung und Unterhaltung) der Bauwerke zugrundegelegt, die aus vorliegenden Objektdaten von Einhausungen und Tunneln gewonnen wurden. Die Gegenüberstellung der Kosten erfolgte für fiktive Gegen- und Richtungsverkehrsbauwerke mit einer Länge von 100 bis 6.000 Metern. Die bauliche Gestaltung sowie die betriebs- und sicherheitstechnische Ausstattung der Einhausungen wurden aus den Ergebnissen einer parallel durchgeführten Risikoanalyse (FE 15.492/2010/FRB) abgeleitet. Ziel der Gegenüberstellung war insbesondere die Ermittlung des Kosteneinflusses der Beleuchtungs- und Lüftungsauslegung. Als Vergleichsgröße wurden nach dem Modell der Ablösebeträge-Berechnungsverordnung (ABBV) kapitalisierte Erhaltungskosten verwendet. Im Ergebnis zeigte sich, dass alle Einhausungsarten mit geringeren Kosten als nach RABT 2006 ausgestattete Vergleichstunnel verbunden sind. In Abhängigkeit von Bauwerkslänge und Betriebsform ergaben sich für seitlich offene Einhausungen um 35 bis 45 %, für oben offene Einhausungen um 15 bis 40 % und für geschlossene Einhausungen um 10 bis 20 % niedrigere Erhaltungskosten. Auf Grundlage der ermittelten Kostensätze und dem Modell der ABBV wurde ein Softwaretool erstellt, mit dem die verschiedenen Einhausungsarten einem Vergleichstunnel gegenübergestellt werden können und das die zu erwartenden Kostendifferenzen ausgibt. Basierend auf den Ergebnissen wurden Standardisierungskonzepte für das Regelwerk erarbeitet, die unter Beibehaltung des Sicherheitsniveaus nach RABT 2006 eine wirtschaftlich optimierte Ausstattung von Einhausungen ermöglichen sollen.
T. DÜNCHHEIM erörtert in seinem Einführungsvortrag zu "Die Stellung der Gemeinden im Straßenrecht" die kommunalen Gestaltungsspielräume hinsichtlich ihres Satzungsrechts, das sich auf -§ 19 StrWG NRW stützen lässt. Er schildert die Auswirkungen dieser Gestaltung auf das Straßen- und Straßenverkehrsrecht, die letztlich Ausfluss der gemeindlichen Selbstverwaltungsgarantie sind. Dabei problematisiert er die Abgrenzung zwischen straßenrechtlichem Gemeingebrauch und Sondernutzung sowie die Bedeutung der rechtlichen Ausgestaltung des Straßen- und Straßenverkehrsrechts. Hierbei wird die Anwendung des -§ 45 StVO durch die Gemeinden einer kritischen Analyse unterzogen. A. NETTER schildert in seinem Beitrag "Aktuelle Rechtsfragen der Ortsdurchfahrten" die Gremienstruktur im Straßenwesen und den Einfluss des Europarechts, des Bundes- und Landesstraßenrechts sowie den Ortsdurchfahrtenrichtlinien auf das Straßenwesen. Er stellt dabei die Folgen der Aufhebung der Radwegbenutzungspflicht sowie die aus der Straßenbaulast folgende Entwässerungsverpflichtung der Straßenbaulastträger und ihre Umsetzung in den Gemeinden dar. U. WEGNER berichtet in ihrem Beitrag "Aktuelle Entwicklungen des Verbandsklagerechts" über die Auswirkungen europäischer Richtlinien auf das Umweltrecht. In diesem Zusammenhang wird eine wegweisende Entscheidung des BVerwG erörtert, welche die direkte Anwendung des Art. 9 Abs. 3 AK zum Gegenstand hat. Trotz der Einführung einer bundesrechtlichen Verbandsklage in -§ 64 BNatSchG sei das Problem der Wahrung von Allgemeininteressen nicht gelöst, da diese Norm die Interessen des Umweltschutzes nicht hinreichend zu schützen vermöge. Der Beitrag "Inanspruchnahme öffentlicher Wege durch TK-Unternehmen" von U. STELKENS, stellt eine differenzierte Auseinandersetzung mit dem TKG-Wegerecht dar. Er konstatiert, dass die Bestimmungen des TKG im Wesentlichen auf den Normen des Telegraphenwegegesetz (TWG) basieren. Daher bestehen Spannungsverhältnisse und