Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (409)
- Wissenschaftlicher Artikel (37)
- Buch (Monographie) (18)
- Teil eines Buches (Kapitel) (9)
- Arbeitspapier (8)
- Bericht (1)
Sprache
- Englisch (482) (entfernen)
Schlagworte
- Conference (279)
- Konferenz (277)
- Germany (178)
- Deutschland (174)
- Unfall (163)
- Accident (162)
- Injury (116)
- Verletzung (116)
- Safety (102)
- Sicherheit (97)
- Unfallrekonstruktion (80)
- Analyse (math) (69)
- Analysis (math) (68)
- Bewertung (67)
- Schweregrad (Unfall, Verletzung) (66)
- Evaluation (assessment) (65)
- Vehicle (65)
- Fahrzeug (64)
- Severity (accid, injury) (64)
- Statistics (64)
- Fußgänger (63)
- Pedestrian (63)
- Statistik (63)
- Simulation (59)
- Tödlicher Unfall (59)
- Fatality (58)
- Anfahrversuch (56)
- injury) (54)
- Reconstruction (accid) (53)
- Verletzung) (52)
- Datenbank (51)
- Schweregrad (Unfall (51)
- Severity (accid (49)
- Car (46)
- Datenerfassung (46)
- Collision (45)
- Data acquisition (45)
- Europa (45)
- Europe (45)
- Impact test (veh) (45)
- Unfallverhütung (45)
- Accident prevention (44)
- Test method (44)
- Zusammenstoß (43)
- Prüfverfahren (42)
- On the spot accident investigation (41)
- Untersuchung am Unfallort (40)
- Active safety system (38)
- Cause (38)
- Frontalzusammenstoß (38)
- Ursache (38)
- Radfahrer (37)
- Test (37)
- Aktives Sicherheitssystem (36)
- Data bank (36)
- Fahrerassistenzsystem (36)
- Head on collision (36)
- Cyclist (35)
- Versuch (35)
- Driver (34)
- Driver assistance system (34)
- Fahrer (34)
- Passives Sicherheitssystem (34)
- Passive safety system (31)
- Geschwindigkeit (30)
- Method (30)
- Verfahren (30)
- Leistungsfähigkeit (allg) (29)
- Speed (29)
- Accident reconstruction (27)
- Insasse (27)
- Motorcyclist (27)
- Motorradfahrer (27)
- Efficiency (25)
- Anthropometric dummy (24)
- Dummy (23)
- Risiko (23)
- Vehicle occupant (23)
- Behaviour (22)
- Measurement (22)
- Verhalten (22)
- PKW (21)
- Pkw (21)
- Risk (21)
- Child (20)
- Improvement (20)
- Kind (20)
- Messung (20)
- Risikobewertung (20)
- Verbesserung (20)
- Brustkorb (19)
- Forschungsarbeit (19)
- Risk assessment (19)
- Seitlicher Zusammenstoß (19)
- Biomechanics (18)
- Biomechanik (18)
- Head (18)
- Kopf (18)
- Lorry (18)
- Motorrad (18)
- Rechenmodell (18)
- Sicherheitsgurt (18)
- Side impact (18)
- Alte Leute (17)
- Interview (17)
- Kompatibilität (17)
- Mathematical model (17)
- Motorcycle (17)
- Research project (17)
- Thorax (17)
- Benutzung (16)
- Compatibility (16)
- Development (16)
- Entwicklung (16)
- Old people (16)
- Prevention (16)
- Use (16)
- Berechnung (15)
- Deformation (15)
- Prognose (15)
- Safety belt (15)
- Accident rate (14)
- Auffahrunfall (14)
- Calculation (14)
- Leg (human) (14)
- Rear end collision (14)
- Transport infrastructure (14)
- Verformung (14)
- Airbag (13)
- Belastung (13)
- Database (13)
- Load (13)
- Unfallhäufigkeit (13)
- Bremsung (12)
- EU (12)
- Fahrzeugsitz (12)
- Fehler (12)
- Forecast (12)
- International (12)
- Lkw (12)
- Modification (12)
- Sensor (12)
- Standardisierung (12)
- Vehicle regulations (12)
- Überschlagen (12)
- Braking (11)
- Cost benefit analysis (11)
- Digital model (11)
- Error (11)
- Human factor (11)
- Interior (veh) (11)
- Menschlicher Faktor (11)
- Numerisches Modell (11)
- Research report (11)
- Schutzhelm (11)
- Seat (veh) (11)
- Technische Vorschriften (Kraftfahrzeug) (11)
- Verhütung (11)
- Verkehrsinfrastruktur (11)
- Verminderung (11)
- Veränderung (11)
- Wirtschaftlichkeitsrechnung (11)
- Antikollisionssystem (10)
- Bein (menschl) (10)
- Bemessung (10)
- Crash helmet (10)
- Decrease (10)
- Design (overall design) (10)
- Fahrzeuginnenraum (10)
- Gesetzgebung (10)
- Impact test (10)
- Krankenhaus (10)
- Legislation (10)
- Overturning (veh) (10)
- Politik (10)
- Tunnel (10)
- USA (10)
- Weather (10)
- Wirbelsäule (10)
- Age (9)
- Air bag (restraint system) (9)
- Alter (9)
- Autobahn (9)
- Automatisch (9)
- Collision avoidance system (9)
- Erste Hilfe (9)
- Fahranfänger (9)
- Fahrzeugführung (9)
- Front (9)
- Hospital (9)
- Japan (9)
- Knotenpunkt (9)
- Policy (9)
- Recently qualified driver (9)
- Standardization (9)
- Witterung (9)
- Automatic (8)
- Autonomous driving (8)
- Bridge (8)
- Brücke (8)
- Driver information (8)
- Driving (veh) (8)
- Drunkenness (8)
- Durability (8)
- Forschungsbericht (8)
- Fracture (bone) (8)
- Halswirbel (8)
- Knee (human) (8)
- Knochenbruch (8)
- Oberflächentextur (8)
- Perception (8)
- Shock (8)
- Surface texture (8)
- Technologie (8)
- Technology (8)
- Trunkenheit (8)
- Vereinigtes Königreich (8)
- Verkehrsteilnehmer (8)
- Wahrnehmung (8)
- Austria (7)
- Cervical vertebrae (7)
- Dauerhaftigkeit (7)
- Detection (7)
- Fahrstabilität (7)
- First aid (7)
- Human body (7)
- Impact sled (7)
- Impact study (7)
- Menschlicher Körper (7)
- Motorway (7)
- Norm (tech) (7)
- Ort (Position) (7)
- Road user (7)
- Schlag (7)
- Sichtbarkeit (7)
- Specification (standard) (7)
- Specifications (7)
- Spinal column (7)
- Straßenentwurf (7)
- Unterhaltung (7)
- Vehicle handling (7)
- Sichtbarkeit (7)
- Österreich (7)
- Adolescent (6)
- Aufprallschlitten (6)
- Ausrüstung (6)
- Automatische Notbremsung (6)
- Autonomes Fahren (6)
- China (6)
- Correlation (math, stat) (6)
- Deformierbare Barriere (Anpralltest) (6)
- Distraction (6)
- Driver training (6)
- Emission (6)
- Environment (6)
- Equipment (6)
- Fahrausbildung (6)
- Fahrerinformation (6)
- Fire (6)
- Highway design (6)
- India (6)
- Indien (6)
- Jugendlicher (6)
- Junction (6)
- Knie (menschl) (6)
- Location (6)
- Maintenance (6)
- Portugal (6)
- Probability (6)
- Reaction (human) (6)
- Reaktionsverhalten (6)
- Richtlinien (6)
- Road traffic (6)
- Schweden (6)
- Software (6)
- Steifigkeit (6)
- Stiffness (6)
- Surfacing (6)
- Vorn (6)
- Wahrscheinlichkeit (6)
- Wirksamkeitsuntersuchung (6)
- Abbiegen (5)
- Ablenkung (psychol) (5)
- Activity report (5)
- Analyse (Math) (5)
- Angle (5)
- Autonomous emergency braking (5)
- Bicycle (5)
- Body (car) (5)
- Classification (5)
- Condition survey (5)
- Damage (5)
- Deformable barrier (impact test) (5)
- Delivery vehicle (5)
- Detektion (5)
- Echtzeit (5)
- Eins (5)
- Einstellung (psychol) (5)
- Electronic stability program (5)
- Emergency (5)
- Ergonomics (5)
- Fahrrad (5)
- Fahrsimulator (5)
- Finite element method (5)
- Frau (5)
- Gefahrenabwehr (5)
- Gewicht (5)
- Intelligent transport system (5)
- Kamera (5)
- Karosserie (5)
- Kontrolle (5)
- Korrelation (math, stat) (5)
- LKW (5)
- Landstraße (5)
- Lebenszyklus (5)
- Lärm (5)
- Noise (5)
- Notfall (5)
- One (5)
- Post crash (5)
- Rehabilitation (5)
- Reproducibility (5)
- Reproduzierbarkeit (5)
- Rigid pavement (5)
- Rural road (5)
- Sachschaden (5)
- Schutzeinrichtung (5)
- Security (5)
- Simulator (driving) (5)
- Straßenverkehrsrecht (5)
- United Kingdom (5)
- Weight (5)
- Winkel (5)
- Zustandsbewertung (5)
- Abdomen (4)
- Absorption (4)
- Anti locking device (4)
- Attitude (psychol) (4)
- Betonstraße (Oberbau) (4)
- Bremse (4)
- Bus (4)
- Camera (4)
- Coefficient of friction (4)
- Collision test (veh) (4)
- Communication (4)
- Contact (tyre road) (4)
- Crashtest (4)
- Decision process (4)
- Decke (Straße) (4)
- Dynamics (4)
- Dynamik (4)
- Eigenschaft (4)
- Electric vehicle (4)
- Elektrofahrzeug (4)
- Elektronisches Stabilitätsprogramm (4)
- Enforcement (law) (4)
- Entscheidungsprozess (4)
- Erziehung (4)
- Estimation (4)
- Fahrdatenschreiber (4)
- Fahrgeschicklichkeit (4)
- Feuer (4)
- France (4)
- Frankreich (4)
- Frequency (4)
- Führerschein (4)
- Gesetzesdurchführung (4)
- Highway (4)
- In situ (4)
- Information (4)
- Klassifizierung (4)
- Kommunikation (4)
- Kraftfahrzeug (4)
- Medical aspects (4)
- Medizinische Gesichtspunkte (4)
- Messgerät (4)
- Methode der finiten Elemente (4)
- Occupant (veh) (4)
- Official approval (4)
- Organisation (4)
- Planning (4)
- Planung (4)
- Properties (4)
- Quality (4)
- Quality assurance (4)
- Qualität (4)
- Qualitätssicherung (4)
- Real time (4)
- Regression analysis (4)
- Regressionsanalyse (4)
- Rehabilitation (road user) (4)
- Reibungsbeiwert (4)
- Road construction (4)
- Road network (4)
- Safety fence (4)
- Schallpegel (4)
- Seite (4)
- Severity (acid (4)
- Sound level (4)
- Straße (4)
- Straßennetz (4)
- Surveillance (4)
- Sweden (4)
- Temperatur (4)
- Traffic (4)
- Traffic engineering (4)
- Traffic regulations (4)
- Umwelt (4)
- Unfallfolgemaßnahme (4)
- Unterleib (4)
- Verkehr (4)
- Wet road (4)
- Woman (4)
- Accuracy (3)
- Air pollution (3)
- Antiblockiereinrichtung (3)
- Apparatus (measuring) (3)
- Arzneimittel (3)
- Attention (3)
- Aufmerksamkeit (3)
- Bau (3)
- Bauwerksmonitoring (3)
- Bearing capacity (3)
- Befreiung (Bergung) (3)
- Bein (3)
- Beton (3)
- Blickfeld (3)
- Boden (3)
- Brake (3)
- Brücken Management System (3)
- Capacity (road, footway) (3)
- Carbon dioxide (3)
- Coach (3)
- Concrete (3)
- Construction (3)
- Cost (3)
- Crash Test (3)
- Crash test (3)
- Czech Republic (3)
- Data base (3)
- Deicing (3)
- Digitale Bildverarbeitung (3)
- Driving aptitude (3)
- Education (3)
- Effectiveness (3)
- Empfindlichkeit (3)
- Entdeckung (3)
- Ergonomie (3)
- Event data recorder (road vehicle) (3)
- Extrication (3)
- Fahrbahnüberquerung (3)
- Fahrtauglichkeit (3)
- Field of vision (3)
- Frequenz (3)
- Griffigkeit (3)
- Hinten (3)
- Information documentation (3)
- Intelligentes Transportsystem (3)
- Intersection (3)
- Jahreszeit (3)
- Kapazität (Straße) (3)
- Kleidung (3)
- Kontakt Reifen Straße (3)
- Korea (Süd) (Demokratische Republik) (3)
- Kosten (3)
- Kunststoff (3)
- Lenken (Fahrzeug) (3)
- Level of service (3)
- Lieferfahrzeug (3)
- Life cycle (3)
- Luftverunreinigung (3)
- Main road (3)
- Man (3)
- Mann (3)
- Medication (3)
- Medizinische Untersuchung (3)
- Mobility (3)
- Mobilität (3)
- Nasse Straße (3)
- Oberbau (3)
- Overlapping (3)
- Passenger (3)
- Pavement (3)
- Plastic material (3)
- Prototyp (3)
- Prototype (3)
- Rear (3)
- Reifen (3)
- Reisebus (3)
- Republic of Korea (3)
- Run off the road (accid) (3)
- Season (3)
- Sensitivity (3)
- Skidding resistance (3)
- Skill (road user) (3)
- Soil (3)
- Spain (3)
- Spanien (3)
- Steering (process) (3)
- Straßenverkehr (3)
- Structural health monitoring (3)
- Sustainability (3)
- Telematics (3)
- Telematik (3)
- Temperature (3)
- Theorie (3)
- Theory (3)
- Time (3)
- Traffic control (3)
- Traffic count (3)
- Tragfähigkeit (3)
- Trend (stat) (3)
- Tschechische Republik (3)
- Tyre (3)
- United kingdom (3)
- Unterfahrschutz (3)
- Verkehrserhebung (3)
- Verkehrsqualität (3)
- Verkehrssteuerung (3)
- Verschiebung (3)
- Versuchspuppe (3)
- Visual display (3)
- Vorne (3)
- Windschutzscheibe (3)
- Zeit (3)
- Abfluss (2)
- Abkommen von der Fahrbahn (Unfall) (2)
- Ablenkung (2)
- Abstandsregeltempomat (2)
- Accompanied driving (2)
- Adult (2)
- Advanced driver assistance system (2)
- Anthropmetric dummy (2)
- Asphaltstraße (Oberbau) (2)
