Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (117)
- Buch (Monographie) (42)
- Wissenschaftlicher Artikel (17)
- Arbeitspapier (5)
Schlagworte
- Verletzung (181) (entfernen)
Schutz von Fahrzeuginsassen
(1983)
Ausgehend von unfallstatistischen Daten und Ausführungen über Unfallablauf und Unfallfolgen werden Schutzmaßnahmen diskutiert, die das Verletzungsrisiko für Fahrzeuginsassen möglichst niedrig halten. Die Wirksamkeit von Schutzmaßnahmen wird beeinflusst von der Unfallkonstellation, Eigenschaften der Pperson und vom Fahrzeug (Deformationscharakteristik, Auslegung des rückhaltesystems). Die Gesamtwirksamkeit hängt wiederum ab von der Wirksamkeit des Rückhaltesystems, der Benutzungshäufigkeit und der Benutzungsqualität. Die Arbeit endet mit volkswirtschaftlichen Überlegungen und kommt zu dem Schluss, dass auch in Zukunft als wichtigste Maßnahme zum Schutz von Fahrzeuginsassen die Erhöhung der Anlegequote für Sicherheitsgurte anzusetzen ist.
Test and assessment procedures for passive pedestrian protection of passenger cars are in place for many years within world-wide regulations as well as consumer test programmes. Nevertheless, recent accident investigations show a stagnation of pedestrian fatality numbers on European roads alongside increasing injury severities for older road users. The EU-funded SENIORS (Safety ENhancing Innovations for Older Road userS) project developed and evaluated a thorax injury prediction tool (TIPT) for later incorporation within test and assessment procedures. Accident data indicates an increasing portion of AIS2 and AIS3+ thoracic injuries of older pedestrians and cyclists which are currently not assessed in any test procedure for vulnerable road users. Therefore, SENIORS focused on the development of a test tool predicting the risk of rib fractures of vulnerable road users (VRU). While injury risk functions were reanalyzed, human body model (HBM) simulations against categorized generic vehicle frontends served as input for the definition of test setups and corresponding impact parameters. TIPT component tests against a generic frontend and an actual vehicle were used for the evaluation of the technical feasibility. The TIPT component tests shows the general feasibility of a test procedure for the assessment of thoracic injuries, with good repeatability and reproducibility of kinematics and results. Impact parameters such as the inclination angles of the thorax, angles of the velocity vector and impact speeds well replicate the parameters gained from the HBM simulations. The proposed markup and assessment scheme offers the possibility of a homogeneous evaluation of the protection potential of vehicle frontends while maintaining justifiable testing efforts. During evaluation testing, the proposed requirements were entirely met. The developed prototype of TIPT and launching system offer impact angles and speeds as suggested by HBM simulations. However, since thorax impacts during pedestrian accidents do not occur perpendicularly to the vehicle surface in most cases, the TIPT built-in linear potentiometers do not acquire the true resultant intrusions on the ribcage and thus, TIPT rib deflections do not reflect the actual human injury risk. However; for the impact forward to the bonnet leading edge, the TIPT seems applicable without further modifications. The test and assessment procedures using the TIPT offer for the first time the possibility of replicating the kinematics of a pedestrian thorax with a component test. The developed assessment scheme gives a first indication on how the risk for thoracic injuries could be implemented within the Euro NCAP Box 3 assessment. Future development of the TIPT may focus on implementing a rib cage that can deflect in all axes in a humanlike way.
