Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (49)
- Buch (Monographie) (29)
- Wissenschaftlicher Artikel (4)
- Teil eines Buches (Kapitel) (2)
- Bericht (2)
Schlagworte
- Simulation (86) (entfernen)
Institut
- Sonstige (86) (entfernen)
Research to inform policy is often challenged with how to genuinely use and implement research findings in decision-making and policy-planning. To begin with, the dialogue between researchers and decision-makers is essential to ensure profound understanding and legitimate interpretations of the results. Furthermore, the step to drawing practical conclusions and processing them into actions can only succeed if research findings are diffused to decision-making levels with influence on the matter, and mechanisms to knowledge transfer in the presence of a stable, favourable policy environment exist. Research investments into the topic of electromobility in Europe are substantial, and subtopics aiming to inform national policy-makers address a complex set of aspects from environmental and societal to technological and economic. This paper has a two-fold objective, the first of which is to present the results of scenarios to explore electromobility deployment in Finland, Germany and the European Union. The second is to discuss the challenges and solutions to bridge the gap from research findings towards decision-making and policy-planning, using the authors' electromobility scenario work as an example. The electromobility scenarios were built using the VECTOR21 model (Mock, 2010), and the rationale was to simulate vehicle sales and markets under different policy settings and calculate the most economical solution to fulfill regulation on COâ‚‚ emissions as set by the European Commission (2009). The model allows calculating the market diffusion of alternative powertrain technologies to the European market until 2030, taking into account different taxation schemes, incentives and other country-specific characteristics. The authors also present the cost-benefit-analysis of the modelling results to assess the different scenarios and to show variation between regions regarding profitability of alternative technological or political support and interventions. To proceed from research findings towards decision-making and policy-planning, the authors made observations relating to transfer of research knowledge and interpretation of their electromobility scenario results in national policy contexts. An evaluation of how the function of research to inform policy in this case succeeded is provided. In addition, the influence of expert opinions on the political decision-making process will be discussed through experiences from an expert questionnaire conducted to survey the importance of costs, time requirement, acceptance and other criteria of promotion measures of electromobility.
Ziel des Projektes war es, bedingt durch die wachsende Anzahl der im Verkehr befindlichen elektrisch und hybrid-elektrisch betriebenen Fahrzeuge, notwendige Anpassungen der periodisch technischen Überwachung zu erarbeiten. Dazu wurden von verschiedenen Fahrzeugen die relevanten Bauteile des elektrischen Antriebsstrangs identifiziert und deren Ausfallverhalten analysiert. Um die Degradationsauswirkungen einzelner Bauteile und Funktionen auf das gesamte System bestimmen zu können, hat die FSD ein Simulationsmodell erstellt. Die daraus ermittelten Ergebnisse waren Grundlage für die Bestimmung verkehrssicherheits- und umweltkritischer Bauteile sowie deren Funktionen. Diese Modellaussagen wurden mit Realversuchen an Fahrzeugen validiert. Zusätzlich konnten in einem Feldversuch 2.560 Fahrzeuge mit elektrischem Antriebsstrang untersucht werden. Aus diesen Ergebnissen lassen sich Änderungsvorschläge für die Untersuchungen und Vorgaben ableiten. Dafür ist für einen Großteil dieser Untersuchungen die Nutzung von Diagnosedaten eine geeignete Möglichkeit. Die 47. Verordnung zur Änderung straßenverkehrsrechtlicher Vorschriften berücksichtigt bereits an vielen Stellen die neuen Antriebskonzepte. Von daher werden lediglich geringe Anpassungen in der StVZO für -§ 19 und den Beispielkatalog dazu, -§ 29, Anlage VIIIa, Anlage VIIId sowie die HU-Richtlinie vorgeschlagen. Für die Durchführung der Untersuchungspunkte zum HV-System ist die Entwicklung einer Hochvolt-Richtlinie empfehlenswert. Einige wichtige Prüfverfahren lassen sich derzeit technisch noch nicht umsetzen. Dazu sind Änderungen der internationalen Bau- und Betriebsvorschriften notwendig. Diese werden bei der EU/UNECE anzuregen sein. Es besteht über dieses Projekt hinaus weiterhin Forschungsbedarf, um sich intensiv mit diesen Fahrzeugen zu befassen und deren Weiterentwicklung zu beobachten, damit notwendige Auswirkungen auf die PTI rechtzeitig erkannt werden können.