- Auftaumittel (2)
- Australia (2)
- Australien (2)
- Autonomes Fahrzeug (2)
- Autonomous vehicle (2)
- Battery (2)
- Baumusterzulassung (2)
- Begleitetes Fahren (2)
- Behinderter (2)
- Beinahe Unfall (2)
- Bicyclist (2)
- Bildschirm (2)
- Blutkreislauf (2)
- Brand (2)
- Bremsweg (2)
- Bridge deck (2)
- Bridge management system (2)
- Bruch (mech) (2)
- Calibration (2)
- Circulation (blood) (2)
- Climate change (2)
- Clothing (2)
- Compliance (specif) (2)
- Comprehension (2)
- Compression (2)
- Continuous (2)
- Cooperative intelligent transport system (2)
- Crash victim (2)
- Cross roads (2)
- Crossing the road (2)
- Cycle track (2)
- Cycling (2)
- Data processing (2)
- Data transmission (telecom) (2)
- Datenbasis (2)
- Datenverarbeitung (2)
- Datenübertragung (telekom) (2)
- Dehnungsmessstreifen (2)
- Depth (2)
- Deterioration (2)
- Deutschalnd (2)
- Diesel engine (2)
- Digital image processing (2)
- Disablement (2)
- Dreidimensional (2)
- Driving licence (2)
- Driving license (2)
- Driving test (2)
- Droge (2)
- Drugs (2)
- EU directive (2)
- EU-Richtlinie (2)
- Edge (2)
- Eichung (2)
- Eindringung (2)
- Eingabedaten (2)
- Electric bicycle (2)
- Electronic driving aid (2)
- Elektrofahrrad (2)
- Energie (2)
- Energy (2)
- Environment protection (2)
- Erwachsener (2)
- Eu (2)
- Exhaust aftertreatment (2)
- Experience (human) (2)
- Expert system (2)
- Expertensystem (2)
- Fahrbahnmarkierung (2)
- Fahrbahntafel (2)
- Fahrprüfung (2)
- Fahrstreifen (2)
- Fahrzeugteil (Sicherheit) (2)
- Fernverkehrsstraße (2)
- Festigkeit (2)
- Foot (not a measure) (2)
- Form (2)
- Fuel consumption (2)
- Fuß (2)
- Führerscheinentzug (2)
- Geländefahrzeug (2)
- Genauigkeit (2)
- Gesetzesübertretung (2)
- Government (national) (2)
- Greenhouse effect (2)
- Grenzwert (2)
- Haftung (jur) (2)
- Harmonisation (2)
- Hazard (2)
- Head restraint (2)
- Headlamp (2)
- Heavy metal (2)
- In service behavior (2)
- Incident detection (2)
- Incident management (2)
- Input data (2)
- Interface (2)
- Italien (2)
- Italy (2)
- Klimawandel (2)
- Knie (2)
- Kohlendioxid (2)
- Kontakt Reifen-Straße (2)
- Kontinuierlich (2)
- Kopfstütze (2)
- Kreuzung (2)
- Langfristig (2)
- Layout (2)
- Learning (2)
- Leuchtdichte (2)
- Liability (2)
- Limit (2)
- Long term (2)
- Luminance (2)
- Market (2)
- Markt (2)
- Medical examination (2)
- Mensch Maschine Verhältnis (2)
- Methode der finite Elemente (2)
- Mittelwert (2)
- Mobile phone (2)
- Mobiltelefon (2)
- Model (not math) (2)
- Modell (2)
- Motorisierungsgrad (2)
- Movement (2)
- Nacht (2)
- Near miss (2)
- Netherlands (2)
- Network (traffic) (2)
- Niederlande (2)
- Night (2)
- Oberfläche (2)
- Offence (2)
- Offender (2)
- Organization (association) (2)
- Output (2)
- Parken (2)
- Parking (2)
- Pavement Management System (2)
- Pavement design (2)
- Pavement management system (2)
- Penetration (2)
- Pollutant (2)
- Posture (2)
- Public transport (2)
- Radfahren (2)
- Radio (2)
- Radweg (2)
- Rain (2)
- Rear view mirror (2)
- Recidivist (2)
- Recording (2)
- Regen (2)
- Regierung (staat) (2)
- Reinforcement (in mater) (2)
- Restraint system (2)
- Risk taking (2)
- Run off (2)
- Rundfunk (2)
- Rückfalltäter (2)
- Rückspiegel (2)
- Schadstoff (2)
- Schall (2)
- Scheinwerfer (2)
- Schutz (2)
- Schwermetall (2)
- Seat belt (2)
- Service area (2)
- Service life (2)
- Side (2)
- Sociology (2)
- Sound (2)
- Soziologie (2)
- Sport utility vehicle (2)
- Spreading (2)
- Stadt (2)
- Statistical analysis (2)
- Statistische Analyse (2)
- Stochastic process (2)
- Stochastischer Prozess (2)
- Strain gauge (2)
- Straßenbau (2)
- Strength (mater) (2)
- Stress (psychol) (2)
- Störfallentdeckung (2)
- Störfallmanagement (2)
- Surface (2)
- Tank Rast Anlage (2)
- Telefon (2)
- Telekommunikation (2)
- Telephone (2)
- Three dimensional (2)
- Tiefe (2)
- Toxicity (2)
- Toxizität (2)
- Traffic lane (2)
- Traffic restraint (2)
- Treibhauseffekt (2)
- Turn (2)
- Turning (2)
- Tyre tread (2)
- Tätigkeitsbericht (2)
- Umweltschutz (2)
- Underride protection (2)
- Unfallopfer (2)
- Untersuchung am unfallort (2)
- Urban area (2)
- Vehicle ownership (2)
- Vehicle safety device (2)
- Verkehrsbeschränkung (2)
- Verkehrsnetz (2)
- Verkehrstechnik (2)
- Verkehrsverflechtung (2)
- Verständnis (2)
- Verteilung (mater) (2)
- Wasser (2)
- Water (2)
- Windscreen (veh) (2)
- Zeitreihe (stat) (2)
- Zusammendrückung (2)
- Zusammenstoss (2)
- Öffentlicher Verkehr (2)
- Überlappung (2)
- (menschl) (1)
- Abgefahrener Reifen (1)
- Ability (road user) (1)
- Abkommen von der Fahrbahn (1)
- Abnutzung (1)
- Acceleration (1)
- Acceptability (1)
- Accessibility (1)
- Accident black spot (1)
- Accident proneness (1)
- Accident severity (1)
- Achslast (1)
- Active safety (1)
- Active safety system; Automatic; Brake; Car; Collision avoidance system; Conference; Driver assistance system; Germany; Impact test (veh); Rear end collision; Severity (accid (1)
- Adaptation (psychol) (1)
- Adaptive cruise control (1)
- Adaptive cruise controll (1)
- Administration (1)
- Advanced vehicle control systems (1)
- Aged people (1)
- Aggression (psycho) (1)
- Aggression (psychol) (1)
- Air quality management (1)
- Air traffic control (1)
- Air transport (1)
- Airbag (restraint system) (1)
- Aktive Sicherheit (1)
- Alcolock (1)
- Alternative (1)
- Analyse (1)
- Analyses (math) (1)
- Anhänger (1)
- Ankündigung (1)
- Anordnung (1)
- Anpassung (psychol) (1)
- Anthropometrie (1)
- Anthropometry (1)
- Antiblockiersystem (1)
- Antikollisisonssystem (1)
- Apparatus (measurement) (1)
- Arbeitsgruppe (1)
- Arm (human) (1)
- Arm (menschl) (1)
- Articulated vehicle (1)
- Asset Management (1)
- Asset management (1)
- Asset management system (1)
- Atives Sicherheitssystem (1)
- Audit (1)
- Auffharunfall (1)
- Aufzeichnung (1)
- Aufzeichung (1)
- Augenbewegungen (1)
- Ausdehnung (mater) (1)
- Automotive Engineering (1)
- Autonomous emerhency braking (1)
- Autotür (1)
- Average (1)
- Axle load (1)
- Back (human) (1)
- Batterie (1)
- Baustelle (1)
- Baustoff (1)
- Bauweise (1)
- Beanspruchung (1)
- Bein [menschl] (1)
- Belohnung (Anreiz) (1)
- Bemessung des Straßenoberbaus (1)
- Benchmark (1)
- Bepflanzung (1)
- Berechnung d Straßenoberbaus (1)
- Beschleunigung (1)
- Bestrafung (1)
- Bevölkerung (1)
- Bewehrung (1)
- Bindemittel (1)
- Binder (1)
- Bitumen (1)
- Bituminous mixture (1)
- Bituminöses Mischgut (1)
- Black ice (1)
- Blind spot (veh) (1)
- Blood alcohol content (1)
- Blutalkoholgehalt (1)
- Bone (1)
- Brake light (1)
- Braking distance (1)
- Breaking (1)
- Breite (1)
- Bremslicht (1)
- Bridges (1)
- Budget (1)
- Bumper (1)
- Cadaver (1)
- Car door (1)
- Car park (1)
- Carriageway (1)
- Carriageway marking (1)
- Catalytic converter (1)
- Cervical vertebrae; Conference; Evaluation (assessment); Injury; Spinal column; Test (1)
- Chassis (1)
- Chest (1)
- Clay (1)
- Coefficient (1)
- Cognitive impairment (1)
- Cold (1)
- Collisison avoidance system (1)
- Colthing (1)
- Compatiblity (1)
- Computation (1)
- Concentration (chem) (1)
- Conference; Germany; Injury; Medical examination; Spinal column; X ray (1)
- Confiscation (driving licence) (1)
- Confiscation (driving license) (1)
- Congestion (traffic) (1)
- Construction method (1)
- Construction site (1)
- Consumer protection (1)
- Contact (tyre (1)
- Control (1)
- Cooling (mater) (1)
- Correlation (1)
- Correlation (math (1)
- Cracking (1)
- Critical path method (1)
- Crossing the road (pedestrian) (1)
- Damping (1)
- Data basis (1)
- Data collection (1)
- Datenübertragung (Telekom) (1)
- Dauer (1)
- Day (24 hour period) (1)
- Daylight (1)
- Decke [Straße] (1)
- Deformable barrier (Impact test) (1)
- Deformable barrier system (impact test) (1)
- Deformierte Barriere (Anpralltest) (1)
- Demand (econ) (1)
- Demografie (1)
- Demography (1)
- Density (1)
- Detection response task (1)
- Deutschland ; Konferenz (1)
- Diagnostik (1)
- Dichte (1)
- Dieselmotor (1)
- Diffusion (1)
- Digital computer (1)
- Digitalrechner (1)
- Dimension (1)
- Dispersion (stat) (1)
- Displacement (1)
- Disstraction (1)
- Distribution (gen) (1)
- Drainage (1)
- Driver (veh) (1)
- Driver information system (1)
- Driving aid (electronic) (1)
- Dränasphalt (1)
- Dtetection (1)
- Durchsichtigkeit (1)
- Dynamic penetration test (1)
- Dynamo (1)
- Dämpfung (1)
- Earthworks (1)
- Economic efficiency (1)
- Economics of transport (1)
- Ejection (1)
- Elastizitätsmodul (1)
- Electronics (1)
- Elektronik (1)
- Elektronische Deichsel (1)
- Elektronisches Stabilitätsprogram (1)
- Emergency medical aid (1)
- Engine capacity (1)
- Enteisung (1)
- Entgleisung (Zug) (1)
- Entwässerung (1)
- Erdarbeiten (1)
- Erfahrung (menschl) (1)
- Ermüdung (mater) (1)
- Ersatzfahraufgabe (1)
- European New Car Assessment Programme (1)
- Evaluation (Assessment) (1)
- Event data recorder (Road vehicle) (1)
- Expansion (1)
- Experimental road (1)
- Expert interview (1)
- Expressway (1)
- Eye movement (1)
- Face (human) (1)
- Facility (1)
- Fahrassistenzsystem (1)
- Fahrbahn (1)
- Fahrdynamik (1)
- Fahrererfahrung (1)
- Fahrerinformationen (1)
- Fahrerinformationssystem (1)
- Fahrleistung (1)
- Fahrstreifenwechsel (1)
- Fahrwerk (1)
- Fahrzeugbeleuchtung (1)
- Fahrzeugdach (1)
- Fahrzeugflotte (1)
- Fahrzeugrückhaltesystem (1)
- Fahrzeugsicherheit (1)
- Failure (1)
- Fatigue (human) (1)
- Fatigue (mater) (1)
- Fear (1)
- Fein (mater) (1)
- Feinstaub (1)
- Fence (1)
- Fernverkehrsstrasse (1)
- Field test (1)
- Financing (1)
- Finanzierung (1)
- Fine (mater) (1)
- Finland (1)
- Finnland (1)
- Fleet of vehicles (1)
- Flexible pavement (1)
- Flooding (1)
- Flugsicherung (1)
- Freeway (1)
- Freight transport (1)
- Friction (1)
- Fuel tank (1)
- Fuge (1)
- Fugenfüllung (1)
- Functional safety (1)
- Funktionale Sicherheit (1)
- Furcht (1)
- Future transport mode (1)
- Fußgängerbereich (1)
- Führerschein Punktesystem (1)
- Gap acceptance (1)
- Gas (1)
- Gefahr (1)
- Gelenkfahrzeug (1)
- Geografisches Information System (1)
- Geographical information system (1)
- Geomembran (1)
- Geomembrane (1)
- Geometry (shape) (1)
- Geotextil (1)
- Geotextile (1)
- Geradeausverkehr (1)
- Geschwindigkeitsbeschränkung (1)
- Gesicht (1)
- Gestaltung (1)
- Gesundheit (1)
- Glatteis (1)
- Great Britain (1)
- Grenzfläche (1)
- Ground water (1)
- Group analysis (test) (1)
- Großbritannien (1)
- Grundwasser (1)
- Güterverkehr (1)
- Harmonisierung (1)
- Harmonization (1)
- Head (human) (1)
- Health (1)
- Hearing (1)
- Height (1)
- Herausschleudern (1)
- Herstellung (1)
- Higway design (1)
- Hip (human) (1)
- Homogeneity (1)
- Homogenität (1)
- Hospitsl (1)
- Hubraum (1)
- Häufigkeit (1)
- Höhe (1)
- Hörvermögen (1)
- Hüfte (1)
- Hüfte (menschl) (1)
- Illness (1)
- Image analysis (1)
- Image generation (1)
- Image processing (1)
- Immission (1)
- Impact (collision) (1)
- Impact test (crash) (1)
- In Bewegung (1)
- Increase (1)
- Inertia reel safety belt (1)
- Infotainment System (1)
