Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
- Buch (Monographie) (370)
- Konferenzveröffentlichung (142)
- Bericht (15)
- Arbeitspapier (7)
Volltext vorhanden
- ja (534) (entfernen)
Schlagworte
- Deutschland (534) (entfernen)
Institut
- Sonstige (534) (entfernen)
Still correlated with high mortality rates in traffic accidents traumatic aortic ruptures were frequently detected in unprotected car occupants in the early years. This biomechanical analysis investigates the different kinds of injury mechanisms leading to traumatic aortic injuries in todays traffic accidents and how the way of traffic participation affects the frequency of those injuries over the years. Based on GIDAS reported traffic accidents from 1973 to 2014 are analyzed. Results show that traumatic aortic injuries are mainly observed in high-speed accidents with high body deceleration and direct load force to the chest. Mostly chest compression is responsible for the load direction to the cardiac vessels. The main observed load vector is from caudal-ventral and from ventral solely, but also force impact from left and right side and in roll-over events with chest compression lead to traumatic aortic injuries. Classically, the injury appeares at the junction between the well-fixed aortic arch and the pars decendens following a kind of a scoop mechanism, a few cases with a hyperflexion mechanism are also described. In our analysis the deceleration effect alone never led to an aortic rupture. Comparing the past 40 years aortic injuries shift from unprotected car occupants to today's unprotected vulnerable road users like pedestrians, cyclists and motorcyclists. Still the accident characteristics are linked with chest compression force under high speed impact, no seatbelt and direct body impact.
To elucidate the risk of pedestrians, bicycle and motorbike users, data of two accident research units from 1999 to 2014 were analysed in regard to demographic data, collision details, preclinical and clinical data using SPSS. 14.295 injured vulnerable road users were included. 92 out of 3610 pedestrians ("P", 2.5%), 90 out of 8307 bicyclists ("B", 1.1%) and 115 out of 4094 motorcycle users ("M", 2.8%) were diagnosed with spinal fractures. Thoracic fractures were most frequent ahead of lumbar and cervical fractures. Car collisions were most frequent mechanism (68, 62 and 36%). MAIS was 3.8, 2.8 and 3.2 for P, B and A with ISS 32, 16 and 23. AIS-head was 2.2, 1.3 and 1.5). Vulnerable road users are at significant risk for spine fractures. These are often associated with severe additional injuries, e.g. the head and a very high overall trauma severity (polytrauma).
While cyclists and pedestrians are known to be at significant risk for severe injuries when exposed to road traffic accidents (RTAs) involving trucks, little is known about RTA injury risk for truck drivers. The objective of this study is to analyze the injury severity in truck drivers following RTAs. Between 1999 and 2008 the Hannover Medical School Accident Research Unit prospectively documented 43,000 RTAs involving 582 trucks. Injury severity including the abbreviated injury scale (AIS) and the maximum abbreviated injury scale (MAIS) were analyzed. Technical parameters (e.g. delta-v, direction of impact), the location of accident, and its dependency on the road type were also taken into consideration. The results show that the safety of truck drivers is assured by their vehicles, the consequence being that the risk of becoming injured is likely to be low. However, the legs especially are at high risk for severe injuries during RTAs. This probability increases in the instance of a collision with another truck. Nevertheless, in RTAs involving trucks and regular passenger vehicles, the other party is in higher risk of injury.
