620 Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
- 2015 (95) (entfernen)
Dokumenttyp
- Buch (Monographie) (52)
- Konferenzveröffentlichung (40)
- Wissenschaftlicher Artikel (2)
- Bericht (1)
Schlagworte
- Germany (75)
- Deutschland (73)
- Research report (46)
- Forschungsbericht (45)
- Conference (26)
- Konferenz (26)
- Test (23)
- Versuch (21)
- Measurement (19)
- Bewertung (17)
Bereits vor rund zwanzig Jahren wurde die Entwicklung einer bundeslandübergreifenden Erhaltungsstrategie für Verkehrsflächen und Ingenieurbauwerke auf Netzebene angegangen. Zwischenzeitlich sind hierfür Erfassungs- und Bewertungsverfahren erarbeitet worden und in Betrieb. Aufbauend auf den guten Erfahrungen, die mit den bestehenden Managementsystemen gemacht wurden, erscheint es somit folgerichtig für die bislang vernachlässigten sonstigen Anlagenteile der Straße ein eigenständiges Asset Management zu entwickeln. Um die hierfür notwendige Datengrundlage zu schaffen, wurde in dem vorliegenden Forschungsprojekt mittels Literaturrecherche und bundesweiter Befragung von Verantwortlichen Erhaltungskostensätze, Nutzungsdauern sowie Ausstattungsquoten für die sonstigen Anlagenteile " beispielsweise Lichtsignalanlagen oder Schutzeinrichtungen " erhoben. Die Ergebnisse der Umfrage fußten in der Festlegung von für ein Asset Management relevanten sonstigen Anlagenteile sowie einer Untergliederung dieser in einzelne Aggregate. An den jeweiligen Anlagenteilen/Aggregaten konnten dann Leistungen der Instandhaltung, Instandsetzung und Erneuerung definiert werden, die in Kombination mit den Nutzungsdauern und den Ausstattungsquoten eine Kalkulation der benötigten finanziellen Aufwendungen für die Erhaltung der sonstigen Anlagenteile ermöglichen. Weiterer Forschungsbedarf besteht von allem bei der Verbesserung und Verdichtung der Datengrundlage sowie die Umsetzung in einem Computer-Programm nach dem Prinzip des PMS und BMS.
Accident simulation and reconstruction for enhancing pedestrian safety: issues and challenges
(2015)
The enhancement of pedestrian safety represents a major challenge in traffic accidents. This study allows a better understanding of the issues in pedestrian protection. It highlights the potential of in-depth studies in identifying relevant crash parameters interfering in the pedestrian safety. A computational simulation tool was developed to reconstruct pedestrian real-world crashes. A sample of 100 in-depth accident cases was reconstructed from two sources: 40 crashes provided by IFSTTAR-LMA and 60 crashes from CASR. To exemplify the methodology, two accident cases from each database were illustrated. A description of the sample of crashes was presented including the travel and impact speed of the vehicle, the driver reaction, the pedestrian walking speed, the scene configuration with the eventual obstacles, etc. This detailed description is pointing to the major factors affecting the limits of pedestrian safety systems.
Cycling supports the independence and health of the aging population. However, elderly cyclists have an increased injury risk. The majority of injured cyclists is victim of a single-sided accident, an accident in which there is no other party involved. The aim of the project "Safe and Aware on the bicycle" is to develop guidelines for an advisory system that is useful in preventing single-sided accidents. This system is able to support the elderly cyclist; enabling the cyclist to timely adapt his cycling behaviour and improve cycling safety and comfort. For the development of such advisory system the causes of singles accidents and the wishes of the elderly cyclist must be known. First step to obtain this insight was a literature survey and an GIDAS research. Unfortunately accidentology research with GIDAS did not give the full understanding of the pre-crash situations and (especially the behaviour related) factors leading to the accident. The second step was consultation of elderly cyclist through a questionnaire (n=800), in-depth interviews (n=12) and focus group sessions (n=15). This offered complementary information and a much better understanding of the behavioural aspects. Results concern the behaviour in traffic and identify specific physical (i.e. problems looking backwards over the shoulder) and mental issues. Furthermore, the needs and wishes for support in specific cycling situations were identified. In conclusion; The GIDAS results together with the information obtained contacting the elderly cyclists enabled setting up requirements for an advisory system, which is useful in preventing single-sided accidents.
