Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
- Buch (Monographie) (427)
- Konferenzveröffentlichung (336)
- Bericht (23)
- Arbeitspapier (13)
Volltext vorhanden
- ja (799) (entfernen)
Schlagworte
- Germany (536)
- Deutschland (534)
- Forschungsbericht (387)
- Research report (387)
- Conference (306)
- Konferenz (302)
- Unfall (180)
- Accident (179)
- Safety (148)
- Sicherheit (145)
Each year the traffic accident research teams in Dresden and Hanover provide an in-depth investigation of approximately two thousand accidents, aggregated in the GIDAS database. To accomplish a comprehensive review of each traffic accident recorded, a sensible and thorough encoding of suffered injuries is indispensable. The Abbreviated Injury Scale by AAAM offers a valuable and handy solution to achieve this goal. However, there were a few difficulties in the use of the AIS that came up in the past, which let to necessary improvements for the utilization of the AIS 2005 for GIDAS.
In the last years various new driver information and driver assistance systems made their way into modern vehicles and there are yet countless systems underway. However, expenses for both, the development and the construction of these systems are tremendous. Therefore the interest of evaluating systems keeps growing steadily, not only regarding the results of systems developed in the last years but also regarding system ideas. Only if at least a rough benefit estimation is given, the industry can decide which development should be supported. However, there is still a lack of transparency of possible and useful methods for these kinds of estimations. These were analyses and structured in this study.
The national accident statistics demonstrate that the situation of passenger car side impacts is dominated by car to car accidents. Car side to pole impacts are relatively infrequent events. However the importance of car side to pole impacts is significantly increasing with fatal and seriously injured occupants. For the present study the German in-depth database GIDAS (German In-Depth-Accident Study) and the UK based database CCIS (Co-operative Crash Injury Study) were used. Two approaches were undertaken to better understand the scenario of car to pole impacts. The first part is a statistical analysis of passenger car side to pole impacts to describe the characteristics and their importance relevant to other types of impact and to get further knowledge about the main factors influencing the accident outcome. The second part contains a case by case review on passenger cars first registered 1998 onwards to further investigate this type of impact including regression analysis to assess the relationship between injury severity and pole impact relevant factors.
In an on-going project since 2005, ADAC has been analyzing accidents documented by the ADAC air rescue service. The knowledge derived from real-life accidents serves as a basis for new test configurations and assessment criteria. In 2007, ADAC began looking into the feasibility of international data collection. The idea of Global Accident Prevention was born. Three European partner clubs have begun pioneering the project (ÖAMTC, ANWB, and RACC). The aim is to set up an international accident research network to provide a steady stream of information on road accidents. The FIA Foundation supports ADAC in developing and coordinating this initiative.
One goal of the assessment of the crashworthiness of passenger cars is to characterize the potential of injury outcome to occupants of cars involved in an accident. This can be achieved by the help of an index that puts the number of injured occupants of passenger cars in relation to the number of cars involved in an accident. As a consequence, this index decreases with a lower potential of injury and rises with a higher number of injuries while assuming a fixed number of accidents. Another index is introduced that uses an economical weighting of each injury level. The consequential injury costs are calculated using the average economical costs for lightly, severely and fatally injured persons. The calculation of the safety indices is based on an anonymized sample of accident data provided by the Federal Statistical Office. An index of Mercedes passenger car drivers depending on the year of registration between 1991 and 2006 is compared to the index of drivers of cars of other makes within the same range of registration years.
A change emerges in hospital landscape due to health political measures, which in consequence also influences the pre-clinical medical care of emergencies. The main focus of this study was to gather information about emergency medical care after traffic accidents on the basis of data of Bavarian emergency medical services. In Bavaria, in 2006 it was necessary to call an emergency doctor in the case of 14.261 traffic accidents. Predominantly the patients were provided by land-based life saving appliances, air rescue services were only applied in 19.1 % of the cases. 47.6 % of patients being involved in a traffic accident were transported into a primary health care hospital. A prehospital interval of more than 60 minutes was calculated in 20 % of emergency care. 96.2 % of the patients were transported to hospitals of tertiary or maximum supply by air rescue services. The life saving appliances" readiness for action is however restricted to daylight. A further limitation appeared for routine office hours in hospitals: Only 36.7 % of accidents occurred in this time frame. An increase of hospitalizations in clinics of maximum supply appeared from 2002 until 2006 while simultaneously the prehospital period was extended. To assure a sufficient medical care of seriously injured persons further on, a fulltime and area-wide expostulation of efficient facilities is necessary. For this purpose it is necessary to establish regional trauma networks as well as emergency medical service at night time. Beyond that, a cost efficient compensation of the structural, personnel and logistic expenses has to be assured.
While many medical studies have dealt with the incidence, nature and treatment of polytrauma the injury-causing accident mechanisms are rarely discussed in detail, mostly due to the lack of documentation of the technical aspects. The present prospective study was started in late 2007 and collects data from traffic accidents with most severely injured in six south- German counties and two larger cities for the duration of one year. It is aimed at identifying and documenting all polytrauma cases (ISS ≥ 16) caused by traffic accidents and their crash circumstances. The data collection is based on an interdisciplinary concept to include both the police, emergency dispatch centers, hospitals and fire departments in the region and is completely anonymous. Potentially relevant cases where an emergency physician was called to the scene of a traffic accident are provided by the dispatch center. All three hospitals in the region suited for the treatment of polytraumatised patients record injuries, major diagnostic and surgery data. Data and images from the accident scene are provided by the police and by fire departments. The latter provide information which is usually not available from the police, like deployed airbags, vehicle extrication measures and detailed views of car interiors. The main objective of the study is to determine the structure of road users who sustain a polytrauma, their crash opponents and the injury patterns found in relation to the collision configuration and the protection by seat belts, air bags and other devices. With detailed documentation of vehicle damage and extrication measures the study is also intended to support the development of injury predictors for pre-hospital treatment and provide field data regarding further improvement of technical rescue.
The Centre for Automotive Safety Research (formerly the Road Accident Research Unit) at the University of Adelaide in South Australia has a history of in-depth crash investigation going back to the 1970s. In recent years, our focus has been on studying factors that contribute to road crashes, with an emphasis on the role of road infrastructure. Our method involves crash notification by the South Australian Ambulance Service and detailed investigation of the crash scene usually before the crash-involved vehicles have been moved. This at-scene data collection is supplemented with police crash reports, Coroner- reports including autopsy findings for fatal crashes, case notes from hospitals for all injured persons, structured interviews with crash participants and witnesses, and computerised reconstruction of the events of the crash. One of the most notable research findings to emerge from our in-depth work has been the relationship between travelling speed and the risk of crash involvement. By comparing the calculated free speeds of crash-involved vehicles (cases) with the measured speeds of non-crash-involved vehicles travelling on the same roads at the same time of day (controls), we were able to establish that an exponential relationship exists between travelling speed and the likelihood of involvement in a casualty crash. This was the case for both metropolitan and rural areas. This research prompted the reduction of some speed limits in Australia, which has resulted in notable decreases in crash numbers. Another finding of interest in our recent investigation of 298 mostly daytime crashes in metropolitan Adelaide was that medical conditions make a sizeable contribution to the occurrence of road crashes. We found that almost half of the drivers, riders and pedestrians involved in the collisions had at least one pre-existing medical condition, and half of these individuals had two or more such conditions. We found that a medical condition was the direct causal factor in 13% of the casualty crashes investigated and accounted for 23% of all hospital admission or fatal crash outcomes. A follow-up study of all hospital admissions for road crashes in Adelaide is now going ahead to look further at this problem. The paper also describes studies looking specifically at pedestrian crashes. These include studies of the relationship between travelling speed and the risk of a fatal pedestrian crash, and studies utilising real crash data to validate headforms and test dummies used in the assessment of the safety of new vehicles in the event of a collision with a pedestrian.
The aim of this study is to investigate the differences in car occupant injury severity recorded in AIS 2005 compared to AIS 1990 and to outline the likely effects on future data analysis findings. Occupant injury data in the UK Cooperative Crash Injury Study Database (CCIS) were coded for the period February 2006 to November 2007 using both AIS 1990 and AIS 2005. Data for 1,994 occupants with over 6000 coded injuries were reviewed at the AIS and MAIS level of severities and body regions to determine changes between the two coding methodologies. Overall there was an apparent general trend for fewer injuries to be coded at the AIS 4+ severity and more injuries to be coded at the AIS 2 severity. When these injury trends were reviewed in more detail it was found that the body regions which contributed the most to these changes in severity were the head, thorax and extremities. This is one of the first studies to examine the implications for large databases when changing to an updated method for coding injuries.
Automotive Engineering, Mechanical Engineering and TechnologyrnAbstract: The degrees of injury severity, as a rule injuries scaled by AIS of specific regions of the human body, investigated out of road traffic accidents correspond to the body-specific loading values, which are found out with the aid of experimental or mathematical simulation of crash tests with motor vehicles or with sled tests. The coherence between the injured human being on the one hand and the physical and the theoretical model respectively on the other hand is established by the risk function, which describes the probability of degrees of injury severity in dependence on the protection criteria. Due to the different physical characteristics in the simulation, e.g. accelerations, forces, compressions and their velocity, the compilation of these quantities, comparable to the MAIS, the maximal occurred single AIS obtained in accident analysis is much more difficult in the simulation than in the accident occurrence. Therefore it is obvious to normalize the loading values gained out of simulation and to summarise them to an entire value in a suitable manner, the safety index.rn
The fact that ADAC Air Rescue handles approximately 4,000 road accident missions every year gave rise to set up an accident research programme for which ADAC Air Rescue provides its data. This data is of initial informational quality and will be supplemented by data from the police, experts, fire brigades as well as hospitals and forensic institutes. Although the number of cases is still rather low, certain tendencies can be identified. The causes for most accidents occur when joining or intersecting traffic, followed by speeding in road bends and tailgating. Many accidents involve HGV rear end collisions, often causing serious injuries, considerable damage and technical problems for the rescue operations. With regard to the various impact types, it has become obvious that most of the extremely serious injuries are inflicted during a passenger car side impact. In addition, access to and removal of trapped passengers is becoming more and more complicated, partly due to the increasing use of high-strength materials, and rescue operations tend to be more time consuming.
