Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
- Buch (Monographie) (386)
- Konferenzveröffentlichung (151)
- Bericht (15)
- Wissenschaftlicher Artikel (13)
- Arbeitspapier (7)
- Teil eines Buches (Kapitel) (3)
Schlagworte
- Germany (575) (entfernen)
The current paper reports on the results of a pilot study aiming to investigate the effect of mobile telephone use on the driving performance of 5 amateur and 5 professional drivers. Their driving acuity was tested through a driving simulator. Analysis and interpretation of the results occurred comparing the drivers' driving performance while talking, reading messages and writing a message on the mobile phone (intervention time) with the drivers' driving performance engaged in no activity (control time). The variables affected by the mobile phone were the "steering", the "lane offset" and the "duration of lane offset". Moreover, the drivers involved in a car crash in the last five years appeared to differ from those who were not involved in a crash in both "lane offset" and "following distance". The results of this pilot study will inform the design of a large experimental study on 50 professional and 50 amateur drivers.
Although the annual traffic accident statistics published by the national police is available in public, the detailed traffic accident data has not been released in Korea. Recently the Ministry of Land, Infrastructure and Transport recognized the importance of in-depth accident data to enhance road traffic safety and initiated a research project to establish a collection of the detailed accident data. The main objective of the project is a feasibility study to establish KIDAS (Korea In-Depth Accident Study). Within this project, three university hospitals which are located in mid-size cities have been selected to collect accident data. Annually, more than 500 cases of accidents have been collected from the in-patient's interviews and diagnosis. Unlike GIDAS (German In-Depth Accident Study), currently on-site investigation can"t be performed by the Korean police. The only available data is patient medical records, patient's description of accident circumstances and the damaged vehicle. Occasionally the police provide the accident investigation reports containing very brief information on accident causation and vehicle safety. In a first step, the concept of KIDAS is to adopt the format of iGLAD (Initiative for the Global Harmonization of Accident Data) for harmonization. Since the currently collected accident information is extremely limited compared with GIDAS, the other sources of data and calculations such as KNCAP vehicle data, pc-crash simulations, vehicle registration information, insurance company data are utilized to complete the iGLAD template. Results from KIDAS_iGLAD and the cases of assessment of active safety devices such as AEBS, ESC, and LDWS will be evaluated.
Road accidents are typically analyzed to address influences of human, vehicle, and environmental (primarily infrastructure) factors. A new methodology, based on a "Venn diagram" analysis, gives a broader perspective on the probable factors, and combinations of factors, contributing both to the occurrence of a crash and to sustaining injuries in that crash. The methodology was applied to 214 accidents on the Mumbai-Pune expressway. Factors contributing to accidents and injuries were addressed. The major human factors influencing accidents on this roadway were speeding (30%) and falling asleep (29%), while injuries were primarily due to lack of seat belt use (46%). The leading infrastructure factor for injuries was impact with a roadside manmade structure (28%), and the main vehicle factor for injuries was passenger compartment intrusion (73%). This methodology can help identify effective vehicle and infrastructure-related solutions for preventing accidents and mitigating injuries in India.
Injury severity of e.g. pedestrians or bikers after crashes with cars that are reversing is almost unknown. However, crash victims of these injuries can frequently be seen in emergency departments and account for a large amount of patients every year. The objective of this study is to analyze injury severity of patients that were crashed into by reversing cars. The Hannover Medical School local accident research unit prospectively documented 43,000 road traffic accidents including 234 crashes involving reversing cars. Injury severity including the abbreviated injury scale (AIS) and the maximum abbreviated injury scale (MAIS) was analyzed as well as the location of the accident. As a result 234 accidents were included into this study. Pedestrians were injured in 141 crashes followed by 70 accidents involving bikers. The mean age of all crash victims was 57 -± 23 years. Most injuries took place on straight stretches (n = 81) as well as parking areas (n = 59), entries (n = 36) or crossroads (n = 24). The AIS of the lower extremities was highest followed by the upper extremities. The AIS of the neck was lowest. The mean MAIS was 1.3 -± 0.6. The paper concludes that the lower extremities show the highest risk to become injured during accidents with reversing cars. However, the risk of severe injuries is likely low.