This study aimed at developing an injury estimation algorithm for AACN technologies for Germany and compared them to findings based on Japanese data. The data to build and to verify the algorithm was obtained from the German in-depth Accident Database (GIDAS) and split into a training and a validation dataset. Significant input variables and the generalized linear regression model to predict severe injuries (ISS>15) were selected to maximize area under the receiver operating characteristic curve (AUC). Probit regression with the input parameter multiple impact, delta v, seatbelt use and impact direction gave the largest AUC of 0.91. Sensitivity of the algorithm was validated at 90% and specificity at 76% for an injury risk threshold of 2%. It appears that no major differences between Japan and Germany exist for injury estimation based on delta v and impact direction. However, far side impact and multiple crash events appear to be associated with a larger risk increase in the German data.
Enhanced protection of pedestrians and cyclists remains on the focus. Besides infrastructural and behavioral aspects it is necessary to exploit technical solutions placed on motorized vehicles. Accident research needs reliable data as well as national road accident statistics. Changing the view on seriously injured road users is one of the challenges which will substantially contribute to the optimization on future traffic safety. The missing accuracy in the definition of personal injury has a detrimental effect on making cost efficient road safety policy which is not only focused on fatal accidents. The European commission requested that, starting in 2015, all EU member states provide more detailed data on the injury status of road casualties, with special regard to the group of seriously injured. Conventional accident data will always be essential. But to obtain detailed data about driver behavior in real traffic situations further data sources are required. These could be EDR data, data from electronic control units, data from traffic surveys and traffic counting, naturalistic diving studies and field operational tests. Gaining insight into normal as well as critical driver behavior will enable accident researchers to deduct functions estimating the increase or decrease of accident risk associated with certain behaviors or vehicle functions. Also with view to the introduction of highly automated driving functions in the future such data is urgently needed. Computer simulation based tools to estimate the benefits of active safety systems are another step on the way towards the safety assessment of automated driving. It is now the duty of the scientific community to ask the right questions, to develop a methodology and to merge all these data sources into a common framework for the assessment of future traffic safety innovations.
SEEKING is looking for answers regarding electric powered bicycles and their relation to traffic safety issues. Does a cyclist need "E"? Is it as risky as riding a moped or are E-bikes creating conflicts with other cyclists? The project described herein, funded by the Austrian Ministry of Transport, has the aim of seeking answers to these hot topics. The SEEKING-team shows an in-depth investigation of vehicle dynamic sensing, together with subjective feedback of test riders to detect similarities and differences between conventional cycling and E-biking. Following an overview on the international status quo, measurement runs and their analyses are performed to find a set of preventative measures to make (E-)biking safer. A specific focus is the detection of curve handling, stopping and acceleration phases as well as conflict studies on course-based test rides and "real world" tests on cycling paths (naturalistic riding).
The Traffic Accident Research Institute at University of Technology Dresden investigates about 1,000 accidents annually in the area around and in Dresden. These datasets have been summarized and evaluated in the GIDAS (German Accident In-Depth Study) project for 13 years. During the project it became apparent that the specific traffic situation of a covert exit of a passenger car and an intersecting two-wheeler involves a high risk potential. This critical situation develops in a large part due to the lack of visibility between the driver and the intersecting bike. In this paper the accident avoidance potential of front camera systems with lateral field of view, which allows the driver to have an indirect sight into the crossing street area will be presented.