Reibungsflächen zwischen den verschiedenen Abschnitten des TKG, da das TKG und das TWG unterschiedliche Ziele verfolgen. Beispielsweise seien die -§ 77a bis -§ 77e TKG nicht auf die -§ 68 bis -§ 77 TKG abgestimmt worden. Der abschließende Beitrag "Fachplanerische Auswirkungen des Umweltschadensgesetzes" von M. PETERSEN widmet sich der Frage, ob und welche Auswirkungen das Umweltschadensgesetz auf das Fachplanungsrecht hat. Zunächst wird allgemein herausgearbeitet, dass das Umweltschadensgesetz nicht Schadensersatz- oder Ausgleichsleistungen eines geschädigten Dritten bezweckt; vielmehr sollen Umweltschäden vermieden und die Wiederherstellung geschädigter Umweltgüter erreicht werden. Die Frage, ob und inwieweit das Umweltschadensgesetz Auswirkungen auf das Fachplanungsrecht hat, hängt davon ab, ob die Haftungstatbestände des -§ 3 Abs. 1 USchadG einschlägig sind.
Unfälle im Straßenverkehr sind in aller Regel Konsequenzen normalen Fahrverhaltens, das an eine bestimmte Situation nicht angepasst war und daher zum Unfall beigetragen hat. Zur Klassifikation dieses mutmaßlich fehlerbehafteten Verhaltens wurde im hier berichteten Projekt eine Taxonomie entwickelt. Sie dient der Klassifizierung von Fahrerfehlverhalten und integriert Aspekte des menschlichen Informationsverarbeitungsprozesses sowie die drei Fehlertypen von RASMUSSEN (1983). Als Bestimmungsstücke beinhaltet die Taxonomie Fehlertypen (regel-/wissens-/fertigkeitsbasiert) und Entscheidungsknoten mit Fragen, deren Beantwortung den Analysten zum jeweiligen Fehler führt. Zusammengefasst bietet die erarbeitete Taxonomie eine breite Anwendbarkeit für die Klassifikation von Fahrfehlern und fehlerfreiem Verhalten bei Manövern, kritischen Situationen bis hin zu Beinaheunfällen oder Unfällen, z. B. zur Harmonisierung der (Video-)Auswertung von FOT- und NDS-Datensätzen oder für In-Depth-Unfallerhebungen. Die Taxonomie wird komplementiert durch eine Übersicht über Fehlervorläuferbedingungen, die im Sinne von Genotypen (HOLLNAGEL 1998) in ihrer jeweiligen Ausprägung auslösende und begünstigende Bedingungen für Fehler, Beinaheunfälle und Unfälle darstellen. Die Übersicht ist als erweiterbares strukturierendes Dokument zu sehen, welches je nach wissenschaftlichen Erkenntnissen verändert werden kann. Gemeinsam mit der Taxonomie bildet sie die Basis für die Ableitung von Fahrerassistenzbedarf und andere Maßnahmen, zur Generierung von Hypothesen und zur strukturierten Sammlung von Studienergebnissen. Der vorliegende Bericht adressiert die FOT- und NDS-Community sowie allgemein verkehrspsychologisch-wissenschaftlich Interessierte. In acht Kapiteln widmet er sich den Arbeitsschritten und Ergebnissen der Taxonomieentwicklung.
When the EEVC proposed the full-scale side impact test procedure, it recommended that consideration should be given to an interior headform test in addition. This was to evaluate areas of contact not assessed by the dummy. EEVC Working Group 13 has been researching the parameters of a possible European headform test procedure in four phases. Earlier stages of the research have been presented at previous ESV conferences. The conclusions from these have suggested that the US free motion headform should be used in any European test procedure and that it should be a free flight test, not guided. This research has now culminated in proposals for a European test procedure. This paper presents the proposed EEVC side impact interior headform test procedure, giving the rationale for the test and the first results from the validation phase of the test protocol.