Ruptures and dissections of the thoracic and abdominal aortic vessel caused by traffic accidents are rare but potentially life-threatening injuries. They can occur by blunt trauma via seat belt or dashboard injury. The study aimed at evaluating the overall mortality, morbidity, neurological disorders, and differences in operative procedures of open repair and stenting. It shows that, with a change and improvement in diagnostic tools and surgical approach, mortality and morbidity of blunt aortic injuries were significantly reduced. Still an immediate life-threatening injury early diagnosis via multiple-slice and scans and surgical repair with minimally invasive stents showed excellent short-time results for selected patients.
Assessment of the effectiveness of Intersection Assistance Systems at urban and rural accident sites
(2015)
An Intersection Collision Avoidance System is a promising safety system for accident avoidance or injury mitigation at junctions. However, there is still a lack of evidence of the effectiveness, due to the missing real accident data concerning Advanced Driver Assistance Systems. The objective of this study is the assessment of the effectiveness of an Intersection Collision Avoidance System based on real accidents. The method used is called virtual pre-crash simulation. Accidents at junctions were reconstructed by using the numerical simulation software PC-Crashâ„¢. This first simulation is called the baseline simulation. In a second step the vehicles of these accidents were equipped with an Intersection Collision Avoidance System and simulated again. The second simulation is called the system simulation. In the system simulation two different sensors and four different intervention strategies were used, based on a time-to-collision approach. The effectiveness of Intersection Collision Avoidance System has been evaluated by using an assessment function. On average 9% of the reviewed junction accidents could have been avoided within the system simulations. The other simulation results clearly showed a change in the principal direction of force, delta-v and reduction of the injury severity.
The main focus of the benefit estimation of advanced safety systems with a warning interface by simulation is on the driver. The driver is the only link between the algorithm of the safety system and the vehicle, which makes the setup of a driver model for such simulations very important. This paper describes an approach for the use of a statistical driver model in simulation. It also gives an outlook on further work on this topic. The build-up process of the model suffices with a distribution of reaction times and a distribution of reaction intensities. Both were combined in different scenarios for every driver. Each scenario has then a specific probability to occur. To use the statistical driver model, every accident scene has to be simulated with each driver scenario (combinations of reaction times and intensities). The results of the simulations are then combined regarding the probabilities to occur, which leads to an overall estimated benefit of the specific system. The model works with one or more equipped participants and delivers a range for the benefit of advanced safety systems with warning interfaces.
Event data recorders (EDRs) are a valuable tool for in-depth investigation of traffic accidents. EDRs are installed on the airbag control module (ACM) to record vehicle and occupant information before, during, and after a crash event. This study evaluates EDR characteristics and aims at better understanding EDR performance for the improvement of accident reconstruction with more reliable and accurate information regarding accidents. The analysis is based on six crash tests with corresponding EDR datasets.
The study aimed at estimating the impact of pedelecs (with an assumed higher speed than bicycles) on the traffic accident severity in Germany for different penetration rates. The analysis shows that in many real situations (68%) an electrical support of bicycles has no influence on the sequence of accident events. Taking into account a number of unreported "single bicycle accidents", the adoption of similar traffic behavior and similar age distribution, the authors determined a shift of 400 former slightly to seriously injured cyclists in Germany per year. Overall this would be an increase of approximately 2.3% in case of 10% of pedelec penetration with the pessimistic assumption of 10 km/h speed increase although first natural driving studies predict a much lower average speed increase of pedelecs. The hypothesis verbalized in the initial question whether a higher distribution of pedelecs will result in more severe accidents in Germany is not verified. The study shows that electrical support didn"t result in higher collision speed in general. In many accident situations, the speed of pedelecs has only a minor influence on the accident severity. Further research focusing on a possible change of driver behavior especially in new target groups (elderly people) will be needed.