- Infotainment system (1)
- Injury) (1)
- Installation (1)
- Intelligentes Transport System (1)
- Intelligentes Verkehrssystem (1)
- Interactive model (1)
- Interaktives Modell (1)
- Inventar (1)
- Inventory (1)
- Ireland (1)
- Irland (1)
- Itinerary (1)
- Jahr (1)
- Joint (structural) (1)
- Klassifikation (1)
- Kleintransporter (1)
- Knochen (1)
- Koeffizient (1)
- Kognitive Aufgabenanforderung (1)
- Kognitive Beeinträchtigung (1)
- Kolmatierung (1)
- Kompatiblität (1)
- Konzentration (1)
- Kopf (menschl) (1)
- Korea (Süd) (1)
- Korn (1)
- Kornverteilung (1)
- Korrelation (math (1)
- Korrelation [math (1)
- Korrelation(Math (1)
- Kosten Nutzen Vergleich (1)
- Kraftstofftank (1)
- Kraftstoffverbrauch (1)
- Krankheit (1)
- Kreisverkehrsplatz (1)
- Kälte (1)
- Körperhaltung (1)
- Körperstellung (1)
- Kühlung (mater) (1)
- Laboratorium (1)
- Laboratory (not an organization) (1)
- Laborexperiment (1)
- Lane changing (1)
- Lap strap (1)
- Laser (1)
- Lateral (1)
- Lateral collision (1)
- Layer (1)
- Lebensdauer (1)
- Left turn (1)
- Leichnam (1)
- Leistungsfähigkeit (Allg.) (1)
- Length (1)
- Lernen (1)
- Lifecycle (1)
- Links (1)
- Literaturanalyse (1)
- Literature review (1)
- Luftreinhaltung (1)
- Lufttransport (1)
- Länge (1)
- Lärmschutzwand (1)
- Maintenance management (1)
- Malaysia (1)
- Man-machine interface (1)
- Manufacture (1)
- Massenunfall (1)
- Material (constr) (1)
- Materialveraenderung (allg) (1)
- Materialveränderung (allg) (1)
- Mathematical Model (1)
- Matrix (1)
- Mean (math) (1)
- Mensch-Maschine-Interaktion (1)
- Mensch-Maschine-Schnittstelle (1)
- Merging (1)
- Merging traffic (1)
- Text (1)
- Mesurement (1)
- Metal bridge (1)
- Mix design (1)
- Modulus of elasticity (1)
- Montage (1)
- Moped (1)
- Motor (1)
- Moving (1)
- Multiple collision (1)
- Müdigkeit (1)
- Nachfrage (1)
- Nachhaltige Entwicklung (1)
- Nachhaltigkeit (1)
- Nachricht (1)
- Nasse Strasse (1)
- Netzplantechnik (1)
- Neural network (1)
- Neuronales Netz (1)
- Nigeria (1)
- Nitric acid (1)
- Nitrogen oxide (1)
- Noise barrier (1)
- Non destructive testing (1)
- Nordamerika (1)
- North America (1)
- Norway (1)
- Norwegen (1)
- Nummer (1)
- Nutzwertanalyse (1)
- OECD (1)
- Occupant (1)
- Offset impact test (1)
- On the left (1)
- On the right (1)
- On the scene accident investigation (1)
- On the spot investigation (1)
- Optimum (1)
- Optische Anzeige (1)
- Organization (1)
- Orthotrope Platte (1)
- Orthotropic plate (1)
- Overtaking (1)
- Overturning (1)
- Oxygen (1)
- Ozon (1)
- Ozone (1)
- PVC (1)
- Padding (safety) (1)
- Parkfläche (1)
- Particle (1)
- Particle size distribution (1)
- Particulate matter (1)
- Partnerschaft (1)
- Partnership (1)
- Peak hour (1)
- Peat (1)
- Pedestrian precinct (1)
- Pelvis (1)
- Penalty (1)
- Personal (1)
- Personnel (1)
- Pfahl (1)
- Pfosten (1)
- Pile (1)
- Platooning (electronic) (1)
- Platte (1)
- Point demerit system (1)
- Poland (1)
- Pole (1)
- Polen (1)
- Police (1)
- Politics (1)
- Polizei (1)
- Pollution (1)
- Pollution concentration (1)
- Polyvinylchloride (1)
- Population (1)
- Porous asphalt (1)
- Portable (1)
- Position (1)
- Pregnancy (1)
- Preloading (soil) (1)
- Prestressed (1)
- Prestressed concrete (1)
- Probe (1)
- Productivity (1)
- Protective helmet (1)
- Provisorisch (1)
- Prüefverfahren (1)
- Pssives Sicherheitssystem (1)
- Psychological aspects (1)
- Psychologische Gesichtspunkte (1)
- QAccident (1)
- Quality management system (1)
- Qualitätsmanagementsystem (1)
- Rail bound transport (1)
- Rail traffic (1)
- Rammsondierung (1)
- Reaction (chem.) (1)
- Reaktion (chem) (1)
- Real-time (1)
- Rechts (1)
- Rechtsübertreter (1)
- Rechtübertreter (1)
- Reconstruction [accid] (1)
- Reduction (decrease) (1)
- Reflectivity (1)
- Reflectorized material (1)
- Reflexionsgrad (1)
- Reflexstoffe (1)
- Regional planning (1)
- Regionalplanung (1)
- Rehabilitation (Road user) (1)
- Reibung (1)
- Reifenprofil (1)
- Reinforcement (1)
- Reiseweg (1)
- Republic of Corea (1)
- Research (1)
- Research projekt (1)
- Residential area (1)
- Resilience (1)
- Resilienz (1)
- Resuscitation (1)
- Reversing (veh) (1)
- Reward (1)
- Rib (1)
- Richtlinie (1)
- Rinanalyse (1)
- Rippe (menschl) (1)
- Risikoverhalten (1)
- Rissbildung (1)
- Road (1)
- Road Construction (1)
- Road construction site (1)
- Road heating (1)
- Road marking (1)
- Road transport (1)
- Roadbase (1)
- Roadside (1)
- Robot (1)
- Roboter (1)
- Roll over (veh) (1)
- Rolling resistance (1)
- Rollwiderstand (1)
- Roof (veh) (1)
- Rotation (1)
- Roundabout (1)
- Rsk (1)
- Rupture (1)
- Röntgenstrahlung (1)
- Rücken (1)
- Rücksichtslosigkeit (1)
- Rückwärtsfahren (1)
- SAE Level (1)
- Safety glass (1)
- Safety harness (1)
- Safety system (1)
- Saftey (1)
- Salpetersäure (1)
- Sample (mater) (1)
- Sample (stat) (1)
- Sauerstoff (1)
- Schicht (1)
- Schienentransport (1)
- Schienenverkehr (1)
- Schleudertrauma (1)
- Schnittstelle (1)
- Schulter (1)
- Schwangerschaft (1)
- Schweiz (1)
- Schweregrad (UNfall (1)
- Schweregrad (Unfall, Verletzung (1)
- Schweregrad /Unfall (1)
- Schätzung (1)
- Sealing compound (1)
- Seat (1)
- Seat harness (1)
- Sensors (1)
- Settlement (1)
- Setzung (1)
- Severity (accid, injuy) (1)
- Shape (1)
- Shoulder (human) (1)
- Sicherheitsglas (1)
- Sicherheitspolsterung (1)
- Significance (1)
- Signifikanz (1)
- Silting (1)
- Size and weight regulations (1)
- Slab (1)
- Social factors (1)
- Soziale Faktoren (1)
- Spannbeton (1)
- Specification (standard ) (1)
- Spectrum (1)
- Speed limit (1)
- Speed) (1)
- Spektrum (1)
- Spinal calum (1)
- Sri Lanka (1)
- Stadardization (1)
- Stadtplanung (1)
- Staggered junction (1)
- Stahl (1)
- Stahlbrücke (1)
- Stand der Technik (Bericht) (1)
- Standard (1)
- Standard test run (1)
- Standardabweichung (1)
- Stapedius reflex (1)
- Stapediusreflex (1)
- Stat) (1)
- State of the art report (1)
- Statistik (math) (1)
- Steel (1)
- Stichprobe (1)
- Stickoxid (1)
- Stopping distance (1)
- Stoßstange (1)
- Straight ahead (traffic) (1)
- Strasse (1)
- Straßenheizung (1)
- Straßenseitenfläche (1)
- Straßentransport (1)
- Strength ; Tension (1)
- Stress (1)
- Stress (psycho) (1)
- Subsoil (1)
- Surrogate driving set-up (1)
- Switzerland (1)
- Systemanalyse (1)
- Systems analysis (1)
- Tactile perception (1)
- Tag (24 Stunden) (1)
- Tageslicht (1)
- Taktiles Signal (1)
- Technische Vorschriften (1)
- Telecommunication (1)
- Telecomunication (1)
- Temperature measurement (1)
- Temperaturmessung (1)
- Temporary (1)
- Tension (1)
- Terrorism (1)
- Terrorismus (1)
- Test procedure (1)
- Thailand (1)
- Ton (Gestein) (1)
- Torf (1)
- Toter Winkel (1)
- Town planning (1)
- Tracking task (1)
- Trackingaufgabe (1)
- Traffic Engineering (1)
- Traffic concentration (1)
- Traffic regulation (1)
- Tragbar (1)
- Tragschicht (1)
- Train (1)
- Transparent (1)
- Transport (1)
- Transport mode (1)
- Transport operator (1)
- Transportunternehmen (1)
- Traveler (1)
- Two dimensional (1)
- Typenzulassung (1)
- Underride prevention (1)
- Unfallfolgephase (1)
- Unfallneigung (1)
- Unfallrate (1)
- Unfallrekonsruktion (1)
- Unfallschwerpunkt (1)
- Unfallverhuetung (1)
- Unfallverhütug (1)
- Ungeschützter Verkehrsteilnehmer (1)
- United Kindom (1)
- Untergrund (1)
- Untersuchung am Umfallort (1)
- Usa (1)
- Value analysis (1)
- Variable message signs (1)
- Variance analysis (1)
- Varianzanalyse (1)
- Vegetation (1)
- Vehicle lighting (1)
- Vehicle mile (1)
- Vehicle regulation (1)
- Vehicle restraint system (1)
- Vehicle safety (1)
- Veletzung) (1)
- Veraenderung (1)
- Verbraucherschutz (1)
- Vereinigtes Königreichl (1)
- Verfahen (1)
- Verfahren ; Verkehrsinfrastruktur (1)
- Vergrößerung (1)
- Verkehrsmittel (1)
- Verkehrsspitze (1)
- Verkehrsstauung (1)
- Verkehrsstärke (1)
- Verkehrswirtschaft (1)
- Vermeidung (1)
- Verschmutzung (1)
- Versetzte Kreuzung (1)
- Verstärkung (1)
- Verstärkung (Brücke) (1)
- Versuchsstrecke (1)
- Verteilung (allg) (1)
- Verwaltung (1)
- Vibration (1)
- Video camera (1)
- Virtual reality (1)
- Virtuelle Realität (1)
- Viskosity (1)
- Viskosität (1)
- Visualisation (1)
- Visualisierung (1)
- Vorbelastung (Boden) (1)
- Vorspannung (1)
- Vulnerable road user (1)
- Warning (1)
- Wear (1)
- Wechselverkehrszeichen (1)
- Wetter (1)
- Whiplash injury (1)
- Width (1)
- Wind (1)
- Window (veh) (1)
- Winter (1)
- Wirkungsanalyse (1)
- Wirtschaftlichkeit (1)
- Wohngebiet (1)
- Women (1)
- Working group (1)
- Year (1)
- Zahl (1)
- Zeitlückenakzeptanz (1)
- Zerstörungsfreie Prüfung (1)
- Zug (Eisenbahn) (1)
- Zug (mech) (1)
- Zugänglichkeit (1)
- Zukünftiges Verkehrsmittel (1)
- Zulassung (tech) (1)
- Zusammensetzung (1)
- ZusammenstoÃüï-¿-½Ãƒ-¯Ã‚-¿Ã‚-½ (1)
- Zweidimensional (1)
- accident (1)
- aktives Sicherheitssystem (1)
- analyses (math) (1)
- ar (1)
- driving dynamics (1)
- efficiency (1)
- fatality (1)
- finite element method (1)
- head (1)
- human-machine interaction (1)
- road) (1)
- simulation (1)
- stat) (1)
- stat] (1)
- trailer (1)
- tödlicher Unfall (1)
- vehicle safety (1)
- Überdeckung (1)
- Überholen (1)
- Überschwemmung (1)
Institut
- Sonstige (337)
- Abteilung Fahrzeugtechnik (126)
- Abteilung Verhalten und Sicherheit im Verkehr (23)
- Abteilung Brücken- und Ingenieurbau (22)
- Abteilung Straßenverkehrstechnik (22)
- Abteilung Straßenbautechnik (17)
- Präsident (9)
- Stabstelle Presse und Öffentlichkeitsarbeit (6)
- Stabstelle Forschungscontrolling, Qualitätsmanagement (1)
Cycling and designing for cyclist in Germany: an overview of road safety, research and guidelines
(2016)