Im Rahmen dieses Forschungsvorhabens wurde ein Verfahren entwickelt und validiert, mit dem sich reale Emissionsfaktoren für motorisierte Zweiräder in der Systematik des HBEFA generieren lassen. Das Verfahren basiert auf Fahrzeug-Emissionsmessungen in realen Testzyklen, vermessen am Rollenprüfstand oder auf der Straße, als Eingabe für ein Simulationsmodell. Das Modell erzeugt aus den Messungen Motorkennfelder, in denen die Abgasemissionen und der Kraftstoffverbrauch über normierter Motordrehzahl und normierter Motorleistung abgelegt werden. Für jedes gemessene Kfz ergibt sich ein normiertes Emissions-Motorkennfeld. Aus den einzelnen Kennfeldern können dann Durchschnittskennfelder je Fahrzeugkategorie (z.B. Motorrad über 500ccm, EURO 3) gebildet werden. Die Motordrehzahl muss in den Emissionstests entweder gemessen, oder aus Geschwindigkeit, Gang, Reifenumfang und Übersetzungen berechnet werden. Die Motorleistung kann mittels gemessenem CO2-Massenstrom und der Drehzahl aus "generischen CO2-Kennfeldern" ermittelt werden, da im Allgemeinen keine gemessene Leistung vorliegt. Um mit dem Modell dann Emissionsfaktoren für beliebige Fahrzyklen zu bestimmen, wird die Motorleistung aus der Fahrzeuglängsdynamik, den Verlusten im Antriebstrang und dem Leistungsbedarf von Nebenaggregaten aus dem jeweils vorgegebenen Geschwindigkeits- und Steigungsverlauf berechnet. Zur Bestimmung der Drehzahl wird zuerst ein passender Gang berechnet und dann aus den Übersetzungen die Motordrehzahl. Steht die geforderte Motorleistung in keinem Gang zur Verfügung, wird die Beschleunigung im betroffenen Zeitschritt so reduziert, dass sich ein Volllastbetrieb ergibt. Die Berechnungen erfolgen in 1Hz Auflösung. Für jede Sekunde werden dann aus dem zugehörigen Motorkennfeld die Emissionen entsprechend der Drehzahl und Leistung interpoliert. Die integrierten Emissionswerte über den Zyklus ergeben die Summenemissionen, die Division durch die zurückgelegte Strecke die Emissionsfaktoren in g/km. Die Methode wurde im Simulationsprogramm PHEM implementiert. Da PHEM bereits in einem ähnlichen Verfahren Emissionsfaktoren für PKW, LNF und SNF berechnet, war der Zusatzaufwand zum Einbau von Zweirädern nieder und alle Zusatzfunktionen von PHEM können auch für Zweiräder verwendet werden (z.B. Dynamikkorrekturen, automatisierte CO2-basierte Kennfelderzeugung, Batch-Modus, etc.). In dem Projekt wurde die Modellentwicklung und Validierung anhand von 4 gemessenen Zweirädern durchgeführt. Die Tests umfassten Abgasmessungen auf einem Rollenprüfstand sowie On-Road-Messungen mittels PEMS. Die Messkampagne wurde auch genutzt, um einen Vorschlag für ein einheitliches Minimalmessprogramm zur Bestimmung von Emissionsfaktoren von Zweirädern zu erarbeiten. Dazu wurden umfangreiche Fahrversuche im realen Betrieb durchgeführt, die gemessenen Zyklen in Teilstücke verschiedener Verkehrssituationen unterteilt und je Verkehrssituation ein repräsentatives Teilstück bestimmt. Diese wurden dann zu "Real World Rollenzyklen" zusammengefügt. Bei einem Motorradzyklus ist auch ein sportlicher Fahranteil mit Steigung enthalten. Damit ist sichergestellt, dass die Motorkennfelder mit diesen Rollentests gut abgedeckt sind und bei der Berechnung von Emissionsfaktoren keine Extrapolationen von Emissionswerten erforderlich sind. Die am Markt befindlichen PEMS Systeme sind für die Verwendung bei Zweirädern wegen deren Gewicht und Baugröße nicht für alle Fahrzeuge geeignet. PEMS Messungen sind vorerst nur bei größeren Motorrädern im realen Verkehr möglich. Die Emissionskennfelder enthalten jeweils CO, CO2, NOx, HC sowie optional auch die vom FTIR gemessenen Komponenten und Partikelanzahl. Die nicht limitierten Abgaskomponenten aus der FTIR Messung können, wegen der teilweise sehr niederen Emissionsniveaus, nur unsicher zeitaufgelöst gemessen und simuliert werden, so dass hier die Verwendung von Zyklusmittelwerten in [g/km] oder von mittleren Prozentwerten an den HC und NOx Emissionen empfohlen wird. Mit der entwickelten Methode und der Software PHEM bestehen nunmehr die Grundlagen, Emissionsfaktoren für Zweiräder in gleicher Qualität wie sie bei PKW und Nutzfahrzeugen bereits Standard ist, zu gerieren. Die Methoden und mögliche gemeinsame Messprogramme werden in der ERMES Gruppe bereits diskutiert und werden hoffentlich schon 2018 zu einer deutlichen Verbreiterung der Datengrundlage zum Emissionsverhalten von Zweirädern führen.
