Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (70)
- Buch (Monographie) (45)
- Wissenschaftlicher Artikel (4)
- Bericht (1)
- Arbeitspapier (1)
Schlagworte
- Analysis (math) (121) (entfernen)
Institut
In Europe, in situ measurements of sound reflection and airborne sound insulation of noise barriers are usually done according to CEN/TS 1793-5. This method has been improved substantially during the EU funded QUIESST collaborative project. Within the same framework, an inter-laboratory test has been carried out to assess the repeatability and reproducibility of the newly developed method when applied to real-life samples, including the effect of outdoor weather variability and sample ageing. This article presents the statistical analysis of the inter-laboratory test results, and the values of the repeatability and the reproducibility, both in one-third octave bands and for the single-number ratings. The estimated reproducibility values can be used as the extended measure of uncertainty at the 95% credibility level in compliance with the ISO GUM. The repeatability and reproducibility values associated with airborne sound insulation are also compared with the corresponding values for laboratory measurements in building acoustics and an acceptable agreement is found.
Intelligente Bauwerke - Anforderungen an die Aufbereitung von Messgrößen und ihrer Darstellungsform
(2015)
Ziel des Forschungsvorhabens FE 15.0548/2011/GRB war die Ausarbeitung einer Konzeption zu Anforderungen an die Aufbereitung und Verarbeitung von Messgrößen und ihrer Darstellung. Dies beinhaltete die Evaluierung und Entwicklung verschiedener modellbasierter und statistischer Analyseverfahren, die über den bisherigen Stand der Technik der Bauwerksüberwachung hinausgehen. Der Nutzen liegt in der Herausfilterung relevanter Informationen aus umfangreichem Datenmaterial (Vor-Aggregation) sowie der Erzeugung von belastbaren Zustandsinformationen bzw. Vorergebnissen hierzu durch eine frühzeitige, leistungsfähige Plausibilisierung. Es wurde gezeigt, dass durch den Einsatz von leistungsfähigen, gedächtnisbehafteten, selbstlernenden Algorithmen für die Sensorfusion, Interpolation, Plausibilitätserhöhung und Treffen fachtechnischer Monitoringaussagen Ergebnisse erzielt werden können, die bezüglich der Verarbeitung von Mess- und Erfassungsdaten weit über den aktuellen Stand beim Brückenmonitoring hinausgehen. Anhand mehrerer Szenarien, für die reale Erfassungsdaten zur Verfügung standen, wurde gezeigt, dass diese Verfahren sehr zuverlässig verschiedenste Signalstörungen, wie Messausreisser, erhöhtes Rauschen und Brummeinstreuung erkennen können. Nur durch die frühzeitige und zuverlässige Plausibilisierung von Sensordaten von Brückenbauwerken kann verhindert werden, dass offensichtlich fehlerhafte Messwerte (wie z.B. Messausreisser, störungsbehaftete Messungen) zu falschen Vorhersagen der Systemzuverlässigkeit von Brückenbauwerken durch rechnergestützte Systemmodelle führen.
