Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
Schlagworte
- Accident prevention (53) (entfernen)
Institut
- Sonstige (53) (entfernen)
Estimation of the benefits for the UK for potential options to modify UNECE Regulation No. 95
(2010)
The side impact problem in Europe remains substantial. UK data shows that between 22% and 26% of car occupant casualties are involved in a side impact, but this rises to between 29% and 38% for those who are fatally injured. This indicates the more injurious nature of side impacts compared with frontal impacts. The European Enhanced Vehicle safety Committee (EEVC) has performed work to address the side impact issue since 1979. As part of its continuing work, it has recently investigated potential options for regulatory changes to improve side impact protection in cars further. To support this work the UK undertook an analysis to estimate the benefit for potential options to modify UNECE Regulation 95. The analysis used the UK national STATS19 and detailed Co-operative Crash Injury Study (CCIS) accident databases. Of the potential options reviewed, it was found that the addition of a pole test offered the greatest benefit.
Accident data shows that the vast majority of pedestrian accidents involve a passenger car. A refined method for estimating the potential effectiveness of a technology designed to support the car driver in mitigating or avoiding pedestrian accidents is presented. The basis of the benefit prediction method consists of accident scenario information for pedestrian-passenger car accidents from GIDAS, including vehicle and pedestrian velocities. These real world pedestrian accidents were first reconstructed and the system effectiveness was determined by comparing injury outcome with and without the functionality enabled for each accident. The predictions from Volvo Cars" general Benefit Estimation Model are refined by including the actual system algorithm and sensing models for a relevant car in the simulation environment. The feasibility of the method is proven by a case study on a authentic technology; the Auto Brake functionality in Collision Warning with Full Auto Brake and Pedestrian Detection (CWAB-PD). Assuming the system is adopted by all vehicles, the Case Study indicates a 24% reduction in pedestrian fatalities for crashes where the pedestrians were struck by the front of a passenger car.
In a first step, we have examined approximately 23 000 single vehicle accidents within the Austrian National Statistics database. In a second step, we considered 15% of all fatal "running off the road" accidents that occurred in Austria in 2003. As a result, two accident categories were specified; "leaving the road without preceding manoeuvre" and "leaving the road with preceding manoeuvre". These two categories can be basically characterised by the vehicle- heading angle and its velocity angle. In this report, we further suggest theoretical approaches for the dimensioning of a safety zone, an area adjacent to the road free of fixed objects or dangerous slopes. We also show the link between the two accident categories mentioned above and the real world accidents analysed in detail. These observations also form the basis for the required length for safety devices. Finally, we summarise accident avoidance strategies.
Over the last decades the number of traffic accident fatalities on German roads decreased by 77% down to 4968 in the year 2007. This positive development is due to optimisations of vehicle safety, roads and infrastructure and medical rescue issues. Up to now mostly the optimisations of secondary safety measures lead to this effect on vehicle safety. Since some years more and more driver assistance systems are available and lead to a further reduction of all accidents. These new systems are often comfort systems and have not primarily been developed to increase vehicle safety. In contrast to secondary safety systems primary safety systems are able to mitigate and avoid accidents. So in the future it is important to estimate the benefit of these systems in reducing accident numbers as well. Current benefit estimation methods mostly focus on a single system only and not on the combination of systems. In this paper a new method for a multivariate benefit estimation based on real accident data is developed. The paper describes the basic method to estimate the benefit of primary and secondary safety systems in combination. With the presented method the benefit will not be overestimated as it would be by a simple addition of the benefits of single systems. The model will be validated by a multivariate prospective benefit estimation of different vehicle safety systems in comparison to single benefit estimations of the same systems. For this the German In-Depth Accident Database is used. The results show the importance to implement the interactions of safety systems in the estimation process and rate the overestimation by a simple addition of the single system benefits. The validation includes primary and secondary safety systems in combination. The validation is done using more than 3500 real accidents which were initiated by cars. This sample out of the GIDAS database is representative for the current accident situation in Germany. The paper shows the necessity of a multivariate estimation of the benefit for existing and future safety systems.
