Sonstige
Filtern
Erscheinungsjahr
- 2017 (119) (entfernen)
Dokumenttyp
- Konferenzveröffentlichung (52)
- Buch (Monographie) (48)
- Wissenschaftlicher Artikel (12)
- Bericht (5)
- Teil eines Buches (Kapitel) (2)
Schlagworte
- Deutschland (77)
- Germany (77)
- Conference (38)
- Forschungsbericht (38)
- Konferenz (37)
- Research report (37)
- Accident (28)
- Unfall (28)
- Bewertung (24)
- Evaluation (assessment) (23)
Im Rahmen dieser Begleitstudie zum Feldversuch mit Lang-Lkw wurde untersucht, wie die technischen Anforderungen der Verordnung über Ausnahmen von straßenverkehrsrechtlichen Vorschriften für Fahrzeuge und Fahrzeugkombinationen mit Überlänge (LKWÜberlStVAusnV) von teilnehmenden Speditionen umgesetzt wurden. Die Studie fußt auf den der BASt von den am Feldversuch teilnehmenden Speditionen zur Verfügung gestellten Daten sowie Fahrzeugbegutachtungen. Sie bildet den Stand vom 15.07.2013 mit 43 Lang-Lkw von 23 Speditionen ab. 31 Lang-Lkw vom Typ 3 bilden hierbei den größten Anteil. Alternative Umsetzungsmöglichkeiten technischer Anforderungen wurden speziell bei Achslastüberwachungssystemen und Kamera-Monitor-Systemen am Heck betrachtet. Die Achslastüberwachungssysteme weisen keine Spezifikationen hinsichtlich ihrer Genauigkeit auf. Probemessungen zeigten jedoch eine hinreichende Genauigkeit, um etwaige Überladungszustände transparent zu machen. Mit den Kamera-Monitor-Systemen können Objekte hinter dem Fahrzeug erkannt werden, eignen sich jedoch je nach Kameraposition eher zur Beobachtung des rückwaertigen Verkehrs oder als Rückfahrhilfe. Durch Simulationen und Fahrversuche wurde das Kurvenlaufverhalten der Fahrzeuge entsprechend -§ 32d der StVZO ("BO-Kraftkreis") überprüft. Es zeigte sich hierbei, dass die Prüfvorschriften nicht hinreichend genau definiert sind und sich speziell für Lang-Lkw je nach Auslegung unterschiedliche Werte ergeben können. Die Studie zeigt weiter, dass Lang-Lkw gegenüber Lkw herkömmlicher Bauart bei einem Gesamtgewicht von 40 t einen kürzeren Bremsweg aufweisen und keine erhöhte Sogwirkung auf Zweiräder ausüben. Darüber hinaus werden Unterschiede in der Fahrdynamik durch Simulationen aufgeschlüsselt, wodurch auf weiteren Forschungsbedarf hingewiesen wird. In Fragebögen wurde die Wirksamkeit der hinteren Beschilderung der Lang-Lkw untersucht. Die Befragung zeigte eine höhere Wirksamkeit von Piktogrammen, welche gegenüber Aufschriften zu bevorzugen sind. Die Auswertung von Flottentelematikdaten ergab eine CO2-Reduktion eines Lang-Lkw von rund 15 % gegenüber Lkw herkömmlicher Bauart, wenn beide Fahrzeuge die gleiche Güterart transportieren.
