Sonstige
Refine
Year of publication
- 2015 (43) (remove)
Document Type
- Conference Proceeding (43) (remove)
Keywords
- Deutschland (38)
- Germany (38)
- Conference (37)
- Konferenz (37)
- Accident (19)
- Unfall (19)
- Unfallrekonstruktion (18)
- Accident reconstruction (14)
- injury) (14)
- Schweregrad (Unfall (13)
- Verletzung) (13)
- Severity (accid (12)
- Car (10)
- Pkw (10)
- Injury (9)
- Verletzung (9)
- Digital model (8)
- Numerisches Modell (8)
- Simulation (8)
- Berechnung (7)
- Air pollution (6)
- Calculation (6)
- Decrease (6)
- Driver assistance system (6)
- Fahrerassistenzsystem (6)
- Fatality (6)
- Fußgänger (6)
- Luftverunreinigung (6)
- Nitrogen oxide (6)
- Pedestrian (6)
- Prognose (6)
- Test (6)
- Tödlicher Unfall (6)
- Verminderung (6)
- Versuch (6)
- Cyclist (5)
- Efficiency (5)
- Interview (5)
- Leistungsfähigkeit (allg) (5)
- On the spot accident investigation (5)
- Radfahrer (5)
- Statistics (5)
- Statistik (5)
- Stickoxid (5)
- Untersuchung am Unfallort (5)
- Accident prevention (4)
- Active safety system (4)
- Aktives Sicherheitssystem (4)
- Anfahrversuch (4)
- Estimation (4)
- Fahrzeug (4)
- Nanotechnologie (4)
- Nanotechnology (4)
- Oberfläche (4)
- Oxid (4)
- Oxide (4)
- Reconstruction (accid) (4)
- Surface (4)
- Titan (4)
- Titanium (4)
- Unfallverhütung (4)
- Vehicle (4)
- Antikollisionssystem (3)
- Benutzung (3)
- Beschichtung (3)
- Bewertung (3)
- Coating (3)
- Collision avoidance system (3)
- Collision test (veh) (3)
- Data acquisition (3)
- Datenerfassung (3)
- Evaluation (assessment) (3)
- Finite element method (3)
- Prevention (3)
- Safety (3)
- Sicherheit (3)
- Stadt (3)
- Tunnel (3)
- Urban area (3)
- Use (3)
- Verhütung (3)
- Air bag (restraint system) (2)
- Airbag (2)
- Analyse (math) (2)
- Analysis (math) (2)
- Ballungsgebiet (2)
- Bein (2)
- Biomechanics (2)
- Biomechanik (2)
- Blickfeld (2)
- Camera (2)
- Cause (2)
- Compliance (specif) (2)
- Conurbation (2)
- Crash test (2)
- Database (2)
- Datenbank (2)
- Dauerhaftigkeit (2)
- Driver (2)
- Durability (2)
- Edge (2)
- Eingabedaten (2)
- Electric bicycle (2)
- Elektrofahrrad (2)
- Emission control (2)
- Emissionskontrolle (2)
- Fahrdatenschreiber (2)
- Fahrer (2)
- Field of vision (2)
- Forecast (2)
- Front (2)
- Frontalzusammenstoß (2)
- Geomembran (2)
- Geomembrane (2)
- Head (2)
- Head on collision (2)
- Hospital (2)
- Human factor (2)
- India (2)
- Indien (2)
- Input data (2)
- International (2)
- Japan (2)
- Kamera (2)
- Kopf (2)
- Krankenhaus (2)
- Lebenszyklus (2)
- Leg (human) (2)
- Lkw (2)
- Lorry (2)
- Lärmschutzwand (2)
- Menschlicher Faktor (2)
- Methode der finite Elemente (2)
- Noise barrier (2)
- PVC (2)
- Passive safety system (2)
- Passives Sicherheitssystem (2)
- Polyvinylchloride (2)
- Prüfverfahren (2)
- Risiko (2)
- Risk (2)
- Seite (2)
- Sensor (2)
- Severity (acid (2)
- Ursache (2)
- Vorschrifteneinhaltung (2)
- Abdichtung (1)
- Abdomen (1)
- Ability (road user) (1)
- Acceptability (1)
- Accuracy (1)
- Ageing (1)
- Aggression (psycho) (1)
- Aggression (psychol) (1)
- Air traffic control (1)
- Alte Leute (1)
- Alterung (mater) (1)
- Angle (1)
- Auffahrunfall (1)
- Aufzeichnung (1)
- Austria (1)
- Autobahn (1)
- Back (human) (1)