Bicyclists are minimally or unprotected road users. Their vulnerability results in a high injury risk despite their relatively low own speed. However, the actual injury situation of bicyclists has not been investigated very well so far. The purpose of this study was to analyze the actual injury situation of bicyclists in Germany to create a basis for effective preventive measures. Technical and medical data were prospectively collected shortly after the accident at the accident scenes and medical institutions providing care for the injured. Data of injured bicyclists from 1985 to 2003 were analyzed for the following parameters: collision opponent, collision type, collision speed (km/h), Abbreviated Injury Scale (AIS), Maximum AIS (MAIS), incidence of polytrauma (Injury Severity Score >16), incidence of death (death before end of first hospital stay). 4,264 injured bicyclists were included. 55% were male and 45% female. The age was grouped to preschool age in 0.9%, 6 to 12 years in 10.8%, 13 to 17 years in 10.4%, 18 to 64 years in 64.7%, and over 64 years in 13.2%. The MAIS was 1 in 78.8%, 2 in 17.0%, 3 in 3.0%, 4 in 0.6%, 5 in 0.4%, and 6 in 0.2%. The incidence of polytrauma was 0.9%, and the incidence of death was 0.5%. The incidence of injuries to different body regions was as follows: head, 47.8%; neck, 5.2%, thorax, 21%; upper extremities, 46.3%; abdomen, 5.8%; pelvis, 11.5%, lower extremities, 62.1%. The accident location was urban in 95.2%, and rural in 4.8%. The accidents happened during daylight in 82.4%, during night in 12.2%, and during dawn/dusk in 5.3%. The road situation was as follows: straight, 27.3%; bend, 3.0%; junction, 32.0%; crossing, 26.4%; gate, 5.9%; others, 5.4%. The collision opponents were cars in 65.8%, trucks in 7.2%, bicycles in 7.4%, standing objects in 8.8%, multiple objects in 4.3%, and others in 6.5%. The collision speed was grouped <31 in 77.9%, 31-50 in 4.9%, 51-70 in 3.7%, and >70 in 1.5%. The helmet use rate was 1.5%. 68% of the registered head injuries were located in the effective helmet protection area. In bicyclists, head and extremities are at high risk for injuries. The helmet use rate is unsatisfactorily low. Remarkably, two thirds of the head injuries could have been prevented by helmets. Accidents are concentrated to crossings, junctions and gates. A significant lower mean injury severity was observed in victims using separate bicycle lanes. These results do strongly support the extension or addition of bicycle lanes and their consequent use. However, the lanes are frequently interrupted at crossings and junctions. This emphasizes also the important endangering of bicyclists coming from crossings, junctions and gates, i.e. all situations in which contact of bicyclists to motorized vehicles is possible. Redesigning junctions and bicycle traffic lanes to minimize the possibility of this dangerous contact would be preventive measures. A more consequent helmet use and use and an extension of bicycle paths for a better separation of bicyclists and motorized vehicle would be simple but very effective preventive measures.
In recent years special attention has been paid to reducing the number of fatalities resulting from road traffic accidents. The ambitious target to cut in half the number of road users who are killed each year by 2010 compared with the 2001 figures, as set out in the European White Paper "European Transport Policy for 2010: Time to Decide" implies a general approach covering all kinds of road users. Much has been achieved, e.g. in relation to the safety of car passengers and pedestrians but PTW accidents still represent a significant proportion of fatal road accidents. More than 6,000 motorcyclists die annually on European roads which amounts to 16% of the EU-15 road fatalities. The European Commission therefore launched in 2004 a Sub- Project dealing with motorcycle accidents within an Integrated Project called APROSYS (Advanced PROtection SYStems) forming part of the 6th Framework Programme. In a first step, the combined national statistical data collections of Germany, Italy, the Netherlands and Spain were analysed. Amongst other things parameters like accident location, road conditions, road alignment and injury severity have been explored. The main focus of the analysis was on serious and fatal motorcycle accidents and the results showed similar trends in all four countries. From these results 7 accident scenarios were selected for further investigation via such in-depth databases as the DEKRA database, the GIDAS 2002 database, the COST 327 database and the Dutch element of the MAIDS database. Three tasks, namely the study of PTW collisions with passenger cars, PTW accidents involving road infrastructure features, and motorcyclist protective devices have been assessed and these will concentrate inter alia on accident causes, rider kinematics and injury patterns. A detailed literature review together with the findings of the in-depths database analysis is presented in the paper. Conclusions are drawn and the further stages of the project are highlighted.
Empirical vehicle crashworthiness studies are usually based on national or in-depth traffic accident surveys: Data on accident-involved cars/drivers are analysed in order to quantify the chance of driver injury and to assess certain risk factors like car make and model. As the cars/drivers involved in the same accident form a "cluster", where the size of the cluster equals the number of accident-involved parties, traffic accident survey data are typical multi-level data with accidents as first-level or primary and cars/drivers as secondlevel or secondary units (car occupants in general are to be considered as third level units). Consequently, appropriate statistical multi-level models are to be used for driver injury risk estimation purposes as these models properly account for the cluster structure of traffic accident survey data. In recent years various types of regression models for clustered data have been developed in the statistical sciences. This paper presents multi-level statistical models, which are generally applicable for vehicle crashworthiness assessment in the sense that data on single and multiple car crashes can be analysed simultaneously. As a special case of multi-level modelling driver injury risk estimation based on paired-by-collision car/driver data is considered. It is demonstrated that assessment results may be seriously biased, if the cluster structure inherent in traffic accident survey data is erroneously ignored in the data analysis stage.
Internationally, the need is expressed for harmonized traffic accident data collection (PSN, PENDANT, etc.). Together with this effort of harmonization, traffic accident investigation moves more and more in the direction of accident causation. As current methods only partly address these needs, a new method was set up. The main characteristics of this method are: • Accident/injury causation (associated) factors can objectively be identified and quantified, by comparison with exposure information from a normal population. • All relevant accident and exposure data can be included: human-, vehicle-, and environmental related data for the pre-crash, crash and postcrash situation (the so-called Haddon matrix). The level of detail can be chosen depending on interest and/or budget, which makes the method very flexible. In this paper the accident collection and control group method are presented, including some of the achieved results from a pilot study on 30 truck accidents and 30 control locations. The data were analyzed by using cross-tabulations and classification-tree analysis. The method proved useful for the identification of statistically significant causational aspects.
During the last 5 years, the number of cars fitted with side airbags has dramatically increased. They are now standard equipment, even on many smaller cars or less luxurious vehicles. While some side airbags offer thoracic protection alone, there are those that combine thoracic and head protection (of which most deploy from the seat). Other systems employ separate airbags for head and thorax protection, which are designed to be effective noticeably in a crash against a pole. This paper proposes an evaluation of the effectiveness of side airbags in preventing thoracic injuries to passenger car occupants involved in side crashes. First, the target population (who can take benefit of side airbag deployment and in what circumstances) is defined. Side airbags can be especially effective in cases of impacts on the door with intrusion at a certain impact speed. Then, an example case of a side impact with side airbag deployment is given were side airbag deployment is thought to have had a positive effect on injury outcome. A further case is presented where the impact configuration is likely to have reduced the effect of side airbag deployment on injury outcome. Finally, the estimation of side airbag effectiveness (in terms of additional occupant protection brought exclusively by the airbag) is proposed by comparing injury risk sustained by occupants in (more or less) similar cars (fitted or non fitted with airbags) because, during these years, car structure, and side airbag conception have considerably evolved. In-depth accident data from France, the UK and Germany has been collected. Out of 2,035 side impact accident cases available in the databases, we selected 435 occupants of passenger cars (built from 1998 onwards) involved in an injury accident between year 1998 and year 2004 for EES (Energy Equivalent Speed) values between 20km/h and 50km/h. The occupants, belted or not, were sat on the struck side, whatever the obstacle and type of accidents (intersection, loss of control, etc.). For multiple impact crashes, the side impact is assumed to be the more severe one. Passenger cars were fitted with (96) or without (339) side airbags. Most of the potential risk explanatory variables were correctly and reliably reported in the databases (velocity " impact zone " impact angle " occupant characteristics, etc.). The analysis compared injury risks for different levels of EES and different types of side airbags. A logistic regression model was also computed with injury variables (such as thoracic AIS 2+ or AIS 3+) as the dependant variable and other variables (including airbag type and EES) as explanatory injury risk factors. Results revealed statistically non-significant reductions in thoracic AIS 2+ and AIS 3+ injury risk in side airbag equipped cars in the impact violence range selected (odds ratio between 0.84 and 0.98 depending on types of airbags). The results are discussed. The non-significance is assumed to be due to a low number of cases. Statistical analysis for head injuries was not possible due to the low number of accident cases with passenger cars fitted with head airbags in the databases. Moreover, the discrepancies between the data coming from different countries (especially calculation of EES) might have introduced instability in the analysis.
In Germany, in-depth accident investigations are carried out in the Hannover area since 1973. In 1999 a second region was added with surveys in Dresden and the surrounding area. Internationally, the acronym GIDAS (German In-Depth Accident Study) is commonly used for these surveys. Compared to many other countries, the sample sizes of the GIDAS surveys are much larger. The goal is to collect 1.000 accidents involving personal injuries per year and region. Data collection takes place by using a sampling procedure, which can be interpreted as a two-stage process with time intervals as primary units and accidents as secondary units. An important question is, to what extend these samples are representative for the target population from which they are drawn. Analyses show, for example, that accidents with persons killed or seriously injured are overrepresented in the samples compared to accidents with slightly injured persons. This means, that these data are subject to biases due to uncontrolled variation of sample inclusion probability. Therefore, appropriate weighting and expansion methods have to be applied in order to adjust or correct for these biases. The contribution describes the statistical and methodological principles underlying the GIDAS surveys with respect to sampling procedure, data collection and expansion. In addition, some suggestions regarding potential improvements of study design are made from a methodological point of view.