Abbiegeunfälle mit Kollisionen zwischen rechtsabbiegenden Güterkraftfahrzeugen und Fahrrädern haben in der Regel schwerwiegende Folgen für den ungeschützten Verkehrsteilnehmer. In der Vergangenheit wurde durch eine steigende Anzahl von Spiegeln das individuelle Sichtfeld des Lkw-Fahrers vergrößert und die Sicherheit für ungeschützte Verkehrsteilnehmer durch den Seitenunterfahrschutz verbessert. Da Abbiegeunfälle trotz der Vielzahl an Spiegeln auch heute noch geschehen, gleichzeitig aber Fahrerassistenzsysteme Einzug in viele Fahrzeugklassen gehalten haben, liegt es nahe, derartige Systeme für die Verhinderung von Abbiegeunfällen zu nutzen. Um entsprechende Systementwicklungen fördern zu können oder aber auch Systeme vorschreiben zu können, sind Anforderungen und passende Testmethoden für Abbiegeassistenzsysteme erforderlich. Ziel der BASt war es, solche Anforderungen und ein mögliches Testverfahren hierfür zu entwickeln. Ausgehend von Analysen des Unfallgeschehens wurden charakteristische Parameter und Begleitumstände von Unfällen zwischen Fahrrädern und rechtsabbiegenden Lkw identifiziert. Aus fahrdynamischen Überlegungen folgt bei den gegebenen Parametern, dass nur eine frühe, aber niederschwellige Fahrerinformation eine wirkungsvolle Assistenzfunktion zur Verhinderung der Unfälle sein kann. Für automatische Bremsungen gibt es bisher noch zu wenig Erfahrungen im Feld, und klassische, hochschwellige, aber sehr spät erfolgende Warnsignale würden durch die dann noch verstreichende Reaktionszeit keine rechtzeitige Bremsung des Lkw-Fahrers mehr hervorrufen. Basierend auf dem identifizierten Parameterraum, der zum komfortablen Anhalten erforderlichen Zeit und einem geeigneten Kinematikmodell lassen sich die räumlichen Bereiche um den Lkw definieren, in dem eine Umfelderkennung den Fahrradfahrer detektieren können muss, damit das Informationssignal durch das Assistenzsystem an den Lkw-Fahrer rechtzeitig ausgegeben wird. Aktuell wird davon ausgegangen, dass ein Abbiegeassistenzsystem, das die hier beschriebenen Prüfungen besteht, einen sehr positiven Einfluss auf das Unfallgeschehen zwischen rechtsabbiegenden Lkw und Fahrrädern haben wird.
Zur Ermittlung einer Mehr- oder Minderbeanspruchung des Straßenoberbaus durch Lang-Lkw wurde eine Stichprobe von 1.746 Fahrten im Direktverkehr und 483 Fahrten im kombinierten Verkehr analysiert. Die durchschnittliche Fahrzeuggesamtmasse der Lang-Lkw betrug 32,3 t. Ca. 9 % der Lang-Lkw fuhren überladen. Das Niveau der Überladungen lag jeweils unterhalb 3 t. Die maximale Achslast betrug 11,7 t. Die Achslastverteilung von Lang-Lkw im kombinierten Verkehr weist ein niedrigeres Niveau als für Lang-Lkw im Direktverkehr auf. Im Vergleich zu äquivalenten konventionellen Lkw ergibt sich für Lang-Lkw eine um 5 % niedrigere Anzahl äquivalenter 10-t-Achsen. Der mittlere Achszahlfaktor fA von Lang-Lkw beträgt 7,40. Das Transportvolumen eines Lang-Lkw entspricht rechnerisch dem Transportvolumen von 1,53 äquivalenten konventionellen Lkw. Mit zunehmendem Anteil Lang-Lkw am Gesamtkollektiv Schwerverkehr (bis zu 9 %) ist eine zunehmende, vergleichsweise geringe Reduzierung der B-Zahl nach RStO 12 zu verzeichnen, was in der Regel jedoch nicht zu einem Wechsel in die nächstkleinere Belastungsklasse führen würde. Mittels Dimensionierung nach RDO Asphalt 09 errechnet sich bei Einsatz von Lang-Lkw nach dem Ende einer 30-jährigen Nutzungsdauer der Straßenbefestigung ein geringfügig niedrigerer Ermüdungsstatus, der zu einer marginalen Verlängerung des Nutzungszeitraums führen würde. Der Einsatz von Lang-Lkw würde unter Einhaltung der im Feldversuch definierten fahrzeugtechnischen Vorgaben und zulässigen Grenzwerte für Fahrzeuggesamtgewichte und Achslasten nicht zur Mehrbeanspruchung des Oberbaus von Straßen führen. Die rechnerisch festgestellte Minderbeanspruchung des Oberbaus im Vergleich zu konventionellen Lkw hat nur marginale Bedeutung und würde sich somit in der Praxis kaum spürbar auf die Nutzungsdauer der Straßen auswirken.