- Baumusterzulassung (1)
- Behaviour (1)
- Beinahe Unfall (1)
- Belastung (1)
- Bicycle (1)
- Blutkreislauf (1)
- Braking distance (1)
- Bremsweg (1)
- Brustkorb (1)
- Bus (1)
- China (1)
- Circulation (blood) (1)
- Coach (1)
- Compatibility (1)
- Computation (1)
- Contact (tyre (1)
- Cost benefit analysis (1)
- Cycling (1)
- Data transmission (telecom) (1)
- Datenübertragung (Telekom) (1)
- Decision process (1)
- Decke (Straße) (1)
- Deformation (1)
- Delivery vehicle (1)
- Detection (1)
- Detektion (1)
- Digital image processing (1)
- Digitale Bildverarbeitung (1)
- Dreidimensional (1)
- Driving (veh) (1)
- Dynamics (1)
- Dynamik (1)
- EU directive (1)
- EU-Richtlinie (1)
- Einfahrt (1)
- Eins (1)
- Einstellung (psychol) (1)
- Electric vehicle (1)
- Elektrofahrzeug (1)
- Entrance (1)
- Entscheidungsprozess (1)
- Ergonomics (1)
- Ergonomie (1)
- Event data recorder (Road vehicle) (1)
- Event data recorder (road vehicle) (1)
- Expressway (1)
- Fahrgeschicklichkeit (1)
- Fahrrad (1)
- Fahrsimulator (1)
- Fahrzeugführung (1)
- Fahrzeuginnenraum (1)
- Fahrzeugteil (Sicherheit) (1)
- Fehler (1)
- Feinstaub (1)
- Financing (1)
- Finanzierung (1)
- Flugsicherung (1)
- Form (1)
- Forschungsarbeit (1)
- Fracture (bone) (1)
- Frau (1)
- Fugenfüllung (1)
- Geometry (shape) (1)
- Geschwindigkeit (1)
- Harmonisation (1)
- Illness (1)
- Impact (collision) (1)
- Impact test (veh) (1)
- Insasse (1)
- Interior (veh) (1)
- Intersection (1)
- Jahreszeit (1)
- Knochenbruch (1)
- Knotenpunkt (1)
- Kompatibilität (1)
- Kontakt Reifen Straße (1)
- Korea (Süd) (1)
- Krankheit (1)
- Körperstellung (1)
- Lateral (1)
- Lateral collision (1)
- Length (1)
- Lieferfahrzeug (1)
- Life cycle (1)
- Load (1)
- Location (1)
- Länge (1)
- Mathematical model (1)
- Measurement (1)
- Medical aspects (1)
- Medizinische Gesichtspunkte (1)
- Messung (1)
- Method (1)
- Methode der finiten Elemente (1)
- Moped (1)
- Motorcyclist (1)
- Motorrad (1)
- Motorradfahrer (1)
- Nasse Straße (1)
- Near miss (1)
- Netherlands (1)
- Niederlande (1)
- Nordamerika (1)
- North America (1)
- Occupant (veh) (1)
- Official approval (1)
- Old people (1)
- One (1)
- Ort (Position) (1)
- Particulate matter (1)
- Partnerschaft (1)
- Partnership (1)
- Portugal (1)
- Post crash (1)
- Posture (1)
- Pregnancy (1)
- Protective helmet (1)
- Quality assurance (1)
- Qualitätssicherung (1)
- Radfahren (1)
- Reaction (human) (1)
- Reaktionsverhalten (1)
- Rear end collision (1)
- Rechenmodell (1)
- Recording (1)
- Regression analysis (1)
- Regressionsanalyse (1)
- Reifen (1)
- Reifenprofil (1)
- Reisebus (1)
- Republic of Korea (1)
- Research project (1)
- Reversing (veh) (1)
- Risk taking (1)
- Rücken (1)
- Rücksichtslosigkeit (1)
- Rückwärtsfahren (1)
- Safety belt (1)
- Schutzhelm (1)
- Schwangerschaft (1)
- Schweregrad (Unfall, Verletzung) (1)
- Sealing compound (1)
- Season (1)
- Seitlicher Zusammenstoß (1)
- Service life (1)
- Sicherheitsgurt (1)
- Sichtbarkeit (1)
- Simulator (driving) (1)
- Software (1)
- Speed (1)
- Standardisierung (1)
- Stickoxide (1)
- Surfacing (1)
- Telefon (1)
- Telephone (1)
- Test method (1)
- Test procedure (1)
- Thorax (1)
- Three dimensional (1)
- Transport infrastructure (1)
- Trend (stat) (1)