Annually within the European Union, there are over 50,000 road accident fatalities and 2 million other casualties, of which the majority are either the occupants of cars or other road users in collision with a car. The European Commission now has competency for vehicle-based injury countermeasures through the Whole Vehicle Type Approval system. As a result, the Commission has recognised that casualty reduction strategies must be based on a full understanding of the real-world need under European conditions and that the effectiveness of vehicle countermeasures must be properly evaluated. The PENDANT study commenced in January 2003 in order to explore the possibility of developing a co-ordinated set of targeted, in-depth crash data resources to support European Union vehicle and road safety policy. Three main work activity areas (Work Packages) commenced to provide these resources. This paper describes some of the outcomes of Work Package 2 (WP2, In-depth Crash Investigations and Data Analysis). In WP2, some 1,100 investigations of crashes involving injured car occupants were conducted in eight EU countries to a common protocol based on that developed in the STAIRS programme. This paper describes the purposes, methodology and results of WP2. It is expected that the results will be used as a co-ordinated system to inform European vehicle safety policy in a systematic, integrated manner. Furthermore, the results of the data analyses will be exploited further to provide new directions to develop injury countermeasures and regulations.
Validation of human pedestrian models using laboratory data as well as accident reconstruction
(2007)
Human pedestrian models have been developed and improved continually. This paper shows the latest stage in development and validation of the multibody pedestrian model released with MADYMO. The biofidelity of the multibody pedestrian model has been verified using a range of full pedestrian-vehicle impact tests with a large range in body sizes (16 male, 2 female, standing height 160-192cm, weight 53.5-90kg). The simulation results were objectively correlated to experimental data. Overall, the model predicted the measured response well. In particular the head impact locations were accurately predicted, indicated by global correlation scores over 90%. The correlation score for the bumper forces and accelerations of various body parts was lower (47-64%), which was largely attributed to the limited information available on the vehicle contact characteristics (stiffness, damping, deformation). Also, the effects of the large range in published leg fracture tolerances on the predicted risk to leg fracture by the pedestrian model were evaluated and compared with experimental results. The validated mid-size male model was scaled to a range of body sizes, including children and a female. Typical applications for the pedestrian models are trend studies to evaluate vehicle front ends and accident reconstructions. Results obtained in several studies show that the pedestrian models match pedestrian throw distances and impact locations observed in real accidents. Larger sets of well documented cases can be used to further validate the models especially for specific populations as for instance children. In addition, these cases will be needed to evaluate the injury predictive capability of human models. Ongoing developments include a so-called facet pedestrian model with a more accurate geometry description and a more humanlike spine and neck and a full FE model allowing more detailed injury analysis.
While the number of fatal accidents is diminishing every year, there is still a need of improvement and action to prevent these deaths. Basis for this purpose has to be an analysis about the factors influencing the car crash mortality. There are various studies describing the univariate influence of several factors, but crash scenarios are too complex to be described by a single variable. The multivariate analysis respects the interference of the variables and gets so to more detailed and representative results. This multivariate analysis is based on about 2,600 cases (the data have been collected by the accident research units Hannover and Dresden (during the years 1999-2003). This paper presents a multivariate model (containing ten different variables) which detects 93% of these cases properly. This means it detects the cases as truly survived and truly death.
The need for improved EU level accident information and data was identified in the EU White Paper on Transport Policy (2001)1 and detailed in the Road Safety Action Plan (2003)2. The plan specifies that the EC will develop a road safety observatory to coordinate data collection within an integrated framework.
This study is aimed to investigate the correlations of impact conditions and dynamic responses with the injuries and injury severity of child pedestrians by accident reconstruction. For this purpose, the pedestrian accident cases were selected from Sweden and Germany with detailed information about injuries, accident cars, and accident environment. The selected accident cases were reconstructed using mathematical models of pedestrian and passenger car. The pedestrian models were generated based on the height, weight, and age of the pedestrian involved in accidents. The car models were built up based on the corresponding accident car. The impact speeds in simulations were defined based on the reported data. The calculated physical quantities were analyzed to find the correlation with injury outcomes registered in the accident database. The reconstruction approaches are discussed in terms of data collection, estimating vehicle impact speeds, pedestrian moving speeds and initial posture, secondary ground impact, validity of the mathematical models, as well as impact biomechanics.
The data situation for quantifying the proportion of accidents avoided by the introduction of active safety systems is incomplete, since there is generally no data available on the accidents avoided by the technology in question. In this paper, a split-register approach is suggested and compared with the classical case-control approach known from epidemiologic applications. Provided a set of assumptions hold, which can reasonably be made in such data situations, the split register approach allows inferences on the population accident risk. For both approaches the benefits of basing the analysis on the results of a logistic regression to adjust for confounding factors are outlined. The biasing effects of violating key assumptions are discussed and the split-register approach is demonstrated using the example of the active safety system ESP with data from the German in-depth accident study GIDAS.
Active safety systems are aimed at accident prevention, hence the knowledge required for their development is different from that required for passive safety systems aimed at injury prevention. Particularly, knowledge about accident causation is required. When looking at existing accident causation data, it is argued it fails to explain in sufficient detail how and why the accidents occur. Therefore, there is a need for detailed micro-level descriptions of accident causation mechanisms, and also of methodologies suitable for creating such descriptions. One study addressing these needs is the Swedish project FICA (Factors Influencing the Causation of Accidents and Incidents), where an accident investigation methodology suitable for active safety is developed, and in-depth accident investigations following this methodology are carried out on-scene in the area of Gothenburg by a multidisciplinary team. A preliminary aggregated analysis of different cases shows that the methodology developed is adequate for pointing out common contributing factors and devising principal countermeasures.
Electronic Stability Program (ESP) aims to prevent the lateral instability of a vehicle. Linked to the braking and powertrain systems, it prevents the car from running wide on a corner or the rear from sliding out. It also helps the driver control his trajectory, without replacing him, in the case of loss of control where the driver is performing an emergency manoeuvrer (confused and exaggerated steering wheel actions). A new ESP function optimizes ESP action in curves with hard under steering (situations in which the front wheels lose grip and the vehicle slides towards the outside of the curve). A complementary feature prevents the wheels from spinning when pulling away and accelerating. The name given to the ESP system varies according to the vehicle manufacturer, but other terms include: active stability control (ASC), automotive stability management system (ASMS), dynamic stability control (DSC), vehicle dynamic control (VDC), vehicle stability control (VSC) or electronic stability Control (ESC). This paper proposes an evaluation of the effectiveness of ESP in terms of reduction of injur accidents in France. The method consists of 3 steps: - The identification, in the French National injury accident census (Gendarmerie Nationale only), of accident-involved cars for which the determination of whether or not the car was fitted with ESP is possible. A sample of 1 356 cars involved in injury accidents occurred in 2000, 2001, 2002 and 2003 was then selected. But we had to restrict the analysis to only 588 Renault Lagunas. - The identification of accident situations for which we can determine whether or not ESP is pertinent (for example ESP is pertinent for loss of control accidents whilst it is not for cars pulling out of a junction). - The calculation, via a logistic regression, of the relative risk of being involved in an ESPpertinent accident for ESP equipped cars versus unequipped cars, divided by the relative risk of being involved in a non ESP-pertinent accident for ESP equipped cars versus unequipped cars. This relative risk is assumed to be the best estimator of ESP effectiveness. The arguments for such a method, effectiveness indicator and implicit hypothesis are presented and discussed in the paper. Based on a few assumptions, ESP is proved to be highly effective. Currently, the relative risk of being involved in an ESP pertinent accident for ESP-equipped cars is lower (-44%, although not statistically significant)rnthan for other cars.rn
The so-called "seat-belt injuries" or "seat-belt syndromes", described as 2-point seat-belt injuries, contain heavy inflection injuries of the lumbal spinal column, combined with heavy abdominal injuries as rupture of the upper intestinal bold or heavy injuries of the upper entrails. With "playing" children in the font of the car, with inappropriate plant of 3-point belts, identical injuries can occur.
Rollover scenarios in Europe
(2005)
Rollover accidents seem to be a rising problem in Europe and therefore the systematic of this accident scenario should be investigated. Based on statistical investigations on major European accident databases for different countries a series of 73 real world rollover accidents was analysed. These cases were reconstructed using PC-Crash and preliminary categorised using a modified USbased rollover classification. In a first step, the rollover events were reconstructed from the point of conflict to the vehicle- rest position. The vehicles kinematics as well as its linear and rotational velocities were derived. In a second step typical velocity characteristics as well as kinematics were identified and the events categorised according to these criteria. Based on these results four main categories were defined, covering all reconstructed accidents. This categorisation was based on mechanical parameters (rotatory and translator kinematical data of the vehicle). Significant differences can be seen for different scenarios for the "first phase of rollover".