The paper gives an overview of the recent (mostly 2012) figures of killed bus/coach occupants (drivers and passengers) in 27 Member States of the European Union as reported by CARE. The Evolution of the figures of bus/coach occupants killed in road accidents urban, rural without motorway and on motorways from 1991 to 2010 in 15 Member States of the EU supplements this information. More detailed are the figures reported for Germany by the Federal Statistics. The paper displays long-term evaluations (1957 to 2012) for killed, seriously and slightly injured occupants in all kinds of buses/coaches. Midterm evaluations (1995 to 2012) of the figures of fatalities and casualties are displayed for different busses according to their identification of road using as coaches, urban buses, school buses, trolley buses and "other buses". To be able to compare the evolutions of the safety of vehicle occupants it is customary to use different risk indicators. Calculations and illustrations for three often used indicators with their development over time are given: fatalities, seriously injured and slightly injured per 100,000 vehicles registered, per 1 billion (109) vehicle-kilometres travelled and per 1 billion (109) person-kilometres. These indicators are shown for occupants of cars, goods vehicles and buses/coaches. For the period from 1957 until 2012 it is obvious, that for all three vehicle categories analysed there was a clear long-term trend towards more occupant safety in terms of casualties per vehicles registered and per vehicle mileage. This was most significant for car occupants but it can be seen for bus/coach occupants and goodsvehicle occupants as well. Figures of killed occupants and of casualties related to person-kilometres are calculated and displayed for the shorter period 1995 to 2012. Here it becomes obvious that the bus/coach is still the safest mode of transport for the occupants of road vehicles. Graphs for the casualty risk indices still show significantly higher risks for car occupants despite the corresponding curve moved sustainable downwards. It is remarkable, that the risks of being killed or injured for the occupants of urban buses is growing whereas the corresponding risk for the occupants of coaches in line traffic tends downwards. The article ends with a short comparison and discussion of the risk indicators which are actually published for the occupants (driver and passengers) of cars and the passengers of buses/coaches, railroads, trams and airplanes. The interpretation of such information depends on the perception and it seems that for a complete view not only one indicator should be used and the evolutions of the indicator values during longer periods (as displayed with examples in the paper) should also be taken into account.
Enhanced protection of pedestrians and cyclists remains on the focus. Besides infrastructural and behavioral aspects it is necessary to exploit technical solutions placed on motorized vehicles. Accident research needs reliable data as well as national road accident statistics. Changing the view on seriously injured road users is one of the challenges which will substantially contribute to the optimization on future traffic safety. The missing accuracy in the definition of personal injury has a detrimental effect on making cost efficient road safety policy which is not only focused on fatal accidents. The European commission requested that, starting in 2015, all EU member states provide more detailed data on the injury status of road casualties, with special regard to the group of seriously injured. Conventional accident data will always be essential. But to obtain detailed data about driver behavior in real traffic situations further data sources are required. These could be EDR data, data from electronic control units, data from traffic surveys and traffic counting, naturalistic diving studies and field operational tests. Gaining insight into normal as well as critical driver behavior will enable accident researchers to deduct functions estimating the increase or decrease of accident risk associated with certain behaviors or vehicle functions. Also with view to the introduction of highly automated driving functions in the future such data is urgently needed. Computer simulation based tools to estimate the benefits of active safety systems are another step on the way towards the safety assessment of automated driving. It is now the duty of the scientific community to ask the right questions, to develop a methodology and to merge all these data sources into a common framework for the assessment of future traffic safety innovations.
SEEKING is looking for answers regarding electric powered bicycles and their relation to traffic safety issues. Does a cyclist need "E"? Is it as risky as riding a moped or are E-bikes creating conflicts with other cyclists? The project described herein, funded by the Austrian Ministry of Transport, has the aim of seeking answers to these hot topics. The SEEKING-team shows an in-depth investigation of vehicle dynamic sensing, together with subjective feedback of test riders to detect similarities and differences between conventional cycling and E-biking. Following an overview on the international status quo, measurement runs and their analyses are performed to find a set of preventative measures to make (E-)biking safer. A specific focus is the detection of curve handling, stopping and acceleration phases as well as conflict studies on course-based test rides and "real world" tests on cycling paths (naturalistic riding).