Cycling is considered a social, eco-friendly, pollution-free, low noise and healthy activity and mode of transportation. There are currently around 67 million bicycles in Germany. This number is expected to increase in the near future with greater use of electromotive assisted bicycles. Regarding the expected increase, there should be additional attention given to road traffic accidents involving cyclists. In 2014, 396 cyclists were killed in road accidents in Germany, which is 12 % of all road fatalities. Also in 2014, Germany reported over 78,000 injuries to cyclists. The majority of the fatalities (about 58 %) and 83 % of the serious injuries to cyclists occurred in urban areas. This paper will examine three aspects concerning cyclists. First, the paper will show the main current developments, for example the National Cycling Plan 2020, the effects of the road safety programme and provide an analysis of the German national accident statistics. Second, the paper will give an overview of the regulations, guidelines for road traffic and designing of cycling facilities. Lastly, this study will detail the current and completed research in Germany addressing cyclist. For example, the paper will discuss the topic "Accidents between Turning-off Trucks and Cyclists" Accidents between right turning trucks and straight riding cyclists often show massive consequences. Accident severity is much higher than in other accidents. The situation is critical especially due to the fact that, in spite of the six mirrors that are mandatory for ensuring a minimum field of sight for the truck drivers, cyclists in some situations cannot be seen or are not seen by the driver. Either the cyclist is overlooked or is in a blind spot area that results from the turning manoeuvre of the truck. At present driver assistance systems are discussed that can support the driver in the turning situation by giving a warning when cyclists are riding parallel to the truck just before or in the turning manoeuvre. The paper will describe the requirements for turning assist systems for trucks. The outcome of the study is an overview of the accident situation between right turning trucks and straight driving cyclists in Germany as well as a corresponding test procedure for driver assistance systems. Below are several other projects which will be investigated, too: Accident Risk and Acceptance of Traffic-Rules by Cyclists ; Safety Improvement in Terms of Using Bicycle Paths in the Opposite Direction ; Cycling in Mixed-Traffic ; Observation of Pedal Electric Cycles Riders to Identify Safety Concerns. These three aspects will provide the current situation on the topic of cyclist safety in Germany.
The primary goal of this investigation was to determine the relative risk of traffic accidents in students. In a two year period, a survey amongst 2,325 students was carried out, and 3,645 injuries sustained by students treated at our hospital were analyzed. Moped-riding in adolescents were associated with a 23.75-fold increased risk for injury as compared to biking. Children who ride bicycles have a 2.2-fold increased risk for an injury sustained by traffic accidents compared to pedestrians. None of 50 injured bicycle riders with helmet had an AIS for head injuries of more than 2. 24 of 233 injured bicycle drivers without helmet had an AIS for head injuries of more than 2. The use of a protective helmet significantly reduced the severity of head injuries. The level of awareness towards danger and a history of previous accidents correlate with the likelihood of future accidents. Due to the severity of traffic accidents, more adequate prevention measures (wearing of bicycle helmets and better education for moped riders) are urgently needed.
To date, the Trauma Registry (TraumaRegister DGU-® contains data of approximately 100.000 severely injured patients, 65% of which suffered from a road traffic crash. Thus, it is the world's largest data base for severely injured patients. The article describes the development of the registry and explains how it was rolled out over Germany using the established structure of the German Trauma Network (TraumaNetzwerk DGU-®). In addition, this article presents three typical use cases from the fields of quality management, policy making and system-wide interventions, clinical research and injury prevention. In conclusion, the TraumaRegister DGU-® is a well-established tool for various purposes related to the control and reduction of the burden of road injury. Its ongoing expansion to other countries will support the goal of international benchmarking of hospitals and trauma systems.
High demands on exhaust emissions of passenger cars and light commercial vehicles require complex technologies. The three-way catalytic converter is an essential part of state of the art emission control systems. If a catalytic converter is damaged or its effectiveness deteriorates, it can be replaced by a replacement converter. Replacement catalytic converters from the aftermarket are approved on the basis of Regulation No 103 of the UNECE - United Nations Economic Commission for Europe. According to this regulation the replacement catalytic converter shall be designed, constructed and capable of being mounted so as to enable the vehicle to comply with the provisions taken as a basis for its type approval. Furthermore the pollution emissions must be effectively limited throughout the entire normal service life of the vehicle under normal operating conditions. In the context of the research project, the durability of replacement catalytic converters was examined. A VW Golf with emission standard Euro 4, 1.4 l petrol engine (55 kW) was selected as a test vehicle. At the start of the examinations, the vehicle showed a mileage of 75,000 km. The selected vehicle was regularly serviced in accordance with the manufacturer's specifications. No emission-relevant faults were recorded by the OBD system. The initial control measurement of the vehicle in as-delivered condition with the originally installed catalytic converter showed that the corresponding emissions of the regulated pollutants were considerably below the Euro 4 emission limits to be applied. Subsequently, an original replacement catalytic converter, which was purchased from an authorised dealer, and 4 catalytic converters purchased in the independent aftermarket, were examined. The replacement catalytic converters were conditioned according to the specifications of ECE Regulation No 103 and then measured in new condition. The catalytic converters were then aged on a burner test rig. Here a total mileage of 80,000 km was simulated. After 10,000 km and 40,000 km, the ageing was interrupted and the exhaust gas emissions of the test vehicle with the aged catalytic converters were measured. The examination was ended as soon as a limit value had been exceeded. The results of the project indicate that with the replacement systems for the after-treatment of exhaust gases available in the independent aftermarket, considerable quality differences can occur. At the end of the ageing over a distance of 80,000 km only the original replacement catalytic converter and one replacement catalytic converter from the independent aftermarket complied with the Euro 4 emission limits. With one replacement catalytic converter, the Euro 4 emission limits were already exceeded in new condition. With another replacement catalytic converter, the examination was aborted after 10,000 km ageing and with a further catalytic converter after 40,000 km ageing due to the Euro 4 emission limits being exceeded. The ECE Regulation No 103 provides for a test of durability of such systems over 80,000 km, but also alternatively enables the use of fixed deterioration factors. In practice, the durability of the replacement systems for the after-treatment of exhaust gases is guaranteed by their manufacturers. However, replacement catalytic converters are rarely inspected as part of the approval. In-use compliance provisions for replacement systems for the after-treatment of exhaust gases are not mentioned in the corresponding specifications. The results of this study indicate that the requirements in the ECE Regulation No 103 are not adequate to ensure the durability of replacement catalytic converters.
Mobility plays an important role in the Federal Republic of Germany. Motorised private transport and, consequently, passenger vehicles are the crucial factor. Vehicles should be environmentally and socially compatible yet also economically efficient at the same time. The crucial factor for pollution of the environment from road traffic is the exhaust emissions of the vehicles on the road. This is why, with the Directive 98/69/EC and the related introduction of exhaust emission standard Euro 3, the testing of the conformity of passenger and light commercial vehicles (in-service conformity check) was introduced. Vehicles already on the roads are to be examined again under type examination conditions (Type I Test) after a statistical selection process. In this way it is to be ensured that the systems and components relevant for the exhaust emissions of a vehicle will also function after several thousand kilometres. This is why the vehicles are checked again during in-service conformity check with respect to their limited pollution components. Due to the ever greater significance of CO2 emissions, both the CO2 emissions and the fuel consumption were included in this research project. For the success of such a project the choice of vehicle is of critical importance. Since this is the only way it is possible to also obtain a representative result. Therefore, in addition to the selection criteria required by law, statistical and technical criteria are also considered. The vehicle owners were selected on a random basis. All test vehicles were checked with respect to their pollutant components in the emissions laboratory in accordance with their standard. By law the same testing conditions apply in an in-service conformity check as in the relevant type approval. In this research project a total of 17 vehicle types were examined. Six types were equipped with positive-ignition engines and 11 types with compression ignition engines. Both groups were to each include vehicles of the limits Euro 4 and Euro 5. For vehicle types with positive-ignition engines, there was one type with the exhaust emission standard Euro 5. All others satisfied the exhaust emission standard Euro 4. For the vehicle types with compression ignition engines, 4 types satisfied exhaust emission standard Euro 5 and 7 types fulfilled exhaust emission standard Euro 4. Among the vehicle types with compression ignition and exhaust emission standard Euro4, there were 4 types of category M1 and 3 types of category N1 of class III. The aim of the research project is to examine the exhaust emissions in-service conformity of passenger and light commercial vehicles in operation to draw conclusions concerning the durability of engine components and systems for exhaust emission treatment. Overall in this in-service conformity testing programme, we were able, in accordance with the statistical procedure, to assess all 17 of the vehicle types tested as "positive". With the exception of one vehicle type, it was possible to conclude the random test for all vehicle types tested with the minimum random sample. This means that all 3 vehicles of one type in as-delivered condition complied with or fell below the respective limits for pollutant emissions according to the criteria of the statistical procedure. In the case of one vehicle type, where the random sample had to be enlarged, it was necessary to examine a total of 8 vehicles. Furthermore, with all vehicle types the CO2-emissions and fuel consumption (Type I Test) were determined to subsequently compare the measured CO2 emissions with those of the manufacturers. Of the 17 vehicle types examined, eleven vehicle types complied with the relevant manufacturers" values or fell below them. With six vehicle types, the CO2 emissions were more than the permissible 4% above the manufacturer- value during the Type I Test.