In this study, we compared the injury severity of occupants according to the seating position and the crashing direction in motor vehicle accidents. In the driver's point of view, it was separated the seating position as "Near-side" and "Far-side". The study subjects were targeted by people who visited 4 regional emergency centers following motor vehicle accidents. Real-world investigation was performed by direct and indirect methods after patient- consent. The information of the damaged vehicle was informed by Collision Deformation Classification (CDC) code and the information of the injury of patients was informed by using the Abbreviated Injury Score (AIS) and Injury Severity Score (ISS). When the column 3 in CDC code was P, damaged at the middle part of lateral side, the average point of AIS 3 was 1.91-±1.72 in near-side and 1.02-±1.31 in far-side (p<0.01). The average point of maximum AIS (MAIS) was 2.78-±1.39 in near-side and 2.02-±1.11 in far-side (p<0.01). The average point of ISS was 15.74-±14.71 in near-side and 8.11-±8.39 in far-side (p<0.01). Also, when the column 3 in CDC code was D, damaged at the whole part of lateral side, it was significant that the average point of AIS 3 and MAIS in near-side was bigger than in far-side (p=0.02).
In-depth accident investigation offers many advantages for the analysis and comprehension of crash mechanisms. IFSTTAR makes such investigations since 1992 without interruption. The corresponding database contains more than 1200 accident case studies. Currently, in-depth accident investigation is one of the best ways to determine the speed or cars involved in accidents. This paper first presents the methods used for accident investigation and for accident kinematic reconstruction. Then, in order to illustrate the interest and possible applications of such accident data, it shows some results from a recent study based on the IFSTTAR in-depth accident study programme (IDAS) and dealing with the link between travelling speed and accident risk.
For the avoidance of traffic accidents by means of advanced driver assistance systems the knowledge of failures and deficiencies a few seconds before the crash is of increasing importance. This information e.g. is collected in the German accident survey GIDAS by an interview derived from the ACAS methodology. However to display the whole range of accident causation factors additional information is needed on enduring factors of the system components "human", "infrastructure" and "machine". On the strategic level these accident moderating factors include long term influences such as medical preconditions or a general higher risk taking behavior as well as influences on the immediate conflict level such as an aggressive response to a perceived previous traffic conflict. This study was conducted to examine the feasibility of collecting such causation information in the scope of an in-depth accident investigation like GIDAS. Due to the comprehensive amount of information necessary to estimate the moderating factors the collection of the information is distributed to different methods. 5 cases of real world crashes have been investigated where information was collected on-scene and retrospective by interviews. The identified moderating factors of the accidents and the method for collecting the information are displayed.
Motorcycle crashes in Austria: Analysis of causes and contributing factors based on in-depth data
(2017)
From CEDATU, the in-depth accident database run by the Vehicle Safety Institute at Graz University of Technology, a representative sample of 101 crashes involving at least one motorcycle was selected. The analysis focused on causes for crashes as well as on contributing factors, but also included parameters of road, riders and vehicles. Own riding speed and "unexpectable action by another road user" were the most frequent causes for accidents. Inappropriate safety distance or delayed reaction were frequent, both as causation factors and as contributing factors. Infrastructure issues never cause an accident, but they are very frequent as contributing factors; road geometry and road guidance are by far most frequent among these. This paper also discusses accidents by type and other parameters (e.g. injury severity by body region, collision speed, age and others), and compares accident causes to previous studies as well as the police reported accident statistics.
Driver distraction
(2017)
This report for the Institute of Advanced Motorists (IAM) summarises recent research and knowledge from scientific studies about distracted driving. The report defines what it means to be "distracted" when driving, discusses the impact of distraction on driver behaviour and safety, and what can be done to reduce distracted driving. The focus of distraction discussed here relates to how drivers engage with technology when driving. The report begins with a background to driver distraction, followed by discussion about what is actually meant by driver distraction. It is then considered why humans cannot successfully do two things at the same time, particularly within the context of driving. The subsequent section summarises the scientific research findings to date with regard to driver distraction and technology, and how this affects different types of road user. Recommendations for how driver distraction can be mitigated in the real world and a summary conclude the report. Responses to common questions raised by drivers are presented in Appendix A.