Ziel des Forschungsvorhabens war es zu untersuchen, ob in verschiedenen Prüfstellen mit dem Walzsektor-Verdichtungsgerät hergestellte Asphalt-Probeplatten gleiche Eigenschaften aufweisen, damit z.B. verträgliche Ergebnisse für Performance-Prüfungen ermittelt werden können. Dazu wurde in 12 Prüfstellen ein Verfahrens-Audit durchgeführt, um eine einheitliche Vorgehensweise bei der Herstellung dieser Platten zu gewährleisten. Anschließend wurden aus verschiedenen Asphaltvarianten WSV-Platten hergestellt und an daraus gewonnenen Probekörpern umfangreiche Performance-Prüfungen durchgeführt. Die ermittelten Ergebnisse zeigen, dass es möglich ist WSV-Platten mit verträglicher Raumdichte in unterschiedlichen WSV-Geräten sowie verschiedenen Prüfstellen herzustellen. Die Ergebnisse der Spurbildungs-, Druck-Schwell- und Zugversuche haben gezeigt, dass die WSV-Platten trotz ähnlicher Raumdichten nicht zwangsläufig verträgliche Ergebnisse im Versuch aufweisen und sich daher in verschiedenen Prüfstellen keine vergleichbaren Ergebnisse für diese Versuche ermitteln lassen. Lediglich bei den Abkühl- und Spaltzug-Schwellversuchen konnten verträgliche Ergebnisse erzielt werden. Für keine der ermittelten Kenngrößen der Performance-Prüfungen ließen sich Zusammenhänge mit der Raumdichte ermitteln. Somit lässt sich die Größe der Ergebnisse bei den Versuchen nicht auf unterschiedliche Größen der Raumdichten der Probekörper zurückführen. Da sich trotz geringer Unterschiede in den Raumdichten nur in ausgewählten Performance-Untersuchungen Unterschiede zeigen, ist davon auszugehen, dass die Streuungen in den Performance-Untersuchungen vornehmlich auf die Sensitivität dieser Versuche zurückzuführen sind. Das Verfahren zur Herstellung von Probekörpern für Performance-Prüfungen aus WSV-Platten scheint aufgrund der Gesamtheit der ermittelten Kenngrößen (Raumdichte, etc.), deren Aussehen, den Erkenntnissen aus dem Verfahrensaudit sowie der Performance-Prüfungen das richtige Verfahren zu sein.
Interdisciplinary accident research and research projects of AARU Audi Accident Research Unit
(2017)
AARU (Audi Accident Research Unit) is an interdisciplinary research project of the University Hospital Regensburg in cooperation with AUDI AG. Specific objective is to comprehend the respective accident scenario and retrieve generally applicable findings as to technical, medical and psychological processes. In order to prevent traffic accidents and to alleviate vehicle accident consequences, postulates of general traffic safety, human-machine interaction, technical design and function of new vehicles and occupant as well as third party protection shall be inferred from these findings. Specifically, each accident with new Audi, Lamborghini and Ducati vehicles involved is analyzed interdisciplinary, discussed in a case meeting and anonymously documented with more than 2,000 parameters. The database is continually used for solving safety relevant issues. Parallel to accident analysis, research projects are performed in the fields medicine, psychology and engineering in order to gain comprehensive insight and identify potential additional areas of activity of accident research.