Assessment of the effectiveness of Intersection Assistance Systems at urban and rural accident sites
(2015)
An Intersection Collision Avoidance System is a promising safety system for accident avoidance or injury mitigation at junctions. However, there is still a lack of evidence of the effectiveness, due to the missing real accident data concerning Advanced Driver Assistance Systems. The objective of this study is the assessment of the effectiveness of an Intersection Collision Avoidance System based on real accidents. The method used is called virtual pre-crash simulation. Accidents at junctions were reconstructed by using the numerical simulation software PC-Crashâ„¢. This first simulation is called the baseline simulation. In a second step the vehicles of these accidents were equipped with an Intersection Collision Avoidance System and simulated again. The second simulation is called the system simulation. In the system simulation two different sensors and four different intervention strategies were used, based on a time-to-collision approach. The effectiveness of Intersection Collision Avoidance System has been evaluated by using an assessment function. On average 9% of the reviewed junction accidents could have been avoided within the system simulations. The other simulation results clearly showed a change in the principal direction of force, delta-v and reduction of the injury severity.
Analysis of pedestrian leg contacts and distribution of contact points across the vehicle front
(2015)
Determining the risk to pedestrians that are impacted by areas of the front bumper not currently regulated in type-approval testing requires an understanding of the target population and the injury risk posed by the edges of the bumper. National statistics show that approximately 10% of all accident casualties are pedestrians, with 20% to 30% of these pedestrian casualties being killed or seriously injured. However, the contact position across the front of the bumper is not recorded in national statistics and so in-depth accident databases (OTS, UK and GIDAS, Germany) were used to examine injury risk in greater detail. The results showed that some injury types and severities of injuries appear to peak around the bumper edges. Although there are sometimes inconsistencies in the data, generally there is no evidence to suggest that the edges of the bumper are less likely to be contacted or cause injury.
Mit Fokus auf Nordrhein-Westfalen (NRW) wird das urbane NO2-Problem umrissen. Um die Jahresgrenzwerte einzuhalten, sind beispielsweise in allen Straßenschluchten in NRW Reduktionen nötig. Die Europäische Kommission hat gegen mehrere Mitgliedsstaaten, darunter Deutschland, Vertragsverletzungsverfahren wegen der Überschreitung von NO2-Grenzwerten eröffnet. Dargestellt werden die Langzeittrends bezüglich der gemessenen Abnahme bei der Stickoxidbelastung. Potenzielle Maßnahmen können hinsichtlich ihrer möglichen Wirkungen durch den Einsatz von Modellen abgeschätzt werden, zum Beispiel Umweltzonen, Fahrverbote, Elektrofahrzeuge. Die Ergebnisse der Messungen und Modellrechnungen werden dargestellt und kritisch beleuchtet. Als Fazit ergibt sich, dass das urbane NO2-Problem nicht einfach zu lösen ist, Minderungen der NOx-Emissionen spiegeln sich nicht in der gleichen Größenordnung in der Abnahme der NO2-Belastung wieder. Bei zusätzlich wirksamen Maßnahmen wie beispielsweise einem höheren Anteil von Elektrofahrzeugen fehlt die (schnelle) praktische Umsetzbarkeit. Eine Kombination aus lokalen, regionalen und europaweiten Maßnahmen ist nötig, um das Problem zu lösen.
Ausgehend von den rechtlichen Grundlagen für die Luftreinhaltung sowie den Grenzwertfestlegungen für Feinstaub (PM10) sowie Stickoxide (NO2) wird auf die heutige Luftqualität in Städten mit Schwerpunkt Stuttgart eingegangen. Dargelegt werden die festgestellten Überschreitungen bei den Grenzwerten für PM10 und NO2. Eingegangen wird auf die Maßnahmen zur Reduzierung der Luftbelastung in Stuttgart und die Wirkungen in Bezug auf die Senkung der Grenzwert-Übersschreitungen beziehungsweise Jahresmittelwerte von PM10 und NO2 an den Hotspot-Stationen "Am Neckartor" und "Hohenheimer Straße". Abschließend wird ein perspektivischer Ausblick gegeben: obwohl die Luftsituation in den Städten kontinuierlich besser geworden ist, gibt es an stark befahrenen städtischen Straßen weiterhin Grenzwertüberschreitungen. Die EU-Vertragsverletzungsverfahren machen weitere Maßnahmen notwendig. Die Städte brauchen praxiserprobte Maßnahmen und keine langfristigen, kostspieligen Pilotversuche mit unsicherem Ausgang.