This paper describes the methodology of In-Depth Investigation in Germany on the example of GIDAS (German In-Depth Accident Study). Since 1999 in Germany a joint project between FAT (Forschungsvereinigung Automobiltechnik or Automotive Industry Research Association) and BASt (Bundesanstalt für Straßenwesen or the Federal Road Research Institute) is being carried out in Hannover and Dresden. The methodology of this project is based on a statistically orientated procedure of data sampling (sampling plan, weighting factors). The paper describes the possibilities of such in-depth investigation on the results of the offered title. The accident cases were collected randomly within GIDAS at Hannover. There are more cases existing from previous investigation started in 1985 under the same methodology. The portion of rollovers can be established at 3.7% of all accidents with casualties in the year 2000. For the study 434 cases of car accidents with rollovers are used for a detail comprehensive analysis. The accidents happened in the years 1994 to 2000 in the Hannover area. The injury distribution will report about 741 occupants with rollover accident event. The presented paper will give an overview of the accident situations following in rollover movements of cars. The distributions of injury frequencies, injury severity AIS for the whole body and for the body regions of occupants will be presented and compared to technical details like the impact speed and the deformation pattern. The speed of the car was determined at the point of rollover and on the point of accident initiency. The characteristics of the kinematics followed in a rollover movement are analyzed and the major defined types of rollover will be shown in the paper. The paper will describe the possibilities of In-Depth Investigation methods for the approach of finding countermeasures on the example of car accidents with rollover and explaining the biomechanics of injuries in rollover movements.
This paper set out to examine the possibilities for injury avoidance implications for older drivers in crashes, based on crash and injury patterns among older drivers and current trends in ageing in most western societies. A number of safety technologies were identified and discussed which have potential for improving vehicle older driver crash avoidance and crashworthiness. While there were some promising estimates available of the likely benefits of this technology for improving safety, it is evident that they need to be confirmed for older drivers, given their age-related disabilities and sensory limitations. Further research is urgently required to ensure that these technologies yield safety benefits without any disbenefits for older drivers.rn
Nowadays airbags are part of the standard equipment in almost all new cars. While airbags are saving an increasing number of people from severe injuries and death in moderate and high speed crashes, they do not completely prevent dashboard injuries. The most common mechanism in dashboard injuries is a posteriorly directed force to the proximal tibia with the knee flexed. This may occur during a motor vehicle frontal impact accident when a knee of the driver or the front-seat passenger strikes the dashboard. The posterior force can be combined with a abducting or rotational force leading to concomitant lateral or posterolateral injury. Car and airbag manufacturers therefore develop special inflatable systems to reduce the impact force in dashboard injuries. Every new inflatable system, however, has to be evaluated in out of position situations in which the system might cause injuries to certain body areas. Therefore, we investigated a new kneebag system in different critical seating positions of post mortem test subjects (PMTS). The tested knee airbag module is a folded airbag (18 litre volume) which is installed below the lower section of the instrument panel of a passenger car. Using four PMTS (2 male, 2 female, age 36"67) the following positions were tested: normal seating position, knee flexed >90 degrees and knee flexed <60 degrees in static deployment tests with direct contact. In addition a dynamic test (48.8kph, AAMA-pulse) was carried out with the PMTS belted in a normal seating position. The inflation phase and the impact of the system on the knee/lower leg were analysed by high speed videos. After the test the lower legs of the PMTS were examined by Xray and autopsy. All soft tissue injuries and bone fractures were recorded. All the tests could be evaluated. Except some superficial skin lesions in the impact area no fracture of the bones around the knee and no knee ligament and tendon injuries were observed. Neither video analysis nor autopsy of the PMTS showed any critical contact injuries caused by the inflation process of the bag. Therefore, it can be concluded that in the tested seating positions which are the most critical for the knee area the knee bag system is safe.
This paper reviews briefly the evolution of the investigation of transport accidents from the early beginnings when individual events were studied but systematic data was not collected. In the transport modes other than on the roads, accident investigation early on, even of single events, was important in introducing safety improvements. Road accidents, however, evolved enormously with the growth of car ownership without any comparable political response to the consequent deaths and injuries, equivalent to what happened with the other modes. From the 1950s data bases started to contribute to our knowledge of the epidemiology of road traffic injuries, and in-depth sample studies have contributed much to the body of knowledge in the last 30 years. However, even the basic input and output variables of a crash, its severity and the seriousness of the outcomes in terms of injuries and their consequences are not complete or agreed upon. Issues of experimental design and sampling are discussed. It is proposed that the most important area for current research to address is the effect of population variations on injury outcomes. The need for the establishment of good data bases for active safety issues is emphasised with the consequent need for better links between the research community and the police.
Traffic accidents were ranked the third among the major causes of death in Thailand. About 13,438 deaths and the death rate from traffic accident was 21.5 per 100,000 of population in 2002. The deaths and death rate varied upon the economic situation. After the economic crisis, traffic accidents were increased as well as the period of the bubble economy. In the Central region of Thailand numbers of road traffic crashes were lower than Bangkok Metropolis, but the highest in the number of deaths, death rate and serious injuries in 2002. Men aged 15"29 years old had higher numbers of deaths than men in other age groups and higher than women. Deaths and injuries from road traffic crashes were the highest in April and January, because there was a long weekend in those months. About 80 percent of road traffic crashes were caused by private car and motorcycle. In 2000 about 51 percent of traffic accidents took place on the straight way, followed by the junction and curves. In 2002, about 97 percent of road traffic crashes were caused by human factors including improper passing, speeding and disregarding to traffic signal, however, the identification of causes of traffic accident needed to improve. Drunk driving, disregarding on safety equipment usage, inefficiency of law enforcement and discontinuing of road safety programs were the deepest causes of traffic accidents. Research based information, a broad coalition of stakeholder and urban planning policy were needed to incorporate for a comprehensive road safety policy formulation and actions.
Pelvic fracture, cracking or breaking of a portion of the pelvis are extremely common injuries in the side impact collisions of motor vehicles. Due to both its shape and structural architecture, mechanics of the pelvic bone is complicated. There is a lack of knowledge regarding the dynamic behavior of the pelvis and its biomechanical tolerance under impact environment. Hence this study is aimed at the understanding of the mechanical response of the human pelvis with three-dimensional finite element (FE) models, under side impact load, applied through a structure, equivalent to a car door. The door structure was modeled, considering few layers, consisting of foam (Styrodur®, 3035 CS), plastic (UHMWPE), steel, glass and steel, putting them in series. A soft tissue layer (equivalent to fat) was also considered on the greater trochanter location. These FE models (with and without the car door structure) were analyzed with ANSYS-LS-DYNA-® dynamic finite element software to compare the effect of the car door padding system for shock absorption. It was observed that with proper combination of shock absorbing material (foam, etc.) and its thickness, the transmission of impact load to the body part (pelvis, etc.) from the outer surface of the car door could be reduced.
Vehicle crash research at different levels is currently being conducted by several investigation groups in Spain, in some instances within various EU-funded projects. However there is a clear opportunity for increasing compatibility and maximizing usefulness, both at national and European levels, of the information collected by these groups. After reviewing on-going activities and programs in different countries, a framework for a nationwide crash investigation project is proposed: an organizational scheme is suggested as part of a future National Road Safety Strategic Plan; a map of investigation teams located in technological centres, universities and police agencies in Spain is presented; alternatives for several practical aspects such as team composition, deployment and operational budgets and project developmental stages are also discussed.
This report gives an overview of pedestrian accidents on Japanese roads. Database used for the analysis is national traffic accident data based on police reports. Relevant measures and background information ranging from vehicle safety, engineering and education are briefly reviewed, and area for further improvement is discussed.rn
Road safety is a major preoccupation of the European Commission and the road transport industry and depends on numerous significant factors. In order to improve road safety and to plan effective safety improvement actions for truck transport, we must first identify the problems to be addressed, i.e. what are the main causes of truck accidents. The ETAC project, initiated by the European Commission and the IRU, was launched in order to set up a heavy goods vehicle accident causation study across European countries to identify future actions which could contribute to the improvement of road safety. The results will be based on a detailed analysis of truck accident data collected in seven European countries according to a common methodology which has been elaborated through numerous national and European projects. This paper describes the common methodology used to collect the information on the scene of the accident and to analyse the data so that the reconstruction of the crash events may be carried out. CEESAR proposes a methodology using its experience gained from over 10 years of accident data collection. This methodology is based on an in-depth investigation of the parameters involved in-an accident and linked to the driver, the vehicle, the road and their environment. In-depth investigation requires accident investigator presence on the scene of the accident in order to collect volatile information such as marks on the road, weather conditions, visibility, state and equipment of the vehicle, driver interview. Later, passive and active information is gathered, either at the hospital for the driver, at the garage for the vehicle or on the spot for the road geometry. A reconstruction carried out with the help of specific software and the analysis of the data collected and calculated enables the identification of the main causes of the accident and the future actions to plan in order to improve road safety as regards truck traffic.
Motorcycle riders are one of the most vulnerable road users. Annually, on estimate 6000 people are killed in motorcycle accidents in the former 15 EU countries. The objective of this research was to investigate and analyze the main aspects and causes of this vulnerability and the accidents in general. For this aim around 70 accidents in The Netherlands were investigated in the framework of an international research program (MAIDS). Also a control group of motorcycles with riders was investigated so that exposure could be taken into account. An important result is that human failure is in 82% of the cases the main cause of the accident, in 52% this is due the other vehicle driver. Perception and decision failures are the most common failures. The most injuries are caused by the environment but they are typically only less severe (AIS1). Injuries caused by the car (front and side) are typically severe injuries (AIS4+). Previous convictions of the MC rider seem to be related to the chance to get involved in an accident. It was shown that the Dutch and the total MAIDS accident sample are comparable.
Nigeria ranks one of the highest countries in the world with the largest accident, especially when measured by whiplash associated disorders, whereas, traffic safety education rate, data and information been widely known as preventive indicators have been grossly neglected. In Nigeria, traffic safety enlightenment, awareness, political understanding and appreciation of the problem's magnitude are lacking. This study, therefore, seeks to understand and document the fact that accident causation factors in Nigeria relate more to the problem of development, poverty, knowledge and education as evidenced in most other developing countries. Among the primary accident causation factors on Nigerian roads are: - lack of a transportation system or multi-model integration - sub-standard and obsolete vehicles and road furniture - poor road maintenance, investment and engineering management - paucity of road users' and drivers' knowledge, skill, enlightenment and education of the road Use This paper submits that Nigeria being a developing nation requires purely primitive strategies being cost effective (health wise) than curative measures. It is in this light that an enduring, comprehensive and sustainable traffic safety educational programmes information base and data inventory, analysis and implementations form the focus of this study. This effort will provide basic guidelines framework and implementation procedure for a successful prevention of whiplash associated disorder resulting from road traffic crashes in Nigeria and other parts of the world.
