Filtern
Erscheinungsjahr
Dokumenttyp
- Wissenschaftlicher Artikel (20) (entfernen)
Schlagworte
- Injury (20) (entfernen)
Institut
At the end of each year, the German Federal Highway Research Institute (BASt) publishes the road safety balance of the closing year. They describe the development of accident and casualty numbers disaggregated by road user types, age groups, type of road and the consequences of the accidents. However, at the time of publishing, these series are only available for the first eight or nine months of the year. To make the balance for the whole year, the last three or four months are forecasted. The objective of this study was to improve the accuracy of these forecasts through structural time-series models that include effects of meteorological conditions. The results show that, compared to the earlier heuristic approach, root mean squared errors are reduced by up to 55% and only two out of the 27 different data series yield a modest rise of prediction errors. With the exception of four data series, prediction accuracies also clearly improve incorporating meteorological data in the analysis. We conclude that our approach provides a valid alternative to provide input to policy makers in Germany.
Unfälle zerstören Sachkapital und mindern die der Volkswirtschaft zur Verfügung stehende Arbeitskraft. Zur Entscheidungsunterstützung nutzt die Verkehrssicherheitspolitik in ökonomischen Analysen monetäre Wertansätze, welche sich auf die Folgen der Straßenverkehrsunfälle beziehen und deren Ausmaß quantifizieren. Durch die Bundesanstalt für Straßenwesen (BASt) werden jährlich auf der Grundlage eines Berechnungsmodells die Kosten ermittelt, die durch Straßenverkehrsunfälle entstehen. Um den Veränderungen der wirtschaftlichen Eingangsparameter und der Entwicklung des Wissensstands zur Bewertung von Unfallschäden gerecht zu werden, wurde dieses Modell im Rahmen eines Forschungsprojektes mit Bezug auf das Jahr 2005 überarbeitet und fortgeschrieben. Danach ergeben sich für das Jahr 2009 volkswirtschaftliche Kosten in Höhe von 30,5 Milliarden Euro durch Personen- und Sachschäden infolge von Straßenverkehrsunfällen in Deutschland. Gegenüber dem Basisjahr 2005 sind die Unfallkosten damit um circa 3 Prozent (= 960 Millionen Euro) gesunken.
Bedingt durch ihre Definition - mindestens 24-stündiger Klinikaufenthalt - umfasst die Kategorie der Schwerverletzten in der amtlichen Verkehrsunfallstatistik eine große Breite tatsächlicher Verletzungsschweregrade. Durch das hohe persönliche Leid sowie die bedeutsamen volkswirtschaftlichen Kosten sind innerhalb dieser Gruppe die Schwerstverletzten von besonderem Interesse. Es werden drei Studien der Bundesanstalt für Straßenwesen (BASt) vorgestellt, in denen auf Grundlage verschiedener Datenquellen Verletzungsmuster und Verletzungsschwere in Zusammenhang mit Parametern des Unfallgeschehens gebracht wurden. Zusammengefasst zeigt sich, dass (a) die Zahl der Schwerstverletzten sich in den letzten Jahren nicht in gleichem Maße reduziert hat, wie die Zahlen Schwerverletzter und Getöteter; (b) sich über verschiedene Datenquellen (GIDAS, TraumaRegister DGU, Rettungsdienst, Polizei) ähnliche Verletzungsmuster in Abhängigkeit der Verkehrsteilnahme zeigen; (c) durch die Verbindung von medizinischen Daten des TraumaRegisters mit Daten der Polizei gute Voraussetzungen für eine umfangreiche Erfassung Schwerstverletzter in Deutschland geschaffen werden könnten.