Systematische Untersuchungen zur Belastung der Straßenabflüsse mit organischen Schadstoffen, die z. B. in Weichmachern, Tensiden, Klebstoffen, Lacken, Korrosionsschutzadditiven, Benzinzusätzen, Vulkanisierungsbeschleunigern bzw. Alterungsschutzmitteln (Antioxidans) zur Herstellung von Reifen enthalten sind, lagen bislang nicht vor. Im Rahmen dieses Vorhabens sind an drei Autobahnstandorten an der A6 (Sinsheim-Steinsfurt), A7 (Großburgwedel) und der A37 (Hannover-Kirchhorst) über den Zeitraum eines Jahres von Oktober 2011 bis September 2012 die direkten Straßenabflüsse beprobt worden. Als Parameter wurden Bezothiazole, Alkylphenole, Bisphenol A, Methyl-tert-butylether (MTBE), Bis(2-ethylhexyl)phtahalat DEHP), PAK, PCB, AOX/EOX, MKW sowie zusätzlich die Schwermetalle Zn, Cu, Pb und Cd untersucht. Die Eigenschaften der organischen Schadstoffe bedingten besondere Anforderungen an die Probenahmeeinrichtung, die Probenahme und die Analytik. Es wurden großvolumige Probensammelbehälter (rd. 900 l Inhalt) aus Edelstahl eingesetzt, die im freien Gefälle über eine Auffangwanne am Bankett und eine Edelstahlrinne mit dem direkten Abfluss der Verkehrsflächen befüllt wurden. Eine Behälterfüllung entsprach rd. 35 mm Niederschlagsabfluss. Es konnten standortabhängig zwischen 61% bis 82% des gesamten Niederschlagsabflusses über den Zeitraum eines Jahres beprobt werden. Nach Füllung der Behälter oder spätestens nach einem Monat wurden nach einer Absetzzeit von ≥ 3 Tagen das Überstandwasser und das Sediment im Behälter getrennt beprobt. Dadurch wurde bei den partikelgebundenen Analyten ein hoher Abstand der Messwerte von der Bestimmungsgrenze erzielt und damit eine höhere Messgenauigkeit erreicht. Die Proben wurden zunächst eingefroren und später abflussvolumenproportional zu Quartalsmischproben vereinigt und analysiert. In Vorversuchen wurde der Einfluss der Veränderung der Probenbeschaffenheit nach der max. 1-monatigen Standzeit im Probensammelbehälter untersucht und für die betrachteten Parameter für akzeptabel befunden. Die Schwermetall-Gesamtgehalte liegen im typischen Konzentrationsbereich von Straßenabflüssen mit hohen partikulären Anteilen (Zn > 77 %, Cu > 81 %, Pb > 91 %). Lediglich bei Cd liegt der partikelgebundene Teil mit 41"54 % deutlich niedriger. Für die Schwermetalle ist ein deutlicher Konzentrationsjahresgang mit Höchstwerten im Winter zu verzeichnen. Die Gesamtkonzentrationen für die organischen Analyten wurden mit den partikulären Anteilen (vgl. Tabelle 5-19 im Bericht) ermittelt. Für MTBE, ETBE, MBT und MeBT wurden weder in Lösung noch im Sediment Konzentrationen oberhalb der Nachweisgrenze gemessen. Für Benzol, Bisphenol A, Nonylphenol und Octylphenol konnten aufgrund der hohen Bestimmungsgrenzen im Wasser keine partikulären Anteile ermittelt werden. Die ermittelten Werte für PAK-16 und MKW treten in Straßenabflüssen häufig auf. Bezogen auf die anderen untersuchten organischen Schadstoffe liegen aus anderen Untersuchungen keine vergleichbar repräsentativen Messungen vor. Die hohen Maximalwerte einer Stichprobenuntersuchung an Autobahnen (Stachel et al. 2007) wurden nicht bestätigt. Für MKW, PAK-16, PCB-6 und DEHP konnte einheitlich ein hoher partikulärer Anteil (> 83 %) festgestellt werden. Für die 3 Benzothiazole (MTBT, BT, OHBT) liegt der partikuläre Anteil bei bis zu 53 %. Beim BTSA ergaben zwei Standorte kleine (≤ 10%) und ein Standort einen hohen partikulären Anteil (79 %). Ein first flush Effekt wurde nicht nachgewiesen. Die Schadstoffkonzentrationen direkt aufeinander folgender großer Ereignisse waren sehr ähnlich. Die Poren im Fahrbahnbelag des Standstreifens wirken wie ein Sedimentdepot, das sich über längere Zeit entleert. Bezogen auf die Regenwasserbehandlung kommt dem Rückhalt der Feinpartikel wegen des hohen partikulären Anteils der untersuchten Schadstoffe besondere Bedeutung zu.
In-depth accident investigation offers many advantages for the analysis and comprehension of crash mechanisms. IFSTTAR makes such investigations since 1992 without interruption. The corresponding database contains more than 1200 accident case studies. Currently, in-depth accident investigation is one of the best ways to determine the speed or cars involved in accidents. This paper first presents the methods used for accident investigation and for accident kinematic reconstruction. Then, in order to illustrate the interest and possible applications of such accident data, it shows some results from a recent study based on the IFSTTAR in-depth accident study programme (IDAS) and dealing with the link between travelling speed and accident risk.
