620 Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
Dokumenttyp
- Buch (Monographie) (13)
- Konferenzveröffentlichung (11)
- Wissenschaftlicher Artikel (8)
- Bericht (2)
Schlagworte
- Risiko (34) (entfernen)
Institut
Bei der Behandlung von sulfathaltigen Böden mit calciumbasierten Bindemitteln wurden immer wieder Schadensfälle beobachtet, die durch die Neubildung von Ettringitmineralen hervorgerufen wurden. Das Ziel des Forschungsprojektes war es, die Grundlagen für die Entwicklung einer praxistauglichen Prüfvorschrift zu erarbeiten. Mit Hilfe geeigneter Untersuchungen und Prüfverfahren soll es zukünftig möglich sein, Schadensfälle zu vermeiden. Dafür waren Kenngrößen und Richtwerte zur Beurteilung des Risikos von Treiberscheinungen durch Ettringitbildung bei der Bindemittelbehandlung von sulfathaltigen Böden festzulegen. Zunächst wurde eine Literaturstudie durchgeführt. Dabei wurde deutlich, dass der Mineralbestand, das Wasserangebot, das chemische Milieu, die Temperatur, die Porenstruktur und der Überlagerungsdruck im Boden wesentliche Einflussfaktoren sind. Im zweiten Arbeitsschritt wurden an vier verschiedenen Materialien Pulverquellversuche durchgeführt. Dabei wurden jeweils zwei Böden mit und ohne natürlichen Sulfatgehalt verwendet. Dem Versuchsmaterial ohne natürlichen Sulfatgehalt wurde Sulfat künstlich, in definierten Mengen zugesetzt. Als Ergebnis der Untersuchung können folgende Zusammenhänge genannt werden:
- Es besteht ein linearer Zusammenhang zwischen dem Sulfatgehalt und der Dehnung infolge Ettringitneubildung.
- Kritische Sulfatgehalte sind zum einen stark abhängig vom Boden (Bodenart) und den darin enthaltenen Mineralphasen, zum anderen werden sie durch die Wahl des Bindemittels beeinflusst. Es konnte bestätigt werden, dass eine Behandlung mit Kalk bei gleichen Randbedingungen größere Hebungsbeträge verursacht, als die Verwendung des Bindemittels Zement.
- Als Ergebnis der Literaturstudie und der Versuche zeigte sich, dass nur eine geringe Gefährdung gegeben ist, wenn Böden mit Sulfatgehalten von weniger als 3.000 ppm mit Zement behandelt werden. Bei einer Behandlung mit Kalk besteht dagegen auch bei geringen Sulfatgehalten im Boden bereits ein Gefährdungspotential für Ettringittreiben.
Die Problematik des Ettringittreibens ist sehr komplex und von vielen Faktoren abhängig. Im Rahmen dieses Forschungsvorhabens konnten jedoch nur einige der Einflussfaktoren untersucht werden. In vielen Punkten besteht weiterhin Forschungsbedarf.