Im Jahr 2016 wird die Zahl der Unfälle mit Personenschaden sowie die Zahl der Verunglückten insgesamt geringfügig steigen. Die Zahl der im Straßenverkehr getöteten Personen wird jedoch nach Anstiegen in den beiden vergangenen Jahren 2016 wieder zurückgehen. Nach Schätzungen der Bundesanstalt fuer Straßenwesen (BASt) wird für die Zahl der im Straßenverkehr Getöteten im Jahr 2016 gegenüber 2015 ein Rückgang um circa 6% auf etwa 3.240 Getötete erwartet. Die Gesamtzahl der polizeilich erfassten Unfälle wird im Jahr 2016 um äber 3 % ansteigen. Mit gut 2,6 Millionen Unfällen erreicht die Zahl somit den höchsten Wert seit 1991. Bei der Zahl der Unfälle mit Personenschaden wird im Vergleich zu 2015 (305.659 Unfälle) ein weiterer Anstieg um knapp 1.000 Unfälle erwartet. Die Zahl der bei diesen Unfällen Verunglückten (verletzte and getötete Personen; 2015: 396.891) wird dabei ebenfalls um über 1.000 ansteigen, auf circa 398.000 Verunglückte im Jahr 2016. Dies wären jeweils die höchsten Werte seit 2009. Die Zahl der getöteten Motorradnutzer wird um über 100 beziehungsweise um circa 17 % zurückgehen. Die Gesamtzahl der getöteten Pkw-Insassen (2015:1.620) wird im Jahr 2016 um über 2 % sinken und damit etwa das Niveau von 2013/14 erreichen. Bei der Anzahl der getöteten Radfahrer (2015: 383 Getötete) wird erneut ein Rückgang um etwa 3 % erwartet. Die Zahl der getöteten Fussgänger im Straßenverkehr wird nach dem Anstieg im Vorjahr (2015: 537 Getötete; +2,7 %) dagegen wieder um knapp 4 % sinken. Bei den Alkoholunfällen mit Personenschaden (2015: 13.239) setzt sich der kontinuierlich rückläufige Trend fort. Für 2016 wird ein Rückgang auf etwa 13.000 Unfälle erwartet. Für die Gesamtfahrleistung der Kraftfahrzeuge wird im Jahr 2016 ein Anstieg um etwa 1,8 % erwartet. Auf Bundesautobahnen wird mit einem Anstieg um 2,5 % gerechnet.
Im Jahr 2015 wird in Deutschland sowohl die Zahl der Straßenverkehrsunfälle mit Personenschaden als auch die Zahl der Verunglückten insgesamt geringfügig zurückgehen. Die Anzahl der im Straßenverkehr Getöteten wird jedoch zum zweiten Mal in Folge ansteigen. Nach Schätzungen der Bundesanstalt für Straßenwesen (BASt) wird ein Anstieg um rund 2 % auf etwa 3.440 Getötete erwartet. Die Gesamtzahl der polizeilich erfassten Unfälle wird im Jahr 2014 dagegen erneut abnehmen und zwar um knapp 2 % auf gut 2,37 Millionen Unfälle (2013: 2.414.011). Bei der Zahl der Unfälle mit Personenschaden wird im Vergleich zu 2014 (302.435 Unfälle) ein leichter Rückgang um circa 0,5 % auf rund 301.000 Unfälle erwartet. Die Zahl der Verunglückten (verletzte und getötete Personen) wird dabei ebenfalls um knapp 0,5 % auf rund 391.000 Verunglückte im Jahr 2015 sinken. Bei der Zahl der Getöteten zeigen sich im aktuellen Jahr Anstiege bei fast allen Arten der Verkehrsteilnahme. Die Gesamtzahl der getöteten Pkw-Insassen wird um knapp 2 % ansteigen. Bei den getöteten Motorradnutzern wird ein Anstieg um etwa 7 % erwartet. Die Anzahl der getöteten Radfahrer wird um etwa 4 % sinken. Bei der Zahl der getöteten Fußgänger wird ein leichter Anstieg um knapp 4 % erwartet. Bei den Alkoholunfällen wird in diesem Jahr erneut ein Rückgang um etwa 600 Unfälle zu verzeichnen sein. Für die Gesamtfahrleistung der Kraftfahrzeuge wird im Jahr 2015 ein Anstieg um etwa 2,3 % erwartet. Auf Bundesautobahnen sowie auf den ausserörtlichen Bundesstraßen wird mit einem Anstieg der Fahrzeug-km um 2,5 % beziehungsweise 1 % gerechnet.