From an automotive safety occupant protection standpoint, effective occupant restraint requires a system capable of providing non-injurious occupant ride down of anticipated crash forces. This is not only the case for frontal collisions, where occupant restraint is provided primarily by seatbelts and airbags, but is also critical for other crash modes such as side impacts, rear impacts, rollovers, as well as multiple impact events. In the rear impact crash mode, occupant restraint is provided primarily by the seatbacks and to some extent the seatbelts. Foundationally, therefore, what becomes fundamental to the seatback's role in rear occupant protection is its ability to contain the occupant within the seat, preventing occupant ramping, as well as preventing the seat's, and/or its occupant's, dangerous intrusion into the rear occupant's survival space where contact with rear compartment components and/ or rear seated occupants can present a significant injury risk. An analysis is presented of a series of rear impact sled testing conducted by the authors that evaluates the timing, position and extent of the front seatback's reward displacement toward and into the rear occupant compartment as well as consideration of the front seat occupant' ramping potential and its injury potential relative to the rear compartment. Additionally, three other series of testing are presented which assess various seat designs occupant retention capabilities. Lastly, a matched-pair comparison test series is presented which evaluates occupant motion in rear impact with and without use of a typical vehicle body mounted 3-point seatbelt. Discussion of restraint system performance observed in all the testing is included along with ATD biofidelity and thigh-gap considerations. The data collected and presented includes accelerometer instrumentation and high speed video analysis.
This study investigates the protection offered by passive head-restraints with different stiffness and energy dissipation properties. For this purpose, computational multi-body models of a generic car seat and a biofidelic 50thpercentile male human for rear impact are used to study different seat designs and passive head-restraints. The validated seat-occupant model is also used in the design of two different car-seat models which are shown to effectively mitigate whiplash by utilising a crash-energy distribution technique. Five different passive head-restraints with varying stiffness (low-medium-high) and energy dissipation percentages (low-high) are successively attached to four different car-seat models. The simulation results indicate that the protection offered by head restraints is strongly dependent on the seat design. It has also been shown that the stiffness of the passive head-restraint has much more influence on whiplash-risk in comparison to its energy dissipation capacity.
The incidence of side impacts was investigated from GIDAS data. Both vehicle-fixed object and vehicle-vehicle collisions were analysed as these are enclosed within the consumer testing program. Vehicle-fixed object collisions were stratified according to ESC availability. Results indicated that vehicles equipped with ESC rarely have pure-lateral impacts. An increase in oblique collisions was seen for the vehicles with ESC whereby most vehicle were driving in left curves. The analysis of vehicle-vehicle collisions developed injury risk curves were developed at the AIS3+ injury severity for the vehicle-vehicle side impacts. Results suggested that greatest injury risk occurred when a Pre Euro NCAP vehicle was struck by a Post Euro-NCAP vehicle. The remaining curves did not show different behaviour, indicating that stiffness increased have been equally combated. This was attributable to the few Post Euro-NCAP vehicles that had a deployed curtain airbag available in the sample. The integration of Euro NCAP testing has shown to improve vehicle crashworthiness for pole collisions, as those vehicles with ESC rarely incur lateral impacts.
Recently, EuroNCAP updated the upper legform test protocols. The main objective of this study is to establish the upper legform test in KIDAS (Korean In-depth Accident Study) taking into account domestic pedestrian accident data as well as anthropometric data to protect elderly pedestrians whose average height and weight is much smaller and lighter than other age groups, especially compared to Europeans. Therefore 230 cases of pedestrian accidents from KIDAS were investigated to explore the injury severity of body regions as well as age related injury patterns. Injuries of all body regions were examined, with a special focus on injuries of abdomen and pelvic area. On the other hand, in order to explore Korea's pedestrian accident environment, national police data and KIDAS (Korean In-depth Accident Study) data were compared. The results should be taken into account in future analyses and possible improvements, such as regulations and KNCAP test protocols, of the pedestrian safety policy in Korea.