Gegenstand der Untersuchung ist die Aufstellung differenzierter Kriterien für die Planung von Rettungssystemen auf der Grundlage vorliegenden Datenmaterials und bei Anwendung des Simulationsmodells Rettungswesen. Mit der Analyse der gegenwärtigen Situation werden die bestehenden Richtwerte und Planungsregeln aus den Rettungsdienstgesetzen und den entsprechenden Durchführungsverordnungen aufgelistet. Weiterhin werden mögliche Einflussgrößen, und ihre Bedeutung zur Planung von Rettungswachenbereichen und Fahrzeugvorhaltung dargestellt. Aus den Ergebnissen der Untersuchung werden entsprechende Schlussfolgerungen abgeleitet und für unterschiedlich strukturierte Gebiete erste allgemeingültige Planungsregeln aufgrund der empirischen Befunde erstellt, wobei sich diese Regeln an der derzeitigen Situation des Rettungsdienstes in der Bundesrepublik Deutschland orientieren. Mittels mathematischer Modelle werden variable Planungsregeln für den Rettungsdienst erstellt, wobei die Untersuchungsergebnisse der Studie hierbei nur als Basisinformation dienen. Die entwickelten Planungsregeln ermöglichen durch Variation einzelner Vorgaben (zum Beispiel Anfahrtszeit, Dispositionszeit) die Ermittlung der jeweils benötigten Anzahl von Standorten und Fahrzeugen.
The advent of active safety systems calls for the development of appropriate testing methods. These methods aim to assess the effectivity of active safety systems based on criteria such as their capability to avoid accidents or lower impact speeds and thus mitigate the injury severity. For prospective effectivity studies, simulation becomes an important tool that needs valid models not only to simulate driving dynamics and safety systems, but also to resolve the collision mechanics. This paper presents an impact model which is based on solving momentum conservation equations and uses it in an effectivity study of a generic collision mitigation system in reconstructed real accidents at junctions. The model assumes an infinitely short crash duration and computes output parameters such as post-crash velocities, delta-v, force directions, etc. and is applicable for all impact collision configurations such as oblique, excentric collisions. Requiring only very little computational effort, the model is especially useful for effectivity studies where large numbers of simulations are necessary. Validation of the model is done by comparison with results from the widely used reconstruction software PC-Crash. Vehicles involved in the accidents are virtually equipped with a collision mitigation system for junctions using the software X-RATE, and the simulations (referred to as system simulations) are started sufficiently early before the collision occurred. In order to assess the effectivity, the real accident (referred to as baseline) is compared with the system simulations by computing the reduction of the impact speeds and delta-v.
Among European Countries, Spain first issued a Standard, UNE 135900:2005, further updated in 2008, that deals with homologation and effectiveness evaluation of road restraint systems components designed to reduce harm for bikers impacting on them. An in depth analysis and critical review of this standard is reported in this paper. Beside a close examination of the standard requirements, numerical models of the crash test stated by the standard have been set up and simulated to study the effects of slight speed and approach angle variations on test results, remaining within tolerance gaps allowed by the standard. Model were validated against experimental data. Together with the expected increasing severity of the impact according with speed, a strong influence of approach angle on injury parameters was found. Possible improvements to the norm, in order to make it more robust, are suggested.
Tunnel sind bedeutende Infrastrukturbauwerke. Die Beurteilung der Folgen von Brandereignissen in Tunneln ist daher auch von außerordentlicher volkswirtschaftlicher Bedeutung. Ein solches Brandereignis stellt z.B. der Brand eines mit Benzin beladenen Tanklastzugs dar. Im Rahmen eines Forschungsvorhabens für die Bundesanstalt für Straßenwesen (BASt) wurden verschiedene Szenarien für diesen Extremfall mit unterschiedlichen Energiefreisetzungsraten und deren Einfluss auf die Tunneltragsicherheit mittels numerischer Strömungssimulationen und Finite-Elemente-Berechnungen untersucht. Es konnte gezeigt werden, dass selbst Brandszenarien mit Flüssigkeitslachenbränden von bis zu 28 t Benzin durch die ZTV-ING-Temperatur-Zeit-Kurve abgedeckt werden können. Der folgende Beitrag fasst die wesentlichsten Ergebnisse zusammen.