The frontal crash is still an important contributor to deaths and serious injured resulting from road accidents in Europe. As the Hybrid-III dummy used in crash tests is over two decades old, the European Enhanced Vehicle-safety Committee is studying the potential for a new test device. Key is the availability of a well-defined set of requirements that identifies the minimum level of biofidelity required for an advanced frontal dummy. In this paper, a complete set of frontal impact biofidelity requirements, consisting of references , description of test conditions and corridors, is presented.
The Swedish National Road Administration (SNRA), the Japanese Automobile Research Institute (JARI) and the Federal Highway Research Institute (BASt) are co-operating in the International Harmonized Research Activities on Intelligent Transportation Systems (IHRA-ITS). Under this umbrella a joint study was conducted. The overall objective of this study was to contribute to the definition and validation of a "battery of tools" which enables a prediction and an assessment of changes in driver workload due to the use of in-vehicle information systems (IVIS) while driving. In this sense \"validation\" means to produce empirical evidence from which it can be concluded that these methods reliably discriminate between IVIS which differ in terms of relevant features of the HMI-design. Additionally these methods should also be sensitive to the task demands imposed on the driver by the traffic situation and their interactions with HMI-design. To achieve these goals experimental validation studies (on-road and in the simulator) were performed in Sweden, Germany and Japan. As a common element these studies focused on the secondary task methodology as an approach to the study of driver workload. In a joint German-Swedish on-road study the Peripheral Detection Task (PDT) was assessed with respect to its sensitivity to the complexity of traffic situations and effects of different types of navigation systems. Results show that the PDT performance of both the German and the Swedish subjects reflects the task demands of the traffic situations better than those of the IVIS. However, alternative explanations are possible which will be examined by further analyses. Results of this study are supplemented by the Japanese study where informational demands induced by various traffic situations were analysed by using a simple arithmetic task as a secondary task. Results of this study show that relatively large task demands can be expected even from simple traffic situations.
The European Enhanced Vehicle-safety Committee wants to promote the use of more biofidelic child dummies and biomechanical based tolerance limits in regulatory and consumer testing. This study has investigated the feasibility and potential impact of Q-dummies and new injury criteria for child restraint system assessment in frontal impact. European accident statistics have been reviewed for all ECE-R44 CRS groups. For frontal impact, injury measures are recommended for the head, neck, chest and abdomen. Priority of body segment protection depends on the ECE-R44 group. The Q-dummy family is able to reflect these injuries, because of its biofidelity performance and measurement capabilities for these body segments. Currently, the Q0, Q1, Q1.5, Q3 and Q6 are available representing children of 0, 1, 1.5, 3 and 6 years old. These Q-dummies cover almost all dummy weight groups as defined in ECE-R44. Q10, representing a 10 year-old child, is under development. New child dummy injury criteria are under discussion in EEVC WG12. Therefore, the ECE-R44 criteria are assessed by comparing the existing P-dummies and new Q-dummies in ECE-R44 frontal impact sled tests. In total 300 tests covering 30 CRSs of almost all existing child seat categories are performed by 11 European organizations. From this benchmark study, it is concluded that the performance of the Q-dummy family is good with respect to repeatability of the measurement signals and the durability of the dummies. Applying ECE-R44 criteria, the first impression is that results for P- and Q-dummy are similar. For child seat evaluation the potential merits of the Q-dummy family lie in the extra measurement possibilities of these dummies and in the more biofidelic response.