At IAM RoadSmart we share the excitement about autonomous cars " who wouldn't! However over half of the drivers we polled supported concentrating on making drivers safer " among IAM RoadSmart members it was 70%. Driverless cars are still years away but delivering safer drivers can help reduce death and injury from tomorrow. Governments, academics and car makers need to work hard to convince sceptical British and American drivers that autonomous cars can deliver the benefits promised such as a 90% plus reduction in road deaths.
The Decision Support System (DSS) is one of the key objectives of the European co-funded research project SafetyCube in order to better support evidence-based policy making. Results will be assembled in the form of a DSS that will present for each suggested road safety measure: details of risk factor tackled, measure, best estimate of casualty reduction effectiveness, cost-benefit evaluation and analytic background. The development of the DSS presents a great potential to further support decision making at local, regional, national and international level, aiming to fill in the current gap of comparable measures effectiveness evaluation. In order to provide policy-makers and industry with comprehensive and well-structured information about measures, it is essential that a systems approach is used to ensure the links between risk factors and all relevant safety measures are made fully visible. The DSS is intended to become a major source of information for industry, policy-makers and the wider road safety community.
Die Abgas-Gesetzgebung für Kraftfahrzeuge wurde in den letzten 25 Jahren stetig verschärft. Das Durchschnittsalter der PKW steigt kontinuierlich. Im Jahr 2000 lag dies bei 6,9 Jahren, im Jahr 2011 bei 8,3 Jahren und 2016 bei 9,2 Jahren. Dieser Trend hat auch zu einem Bestandsanstieg bei Fahrzeugen älter 30 Jahren geführt. Es stellt sich daher die Frage, welche Größenordnung diese Fahrzeuge > 30 Jahren bei der Betrachtung der Gesamtemissionen des Straßenverkehrs in der Bundesrepublik in Zukunft einnehmen werden. Aufbauend auf zwei möglichen Szenarien zum zukünftigen Fahrzeugbestand älter 30 Jahren sowie entsprechend abgeleiteten Fahrleistungen wurde der Emissionsbeitrag dieser Fahrzeuge bis zum Jahr 2030 hochgerechnet und modelliert. Zusätzlich wurden Werte für ein größeres Zusammenkommen solcher Fahrzeuge abgeleitet (Oldtimertreffen). Im Rahmen des Vorhabens wurden die limitierten Abgaskomponenten NOX (Stickoxide), HC (Kohlenwasserstoffe), CO (Kohlenmonoxid) und PM (Partikelmasse) betrachtet. Als Ausgangspunkt (2016) wurden 712.000 relevante Fahrzeuge mit einer jährlichen Fahrleistung von 1370 km für die Szenarien angesetzt. Im Ergebnis lässt sich festhalten, dass der Emissionsbeitrag der Fahrzeuge älter 30 Jahren in der Gesamtheit, auch für die späteren Bezugsjahre mit entsprechend höherem Fahrzeugbestand, in Summe pro Abgaskomponente jeweils nur einen einstelligen prozentualen Anteil ausmacht. Bei isolierter Betrachtung der Außerorts-Anteile steigen die Werte jedoch durchaus auch an. Am Tag des modellierten Treffens tragen die Oldtimer zwar maßgeblich zu den Emissionen bei, bezogen auf die durchschnittlichen jährlichen Tageswerte der Emissionskomponenten ergeben sich jedoch auch hier lediglich Veränderungen im unteren einstelligen Prozentbereich.