- Two dimensional (1)
- Tyre (1)
- Tyre tread (1)
- Ultraviolet (1)
- Ultraviolett (1)
- Underride prevention (1)
- Unfallfolgemaßnahme (1)
- United Kingdom (1)
- Unterfahrschutz (1)
- Unterleib (1)
- Vehicle safety device (1)
- Vereinigtes Königreich (1)
- Verfahren (1)
- Verformung (1)
- Verhalten (1)
- Verkehrsinfrastruktur (1)
- Visibility (1)
- Visualisation (1)
- Visualisierung (1)
- Vorn (1)
- Vorne (1)
- Wasser (1)
- Water (1)
- Waterproofing (1)
- Weather (1)
- Wet road (1)
- Window (veh) (1)
- Windschutzscheibe (1)
- Winkel (1)
- Wirtschaftlichkeitsrechnung (1)
- Witterung (1)
- Woman (1)
- Zeitreihe (stat) (1)
- Zusammenstoß (1)
- Zweidimensional (1)
- road) (1)
- simulation (1)
- Österreich (1)
Institute
- Sonstige (43) (remove)
The project UR:BAN "Cognitive assistance (KA)" aims at developing future assistance systems providing improved performance in complex city traffic. New state-of-the-art panoramic sensor technologies now allow comprehensive monitoring and evaluation of the vehicle environment. In order to improve protection of vulnerable road users such as pedestrians and cyclists, a particular objective of UR:BAN is the evaluation and prediction of their behaviour and actions. The objective of subproject "WER" is development support by providing quantitative estimates of traffic collisions at the very start and predict potential in terms of optimized accident avoidance and reduction of injury severity. For this purpose an integrated computer simulation toolkit is being devised based on real world accidents (GIDAS as well as video documented accidents), allowing the prediction of potential effectiveness and future benefit of assistance systems in this accident scenario. Subsequently, this toolkit may be used for optimizing the design of implemented assistance systems for improved effectiveness.
Introduction: The method of causation analysis applied under the German accident survey GIDAS, which is based on Accident Causation Analysis System (ACAS) focuses on an on-scene data collection of predominantly directly event-related causation factors which were crucial in the accident emergence as situational resulting events and influences. The paradigm underlying this method refers to the findings of the psychological traffic accident research that most causally relevant features of the system components human, infrastructure and vehicle technology are found directly in the situation shortly before the accident. This justifies the survey method which is conducted directly at the accident (on-scene), shortly after the accident occurrence (in-time) with the detection of human-related causes (in-depth). Human aspects of the situation analysis that interact and influence the risk situations shortly before the collision are reported as errors, lapses, mistakes and failures in ACAS in specific categories and subcategories. Thus methodically ACAS is designed primarily for the collection of accident features on the level of operational action, which certainly leads to valid findings and behavioral causes of accidents. The enhancement by means of Moderating Conditions concerns the pre-crash phase in different levels: strategical, tactical and operational.