Camera-monitor systems (CMS) can be used in motor vehicles to display the driver's rear view on a monitor mounted inside the vehicle. This also offers the possibility of replacing conventional exterior mirrors with suitable CMS and thereby implementing new design concepts with aerodynamic advantages. However, as exterior mirrors are safety-relevant vehicle parts for securing the driver's indirect rear view (requirements specified in UN Regulation No. 46), the question arises whether CMS can provide an equivalent substitute for mirrors. In the scope of this study, CMS and conventional exterior mirrors were compared and assessed in test drives and static tests under different external conditions. On the one hand, the examination of technical aspects, and on the other hand, issues pertaining to the design of the human-machine interaction, were the objects of the study. Two vehicles were available for the trials with passenger vehicles: A vehicle, manufactured in small series, which is already equipped with CMS as sole replacement for the exterior mirrors, as well as a compact class vehicle which had a CMS retrofitted by the car manufacturer in addition to conventionally used exterior mirrors. The latter could be covered exclusively for trips with CMS. A tractor unit with semitrailer was available for the truck trials. The driver's cabin was equipped with a CMS system developed by the vehicle manufacturer. In general, it was shown that it is possible to display the indirect rear view sufficiently for the driver, both for cars and trucks, using CMS which meet specific quality criteria. Depending on the design, it is even possible to receive more information about the rear space from a CMS than is possible with mirror systems. It was also shown that the change from mirrors to CMS requires a certain period of familiarisation. However, this period is relatively short and does not necessarily result in safety-critical situations.
Within the automotive context camera monitor systems (CMS) can be used to present views of the traffic situation behind the vehicle to the driver via a monitor mounted inside the cabin. This offers the opportunity to replace classical outside rearview mirrors and therefore to implement new design concepts, aerodynamically optimized vehicle shapes and to reduce the width of the vehicle. Further, the use of a CMS offers the potential to implement functionalities like warnings or situation-adaptive fields of view that are not feasible with conventional rearview mirrors. Despite these potential advantages, it is important to consider the possible technical constraints of this technology and its effect on driver perception and behavior. On the technical side next to the field of view and die robustness of die system, aspects as its functionality at day and night as well as under varying weather conditions should be object to scientific investigation. Concerning human machine interaction, it has to be considered, that the perception of velocities and distances of approaching vehicles might be different for CMS as compared to conventional rearview mirrors and potential influences of factors as the Position of the displays or drivers' age should be taken into account. In order to shed light on these and further open issues, BASt is currently conducting a study that will cover the use of CMS under controlled conditions as well in real traffic. The first part of the study will focus on passenger cars, while in a second step the empirical investigation will be extended to heavy goods vehicles, where the potentials as well as the limitations of CMS might differ considerably. The presentation will cover the first part, with regard to the experimental design, implementation and initial results if already available.
Methods for analyzing the efficiency of primary safety measures based on real life accident data
(2009)
Primary safety measures are designed to help to avoid accidents or, if this is not possible, to stabilize respectively reduce the dynamics of the vehicle to such an extent that the secondary safety measures are able to act as good as possible. The efficiency of a primary safety measure is a criterion for the effectiveness, with which a system of primary safety succeeds in avoiding or mitigation the severity of accidents within its range of operation and in interactionwith driver and vehicle. Based on Daimler-´s philosophy of the "Real Life Safety" the reflection of the real world accidents in the systems range of operation is both starting point as well as benchmark for its optimization. This paper deals with the methodology to perform assessments of statistical representative efficiency of primary safety measures. To be able to carry out an investigation concerning the efficiency of a primary safety measure in a transparent and comparable way basic definitions and systematics were introduced. Based on these definitions different systematic methods for estimating efficiency were discussed and related to each other. The paper is completed by presenting an example for estimating the efficiency of actual "single" and "multi" connected primary safety systems.
This paper presents findings of a laboratory experiment which aimed at evaluating the sensitivity and intrusiveness of Tactile Detection Response Task (TDRT) methodology. Various single-task, dual-task and triple-task scenarios were compared. The task scenarios included a surrogate of driving (tracking task) and different secondary tasks (N-back, surrogate reference task (SuRT)). The results suggest that the TDRT is sensitive to load levels of secondary tasks which primarily demand for cognitive resources (N-back). Sensitivity to variations of visual"manual load could not be shown (SuRT). TDRT seems also to be able to differentiate between modes of primary task which varies in terms of cognitive load (visual against auditory tracking task). Results indicated intrusiveness of TDRT on primary task performance and secondary task performance depending on the type of underlying task scenario. As a conclusion, TDRT can be recommended as a method to assess attentional effects of cognitive load of a secondary task, but should be used with caution for secondary tasks with strong motor demands.
This paper describes the methodology for the assessment of the socio-economic impact of SAFESPOT applications. The applications selected for the assessment cover vehicle to vehicle (v2v) as well as vehicle to infrastructure (v2i) communication systems. The applications address main problem areas of road safety: accidents at intersections, accidents due to hazardous road and weather conditions and accidents due to over speeding and inappropriate distance. The assessment methodology relies in its core on cost-benefit analysis (CBA) as the most widespread tool to assess the profitability of applications form the society point of view. The assessment is however not limited to CBA but also considers the economic effects for particular stakeholder groups such as users, public authorities and the like. Their individual cost and benefits can be investigated in stakeholder analyses. Both elements, CBA and stakeholder analysis, form an integrated assessment approach which is applied here. The assessment makes use of the sound methodological base which was provided by projects such as SEiSS and eIMPACT. Some characteristics of co-operative systems however call for special attention within the assessment. Most prominently, the assessment will concentrate on a bundle of applications. The impact of this bundle will be assessed under the conditions of different business and service models. These issues will be addressed in the paper. Moreover, this paper also provides insight in likely patterns of results and first results of socio-economic impact assessment itself.
This report presents the results of a stakeholder analysis which has been performed by the EasyWay Cooperative Systems Task Force. The stakeholder analysis aims at identifying potential roles of the road operator in the operation process of selected cooperative services and describing expectations and aspirations related to the future roles and responsibilities from a European road operator- point of view. The following cooperative services have been considered in the stakeholder analysis: Hazardous location notification, Traffic jam ahead warning, Road works warning, Automatic access control and Parking management. The stakeholder analysis used findings from previous projects and performed own studies based on desk research and expert assessments which were carried out by the task partners. The approach includes the development of high-level descriptions showing functional schemes of the operational process chains and potential roles / responsibilities related to the road operator. A deepened analysis was performed by assessing the functional schemes / role profiles and collecting opportunities, concerns, and success factors from a road operator- perspective.
Relevant accident related factors : risk and frequencies of contributing to road traffic accidents
(2009)
In the course of the European Project TRACE (Traffic Accident Causation in Europe) an attempt was made to analyse the cause of road traffic accidents from a factors' point of view. By literature review the most important independent risk factors for traffic accidents were identified to be speed, alcohol intake, male gender, young age, cell phone use, and fatigue. However, the impact of an accident related factor also depends on its prevalence in traffic and accidents, respectively. Available to the Partners in the TRACE Project were different accident databases. Causally contributing factors found by accident investigations that are most often coded in accident databases are connected to unadapted speed and inattention. Taking into account the risk increase and the frequency of contribution to accidents the conclusion can be drawn that the most relevant factors for accident causation are: "alcohol", "speed", and "inattention and distraction".
Females sustain Cervical Spine Distortion injury (CSD) more often than males. Most work dealing with the biomechanics background (e.g. injury mechanism/criteria) as well as the application in seat design/testing, focuses on the occupant model of an average male. Therefore the EU-Project ADSEAT (Adaptive Seat to Reduce Neck Injuries for Female and Male Occupants) is aimed at adding a female model for gender balanced research of CSD and improving seat design. An extensive literature review, searching for risk factors and injury criteria for males and females, was accompanied by the evaluation of different databases containing CSD cases. The database evaluations suggests that an anthropometry quite close to the 50%ile female anthropometry as known from crash test dummy design is appropriate. The results presented here form the basis for the future development of a computational female model and the improvement of seat design for better protection of both males and females in the frame of the ADSEAT-Project.
In the course of the EUROPEAN PROJECT TRACE all fatally injured pedestrians autopsied at the Institute for Legal Medicine in Munich in 2004 had been analysed by using the "Human Functional Failure (HFF) analysis" method. It was possible to apply this method although some restrictions have to be taken into account. The results derived from this analysis comprise first the failures the pedestrians (most often "impairment of sensorimotor and cognitive abilities") and the opponents (most often " Non-detection in visibility constraints conditions") faced in the accident, second the conflicts and tasks (pedestrian crossing the street conflicting with a vehicle from the side (which was going ahead on a straight road), the degree of accident involvement (pedestrians often the primary active part), and further the contributing factors to the accident (pedestrians most often "alcohol (> 0.05% BAC)", opponents most often "visibility constraints").
The Netherlands is on the way to change its existing skid resistance measuring method for its highway network from the Dutch RAW 72, a longitudinal force method, to the Sideway Force method. This method is described in the Technical Specification 15901-8 (SKM device) as well as 15901-6 (SCRIM device) and is in use in 9 European countries. The CEN TC 227 WG5 on Surface Characteristics is currently working on combining of these two technical Specifications into a European standard for Sideway-Force (SWF) measurement devices. The idea of this change in the Netherlands was perceived in 2013 and since then a lot of meetings have been held with the different Dutch decision makers as well as with countries which currently operate SWF devices. There was an intensive exchange of knowledge about these devices and their corresponding quality assurance systems, because the Netherlands wanted to incorporate and rely on an existing system of a neighbor country without losing their present level of quality. The Netherlands has therefore decided to incorporate the German SKM approach. The network monitoring with the new system will start in 2017. To ensure the quality of skid resistance measurements and further cooperation in this field, it has been decided to initiate an alliance between BASt and the Dutch road owner Rijkswaterstaat (RWS). This alliance will facilitate an exchange of research activities, calibration of the Dutch systems according to the existing German Standard as well as control measurements with a BASt-device on the Dutch network during the network monitoring. During 2016 also comparative measurements will be performed on a network level with the current Dutch device and with an SKM device to determine a conversion between the two and to be able to define new threshold values.
To determine whether the model "Accompanied driving from age 17" (AD17) contributes to improvement of young drivers' road safety, two large random samples of novice drivers drawn from the Central Register of Driving Licences (ZFER) held at the Federal Motor Transport Authority (KBA) were compared in terms of the rates of accident involvement and traffic offences at the start of their solo driving career. The samples comprised former participants in the AD17 model and novice drivers of the same age who had obtained a driving licence in the conventional manner immediately after their 18th birthday. Both analysis groups were contacted by post and asked to complete an online questionnaire. In response, 19,000 drivers reported on their first year of solo driving and on the occurrence of any accidents or traffic offences during this period. The analyses were repeated with two "silent" analysis groups comprising a total of 75,000 drivers, for whom any records of traffic offences were retrieved from the Central Register of Traffic Offenders (VZR), with a distinction being made between offences in connection with an accident and other offences. The AD17 model was introduced in all 16 German federal states between April 2004 and January 2008. By the end of 2009, almost one million novice drivers had participated in the model, and almost three-quarters of the target group - so-called "early beginners" who wished to commence solo driving immediately after reaching the age of 18 years - opted for the AD17 model. The phase of introduction of the model was associated with a temporary increase of around five per cent in the demand for driving licences from persons under 19 years of age. During the first year of solo driving, the rate of accident involvement for AD17 participants was 19 per cent lower and the rate of traffic offences 18 per cent lower than for drivers of the same age who had obtained their driving licence in the conventional manner. After adjustment for confounds (e.g. gender and vehicle availability), a reduction in accidents by 17 per cent and in traffic offences by 15 per cent remained as an effect attributable to the model. A comparison on the basis of the distances driven indicated 22 per cent fewer accidents and 20 per cent fewer traffic offences. The results are statistically significant and apply to both male and female drivers. The findings were confirmed in the replication study based on VZR data, with one exception: For female AD17 drivers, and here only for VZR-recorded offences excluding accidents, no significant reduction was found. On the other hand, the rate for female drivers is already lower than that of their male counterparts by three-quarters. Approximately 1,700 injury accidents were prevented by implementation of the model in 2009.