Portugal has the highest rate of road fatalities in Europe (2002 and for Eur-15 - CARE database). For this highest rate, the accidents involving pedestrians and motorcycle occupants have a higher contribution than the European average. In the last years, especially accidents involving motorcycles have been investigated and currently two different projects are being carried out, one related with motorcycles accidents and the other with pedestrian accidents. In these projects, countermeasures among others to reduce the fatalities between these two types of road users are being studied. These accidents are investigated with the commercial accident reconstruction software PCCRASH but also new methodologies based on multibody dynamics are in development in order to more accurately study these two types of accidents. In this paper, the methodologies in use for accident reconstruction and new methodologies in development are presented. Speeding his found to be one of the major causes of road fatalities for pedestrians and motorcycle occupants. In the case of motorcycle accidents, these involve mainly young drivers. Aspects as social behavior are also important to understand the causes of some of these accidents. Some examples of accidents occurring in Portugal, involving especially motorcycles and pedestrians are presented and discussed.
This contribution introduces a number of psychological methods of analysis that are based on the practice-oriented collection of information directly at the site of an accident and that allow for an analysis and coding of the accident causes. Investigation examples and examples of the data combinations with basic medical and technical data are outlined. Objective of the collection is the inter-disciplinary investigation of human factors in the causes of accidents ("human-factor-analysis"). The psychological data are incorporated according to an integrative model for accident causes based on empiric algorithms in the data base of the accident research, where the clustered evaluation potential of comprehensive factors of the accident development can be illustrated. The central theoretical concept for the basic model of the progress of the accident from a psychological point of view comprises psychological indicators for the evaluation of the site of the accident for the analysis of the perception conditions as well as a classification of the gleaned data into the accident progress model according to chronological and local criteria. Perception conditions, action intentions and executions as well as conditions limiting perception and actions are acquired, using a questionnaire for persons involved in an accident, and are also integrated into the data structure concerning weighted feature characteristics as well as combined with other relevant features. Suitable systematization tools for the collection and coding of psychological accident development parameters have to be provided, which require primarily a model image of the corresponding processes from the persons involved in the accident (perceptions, expectations, decisions, actions). The interactive accident model contains components of the models by KÜTING 1990, MC DONALD 1972, SURREY 1969 and RASMUSSEN 1980. Based on the inter-action of the three partial systems "person", "vehicle" and "environment", the first step is the assessment of the situation by the persons involved in the accident. This is dependent on the personal attitudes and motives, on experiences and expectations concerning the progress of the situation. Subsequently, data concerning the manner of the coping with the ambiguous state as well as with the instable state (emergency reaction immediately before the accident occurs) are collected. The factors relating to the persons involved in the accident are gathered on several levels using corresponding questionnaires. The coding of the found and collected characteristics is conducted in a multidimensional evaluation relating to the technical results of the accident reconstruction and of the psychological classification, which are subsequently integrated in coded form into the data base of the accident research. The result of this analysis is a description of the development of the accident depicted on a chronological vector from a perception and decision theoretical perspective. This is explained in detail using exemplary cases.
The average CO2 concentrations relevant to a motorcyclist wearing an integral helmet were measured twenty years ago and found to be alarmingly high. The present study examined gas concentrations typically inhaled by a motorcyclist. Average concentrations of CO2 for persons (n=4) wearing integral motorcycle helmets were measured in the laboratory and the field to facilitate comparison to previous work, and similarly high average concentrations were found: above 2% when stationary, well below 1% for speeds of 50km/h or more. Detailed measurements of the time-dependent CO2 concentrations during normal inhalation showed levels of about half of the corresponding average concentrations, including 1% at standstill, though higher concentrations (4% or more) are inhaled at the beginning of each breath. Opening the visor at standstill lowered the average inhaled concentration only to about 0.8%. The oxygen deficiency is equal to the CO2 concentration, and could also contribute negatively to motorcyclist cognitive abilities.
In order to improve the protection of children transported in cars, within the CHILD programme (GR3D-CT2002-00791) real world road accidents are thoroughly analysed and then reconstructed in laboratory. Prior to comparing injury severities of real victims to physical parameter values measured on the dummies, the quality of the reconstructions is evaluated by experts who use their experience based on the investigation of numerous and various accidents. This paper presents a new tool aiming at better evaluating and validating accident reconstructions. It is based on statistical evaluation of vehicle deformations which gives weighing factors for every part of the car body structure finally leading to a specific Reconstruction Quality Score (RQS indicator). Furthermore, the reliability of this score, depending on the number of measured points, can be established. This tool includes a function aiming at adjusting the speed for a further reconstruction and at defining the launching speed and the pulse shape for complementary sled tests. Finally, the functions of the RQS software and database are presented.
Detailed investigations and reconstructions of real accidents involving vulnerable road users
(2005)
The aim of this research is to improve knowledge about vulnerable road users accidents and more specifically pedestrians or cyclists. This work has been based on a complete analysis of real accidents. From accidents chosen from an in-depth multidisciplinary investigation (psychology, technical, medical), we have tried to identify the configuration of the impact: car speed, pedestrian or cyclist orientations. Then, we have made a numerical modelling of the same configuration with a multibody software. In particular, we have reproduced the anthropometry of the victim and the front shape of the car. A first simulation has been performed on this starting configuration. Next, effects of some parameters such as car velocity or victim position at impact have been numerically studied in order to find the best correlations with all indications produced by the in-depth analysis. Finally, the retained configuration was close to the presumed real accident conditions because it reproduces in particular the same impact points on the car, the same injuries, and is according to the driver statement. This double approach associating an in-depth accident analysis and a numerical simulation has been applied on pedestrian-to-car and bicyclist-tocar accidents. It has allowed us to better understand the real kinematics of such impacts. Even if this method is based on a case to case study, it underlines which parameters are relevant on a vulnerable road user accident investigation and reconstruction.
Because of actual developments and the continuous increase in the field of drive assistant systems, representative and detailed investigations of accident databases are necessary. This lecture describes the possibility to estimate the potential of primary and secondary safety measures by means of a computerized case by case analysis. Single primary or secondary safety measures as well as a combination of both are presented. The method is exemplarily shown for the primary safety measure "Brake Assist" in pedestrian accidents. Regarding accident prevention only the primary safety measure is determined.
The improvement of passive car security devices led to a reduction of injuries, especially of the head, the neck and the torso mainly due to the airbag function. The passenger's foot and ankle could not profit from this development. Some investigators even reported a progression of leg injuries (1). In this study, we investigated a current collective of patients with foot and ankle fractures or severe soft tissue injuries in relation with defined crash parameters. Special interest was paid to the car's footwell.
Data concerning accidents involving personal injury which have been collected in the context of in-depth investigations on scene in the Hannover area since 1973 and in the Dresden area since 1999 represent an important basis for empirical traffic safety research. At national and international level various analyses and comparisons are carried out on the basis of "in-depth data" from the above mentioned investigations. In-depth data play a decisive role e.g. within the validation of EuroNCAP results on secondary safety (crashworthiness) of individual passenger car models. Thus, statistically sound methods of data analysis and population parameter estimation are of high importance. Since the 1st of August 1984 the "in-depth investigations on scene" in the Hannover area have been carried out according to a sampling plan developed by HAUTZINGER in the context of a research project on behalf of BASt. In the meantime a second region of in-depth investigation on scene was added with surveys in Dresden and the surrounding area. Internationally, the acronym GIDAS (German In-Depth Accident Study) is commonly used for the two above mentioned surveys. The objective of a current research project (topic of this contribution) is, among other things, to examine and adjust the previous weighting and expansion method for the two regional accident investigations to the current general conditions.
In-depth road traffic accident research in Spain is a fairly recent activity. In the past, only accident data that had been retrospectively processed by the national and regional traffic police forces was available. In 1999 Applus+IDIADA set up a permanent accident research unit to carry out indepth analysis of road accidents in Spain. Since then accidents involving cars, motorcycles, coaches and vulnerable road users have been thoroughly studied. The Applus+IDIADA accident research team has carried out work for the various traffic polices in Spain and it is currently involved in several research projects in which accidentology is one of the main tasks. The working methodology of the team is presented in the first part of the paper. In the framework of the European research project "Rollover" (GRD2-2001-50086), Applus+IDIADA has collected data, inspected scenarios and performed virtual reconstructions of twenty-six of the total seventy-six rollover accidents studied. The second half of the paper describes how these accident investigations were used to develop a test procedure for identifying possible improvements to the vehicle structure which augment occupant protection in a rollover scenario. In particular, a proposal for a new drop test for rollover assessment is presented. The cases were analysed for severity, in terms of injury to the occupants and damage to the vehicle, and taking into account whether a seatbelt was worn or not. The worst possible cases were identified as those that had severe occupant injuries and sizable damage to the occupant compartment when seatbelts had been worn. The most severe cases were then analysed further for impact position (roll and pitch angles) and the impact velocity. With these parameters taken into account, the most representative combinations could be found. This resulted in a series of configurations for possible drop tests. The results of the tests indicate where passenger vehicle structures need to be improved in order to increase occupant safety in the event of a rollover crash.
