Sonstige
Refine
Year of publication
Document Type
- Conference Proceeding (42)
- Book (15)
- Article (1)
Keywords
- Car (58) (remove)
Institute
- Sonstige (58) (remove)
Detailed investigations and reconstructions of real accidents involving vulnerable road users
(2005)
The aim of this research is to improve knowledge about vulnerable road users accidents and more specifically pedestrians or cyclists. This work has been based on a complete analysis of real accidents. From accidents chosen from an in-depth multidisciplinary investigation (psychology, technical, medical), we have tried to identify the configuration of the impact: car speed, pedestrian or cyclist orientations. Then, we have made a numerical modelling of the same configuration with a multibody software. In particular, we have reproduced the anthropometry of the victim and the front shape of the car. A first simulation has been performed on this starting configuration. Next, effects of some parameters such as car velocity or victim position at impact have been numerically studied in order to find the best correlations with all indications produced by the in-depth analysis. Finally, the retained configuration was close to the presumed real accident conditions because it reproduces in particular the same impact points on the car, the same injuries, and is according to the driver statement. This double approach associating an in-depth accident analysis and a numerical simulation has been applied on pedestrian-to-car and bicyclist-tocar accidents. It has allowed us to better understand the real kinematics of such impacts. Even if this method is based on a case to case study, it underlines which parameters are relevant on a vulnerable road user accident investigation and reconstruction.
The incidence of side impacts was investigated from GIDAS data. Both vehicle-fixed object and vehicle-vehicle collisions were analysed as these are enclosed within the consumer testing program. Vehicle-fixed object collisions were stratified according to ESC availability. Results indicated that vehicles equipped with ESC rarely have pure-lateral impacts. An increase in oblique collisions was seen for the vehicles with ESC whereby most vehicle were driving in left curves. The analysis of vehicle-vehicle collisions developed injury risk curves were developed at the AIS3+ injury severity for the vehicle-vehicle side impacts. Results suggested that greatest injury risk occurred when a Pre Euro NCAP vehicle was struck by a Post Euro-NCAP vehicle. The remaining curves did not show different behaviour, indicating that stiffness increased have been equally combated. This was attributable to the few Post Euro-NCAP vehicles that had a deployed curtain airbag available in the sample. The integration of Euro NCAP testing has shown to improve vehicle crashworthiness for pole collisions, as those vehicles with ESC rarely incur lateral impacts.
The price of a new car increased almost every year for a long period. In recent years however, the budget available to most people for purchasing a car either did not grow or became even smaller. Therefore it was in the interest of some OEMs to offer economical car models in the so-called "8,000- Euro class". Here an important question arose regarding the safety of these vehicles. There is no question that the very high safety level of cars reached in Europe during the last decades should not be sacrificed as a consequence of smaller budgets. Customers with sense of responsibility have the right to be properly informed about the balance between safety and price so that they can make a deliberate decision when buying either a new or a used car. Against this background, the German magazine "AutoBILD" commissioned DEKRA to conduct fullscale frontal crash tests with a view to publishing the results. These tests have been carried out in accordance with the corresponding Euro NCAP crash test requirements and performance criteria. The tested vehicles were two new Logans produced by the manufacturer Dacia, two used cars of the type VW Golf IV (registration date 2000) and one new VW Fox. This paper describes the safety features of the vehicles and the results of the five crash tests to demonstrate state-of-the-art safety levels and what levels may be expected from vehicles in the "8,000- Euro class". Looking at real-world crashes it is of interest to think about future trends in a more detailed manner. Therefore it will be more and more necessary to supplement the federal statistics with more detailed in-depth information about the consequences of accidents and the safety performance of crashed vehicles.