Cyclists are more likely to be injured in fatal crashes than motorised vehicles. To gain detailed and precise behavioural data of road users, i.e. trajectories, a measuring campaign was conducted. Therefore, a black-spot for accidents with cyclists in Berlin, Germany was selected. The traffic has been detected by a fully automated traffic video analysis system continuously for twelve hours. The video surveillance system is capable of automatically extracting trajectories, classifying road user types and precise determining and positioning of conflicts and accidents. Additionally, pre-conflict and pre-accident situations could be analysed to provide further in-depth understanding of accident causation. The evaluation of the measuring campaign comprised the investigation of traffic parameters, e.g. traffic flow, as well as traffic-safety related parameters based on Surrogate Safety Measures (SSM). Furthermore, the spatial and temporal distributions of conflicts involving cyclists were determined. As a result, three possible conflict clusters could be identified, of which one cluster could be confirmed by detailed video analysis, showing conflicts caused by right turning vehicles.
In an on-going project since 2005, ADAC has been analyzing accidents documented by the ADAC air rescue service. The knowledge derived from real-life accidents serves as a basis for new test configurations and assessment criteria. In 2007, ADAC began looking into the feasibility of international data collection. The idea of Global Accident Prevention was born. Three European partner clubs have begun pioneering the project (ÖAMTC, ANWB, and RACC). The aim is to set up an international accident research network to provide a steady stream of information on road accidents. The FIA Foundation supports ADAC in developing and coordinating this initiative.
Active safety systems are aimed at accident prevention, hence the knowledge required for their development is different from that required for passive safety systems aimed at injury prevention. Particularly, knowledge about accident causation is required. When looking at existing accident causation data, it is argued it fails to explain in sufficient detail how and why the accidents occur. Therefore, there is a need for detailed micro-level descriptions of accident causation mechanisms, and also of methodologies suitable for creating such descriptions. One study addressing these needs is the Swedish project FICA (Factors Influencing the Causation of Accidents and Incidents), where an accident investigation methodology suitable for active safety is developed, and in-depth accident investigations following this methodology are carried out on-scene in the area of Gothenburg by a multidisciplinary team. A preliminary aggregated analysis of different cases shows that the methodology developed is adequate for pointing out common contributing factors and devising principal countermeasures.
During a lifecycle a tyre undergoes degradations due to mechanical wear and chemical ageing which affect not only durability and safety but also tyre/road noise emission and rolling resistance. This paper presents a study with the purpose to study how much tyre/road noise and rolling resistance change when car tyres are worn down from the original 8 mm tread depth to 2 mm, and when chemical ageing of the tyre rubber is simulated by exposure to heat. Six car tyres of different types were selected for the study which were worn on a wear machine in steps of 2 mm tread depth. Before, between and after these wear sessions tyre/road noise and rolling resistance were measured on two drum facilities with different surface textures, including replicas of ISO surfaces. Additionally, coast-by and CPX measurements were made on outdoor ISO test tracks. The results show that the wear and age effect was low on ISO surfaces but dramatic (noise increased with wear) on the rough-textured surface and high but opposite on an extremely smooth surface.
In Finland all fatal motor vehicle accidents are studied in-depth on-the-spot by multidisciplinary (police, road and vehicle engineers, physician and behavioural scientist) road accident investigation teams (legislation 2001, work started 1968), which operate in every province. The purpose of the teams is to uncover risk factors that turned an ordinary driving situation into a serious accident and give safety recommendations for improving road safety. The investigation teams do not take a stand on guilt or insurance compensation. When analysing accidents the teams use the concepts of key event, immediate, background and injury risk factors. Compiled investigation folders of each case contain investigation forms from each member, preinvestigation protocol, photographs, sketches etc. About 500 items of information are collected from each accident party. The collected information is also coded into a computer database. Both the database and the investigation folders are widely utilized by researchers and authorities conducting safety work.
SEEKING is looking for answers regarding electric powered bicycles and their relation to traffic safety issues. Does a cyclist need "E"? Is it as risky as riding a moped or are E-bikes creating conflicts with other cyclists? The project described herein, funded by the Austrian Ministry of Transport, has the aim of seeking answers to these hot topics. The SEEKING-team shows an in-depth investigation of vehicle dynamic sensing, together with subjective feedback of test riders to detect similarities and differences between conventional cycling and E-biking. Following an overview on the international status quo, measurement runs and their analyses are performed to find a set of preventative measures to make (E-)biking safer. A specific focus is the detection of curve handling, stopping and acceleration phases as well as conflict studies on course-based test rides and "real world" tests on cycling paths (naturalistic riding).
Recent findings from real-world accident data have shown that fatality risks for pedestrians are substantially lower than generally reported in the traffic safety literature. One of the keys to this insight has been the large and random sample of car-to-pedestrian crashes available in the German In-Depth Accident Study (GIDAS). Another key factor has been the proper use of weight factors in order to adjust for outcome-based sampling bias in the accident data. However, a third factor, a priori of unknown importance, has not yet been properly analysed. This is the influence of errors in impact speed estimation. In this study, we derived a statistical model of the impact speed errors for pedestrian accidents present in the GIDAS database. The error model was then applied to investigate the effect of the estimation error on the pedestrian fatality risk as a function of car impact speed. To this end, we applied a method known as the SIMulation-EXtrapolation (SIMEX) method. It was found that the risk curve is fairly tolerant to some amount of random measurement error, but that it does become flattened. It is therefore important that the accident investigations and reconstructions are of high quality to assure that systematic errors are minimised and that the random errors are under control.
An approach to the standardization of accident and injury registration systems (STAIRS) in Europe
(1998)
STAIRS is a European Commission funded study whose aim is to produce a set of guidelines for a harmonised, crash injury database. The need to evaluate the effectiveness of the forthcoming European Union front and side impact directives has emphasised the need for real world crash injury data-sets that can be representative of the crash population throughout Europe. STAIRS will provide a methodology to achieve this. The ultimate aim of STAIRS is to produce a set of data collection tools which will aid decision making on vehicle crashworthiness as well as providing a means to evaluate the effectiveness of safety regulations. This paper will disseminate the up-to-date findings of the group as they try to harmonise their methods. The stage has been reached where studies into the diverse methods of the UK, French and German systems of crash injury investigation have been undertaken. An assessment has already been made of the relationships between the three current systems in order to define the areas of agreement and divergence. The conclusions reached stated that there were many areas that are already closely related and that the differences were only at the detailed level. With the emphasis on secondary safety and injury causation, core data sets were decided upon, taking into account: vehicle description, collision configuration, structural response of vehicles, restraint and airbag performance, child restraint performance, Euro NCAP, pedestrian and vehicle occupant kinematics, injury description and causation. Each variable was studied objectively, the important elements isolated and developed into a form that all partners were agreeable on. A glossary of terms is being developed as the project progresses which includes ISO standards and other definitions from the associated CAREPLUS project, which addresses the comparability of national data sets. A major consideration of the group was the data collection method to be employed. The strengths and weaknesses of each study were investigated to obtain a clear idea of which aspects offered the best way forward. The quality of this information and transference into a common format, as well as the necessary error checking systems to be employed have just been completed and are described. In tandem with this area of study the problem of the statistical relationship of each sample to the national population is also being investigated. The study proposes a mechanism to use a sample of crash injury data to represent the national and international crash injury problem
While the number of fatal accidents is diminishing every year, there is still a need of improvement and action to prevent these deaths. Basis for this purpose has to be an analysis about the factors influencing the car crash mortality. There are various studies describing the univariate influence of several factors, but crash scenarios are too complex to be described by a single variable. The multivariate analysis respects the interference of the variables and gets so to more detailed and representative results. This multivariate analysis is based on about 2,600 cases (the data have been collected by the accident research units Hannover and Dresden (during the years 1999-2003). This paper presents a multivariate model (containing ten different variables) which detects 93% of these cases properly. This means it detects the cases as truly survived and truly death.
The NHTSA-sponsored Crash Injury Research and Engineering Network (CIREN) has collected and analyzed crash, vehicle damage, and detailed injury data from over 4000 case occupants who were patients admitted to Level-I trauma centers following involvement in motor vehicle crashes. Since 2005, CIREN has used a methodology known as "BioTab" to analyze and document the causes of injuries resulting from passenger vehicle crashes. BioTab was developed to provide a complete evidenced-based method to describe and document injury causation from in-depth crash investigations with confidence levels assigned to the causes of injury based on the available evidence. This paper describes how the BioTab method is being used in CIREN to leverage the data collected from in-depth crash investigations, and particularly the detailed injury data available in CIREN, to develop evidence-based assessments of injury causation. CIREN case examples are provided to demonstrate the ability of the BioTab method to improve real-world crash/injury data assessment.
Bicyclists are minimally or unprotected road users. Their vulnerability results in a high injury risk despite their relatively low own speed. However, the actual injury situation of bicyclists has not been investigated very well so far. The purpose of this study was to analyze the actual injury situation of bicyclists in Germany to create a basis for effective preventive measures. Technical and medical data were prospectively collected shortly after the accident at the accident scenes and medical institutions providing care for the injured. Data of injured bicyclists from 1985 to 2003 were analyzed for the following parameters: collision opponent, collision type, collision speed (km/h), Abbreviated Injury Scale (AIS), Maximum AIS (MAIS), incidence of polytrauma (Injury Severity Score >16), incidence of death (death before end of first hospital stay). 4,264 injured bicyclists were included. 55% were male and 45% female. The age was grouped to preschool age in 0.9%, 6 to 12 years in 10.8%, 13 to 17 years in 10.4%, 18 to 64 years in 64.7%, and over 64 years in 13.2%. The MAIS was 1 in 78.8%, 2 in 17.0%, 3 in 3.0%, 4 in 0.6%, 5 in 0.4%, and 6 in 0.2%. The incidence of polytrauma was 0.9%, and the incidence of death was 0.5%. The incidence of injuries to different body regions was as follows: head, 47.8%; neck, 5.2%, thorax, 21%; upper extremities, 46.3%; abdomen, 5.8%; pelvis, 11.5%, lower extremities, 62.1%. The accident location was urban in 95.2%, and rural in 4.8%. The accidents happened during daylight in 82.4%, during night in 12.2%, and during dawn/dusk in 5.3%. The road situation was as follows: straight, 27.3%; bend, 3.0%; junction, 32.0%; crossing, 26.4%; gate, 5.9%; others, 5.4%. The collision opponents were cars in 65.8%, trucks in 7.2%, bicycles in 7.4%, standing objects in 8.8%, multiple objects in 4.3%, and others in 6.5%. The collision speed was grouped <31 in 77.9%, 31-50 in 4.9%, 51-70 in 3.7%, and >70 in 1.5%. The helmet use rate was 1.5%. 68% of the registered head injuries were located in the effective helmet protection area. In bicyclists, head and extremities are at high risk for injuries. The helmet use rate is unsatisfactorily low. Remarkably, two thirds of the head injuries could have been prevented by helmets. Accidents are concentrated to crossings, junctions and gates. A significant lower mean injury severity was observed in victims using separate bicycle lanes. These results do strongly support the extension or addition of bicycle lanes and their consequent use. However, the lanes are frequently interrupted at crossings and junctions. This emphasizes also the important endangering of bicyclists coming from crossings, junctions and gates, i.e. all situations in which contact of bicyclists to motorized vehicles is possible. Redesigning junctions and bicycle traffic lanes to minimize the possibility of this dangerous contact would be preventive measures. A more consequent helmet use and use and an extension of bicycle paths for a better separation of bicyclists and motorized vehicle would be simple but very effective preventive measures.
Who doesn't wear seat belts?