Sedan type vehicles in which adult rear seat passengers were present and which were involved in frontal collisions were investigated, and the influence of unbelted rear seat passengers on the injuries of front seat occupants was studied. Unbelted rear seat passengers move forward during impact. It was observed that there were not only cases in which front seat occupants sustained injuries caused by direct contact with rear seat passengers, but also cases where front seat occupants received severe injuries due to additional force from rear seat passengers, either impacting directly or indirectly as a result of deformation of the front seat. Severe injuries of front seat occupants were observed in the latter cases. This research validates the importance of seat-belt use for rear seat passengers, not only to protect themselves but also to mitigate injuries of front seat occupants.
Interaction of road environment, vehicle and human factors in the causation of pedestrian accidents
(2005)
The UK On-the-Spot project (OTS) completed over 1500 in-depth investigations of road accidents during 2000-2003 and is continuing for a further 3 years. Cases were sampled from two regions of England using rotating shifts to cover all days of the week and all hours of the day and night. Research teams were dispatched to accidents notified to police during the shifts; arrival time to the scene of the accident was generally less than 20 minutes. The methodology of OTS includes sophisticated systems for describing accident causation and the interaction of road, vehicle and human factors. The purpose of this paper is to describe and illustrate these systems by reference to pedestrian accidents. This type of analysis is intended to provide an insight into how and why pedestrian accidents occur in order to assist the development of effective road, vehicle and behavioural countermeasures.
Institute for Traffic Accident Research and Data Analysis <Tokyo>rnAbstract: Analyses were conducted to clarify the features of rear-end collisions, using an integrated accident database developed by the Institute for Traffic Accident Research and Data Analysis (ITARDA). Focusing on neck injuries in rear-end collisions, analyses were made of the relation to struck-vehicle properties. Regarding the relation to the initial year of registration, the results did not show that newer vehicles tended to have a lower no-neck-injury rate, which was defined in this study as an index. On the contrary, in some passenger car classes, it was observed that the no-neck-injury rate was higher in newer vehicles. The effect of an active head restraint system, which is one type of anti-whiplash device, was analyzed by using not only the no-neck-injury rate but also a regression analysis. The results showed that the effect of an active head restraint system on suppressing the incidence of neck injuries was statistically significant.rn
76 severe traffic accidents had been investigated in depth in an ongoing Volkswagen-Tongji University joint accident research project in JiaDing district, Shanghai, PR China since June 2005. With a methodology similar to German accident research units in Dresden and Hannover, a research team proceeds to the scene immediately after the incident to investigate and collect various data on environment, accident occurrence, vehicle state and deformations as well as injuries. The data combined with the results of accident reconstruction will be stored in a database for further statistical and casuistic analysis. The first outcome of the project supports the hypothesis that a main causation for the large number of traffic accidents in China is the lacking of risk awareness in Chinese driver behaviour. Low seat-belt use and the high proportion of vulnerable and poorly protected two-wheelers in traffic are reasons for the high injury and fatality rate in China. The research work shows that accident research in China is feasible and able to give support to tackle one of the urging problems in Chinese development.
The "Seven Steps Method" is an analysis and classification system, which describes the human participation factors and their causes in the temporal sequence (from the perceptibility to concrete action errors) taking into consideration the logical sequence of individual basic functions. By means of the "seven steps" it is possible to describe the relevant human causes of accidents from persons involved in the accident in an economic way with a sufficient degree of exactitude, because the causes can be further differentiated in their value (e.g. diversion as external diversion with regard to impact due to surroundings) and their sub values (e.g. external diversion with regard to impact due to surroundings in the shape of a "capture" of the perception by a prominent object of the traffic environment). Theoretically it is possible that one or more causing moments can be assigned to a person involved in an accident in each of the "seven steps"; however it is also possible to sufficiently clarify the cause in only one level (examples for this are described). In the practice of accident investigation at the site of the accident, the sequence chart is also relevant. With its assistance the questioning of the people involved in an accident can be accomplished in a structured way by assigning a set of questions to each step.
The European Union has set a target to reduce all road fatalities (over 40,000) with 50% in 2010. This target percentage remained unchanged with the introduction of the ten new member states within the EU as by May 1st, 2004. According to Eurostat, 34% of all fatalities in 1998 in the, then, fifteen states of the European Union were the result of single vehicle collisions. This represents over 14,000 lives lost each year of which many can likely be saved through better roadside infrastructure design. The challenge for road safety professionals is to find methods and design strategies that help to reduce these casualties. Procedures for full-scale vehicle crash testing of guard rails were first published in the US in 1962. Present European regulation is mainly based on these procedures and later developments. Since then the vehicle fleet has changed considerably. Due to the complexity of the actual safety problem the numerical simulation approach offers a good opportunity to evaluate the different parameters involved in road safety, such as infrastructure properties, vehicle type, vehicle occupants and injuries. The ideal situation would be that simulation tools are coupled or integrated and all involved effects would be related. At the moment this is not the case yet, but initiatives are taken and a new virtual era has started. This paper offers a method looking at two components that encompass the driving environment: the car and the guardrail. As part of the EC-funded project, RISER (Roadside Infrastructure for Safer European Roads) a multi body simulation program study is carried out to determine sensitivities of some parameters in car to guardrail collisions and gives insides in performance of the car with passive safety equipment, the guardrail and the interaction of these objects with each other. By offering a set of methods that includes these two aspects and their intertwining relations, more confidence can be gained in actually reducing fatalities due to single vehicle collisions with, or due to, roadside furniture. Reducing the number of fatalities of single vehicle crashes would contribute greatly to the stated goal of reducing casualties altogether.
Since the compulsory use of child restraints for children up to 5 years of age was introduced in 2000, restraint use among younger children has increased significantly. However, the observed rate of child restraint use plateaus at around 50%, and apparently little spillover effect has been found for older children who are not covered by the law. This report examines the restraint use patterns for children who were injured in cars in relation to driver and child passenger characteristics. Univariate and multivariate analyses were conducted to describe the association between the outcome measure (the proper use of restraints for children) and relevant variables. Better ways for parents and caregivers to improve the use of restraints for children are also discussed.
The incidence and treatment of sternal fractures among traffic accidents are of increasing importance to ensure best possible outcomes. Analysis of technical indicators of the collision, preclinical and clinical data of patients with sterna fractures from 1985-2004 among 42,055 injured patients were assessed by an Accident Research Unit. Two time groups were categorized: 1985-1994 (A) vs. 1995-2004 (B). 267/42,055 patients (0.64%) suffered a sterna fracture. Regarding the vehicle type, the majority occurred after car accidents in 0.81% (251/31,183 pts), followed by 0.19% (5/2,633pts) driving motorbike, and 0.11% (4/3,258pts) driving a truck. 91% wore a safety belt. Only 13% of all passengers suffering a sternal fracture had an airbag on board (33/255 car/trucks), with an airbag malfunction in 18%. The steering column was deformed in 39%, the steering wheel in 36%. Cars in the recent years were significantly older (7.67-±5 years (B) vs. 5.88-±5 years (A), p=0.003). Cervical spine injuries are frequent (23% vs. 22%), followed by multiple rib fractures (14% vs. 12%) and lung injuries (12% vs. 11%). We found 9/146 (6%) and 3/121 patients (3%) with heart contusion among the 267 sternal fractures. MAIS was 2.56-±1.3 vs. 2.62-±1.3 (A vs. B, p=0.349). 18% of patients were polytraumatized, with 11.2% dying at the scene, 2.3% in the hospital. Sternal fractures occur most often in old cars to seat-belted drivers often without any airbag. Severe multiple rib fractures and lung contusion are concomitant injuries in more than 10% each indicating the severity of the crash. Over a twentyyear period, the injury severity encountered was not different with 18% polytrauma patients suffering sternal fractures.
Due to recent years accident avoidance and crashworthiness on Austrian roads were mostly developed on national statistics and on-scene investigation respectively. Identification and elimination of black spots were main targets. In fact many fatal accidents do not occur on such black spots and black-spot investigation has reached a limit. New methods are required and therefore the Austrian Road Safety Programme was introduced by the Austrian Ministry of Transport, Innovation and Technology. The primary objective is the reduction of fatalities and severe injuries. Graz University of Technology initiated the project ZEDATU (Zentrale Datenbank tödlicher Unfälle) with the goal to identify similarities in different accident configurations. A matrix was established which categorizes risk and key factors of participating parties. Based on this information countermeasures were worked out.
NASS: the glass is half full
(2007)
The National Accident Sampling System (NASS) was born in the late 1970s. It was based on a substantial amount of experience and analysis of what was needed in the United States to understand the safety challenges of our highways. This work also showed how to collect high quality and useful crash data efficiently. Unfortunately, when Ronald Reagan - a President who believed in limited government - was elected, any hope of full funding for NASS was lost. The concept of 75 teams investigating about 18,000 serious crashes in detail annually was never realized. The system got up to 50 teams, then was cut to 36, and finally to 24 teams investigating fewer than a quarter of the originally anticipated number of crashes per year. Despite this, the NASS investigations provide a rich source of data, collected according to a sophisticated statistical sampling system to facilitate detailed national estimates of road casualties on our nation- highways and their causes. In addition, changes have been made in recent years to increase the number of more serious crashes of recent model vehicles to make the results more relevant to improving vehicle safety. A recent, detailed examination of hundreds of rollovers has provided considerable insight into rollover casualties and into what can be done to reduce them. Some of these results will be presented that show the value of the NASS system. Our experience with NASS and the Fatal Accident Reporting System (FARS) suggests a number of improvements that could be made in the United States" crash data systems. It also provides justification for a doubling or tripling of our national expenditures on crash data collection.
The increase in light duty trucks (LDT) on the road in the US is a safety concern because of their aggressivity, or risk they present to occupants of cars, especially in side impacts. We use FARS data to look at fatality trends in frontal and side impacts between cars and LDT. FARS data is also used to determine risk, or fatalities per registered vehicle, imposed on car drivers from other vehicle types. We use NASS CDS data to investigate sources of serious injuries in vehicles with side impact. These sources of injury are categorized into three major groups: 1) contact without intrusion, 2) contact with intrusion, and 3) restraints. We find a greater fraction of intrusion related injuries in cars struck on their side by SUV or pick-up trucks than when they are struck by other cars.