Die Bundesanstalt für Straßenwesen (BASt) bringt zum Ende jeden Jahres eine Prognose der Unfall- und Verunglücktenzahlen des noch laufenden Jahres heraus, um so über die Entwicklung der Verkehrssicherheit in Deutschland Bilanz ziehen zu können. Dabei wird das Unfallgeschehen nach dem Schweregrad der Konsequenzen, der Ortslage sowie Alter und Art der Verkehrsbeteiligung der Verunglückten in 27 Zeitreihen unterteilt. Zu diesem Zeitpunkt sind die Daten lediglich für die ersten acht oder neun Monate erhältlich. Um Bilanz zu ziehen, werden die Anzahlen der letzten drei oder vier Monate prognostiziert. Gesamtziel des hier beschriebenen Forschungsvorhabens ist die Optimierung der jährlichen Unfallprognosen durch Anwendung von strukturellen Zeitreihenmodellen, bei denen die Vorhersagen aus dem Trend der vorliegenden Monate, und der Dynamik der vorhergehenden Jahre abgeleitet werden. Um dem Einfluss der Witterungsverhältnisse Rechnung zu tragen, werden dabei meteorologische Variablen in das Vorhersagemodell aufgenommen. Um die Modelle zu testen, werden die endgültigen Daten der letzten 15 Jahre jeweils aus den vorläufigen Daten der ersten Monate vorhergesagt und mit den tatsächlich beobachteten endgültigen Unfall- und Verunglücktenzahlen verglichen. Die Resultate zeigen, dass im Vergleich zu den bisherigen Vorhersagen mithilfe der hier vorgestellten Modelle die Vorhersagen für 25 der 27 Reihen präziser werden. Lediglich zwei Reihen zeigen einen leichten Anstieg des Vorhersagefehlers. Beim Vergleich von Modellen mit und ohne meteorologischen Variablen zeigt sich, dass 23 der 27 Reihen besser vorhergesagt werden können, wenn man das Wetter berücksichtigt. Neben der verbesserten Vorhersage ermöglicht die Aufnahme der Wettervariablen auch eine Einschätzung, wie groß der Einfluss der Witterungsgegebenheiten auf das Unfallgeschehen ist. Es zeigt sich also, dass die Anwendung von strukturellen Zeitreihenmodellen und die Berücksichtigung von meteorologischen Variablen zu einer deutlichen Verbesserung der Vorhersagegenauigkeit führen. Die Verbesserung der Vorhersagen durch die Aufnahme von Wettervariablen bestätigt nochmals den Einfluss der Witterungsumstände auf das Unfallgeschehen.
Advancing active safety towards the protection of vulnerable road users: the PROSPECT project
(2017)
Accidents involving Vulnerable Road Users (VRU) are still a very significant issue for road safety. According to the World Health Organisation, pedestrian and cyclist deaths account for more than 25% of all road traffic deaths worldwide. Autonomous Emergency Braking Systems have the potential to improve safety for these VRU groups. The PROSPECT project (Proactive Safety for Pedestrians and Cyclists) aims to significantly improve the effectiveness of active VRU safety systems compared to those currently on the market by expanding the scope of scenarios addressed by the systems and improving the overall system performance. The project pursues an integrated approach: Newest available accident data combined with naturalistic observations and HMI guidelines represent key inputs for the system specifications, which form the basis for the system development. For system development, two main aspects are considered: advanced sensor processing with situation analysis, and intervention strategies including braking and steering. All these concepts are implemented in several vehicle prototypes. Special emphasis is put on balancing system performance in critical scenarios and avoiding undesired system activations. For system validation, testing in realistic scenarios will be done. Results will allow the performance assessment of the developed concepts and a cost-benefit analysis. The findings within the PROSPECT project will contribute to the generation of state -of-the-art knowledge, technical innovations, assessment methodologies and tools for advancing Advanced Driver Assistance Systems towards the protection of VRUs. The introduction of a new generation safety system in the market will enhance VRU road safety in 2020-2025, contributing to the "Vision Zero" objective of no fatalities or serious injuries in road traffic set out in the Transport White Paper. Furthermore, the test methodologies and tools developed within the project shall be considered for the New Car Assessment Programme (Euro NCAP) future roadmaps, supporting the European Commission goal of halving the road toll in the 2011-2020 timeframe.