To assess occupant safety in a crash test, criteria associating the measurements made with a crash test dummy to injury risk are necessary. To enable better protection of elderly car occupants the objective of this study was to develop improved thoracic injury criteria for the THOR average male dummy. The development of these criteria is usually based on matched dummy and Post Mortem Human Surrogate (PMHS) tests by relating the obtained PMHS injuries to dummy measurements. This approach is limited, since only a few tests in relevant loading conditions are available and any new test series requires high efforts to be performed due to their complexity and costs. To overcome these limitations and to extend the dataset for the development of THOR dummy chest injury risk functions a simulation-based approach was applied within the EC funded project SENIORS (Safety Enhanced Innovations For older Road Users - www.seniors-project.eu). Within this study frontal impact sled simulations with an FE model representing a THOR average male dummy and matched simulations with a human body model (HBM) representing an elderly car occupant were carried out. The HBM used for this study was the THUMS TUC with modified rib cage, which was developed in SENIORS. The modifications included material and geometry changes aiming to represent an elderly car occupant. The rib fracture risk was predicted with a deterministic approach whereby a rib was considered broken when the strain exceeded an age-dependent threshold. Furthermore, a probabilistic method was applied to predict the probability of sustaining a certain number of fractured ribs by comparing local strain values to the distribution of cortical rib ultimate strain. By relating the output from the HBM simulations to a multi-point dummy injury criterion, injury risk curves were calculated by statistical methods. The wide range of loading conditions resulted in the desired range of injuries and THOR ATD output. The number of fractured ribs predicted by the HBM based on the deterministic prediction method was between 0 and 15. Furthermore, the probabilistic risk for the number of rib fractures equal or greater than two, three or four was calculated for each load case. The THOR rib deflection criterion Rmax was between 18 and 56 mm, while the PC Score was in the range of 2.5 to 7.2. Based on these outputs new risk curves for the predicted deterministic (AIS2+/3+) and probabilistic injury risk were calculated. The new curves show reasonable shapes and significance that provide trust in their application. The new risk curves are compared to risk curves obtained by traditional methods. The results were found similar to previous injury risk functions based on physical tests, which gives a high level of confidence in the chosen approach. The simulation-based approach of matched ATD model vs. HBM simulation was successfully applied. Rmax curves show a slightly better quality than the injury criterion PC Score.
Gemäß Eurocode 1 ist für die Unterbauten von Brücken außerorts eine horizontale Anpralllast von 1500 kN zu berücksichtigen. Gemäß der ZTV-ING ist für die Stiele von Schilderbrücken eine Anpralllast von 100 kN anzusetzen. Im Rahmen des Forschungsvorhabens wurde aufbauend auf einer qualitativen und quantitativen Risikoanalyse sowie der Berechnung der Auftretenswahrscheinlichkeit eine statische Ersatzkraft für ein Anprallereignis anhand dynamischer numerischer FE-Berechnungen berechnet. Die Auftretenswahrscheinlichkeit für P(Anprall mit Todesfolge / km) konnte auf der Grundlage recherchierter Anprallereignisse mit 6,8 x 10-5 / Jahr berechnet werden. Im Rahmen einer qualitativen Risikoanalyse konnte festgestellt werden, dass die Anordnung von Fahrzeugrückhaltesystemen eine deutliche Senkung des Gefährdungsgrades für den Anprallenden und für Dritte bewirkt. Am Gesamtmodell einer Verkehrszeichenbrücke wurden dynamische Berechnungen mit dem Programm Siemens NX durchgeführt. Der Anprallkörper wurde dabei so modelliert, dass der LKW Anprall möglichst realistisch nachempfunden werden kann. Es zeigte sich, dass ein Anprallsockel gemäß Richtzeichnung Riz-Ing VZB 4 eine deutliche Reduzierung des Anprallereignisses in Hinblick auf Geschwindigkeit und einwirkende Masse an die Stütze bewirkt. Die statischen und dynamischen Berechnungen haben zudem gezeigt, dass durch die Berücksichtigung der dynamischen Effekte eine Steigerung der Tragfähigkeit von ca. 90 % durch die Trägheit der Verkehrszeichenbrücke und ca. 50% durch die Dehnrateneffekte zu erwarten ist. Es wird empfohlen die statische Ersatzlast mit H = 100 kN zu berücksichtigen. Der Angriffspunkt der statischen Ersatzlast liegt dabei 1,25 m über OK Fahrbahn. Für die Erhöhung der Querkrafttragfähigkeit und der lokalen Tragfähigkeit der Stütze am Anprallort wird die Anordnung von 2 zusätzlichen Steifen vorgeschlagen. Die beim Aufprall auftretenden Kontaktkräfte zwischen Fahrzeug und Verkehrszeichenbrücke, die um ein Vielfaches höher sind, können mit der so bemessenen Konstruktion mit großen plastischen Verformungen aufgenommen werden, sofern ein Anprallsockel vorhanden ist.