Interdisciplinary accident research and research projects of AARU Audi Accident Research Unit
(2017)
AARU (Audi Accident Research Unit) is an interdisciplinary research project of the University Hospital Regensburg in cooperation with AUDI AG. Specific objective is to comprehend the respective accident scenario and retrieve generally applicable findings as to technical, medical and psychological processes. In order to prevent traffic accidents and to alleviate vehicle accident consequences, postulates of general traffic safety, human-machine interaction, technical design and function of new vehicles and occupant as well as third party protection shall be inferred from these findings. Specifically, each accident with new Audi, Lamborghini and Ducati vehicles involved is analyzed interdisciplinary, discussed in a case meeting and anonymously documented with more than 2,000 parameters. The database is continually used for solving safety relevant issues. Parallel to accident analysis, research projects are performed in the fields medicine, psychology and engineering in order to gain comprehensive insight and identify potential additional areas of activity of accident research.
Durch die in den letzten Jahren enorm gestiegenen Verkehrsbelastungen und damit einhergehenden gestiegenen lokalen Beanspruchungen im Deckblech kommt es bei bestehenden Stahlbrücken mit orthotropen Fahrbahnplatten vermehrt zu Ermüdungsschäden im Bereich der geschweißten Anschlüsse der Längsrippen an das Deckblech (Kategorie-1-Schäden). Der vorliegende Beitrag gibt einen Übernblick über existierende Verstärkungsmaßnahmen, die bereits in Pilotprojekten erprobt wurden sowie aktuelle Forschungsarbeiten zur Verstärkung von orthotropen Fahrbahnplatten mit Kategorie-1-Schaeden.
Injury probability functions for pedestrians and bicyclists based on real-world accident data
(2017)
The paper is focusing on the modelling of injury severity probabilities, often called as Injury Risk Functions (IRF). These are mathematical functions describing the probability for a defined population and for possible explanatory factors (variables) to sustain a certain injury severity. Injury risk functions are becoming more and more important as basis for the assessment of automotive safety systems. They contribute to the understanding of injury mechanisms, (prospective) evaluation of safety systems and definition of protection criteria or are used within regulation and/or consumer ratings. In all cases, knowledge about the correlation between mechanical behavior and injury severity is needed. IRFs are often based on biomechanical data. This paper is focusing on the derivation of injury probability models from real world accident data of the GIDAS database (German In-depth Accident Study). In contrast to most academic terms there is no explicit term definition or definition of creation processes existing for injury probability models based on empirical data. Different approaches are existing for such kind of models in the field of accident research. There is a need for harmonization in terms of the used methods and data as well as the handling with the existing challenges. These are preparation of the dataset, model assumptions, censored/unknown data, evaluation of model accuracy, definition of dependent and independent variable, and others. In the presented study, several empirical, statistical and phenomenological approaches were analyzed regarding their advantages and disadvantages and also their applicability. Furthermore, the identification of appropriate prediction parameters for the injury severity of pedestrians has been considered. Due to its main effect on injuries of pedestrians and bicyclists, the importance of the secondary impact has also been analyzed. Finally, the model accuracy, evaluated by several criteria, is the rating factor that gives the quality and reliability for application of the resulting models. After the investigation and evaluation of statistical approaches one method was chosen and appropriate prediction variables were examined. Finally, all findings were summarized and injury risk functions for pedestrians in real world accidents were created. Additionally, the paper gives instructions for the interpretation and usage of such functions. The presented results include IRFs for several injury severity levels and age groups. The presented models are based on a high amount of real world accidents and describe very well the injury severity probability of pedestrians and bicyclists in frontal collisions with current vehicles. The functions can serve as basis for the evaluation of effectiveness of systems like Pedestrian-AEB or Bicycle-AEB.
Europe has benefited from a decreasing number of road traffic fatalities. However, the proportion of older road users increases steadily. In an ageing society, the SENIORS project aims to improve the safe mobility of older road users by determining appropriate requirements towards passive vehicle safety systems. Therefore, the characteristics of road traffic crashes involving the elderly people need to be understood. This paper focuses on car occupants and pedestrians or cyclists in crashes with modern passenger cars. Ten crash databases and four hospital statistics from Europe have been analysed to answer the questions on which body regions are most frequently and severely injured in the elderly, and specific injuries sustained by always comparing older (65 years and above) with midâ€aged road users (25â€64 years). It was found that the body region thorax is of particularly high importance for the older car occupant with injury severities of AIS2 or AIS3+, where as the lower extremities, head and the thorax need to be considered for older pedestrians and cyclists. Further, injury risk functions were provided. The hospital data analysis showed less difference between the age groups. The linkage between crash and hospital data could only be made on a general level as their inclusion criteria were quite different.