To assess occupant safety in a crash test, criteria associating the measurements made with a crash test dummy to injury risk are necessary. To enable better protection of elderly car occupants the objective of this study was to develop improved thoracic injury criteria for the THOR average male dummy. The development of these criteria is usually based on matched dummy and Post Mortem Human Surrogate (PMHS) tests by relating the obtained PMHS injuries to dummy measurements. This approach is limited, since only a few tests in relevant loading conditions are available and any new test series requires high efforts to be performed due to their complexity and costs. To overcome these limitations and to extend the dataset for the development of THOR dummy chest injury risk functions a simulation-based approach was applied within the EC funded project SENIORS (Safety Enhanced Innovations For older Road Users - www.seniors-project.eu). Within this study frontal impact sled simulations with an FE model representing a THOR average male dummy and matched simulations with a human body model (HBM) representing an elderly car occupant were carried out. The HBM used for this study was the THUMS TUC with modified rib cage, which was developed in SENIORS. The modifications included material and geometry changes aiming to represent an elderly car occupant. The rib fracture risk was predicted with a deterministic approach whereby a rib was considered broken when the strain exceeded an age-dependent threshold. Furthermore, a probabilistic method was applied to predict the probability of sustaining a certain number of fractured ribs by comparing local strain values to the distribution of cortical rib ultimate strain. By relating the output from the HBM simulations to a multi-point dummy injury criterion, injury risk curves were calculated by statistical methods. The wide range of loading conditions resulted in the desired range of injuries and THOR ATD output. The number of fractured ribs predicted by the HBM based on the deterministic prediction method was between 0 and 15. Furthermore, the probabilistic risk for the number of rib fractures equal or greater than two, three or four was calculated for each load case. The THOR rib deflection criterion Rmax was between 18 and 56 mm, while the PC Score was in the range of 2.5 to 7.2. Based on these outputs new risk curves for the predicted deterministic (AIS2+/3+) and probabilistic injury risk were calculated. The new curves show reasonable shapes and significance that provide trust in their application. The new risk curves are compared to risk curves obtained by traditional methods. The results were found similar to previous injury risk functions based on physical tests, which gives a high level of confidence in the chosen approach. The simulation-based approach of matched ATD model vs. HBM simulation was successfully applied. Rmax curves show a slightly better quality than the injury criterion PC Score.
At the end of each year, the German Federal Highway Research Institute (BASt) publishes the road safety balance of the closing year. They describe the development of accident and casualty numbers disaggregated by road user types, age groups, type of road and the consequences of the accidents. However, at the time of publishing, these series are only available for the first eight or nine months of the year. To make the balance for the whole year, the last three or four months are forecasted. The objective of this study was to improve the accuracy of these forecasts through structural time-series models that include effects of meteorological conditions. The results show that, compared to the earlier heuristic approach, root mean squared errors are reduced by up to 55% and only two out of the 27 different data series yield a modest rise of prediction errors. With the exception of four data series, prediction accuracies also clearly improve incorporating meteorological data in the analysis. We conclude that our approach provides a valid alternative to provide input to policy makers in Germany.
Unfälle zerstören Sachkapital und mindern die der Volkswirtschaft zur Verfügung stehende Arbeitskraft. Zur Entscheidungsunterstützung nutzt die Verkehrssicherheitspolitik in ökonomischen Analysen monetäre Wertansätze, welche sich auf die Folgen der Straßenverkehrsunfälle beziehen und deren Ausmaß quantifizieren. Durch die Bundesanstalt für Straßenwesen (BASt) werden jährlich auf der Grundlage eines Berechnungsmodells die Kosten ermittelt, die durch Straßenverkehrsunfälle entstehen. Um den Veränderungen der wirtschaftlichen Eingangsparameter und der Entwicklung des Wissensstands zur Bewertung von Unfallschäden gerecht zu werden, wurde dieses Modell im Rahmen eines Forschungsprojektes mit Bezug auf das Jahr 2005 überarbeitet und fortgeschrieben. Danach ergeben sich für das Jahr 2009 volkswirtschaftliche Kosten in Höhe von 30,5 Milliarden Euro durch Personen- und Sachschäden infolge von Straßenverkehrsunfällen in Deutschland. Gegenüber dem Basisjahr 2005 sind die Unfallkosten damit um circa 3 Prozent (= 960 Millionen Euro) gesunken.