The Traffic Accident Research Institute at University of Technology Dresden investigates about 1,000 accidents annually in the area around and in Dresden. These datasets have been summarized and evaluated in the GIDAS (German Accident In-Depth Study) project for 13 years. During the project it became apparent that the specific traffic situation of a covert exit of a passenger car and an intersecting two-wheeler involves a high risk potential. This critical situation develops in a large part due to the lack of visibility between the driver and the intersecting bike. In this paper the accident avoidance potential of front camera systems with lateral field of view, which allows the driver to have an indirect sight into the crossing street area will be presented.
In North America, frontal crash tests in both the regulatory environment and consumer-based safety rating schemes have historically been based on full-width and moderate-overlap (40%) vehicle to barrier impacts. The combination of improved seat-belt technologies, notably belt tensioning and load limiting systems, together with advanced airbags, has proven very effective in providing occupant protection in these crash modes. Recently, however, concern has been raised over the contribution of narrower frontal impacts, involving primarily the vehicle corners, to the incidence of fatality and serious injury as a result of the potential for increased occupant compartment intrusion and performance limitations of current restraint systems. Drawing on data documented in the National Automotive Sampling System (NASS)/ Crashworthiness Data System (CDS) for calendar years 1999 to 2012, the present study examines the characteristics of existing and proposed corner crash test configurations, and the nature of real-world collisions that approximate the test environments. In this analysis, particular emphasis is placed on crash pulse information extracted from vehicle-based event data recorders (EDR's).
Analysis of pedestrian leg contacts and distribution of contact points across the vehicle front
(2015)
Determining the risk to pedestrians that are impacted by areas of the front bumper not currently regulated in type-approval testing requires an understanding of the target population and the injury risk posed by the edges of the bumper. National statistics show that approximately 10% of all accident casualties are pedestrians, with 20% to 30% of these pedestrian casualties being killed or seriously injured. However, the contact position across the front of the bumper is not recorded in national statistics and so in-depth accident databases (OTS, UK and GIDAS, Germany) were used to examine injury risk in greater detail. The results showed that some injury types and severities of injuries appear to peak around the bumper edges. Although there are sometimes inconsistencies in the data, generally there is no evidence to suggest that the edges of the bumper are less likely to be contacted or cause injury.
Many safety-relevant tasks in control or diagnostics require binary choices such as "conflict versus separation" in air traffic control, "normal versus pathological" when interpreting x-ray pictures, or "permitted versus forbidden" when inspecting airport security scans. Deciders often are uncertain, but nevertheless required to decide between two alternatives, that is, they have not only to decide upon an action, but also about the admissible level of uncertainty. If the accepted level of judgment certainty is not taken into account, the sequence of decisions does not capture the full picture of the underlying decision process. Differences in judgment certainty are relevant, because they reflect not only the adequacy of the human-machine interface that is evaluated, but also the differences in expertise of the decider and the requirements of the actual situation or task. Therefore, capturing both judgment certainty and discrimination performance is essential. A comparison of different human-machine-interfaces (for air traffic control) is used to illustrate a methodological approach, which allows for integrated analyses of decision processes based on receiver-operator-characteristics and practical guidelines for the evaluation of human-machine-interfaces for safety-relevant operation procedures are provided.
Detailed anthropometric data of pregnant women have been collected and used in the development of a computational model of the pregnant occupant model "Expecting". The model is complete with a finite element uterus and multi-body fetus, which is a novel feature in the models of this kind. The computational pregnant occupant model has been validated and used to simulate a range of impacts. The strains developed in the utero-placental interface are used as the main criteria for fetus safety. Stress distributions due to inertial loading of the fetus on the utero-placental interface play a role on the strain levels. Inclusion of fetus model is shown to significantly affect the strain levels in the utero-placental interface. This series of studies has led to the design of seatbelt features specifically for the pregnant women to enable them use the seatbelt correctly and comfortably.
SEEKING is looking for answers regarding electric powered bicycles and their relation to traffic safety issues. Does a cyclist need "E"? Is it as risky as riding a moped or are E-bikes creating conflicts with other cyclists? The project described herein, funded by the Austrian Ministry of Transport, has the aim of seeking answers to these hot topics. The SEEKING-team shows an in-depth investigation of vehicle dynamic sensing, together with subjective feedback of test riders to detect similarities and differences between conventional cycling and E-biking. Following an overview on the international status quo, measurement runs and their analyses are performed to find a set of preventative measures to make (E-)biking safer. A specific focus is the detection of curve handling, stopping and acceleration phases as well as conflict studies on course-based test rides and "real world" tests on cycling paths (naturalistic riding).