Ziel der Untersuchung war es, eine Methodik für die HBS-konforme Durchführung und Auswertung von Simulationsstudien zu erarbeiten. Dazu wurden HBS-konforme Standardelemente in den Simulationsprogrammen BABSIM, VISSIM, Aimsun, Paramics und SUMO modelliert und an den Bemessungswerten des HBS kalibriert. Die Ermittlung der Kapazität erfolgte anhand der Identifikation von Zusammenbrüchen des Verkehrsflusses, die durch Steigerung der Verkehrsstärke auf bis zu 120 % der Kapazität nach HBS in der Simulation erzeugt wurden. An Teilknotenpunkten wurden sechs Verhältnisse der Verkehrsstärke auf der Hauptfahrbahn zur Verkehrsstärke des ein- bzw. ausfahrenden Stroms untersucht. Als Kriterium für die Übereinstimmung der in der Simulation ermittelten Kapazität und q-v-Beziehung mit dem HBS wurde eine maximale Abweichung von 5 % festgelegt. Die Fehlergrenze konnte mit den Simulationsprogrammen BABSIM, VISSIM, Aimsun und Paramics in der Regel eingehalten werden, während sich in SUMO größere Abweichungen ergaben. Die Übertragbarkeit der Parametersätze auf nicht HBS-konforme Bemessungssituationen wurde anhand der Daten realer Untersuchungsobjekte überprüft. Im Ergebnis werden Empfehlungen und Standardparameterkombinationen für die HBS-konforme Simulation des Verkehrsablaufs auf Autobahnen bereitgestellt, die als Ausgangsparameter für die Simulation nicht HBS-konformer Untersuchungsobjekte herangezogen werden können.
The main objective of EC CASPER research project is to reduce fatalities and injuries of children travelling in cars. Accidents involving children were investigated, modelling of human being and tools for dummies were advanced, a survey for the diagnosis of child safety was carried out and demands and applications were analysed. From the many research tasks of the CASPER project, the intention of this paper is to address the following: • In-depth investigation of accidents and accident reconstruction. These will provide important points for the injury risk curve, in order to improve it. Different accident investigation teams collected data from real road accidents, involving child car passengers, in five different European countries. Then, a selection of the most appropriate cases for the injury risk curve and the purposes of the project was made for an in-depth analysis. The final stage of this analysis was to conduct an accident reconstruction to validate the results obtained. The in-depth analysis included on-scene accident investigation, creating virtual simulations of the accident/possible reconstruction, and conducting the reconstruction. In the cases of successful reconstructions, new points were introduced to the injury risk curves. Accident reconstructions of selected cases were carried out in test laboratories as the next step following in-depth road accident investigation. These cases were reconstructed using similar child restraint systems (CRS) and the same type make and model as in the real accidents. Reconstructing real cases has several limitations, such as crash angle, cars" approximation paths and crash speed. However, a few changes and applications on the testing conditions were applied to reduce the limitations and improved the representations of the real accidents. After conducting the reconstructions, a comparison between the deformations of the cars on the real accident and the vehicles from the reconstructions was made. Additionally, a correlation between the data captured from the dummies and the injury data from the real accident was sought. This finalises an in-depth analysis of the accident, which will provide new relevant points to the injury risk curve. The CASPER project conducted a large research programme on child safety. On technical points, a promising research area is the developing injury risk curves as a result of in-depth accident investigations and reconstructions. This abstract was written whilst the project was not yet finished and final results are not yet known, but they will be available by the time of the conference. All the works and findings will not necessarily be integrated in the industrial versions of evaluation tools as the CASPER project is a research program.
Bus or heavy vehicle passenger accidents are rare events, compared with car accidents, but sometimes leads to a large number of victims especially in rollover crash scenarios. Two accidents occurred in Portugal in 2007 and 2013 in which 28 people died and more than 50 are injured, shown the importance of the investigation of such accidents. For the investigation of these accidents multidisciplinary teams are constituted with engineers and police officers. All the factors involved are taken into consideration including road design, traffic signs, maintenance and hardware, human factors, and vehicle factors. In this work a methodology to an accurate collection of the data is proposed. From the information collected the accident is reconstructed using the PC-CrashTM software. From this all the contribution factors are determined and recommendations to mitigate these crashes are listed. These two accidents are rollover accidents and the analysis of the injuries and its correlation with the use of retention systems is very important. From the medical data and with the dynamics of the accident determined simulations of the occupants with biomechanical models are carried out in order to evaluate the effect of the retention systems in the injuries. This analysis is based on injury criteria (such as Abbreviated Injury Score (AIS) or Injury Severity Scale (ISS)). With this it is possible to determine if the seat belt was worn or not.