Today's volumes of traffic require more and more responsibility from each individual road user in their interactions. Those who drive motor vehicles have the singular obligation to minimise the risk of accidents and hence the severity of injuries, particularly with a view to the most vulnerable road users such as motor bikes, bikes and pedestrians. Since responsible and pro-active driving depends first and foremost on the visual information relayed by our eyes and the visual channel this requires good command of the traffic and all-round visibility from our driver's seat. Granted that human error can never be fully excluded, improving visibility around the car is nevertheless an urgent priority. To do so, we need to rate visibility in the most realistic driving situations. Since the existing visibility metrics and methodology are not applicable to real-life driving situations, this study aimed at developing a new visibility rating methodology based on real-life accident scenarios. On the basis of the cases documented by the accident research project, this study analysed criteria indicative of diminishing visibility on the one hand and revealing some peculiarities in connection with the visibility issue on the other. Based on the above, the project set out to develop a rating methodology allowing to assess all-round visibility in various road situations taking into account both driver and road geometries. In this context, the assessment of visibility while turning a corner, crossing an intersection and joining traffic on a major road (priority through route) is of major importance. The first tests have shown that critical situations can be avoided by adapting the relevant geometries and technical solutions and that significant improvements of road safety can be derived therefrom.
Event data recorders (EDRs) are a valuable tool for in-depth investigation of traffic accidents. EDRs are installed on the airbag control module (ACM) to record vehicle and occupant information before, during, and after a crash event. This study evaluates EDR characteristics and aims at better understanding EDR performance for the improvement of accident reconstruction with more reliable and accurate information regarding accidents. The analysis is based on six crash tests with corresponding EDR datasets.
Zur Beurteilung der Alkaliempfindlichkeit von Gesteinskörnungen sind im Teil 3 der Alkali-Richtlinie des DAfStb vom Februar 2007 das Schnellprüfverfahren (Referenzprüfverfahren (SPV)) bzw. der Mörtelschnelltest (Alternativverfahren (MST)) und der Betonversuch mit Nebelkammerlagerung (40-°C) (NK) vorgesehen. Bisher war nicht abschließend geklärt, ob die für diese Standardprüfungen festgelegten Beurteilungskriterien auch dann Verwendung finden können, wenn die Gesteinskörnungen in Fahrbahndecken aus Waschbeton (hoher Zementgehalt, besonders gestaltete Oberfläche) angewendet werden sollen. Für die Untersuchungen wurden drei alkaliunempfindliche Splitte (Andesit I Mitteldeutschland (MD), Rhyolith Süddeutschland (SD) und Gabbro), ein alkaliempfindlicher Splitt (Rhyolith MD) und zwei "potenziell" alkaliempfindliche Splitte (Andesit II MD, Granodiorit) verwendet. Die Bewertung der Alkaliempfindlichkeit der sechs groben Gesteinskörnungen auf Basis der Ergebnisse der AKR-Performance-Prüfungen ergab, dass drei von ihnen "geeignet für die Feuchtigkeitklasse WS im Hinblick auf die Vermeidung einer schädigenden Alkali-Kieselsäure-Reaktion (AKR)" sind. Bei ausschließlicher Verwendung der Ergebnisse der Standardprüfverfahren nach Alkali-Richtlinie konnte diese Aussage getroffen werden, wenn eine der folgenden Bedingungen erfüllt war: - Alle Gesteinskörnungsprüfungen nach Teil 3 der Alkali-Richtlinie des DAfStb wurden bestanden. - Der Mörtelschnelltest (Alternativverfahren) nach Teil 3 der Alkali-Richtlinie wurde bestanden. - Der 60-°C-Betonversuch nach Teil 3 der Alkali-Richtlinie wurde bestanden. Die Begünstigung einer schädigenden AKR durch sich von der Oberfläche abhebende Gesteinskörner (Waschbetonoberfläche) konnte bei den untersuchten Betonzusammensetzungen nicht nachgewiesen werden. Im Bereich der Waschbetonoberflächen wurden keine AKR-Reaktionsprodukte gefunden.