The levels of continuous vehicle automation have become common knowledge. They facilitate overall understanding of the issue. Yet, continuous vehicle automation described therein does not cover "automated driving" as a whole: Functions intervening temporarily in accident-prone situations can obviously not be classified by means of continuous levels. Continuous automation describes the shift in workload from purely human driven vehicles to full automation. Duties of the driver are assigned to the machine as automation levels rise. Emergency braking, e.g., is obviously discontinuous and intensive automation. It cannot be classified under this regime. The resulting absence of visibility of these important functions cannot satisfy " especially in the light of effect they take on traffic safety. Therefore, in order to reach a full picture of vehicle automation, a comprehensive approach is proposed that can map out different characteristics as "Principle of Operation" at top level. On this basis informing and warning functions as well as functions intervening only temporarily in near-accident situations can be described. To reach a complete picture, levels for the discontinuous, temporarily intervening functions are proposed " meant to be the counterpart of the continuous levels already in place. This results in a detailed and independent classification for accident-prone situations. This finally provides for the visibility these important functions deserve.
Die Level kontinuierlicher Fahrzeugautomatisierung sind unter Fahrerassistenzexperten weithin bekannt und erleichtern das Verständnis. Sie können aber nicht Fahrzeugautomatisierung insgesamt zufriedenstellend beschreiben: Insbesondere temporär intervenierende Funktionen, die in unfallnahen Situationen eingreifen, können offensichtlich nicht nach dem Level kontinuierlicher Fahrzeugautomatisierung beschrieben werden. Diese beschreiben nämlich die zunehmende Aufgabenverlagerung vom Fahrer zur maschinellen Steuerung bei zunehmendem Automatisierungsgrad. Notbremsfunktionen, beispielsweise, sind offensichtlich diskontinuierlich und nehmen zugleich auf intensive Weise Einfluss auf die Fahrzeugsteuerung. Sie lassen sich gerade nicht sinnvoll nach dem Level kontinuierlicher Fahrzeugautomatisierung beschreiben. Das Ergebnis kann indes nicht zufriedenstellen: Die fehlende Sichtbarkeit dieser Funktionen wird ihrer Bedeutung für die Verkehrssicherheit nicht gerecht. Daher wird hier, um ein vollständiges Bild der Fahrzeugautomatisierung zu erlangen, ein umfassender Ansatz zur Beschreibung verfolgt, der auf oberster Ebene nach Wirkweise unterscheidet. Auf dieser Basis lassen sich sowohl informierende und warnende Funktionen als auch solche, die nur temporär in unfallgeneigten Situationen intervenieren, im Detail beschreiben. Das ermöglicht es, eine eigenständige Klassifikation für unfallgeneigte Situationen zu erstellen. Dies kann für diese wichtigen Funktionen die eigenständige Sichtbarkeit herstellen, die ihrer Bedeutung gerecht wird.
Injury probability functions for pedestrians and bicyclists based on real-world accident data
(2017)
The paper is focusing on the modelling of injury severity probabilities, often called as Injury Risk Functions (IRF). These are mathematical functions describing the probability for a defined population and for possible explanatory factors (variables) to sustain a certain injury severity. Injury risk functions are becoming more and more important as basis for the assessment of automotive safety systems. They contribute to the understanding of injury mechanisms, (prospective) evaluation of safety systems and definition of protection criteria or are used within regulation and/or consumer ratings. In all cases, knowledge about the correlation between mechanical behavior and injury severity is needed. IRFs are often based on biomechanical data. This paper is focusing on the derivation of injury probability models from real world accident data of the GIDAS database (German In-depth Accident Study). In contrast to most academic terms there is no explicit term definition or definition of creation processes existing for injury probability models based on empirical data. Different approaches are existing for such kind of models in the field of accident research. There is a need for harmonization in terms of the used methods and data as well as the handling with the existing challenges. These are preparation of the dataset, model assumptions, censored/unknown data, evaluation of model accuracy, definition of dependent and independent variable, and others. In the presented study, several empirical, statistical and phenomenological approaches were analyzed regarding their advantages and disadvantages and also their applicability. Furthermore, the identification of appropriate prediction parameters for the injury severity of pedestrians has been considered. Due to its main effect on injuries of pedestrians and bicyclists, the importance of the secondary impact has also been analyzed. Finally, the model accuracy, evaluated by several criteria, is the rating factor that gives the quality and reliability for application of the resulting models. After the investigation and evaluation of statistical approaches one method was chosen and appropriate prediction variables were examined. Finally, all findings were summarized and injury risk functions for pedestrians in real world accidents were created. Additionally, the paper gives instructions for the interpretation and usage of such functions. The presented results include IRFs for several injury severity levels and age groups. The presented models are based on a high amount of real world accidents and describe very well the injury severity probability of pedestrians and bicyclists in frontal collisions with current vehicles. The functions can serve as basis for the evaluation of effectiveness of systems like Pedestrian-AEB or Bicycle-AEB.