Die Produktion von Heißasphalt im Asphaltmischwerk hat einen großen Anteil an den in Ökobilanzen erfassten Umweltindikatoren, z.B. der CO2-Emissionen. Ein Großteil des bei der Asphaltproduktion erforderlichen Energieverbrauchs wird zur Trocknung und Erwärmung der Gesteinskörnungen aufgebracht. Vermehrt wird daher international bitumenhaltiges Mischgut bei Umgebungstemperaturen hergestellt und eingebaut. Als Bindemittel kommen dabei Bitumenemulsion oder Schaumbitumen zur Anwendung. Das Baustoffverhalten des Kaltmischgutes unterscheidet sich in verschiedenen Aspekten vom mechanischen Verhalten von Heißasphalt. Dies betrifft alle Phasen der fertiggestellten Schicht " Mischgutherstellung, Lagerung und Transport, Einbau, Verdichtung sowie Kurz- und Langzeitverhalten. Um das bautechnische Potenzial der bitumengebundenen Kaltbauweisen für die Anwendung in Deutschland abzuschätzen wurden internationale Anwendungen und Erfahrungen mit der Bauweise zusammengestellt und vergleichend bewertet. Dabei können anhand der eingesetzten Bindemittelgehalte vier bitumenhaltige, kalt verarbeitete Mischgutarten unterschieden werden: Kaltasphalt, Grave Emulsion, Bitumen-Stabilisiertes Mischgut und Bitumen-Zement-Stabilisiertes Mischgut. Insbesondere bei den letzten drei Mischgutsorten unterscheidet sich das mechanische Baustoffverhalten stark von jenem von Heißasphalt. Daher sind vom bisherigen Standard abweichende Dimensionierungs- und Bauverfahren erforderlich. Um die Kaltbauweisen in Deutschland zu erproben, sind weitere Forschungsaktivitäten hinsichtlich des mechanischen Verhaltens der Kaltbaustoffe erforderlich. Die praktische Umsetzung international erprobter Bauweisen kann parallel in Untersuchungsstrecken erfolgen, welche durch Lebenszyklus-Studien begleitet werden sollten, um ökologische und ökonomische Vorteile der Bauweisen belegen zu können.
Die Bundesregierung hat zum 01.01.2012 einen deutschlandweiten Feldversuch mit Lang-Lkw gestartet. Die dafür erforderliche verkehrsrechtliche Grundlage wurde durch die LkwÜberlStVAusnV gegeben. Diese Verordnung schreibt u.a. die wissenschaftliche Begleitung des Feldversuches durch die BASt vor. Gründe für den Feldversuch sind u. a. vermutete Auswirkungen durch die Lang-Lkw auf die Verkehrssicherheit, den Verkehrsablauf, die Verkehrsqualität und auf die geometrische Gestaltung der Verkehrsanlagen. In der vorliegenden Untersuchung sollten entwurfstechnische Lösungsansätze für das Parken von Lang-Lkw auf Rastanlagen entwickelt und bewertet werden. Die Untersuchung beschränkt sich auf Rastanlagen im Zuge von Bundesfernstraßen. In den Untersuchungen wurde zwischen den Lang-Lkw bis L = 17,80 m (Typ 1) und den Lang-Lkw bis L = 25,25 m differenziert. Die differenzierte Bewertung beruht auf den Erkenntnissen, dass Typ 1 in Lkw-Parkstände passt. Die größeren Lang-Lkw mit bis zu L = 25,25 m passen nicht in die L = 21,96 m langen Schrägparkstände. Stellvertretend für die längeren Lang-Lkw wurde Typ 2 näher untersucht. Seine Schleppkurve ist vergleichsweise breit und sichert die Befahrbarkeit mit den übrigen Lang-Lkw auf einer Verkehrsanlage. Bei einer schlechten Befahrbarkeit der Verkehrsanlage mit Typ 2 wurde eine differenzierte Betrachtung mit den übrigen Lang-Lkw durchgeführt. Für die Untersuchung wurden verschiedene Fahrversuche durchgeführt, mit denen aber nicht alle Inhalte abgedeckt werden konnten. Aus diesem Grund wurden ergänzend Schleppkurven mit einer Simulationssoftware berechnet. Untersucht wurde auf Rastanlagen die Befahrbarkeit der Fahrgassen, Verzweigungen, Parkstände für Großraum- und Schwertransporte (GST), Schrägparken mit Ummarkierungen, Längsparkstände, telematisches Parken, Umbau von Trenninseln und temporäre Parkstandfreigaben. Die Ergebnisse der Untersuchungen zeigten, dass es kurzfristig möglich ist für Lang-Lkw Parkstände zur Verfügung zu stellen. Auf Längsparkständen können Lang-Lkw ohne bauliche Anpassung parken, wenn ausreichende Lücken vorhanden sind. Auch die temporäre abschnittsweise Freigabe von GST-Parkstreifen