Since a number of human models have been developed it appears sensible to use these models also in the accident analysis. Especially the understanding of injury mechanisms and probably even injury risk curves can be significantly improved when interesting accidents are reconstructed using human body models. However, an important limitation for utilising human models for accident reconstruction is the effort needed to develop detailed FE models of the accident partners or to prepare the human model reconstruction by running physical accident reconstructions. The proposed approach for using human models for accident reconstruction is to use simplified and parametric car models. These models can be adapted to the crash opponents in a fast and cost effective way. Although, accuracy is less compared to detailed FE models, the relevant change in velocity can be simulated well, indicating that the computation of a detailed crash pulse is not needed. Two frontal impact test accidents that were reconstructed experimentally and using the parametric car models are indicating sufficient correlation of the adapted parametric car models with the full scale crash reconstructions. However, further developments of the parametric models to be capable for the use in lateral impacts and rear impacts are needed. For the PC Crash simulation runs the output sampling rate is too large to allow sufficient analysis. In addition the performance appears to be too general.
The fact that ADAC Air Rescue handles approximately 4,000 road accident missions every year gave rise to set up an accident research programme for which ADAC Air Rescue provides its data. This data is of initial informational quality and will be supplemented by data from the police, experts, fire brigades as well as hospitals and forensic institutes. Although the number of cases is still rather low, certain tendencies can be identified. The causes for most accidents occur when joining or intersecting traffic, followed by speeding in road bends and tailgating. Many accidents involve HGV rear end collisions, often causing serious injuries, considerable damage and technical problems for the rescue operations. With regard to the various impact types, it has become obvious that most of the extremely serious injuries are inflicted during a passenger car side impact. In addition, access to and removal of trapped passengers is becoming more and more complicated, partly due to the increasing use of high-strength materials, and rescue operations tend to be more time consuming.
This study aimed at comparing head Wrap Around Distance (WAD) of Vulnerable Road User (VRU) obtained from the German in-depth Accident Database (GIDAS), the China in-depth Accident Database (CIDAS) and the Japanese in-depth Accident Database (ITARDA micro). Cumulative distribution of WAD of pedestrian and cyclist were obtained for each database (AIS2+) showing that WAD of cyclists were larger than the ones of pedestrians. Comparing three regions, the 50%tile WAD of GIDAS was larger than that of both Asian accident databases. Using linear regression that might predict WAD of pedestrians and cyclists from Impact speed and VRU height, WADs were calculated to be 206cm/219cm (Pedestrian/Cyclist) for GIDAS, 170cm/192cm for CIDAS and 211cm/235cm for ITARDA. In addition, this study may be helpful for reconsideration of WAD measurement alignment between accident reconstruction and test procedures.
One goal of the assessment of the crashworthiness of passenger cars is to characterize the potential of injury outcome to occupants of cars involved in an accident. This can be achieved by the help of an index that puts the number of injured occupants of passenger cars in relation to the number of cars involved in an accident. As a consequence, this index decreases with a lower potential of injury and rises with a higher number of injuries while assuming a fixed number of accidents. Another index is introduced that uses an economical weighting of each injury level. The consequential injury costs are calculated using the average economical costs for lightly, severely and fatally injured persons. The calculation of the safety indices is based on an anonymized sample of accident data provided by the Federal Statistical Office. An index of Mercedes passenger car drivers depending on the year of registration between 1991 and 2006 is compared to the index of drivers of cars of other makes within the same range of registration years.
Die hier vorgestellten Forschungsprojekte hatten die Aufgabenstellung, - sinnvolle Obergrenzen für den biogenen Blend-Anteil im Kraftstoff aus ökonomisch-technischer Sicht aufzuzeigen sowie - technische Anforderungen an Pkw aus Altbestand und Neufahrzeugen für den Betrieb mit solchen Kraftstoff-Blends zu untersuchen, insbesondere in Hinblick auf Aspekte der Dauerhaltbarkeit. Auf Basis einer umfangreichen Literaturrecherche wurden zunächst sinnvolle Beimischungen ermittelt, die in 5 Fahrzeugen (3 Otto-Pkw, 2 Diesel-Pkw) auf einem Abgasrollenprüfstand getestet wurden. Anschließend wurden zwei Fahrzeuge einer Dauerlaufuntersuchung (ca. 80.000 km) unterzogen. Hierbei wurden u. a. Emissionsverhalten, Kraftstoffverbrauch und Motorleistung bewertet und Motorölproben entnommen. Am Ende der Dauerlaufuntersuchungen wurden bei beiden Fahrzeugen Motor und Kraftstoffsystem sorgfältig inspiziert. Aus fahrzeugtechnischer Sicht begrenzen bei Biodiesel vor allem die Ölverdünnung sowie der Anstieg der NOx-Emissionen den maximal möglichen Beimischungsanteil. Bei Bio-Alkohol sind insbesondere die Materialverträglichkeit und der Kraftstoffverbrauch limitierende Faktoren für erhöhte Beimischungen. Obwohl die betrachteten Euro-5-Fahrzeuge nicht für den Betrieb mit erhöhten Beimengungen an Biokraftstoffen ausgelegt waren, wurden die maßgeblichen Grenzwerte für die limitierten Emissionen im Verlauf der Untersuchungen nicht überschritten. Mit Ausnahme von NOx bei den Dieselfahrzeugen wurden darüber hinaus sogar die Euro-6-Grenzwerte unterschritten.