Die Festlegung der Salzdosierung (Streudichte) wird in der aktuellen Winterdienstpraxis zumeist vom Einsatzpersonal auf den Fahrzeugen vorgenommen. Aus der Auswertung von automatisierten Datenaufzeichnungen ist bekannt, dass dabei persönliche Erfahrungen eine wesentliche Rolle spielen. Das drückt sich darin aus, dass beim Vergleich des Dosierverhaltens von mehreren Mitarbeitern unter vergleichbaren Randbedingungen der durchschnittlich eingestellte Dosierwert bis zu 100 % abweicht. Das von der Bundesanstalt für Straßenwesen (Bergisch Gladbach, Deutschland) in Auftrag gegebene Pilotprojekt "Optimierung der Streustoffausbringung " Modell zur Festlegung der objektiv notwendigen Streudichten im Straßenwinterdienst" hatte die Minimierung von "subjektiven Faktoren" bei der Taustoffanwendung zum Ziel. Aufbauend auf dem Phasendiagramm für die Mischung von NaCl und H2O wurde ein Berechnungsalgorithmus entwickelt, der Temperatur und Wasserfilmdicke auf der Fahrbahn in wählbaren Prognosezeiträumen berücksichtigt. Die stündlich aktualisierten Prognosedaten werden während der Einsatzfahrt des Winterdienstfahrzeuges übermittelt und haben direkten Einfluss auf die Streudichte. Neben den Prognosedaten haben auch technologische und streckenbezogenen Randbedingungen direkten Einfluss auf die berechnete Streudichte. Technologische Randbedingungen sind die Streutechnologie (wahlweise FS 30 oder FS 100) und der Prognosezeitraum. Zu diesem Zweck wurden vier Fahrzeuge von Autobahnmeistereien in Brandenburg und Nordrhein-Westfalen mit Bordcomputern ausgestattet, mit denen Daten kurzfristiger Wetterprognosen des Deutschen Wetterdienstes (Zeithorizont: 3 Stunden), Messungen der Fahrbahntemperatur und Daten der an der Strecke befindlichen Straßenwetterstationen verarbeitet werden. Die Bordcomputer sind über das GSM-Netz mit einem zentralen Server verbunden. Dadurch werden die Daten der Wetterprognosen laufend aktualisiert. Der Einsatz der prognostischen Streudichteberechnung hat gezeigt, dass durch diese Technik erhebliche Einsparungspotenziale bei der Taustoffanwendung erschlossen werden können. Das gilt vor allem für präventive Streueinsätze.