Bedingt durch ihre Definition - mindestens 24-stündiger Klinikaufenthalt - umfasst die Kategorie der Schwerverletzten in der amtlichen Verkehrsunfallstatistik eine große Breite tatsächlicher Verletzungsschweregrade. Durch das hohe persönliche Leid sowie die bedeutsamen volkswirtschaftlichen Kosten sind innerhalb dieser Gruppe die Schwerstverletzten von besonderem Interesse. Es werden drei Studien der Bundesanstalt für Straßenwesen (BASt) vorgestellt, in denen auf Grundlage verschiedener Datenquellen Verletzungsmuster und Verletzungsschwere in Zusammenhang mit Parametern des Unfallgeschehens gebracht wurden. Zusammengefasst zeigt sich, dass (a) die Zahl der Schwerstverletzten sich in den letzten Jahren nicht in gleichem Maße reduziert hat, wie die Zahlen Schwerverletzter und Getöteter; (b) sich über verschiedene Datenquellen (GIDAS, TraumaRegister DGU, Rettungsdienst, Polizei) ähnliche Verletzungsmuster in Abhängigkeit der Verkehrsteilnahme zeigen; (c) durch die Verbindung von medizinischen Daten des TraumaRegisters mit Daten der Polizei gute Voraussetzungen für eine umfangreiche Erfassung Schwerstverletzter in Deutschland geschaffen werden könnten.
Trotz intensiver Bemühungen zur Verbesserung der Verkehrssicherheit kam es im Jahr 2016 in Deutschland zu rund 2,6 Millionen Straßenverkehrsunfällen. Neben der Erforschung von Unfallursachen sind in den letzten Jahren zunehmend auch die Unfallfolgen in den Fokus nationaler und internationaler Forschungsaktivitäten gerückt. Im Zentrum stehen hierbei vor allem die Analyse von Verletzungsart und -schwere sowie die Kosten von Straßenverkehrsunfällen. Humanitäre Kosten, wie Trauer und Leid, die nicht nur die Verunglückten selber, sondern auch Angehörige, Zeugen oder Helfer betreffen können, fanden bislang jedoch kaum Berücksichtigung. Studien zeigen, dass ein relevanter Anteil von im Straßenverkehr verunglückten Personen nach dem Ereignis psychisch belastet ist. Während in Deutschland die Versorgungsstrukturen zur Behandlung körperlicher Verletzungen in Folge eines Unfalls gut etabliert und eng miteinander verzahnt sind, sind die Angebote und Strukturen zur Versorgung psychischer Unfallfolgen in der Bevölkerung eher weniger gut bekannt und auch von Forschungsseite bislang kaum untersucht. Primäres Ziel der vorliegenden Untersuchung war es daher, das Versorgungsangebot für Menschen mit psychischen Unfallfolgen in Deutschland zu erfassen und zu systematisieren. Zu diesem Zweck wurde erstmalig eine bundesweite Recherche potenziell an der Versorgung psychischer Unfallfolgen beteiligter Institutionen durchgeführt. Darüber hinaus wurden eine Online-Befragung und Interviews mit Vertretern dieser Institutionen realisiert, um das Versorgungsangebot zu analysieren und ggf. bestehenden Optimierungsbedarf zu identifizieren. Abschließend wurden die Ergebnisse in einem Experten-Workshop diskutiert und konkrete Ansätze zur Verbesserung der Versorgungssituation erarbeitet. Im Rahmen der Recherchearbeiten wurden 2.657 potenziell an der Versorgung von Menschen mit psychischen Unfallfolgen beteiligte Institutionen identifiziert. Diese Institutionen wurden dazu eingeladen, sich an einer Online-Befragung zu beteiligen. Anhand der erhobenen Basisdaten (n = 155) zeigte sich u.a., dass ein breites Spektrum inhaltlich unterschiedlich ausgerichteter Institutionen an der Versorgung psychischer Unfallfolgen beteiligt ist. Gleichzeitig existieren kaum spezialisierte Angebote für diese Zielgruppe. Im zweiten Befragungsteil (n = 110), in dem insbesondere bestehende Hürden und Verbesserungsmöglichkeiten im Versorgungsprozess eruiert wurden, zeigte sich deutlicher Optimierungsbedarf: Das Versorgungsangebot in Deutschland wurde von den Befragten mehrheitlich als „eher gering“ bis „mittelmäßig“ eingeschätzt. Vorhandene Angebote seien für die Betroffenen „eher schlecht“ auffindbar, sodass Patienten oftmals „Irrwege“ hinter sich hätten, bis sie ein adäquates Unterstützungsangebot erhielten. Zudem mangele es an Vernetzung zwischen den Institutionen und es gebe – unabhängig von der eigentlichen Betreuung der Betroffenen – einen hohen Arbeitsaufwand, zum Beispiel durch viel Bürokratie. …