The paper presents a methodology for the benefit estimation of several secondary safety systems for pedestrians, using the exceptional data depth of GIDAS. A total of 667 frontal pedestrian accidents up to 40kph and more than 500 AIS2+ injuries have been considered. In addition to the severity, affected body region, exact impact point on the vehicle, and the causing part of every injury, the related Euro NCAP test zone was determined. One results of the study is a detailed impact distribution for AIS2+ injuries across the vehicle front. It can be stated, how often a test zone or vehicle part is hit by pedestrians in frontal accidents and which role the ground impact plays. Basing on that, different secondary safety measures can be evaluated by an injury shift method concerning their real world effectiveness. As an example, measures concerning the Euro NCAP pedestrian rating tests have been evaluated. It was analysed which Euro NCAP test zones are the most effective ones. In addition, real test results have been evaluated. Using the presented methodology, other secondary safety like the active bonnet (pop-up bonnet) or a pedestrian airbag measures can be evaluated.
For the estimation of the benefit and effect of innovative Driver Assistance Systems (DAS) on the collision positions and by association on the accident severity, together with the economic benefit, it becomes necessary to simulate and evaluate a variety of virtual accidents with different start values (e.g. initial speed). Taken into account the effort necessary for a manual reconstruction, only an automated crash computation can be considered for this task. This paper explains the development of an automated crash computation based on GIDAS. The focus will be on the design of the virtual vehicle models, the method of the crash computation as well as exemplary applications of the automated crash computation. For the first time an automated crash computation of passenger car accidents has been realized. Using the automated crash computation different tasks within the field of vehicle safety can be elaborated. This includes, for example, the calculation of specific accident parameters (such as EES or delta-V) for various accident constellations and the estimation of the economic benefit of DAS using IRFs (Injury Risk Functions).
Die vorliegende Arbeit beschäftigt sich mit den Auswirkungen alternativer Antriebskonzepte auf die Fahrdynamik von Pkw. Es werden einleitend die konventionellen und alternativen Antriebskonzepte sowie Unterschiede in Hinblick auf die Fahrdynamik herausgearbeitet. Die Ergebnisse einer Recherche zur Fahrwerksentwicklung von Hybrid- und Elektrofahrzeugen zeigen keine klaren Trends zu neuartigen oder geänderten Fahrwerkskonzepten, sodass auf eine getrennte Betrachtung von Fahrwerken für Fahrzeuge mit konventionellen und alternativen Antrieben verzichtet werden kann. Die erarbeiteten Unterschiede zwischen konventionellen und alternativen Antrieben zeigen, dass die Möglichkeit der Rekuperation von Hybrid- und E-Fahrzeugen insbesondere bei kombinierten Längs- und Querkräften zu deutlichen Auswirkungen auf die Fahrdynamik führen kann. Im nächsten Schritt werden daher Fahrmanöver zusammengestellt und in Bezug auf die Relevanz für die Rekuperation analysiert. Dabei erweist sich das nach DIN ISO 7975 genormte Fahrmanöver "Bremsen im Kreis" als zielführend, die Auswirkungen der Rekuperation auf die Fahrdynamik zu analysieren. Außerdem wird das Fahrzeugverhalten bei einer Geradeausbremsung und folgender Lenkanregung sowie bei einer Bremsung auf μ-Split untersucht, da auch hier Wechselwirkungen von Antrieb und Fahrwerk auftreten. Zur Beurteilung der Ergebnisse wird neben der Fahrstabilität auch die Wahrnehmbarkeit eines geänderten Fahrverhaltens betrachtet. Anhand einer Literaturrecherche wurde für die Giergeschwindigkeit ein Schwellwert