This work describes the results of the experimental activity, illustrating the driving behavior observed in different conditions, relating them to the different methods of ADAS intervention and comparing the driver behavior without ADAS. In the present study, driver behavior was studied in road accidents involving elderly pedestrians, with different ADAS HMIs, as a base to develop a driver model in near missing pedestrian accidents. A literature research was conducted with the aim of finding out the main influencing factors, including environment, boundary conditions, configuration of impact, pedestrian and driver information, when pedestrian fatalities occur and an analysis of frequent road accidents was conducted to get more detailed information about the driver- behavior. In order to obtain more detailed information about pedestrian accidents, real road accidents were reconstructed with multibody simulations on PC-Crash and, by the comparison between literature findings and reconstructions, a generic accident scenario was defined. The generic accident scenario was implemented on the full scale dynamic driving simulator in use at the Laboratory for Safety and Traffic Accident Analysis (LaSIS, University of Florence, Italy) in order to analyse the driving behaviors of volunteers, also considering the influence of ADAS devices. Forty-five young volunteers were enrolled for this study, resulting in forty valid tests on different testing scenarios. Two different scenarios consisted in driving with or without ADAS in the vehicle. Different kinds of ADAS, acoustic and optical, with different time of intervention were tested in order to study the different reactions of the driver. The tests showed some interesting differences between driver's behavior when approaching the critical situation. Drivers with ADAS reacted earlier, but more slowly, depending also on the type of alarm, and often with double reaction when braking. In fact, the results of the activity showed that with ADAS intervention the time to collision (TTC) increases, but the reaction time and braking modality change: a) there is a sort of "latency" time between the accelerator pedal release and the brake pressure; b) the brake pressure is initially less intense. So the driver only partially takes advance from the TTC increase. These differences were valued not only qualitatively, but quantitatively as well. This work revealed to be useful to improve the knowledge of drivers" behavior, in order to realize a driver model that can be implemented to help attaining and assessing higher levels of automation through new technology.
The number of road accidents in Portugal has decreased significantly in the last decades, however, this tendency is not similar in all types of transportation. In the most recent years and by European standards, Portugal is still one of the leading countries concerning the number of fatalities in Powered Two Wheelers (PTW) accidents. To this effect, the in-depth investigation of PTW accidents is crucial and so, a thorough statistical analysis concerning the main factors influencing PTW riders injury severity accidents was undertaken regarding the 2007-2010 period in the National Road Safety Authority (ANSR) injured riders database using the software SPSS. In addition, to determine the importance of absent factors in the database analysis, such as velocity, a set of 53 real accidents involving PTW were also investigated and computationally reconstructed using the software PC-Crash. Lateral collisions between a motorcycle, its rider and the side of three different passenger cars were also simulated, varying the motorcycle impact angle and velocity in order to estimate the PTW deformation energy and the rider- injuries, as this accident configuration stands out in terms of frequency and even severity. The results of this detailed study are presented.
Im Rahmen des vorliegenden Projekts wurden die verschiedenen Steuerungsverfahren einer Koordinierung untersucht. Dabei wurden im Schwerpunkt die festzeitgesteuerte Koordinierung, die verkehrsabhängige Steuerung mit Rahmenzeitplan und die vollverkehrsabhängige Steuerung miteinander verglichen. Zur Erfassung des Standes der Technik wurden Quellenanalysen durchgeführt. Zusätzlich fanden Expertengespräche statt, um auch Erfahrungen aus der Praxis in die Untersuchung einzubeziehen. Dabei stellte sich heraus, dass in der Fachwelt die Meinung vorherrscht, dass eine festzeitkoordinierte Steuerung nicht mehr dem Stand der Technik entspricht, da sie zu unflexibel ist. Um die tatsächliche Wirkung der Steuerungsverfahren zu überprüfen, wurden zehn Straßenzüge durch empirische Messungen und Simulationen untersucht. Die auf den Straßenzügen in der Realität vorhandenen Steuerungen wurden in den Simulationsmodellen exakt nachgebildet und neue Steuerungen wurden entwickelt. Dadurch konnten umfangreiche Vergleiche zwischen vorhandenen und optimierten Steuerungen sowie zwischen verkehrsabhängigen und festzeitgesteuerten Koordinierungen angestellt werden. Die Bewertung der Verfahren erfolgte anhand eines Performance Index, der die Anzahl der Halte und die Wartezeiten in jeder Knotenpunktzufahrt des Netzes berücksichtigt. Die Untersuchungen führten zu dem Ergebnis, dass die verkehrsabhängige Steuerung keineswegs nur Vorteile gegenüber der Festzeitsteuerung hat. Es ergaben sich je nach Verkehrssituation sehr unterschiedliche Qualitäten der Steuerungsverfahren. In der Simulation wurde außerdem deutlich, dass eine vollverkehrsabhängige Steuerung ohne Rahmenplan nicht geeignet ist für die Steuerung eines Straßenzuges. In den deutschen Richtlinien wird bisher kein Verfahren zur Bestimmung der Verkehrsqualität verkehrsabhängiger Steuerungen beschrieben. In dieser Untersuchung wurde zusätzlich zu den Simulationen ein theoretisches Verfahren zur Bewertung verkehrsabhängiger Steuerungen vorgestellt. Aus den so gewonnenen Untersuchungsergebnissen wurden schließlich Kriterien für die Einsatzbereiche der verschiedenen Steuerungsverfahren entwickelt, die eine Entscheidungsfindung zukünftiger Planungsvorhaben erleichtern sollen.