Bei Fahrbahnoberflächen von Brücken und insbesondere von Stahlbrücken besteht gegenüber dem Straßenverlauf vor und hinter der Brücke die Gefahr einer vorzeitigen Glättebildung, da die relativ dünnen Fahrbahntafeln schnell auskühlen, während der dickere Belagsaufbau und der Untergrund auf der freien Strecke wie ein Wärmespeicher wirken. Insbesondere bei Brücken an ungünstigen Standorten, wie in der Nähe von Gewässern oder in Einschnitten, besteht vor allem im Spätherbst und am Beginn des Frühjahrs eine besondere Gefahr für die Verkehrsteilnehmer. Dieser besonderen Gefährdung des Verkehrs wird derzeit entweder durch Frühwarnsysteme mit vorsorglichem Streudienst oder durch Taumittelsprühanlagen begegnet. Eine weitere Möglichkeit die besondere Gefährdung aus dem Vereisungsverhalten der Brückenfahrbahn zu beseitigen, ist die, den Fahrbahnbelag der gefährdeten Brücken in den kritischen Zeiträumen zu beheizen. Dadurch wird die Salzbelastung für die Umwelt und auch für das Bauwerk reduziert. Im BASt"Bericht B87 "Vermeidung von Glättebildung auf Brücken durch die Nutzung von Geothermie" [2] wird diese umweltfreundliche Alternative ausführlich erläutert. Im Rahmen des hier beschriebenen Projekts wurden ergänzende Untersuchungen durchgeführt, um weiterführende Erkenntnisse über das Verbundverhalten und die Dauerhaftigkeit von Gussasphalt mit integrierten Rohrregistern zu gewinnen und daraus Empfehlungen für die Praxis abzuleiten. Zum einen handelt es sich um Abreissversuche an zwei D-Brückenmodulen mit Fahrbahntemperierung, zum anderen um Langzeitmessungen auf einer Straßenbrücke, bei der im Rahmen einer Erneuerung des Fahrbahnbelags probeweise Rohrregister eingebaut wurden. Es wurden verschiedene Systeme untersucht, die eine sichere Befestigung der Rohrregister auf der Unterlage gewährleisten und gleichzeitig den Einbau der Deckschicht möglichst wenig behindern. Desweiteren wurde die Ausrichtung der Rohre untersucht und die Dauerhaftigkeit überprüft. Großflächige Befestigungsgitter haben sich zur Fixierung von Rohrregistern für die in Deutschland üblichen Fahrbahnbeläge als ungeeignet erwiesen, da sie einen ausreichenden Schichtenverbund behindern. Für die Befestigung der Rohrregister sind daher wenig störende Befestigungsmittel wie z.B. halbseitige Rohrschellen zu empfehlen. Für quer zur Fahrtrichtung ausgeführte Rohrregistern konnte die grundsätzliche Praxistauglichkeit hinsichtlich des Einbaus und der Dauerhaftigkeit unter Verkehrsbelastung nachgewiesen werden. Als entsprechender Nachweis für längs zur Fahrtrichtung ausgeführte Rohrregister dient die erfolgreiche Pilotanwendung bei der Kanalbrücke Berkenthin. Im Hinblick auf die Dauerhaftigkeit konnten im Untersuchungszeitraum von 5 Jahren keine Einschränkungen festgestellt werden. Es wurden weder Risse noch Verformungen im Fahrbahnbelag indiziert. Für eine weitere Beurteilung des Langzeitverhaltens sollten auch zukünftig regelmäßige Begehungen und Messungen erfolgen.
Since the beginning of the testing activities related to passive pedestrian safety, the width of the test area being assessed regarding its protection level for the lower extremities of vulnerable road users has been determined by geometrical measurements at the outer contour of the vehicle. During the past years, the trend of a decreased width of the lower extremity test and assessment area realized by special features of the outer vehicle frontend design could be observed. This study discusses different possibilities for counteracting this development and thus finding a robust definition for this area including all structures with high injury risk for the lower extremities of vulnerable road users in the event of a collision with a motor vehicle. While Euro NCAP is addressing the described problem by defining a test area under consideration of the stiff structures underneath the bumper fascia, a detailed study was carried out on behalf of the European Commission, aiming at a robust, worldwide harmonized definition of the bumper test area for legislation, taking into account the specific requirements of different certification procedures of the contracting parties of the UN/ECE agreements from 1958 and 1998. This paper details the work undertaken by BASt, also serving as a contribution to the TF-BTA of the UN/ECE GRSP, towards a harmonized test area in order to better protect the lower extremities of vulnerable road users. The German In-Depth Accident Database GIDAS is studied with respect to the potential benefit of a revised test area. Several practical options are discussed and applied to actual vehicles, investigating the differences and possible effects. Tests are carried out and the results studied in detail. Finally, a proposal for a feasible definition is given and a suggestion is made for solving possible open issues at angled surfaces due to rotation of the impactor. The study shows that, in principle, there is a need for the entire vehicle width being assessed with regard to the protection potential for lower extremities of vulnerable road users. It gives evidence on the necessity for a robust definition of the lower extremity test area including stiff and thus injurious structures at the vehicle frontend, especially underneath the bumper fascia. The legal definition of the lower extremity test area will shortly be almost harmonized with the robust Euro NCAP requirements, as already endorsed by GRSP, taking into account injurious structures and thus contributing to the enhanced protection of vulnerable road users. After finalization of the development of a torso mass for the flexible pedestrian legform impactor (FlexPLI) it is recommended to consider again the additional benefit of assessing the entire vehicle width.