Anhand von zwei verschiedenen Versuchskonfigurationen wurde das Schutzpotential von Kopfschutzsystemen (Fahrradhelm und airbagbasiertes System) untersucht. Hierbei wurden die resultierende Kopfbeschleunigung als Messwert sowie das Kopfverletzungskriterium HIC bei Versuchen ohne und mit Kopfschutzsystem vergleichend gegenübergestellt.
In line with the new definition introduced by the European Commission (EC), the number of seriously injured road casualties in Germany for 2014 is assessed in this study. The number of MAIS3+ casualties is estimated by two different methodological approaches. The first approach is based on data from the German Inâ€Depth Accident Study (GIDAS), which is closely related to the German Road Traffic Accident Statistics. The second approach is based on data from the German TraumaRegister DGU-® (TRâ€DGU), which includes many more hospitals but not all MAIS3+ injuries.
One main objective of the EU-Project SENIORS is to provide improved methods to assess thoracic injury risk to elderly occupants. In contribution to this task paired simulations with a THOR dummy model and human body model will be used to develop improved thoracic injury risk functions. The simulation results can provide data for injury criteria development in chest loading conditions that are underrepresented in PMHS test data sets that currently proposed risk functions are based on. To support this approach a new simplified generic but representative sled test fixture and CAE model for testing and simulation were developed. The parameter definition and evaluation of this sled test fixture and model is presented in this paper. The justification and definition of requirements for this test set-up was based on experience from earlier studies. Simple test fixtures like the gold standard sled fixture are easy to build and also to model in CAE, but provide too severe belt-only loading. On the other hand a vehicle buck including production components like airbag and seat is more representative, but difficult to model and to be replicated at a different laboratory. Furthermore some components might not be available for physical tests at later stage. The basis of the SENIORS generic sled test set-up is the gold standard fixture with a cable seat back and foot rest. No knee restraint was used. The seat pan design was modified including a seat ramp. The three-point belt system had a generic adjustable load limiter. A pre-inflated driver airbag assembly was developed for the test fixture. Results of THOR test and simulations in different configurations will be presented. The configurations include different deceleration pulses. Further parameter variations are related to the restraint system including belt geometry and load limiter levels. Additionally different settings of the generic airbag were evaluated. The test set-up was evaluated and optimized in tests with the THOR-M dummy in different test configurations. Belt restraint parameters like D-ring position and load limiter setting were modified to provide moderate chest loading to the occupant. This resulted in dummy readings more representative of the loading in a contemporary vehicle than most available PMHS sled tests reported in the literature. However, to achieve a loading configuration that exposes the occupant to even less severe loading comparable to modern vehicle restraints it might be necessary to further modify the test set-up. The new generic sled test set-up and a corresponding CAE model were developed and applied in tests and simulations with THOR. Within the SENIORS project with this test set-up also volunteer and PMHS as well as HBM simulations are performed, which will be reported in other publications. The test environment can contribute in future studies to the assessment of existing and new frontal impact dummies as well as dummy improvements and related instrumentation. The test set-up and model could also serve as a new standard test environment for PMHS and volunteer tests as well as HBM simulations.