The evaluation of the expected benefit of active safety systems or even ideas of future systems is challenging because this has to be done prospectively. Beside acceptance, the predicted real-world benefit of active safety systems is one of the most important and interesting measures. Therefore, appropriate methods should be used that meet the requirements concerning representativeness, robustness and accuracy. The paper presents the development of a methodology for the assessment of current and future vehicle safety systems. The variety of systems requires several tools and methods and thus, a common tool box was created. This toolbox consists of different levels, regarding different aspects like data sources, scenarios, representativeness, measures like pre-crash-simulations, automated crash computation, single-case-analyses or driving simulator studies. Finally, the benefit of the system(s) is calculated, e.g. by using injury risk functions; giving the number of avoided/mitigated accidents, the reduction of injured or killed persons or the decrease of economic costs.
The changed focus in vehicle safety technology from secondary to primary safety systems need to evolve new methods to investigate accidents, high critical, critical and normal driving situations. Current Naturalistic Driving Studies mostly use vehicles that are highly equipped with additional measuring devices, video cameras, recording technology, and sensors. These equipped fleets are very expensive regarding the setup and administration of the study. Due to the great rarity of crashes it is additionally necessary to have a high distribution and a homogeneous distribution of subject groups. At the end all these facts are leading to a very expensive study with a manageable number of data. Smartphones are becoming more and more popular not only for younger people. Contrary to traditional mobile phones they are mostly equipped with sensors for acceleration and yaw rates, GPS modules as well as cameras in high definition resolution. Additionally they have high-performance processors that enable the execution of CPU-intensive tools directly on the phone. The wide distribution of these smartphones enables researchers to get high numbers of users for such studies. The paper shows and demonstrates a software app for smartphones that is able to record different driving situations up to crashes. Therefore all relevant parameter from the sensors, camera and GPS device are saved for a given duration if the event was triggered. The complete configuration is independently adjustable to the relevant driver and all events were sent automatically to the research institute for a further process. Direct after the event, interviews with the driver can be done and important data regarding the event itself are documented. The presentation shows the methodology and gives a demonstration of the working progress as well as first results and examples of the current study. In the discussion the advantages of this method will be discussed and compared with the disadvantages. The paper shows an alternative method to investigate real accident and incident data. This method is thereby highly cost efficient and comparable with existing methods for benefit estimation.
The current Brussels EU Regulation No. 1235/2011, valid from May 30, 2012, has introduced an European Tyre Label with wet grip index G classes from A to G for passenger car tyres C1, light commercial vehicles tyres C2 and heavy truck- and bus tyres C3. Every wet grip class for each vehicle category has a defined band of numerical values for the wet grip index G. The legislated wet grip values G in this EU- Regulation are very low. The measured braking distances and corresponding impact speeds of the test vehicles are showing very critical results. Regulation No. 1235/2011 of the European Parliament and the Council for Type Approval of Vehicles (EU) should be changed in such a way, that for C1-tyres (normal passenger cars tyres) the minimum wet grip index G is 1.25. All C2-tyres (light commercial vehicles tyres) should at least meet a minimum wet grip index of G = 1.1. All C3-tyres (heavy trucks and buses tyres) should at least meet a minimum wet grip index of G = 0.95. Due to the missing lower limits for G in the wet grip class F for C1, C2 and C3 tyres according to Commission Regulation (EU) No. 1235/2011, officially valid from 30 May 2012, a tyre-to-road coefficient of adhesion in the extreme of 0 (zero) is legally permitted. This is an apparent flaw in above cited EU Regulation, which causes a potential danger to the road traffic safety for all motor vehicles in Europe with such tyres. The wet grip class F has to be removed urgently from said EURegulation, since a direct liability of the responsible EU-Commission can not be excluded.
The main focus of the benefit estimation of advanced safety systems with a warning interface by simulation is on the driver. The driver is the only link between the algorithm of the safety system and the vehicle, which makes the setup of a driver model for such simulations very important. This paper describes an approach for the use of a statistical driver model in simulation. It also gives an outlook on further work on this topic. The build-up process of the model suffices with a distribution of reaction times and a distribution of reaction intensities. Both were combined in different scenarios for every driver. Each scenario has then a specific probability to occur. To use the statistical driver model, every accident scene has to be simulated with each driver scenario (combinations of reaction times and intensities). The results of the simulations are then combined regarding the probabilities to occur, which leads to an overall estimated benefit of the specific system. The model works with one or more equipped participants and delivers a range for the benefit of advanced safety systems with warning interfaces.