In the EC FP6 Integrated Project Advanced Protection Systems, APROSYS, the first WorldSID small female prototype was developed and evaluated by BASt, FTSS, INRETS, TRL and UPM-INSIA during 2006 and 2007. Results were presented at the ESV 2007 conference (Been et al., 2007). With the prototype dummy scoring a biofidelity rating higher than 6.7 out of 10 according to ISO/TR9790, the results were very promising. Also opportunities for further development were identified by the evaluation group. A revised prototype, Revision1, was subsequently developed in the 2007-2008 period to address comments from the evaluation group. The Revision1 dummy includes changes in the half arms and the suit (anthropometry and arm biomechanics), the thorax and abdomen ribs and sternum (rib durability), the abdomen/lumbar area and the lower legs (mass distribution). Also a two-dimensional chest deflection measurement system was developed to measure deflection in both lateral and anterior-posterior direction to improve oblique thorax loading sensitivity. Two Revision1 prototype dummies have now been evaluated by FTSS, TRL, UPM-INSIA and BASt. The updated prototype dummies were subjected to an extensive matrix of biomechanical tests, such as full body pendulum tests and lateral sled impact tests as specified by Wayne State University, Heidelberg University and Medical College of Wisconsin. The results indicated a significant improvement of dummy biofidelity. The overall dummy biofidelity in the ISO rating system has significantly improved from 6.7 to 7.6 on a scale between 0-10. The small female WorldSID has now obtained the same biofidelity rating as the WorldSID mid size male dummy. Also repeatability improved with respect to the prototype. In conclusion the recommended updates were all executed and all successfully contributed in achieving improved performance of the dummy.
Powered Two Wheelers (PTWs) accidents constitute one of the road safety problems in Europe. PTWs fatalities represent 22% at EU level in 2006, having increased during last years, representing an opposite trend compared to other road users" figures. In order to reduce these figures it is necessary to investigate the accident causation mechanisms from different points of view (e.g.: human factor, vehicle characteristics, influence of the environment, type of accident). SAFERIDER project ("Advanced telematics for enhancing the SAFEty and comfort of motorcycle RIDERs", under the European Commission "7th Framework Program") has investigated PTW accident mechanisms through literature review and statistical analyses of National and In-depth accident databases; detecting and describing all the possible PTW's accident configurations where the implementation of ADAS (Advanced Driver Assistance Systems) and IVIS (In-Vehicle Information Systems) could contribute to avoid an accident or mitigate its severity. DIANA, the Spanish in-depth database developed by CIDAUT, has been analyzed for that purpose. DIANA comprises of accident investigation teams, in close cooperation with police forces, medical services, forensic surgeons, garages and scrap yards. An important innovation is the fact that before injured people arrive to hospitals, photographs and explanations about the possible accident injury mechanisms are sent to the respective hospitals (via 3G GPRS technology). By this, additional information to medical staff can be provided in order to predict in advance possible internal injuries and select the best medical treatment. This methodology is presented in this paper. On the other hand, the main results (corresponding to road, rider and PTW characteristics; pre and post-accident manoeuvres; road layout; rider behaviour; impact points; accident causations;...) from the analyses of the PTW accidents used for SAFERIDER are shown. Only accident types relevant to ADAS and IVIS devices have been considered.
A legform impactor with biofidelic characteristics (FlexPLI) which is being developed by the Japanese Automobile Research Institute (JARI) is being considered as a test tool for legislation within a proposed Global Technical Regulation on pedestrian protection (UNECE, 2006) and therefore being evaluated by the Technical Evaluation Group (TEG) of GRSP. In previous built levels it already showed good test results on real cars as well as under idealised test conditions but also revealed further need for improvement. A research study at the Federal Highway Research Institute (BASt) deals with the question on how leg injury risks of modern car fronts can be revealed, reflected and assessed by the FlexPLI and how the impactor can be used and implemented as a legislative instrument for the type approval of cars according to current and future legislations on pedestrian protection. The latest impactor built level (GTα ) is being evaluated by a general review and assessment of the certification procedure, the knee joint biofidelity and the currently proposed injury criteria. Furthermore, the usability, robustness and durability as a test tool for legislation is examined and an assessment of leg injuries is made by a series of tests with the FlexPLI on real cars with modern car front shapes as well as under idealised test conditions. Finally, a comparison is made between the FlexPLI and the current european legislation tool, the legform impactor according to EEVC WG 17.