Aufgabe der Studie war eine erstmalige umfassende Erhebung der Ausstattung der Pkw in Deutschland mit Fahrzeugsicherheitssystemen. Dazu wurden 5.070 Haushalte zur Ausstattung eines ihnen zur Verfügung stehenden Fahrzeugs befragt. Für die Befragung wurden 53 Fahrzeugsicherheitssysteme ausgewählt. Darunter sind neue Systeme wie Stauassistenten und Kreuzungsassistenten sowie auch weitgehend etablierte Systeme wie die Fahrdynamikregelung (ESP) und Airbags. Neben den Nutzern wurden auch Experten befragt, die beruflich mit dem Ein- oder Verkauf von Pkw für Unternehmensflotten befasst sind. Diese zehn qualitativen Interviews geben einen Einblick in die Bedeutung verschiedener Kriterien bei der Fahrzeugwahl und speziell den Stellenwert von Fahrzeugsicherheitssystemen. Die weiteste Verbreitung haben passive Sicherheitssysteme wie Airbags, die darauf abzielen, die Folgen eines Unfalls für die Beteiligten abzumildern. Aber auch aktive und intervenierende Systeme, die Risiken vermeiden oder einzelne Fahraufgaben übernehmen, gehören häufig zur Fahrzeugausstattung. Die häufigsten Vertreter aus dieser Gruppe sind der Bremsassistent, ESP und der Tempomat. Die meisten Fahrzeugsicherheitssysteme sind in Fahrzeugen der oberen Mittelklasse und Oberklasse zu finden. Mit der jährlichen Fahrleistung und der Nutzungshäufigkeit nimmt die Anzahl der Sicherheitssysteme ebenso zu wie bei jüngeren Fahrzeugen und Dienstwagen. Die Ergebnisse zeigen ein Muster: Sind Systeme insgesamt selten, unterscheiden sich die Anteile innerhalb der verschiedenen Fahrzeugsegmente teilweise erheblich. Neue Systeme sind dann in den Fahrzeugen der oberen Mittelklasse und Oberklasse deutlich häufiger zu finden und in den Minis und Kleinwagen teilweise mit nicht messbaren Anteilen. Die Experteninterviews, die mit Flottenbetreibern und Fahrzeugverkäufern geführt wurden, zeigen, dass solche Fahrzeugsicherheitssysteme in die Standardausstattung aufgenommen werden, deren Nutzen nachgewiesen ist.
Die temperierte Straße
(2013)
Eine temperierte Straße? Bei genauerer Betrachtung weist die Vision einer temperierten Fahrbahnoberfläche überzeugende Vorteile auf und ist technisch bereits heute umsetzbar, wie eine Reihe von Projekten weltweit belegt. Im Rahmen der vorgestellten Machbarkeitsstudie wurden die Möglichkeiten und Grenzen einer Fahrbahntemperierung untersucht. Unter Berücksichtigung unterschiedlicher Asphalt- und Speicherkonzepte sowie der in Deutschland vorherrschenden geologischen und klimatischen Randbedingungen erfolgte eine Auswertung der Wirksamkeit und Wirtschaftlichkeit eines energetischen Gesamtsystems aus Fahrbahn, Speicher und Gebäude. Die Studie stellt die Rahmenbedingungen für eine Realisierung einer solchen Anlage dar. In vorangegangenen Forschungsvorhaben wurde deutlich, dass sich mit einer Fahrbahnheizung, abgesehen vom volkswirtschaftlichen Nutzen, aus der gesteigerten Verkehrssicherheit nur ein geringer betriebswirtschaftlicher Nutzen aus eingesparten Winterdiensteinsätzen erzielen lässt. Im nächsten Schritt wurde daher der Nutzen einer Kühlung der Fahrbahndecke im Sommer, die sich insbesondere bei Asphaltdeckschichten als vorteilhaft erweist, in die Betrachtung einbezogen. Bei den zugehörigen thermodynamischen Simulationen zeigte sich ein erheblicher Energieüberschuss in der Jahresbilanz. Daher war es nur folgerichtig, für diese Energie mögliche Abnehmer zu suchen. Im Gegensatz zu den erst im Verlauf des Nutzungszeitraums entstehenden Einsparungen aus der Kühlung der Fahrbahnoberfläche können aus einem solchen Verkauf erneuerbarer Energie ganz konkret und kurzfristig Einnahmen generiert werden. Es zeigt sich, dass mit der ganzjährigen Klimatisierung angrenzender Gebäude zwar Einnahmen erzielt werden können, die Wirtschaftlichkeit aber durch die Kosten für die Speicherung bestimmt wird. Letztlich scheint die Umsetzung einer solchen Anlage immer dann wirtschaftlich darstellbar, wenn die geologischen, klimatischen und topografischen Rahmenbedingungen eine effiziente Speicherung der Energie zulassen.