Recently, EuroNCAP updated the upper legform test protocols. The main objective of this study is to establish the upper legform test in KIDAS (Korean In-depth Accident Study) taking into account domestic pedestrian accident data as well as anthropometric data to protect elderly pedestrians whose average height and weight is much smaller and lighter than other age groups, especially compared to Europeans. Therefore 230 cases of pedestrian accidents from KIDAS were investigated to explore the injury severity of body regions as well as age related injury patterns. Injuries of all body regions were examined, with a special focus on injuries of abdomen and pelvic area. On the other hand, in order to explore Korea's pedestrian accident environment, national police data and KIDAS (Korean In-depth Accident Study) data were compared. The results should be taken into account in future analyses and possible improvements, such as regulations and KNCAP test protocols, of the pedestrian safety policy in Korea.
This work describes the results of the experimental activity, illustrating the driving behavior observed in different conditions, relating them to the different methods of ADAS intervention and comparing the driver behavior without ADAS. In the present study, driver behavior was studied in road accidents involving elderly pedestrians, with different ADAS HMIs, as a base to develop a driver model in near missing pedestrian accidents. A literature research was conducted with the aim of finding out the main influencing factors, including environment, boundary conditions, configuration of impact, pedestrian and driver information, when pedestrian fatalities occur and an analysis of frequent road accidents was conducted to get more detailed information about the driver- behavior. In order to obtain more detailed information about pedestrian accidents, real road accidents were reconstructed with multibody simulations on PC-Crash and, by the comparison between literature findings and reconstructions, a generic accident scenario was defined. The generic accident scenario was implemented on the full scale dynamic driving simulator in use at the Laboratory for Safety and Traffic Accident Analysis (LaSIS, University of Florence, Italy) in order to analyse the driving behaviors of volunteers, also considering the influence of ADAS devices. Forty-five young volunteers were enrolled for this study, resulting in forty valid tests on different testing scenarios. Two different scenarios consisted in driving with or without ADAS in the vehicle. Different kinds of ADAS, acoustic and optical, with different time of intervention were tested in order to study the different reactions of the driver. The tests showed some interesting differences between driver's behavior when approaching the critical situation. Drivers with ADAS reacted earlier, but more slowly, depending also on the type of alarm, and often with double reaction when braking. In fact, the results of the activity showed that with ADAS intervention the time to collision (TTC) increases, but the reaction time and braking modality change: a) there is a sort of "latency" time between the accelerator pedal release and the brake pressure; b) the brake pressure is initially less intense. So the driver only partially takes advance from the TTC increase. These differences were valued not only qualitatively, but quantitatively as well. This work revealed to be useful to improve the knowledge of drivers" behavior, in order to realize a driver model that can be implemented to help attaining and assessing higher levels of automation through new technology.
Bus or heavy vehicle passenger accidents are rare events, compared with car accidents, but sometimes leads to a large number of victims especially in rollover crash scenarios. Two accidents occurred in Portugal in 2007 and 2013 in which 28 people died and more than 50 are injured, shown the importance of the investigation of such accidents. For the investigation of these accidents multidisciplinary teams are constituted with engineers and police officers. All the factors involved are taken into consideration including road design, traffic signs, maintenance and hardware, human factors, and vehicle factors. In this work a methodology to an accurate collection of the data is proposed. From the information collected the accident is reconstructed using the PC-CrashTM software. From this all the contribution factors are determined and recommendations to mitigate these crashes are listed. These two accidents are rollover accidents and the analysis of the injuries and its correlation with the use of retention systems is very important. From the medical data and with the dynamics of the accident determined simulations of the occupants with biomechanical models are carried out in order to evaluate the effect of the retention systems in the injuries. This analysis is based on injury criteria (such as Abbreviated Injury Score (AIS) or Injury Severity Scale (ISS)). With this it is possible to determine if the seat belt was worn or not.