A set of recommendations for pan-European transparent and independent road accident investigations has been developed by the SafetyNet project. The aim of these recommendations is to pave the way for future EU scale accident investigation activities by setting out the necessary steps for establishing safety oriented road accident investigations in Member States. This can be seen as the start of the process for establishing road accident investigations throughout Europe which operate according to a common methodology. The recommendations propose a European Safety Oriented Road Accident Investigation Programme which sets out the procedures that need to be put in place to investigate a sample of every day road accidents. They address four sets of issues; institutional addressing the characteristics of the programme; operational describing the conditions under which data isrncollected; data storage and protection; and reports, countermeasures and the dissemination of data.rn
Methods for analyzing the efficiency of primary safety measures based on real life accident data
(2009)
Primary safety measures are designed to help to avoid accidents or, if this is not possible, to stabilize respectively reduce the dynamics of the vehicle to such an extent that the secondary safety measures are able to act as good as possible. The efficiency of a primary safety measure is a criterion for the effectiveness, with which a system of primary safety succeeds in avoiding or mitigation the severity of accidents within its range of operation and in interactionwith driver and vehicle. Based on Daimler-´s philosophy of the "Real Life Safety" the reflection of the real world accidents in the systems range of operation is both starting point as well as benchmark for its optimization. This paper deals with the methodology to perform assessments of statistical representative efficiency of primary safety measures. To be able to carry out an investigation concerning the efficiency of a primary safety measure in a transparent and comparable way basic definitions and systematics were introduced. Based on these definitions different systematic methods for estimating efficiency were discussed and related to each other. The paper is completed by presenting an example for estimating the efficiency of actual "single" and "multi" connected primary safety systems.
In the last years various new driver information and driver assistance systems made their way into modern vehicles and there are yet countless systems underway. However, expenses for both, the development and the construction of these systems are tremendous. Therefore the interest of evaluating systems keeps growing steadily, not only regarding the results of systems developed in the last years but also regarding system ideas. Only if at least a rough benefit estimation is given, the industry can decide which development should be supported. However, there is still a lack of transparency of possible and useful methods for these kinds of estimations. These were analyses and structured in this study.
Bicyclists are minimally or unprotected road users. Their vulnerability results in a high injury risk despite their relatively low own speed. However, the actual injury situation of bicyclists has not been investigated very well so far. The purpose of this study was to analyze the actual injury situation of bicyclists in Germany to create a basis for effective preventive measures. Technical and medical data were prospectively collected shortly after the accident at the accident scenes and medical institutions providing care for the injured. Data of injured bicyclists from 1985 to 2003 were analyzed for the following parameters: collision opponent, collision type, collision speed (km/h), Abbreviated Injury Scale (AIS), Maximum AIS (MAIS), incidence of polytrauma (Injury Severity Score >16), incidence of death (death before end of first hospital stay). 4,264 injured bicyclists were included. 55% were male and 45% female. The age was grouped to preschool age in 0.9%, 6 to 12 years in 10.8%, 13 to 17 years in 10.4%, 18 to 64 years in 64.7%, and over 64 years in 13.2%. The MAIS was 1 in 78.8%, 2 in 17.0%, 3 in 3.0%, 4 in 0.6%, 5 in 0.4%, and 6 in 0.2%. The incidence of polytrauma was 0.9%, and the incidence of death was 0.5%. The incidence of injuries to different body regions was as follows: head, 47.8%; neck, 5.2%, thorax, 21%; upper extremities, 46.3%; abdomen, 5.8%; pelvis, 11.5%, lower extremities, 62.1%. The accident location was urban in 95.2%, and rural in 4.8%. The accidents happened during daylight in 82.4%, during night in 12.2%, and during dawn/dusk in 5.3%. The road situation was as follows: straight, 27.3%; bend, 3.0%; junction, 32.0%; crossing, 26.4%; gate, 5.9%; others, 5.4%. The collision opponents were cars in 65.8%, trucks in 7.2%, bicycles in 7.4%, standing objects in 8.8%, multiple objects in 4.3%, and others in 6.5%. The collision speed was grouped <31 in 77.9%, 31-50 in 4.9%, 51-70 in 3.7%, and >70 in 1.5%. The helmet use rate was 1.5%. 68% of the registered head injuries were located in the effective helmet protection area. In bicyclists, head and extremities are at high risk for injuries. The helmet use rate is unsatisfactorily low. Remarkably, two thirds of the head injuries could have been prevented by helmets. Accidents are concentrated to crossings, junctions and gates. A significant lower mean injury severity was observed in victims using separate bicycle lanes. These results do strongly support the extension or addition of bicycle lanes and their consequent use. However, the lanes are frequently interrupted at crossings and junctions. This emphasizes also the important endangering of bicyclists coming from crossings, junctions and gates, i.e. all situations in which contact of bicyclists to motorized vehicles is possible. Redesigning junctions and bicycle traffic lanes to minimize the possibility of this dangerous contact would be preventive measures. A more consequent helmet use and use and an extension of bicycle paths for a better separation of bicyclists and motorized vehicle would be simple but very effective preventive measures.