Europe has benefited from a decreasing number of road traffic fatalities. However, the proportion of older road users increases steadily. In an ageing society, the SENIORS project aims to improve the safe mobility of older road users by determining appropriate requirements towards passive vehicle safety systems. Therefore, the characteristics of road traffic crashes involving the elderly people need to be understood. This paper focuses on car occupants and pedestrians or cyclists in crashes with modern passenger cars. Ten crash databases and four hospital statistics from Europe have been analysed to answer the questions on which body regions are most frequently and severely injured in the elderly, and specific injuries sustained by always comparing older (65 years and above) with midâ€aged road users (25â€64 years). It was found that the body region thorax is of particularly high importance for the older car occupant with injury severities of AIS2 or AIS3+, where as the lower extremities, head and the thorax need to be considered for older pedestrians and cyclists. Further, injury risk functions were provided. The hospital data analysis showed less difference between the age groups. The linkage between crash and hospital data could only be made on a general level as their inclusion criteria were quite different.
The presence and performance of Advanced Driver Assistance Systems (ADAS) has increased over last years. Systems available on the market address also conflicts with vulnerable road users (VRUs) such as pedestrians and cyclists. Within the European project PROSPECT (Horizon2020, funded by the EC) improved VRU ADAS systems are developed and tested. However, before determining systems" properties and starting testing, an up-to-date analysis of VRU crashes was needed in order to derive the most important Use Cases (detailed crash descriptions) the systems should address. Besides the identified Accident Scenarios (basic crash descriptions), this paper describes in short the method of deriving the Use Cases for car-to-cyclist crashes. Method Crashes involving one passenger car and one cyclist were investigated in several European crash databases looking for all injury severity levels (slight, severe and fatal). These data sources included European statistics from CARE, data on national level from Germany, Sweden and Hungary as well as detailed accident information from these three countries using GIDAS, the Volvo Cars Cyclist Accident database and Hungarian in-depth accident data, respectively. The most frequent accident scenarios were studied and Use Cases were derived considering the key aspects of these crash situations (e.g., view orientation of the cyclist and the car driver- manoeuvre intention) and thus, form an appropriate basis for the development of Test Scenarios. Results Latest information on car-to-cyclist crashes in Europe was compiled including details on the related crash configurations, driving directions, outcome in terms of injury severity, accident location, other environmental aspects and driver responsibilities. The majority of car-to-cyclist crashes occurred during daylight and in clear weather conditions. Car-to-cyclist crashes in which the vehicle was traveling straight and the cyclist is moving in line with the traffic were found to result in the greatest number of fatalities. Considering also slightly and seriously injured cyclists led to a different order of crash patterns according to the three considered European countries. Finally the paper introduced the Use Cases derived from the crash data analysis. A total of 29 Use Cases were derived considering the group of seriously or fatally injured cyclists and 35 Use Cases were derived considering the group of slightly, seriously or fatally injured cyclists. The highest ranked Use Case describes the collision between a car turning to the nearside and a cyclist riding on a bicycle lane against the usual driving direction. A unified European dataset on car-to-cyclist crash scenarios is not available as the data available in CARE is limited, hence national datasets had to be used for the study and further work will be required to extrapolate the results to a European level. Due to the large number of Use Cases, the paper shows only highest ranked ones.