Ziel des vorliegenden Forschungsvorhabens ist die Erarbeitung weitergehender Anforderungen an elektroakustische Anlagen in Straßentunneln unter Beachtung der technischen und wirtschaftlichen Umsetzbarkeit. Hierzu sind allgemeingültige Kriterien zu definieren, anhand derer eine elektroakustische Beschallungsanlage für Tunnel ausgelegt werden kann, ohne dass aufwändige schalltechnische Einzeluntersuchungen durchgeführt werden müssen. Aus den bereits vorliegenden Projekten wurden Ergebnisse schalltechnischer Untersuchungen aus 19 Tunneln kategorisiert und vergleichend gegenübergestellt. Es wurden folgende wesentliche Erkenntnisse gewonnen: - Die Nachhallzeiten liegen im Bereich von 5 s bis 10 s, im mittleren Bereich und für tiefe Frequenzen ansteigend bis auf 27 s. Die Nachhallzeiten typischer Tunnel unterscheiden sich nur unwesentlich. - Nachhallzeitmessungen sind daher nicht notwendig. Wichtig ist die Beurteilung der Primärstruktur eines Tunnels. - Es gibt besondere Schallleitungseigenschaften von Tunnelröhren, die durch die Reflektionen entstehen. Diese Struktur zeichnet sich durch nützliche Schallreflexionen aus, die sich für eine Sprachverständlichkeit fördernde Unterstützung nutzen lassen. Daraus lassen sich folgende akustische Anforderungen an einen für Tunnelbeschallungen geeigneten Lautsprecher formulieren: - horizontale und vertikale Abstrahlwinkel von etwa jeweils 30 bis 35-°, - Rückwärtsdämpfung von ARueck ≥ 30 dB, - Schalldruckpegel Lpmax ≥ 130 dB(SPL), - Übertragungsfrequenzgang 300Hz bis 12000 Hz. Auf Grund dieser Erkenntnisse werden Versuche in einem zur Verfügung gestellten Testtunnel mit auf dem Markt befindlichen Lautsprechersystemen durchgeführt, was zu folgenden Aussagen für die Konzeption einer Beschallungsanlage führt: - Herkömmliche Lautsprecher sind für eine Beschallung mit Sammelruf ungeeignet. - Ein nach dem Prinzip des Grenzflächenhorns entwickelter Speziallautsprecher hatte geeignete akustischen Eigenschaften. - Die Lautsprecher müssen zeitlich angepasst werden. - Eine Sprachverständlichkeit von mindestens STI ≥ 0,45 ist anforderungsgerecht. Bei Messungen in Tunneln, deren Beschallungsanlagen unter Berücksichtigung der im Forschungsvorhaben gewonnenen Erkenntnisse ausgelegt wurden, werden Sprachverständlichkeitswerte mit im Mittel STI = 0,52, 0,50 und 0,49 festgestellt. Der Originalbericht enthält als Anhang "Generalisierte Muster-Ausschreibungs-Module für ein SLASS-Beschallungssystem " Erläuterungsbericht / Technische Vorbemerkungen / Leistungs-Positionstexte". Er steht ebenfalls als Download zur Verfügung.
Mit einem Simulationsmodell wurden die Auswirkungen des Lkw-Überholverbots auf zweistreifigen Richtungsfahrbahnen in der Ebene und an Steigungsstrecken untersucht. Dabei wurde ein Einfluss von Anschlussstellen und von vorausliegenden Abschnitten (zum Beispiel Baustellen, Rückstau) ausgeschlossen. In Abhängigkeit vom Lkw-Anteil und von der Verkehrsstärke wurden Bereiche aufgezeigt, in denen sich die Geschwindigkeit des Verkehrsflusses steigert und in denen sich die Anzahl der Konfliktsituationen beim Fahrstreifenwechsel reduziert. Eine Umsetzung der Ergebnisse in ein Steuerungverfahren von Wechselverkehrszeichenanlagen ist damit möglich. Vor einer Anordnung des Lkw-Überholverbots mit statischer Beschilderung kann mit dem entwickelten Modell berechnet werden, zu welchen Tageszeiten und ab wieviel Tonnen (zum Beispiel größer 4 t) eine solche Anordnung sinnvoll ist.