This study examines the severity and types of injuries sustained by child pedestrians aged 18 years and below in order to identify the body regions at greatest risk for injury in a pedestrian accident. Detailed medical diagnoses were reviewed retrospectively for 572 child pedestrians admitted to an urban pediatric trauma center with injuries during the time period from January 2001 to December 2005. Eighty percent of these children sustained AIS 2 or greater injuries, most commonly to the lower extremity (41%) and head (34%). Fortyfour percent of admitted children had more significant AIS 3 or greater injuries primarily to the head (58%), thorax (17%) and lower extremities (14%). Testing procedures to assess the child- interaction with the motor vehicle should include injury assessment for the pediatric head, thorax and lower extremities. This understanding of how child pedestrians interact with motor vehicles may provide insight into effective countermeasures with potential for implementation in vehicle designs world-wide.
The number of injuries sustained by car occupants involving the head, thorax, spine, pelvis and the upper limbs have been reduced significantly during recent years. This is probably due to better safety features in the cars, especially the availability and usage of safety belts, airbags etc. Therefore one can notice clinically a relative increase in survivors of severe frontal crashes, but many of them have injuries to the lower extremities. To verify this, we analyzed the foot and ankle injuries of front seat passengers.
In Finland all fatal motor vehicle accidents are studied in-depth on-the-spot by multidisciplinary (police, road and vehicle engineers, physician and behavioural scientist) road accident investigation teams (legislation 2001, work started 1968), which operate in every province. The purpose of the teams is to uncover risk factors that turned an ordinary driving situation into a serious accident and give safety recommendations for improving road safety. The investigation teams do not take a stand on guilt or insurance compensation. When analysing accidents the teams use the concepts of key event, immediate, background and injury risk factors. Compiled investigation folders of each case contain investigation forms from each member, preinvestigation protocol, photographs, sketches etc. About 500 items of information are collected from each accident party. The collected information is also coded into a computer database. Both the database and the investigation folders are widely utilized by researchers and authorities conducting safety work.
This study aimed to identify the occurrence, type and mechanisms of the traumatic injuries of the vulnerable road users in vehicle collisions, and to determine the effects of human, engineering, and environment factors on traffic accidents and injuries. The pedestrian accident cases were collected in the years 2000 to 2005 from Changsha Wujing hospital China and Accident Research Unit at Medical University Hannover in Germany. A statistic analysis was carried out using the collected accident data. The results from analysis of Changsha data were compared with results from analysis of GIDAS data Hannover. The injury severities were determined using AIS code and ISS values. The results were presented in terms of cause of injuries, injury distributions, injury patterns, injury severity. The factors influenced the injury outcomes were proposed and discussed for the vehicle transport environment and road users. The results were discussed with regard to accident data collection, accident sampling and injury distributions etc. In the urban area of Changsha, motorcycles and passenger cars are most frequently involved in vehicle pedestrian accidents. Head and lower extremities injuries are the predominant types of pedestrian injuries. The pedestrian accidents were identified as vital issue in urban traffic safety and therefore a high priority should be given to this road user group in research of safe urban transportation. In Hannover area, cars are most frequently involved in traffic accidents, injured pedestrians are involved in road traffic of Germany in 13% of all causalities only in 2005 and have nearly the same number as motorcyclists, but the half of bicyclists.
The objective of this study was to identify aspects of the individual experience and behaviour of drivers in intersection accidents. A total of 40 accident drivers sketched their ideas and expectations relating to intersection assistance using the method of Structure Formation Technique. Using this method prepared content cards and relation cards for a subject matter are formed together in a structure through the application of an explicit set of rules. The structures generated in this process were compared with the structures of 20 control persons who have not recently experienced an accident at intersections. The basis for this comparison was a case-control design with matched samples regarding the variables age, sex, education, occupation, driving experience and annual mileage. The results of the accident reports indicate that additional assistance is instrumental in the perception of other road users. Generally the interviewed drivers were open-minded towards the use of intersection assistance systems. Drivers who have recently experienced an accident at intersections significantly more often approved of warning assistance in their vehicle than drivers who have not recently experienced an accident. Further accident experienced drivers favoured warning and information via audio warning more frequently. The ideas of the drivers were strongly shaped by the experiences with already available advanced driver assistance systems. Hence acoustic and visual warnings were generally preferred to tactile warnings. The findings also indicate a relationship between the variable age and the acceptance of automatic vehicle intervention, and the suggestion of a head up display as a configuration of a visual warning system.
This study updates previous IIHS studies comparing estimated delta Vs for crash tested vehicles to the distribution of estimated delta Vs in the National Automotive Sampling System (NASS) Crashworthiness Data System (CDS). The delta V estimates for 232 frontal crash tests at 64.4km/h into a deformable barrier with 40 percent overlap are compared with estimates from frontal offset crashes in the 1997-2004 NASS database. All delta V estimates were based on SMASH, the delta V estimating program used by NASS since 1997. Results indicated that for all vehicles tested by IIHS, SMASH delta Vs were, on average, 32 percent lower than impact speeds and about 28 percent lower than the expected delta V. Almost 80 percent of all real-world frontal crashes resulting in AIS 3+ injuries and just over 60 percent of all fatal crashes occur at or below the average estimated delta V calculated for crash tested vehicles.
In the context of this study, different data sources for accident research were examined regarding their possible data access and evaluated concerning the individual quality and extent of the data. Analyses of accidents require detailed and comprehensive information in particular concerning vehicle damages, injury patterns and descriptions of the accident sequence. The police documentation supplies the basic accident statistics and is amended in the context of the forensic treatment by further information, e.g. by medical and technical appraisals and witness questionings. As a new approach to the data acquisition for the analysis of fatal traffic accidents, the information was made usable which was collected by the police and by the investigations of the public prosecutor. The best strategy for obtaining reliable, extensive and complete data consists of combining the information from these two sources: the very complete, but elementary statistic data of the Niedersächsisches Landesamt für Statistik (Lower Saxony State Authority of Statistics), based on the police documentation as well as the very extensive accident information resulting from the investigation documentation of the public prosecutor after conclusion of the procedure, the so-called Court Records. Of all 715 fatal traffic accidents, which happened in the year 2003 in the German State of Lower Saxony, 238 cases were selected by means of a statistically coincidental selective procedure based on a statistically representative manner (every third accident). These cases cover the investigation documents of the 11 responsible public prosecutor- offices, which were requested and evaluated while preserving the data security. Of the 238 cases 202 cases were available, which were individually coded and stored in a data base using 160 variables. Thus a data base of a sample of representative data for fatal accidents in Lower Saxony was set up. The data base contains extensive information concerning general accident data (35 variables), concerning road and road surface data (30 variables), concerning vehicle-specific data (68 variables) as well as concerning personal and injury data (27 variables).
The primary goal of this investigation was to determine the relative risk of traffic accidents in students. In a two year period, a survey amongst 2,325 students was carried out, and 3,645 injuries sustained by students treated at our hospital were analyzed. Moped-riding in adolescents were associated with a 23.75-fold increased risk for injury as compared to biking. Children who ride bicycles have a 2.2-fold increased risk for an injury sustained by traffic accidents compared to pedestrians. None of 50 injured bicycle riders with helmet had an AIS for head injuries of more than 2. 24 of 233 injured bicycle drivers without helmet had an AIS for head injuries of more than 2. The use of a protective helmet significantly reduced the severity of head injuries. The level of awareness towards danger and a history of previous accidents correlate with the likelihood of future accidents. Due to the severity of traffic accidents, more adequate prevention measures (wearing of bicycle helmets and better education for moped riders) are urgently needed.
The price of a new car increased almost every year for a long period. In recent years however, the budget available to most people for purchasing a car either did not grow or became even smaller. Therefore it was in the interest of some OEMs to offer economical car models in the so-called "8,000- Euro class". Here an important question arose regarding the safety of these vehicles. There is no question that the very high safety level of cars reached in Europe during the last decades should not be sacrificed as a consequence of smaller budgets. Customers with sense of responsibility have the right to be properly informed about the balance between safety and price so that they can make a deliberate decision when buying either a new or a used car. Against this background, the German magazine "AutoBILD" commissioned DEKRA to conduct fullscale frontal crash tests with a view to publishing the results. These tests have been carried out in accordance with the corresponding Euro NCAP crash test requirements and performance criteria. The tested vehicles were two new Logans produced by the manufacturer Dacia, two used cars of the type VW Golf IV (registration date 2000) and one new VW Fox. This paper describes the safety features of the vehicles and the results of the five crash tests to demonstrate state-of-the-art safety levels and what levels may be expected from vehicles in the "8,000- Euro class". Looking at real-world crashes it is of interest to think about future trends in a more detailed manner. Therefore it will be more and more necessary to supplement the federal statistics with more detailed in-depth information about the consequences of accidents and the safety performance of crashed vehicles.
In recent years the boundaries between active and passive safety blurred more and more. Passive safety in the traditional term includes all safety aspects to prevent occupants to be injured or at least injury severity should be reduced. Passive Safety starts with the collision (first vehicle contact) and ends with rescue (open vehicle doors). Within this phase the occupant has to be protected by the passenger compartment whereby no intrusion should occur. Active safety on the other side was developed to interact prior to the collision whereby the goal is to prevent accidents. The extensive interaction between active and passive safety led to the terminologies "Primary" and "Secondary" safety whereas the expression Integrated Safety Concept was generated. Within this study the most well documented single vehicle accidents with cars not equipped with ESP were identified from the PENDANT database and reconstructed. Additional cases were found in the database ZEDATU of TU Graz. In comparison each case was simulated with the assumption that the cars were equipped with ESP. The differences regarding accident avoidance or crash severity as well as reduction of injury risk were analysed.