Ziel des Forschungsprojektes war die Erarbeitung eines webbasierten Verfahrens für die Verkehrssicherheitsarbeit, welches dem Anwender bei der Bearbeitung von Unfallhäufungen potenziell geeignete Maßnahmen in Abhängigkeit der örtlichen Randbedingungen vorschlägt, deren Sicherheitswirkung abschätzt sowie die Möglichkeit bietet, die Maßnahmenwirkung in einer retroperspektiven Betrachtung zu evaluieren. Dabei stellt das Verfahren eine Weiterentwicklung und Ergänzung des Merkblatts "Auswertung von Straßenverkehrsunfällen, Teil 2: Maßnahmen gegen Unfallhäufungen" (FGSV 2002) dar. Grundgerüst der Maßnahmensammlung bilden neben dem Merkblatt der FGSV (2002) aktuelle Erkenntnisse verschiedener Forschungsarbeiten (SPAHN 2012, GERLACH et al. 2009, MAIER et al. 2010, u. w.) zu Maßnahmen gegen Unfallhäufungen, die einer Prüfung und Kategorisierung unterzogen wurden. Der Hauptbestandteil des webbasierten Verfahrens umfasst Schritte zur Unfallanalyse, Maßnahmenfindung und Wirksamkeitsprüfung nach dem "Merkblatt zur örtlichen Unfalluntersuchung in Unfallkommissionen " M UKo" (FGSV 2012). Mit der Übermittlung der Unfallinformationen zu Unfallhäufungen aus den EDV-Systemen der Unfalldatenhaltung in das Programm ist eine spezifische Bearbeitung von Unfallhäufungen möglich. Darüber hinaus wird die Möglichkeit von Rangfolgebildungen zur zielgerichteten Priorisierung von Arbeitsprogrammen angeboten. Die Vorschläge geeigneter Maßnahmen zur Bekämpfung einer Unfallhäufung stuetzen sich im Verfahren auf die Analyse typischer Konfliktsituationen, welche aus den Unfalldatensätzen bestimmt werden. Zur Überprüfung der Angemessenheit und Durchsetzbarkeit von Maßnahmen (-paketen) steht dem Anwender eine Abschätzung des Nutzen-Kosten-Verhältnisses auf Basis des fallbezogenen Unfallgeschehens zur Verfügung. Die kontinuierliche Anwendung des Verfahrens erlaubt dem Nutzer die Dokumentation der Arbeitsschritte. Diese beinhaltet über die Umsetzungskontrolle hinaus wiederum eine fallbezogene Wirksamkeitsprüfung (Evaluierung) der realisierten Maßnahmen. Die stetige Aktualisierung der Maßnahmen und ihrer Kenngrößen (u. a. Wirkungsgrad, Kosten) stellt einen wesentlichen Bestandteil des webbasierten Verfahrens dar, um einen zielorientierten Beitrag zur Bekämpfung von Unfallhäufungen zu leisten.
While cyclists and pedestrians are known to be at significant risk for severe injuries when exposed to road traffic accidents (RTAs) involving trucks, little is known about RTA injury risk for truck drivers. The objective of this study is to analyze the injury severity in truck drivers following RTAs. Between 1999 and 2008 the Hannover Medical School Accident Research Unit prospectively documented 43,000 RTAs involving 582 trucks. Injury severity including the abbreviated injury scale (AIS) and the maximum abbreviated injury scale (MAIS) were analyzed. Technical parameters (e.g. delta-v, direction of impact), the location of accident, and its dependency on the road type were also taken into consideration. The results show that the safety of truck drivers is assured by their vehicles, the consequence being that the risk of becoming injured is likely to be low. However, the legs especially are at high risk for severe injuries during RTAs. This probability increases in the instance of a collision with another truck. Nevertheless, in RTAs involving trucks and regular passenger vehicles, the other party is in higher risk of injury.
The proportion of older road users is increasing because of demographic change (in the group 65+ from current 18% to about 24% by 2030). The mobility needs of people 65+ often differ from those of younger people. Seniors (65+) are already more involved in fatal accidents than younger road users. According to the age development, the senior share of road deaths in the EU of today is increasing nearly one-fifth to one-third. From the in-depth analysis of accidents generic simulation models were developed. Attention has been paid both to psycho-physical characteristics as well as on the social and physical environment and their specifics in conjunction with seniors. By simulating the defined scenarios and varying the defined relevant parameters, accident influencing factors were examined as a basis for avoidance. In addition, the parameters were varied to show the influence from the vehicle, the pedestrian and the infrastructure to avoid the accident or to characterize the conditions for which the accident is inevitable.