While the number of fatal accidents is diminishing every year, there is still a need of improvement and action to prevent these deaths. Basis for this purpose has to be an analysis about the factors influencing the car crash mortality. There are various studies describing the univariate influence of several factors, but crash scenarios are too complex to be described by a single variable. The multivariate analysis respects the interference of the variables and gets so to more detailed and representative results. This multivariate analysis is based on about 2,600 cases (the data have been collected by the accident research units Hannover and Dresden (during the years 1999-2003). This paper presents a multivariate model (containing ten different variables) which detects 93% of these cases properly. This means it detects the cases as truly survived and truly death.
This paper describes the methodology of In-Depth Investigation in Germany on the example of GIDAS (German In-Depth Accident Study). Since 1999 in Germany a joint project between FAT (Forschungsvereinigung Automobiltechnik or Automotive Industry Research Association) and BASt (Bundesanstalt für Straßenwesen or the Federal Road Research Institute) is being carried out in Hannover and Dresden. The methodology of this project is based on a statistically orientated procedure of data sampling (sampling plan, weighting factors). The paper describes the possibilities of such in-depth investigation on the results of the offered title. The accident cases were collected randomly within GIDAS at Hannover. There are more cases existing from previous investigation started in 1985 under the same methodology. The portion of rollovers can be established at 3.7% of all accidents with casualties in the year 2000. For the study 434 cases of car accidents with rollovers are used for a detail comprehensive analysis. The accidents happened in the years 1994 to 2000 in the Hannover area. The injury distribution will report about 741 occupants with rollover accident event. The presented paper will give an overview of the accident situations following in rollover movements of cars. The distributions of injury frequencies, injury severity AIS for the whole body and for the body regions of occupants will be presented and compared to technical details like the impact speed and the deformation pattern. The speed of the car was determined at the point of rollover and on the point of accident initiency. The characteristics of the kinematics followed in a rollover movement are analyzed and the major defined types of rollover will be shown in the paper. The paper will describe the possibilities of In-Depth Investigation methods for the approach of finding countermeasures on the example of car accidents with rollover and explaining the biomechanics of injuries in rollover movements.
Nigeria ranks one of the highest countries in the world with the largest accident, especially when measured by whiplash associated disorders, whereas, traffic safety education rate, data and information been widely known as preventive indicators have been grossly neglected. In Nigeria, traffic safety enlightenment, awareness, political understanding and appreciation of the problem's magnitude are lacking. This study, therefore, seeks to understand and document the fact that accident causation factors in Nigeria relate more to the problem of development, poverty, knowledge and education as evidenced in most other developing countries. Among the primary accident causation factors on Nigerian roads are: - lack of a transportation system or multi-model integration - sub-standard and obsolete vehicles and road furniture - poor road maintenance, investment and engineering management - paucity of road users' and drivers' knowledge, skill, enlightenment and education of the road Use This paper submits that Nigeria being a developing nation requires purely primitive strategies being cost effective (health wise) than curative measures. It is in this light that an enduring, comprehensive and sustainable traffic safety educational programmes information base and data inventory, analysis and implementations form the focus of this study. This effort will provide basic guidelines framework and implementation procedure for a successful prevention of whiplash associated disorder resulting from road traffic crashes in Nigeria and other parts of the world.