von 3-°/s für die Wahrnehmbarkeit gefunden. Die Ergebnisse einer Simulationsstudie mit zwei Fahrzeugkonzepten (Front-/Heckantrieb) in den drei genannten Fahrmanövern zeigen, dass die Rekuperation in weiten Bereichen der Längsverzögerungen sinnvoll eingesetzt werden kann. Bei der Bremsung in der Kurve führt die Rekuperation an der Vorderachse zu einer deutlichen Reduzierung störender Fahrzeugreaktionen und kann auch bei höheren Querbeschleunigungen verwendet werden. Bei der Rekuperation an der Hinterachse kann es insbesondere auf Niedrigreibwerten bei Bremsungen in der Kurve zu kritischen Fahrzuständen kommen. Durch die Begrenzung des Rekuperationsmomentes bei großen Schlupfwerten kann die Stabilität des Fahrzeugs jedoch sichergestellt werden. Auch die Ergebnisse der Simulationen der anderen Fahrmanöver zeigen, dass bei geringen Schlupfwerten keine wahrnehmbaren fahrdynamischen Unterschiede festzustellen sind.
Analysis of pedestrian leg contacts and distribution of contact points across the vehicle front
(2015)
Determining the risk to pedestrians that are impacted by areas of the front bumper not currently regulated in type-approval testing requires an understanding of the target population and the injury risk posed by the edges of the bumper. National statistics show that approximately 10% of all accident casualties are pedestrians, with 20% to 30% of these pedestrian casualties being killed or seriously injured. However, the contact position across the front of the bumper is not recorded in national statistics and so in-depth accident databases (OTS, UK and GIDAS, Germany) were used to examine injury risk in greater detail. The results showed that some injury types and severities of injuries appear to peak around the bumper edges. Although there are sometimes inconsistencies in the data, generally there is no evidence to suggest that the edges of the bumper are less likely to be contacted or cause injury.
There is a need for detecting characteristics of pedestrian movement before car-pedestrian collisions to trigger a fully reversible pedestrian protection system. For this purpose, a pedestrian sensor system has been developed. In order to evaluate the effectiveness of the sensor system, the in-depth knowledge of car-pedestrian impact scenarios is needed. This study aims at the evaluation of the sensor system. The accident data are selected from the STRADA database. The accident scenarios available in this database were evaluated and the knowledge of the most common scenarios was developed in terms of the pedestrian trajectory, the pedestrian speed, the car trajectory, the car velocity, etc. A mathematical model was then established to evaluate the sensor system with different detective angles. It was found that in order to detect all the pedestrians in the most common scenarios on time the sensor detective angle must be kept larger than 60 degrees.
Car occupants have a high level of mortality in road accidents, since passenger cars are the prevalent mode of transport. In 2013, car occupant fatalities accounted for 45% of all road accident fatalities in the EU. The objective of this research is the analysis of basic road safety parameters related to car occupants in the European countries over a period of 10 years (2004-2013), through the exploitation of the EU CARE database with disaggregate data on road accidents. Data from the EU Injury Database for the period 2005 - 2008 are used to identify injury patterns, and additional insight into accident causation for car occupants is offered through the use of in-depth accident data from the EC SafetyNet project Accident Causation System (SNACS). The results of the analysis allow for a better understanding of the car occupants' safety situation in Europe, thus providing useful support to decision makers working for the improvement of road safety level in Europe.