Autonomous Emergency Braking (AEB) systems for pedestrians have been predicted to offer substantial benefit. On this basis, consumer rating programmes, e.g. Euro NCAP, are developing rating schemes to encourage fitment of these systems. One of the questions that needs to be answered to do this fully, is to determine how the assessment of the speed reduction offered by the AEB is integrated with the current assessment of the passive safety for mitigation of pedestrian injury. Ideally, this should be done on a benefit related basis. The objective of this research was to develop a benefit based methodology for assessment of integrated pedestrian protection systems with pre-crash braking and passive safety components. A methodology has been developed which calculates the cost of pedestrian injury expected, assuming all pedestrians in the target population (i.e. pedestrians impacted by the front of a passenger car) are impacted by the car being assessed, taking into account the impact speed reduction offered by the car’s AEB (if fitted) and the passive safety protection offered by the car’s frontal structure. For rating purposes, this cost can be normalised by comparing it to the cost calculated for selected cars. The methodology uses the speed reductions measured in AEB tests to determine the speed at which each casualty in the target population will be impacted. The injury to each casualty is then calculated using the results from standard Euro NCAP pedestrian impactor tests and injury risk curves. This injury is converted into cost using ‘Harm’ type costs for the body regions tested. These costs are weighted and summed. Weighting factors were determined using accident data from Germany and GB and the results of a benefit analysis performed by the EU FP7 AsPeCSS project. This resulted in German and GB versions of the methodology. The methodology was used to assess cars with good, average and poor Euro NCAP pedestrian ratings, with and without a current AEB system fitted. It was found that the decrease in casualty injury cost achieved by fitting an AEB system was approximately equivalent to that achieved by increasing the passive safety rating from poor to average. Also, it was found that the assessment was influenced strongly by the level of head protection offered in the scuttle and windscreen area because this is where head impact occurs for a large proportion of casualties. The major limitation within the methodology is the assumption used implicitly during weighting. This is that the cost of casualty injuries to body areas, such as the thorax, not assessed by the headform and legform impactors, and other casualty injuries such as those caused by ground impact, are related linearly to the cost of casualty injuries assessed by the impactors. A methodology for assessment of integrated pedestrian protection systems was developed. This methodology is of interest to consumer rating programmes which wish to include assessment of these systems. It also raises the interesting issue if the head impact test area should be weighted to reflect better real-world benefit.