Because of actual developments and the continuous increase in the field of drive assistant systems, representative and detailed investigations of accident databases are necessary. This lecture describes the possibility to estimate the potential of primary and secondary safety measures by means of a computerized case by case analysis. Single primary or secondary safety measures as well as a combination of both are presented. The method is exemplarily shown for the primary safety measure "Brake Assist" in pedestrian accidents. Regarding accident prevention only the primary safety measure is determined.
The European Union has set a target to reduce all road fatalities (over 40,000) with 50% in 2010. This target percentage remained unchanged with the introduction of the ten new member states within the EU as by May 1st, 2004. According to Eurostat, 34% of all fatalities in 1998 in the, then, fifteen states of the European Union were the result of single vehicle collisions. This represents over 14,000 lives lost each year of which many can likely be saved through better roadside infrastructure design. The challenge for road safety professionals is to find methods and design strategies that help to reduce these casualties. Procedures for full-scale vehicle crash testing of guard rails were first published in the US in 1962. Present European regulation is mainly based on these procedures and later developments. Since then the vehicle fleet has changed considerably. Due to the complexity of the actual safety problem the numerical simulation approach offers a good opportunity to evaluate the different parameters involved in road safety, such as infrastructure properties, vehicle type, vehicle occupants and injuries. The ideal situation would be that simulation tools are coupled or integrated and all involved effects would be related. At the moment this is not the case yet, but initiatives are taken and a new virtual era has started. This paper offers a method looking at two components that encompass the driving environment: the car and the guardrail. As part of the EC-funded project, RISER (Roadside Infrastructure for Safer European Roads) a multi body simulation program study is carried out to determine sensitivities of some parameters in car to guardrail collisions and gives insides in performance of the car with passive safety equipment, the guardrail and the interaction of these objects with each other. By offering a set of methods that includes these two aspects and their intertwining relations, more confidence can be gained in actually reducing fatalities due to single vehicle collisions with, or due to, roadside furniture. Reducing the number of fatalities of single vehicle crashes would contribute greatly to the stated goal of reducing casualties altogether.
This study examines the severity and types of injuries sustained by child pedestrians aged 18 years and below in order to identify the body regions at greatest risk for injury in a pedestrian accident. Detailed medical diagnoses were reviewed retrospectively for 572 child pedestrians admitted to an urban pediatric trauma center with injuries during the time period from January 2001 to December 2005. Eighty percent of these children sustained AIS 2 or greater injuries, most commonly to the lower extremity (41%) and head (34%). Fortyfour percent of admitted children had more significant AIS 3 or greater injuries primarily to the head (58%), thorax (17%) and lower extremities (14%). Testing procedures to assess the child- interaction with the motor vehicle should include injury assessment for the pediatric head, thorax and lower extremities. This understanding of how child pedestrians interact with motor vehicles may provide insight into effective countermeasures with potential for implementation in vehicle designs world-wide.
The objective of this study was to identify aspects of the individual experience and behaviour of drivers in intersection accidents. A total of 40 accident drivers sketched their ideas and expectations relating to intersection assistance using the method of Structure Formation Technique. Using this method prepared content cards and relation cards for a subject matter are formed together in a structure through the application of an explicit set of rules. The structures generated in this process were compared with the structures of 20 control persons who have not recently experienced an accident at intersections. The basis for this comparison was a case-control design with matched samples regarding the variables age, sex, education, occupation, driving experience and annual mileage. The results of the accident reports indicate that additional assistance is instrumental in the perception of other road users. Generally the interviewed drivers were open-minded towards the use of intersection assistance systems. Drivers who have recently experienced an accident at intersections significantly more often approved of warning assistance in their vehicle than drivers who have not recently experienced an accident. Further accident experienced drivers favoured warning and information via audio warning more frequently. The ideas of the drivers were strongly shaped by the experiences with already available advanced driver assistance systems. Hence acoustic and visual warnings were generally preferred to tactile warnings. The findings also indicate a relationship between the variable age and the acceptance of automatic vehicle intervention, and the suggestion of a head up display as a configuration of a visual warning system.