This paper deals with the determination of test criteria for the durability assessment of polyvinyl chloride (PVC)-based geosynthetic barriers (GBR-P) products in tunnel sealing systems. In the project different products for road tunnel application are investigated by systematic long time storage in hot water using a new test procedure based on SIA V 280 standard (test no. 13) and EN 14415. The objective of this research project is to derive suitable exposure conditions and criteria for a practical testing procedure with regard to service lifetimes of up to 100 years. For that test temperature and time as well as the best suitable test medium have been investigated in a structured way. To verify the results of the new test procedure the material properties of GBR-P samples removed from older road tunnels are investigated. Based on the presented results of the still on-going research program some preliminary conclusions regarding the updating of the German regulations for road tunnel sealing systems (ZTV-ING part 5 section 5 and TL/TP KDB) are given.
Tunnel in Spritzbetonbauweise werden in der Regel mit einem Abdichtungssystem aus Kunststoffdichtungsbahnen (KDB) gegen das anstehende Bergwasser abgedichtet. Die Tunnelabdichtungen aus KDB müssen dabei über die gesamte Nutzungsdauer des Bauwerks von in der Regel 130 Jahren zuverlässig ihre Funktion erfüllen. Ein einfacher Austausch der KDB oder der Einbau einer gleichwertigen Alternative ist in der Regel nicht, oder nur mit erheblichem Aufwand möglich. Bislang existieren national und international keine abgesicherten Prüfkriterien, die eine Bestimmung der Langzeitbeständigkeit von KDB über die geforderte Nutzungsdauer von mindestens 100 Jahren ermöglichen. Im vorliegenden Beitrag werden Untersuchungsergebnisse eines BASt Forschungsprojektes präsentiert, in dem Prüfkriterien für die Abschätzung der Langzeitbeständigkeit von KDB aus PVC-P hergeleitet werden. In diesem Projekt werden verschiedene marktübliche KDB für die Tunnelabdichtung mit einem beschleunigten Prüfverfahren "Lagerung in heißem Wasser" systematisch auf ihr Alterungsverhalten hin untersucht. Das hierfür verwendete Immersionsprüfverfahren wurde neu entwickelt und basiert auf der SIA V 280 (Prüfung Nr. 13) und DIN EN 14415. Ziel der Untersuchungen ist es, die erforderlichen Prüfkriterien zu definieren, die für eine praxisgerechte Abschätzung der Nutzungsdauer von mindestens 100 Jahren erforderlich sind. Hierfür werden beispielsweise die Einlagerungsdauer, die Einlagerungstemperatur und das Prüfmedium strukturiert untersucht. Zum Vergleich der Prüfergebnisse aus dem Immersionsprüfverfahren werden Untersuchungen an ausgebauten KDB Proben aus 2 älteren Straßentunneln herangezogen. Die Ergebnisse des Forschungsvorhabens sollen in die Fortschreibung des nationalen Regelwerks für den Straßentunnelbau (TL/TP KDB) einfließen.
Detailed anthropometric data of pregnant women have been collected and used in the development of a computational model of the pregnant occupant model "Expecting". The model is complete with a finite element uterus and multi-body fetus, which is a novel feature in the models of this kind. The computational pregnant occupant model has been validated and used to simulate a range of impacts. The strains developed in the utero-placental interface are used as the main criteria for fetus safety. Stress distributions due to inertial loading of the fetus on the utero-placental interface play a role on the strain levels. Inclusion of fetus model is shown to significantly affect the strain levels in the utero-placental interface. This series of studies has led to the design of seatbelt features specifically for the pregnant women to enable them use the seatbelt correctly and comfortably.