The objectives of this paper are the analysis of the accident risk of drivers brain pathologies (Mild Cognitive Impairment, Alzheimer- disease, and Parkinson- disease), and the investigation of the impact of driver distraction on the accident risk of patients with brain pathologies, through a driving simulator experiment. The three groups of patients are compared to a healthy group of similar demographics, with no brain pathology. In particular, 125 drivers of more than 55 years old (34 "controls"" and 91 "patients") went through a large driving simulator experimental process, in which incidents were scheduled to occur. They drove in rural and urban areas, in low and high traffic volumes and in three distraction conditions (undistracted driving, conversation with a passenger and conversation through a mobile phone). The statistical analyses indicated several interesting findings; brain pathologies affect significantly accident risk and distraction affects more the groups of patients than the control one.
In-depth accident investigation offers many advantages for the analysis and comprehension of crash mechanisms. IFSTTAR makes such investigations since 1992 without interruption. The corresponding database contains more than 1200 accident case studies. Currently, in-depth accident investigation is one of the best ways to determine the speed or cars involved in accidents. This paper first presents the methods used for accident investigation and for accident kinematic reconstruction. Then, in order to illustrate the interest and possible applications of such accident data, it shows some results from a recent study based on the IFSTTAR in-depth accident study programme (IDAS) and dealing with the link between travelling speed and accident risk.
The incidence of side impacts was investigated from GIDAS data. Both vehicle-fixed object and vehicle-vehicle collisions were analysed as these are enclosed within the consumer testing program. Vehicle-fixed object collisions were stratified according to ESC availability. Results indicated that vehicles equipped with ESC rarely have pure-lateral impacts. An increase in oblique collisions was seen for the vehicles with ESC whereby most vehicle were driving in left curves. The analysis of vehicle-vehicle collisions developed injury risk curves were developed at the AIS3+ injury severity for the vehicle-vehicle side impacts. Results suggested that greatest injury risk occurred when a Pre Euro NCAP vehicle was struck by a Post Euro-NCAP vehicle. The remaining curves did not show different behaviour, indicating that stiffness increased have been equally combated. This was attributable to the few Post Euro-NCAP vehicles that had a deployed curtain airbag available in the sample. The integration of Euro NCAP testing has shown to improve vehicle crashworthiness for pole collisions, as those vehicles with ESC rarely incur lateral impacts.
Die Beurteilung der technischen und unfallrelevanten Eigenschaften der beiden Scheibenarten zeigt, dass die VSG-Scheibe gegenüber der ESG-Scheibe hinsichtlich der Verletzungs- und Unfallgefahr zwar überwiegend Vorteile aufweist; diese Vorteile sind jedoch vor allem vor dem Hintergrund steigender Gurtanlegequoten nicht als so entscheidend anzusehen, dass daraus die Begründung für ein Verbot der ESG-Scheibe abzuleiten wäre. Diese Feststellung wird insbesondere auch gestützt durch eine Nutzen-Kosten-Betrachtung, die zeigt, dass aus gesamtwirtschaftlicher Sicht bei einem generellen Ersatz der ESG-Scheibe durch die teurere VSG-Scheibe bei günstigen Annahmen der Nutzen unter den Kosten liegen würde.