ist eine schnell umsetzbare Lösung. Die übrigen Lösungsansätze sind je nach vorhandenen Gegebenheiten auf den Rastanlagen mit mehr oder weniger Aufwand verbunden. Aus baulicher Sicht können Parkmöglichkeiten für Lang-Lkw auch auf bestehenden Rastanlagen umgesetzt werden. Aus rechtlicher Sicht sollte eine eindeutige Verkehrsregelung für die neue Fahrzeugart Lang-Lkw (zwischen Lkw und GST) festgelegt werden. Ein entsprechendes Zusatzzeichen ist dafür auch heute schon möglich. Die Untersuchung hat gezeigt, dass es verschiedene Ansätze zur Verbesserung der Parksituation von Lang-Lkw auf Rastanlagen gibt. Das als Problematik angeführte Parken mit Lang-Lkw ist jedoch als beherrschbar einzustufen, sofern die Anteile der Lang-Lkw am gesamten Straßengüterfernverkehr und der Parkbedarf der Lang-Lkw aufgrund der im Feldversuch beobachteten recht kurzen Fahrtweiten gering bleiben. Der künftige zusätzliche Parkstandbedarf für Lang-Lkw kann nur unter Realisierung solcher Maßnahmen (einzeln oder abgestuft als Maßnahmenkonzept) abgedeckt werden.
Millions of kilometers are driven and recorded by car manufacturers and researchers every year to gather information about realistic traffic situations. The focus of these studies is often the recording of critical situations to create test scenarios for the development of new systems before introducing them into the market. This paper shows a novel Analysis and Investigation Method for All Traffic Scenarios (AIMATS) based on real traffic scenes. It also shows how to get detailed information about speeds, trajectories and behavior of all participants without driving thousands of kilometers at the example of conflict situations with animals. Basis of the AIMATS is the identification of the most relevant locations as "Points of Interest" (POI), the recording of the critical situations and their "base lines" at these POI. This paper presents a new method to identify critical scenarios involving both vehicles and animals as well as preliminary results of a study done in Saxony using this new method.
Although road infrastructure is developed extensively Brazil is still one of the countries with the most dangerous roads in the world. In order to stop the increasing trend of traffic fatalities of the last few years and to improve traffic safety on Brazilian roads a pilot study on behalf of SAE Brazil started in March 2016 with the goal to lay the foundations for a long-term research activity. Piloting for an in-depth accident investigation the city of Campinas, roughly 100 km north of São Paulo was chosen. The pilot project was carried out with the local partner, the Empresa Municipal de Desenvolvimento de Campinas (EMDEC). The paper reports on the initial training of evidence based accident data collection on-spot, the implementation of the new digital database, the data collection and the first results. An outlook on the planned long-term accident investigations is given.
This paper gives an overview of the in-depth crash investigation activity conducted by the Centre for Automotive Safety Research (CASR) at the University of Adelaide, in South Australia. Recent changes in method include: an expansion in on-call hours for the crash investigation team, providing the option of a phone interview for crash participants to discuss the crash, and downloading objective crash data from vehicle airbag control modules. These changes have resulted in: increased representativeness of crashes by hour of day; a decrease in the over-representation of fatal crashes in our sample; an increase in the proportion of crashes that involved a pedestrian, bicycle or scooter (moped); an increase in the proportion of crash participants consenting to an interview; and an increase in the objective data available, through airbag control module downloads. Our in-depth crash investigations enabled research into road departures that found barriers were a more feasible solution than clear zones for eliminating serious and fatal injury resulting from run off road crashes.