Verschiedene Maßnahmen zur Verbesserung der Luftqualität in Städten waren bisher bei der Verminderung von Stickoxiden nur bedingt erfolgreich. Interessant ist, ob der Einsatz der Photokatalyse hier weiterhelfen kann. Photokatalytische Anwendungen wurden schon in einigen Pilotstudien untersucht, zum Beispiel an Straßen beziehungsweise Modell-Canyons sowie in Tunneln. Teilweise wurden international sehr positive Ergebnisse erzielt, geichzeitig liegen aus anderen internationalen Projekten Ergebnisse unterhalb der Messgenauigkeit vor. Die vorgestellten Ergebnisse werden anhand verschiedener Variablen betrachtet und die erwartbare Atmosphärenrelevanz diskutiert. Zusammengefasst wird, dass basierend auf bekannten Feldmessungen für die Photokatalyse eine mittlere NOx-Reduktion von nur wenigen Prozent (in Hauptstraßenschluchten) zu erwarten ist. Dieses Potenzial muss mit anderen Maßnahmen verglichen werden (Kosten/Nutzenanalyse). Materialien müssen vor ihrem Einsatz in der Atmosphäre sorgfältig auf ihre Aktivität untersucht werden. Erfüllen die Oberflächen die Voraussetzungen, um als aktiv eingestuft zu werden, ist ihr Einsatz zur Luftreinhaltung klar zu empfehlen.
While it is important to track trends in the number of road accidents in different countries using national statistics, there is a need for data with more detailed information, so called in-depth accident data. For this reason, several accident data projects emerged worldwide in recent years. However, also different data standards were established and so comparative analysis of international in-depth data has been very hard to conduct, so far. This is why the project iGLAD (Initiative for the Global Harmonization of Accident Data) was established and created the prerequisites for building up a standardized dataset out of the common denominator of different in-depth accident databases from Europe, USA and Asia. In the first phase, the project received funding from ACEA to compile an initial database. To accomplish this, a suitable data scheme has been defined, a pilot study has been conducted as proof of concept and the recoding of the first common data base has been initiated. Also, to prepare the project for its self-supporting continuation in the next years, a business model has been developed. This paper reports the history and status of the project, the current challenges and the creation of a capable consortium to maintain the data. In mid-2014, the initial database containing 1550 cases from 10 different countries will be completed and a first detailed view on this data will be possible.
Vorgestellt werden Ergebnisse aus der Untersuchung "Vergleich verschiedener Modellierungsprogramme zur Berechnung von Luftschadstoffen". Die Untersuchung wurde begleitend zu der Pilotstudie "NO2-Reduktion an Ti02-dotierten Lärmschutzwänden (LSW) an der A1" durchgeführt. Projektziel war der Vergleich von drei Ausbreitungsmodellen sowie die Auswahl eines geeigneten Modells für ein zu entwickelndes Online-Monitoring-System. Es wurde festgestellt, dass sich die Modellergebnisse infolge der Umsetzung kleinräumiger Details unterscheiden sowie dass alle Modelle lediglich geringe NOx-Minderungen in Folge der katalytischen Oberflächenbeschichtung anzeigen. In den numerischen Modellen wird die photokatalytische Wirkung der Ti02-beschichteten Lärmschutzwand über einen Depositionsprozess berücksichtigt. Unter Berücksichtigung der Hintergrundbelastung und der NOx-NO2-Umwandlung würde sich die Wirkung des Katalysators im Maximum auf weniger reduzieren. Die Messungen zeigten keine eindeutige Wirkung bezüglich der Immissionskonzentrationen im Bereich der beschichteten beziehungsweise unbeschichteten LSW an.