Autonomous Emergency Braking (AEB) systems for pedestrians have been predicted to offer substantial benefit. On this basis, consumer rating programmes, e.g. Euro NCAP, are developing rating schemes to encourage fitment of these systems. One of the questions that needs to be answered to do this fully, is to determine how the assessment of the speed reduction offered by the AEB is integrated with the current assessment of the passive safety for mitigation of pedestrian injury. Ideally, this should be done on a benefit related basis. The objective of this research was to develop a benefit based methodology for assessment of integrated pedestrian protection systems with pre-crash braking and passive safety components. A methodology has been developed which calculates the cost of pedestrian injury expected, assuming all pedestrians in the target population (i.e. pedestrians impacted by the front of a passenger car) are impacted by the car being assessed, taking into account the impact speed reduction offered by the car’s AEB (if fitted) and the passive safety protection offered by the car’s frontal structure. For rating purposes, this cost can be normalised by comparing it to the cost calculated for selected cars. The methodology uses the speed reductions measured in AEB tests to determine the speed at which each casualty in the target population will be impacted. The injury to each casualty is then calculated using the results from standard Euro NCAP pedestrian impactor tests and injury risk curves. This injury is converted into cost using ‘Harm’ type costs for the body regions tested. These costs are weighted and summed. Weighting factors were determined using accident data from Germany and GB and the results of a benefit analysis performed by the EU FP7 AsPeCSS project. This resulted in German and GB versions of the methodology. The methodology was used to assess cars with good, average and poor Euro NCAP pedestrian ratings, with and without a current AEB system fitted. It was found that the decrease in casualty injury cost achieved by fitting an AEB system was approximately equivalent to that achieved by increasing the passive safety rating from poor to average. Also, it was found that the assessment was influenced strongly by the level of head protection offered in the scuttle and windscreen area because this is where head impact occurs for a large proportion of casualties. The major limitation within the methodology is the assumption used implicitly during weighting. This is that the cost of casualty injuries to body areas, such as the thorax, not assessed by the headform and legform impactors, and other casualty injuries such as those caused by ground impact, are related linearly to the cost of casualty injuries assessed by the impactors. A methodology for assessment of integrated pedestrian protection systems was developed. This methodology is of interest to consumer rating programmes which wish to include assessment of these systems. It also raises the interesting issue if the head impact test area should be weighted to reflect better real-world benefit.
To improve vehicle safety in frontal collisions, the crash compatibility between the colliding vehicles is crucial. Compatibility aims to improve both the self and partner protection properties of vehicles. Although compatibility has received worldwide attention for many years, no final assessment approach has been defined. Within the Frontal Impact and Compatibility Assessment Research (FIMCAR) project, different frontal impact test procedures (offset deformable barrier [ODB] test as currently used for Economic Commission for Europe [ECE] R94, progressive deformable barrier test as proposed by France for a new ECE regulation, moveable deformable barrier test as discussed worldwide, full-width rigid barrier test as used in Federal Motor Vehicle Safety Standard [FMVSS] 208, and full-width deformable barrier test) were analyzed regarding their potential for future frontal impact legislation. The research activities focused on car-to-car frontal impact accidents based on accident investigations involving newer cars. Test procedures were developed with both a crash test program and numerical simulations. The proposal from FIMCAR is to use a full-width test procedure with a deformable element and compatibility metrics in combination with the current offset test as a frontal impact assessment approach that also addresses compatibility. By adding a full-width test to the current ODB test it is possible to better address the issues of structural misalignment and injuries resulting from high acceleration accidents as observed in the current fleet. The estimated benefit ranges from a 5 to 12 percent reduction of fatalities and serious injuries resulting from frontal impact accidents. By using a deformable element in the full-width test, the test conditions are more representative of real-world situations with respect to acceleration pulse, restraint system triggering time, and deformation pattern of the front structure. The test results are therefore expected to better represent real-world performance of the tested car. Furthermore, the assessment of the structural alignment is more robust than in the rigid wall test.