The primary goal of this investigation was to determine the relative risk of traffic accidents in students. In a two year period, a survey amongst 2,325 students was carried out, and 3,645 injuries sustained by students treated at our hospital were analyzed. Moped-riding in adolescents were associated with a 23.75-fold increased risk for injury as compared to biking. Children who ride bicycles have a 2.2-fold increased risk for an injury sustained by traffic accidents compared to pedestrians. None of 50 injured bicycle riders with helmet had an AIS for head injuries of more than 2. 24 of 233 injured bicycle drivers without helmet had an AIS for head injuries of more than 2. The use of a protective helmet significantly reduced the severity of head injuries. The level of awareness towards danger and a history of previous accidents correlate with the likelihood of future accidents. Due to the severity of traffic accidents, more adequate prevention measures (wearing of bicycle helmets and better education for moped riders) are urgently needed.
In recent years the boundaries between active and passive safety blurred more and more. Passive safety in the traditional term includes all safety aspects to prevent occupants to be injured or at least injury severity should be reduced. Passive Safety starts with the collision (first vehicle contact) and ends with rescue (open vehicle doors). Within this phase the occupant has to be protected by the passenger compartment whereby no intrusion should occur. Active safety on the other side was developed to interact prior to the collision whereby the goal is to prevent accidents. The extensive interaction between active and passive safety led to the terminologies "Primary" and "Secondary" safety whereas the expression Integrated Safety Concept was generated. Within this study the most well documented single vehicle accidents with cars not equipped with ESP were identified from the PENDANT database and reconstructed. Additional cases were found in the database ZEDATU of TU Graz. In comparison each case was simulated with the assumption that the cars were equipped with ESP. The differences regarding accident avoidance or crash severity as well as reduction of injury risk were analysed.
Immer wieder werden Straßenbaumaßnahmen geplant und realisiert, bei denen die Möglichkeiten der geltenden Technischen Regelwerke für eine verkehrssichere Gestaltung nicht ausgeschöpft werden. Zielsetzung des Forschungsvorhabens war es, Schulungsunterlagen zu entwickeln, die sowohl zur Qualifizierung von Sicherheitsauditoren als auch zur Weiterbildung von Planern geeignet sind. Die zu erstellenden Materialien sollen Planern und Auditoren das Erkennen von Defiziten sowie das Vermeiden von Planungsfehlern erleichtern. Neben verfügbaren Auditauswertungen Dritter und 315 von den Forschungsnehmern selbst erstellten Auditberichten wurden bestehende Schulungsunterlagen für Planer bzw. Sicherheitsauditoren auf ihren Umfang, ihre Inhalte und Konzepte hin ausgewertet. Die Festlegung der Schulungsmodule orientierte sich sowohl an den bereits in der Praxis angewendeten Curricula für die Auditorenausbildung als auch an der durchgeführten Auswertung vorhandener Auditberichte sowie der Analyse vorliegender Schulungsunterlagen. Die Schulungsmodule und deren Inhalte wurden im Arbeitsausschuss Sicherheitsaudit von Straßen vorgestellt und diskutiert. Sie sind bereits im Anhang 1 des im Druck befindlichen Merkblatts für die Ausbildung und Zertifizierung der Sicherheitsauditoren von Straßen (MAZS 2008) aufgenommen. Für die festgestellten Defizite der relevanten Entwurfselemente wurden auf Grundlage der Entwurfsregelwerke jeweils die sicherheitsrelevanten Aussagen und Entwurfslösungen herausgearbeitet und zugeordnet. Im Ergebnis wurde eine Material- und Beispielsammlung erstellt, die in den Schulungsunterlagen zu jedem Grundlagen- und Thematischen Modul auch entsprechende Beispielsequenzen zu jedem Modul beinhaltet. Diese sehr umfangreichen Schulungsunterlagen (Kap. 3) sind dem Bericht als DVD beigefuegt.