Es werden erste Ergebnisse des von der Bundesanstalt für Straßenwesen (BASt) geförderten Forschungsprojekts "Hauptstudie zur Wirksamkeit von Tunnelwänden als Träger photokatalytischer Oberflächen" (FE 9.0184/2011/ARB) vorgestellt. Ziel war die Erarbeitung von technischen Lösungen zur Stickoxidreduktion an einem Tunnelstandort durch die Konzeptionierung und den Bau abgeschlossener photokatalytischer Reaktoren (Tunnelkassetten) sowie deren Validierung im Tunnel "Rudower Höhe" an der Bundesautobahn A113 in Berlin. Dabei wird künstliches UV-Licht als Energiequelle für den Schadstoffabbau eingesetzt. Es wird speziell über die Modellierungen berichtet, mit Hilfe derer die Tunnelkassetten sowohl strömungstechnisch als auch in Hinblick auf den photokatalytischen Abbauwirkungsgrad optimiert wurden.
Mit Fokus auf Nordrhein-Westfalen (NRW) wird das urbane NO2-Problem umrissen. Um die Jahresgrenzwerte einzuhalten, sind beispielsweise in allen Straßenschluchten in NRW Reduktionen nötig. Die Europäische Kommission hat gegen mehrere Mitgliedsstaaten, darunter Deutschland, Vertragsverletzungsverfahren wegen der Überschreitung von NO2-Grenzwerten eröffnet. Dargestellt werden die Langzeittrends bezüglich der gemessenen Abnahme bei der Stickoxidbelastung. Potenzielle Maßnahmen können hinsichtlich ihrer möglichen Wirkungen durch den Einsatz von Modellen abgeschätzt werden, zum Beispiel Umweltzonen, Fahrverbote, Elektrofahrzeuge. Die Ergebnisse der Messungen und Modellrechnungen werden dargestellt und kritisch beleuchtet. Als Fazit ergibt sich, dass das urbane NO2-Problem nicht einfach zu lösen ist, Minderungen der NOx-Emissionen spiegeln sich nicht in der gleichen Größenordnung in der Abnahme der NO2-Belastung wieder. Bei zusätzlich wirksamen Maßnahmen wie beispielsweise einem höheren Anteil von Elektrofahrzeugen fehlt die (schnelle) praktische Umsetzbarkeit. Eine Kombination aus lokalen, regionalen und europaweiten Maßnahmen ist nötig, um das Problem zu lösen.
Ausgehend von den rechtlichen Grundlagen für die Luftreinhaltung sowie den Grenzwertfestlegungen für Feinstaub (PM10) sowie Stickoxide (NO2) wird auf die heutige Luftqualität in Städten mit Schwerpunkt Stuttgart eingegangen. Dargelegt werden die festgestellten Überschreitungen bei den Grenzwerten für PM10 und NO2. Eingegangen wird auf die Maßnahmen zur Reduzierung der Luftbelastung in Stuttgart und die Wirkungen in Bezug auf die Senkung der Grenzwert-Übersschreitungen beziehungsweise Jahresmittelwerte von PM10 und NO2 an den Hotspot-Stationen "Am Neckartor" und "Hohenheimer Straße". Abschließend wird ein perspektivischer Ausblick gegeben: obwohl die Luftsituation in den Städten kontinuierlich besser geworden ist, gibt es an stark befahrenen städtischen Straßen weiterhin Grenzwertüberschreitungen. Die EU-Vertragsverletzungsverfahren machen weitere Maßnahmen notwendig. Die Städte brauchen praxiserprobte Maßnahmen und keine langfristigen, kostspieligen Pilotversuche mit unsicherem Ausgang.
Vorgestellt werden Vorgehensweise, Datenaufbereitung, Modellaufbau und Ergebnisse des BASt-Projekts "Numerische Simulation der Stickoxidminderung durch photokatalytische Oberflächen an Verkehrswegen". Die Vorteile des Konzepts liegen in der Berücksichtigung von Zeitreihen (Eingangsdaten, Ausbreitungsrechnung) und in der Tatsache, dass die Depositionsgeschwindigkeit als zeitlich variable Eingangsgröße bei der Modellierung berücksichtigt wurde. Die Ergebnisse liegen entsprechend als Zeitreihen vor (Jahres- oder Tagesgänge können untersucht werden). Es ergab sich eine Minderung der NO2-Belastung um maximal knapp 1.5% im Nahbereich der Lärmschutzwand. Wesentlicher Faktor bei der Wirksamkeit photokatalytischer Oberflächen ist die Interaktion zwischen Gesamtbelastung und Depositionsgeschwindigkeit im Tagesverlauf.