Trauma management (TM) covers two types of medical treatment: the initial one provided by Emergency Medical Services (EMS) and a further one provided by permanent medical facilities. There is a consensus in the professional literature that to reduce the severity and the number of road crash victims, the TM system should provide rapid and adequate initial care of injury, combined with sufficient further treatment at a hospital or trauma centre. Recognizing the important role of TM for reducing road crash injury outcome, it was decided, within the EU funded SafetyNet project, to develop road safety performance indicators (SPIs) which would characterize the level of TM systems" performance in European countries and enable country comparisons. The concept of TM SPIs was developed based on a literature study of performance indicators in TM, a survey of available practices in Europe and data availability examinations. A set of TM SPIs was introduced including 14 indicators which characterize five issues such as: availability of EMS stations; availability and composition of EMS medical staff; availability and composition of EMS transportation units; characteristics of the EMS response time, and availability of trauma beds in permanent medical facilities. Basic information on the TM systems was collected in close cooperation with the national expert group. A dataset with TM SPIs for 21 countries was created. It was demonstrated that the countries can be compared using selected TM SPIs. Moreover, a more general comparison of the TM systems' performance in the countries is possible, using multiple ranking and statistical weighting techniques. By both methods, final estimates were received enabling the recognition of groups of countries with similar levels of the TM system's performance. The results of various trials were consistent as to the recognition of countries with high or low level of the TM systems" performance, where in grouping countries with intermediate levels of the TM system's performance some differences were observed. The SafetyNet project's practice demonstrated that data collection for estimating TM SPIs is not an easy task but is realizable for the majority of countries. The TM SPIs" message is currently limited to the availability of trauma care services. Further development of the TM SPIs should focus on characteristics of actual treatment supplied, based on combined police and medical road crash related databases.
The United Nations Economic Commission for Europe Informal Group on GTR No. 7 Phase 2 are working to define a build level for the BioRID II rear impact (whiplash) crash test dummy that ensures repeatable and reproducible performance in a test procedure that has been proposed for future legislation. This includes the specification of dummy hardware, as well as the development of comprehensive certification procedures for the dummy. This study evaluated whether the dummy build level and certification procedures deliver the desired level of repeatability and reproducibility. A custom-designed laboratory seat was made using the seat base, back, and head restraint from a production car seat to ensure a representative interface with the dummy. The seat back was reinforced for use in multiple tests and the recliner mechanism was replaced by an external spring-damper mechanism. A total of 65 tests were performed with 6 BioRID IIg dummies using the draft GTR No.7 sled pulse and seating procedure. All dummies were subject to the build, maintenance, and certification procedures defined by the Informal Group. The test condition was highly repeatable, with a very repeatable pulse, a well-controlled seat back response, and minimal observed degradation of seat foams. The results showed qualitatively reasonable repeatability and reproducibility for the upper torso and head accelerations, as well as for T1 Fx and upper neck Fx. However, reproducibility was not acceptable for T1 and upper neck Fz or for T1 and upper neck My. The Informal Group has not selected injury or seat assessment criteria for use with BioRID II, so it is not known whether these channels would be used in the regulation. However, the ramping-up behavior of the dummy showed poor reproducibility, which would be expected to affect the reproducibility of dummy measurements in general. Pelvis and spine characteristics were found to significantly influence the dummy measurements for which poor reproducibility was observed. It was also observed that the primary neck response in these tests was flexion, not extension. This correlates well with recent findings from Japan and the United States showing a correlation between neck flexion and injury in accident replication simulations and postmortem human subjects (PMHS) studies, respectively. The present certification tests may not adequately control front cervical spine bumper characteristics, which are important for neck flexion response. The certification sled test also does not include the pelvis and so cannot be used to control pelvis response and does not substantially load the lumbar bumpers and so does not control these parts of the dummy. The stiffness of all spine bumpers and of the pelvis flesh should be much more tightly controlled. It is recommended that a method for certifying the front cervical bumpers should be developed. Recommendations are also made for tighter tolerance on the input parameters for the existing certification tests.
Der zweite Kinderunfallatlas der Bundesanstalt für Straßenwesen beschreibt die Unfallbelastung der bei Straßenverkehrsunfällen verunglückten Kinder für alle Kreise, Städte und Gemeinden in Deutschland. Für die Jahre 2006 bis 2010 wird die regionale Verteilung der Kinderverkehrsunfälle analysiert; darüber hinaus werden die Daten mit denen der Jahre 2001 bis 2005 in Beziehung gesetzt. Dadurch ist es möglich, die Verkehrssicherheitssituation von Kindern vor Ort mit der in anderen Kreisen und Gemeinden gleicher Größe zu vergleichen und somit einen Hinweis darüber zu erhalten, ob und wie sich die Unfallbelastung vor Ort von anderen unterscheidet.