(2009)
Using real world accident data, seat belts were estimated to be 61% effective at preventing fatalities, and 32% effective at preventing serious injuries. They were most effective for drivers with an airbag. Seat belts were estimated as having prevented 57,000 fatalities and 213,000 seriously injured casualties in the UK since 1983. Seat belt legislation was estimated to have prevented 31,000 fatalities and 118,000 seriously injured casualties. A future increase in effective seat belt wearing rate (which takes into account seating position) in the UK from 92.5% to 93% may prevent casualties valued at a societal cost of over -£18 million per year. To target a seat belt campaign, the question "who doesn"t wear seat belts?" must be answered. Seat belt wearing rates and the number of unbelted casualties were analysed. It was primarily young adult males who didn"t wear seat belts, and they made up the majority of unbelted fatalities and seriously injured casualties.
Technical progress in automotive engineering focuses at the moment on two competing branches: improving safety and reducing energy consumption. Recent consideration has been given to a third factor, cost to the consumer. Challenges are presented by demographic changes, especially with increasing participation of elderly people in road traffic. The report considers the recent history of road accidents in Germany and statistics relating to vehicle population and road performance. There is a general trend towards decreasing numbers of accidents and their severity. Transport is responsible for roughly 20% of CO2 emissions and approximately 70% of total petroleum consumption. The Federal Government has responded to these challenges by publishing the Freight Transport and Logistics Masterplan in the summer of 2008. It describes the strategic transport policy direction and the key elements of the future course of action which are to be used to ensure the provision of efficient infrastructure and, at the same time, to reduce the amount of energy consumed by vehicles and make transport more efficient, cleaner and quieter. This document contains a number of concrete measures subsumed under the following six objectives: Making optimum use of transport infrastructure - shaping transport to make it more efficient; Reducing the number of journeys - ensuring mobility; Transferring more traffic to the railways and inland waterways; Upgrading more transport arteries and hubs; Environmentally friendly, climate friendly, quiet and safe transport, and Good working conditions and good training in the freight transport industry. Progress in research is outlined in the following areas: Daytime Running Lights for Motorcycles; Safety of hydrogen vehicles - addressing safety and environmental issues by development of a Global Technical Regulation for hydrogen vehicles; Elements of active vehicle safety for elderly drivers; Periodical Technical Inspection of electronically controlled systems in road vehicles - Electronic Stability Control; Pedestrian protection; Crash Compatibility - role of collision partner in passive safety tests; Child safety; Euro NCAP - Child Restraint Systems, and German Field Operational Test on Car-to-Car and Car-to-Infrastructure Systems (SIM-TD). The research project AKTIV - "Adaptive and Cooperative Technologies for Intelligent Traffic" encompasses the design, development, and evaluation of novel driver assistance systems, knowledge and information technologies and is set up to find solutions for efficient traffic management and Car-to-Car and Car-to-Infrastructure communication for future cooperative vehicle applications. The European Statement of Principles on the Human Machine Interface (HMI), presented at the eSafety Conference, which was held in Berlin on 5/6 June 2007, addresses issues such as Real Time Traffic Information (RTTI), Legal issues of Advanced Driver Assistance Systems (ADAS) and e-security.
Topics of this report are: Road accidents in Germany - Socio-economic costs due to road traffic accidents - Vehicle population and road performance " Automotive IT " Electromobility. The following research subjects are presented: Safety of electric vehicles - Forward looking safety systems - Cooperative systems - Safety related traffic information - Freight transport: Action plan freight transport and trial with longer trucks - Lane departure warning systems and Advanced emergency braking systems (AEBS) for heavy duty vehicles - Dummy harmonization " Compatibility - Child safety - Virtual testing - Driving under the influence of drugs, alcohol and medicines - Fire safety of buses - Milled shoulder rumble strips - Conspicuity of powered-two-wheelers - Automatically dipped high beam and rear view mirrors.
New vehicle types are extensively tested to check almost all factors that influence ride and handling. With reference to the Association of German Car Tuners" (VDAT e.V.) valuations, approximately 10% of all cars in Germany are being modified by their owners. 28 % of those modifications" sales are divergent wheel-tire combinations, 13 % are tuning measures on the chassis suspension or wheel spacers. In almost all cases the singular modifications present a general permission for specific vehicles they have been tested in. Combined tuning measures, however, are often checked by just one inspector, following a procedure of mostly subjective assessment criteria. Today, critical attributes are only being observed, in case a vehicle is involved in an accident and the modifications are identified as crash causal factors or as a cofactor on the development of a crash. For the first time, a field study allows a survey of safety affecting chassis modifications. The test layout has to comply with some basic conditions. Different vehicle concepts with a wide margin of modifications are required to get a high transferability of the results. A total amount of more than 150 tested vehicles serves the same purpose. The tests are limited concerning the installation time of measurement techniques and the requirement that no damage, defilement or immoderate wear of the vehicles are accepted by their owners. Due to such factors as well as the driver Ìs acceptance, the vehicles are controlled by its owners instead of robots or test drivers. For keeping down the driver- influence, the lane has narrow boundaries and the driver has to drive in strictly adherence to the given instructions. After gathering all modifications, as well as static and kinematic parameters like the toe and camber angle, dynamic testing of predominantly lateral dynamics is conducted. Besides standardized tests like the ISO 3888-2 (Obstacle Avoidance) or the ISO 14512 (Braking on Surfaces with Split Coefficient of Friction), to test the influence of modified kingpin offsets caused by wheel spacers, some deviant tests are conducted. Those are required due to the demand of objective test results for road tests with vertical induced stimulation of the chassis suspension. Hence, new tests on corner braking with and without vertical stimulation have been developed. The interpretation of data includes thresholds, e.g. the maximum entrance velocity without hitting cones, on the one hand, and the analysis of characteristics of data concerning time and frequency range, "1-second values" and peak response times on the other hand. Besides the thresholds as indicators for the achievable velocities, which are mainly affected by friction coefficients, the vehicle reaction in the course of time characterizes the vehicle reaction in the threshold range and consequently the operational demands on the driver. The field study has started and promises the first long-range analysis of chassis modifications. The results offer a basis for hypothesis and resultant further test layouts for oncoming studies of the identified critical tuning measures.
It is very important for Automotive OEMs to get feedback on their product performance on real roads for continuous improvement. Every OEM has a way of collecting this feedback for various performance parameters. Systematic accident research is a way to generate the information related to safety performance of the vehicle. In India, while there is a large amount of data related to the accidents, it is found this data is aimed at understanding the gross statistics and not directly useful for technology development. This paper explains learnings from a pilot study carried out in collaboration with an Emergency Medical Services provider on one of the expressways (motorways). This pilot study has resulted in development of working model that could now be scaled up at for wider application. The paper also presents some of the important observations based on the data collected.
Established in 1997, the European New Car Assessment Programme (Euro NCAP) provides consumers with a safety performance assessment for the majority of the most popular cars in Europe. Thanks to its rigorous crash tests, Euro NCAP has rapidly become an important driver safety improvement to new cars. After ten years of rating vehicles, Euro NCAP felt that a change was necessary to stay in tune with rapidly emerging driver assistance and crash avoidance systems and to respond to shifting priorities in road safety. A new overall rating system was introduced that combines the most important aspects of vehicle safety under a single star rating. The overall rating system has allowed Euro NCAP to continue to push for better fitment and higher performance for vehicles sold on the European market. In the coming years, the safety rating is expected to play an important role in the support of the roll-out of highly automated vehicles.
When the EEVC proposed the full-scale side impact test procedure, it recommended that consideration should be given to an interior headform test in addition. This was to evaluate areas of contact not assessed by the dummy. EEVC Working Group 13 has been researching the parameters of a possible European headform test procedure in four phases. Earlier stages of the research have been presented at previous ESV conferences. The conclusions from these have suggested that the US free motion headform should be used in any European test procedure and that it should be a free flight test, not guided. This research has now culminated in proposals for a European test procedure. This paper presents the proposed EEVC side impact interior headform test procedure, giving the rationale for the test and the first results from the validation phase of the test protocol.
Injuries in motorbike accidents in correlation with protective clothes and mechanism of the accident
(2013)
This study deals with a possible connection between safety clothing / accident mechanism and injury severity in a state-wide traffic accident investigation with focus on light and small motorbike-involvement for accidents in the area of the Saarland in which the persons riding the bike have been injured or killed. An interdisciplinary team of medical scientists and engineers collected the medical and technical data as well as all the relevant traces of the accident on scene and in time. During twenty months of data collection a total of 401 cases could be gathered. Grave injuries were more common for the group of heavier motorcycles (>125 ccm). Motorcyclists had been polytraumatized only in the group where the accident was connected with a collision. Significant correlation between protective clothes and injury severity could only be found for protective gloves and protective trousers. The knowledge about mechanism of the accident, protective clothes and severity of injuries can be helpful for the improvement of road and motorcyclists' safety.
This contribution introduces a number of psychological methods of analysis that are based on the practice-oriented collection of information directly at the site of an accident and that allow for an analysis and coding of the accident causes. Investigation examples and examples of the data combinations with basic medical and technical data are outlined. Objective of the collection is the inter-disciplinary investigation of human factors in the causes of accidents ("human-factor-analysis"). The psychological data are incorporated according to an integrative model for accident causes based on empiric algorithms in the data base of the accident research, where the clustered evaluation potential of comprehensive factors of the accident development can be illustrated. The central theoretical concept for the basic model of the progress of the accident from a psychological point of view comprises psychological indicators for the evaluation of the site of the accident for the analysis of the perception conditions as well as a classification of the gleaned data into the accident progress model according to chronological and local criteria. Perception conditions, action intentions and executions as well as conditions limiting perception and actions are acquired, using a questionnaire for persons involved in an accident, and are also integrated into the data structure concerning weighted feature characteristics as well as combined with other relevant features. Suitable systematization tools for the collection and coding of psychological accident development parameters have to be provided, which require primarily a model image of the corresponding processes from the persons involved in the accident (perceptions, expectations, decisions, actions). The interactive accident model contains components of the models by KÜTING 1990, MC DONALD 1972, SURREY 1969 and RASMUSSEN 1980. Based on the inter-action of the three partial systems "person", "vehicle" and "environment", the first step is the assessment of the situation by the persons involved in the accident. This is dependent on the personal attitudes and motives, on experiences and expectations concerning the progress of the situation. Subsequently, data concerning the manner of the coping with the ambiguous state as well as with the instable state (emergency reaction immediately before the accident occurs) are collected. The factors relating to the persons involved in the accident are gathered on several levels using corresponding questionnaires. The coding of the found and collected characteristics is conducted in a multidimensional evaluation relating to the technical results of the accident reconstruction and of the psychological classification, which are subsequently integrated in coded form into the data base of the accident research. The result of this analysis is a description of the development of the accident depicted on a chronological vector from a perception and decision theoretical perspective. This is explained in detail using exemplary cases.
For the avoidance of traffic accidents by means of advanced driver assistance systems the knowledge of failures and deficiencies a few seconds before the crash is of increasing importance. This information e.g. is collected in the German accident survey GIDAS by an interview derived from the ACAS methodology. However to display the whole range of accident causation factors additional information is needed on enduring factors of the system components "human", "infrastructure" and "machine". On the strategic level these accident moderating factors include long term influences such as medical preconditions or a general higher risk taking behavior as well as influences on the immediate conflict level such as an aggressive response to a perceived previous traffic conflict. This study was conducted to examine the feasibility of collecting such causation information in the scope of an in-depth accident investigation like GIDAS. Due to the comprehensive amount of information necessary to estimate the moderating factors the collection of the information is distributed to different methods. 5 cases of real world crashes have been investigated where information was collected on-scene and retrospective by interviews. The identified moderating factors of the accidents and the method for collecting the information are displayed.
Introduction: The method of causation analysis applied under the German accident survey GIDAS, which is based on Accident Causation Analysis System (ACAS) focuses on an on-scene data collection of predominantly directly event-related causation factors which were crucial in the accident emergence as situational resulting events and influences. The paradigm underlying this method refers to the findings of the psychological traffic accident research that most causally relevant features of the system components human, infrastructure and vehicle technology are found directly in the situation shortly before the accident. This justifies the survey method which is conducted directly at the accident (on-scene), shortly after the accident occurrence (in-time) with the detection of human-related causes (in-depth). Human aspects of the situation analysis that interact and influence the risk situations shortly before the collision are reported as errors, lapses, mistakes and failures in ACAS in specific categories and subcategories. Thus methodically ACAS is designed primarily for the collection of accident features on the level of operational action, which certainly leads to valid findings and behavioral causes of accidents. The enhancement by means of Moderating Conditions concerns the pre-crash phase in different levels: strategical, tactical and operational.