Causation of traffic accidents with children from the perspective of all involved participants
(2017)
In the year 2014 about 2,800 children between zero and 14 years got injured due to traffic accidents in Austria. More than 50% were taking part in traffic as active road users like cyclists or pedestrians. Within this study 46 real world traffic accidents between vehicles and children as pedestrians were analysed. In 39 cases, car drivers hit the crossing children. In the other cases, the collision opponents were busses, trucks or motorcycles. Most of the children got hit while crossing a road at urban sites. By analysing the traffic accidents from the perspectives of all involved participants, vehicle drivers and injured children, it is possible to identify factors for each participant, which led to the accident and factors that contributed the accident. The main task is to find patterns in the behaviour of crash victims (children and driver) before the collision. One important fact is that in more than 50% of the analysed cases sight obstructions were an important contributing factor for both, the driver and the child. From drivers view situations in which the child moved unexpected into the driven road lane were often found. For the injured child, factors like: no attention to the road traffic or no sufficient traffic observation were found to be relevant. Further it- possible to sensitise children and adults to possible source of critical traffic situations according to the findings of this study.
For more than a decade, ADAC accident researchers have analysed road accidents with severe injuries, recording some 20,000 accidents. An important task in accident research is to determine the causative factors of road accidents. Apart from vehicle engineering and human factors, accident research also focuses on infrastructural and environmental aspects. To find out what accident scenarios are the most common in ADAC accident research and what driver assistance systems can prevent them, our first task was to conduct a detailed accident analysis. Using CarMaker, we performed a realistic simulation of accident scenarios, including crashes, with varying parameters. To begin with, we made an initial selection of driver assistance systems in order to determine those with the greatest accident prevention potential. One important finding of this study is that the safety potential of the individual driver assistance systems can actually be examined. It also turned out that active safety offers even much more potential for development and innovation than passive safety. At the same time, testing becomes more demanding, too, as new systems keep entering the market, many of them differing in functional details. ADAC will continue to test all driver assistance systems as realistically as possible so as to be able to provide advice to car buyers. Therefore, it will be essential to develop and improve test conditions and criteria.
Still correlated with high mortality rates in traffic accidents traumatic aortic ruptures were frequently detected in unprotected car occupants in the early years. This biomechanical analysis investigates the different kinds of injury mechanisms leading to traumatic aortic injuries in todays traffic accidents and how the way of traffic participation affects the frequency of those injuries over the years. Based on GIDAS reported traffic accidents from 1973 to 2014 are analyzed. Results show that traumatic aortic injuries are mainly observed in high-speed accidents with high body deceleration and direct load force to the chest. Mostly chest compression is responsible for the load direction to the cardiac vessels. The main observed load vector is from caudal-ventral and from ventral solely, but also force impact from left and right side and in roll-over events with chest compression lead to traumatic aortic injuries. Classically, the injury appeares at the junction between the well-fixed aortic arch and the pars decendens following a kind of a scoop mechanism, a few cases with a hyperflexion mechanism are also described. In our analysis the deceleration effect alone never led to an aortic rupture. Comparing the past 40 years aortic injuries shift from unprotected car occupants to today's unprotected vulnerable road users like pedestrians, cyclists and motorcyclists. Still the accident characteristics are linked with chest compression force under high speed impact, no seatbelt and direct body impact.
In this study, the mean profile depth (MPD) that expresses roughness of road pavements was calculated using the road survey equipment vehicle and the calculated MPD was compared with the real number of traffic accidents. The analysis method used in this study was to classify the appropriate clustering in relation to traffic accidents using the K-means clustering and to compare this with the presence of traffic accidents via the MPDs to derive the result. K-means clustering was used in the analysis method and four clusters were found using the clustering analysis results. The center of each cluster was 0.627, 0.850, 1.118, and 1.237, respectively. The result of this study is expected to be utilized as foundational research in the traffic safety area.