Mobilität spielt in der Bundesrepublik Deutschland eine wichtige Rolle. Dabei ist der motorisierte Individualverkehr und somit der Pkw-Verkehr die entscheidende Größe. Der Verkehr soll umweltgerecht, sozialverträglich aber auch gleichzeitig wirtschaftlich effizient sein. Entscheidend für die Schadstoffbelastung der Umwelt durch den Straßenverkehr sind die Abgasemissionen der im Verkehr befindlichen Fahrzeuge. Daher wurde mit der Richtlinie 98/69/EG und der damit verbundenen Einführung der Abgasstufe Euro 3 erstmalig die Prüfung der Konformität von in Betrieb befindlichen Personenkraftwagen und leichten Nutzfahrzeugen (Feldüberwachung) eingeführt. Dabei sollen bereits im Verkehr befindliche Fahrzeuge nach einer statistischen Auswahl unter Typprüfbedingungen (Typ I Test) erneut untersucht werden. So soll gewährleistet werden, dass die abgasrelevanten Systeme und Bauteile eines Fahrzeuges auch noch nach mehreren tausend Kilometern funktionieren. Deshalb werden die Fahrzeuge bei der Feldüberwachung auf ihre limitierten Schadstoffkomponenten ein weiteres Mal überprüft. Aufgrund der immer größeren Bedeutung der CO2-Emissionen wurden in diesem Forschungsvorhaben sowohl die CO2-Emissionen als auch der Kraftstoffverbrauch mit erfasst. Für den Erfolg eines solchen Projektes ist die Fahrzeugauswahl von entscheidender Bedeutung. Denn nur so ist es möglich auch ein repräsentatives Ergebnis zu erhalten. Deshalb wurden neben den gesetzlich vorgeschriebenen Auswahlkriterien auch statistische und technische Kriterien berücksichtigt. Dabei erfolgte die Auswahl der Fahrzeughalter nach dem Zufallsprinzip. Alle Prüffahrzeuge wurden im Abgaslabor, entsprechend ihrer Abgasnorm, auf ihre Schadstoffkomponenten überprüft. Gemäß der Gesetzgebung gelten bei einer Feldüberwachung die gleichen Prüfbedingungen wie bei der jeweiligen Typgenehmigung. In diesem Forschungsvorhaben wurden insgesamt 17 Fahrzeugtypen untersucht. Wobei 6 Typen mit Fremdzündungsmotor und 11 Typen mit Selbstzündungsmotor ausgestattet waren. Beide Gruppen sollten jeweils Fahrzeuge der Grenzwertstufen Euro 4 und Euro 5 beinhalten. Bei den Fahrzeugtypen mit Fremdzündungsmotor war ein Typ mit der Abgasnorm Euro 5, alle anderen erfüllten die Abgasnorm Euro 4. Bei den Fahrzeugtypen mit Selbstzündungsmotor erfüllten 4 Typen die Abgasstufe Euro 5 und 7 Typen entsprachen der Abgasstufe Euro 4. Unter den Fahrzeugtypen mit Kompressionszündung und der Abgasnorm Euro 4 befanden sich 4 Typen der Klasse M1 und 3 Typen der Klasse N1 der Gruppe III. Ziel des Forschungsvorhabens ist es, die Abgasemissionen von in Betrieb befindlichen Pkw und leichten Nutzfahrzeugen zu untersuchen, um so Rückschlüsse auf die Dauerhaltbarkeit von Motorkomponenten und Systemen zur Abgasnachbehandlung ziehen zu können. Insgesamt konnten bei dieser Feldüberwachung, gemäß dem statistischen Verfahren, alle 17 geprüften Fahrzeugtypen mit "positiv" bewertet werden. Mit Ausnahme eines Fahrzeugtyps, wurde bei allen untersuchten Fahrzeugtypen, die Stichprobe mit der Mindeststichprobengröße abgeschlossen. Das bedeutet, dass alle 3 Fahrzeuge eines Typs im Anlieferungszustand die jeweiligen Grenzwerte für Schadstoffemissionen gemäß den Kriterien des statistischen Verfahrens einhielten bzw. unterschritten. Nur bei einem Fahrzeugtyp war die Erhöhung der Stichprobe auf 8 Fahrzeuge erforderlich. Weiterhin wurden bei allen Fahrzeugtypen die CO2-Emissionen und der Kraftstoffverbrauch (Typ I Test) bestimmt, um anschließend die gemessenen CO2-Emissionen mit denen der Hersteller vergleichen zu können. Von den 17 untersuchten Fahrzeugtypen hielten elf Fahrzeugtypen die jeweiligen Herstellerangaben ein oder unterschritten diese. Bei sechs Fahrzeugtypen lagen die CO2-Emissionen um mehr als die bei der Typprüfung zulässigen 4% über der Herstellerangabe.