Pedestrian and cyclist are the most vulnerable road users in traffic crashes. One important aspect of this study was the comparable analysis of the exact impact configuration and the resulting injury patterns of pedestrians and cyclists in view of epidemiology. The secondary aim was assessment of head injury risks and kinematics of adult pedestrian and cyclists in primary and secondary impacts and to correlate the injuries related to physical parameters like HIC value, 3ms linear acceleration, and discuss the technical parameter with injuries observed in real-world accidents based documented real accidents of GIDAS and explains the head injuries by simulated load and impact conditions based on PC-Crash and MADYMO. A subsample of n=402 pedestrians and n=940 bicyclists from GIDAS database, Germany was used for preselection, from which 22 pedestrian and 18 cyclist accidents were selected for reconstruction by initially using PC-Crash to calculate impact conditions, such as vehicle impact velocity, vehicle kinematic sequence and throw out distance. The impact conditions then were employed to identify the initial conditions in simulation of MADYMO reconstruction. The results show that cyclists always suffer lower injury outcomes for the same accident severity. Differences in HIC, head relative impact velocity, 3ms linear contiguous acceleration, maximum angular velocity and acceleration, contact force, throwing distance and head contact timing are shown. The differences of landing conditions in secondary impacts of pedestrians and cyclists are also identified. Injury risk curves were generated by logistic regression model for each predicting physical parameters.
Motorcycle safety research
(2007)
Honda- global motorcycle sales exceeded the 10 million units mark since 2004, and further expansion is expected. As a responsibility for a company to provide mobility, Honda is focusing on motorcycle safety as top priority and has been working on various activities for both aspects of hardware and software. Here, we present Honda- activity for the safety technology of motorcycles. At present, Honda is promoting motorcycle safety in the four themes of prevention and collision safety such as safety education, recognition assistance, accident prevention and injury reduction. First, in the area of the safety education, the "Honda Safety Driving Promotion Center" was established in 1970, and motorcycle riders and vehicle driver trainings have been organized, and the traffic training centers are used as an actual practice field not only in Japan but also in many other regions in the world. Through our training activities, the new area of safety training with hardware assistance was developed and Honda- unique technology was accumulated such as the riding simulator which can provide experience of potentially dangerous situations without risk. Especially, the "riding trainer", the popular version of the riding simulator, was introduced at several motor shows in various countries and launched in September 2005. It was distributed first in Europe and is expected to expand globally aiming at 3000 units worldwide.. And in Europe, the newest version, which includes the suburban roads program, jointly developed with ADAC, will be released in near future. In the area of recognition assistance, "vehicle to vehicle communication technology" is under development using the advantage of being a manufacturer of both motorcycles and cars. This technology is under research as Honda "ASV-3" in Japan, and as part of C2C activity in Europe. As for the accident prevention, advanced brake systems for motorcycles to assist more effective brake operation have been expanded, Honda signed the European Road Safety Charter in April 2004 with the advanced brake systems commitment and furthermore, they are expanding according to vehicle characteristics and region. Then all models above 250 cc will have a version of the system by 2010. And as the last theme, "motorcycle airbag system" is introduced which is equipped on a mass production motorcycle for the first time in the world. It has been researched and developed for a long time as an injury reduction technology for collision accidents. Honda automobile technology was used for the research and development of the motorcycle airbag, and many specific issues such as the analysis of the collision conditions particular to motorcycles have been solved to realize today- success. It might be known that ADAC in-house crash test held in August this year confirmed the high effectiveness of the airbag system and showed a positive result. This motorcycle airbag system is equipped to the Honda Gold Wing and launched in North America in August, 2006. Also in Europe, it will be sold by the end of this year. Each theme of Honda motorcycle safety technology can be seen at the Honda booth.
The head impact of pedestrians in the windscreen area shows a high relevance in real-world accidents. Nevertheless, there are neither biomechanical limits nor elaborated testing procedures available. Furthermore, the development of deployable protection systems like pop-up bonnets or external airbags has made faster progress than the corresponding testing methods. New requirements which are currently not considered are taken into account within a research project of BASt and the EC funded APROSYS (Advanced PROtection SYStems) integrated project relating to passive pedestrian protection. Testing procedures for head impact in the windscreen area should address these new boundary conditions. The presented modular procedure combines the advantages of virtual testing, including full-scale multi-body and finite element simulations, as well as hardware testing containing impactor tests based on the existing procedures of EEVC WG 17. To meet the efforts of harmonization in legislation, it refers to the Global Technical Regulation of UNECE (GTR No. 9). The basis for this combined hardware and virtual testing procedure is a robust categorization covering all passenger cars and light commercial vehicles and defining the testing zone including the related kinematics. The virtual testing part supports also the choice of the impact points for the hardware test and determines head impact timing for testing deployable systems. The assessment of the neck rotation angle and sharp edge contact in the rear gap of pop-up bonnets is included. For the demonstration of this procedure, a hardware sedan shaped vehicle was modified by integrating an airbag system. In addition, tests with the Honda Polar-II Dummy were performed for an evaluation of the new testing procedure. Comparing these results, it was concluded that a combination of simulation and updated subsystem tests forms an important step towards enhanced future pedestrian safety systems considering the windscreen area and the deployable systems.