The declining trend since 1991 in the number of killed people was broken in 2011 when overall 4 009 people died in traffic accidents in Germany. The question arises if there is a stagnating trend of fatalities in Germany in future? By breaking down the accidents with casualties towards a monthly view one can see a decreasing trend of fatalities in the warmer months especially since 2009. When comparing against winter months higher deviations are observed. In December 2011 an increase of 191 traffic deaths were registered (181 in 2010 compared to 372 in 2011). Further analyses of different accident influences were evaluated and their possibility of drastic change from one year to the other was determined. As seen weather- and environmental conditions are one of the major contributing factors and are one of the causes for the increased number of fatalities. To support the underlying assumption a model had been created to calculate the number of traffic deaths on a daily basis approach. As an input, road conditions projected through weather parameters and also different driving behaviors on weekdays or holidays were used. As a result, estimates of daily fatality with up to 75% precision can be achieved out of the 2009, 2010 and 2011 data. Further on it shows that weather and street conditions have a high influence on the overall resulting number of traffic accidents with casualties, and especially to the number of fatalities. Hence it is estimated that approximately 3 300 people were killed in traffic accidents in Germany in 2013 which would be again a reduction of another 13% compared to 2012. Therefore an answer to the question will be that the decreasing trend in traffic fatalities in Germany somehow is not broken when environmental conditions are included in national statistics. Their effects will become more visible in future accident statistics and it is estimated variances of 5% to 8% of the annual number of traffic fatalities in Germany will be seen.
The Traffic Accident Research Institute at University of Technology Dresden investigates about 1,000 accidents annually in the area around and in Dresden. These datasets have been summarized and evaluated in the GIDAS (German Accident In-Depth Study) project for 13 years. During the project it became apparent that the specific traffic situation of a covert exit of a passenger car and an intersecting two-wheeler involves a high risk potential. This critical situation develops in a large part due to the lack of visibility between the driver and the intersecting bike. In this paper the accident avoidance potential of front camera systems with lateral field of view, which allows the driver to have an indirect sight into the crossing street area will be presented.
Injury severity of e.g. pedestrians or bikers after crashes with cars that are reversing is almost unknown. However, crash victims of these injuries can frequently be seen in emergency departments and account for a large amount of patients every year. The objective of this study is to analyze injury severity of patients that were crashed into by reversing cars. The Hannover Medical School local accident research unit prospectively documented 43,000 road traffic accidents including 234 crashes involving reversing cars. Injury severity including the abbreviated injury scale (AIS) and the maximum abbreviated injury scale (MAIS) was analyzed as well as the location of the accident. As a result 234 accidents were included into this study. Pedestrians were injured in 141 crashes followed by 70 accidents involving bikers. The mean age of all crash victims was 57 -± 23 years. Most injuries took place on straight stretches (n = 81) as well as parking areas (n = 59), entries (n = 36) or crossroads (n = 24). The AIS of the lower extremities was highest followed by the upper extremities. The AIS of the neck was lowest. The mean MAIS was 1.3 -± 0.6. The paper concludes that the lower extremities show the highest risk to become injured during accidents with reversing cars. However, the risk of severe injuries is likely low.
This study aimed at developing an injury estimation algorithm for AACN technologies for Germany and compared them to findings based on Japanese data. The data to build and to verify the algorithm was obtained from the German in-depth Accident Database (GIDAS) and split into a training and a validation dataset. Significant input variables and the generalized linear regression model to predict severe injuries (ISS>15) were selected to maximize area under the receiver operating characteristic curve (AUC). Probit regression with the input parameter multiple impact, delta v, seatbelt use and impact direction gave the largest AUC of 0.91. Sensitivity of the algorithm was validated at 90% and specificity at 76% for an injury risk threshold of 2%. It appears that no major differences between Japan and Germany exist for injury estimation based on delta v and impact direction. However, far side impact and multiple crash events appear to be associated with a larger risk increase in the German data.