In der öffentlichen Berichterstattung und in einschlägigen Gremien ist das Thema "Kleintransporter" immer wieder Gegenstand der Behandlung. Kleintransporter vereinen die Kapazität von kleinen Güterkraftfahrzeugen mit der Flexibilität und Leistungsfähigkeit von Pkw. Zum Führen dieser Fahrzeuge wird dabei lediglich die normale Pkw-Fahrerlaubnis benötigt. Obwohl das Unfallrisiko von Kleintransportern immer noch höher ist als das für Pkw, kann festgestellt werden, dass sich der starke Anstieg der Unfallanzahlen dieser Fahrzeuge trotz weiterhin steigender Bestandszahlen nicht weiter fortgesetzt hat. Mit dem hier durchgeführten Forschungsvorhaben wurde das Ziel verfolgt, die Maßnahmen und Qualifizierungsprogramme zur Erhöhung der Verkehrssicherheit von Kleintransportern in den zurückliegenden Jahren und auch solche Maßnahmen, die zukünftig geplant sind, umfassend zu erheben. Für solche Maßnahmen, die bereits realisiert worden sind, sollte festgestellt werden, inwiefern und in welchem Maße sie Anwendung finden. Die Grundlage des Forschungsvorhabens bildeten neben einer Literaturrecherche insbesondere empirische Untersuchungen. Diese wurden in Form von mündlich-persönlichen Befragungen mit Fahrern, Maßnahmenträgern, Unternehmen, Fahrzeugherstellern und Vermietunternehmen geführt. Insgesamt konnten im Rahmen des Vorhabens 116 Personen befragt werden. Wie die Fahrerbefragung gezeigt hat, verfügen die Befragten im Allgemeinen über keine spezifische Qualifikation in Bezug auf das Führen eines Kleintransporters. Die Ausgangsbasis bildet in aller Regel die Fahrerlaubnis der Klasse B bzw. Klasse 3 (alt). In den vergangenen fünf Jahren hat lediglich jeder zweite Fahrer eine Schulung besucht. Mit einem Anteil von rund 40% sind Übertretungen von Verkehrsvorschriften durch zu schnelles Fahren der häufigste Grund von Beanstandungen. Weitere Defizite wurden in Zusammenhang mit dem Thema Ladungssicherung deutlich. Aus Sicht von Maßnahmenträgern sind die Gründe für die insgesamt geringe Teilnahme von Fahrern an Weiterbildungsmaßnahmen unterschiedlich. So ist festzustellen, dass im Bereich des Kurier-, Express und Post/Paketdienstes aufgrund der engen Einbindung des Fahrpersonals in den logistischen Leistungsprozess häufig keine Freiräume bleiben, dem Fahrpersonal eine Schulung zu ermöglichen. Hinzu kommen wirtschaftliche Zwänge der Branche. Dennoch werden von Unternehmen des Kurier-, Express- und Post/Paketdienstes verschiedene Seminare angeboten und durchgeführt. Es hat sich gezeigt, dass vor allem der Ladungssicherung ein besonderer Stellenwert beigemessen wird. Hier sehen die Unternehmen einen wichtigen Ansatzpunkt für Verbesserungsmaßnahmen, wobei es hier in erster Linie um die Senkung der Schadensquote bezogen auf das Packstück geht, d.h. die Vermeidung bzw. Senkung von Kundenreklamationen, und weniger um den Aspekt der Verkehrssicherheit. Auch im Handwerk sind Maßnahmen zur Verbesserung der Verkehrssicherheit von Kleintransportern in Angriff zu nehmen. Die Fahrzeugsicherheit ist aus Sicht der Hersteller von zentraler Bedeutung. So hat sich die sicherheitsbezogene Ausstattung der Kleintransporter in den vergangenen Jahren stetig verbessert. Kleintransporter verfügen heute bereits serienmäßig über eine Vielzahl an allgemeinen sicherheitsbezogenen Ausstattungskomponenten. In Bezug auf die laderaumbezogene Sicherheitsausstattung werden insbesondere kundenspezifische Wünsche berücksichtigt. Auch die Durchführung von Kundenschulungen ist für die Hersteller ein wichtiges Anliegen. Betrachtet man die Zahlungsbereitschaft der Kunden, so hat sich