The paper aims to study the injury risk and kinematics of pedestrians involved in different passenger vehicle collisions. Furthermore, the difference of pedestrian kinematics in the accidents involved minivan and sedan was analyzed. The 18 sample cases of passenger car to pedestrian collisions were selected from the database of In-depth Investigation of Vehicle Accident in Changsha of China (IVAC),of which the 12 pedestrian accidents involved in a minivan impact for each case, and the 6 accidents in a sedan impact for each. The selected cases were reconstructed by using mathematical models of pedestrians and accident vehicles in a multi-body dynamic code MADYMO environment. The logistic regression models of the risks for pedestrian AIS 3+ injuries and fatalities were developed in terms of vehicle impact speed by analyzing the minivan-pedestrian and sedan-pedestrian accidents. The difference of pedestrian kinematics was identified by comparing the results from reconstructed pedestrian accidents between the minivans and sedans collisions. The result shows that there is a significant correlation among the impact speed and the severity of pedestrian injuries. The minivan poses greater risk to pedestrian than sedan at the same impact speed. The kinematics of pedestrian was greatly influenced by vehicle front shape.
This study aimed at prediction of long bone fractures and assessment of lower extremity injury mechanisms in real world passenger car to pedestrian collision. For this purpose, two pedestrian accident cases with detail recorded lower limb injuries were reconstructed via combining MBS (Multi-body system) and FE (Finite element) methods. The code of PC Crash was used to determine the boundary conditions before collision, and then MBS models were used to reproduce the pedestrian kinematics and injuries during crash. Furthermore, a validated lower limb FE model was chosen to conduct reconstruction of injuries and prediction of long bone fracture via physical parameters of von Mises stress and bending moment. The injury outcomes from simulations were compared with hospital recorded injury data and the same long bone fracture patterns and positions can be observed. Moreover, the calculated long bone fracture tolerance corresponded to the outcome from cadaver tests. The result shows that FE model is capable to reproduce the dynamic injury process and is an effective tool to predict the risk of long bone fractures.
Das Fahren mit Licht am Tag wird seit dem 1. Oktober 2005 vom damaligen Bundesministerium für Verkehr, Bau und Stadtentwicklung (BMVBS) empfohlen. Weiterhin wurde im Februar 2011 auf europäischer Ebene beschlossen, alle neuen Fahrzeugtypen der Fahrzeugklasse M1 (Fahrzeuge zur Personenbeförderung mit vier Rädern und maximal 8 Sitzplätzen außer dem Fahrersitz) sowie der Fahrzeugklasse N1 (Kraftfahrzeuge zur Güterbeförderung mit mindestens vier Rädern und mit einem zulässigen Gesamtgewicht bis zu 3,5 t) mit speziellen Tagfahrleuchten (TFL) auszustatten. Seit August 2012 gilt diese Regelung auch für alle anderen Fahrzeugklassen. Vor dem Hintergrund dieser Entwicklung wird davon ausgegangen, dass sich das Fahren mit Licht am Tag immer weiter verbreitet. Um daraus resultierende Sicherheitsgewinne bewerten zu können, ist eine kontinuierliche Beobachtung der Lichteinschaltquoten am Tag erforderlich. Die Grundidee der kontinuierlichen Erfassung der Lichteinschaltquoten am Tag mit der angewendeten Erhebungsmethodik wird beschrieben. Im Fokus stehen die neuen Qualitätssicherungsmaßnahmen. Abschließend werden die bisher ermittelten Zeitreihen analysiert.