During the past five years, a Euro NCAP technical working group on pedestrian safety has been working on improving test and assessment procedures for enhanced passive pedestrian safety. After harmonizing the tools and procedures as much as possible with legislation, the work was mainly focused on the development of grid procedures for the pedestrian body regions head, upper leg with pelvis and lower leg with knee. Furthermore, the test parameters for the head and the upper leg were revised, a new lower legform impactor was introduced and the injury thresholds were adjusted or, where necessary, the injury criteria were changed. Finally, the assessment limits and colour scheme were refined, widening the range and adding two more colours in order to provide a more detailed description of the pedestrian safety performance. By abstaining from an assessment based on a worst point selection philosophy, the improved test point determination procedures that were introduced during the years 2013 and 2014 give a more homogeneous, high resolution picture of the pedestrian safety performance of the vehicle frontends. By using a uniform grid for each test zone approximately 200 test points, evenly distributed within each area, can now be assessed per vehicle. The introduction of the flexible pedestrian legform impactor in 2014 enables a more realistic injury prediction of the knee and the tibia using a biofidelic test tool. With the new upper legform test that has been launched in 2015 the assessment in that area is now focusing on the injured body region instead of the injury causing vehicle part and thus is aligned with the approach in the remaining body regions head and lower leg. At the same time, a monitoring test with the headform impactor against the bonnet leading edge is closing the possible gap between the test areas to identify injury causing vehicle parts that moved out of focus due to the introduction of the new upper legform test. The paper describes the new test and assessment procedures with their underlying philosophy and gives an outlook in terms of open issues, specifying the needs for further improvement in the future. In parallel to the work of the pedestrian subgroup, a Euro NCAP working group on heavy vehicles introduced a set of protocol changes in 2011 that were related to the assessment of M1 vehicles derived from commercial vehicles, with a gross vehicle weight between 2.5 and 3.5 tons and 8 or 9 seats. The paper also investigates the applicability of the new pedestrian test and assessment procedures to heavy vehicles.
Die Transparenz der MPU, und damit des gesamten Systems des Führerscheinrückerhalts, stand in der Vergangenheit vielfach in der Kritik. Einen wesentlichen Beitrag zur Erhöhung der Transparenz liefert die frühzeitige Aufklärung der Betroffenen. Hierzu hatte die BASt im Rahmen einer Arbeitsgruppe neutrale Informationen rund um die MPU für die Zielgruppen Alkohol-, Drogen- und Punkteauffällige zusammengetragen und im Internet (www.bast.de/mpu) bereit gestellt. Ein diese Maßnahme sinnvoll ergänzender Schritt in Richtung Transparenz wären (rechtliche) Regelungen im Bereich der Fahreignungsberatung und fahreignungsfördernden Maßnahmen. Hierzu hat das BMVI die BASt beauftragt, die Arbeitsgruppe fortzusetzen, um ein Konzept zur Qualitätssicherung zu entwickeln. Von der Arbeitsgruppe der BASt wird eine Beratungspflicht bei jedem Entzug/Verzicht der Fahrerlaubnis als Voraussetzung für die Neuerteilung als sinnvolle Maßnahme zur Erhöhung der Verkehrssicherheit empfohlen. Zu einer Verankerung der Beratung im Normensystem wird vorgeschlagen, dass der Nachweis über die Teilnahme bei Antragstellung auf Neuerteilung einer Fahrerlaubnis vorgelegt werden müsse. Die Beratungsinhalte sollten dann in der Fahrerlaubnisverordnung (FeV) definiert sein und die Behörde müsste unmittelbar nach Kenntnis des belastenden Ereignisses den Betroffenen auf die Beratungsverpflichtung hinweisen. So hätte man eine kostengünstige und individuell angemessene Variante als ersten Schritt zur Förderung der Fahreignung. Eine solche Erstberatung sollte Anbieter-neutral erfolgen. Eine Anerkennung von Beratern kann analog den -§-§ 36, 43 FeV oder -§ 4a StVG erfolgen. Da es im Bereich der gesetzlich geregelten verkehrspsychologischen Tätigkeiten äußerst ähnliche Qualifikationsanforderungen gibt, jedoch auf jedwede Tätigkeit beschränkte Anerkennungsverfahren zu durchlaufen sind, wäre ein einheitliches Anerkennungs- und Überwachungsverfahren wünschenswert. Operationalisiert werden könnte dies im Rahmen eines Paragrafen "Verkehrspsychologen--§ (VerkehrsPsych-§)", der im StVG verankert wird.