Die Dichte des Netzes an Glättemeldeanlagen (GMA) an Bundesautobahnen ist wesentlich höher als im nachgeordneten Netz. Eine Verdichtung des Messstellennetzes analog zu Bundesautobahnen ist jedoch aus finanziellen und organisatorischen Gründen nicht realisierbar. Ziel der Forschungsvorhaben ist daher die vereinfachte Erfassung von winterlichen Fahrbahn- und Witterungszuständen, um eine wesentliche Verdichtung des Messstellennetzes unter wirtschaftlich akzeptablen Bedingungen zu ermöglichen. Hierdurch soll den Winterdienstverantwortlichen eine netzweite Beurteilung des Streckenzustandes ermöglicht werden, um die Winterdiensteinsätze anforderungsgerechter und wirtschaftlicher durchführen zu können. Im Rahmen einer Lebenszykluskostenanalyse wurden Investitions- und Betriebskostendaten von über 200 GMA ausgewertet. Die Analyse ergab durchschnittliche Investitionskosten von 38.300 € je Messstelle. Diese Kosten werden hauptsächlich durch die Art der Stromversorgung (netzgebunden/autark) sowie den Umfang und die Art der Sensorik beeinflusst. Die bei Energieverbrauchsmessungen an bestehenden GMA erfassten Daten zeigen, dass GMA teils stark unterschiedliche Leistungsverbräuche besitzen, eine energieoptimierte Ausstattung jedoch eine wirtschaftlich akzeptable autarke Energieversorgung ermöglicht. Im Winter 2011/2012 wurden in drei Meistereien Einsatzentscheidungen untersucht. GMA sind hierbei die wichtigste Informationsquelle; sie werden in über 60 % aller Entscheidungen herangezogen. Luft- und Fahrbahnoberflächentemperatur sind die wichtigsten Parameter. Große Bedeutung für die Nutzer hat vielfach auch ein Kamerabild. Wesentlich für einen wirtschaftlichen Betrieb von GMA und einen gleichbleibenden Nutzen für die Anwender ist eine hohe Zuverlässigkeit in die angezeigten Messdaten. Daher sollte die Qualitätssicherung bei Installation und laufendem Betrieb größere Bedeutung gewinnen, indem durch die Straßenbauverwaltungen neben der regelmäßigen Wartung und Kalibrierung standardisierte Abnahme- und regelmäßige Kontrollprüfungen auf Grundlage der geltenden technischen Normen vorgesehen werden.