From literature well-known analyzes on risks, hazards and causes of accidents of older drivers are amended by the present study in which a comparison of the specific features of accident causes of older car drivers (older than 60 years) and of younger car drivers (under 25 years) is conducted. Mainly the question is pursued if specific errors, mistakes and lapses are predominant in the two different age groups. The analysis system ACAS (Accident Causation Analysis System) used hereby consists of a sequential system of accident causation factors from the human, the technical and the infrastructural field, whereupon for this study the influence of the human features on the accident development in two different age groups is of interest. ACAS is both an accident model and an analysis and classification system, which describes the human participation factors of an accident and their causes in the temporal sequence (from the perceptibility to concrete action errors) taking into consideration the logical sequence of individual basic functions. In five steps (categories) of a logical and temporal sequence the hierarchical system makes human functions and processes as determinants of accident causes identifiable. The methodology specifically focuses on the use in so-called "In-Depth" and "On-Scene" investigation studies. With the help of the system for each accident participant one or more of five hypotheses of human cause factors are formed and then specified by appropriate verification criteria. These hypotheses in turn are further specified by indicators in such manner that the coding of the causation factors by a code system meets the needs of database processing and are accessible to a quantitative data analysis. The first results of the descriptive comparison of the two age groups concern mainly differences in the functional levels "information admission/perception" (where the elderly drivers have more difficulties than the young ones) and "information processing/evaluation" (where the younger drivers show more problems). Concerning the cognitive function of "planning" the group of younger drivers seems to be more often involved in an accident because of excessive speed.
The "Seven Steps Method" is an analysis and classification system, which describes the human participation factors and their causes in the temporal sequence (from the perceptibility to concrete action errors) taking into consideration the logical sequence of individual basic functions. By means of the "seven steps" it is possible to describe the relevant human causes of accidents from persons involved in the accident in an economic way with a sufficient degree of exactitude, because the causes can be further differentiated in their value (e.g. diversion as external diversion with regard to impact due to surroundings) and their sub values (e.g. external diversion with regard to impact due to surroundings in the shape of a "capture" of the perception by a prominent object of the traffic environment). Theoretically it is possible that one or more causing moments can be assigned to a person involved in an accident in each of the "seven steps"; however it is also possible to sufficiently clarify the cause in only one level (examples for this are described). In the practice of accident investigation at the site of the accident, the sequence chart is also relevant. With its assistance the questioning of the people involved in an accident can be accomplished in a structured way by assigning a set of questions to each step.
Today's volumes of traffic require more and more responsibility from each individual road user in their interactions. Those who drive motor vehicles have the singular obligation to minimise the risk of accidents and hence the severity of injuries, particularly with a view to the most vulnerable road users such as motor bikes, bikes and pedestrians. Since responsible and pro-active driving depends first and foremost on the visual information relayed by our eyes and the visual channel this requires good command of the traffic and all-round visibility from our driver's seat. Granted that human error can never be fully excluded, improving visibility around the car is nevertheless an urgent priority. To do so, we need to rate visibility in the most realistic driving situations. Since the existing visibility metrics and methodology are not applicable to real-life driving situations, this study aimed at developing a new visibility rating methodology based on real-life accident scenarios. On the basis of the cases documented by the accident research project, this study analysed criteria indicative of diminishing visibility on the one hand and revealing some peculiarities in connection with the visibility issue on the other. Based on the above, the project set out to develop a rating methodology allowing to assess all-round visibility in various road situations taking into account both driver and road geometries. In this context, the assessment of visibility while turning a corner, crossing an intersection and joining traffic on a major road (priority through route) is of major importance. The first tests have shown that critical situations can be avoided by adapting the relevant geometries and technical solutions and that significant improvements of road safety can be derived therefrom.
Pedestrian accidents are one of the major concerns related with road accidents around the world. Portugal has one of the highest rates of pedestrian fatalities in Europe. In this paper an overview conditions were the pedestrian accidents occurred in Portugal is presented. In the last years, a project related with the pedestrian accidents has run in Portugal for the period 2004-2006 where 603 people died, 2097 have been severely injured and about 17000 slightly injured. Within this project all the pedestrian accidents in this period have been analysed providing global information about a wide range of aspects, since location, driver and pedestrian characteristics, weather and road conditions, among others. In addition, 50 in-depth accidents have been investigated and the data collected according the Pendant methodology. For this in-depth methodology detailed information about the accident has been collected, including injuries, vehicle damage, road conditions and road user- behaviour and actions. An accident reconstruction has been carried for each case including the determination of the speeds and driver actions, and the analysis of the contributing factors for the accident. Depending of the accident complexity, different methodologies have been used to analyse these accident, from the classical analytical equations such as Simms and Woods, to the use of detailed computational pedestrian models as those included in the commercial software- PC-Crash-® or Madymo-®. Also one of the goals of our investigation is the development of multibody models and methodologies for the reconstruction of pedestrian accidents. Some of these tools integrated in the commercial software Cosmos Motion-® are presented. The advantages of the different approaches are compared and discussed for some of the accidents investigated. With these tools the impact speed can be determined from the projection distance with analytical tools or PC-Crash-®, but more complex tools should be used to determine speed from the injuries, what is especially important for fatal accidents. The influence of the vehicle geometry and stiffness characteristics is another aspect analysed, where the influence of the vehicle stiffness has been determined using a combined multibody-finite elements approach within the software Madymo-®.
As the data for road weather stations is used for online traffic control within section control systems, it is very important for the efficiency of the traffic control systems to be based on reliable data of a high quality. Therefore, a Test Site for checking the quality of road weather stations was established near Munich in Germany in 2003 and has been operational since then. In close co-operation with all participants (sensor manufacturers, road authorities, German Federal Research Institute, research and consultancy bodies), the overall goal was to improve the sensors" quality as well as to establish methods to detect failures in measurements. Furthermore, several improvements were carried out within the scope of the Test Site using the expertise of all participants and the infrastructure of the Test Site. The developments, reports and results obtained are both significant and helpful for manufacturers, road authorities, practitioners, research and consultancy.
The aging structure as well as the considerable increase of heavy-traffic load on Germany's motorways and trunk roads encourages the use of innovative, sound and reliable methods for the structural assessment on network level as well as on project level. Essential elements for this are data, which allow a reliable assessment. For a holistic approach to structural pavement assessment performance orientated measurements will be necessary. In combination with functional parameters as well as write-down models, strategically motivated decision making processes will be useful combined with technically motivated decision processes. For the application at the network level, the available methods for performance orientated measurements are still challenging, as they are based either on testing drill-cores or on non traffic speed methods. In recent years significant innovation steps have been made to bring traffic speed bearing capacity measurements and methods for evaluating pavement structures on the road. The paper summarizes the actual assessment procedures in Germany as well as the ongoing work on the development and implementation of new methods and techniques.
Estimation of the effects of new emission standards on motorcycle emissions by means of modeling
(2016)
Road traffic is, in addition to the energy sector and the industry, one main source of air pollution and carbon dioxide emissions. Although most countries and manufacturers agreed to environmental regulations to reduce the pollutant emissions, particularly in urban areas with high traffic density, the impact of road traffic emissions on the environment and human health has been growing in importance steadily. Due to stricter emission standards and the binding use of emission-reducing systems (e.g. three-way catalyst) hydrocarbon emissions from passenger cars have been reduced significantly since the last two decades. Unlike to passenger cars the emissions standards of powered two-wheelers have not been adjusted since 2006 although their share of hydrocarbon emissions to the total amount of hydrocarbon emissions of road traffic is estimated to be disproportionately high. Due to the new regulation (EU) No. 168/2013 powered two-wheelers have to fulfill new emission standards from 2016 (Euro 4) and 2020 (Euro 5) onwards. Besides new limits for the tailpipe emissions the evaporative emissions are regulated separately for the first time, as they make up a high proportion to the total hydrocarbon emissions in this vehicle class. In this context, the calculation and forecast of road traffic emissions is an important tool to verify compliance of climate targets and to assess the reduction potential of emission-reducing systems. For that purpose the Federal Highway Research Institute (BASt) uses the emission- and calculation tool TREMOD (Transport Emission Model) which provides baseline data and calculated results for pollutants in almost every differentiation e.g. vehicle category, traffic situation and road type. Moreover, estimations of future emission trends, stock information and mileage distribution can be made. The main objective is to illustrate the impact of the upcoming emission standards Euro 4 and Euro 5 on the operational hydrocarbon emissions of powered two-wheelers based on statistical estimations. The significant aspect is to generate scenarios to show the reduction potential of hydrocarbon emissions of powered two-wheelers, differentiated into motorcycles and small motorcycles, in relation to the total share of hydrocarbon emissions in this vehicle class and to the total hydrocarbon emissions from road traffic. As a part of their research, the authors can make initial statements about the possible effect of the new emission standards of regulation (EU) No. 168/2013 by means of modeling with TREMOD.
In Germany, in-depth accident investigations are carried out in the Hannover area since 1973. In 1999 a second region was added with surveys in Dresden and the surrounding area. Internationally, the acronym GIDAS (German In-Depth Accident Study) is commonly used for these surveys. Compared to many other countries, the sample sizes of the GIDAS surveys are much larger. The goal is to collect 1.000 accidents involving personal injuries per year and region. Data collection takes place by using a sampling procedure, which can be interpreted as a two-stage process with time intervals as primary units and accidents as secondary units. An important question is, to what extend these samples are representative for the target population from which they are drawn. Analyses show, for example, that accidents with persons killed or seriously injured are overrepresented in the samples compared to accidents with slightly injured persons. This means, that these data are subject to biases due to uncontrolled variation of sample inclusion probability. Therefore, appropriate weighting and expansion methods have to be applied in order to adjust or correct for these biases. The contribution describes the statistical and methodological principles underlying the GIDAS surveys with respect to sampling procedure, data collection and expansion. In addition, some suggestions regarding potential improvements of study design are made from a methodological point of view.
Technische Sicherheitsverbesserungen führen im Mensch-Maschine-System Straßenverkehr nicht zwangsläufig zu Sicherheitsgewinnen. Von den Einstellungen und Verhaltensgewohnheiten der Fahrzeugführer hängt es ab, ob vergrößerte sicherheitspotenziale adäquat genutzt oder durch Verhaltensanpassungen wieder verspielt werden. Anhand ausgewählter theoretischer Modelle und empirischer Forschungsergebnisse (OECD-Studie Behavioural adaptations to changes in the road transport system) wird dies diskutiert, und es werden Kriterien zur Vermeidung unerwünschter Adaptationen abgeleitet, die bereits bei der Planung und Realisierung technischer Verbesserungen Berücksichtigung finden sollten.
The objectives of this paper are the analysis of the accident risk of drivers brain pathologies (Mild Cognitive Impairment, Alzheimer- disease, and Parkinson- disease), and the investigation of the impact of driver distraction on the accident risk of patients with brain pathologies, through a driving simulator experiment. The three groups of patients are compared to a healthy group of similar demographics, with no brain pathology. In particular, 125 drivers of more than 55 years old (34 "controls"" and 91 "patients") went through a large driving simulator experimental process, in which incidents were scheduled to occur. They drove in rural and urban areas, in low and high traffic volumes and in three distraction conditions (undistracted driving, conversation with a passenger and conversation through a mobile phone). The statistical analyses indicated several interesting findings; brain pathologies affect significantly accident risk and distraction affects more the groups of patients than the control one.
Road accidents are typically analyzed to address influences of human, vehicle, and environmental (primarily infrastructure) factors. A new methodology, based on a "Venn diagram" analysis, gives a broader perspective on the probable factors, and combinations of factors, contributing both to the occurrence of a crash and to sustaining injuries in that crash. The methodology was applied to 214 accidents on the Mumbai-Pune expressway. Factors contributing to accidents and injuries were addressed. The major human factors influencing accidents on this roadway were speeding (30%) and falling asleep (29%), while injuries were primarily due to lack of seat belt use (46%). The leading infrastructure factor for injuries was impact with a roadside manmade structure (28%), and the main vehicle factor for injuries was passenger compartment intrusion (73%). This methodology can help identify effective vehicle and infrastructure-related solutions for preventing accidents and mitigating injuries in India.
The increase in light duty trucks (LDT) on the road in the US is a safety concern because of their aggressivity, or risk they present to occupants of cars, especially in side impacts. We use FARS data to look at fatality trends in frontal and side impacts between cars and LDT. FARS data is also used to determine risk, or fatalities per registered vehicle, imposed on car drivers from other vehicle types. We use NASS CDS data to investigate sources of serious injuries in vehicles with side impact. These sources of injury are categorized into three major groups: 1) contact without intrusion, 2) contact with intrusion, and 3) restraints. We find a greater fraction of intrusion related injuries in cars struck on their side by SUV or pick-up trucks than when they are struck by other cars.