gezeigt, dass in vielen Fällen die Kunden allerdings nicht bereit sind, für die fahrzeugspezifische Verkehrssicherheit einen höheren Kaufpreis zu entrichten. Ungeachtet dessen wird sich nach Einschätzung der Fahrzeughersteller die Verkehrssicherheit in Zukunft durch neue technische Lösungen weiter erhöhen. Aus Sicht der Vermietunternehmen hat sich die aktive und passive Sicherheitsausstattung der Kleintransporter in den vergangenen 10 Jahren stark verbessert, was sich zum Teil auch auf die Kaufentscheidung der Vermietunternehmen ausgewirkt hat. So sind bspw. bei der Kaufentscheidung neben den Anschaffungskosten durchaus Attribute wie Fahrzeugsicherheit und Langlebigkeit von zunehmender Bedeutung. Als problematisch wird das Privatkundengeschäft eingestuft. Für diesen Personenkreis ist die sicherheitsbezogene Ausstattung von Kleintransportern bislang ohne Bedeutung. Eine Verbesserung der Verkehrssicherheit von Kleintransportern ist in Zukunft nur dann zu erreichen, wenn allen Akteuren bewusst wird, dass das Fahren mit einem Kleintransporter nicht unmittelbar vergleichbar ist mit dem Fahren eines Pkw. Insgesamt ist festzustellen, dass Maßnahmen zur Verbesserung der Verkehrssicherheit von Kleintransportern langfristig anzulegen sind und insbesondere auf Ebene des Fahrpersonals noch ein erheblicher Nachholbedarf zu verzeichnen ist.
Das Ziel der vorliegenden Arbeit war der Vergleich verschiedener Stauendewarnungen hinsichtlich ihrer Effekte auf die Fahrsicherheit. Hierfür wurden im Rahmen einer Fahrsimulatorstudie mit N = 32 Probanden mit Bewegungssystem on-trip Warnungen vor Stauenden auf Autobahnen untersucht. Es wurden in zwei Verkehrsbedingungen ("mit Verkehr" vs. "ohne Verkehr": Stauenden werden mit oder ohne Umgebungsverkehr erreicht) jeweils zwei Stauendearten simuliert: (1) Umgebungsverkehr bremst kurz vor dem Stauende plötzlich ab ("hartes Stauende") bzw. Stauende ist durch die Streckengeometrie nicht einsehbar ("verdecktes Stauende") vs. (2) Umgebungsverkehr reduziert die Geschwindigkeit vor dem Stauende graduell ("weiches Stauende") bzw. Stauende ist einsehbar ("unverdecktes Stauende"). Zudem wurde der erstmalige Zeitpunkt der Warnung ("3.5 km" vs. "1.5 km" vs. "0.3 km" vor Stauende) und die Warnpräzision ("präzise Warnung": Distanz zum Stauende wird angezeigt und regelmäßig aktualisiert vs. "unpräzise Warnung" ohne konkrete Distanzangabe) variiert. Außerdem wurden Stauenden in einer nicht-gewarnten Kontrollfahrt angefahren. Es wurde ein Bewertungskonzept für die Fahrsicherheit entwickelt, anhand dessen die eingeführten Warnkonzepte mittels Indikatoren für Längs- und Querregelung, Ereigniserkennung und Probandenbefragung verglichen werden können: (1) Die Rohdaten verschiedenartiger Indikatoren wurden in einem deskriptiven, graphischen und inferenzstatistischen Vorgehen interpretiert und (2) die so ermittelten Kennwerte wurden in eine integrierte statistische Auswertung mittels TOPSIS (Technique for Order Preference by Similarity to Ideal Solution), das einen standardisierten Vergleich verschiedener Warnalternativen ermöglicht, überführt. Dieses Bewertungskonzept wurde auf die in der Fahrsimulation aufgezeichneten Daten angewendet, so dass für die eingeführten Variationen der Stauendearten (Warnpräzision und Warndistanz) in Abhängigkeit der Verkehrsbedingung eine vergleichende Bewertung der Sicherheitswirkungen ermöglicht wurde. Durch eine ergänzende kritische Einordnung der Ergebnisse und des Versuchsaufbaus dienen die Ergebnisse als Entscheidungsunterstützung bei der Entwicklung und Einführung von Stauendewarnungen.