Zwischen der Situation des Fahrradverkehrs in Großbritannien (GB) und der in der Bundesrepublik Deutschland (D) bestehen große Unterschiede hinsichtlich der Bedeutung des Fahrrades im Verkehrsgeschehen sowie der verkehrlichen und infrastrukturellen Rahmenbedingungen. In beiden Ländern stehen jedoch in dem Bestreben nach einer Förderung des Fahrradverkehrs Fragen der Erhöhung der Verkehrssicherheit im Vordergrund. Aufgabe des Forschungsprojektes war es deshalb, das Unfallgeschehen sowie andere für den Radverkehr sicherheitsrelevante Aspekte in beiden Ländern zu analysieren und vergleichend gegenüberzustellen. Dazu wurden neben einer Auswertung der bereits in beiden Ländern vorliegenden Erkenntnisse in je drei ausgewählten Untersuchungsstädten Unfallanalysen, Verhaltensbeobachtungen und Befragungen von Radfahrern durchgeführt. Die Ergebnisse lassen zusammengefasst erkennen, dass Radfahren in GB sowohl hinsichtlich des Unfallrisikos als auch der Unfallschwere nicht sicherer ist als in D. Die Unfallcharakteristik in beiden Ländern unterscheidet sich jedoch in der Zusammensetzung der Unfallbeteiligten, der örtlichen Verteilung der Unfälle im Straßennetz und insbesondere in den typischen Unfallverläufen. Hier wirken sich die Unterschiede in der verkehrlichen Infrastruktur, zum Beispiel bezüglich der Knotenpunktformen und der Ausstattung mit Radverkehrsanlagen sehr deutlich aus. Generell wird deutlich, dass Radverkehrsanlagen bei unzureichender Qualität keine Garantie für eine geringe Unfallgefährdung darstellen. Dies gilt insbesondere für die in D üblichen straßenbegleitenden Radwege. Um die Sicherheit der Radfahrer zu erhöhen, kommt es deshalb weniger auf das "Wieviel?" als auf das "Wie?" der Radverkehrsanlagen an. Speziell in GB besteht noch erheblicher Nachholbedarf im Hinblick auf eine Förderung des Fahrradverkehrs. Auch wenn mit einer Zunahme des Radverkehrs in der Regel auch eine Zunahme der Radverkehrsunfälle verbunden ist, bedeutet dies nicht, dass es zu einem Anstieg der Zahl aller Verkehrsunfälle kommt. Zudem bekräftigt die Untersuchung den Eindruck, dass mit zunehmendem Radverkehr die Gefährdung des einzelnen Radfahrers abnimmt, da die Kraftfahrer dann offenbar eher mit Radfahrern rechnen.
Aus der Gegenüberstellung der in England und in Deutschland ermittelten Kenngrößen konnten Vermutungen beziehungsweise Tendenzen bezüglich der Verhaltensweisen abgeleitet werden. Die durch die ermittelten Daten fundierten Aussagen lassen sich wie folgt zusammenfassen: - Die deutschen Fahrer nutzen im Mittel kleinere Zeitlücken beziehungsweise Zeitdifferenzen zum Einfahren in den Hauptstrom als die englischen Fahrer, weshalb ein riskanteres Verhalten vermutet werden kann. - Auf deutschen Landstraßen scheint schneller gefahren zu werden als auf englischen Landstraßen. - Die deutschen Fahrer nähern sich im Nebenstrom dem Knoten mit höherer Geschwindigkeit als die englischen Fahrer, was ebenfalls auf eine größere Risikobereitschaft oder sogar größere Aggressivität schließen läßt. Bezüglich des Unfallgeschehens lässt sich daher vermuten, dass in Deutschland durch riskanteres Einfahren in die Hauptstraße die Unfallzahl, und durch höhere Geschwindigkeiten die Unfallschwere erhöht werden. Es lässt sich weiter vermuten, dass die englische Fahrweise, da sich die Fahrer langsamer der Einmündung nähern, defensiver ist, woraus sich günstige Auswirkungen auf das Unfallgeschehen ergeben. In dieser Studie wurden am Beispiel der Einmündung die Probleme solcher Messungen und Vergleiche aufgezeigt und versucht, die Risikoakzeptanz messtechnisch zu quantifizieren; anhand der Ergebnisse konnte dabei generell ein etwas riskanteres Verhalten der deutschen Fahrer festgestellt werden. Die Aussagen beziehen sich dabei natürlich zunächst nur auf die den Messungen zugrundeliegenden Einmündungen. Um allgemeingültige Aussagen zum Verhalten der Verkehrsteilnehmer zu erhalten, bedarf es weiterführender Untersuchungen, in die weitere typische Verkehrssituationen mit entsprechenden Aufgaben für die Verkehrsteilnehmer aufgenommen werden.