Im vorliegenden Forschungsvorhaben wurden Nutzen und Kosten nicht vollständig signalisierter Knotenpunkte unter besonderer Berücksichtigung der Verkehrssicherheit behandelt. Für sechs ausgewählte Beispielknotenpunkte mit nicht vollständiger Signalisierung wurde der Verkehrsablauf vor Ort beobachtet, in Simulationsmodellen nachgebildet und bei unterschiedlichen Belastungsverhältnissen analysiert. Ein wesentliches Ergebnis der Simulationsuntersuchung war, dass an den Beispielknotenpunkten bei nicht vollständiger Signalisierung der Verkehr bei einer Belastung von bis zu 2.000 Kraftfahrzeuge pro Stunde (Kfz/h) in der Hauptrichtung (Querschnitt) und zwischen 100 Kfz/h bis 300 Kfz/h in der Nebenrichtung mit ausreichender Qualität bedient werden kann. Ein Vergleich mit den Simulationsergebnissen für den unsignalisierten Zustand ergab, dass bei nicht vollständiger Signalisierung der Verkehr deutlich leistungsfähiger abgewickelt werden kann. Durch eine Vollsignalisierung hingegen lassen sich gegenüber der nicht vollständigen Signalisierung in der Regel keine zusätzlichen Kapazitätsreserven mobilisieren. Neben der Verkehrsqualität ist die Verkehrssicherheit das zweite maßgebende Kriterium für die Beurteilung der Knotenpunkte mit nicht vollständiger Signalisierung. Die Verkehrsunfallanalyse erbrachte für die Innerortsknotenpunkte keine Erkenntnisse, die gegen die Einführung einer nicht vollständigen Signalisierung sprechen. Für Außerortsknotenpunkte wird empfohlen, die Untersuchungen zum Thema Verkehrssicherheit auf der Grundlage eines deutlich erweiterten Stichprobenumfangs zu vertiefen. Die nicht vollständige Signalisierung stellt eine kostengünstige Alternative zur Vollsignalisierung dar. Die Investitionskosten für die nicht vollständige Signalisierung liegen bei 35 bis 70 Prozent der Investitionskosten für die Vollsignalisierung. Unter Berücksichtigung der Betriebskosten ergeben sich gegenüber der Vollsignalisierung Einsparungsmöglichkeiten in Höhe von 3.500 - 5.500 Euro/Jahr.
Pedestrian accidents are one of the major concerns related with road accidents around the world. Portugal has one of the highest rates of pedestrian fatalities in Europe. In this paper an overview conditions were the pedestrian accidents occurred in Portugal is presented. In the last years, a project related with the pedestrian accidents has run in Portugal for the period 2004-2006 where 603 people died, 2097 have been severely injured and about 17000 slightly injured. Within this project all the pedestrian accidents in this period have been analysed providing global information about a wide range of aspects, since location, driver and pedestrian characteristics, weather and road conditions, among others. In addition, 50 in-depth accidents have been investigated and the data collected according the Pendant methodology. For this in-depth methodology detailed information about the accident has been collected, including injuries, vehicle damage, road conditions and road user- behaviour and actions. An accident reconstruction has been carried for each case including the determination of the speeds and driver actions, and the analysis of the contributing factors for the accident. Depending of the accident complexity, different methodologies have been used to analyse these accident, from the classical analytical equations such as Simms and Woods, to the use of detailed computational pedestrian models as those included in the commercial software- PC-Crash-® or Madymo-®. Also one of the goals of our investigation is the development of multibody models and methodologies for the reconstruction of pedestrian accidents. Some of these tools integrated in the commercial software Cosmos Motion-® are presented. The advantages of the different approaches are compared and discussed for some of the accidents investigated. With these tools the impact speed can be determined from the projection distance with analytical tools or PC-Crash-®, but more complex tools should be used to determine speed from the injuries, what is especially important for fatal accidents. The influence of the vehicle geometry and stiffness characteristics is another aspect analysed, where the influence of the vehicle stiffness has been determined using a combined multibody-finite elements approach within the software Madymo-®.