This paper uses the national accident statistics of Great Britain to evaluate the effectiveness of Electronic Stability Control Systems (ESC) to reduce crash involvement rates. The crash experience of 8,951 cars is analysed and compared to a closely matching set of non-ESC cars using case-control methods. This is one of the largest ESC samples analysed to date. Overall the cars with ESC are involved in 3% fewer crashes although the effectiveness is substantially higher under conditions of adverse road friction. ESC equipped cars are involved in 15% fewer fatal crashes although this reduction represents the combined effect of ESC and passive safety improvements.
There is a need for detecting characteristics of pedestrian movement before car-pedestrian collisions to trigger a fully reversible pedestrian protection system. For this purpose, a pedestrian sensor system has been developed. In order to evaluate the effectiveness of the sensor system, the in-depth knowledge of car-pedestrian impact scenarios is needed. This study aims at the evaluation of the sensor system. The accident data are selected from the STRADA database. The accident scenarios available in this database were evaluated and the knowledge of the most common scenarios was developed in terms of the pedestrian trajectory, the pedestrian speed, the car trajectory, the car velocity, etc. A mathematical model was then established to evaluate the sensor system with different detective angles. It was found that in order to detect all the pedestrians in the most common scenarios on time the sensor detective angle must be kept larger than 60 degrees.
The accident research project in Dresden was founded in July 1999. To date over 6.000 crash investigations have been undertaken. About 10.000 vehicles have been documented and over 13.000 participants have been debriefed. But there is much more than this scientific success. Because of the interdisciplinary character between the medical and technical focus, the project affords an important contribution for the education of the involved students. Over 200 students of different fields of study have got experiences not only for the occupational career. This lecture describes the additional effects of the accident research project regarding the education of the students, the capacity for teamwork and learning about dealing with accident casualties.
Description of road traffic related knee injuries in published investigations is very heterogeneous. The purpose of this study was to estimate the risk of knee injuries in real world car impacts in Germany focusing vulnerable road users (pedestrians, bicyclists and motorcyclists) and restrained car drivers. The accident research unit analyses technical and medical data collected shortly after the accident at scene. Two different periods (years 1985-1993 and 1995-2003) were compared focusing on knee injuries (Abbreviated Injury Scale (AISKnee) 2/3). In order to determine the influences type of collision, direction and speed as well as the injury pattern and different injury scores (AIS, MAIS, ISS) were examined. 1.794 pedestrians, 742 motorcyclists, 2.728 bicyclists and 1.116 car drivers were extracted. 2% had serious ligamentous or bony injuries in relation to all injured. The risk of injury is higher for twowheelers than for pedestrians, but knee injury severity is higher for the latter group. Overall the current knee injury risk is low and significant reduced comparing both time periods (27%, p<0,0001). Severe injuries (AISKnee 2/3) were below 1%). Improved aerodynamic design of car fronts reduced the risk for severe knee injuries significantly (p=0,0015). Highest risk of injury is for motorcycle followed by pedestrians, respectively. Knee protectors could prevent injuries by reducing local forces. The classically described dashboard injury was rarely identified. The overall injury risk for knee injuries in road traffic is lower than estimated and reduced comparing both periods. The aerodynamic shape of current cars compared to older types reduced the incidence and severity of knee injuries. Further modification and optimization of the interior and exterior design could be a proper measurement. Classic described injury mechanisms were rarely identified. It seems that the AIS is still underestimating extremity injuries and their long term results.
Im Beitrag wird über Rissbildungen in orthotropen Fahrbahnplatten, die im "Schubzahn" des Querträgerstegblechs von den Anschlussschweissnähten trapezförmiger Längsträger ausgehen, berichtet. Der Rissausgangspunkt liegt im Bereich der Ausnehmung des Querträgersteges für die durchlaufenden Längsträger. Durch Optimierung der Querträgerausnehmung und örtliche Verstärkung (Aufpflasterung) des Querträgerstegblechs im Bereich des Schubzahnes soll eine dauerhafte Instandsetzung der aufgetretenen Schäden ermöglicht werden. Durch genauere numerische und versuchstechnische Untersuchungen soll diese Aussage untermauert werden. Einzelheiten der bereits durchgeführten Untersuchungen werden mitgeteilt.
Die Lastübertragung von den Fahrzeugrädern auf die Fahrbahntafel wird beschrieben, und es wird eine Übersicht der ermüdungsempfindlichen Schweissnahtbereiche von Deckblech, Längssteifen und Querträgern gegeben. Die charakteristischen Schwachpunkte der Schweissverbindungen werden in Skizzen dargestellt.
Aufgrund ständig steigender Verkehrsintensität und gleichzeitig ansteigenden Fahrzeuggewichten werden auch die Stahlbrücken mit orthotropen Fahrbahnplatten hinsichtlich Ermüdung stärker beansprucht. Zumeist wurden diese Brücken in den 60er Jahren gebaut und die heutigen Qualitätsstandards und Empfehlungen wurden nur zum Teil eingehalten. Ein nicht ausreichender Ermüdungswiderstand der Details in Kombination mit steigenden Ermüdungsbeanspruchungen führt früher oder später zu Schäden; bei einigen Brücken in Deutschland sind Schäden aufgetreten. Die zukünftige Verkehrsbeanspruchung führt dazu, dass eine Reparatur alleine nicht ausreichend ist, sondern eine nachhaltige Instandsetzung, das heisst Ertüchtigung bestehender orthotroper Platten erfolgen muss, um auch bei weiter ansteigenden Ermüdungsbeanspruchungen eine hinreichende Gesamtlebensdauer ohne erhöhten Wartungsaufwand sicherzustellen. Vor diesem Hintergrund haben das Bundesministerium fuer Verkehr, Bau- und Wohnungswesen (BMVBW) und die Bundesanstalt fuer Straßenwesen (BASt) ein Forschungsvorhaben in Auftrag gegeben, um nachhaltige Instandsetzungsmaßnahmen zur Ertüchtigung von orthotropen Fahrbahnplatten bei Stahlbrücken unter der besonderen Berücksichtigung des Belagsystems zu untersuchen und zu entwickeln. Zurzeit sind verschiedene Lösungen zur nachhaltigen Ertüchtigung orthotroper Fahrbahnplatten in der Erforschung, teilweise wurden bereits erste Probeanwendungen durchgeführt. Erste Pilotprojekte wurden in Deutschland mit der SPS-Maßnahme, dem Einsatz von PmB 25 und in den Niederlanden unter anderem mit dem hochfesten, mit Stahlfasern versehenen und bewehrten Beton durchgeführt. Zu weiteren Möglichkeiten, wie dem offenporig mit Epoxidharz vergossenen Asphalt, werden noch Bauteilversuche durchgeführt, die die Wirksamkeit solcher Maßnahmen bestätigen sollen. Die Schlussfolgerungen sind zur Zeit wie folgt: - Behandlung bauweisenbedingter Schäden: Zur Behebung der Ursachen sind fallspezifische Lösungen erforderlich, die in der Regel nicht zu einer Verbesserung der allgemeinen Ermüdungsfestigkeit orthotroper Fahrbahnplatten beitragen. - Behandlung bauweisenunabhängiger Schäden: Die Instandsetzung der Schäden ist möglichst in Kombination mit einer geeigneten Ertüchtigungsmaßnahme durchzuführen, sodass die orthotrope Fahrbahnplatte auch für zukünftige Verkehrsbeanspruchungen dauerhaft ist. - Die Instandsetzungsmaßnahmen sind im Gesamtzusammenhang des Brückenbauwerks zu sehen: Die Instandsetzung von Schäden ist in einem Gesamtzusammenhang mit anderen erforderlichen Unterhaltungsmaßnahmen an der Brücke zu sehen, so kann zum Beispiel eine mögliche Schweissreparatur an der Brücke ein Auswahlkriterium für die Art der Belagserneuerung und die Wahl einer geeigneten Abdichtung sein.
Die Brücke hat eine Länge von 660 Metern und überquert das Haseltal mit einer maximalen Höhe von 70 Metern. Sie ist ein Durchlaufträger über sieben Felder mit Stützweiten von 5 x 101,60 Metern für die Mittelöffnungen und 2 x 76,20 Metern für die Endfelder. Zwei im Abstand von 18,53 Metern angeordnete vollwandige Hauptträger unterstützen die als orthotrope Platte ausgebildete 29,30 Meter breite Fahrbahntafel. Die seitlichen Kragarme sind über 5 Meter weit gespannt. Erbaut wurde die Brücke in den Jahren 1959 bis 1961. Die konstruktive Ausbildung des Überbaus wird im Einzelnen beschrieben. Auffällig ist das geringe Flächengewicht des Überbaus von nur 248 Kilogramm je Quadratmeter. Beschrieben wird zunächst der Bauablauf mit einigen Besonderheiten, ausserdem die Prüfungen während der Bauausführung und der Zustand des Bauwerks zum Ablauf der zehnjährigen Gewährleistungszeit. Bei einer Hauptprüfung des Überbaus wurden 1983 neben anderen Schäden zahlreiche systematische Risse, besonders in den Schweissnähten festgestellt, die 1985 bis 1988 zu einer umfangreichen Instandsetzung führten. Im Jahre 2002 wurden erneut viele Risse in den Schweissnähten gefunden, die umgehend wieder instand gesetzt wurden. Es wurden jährliche Sonderprüfungen angeordnet und wegen des desolaten Zustandes des Überbaus ein Neubau beschlossen. Einzelheiten zu den Schadensursachen, die durch Gutachten und Versuche festgestellt wurden, werden dargestellt.
Im Beitrag wird zunächst der Begriff "Orthotrope Fahrbahnplatte" erläutert: Früher war das Konstruktionsprinzip des Brückenbaus so, dass jedes Tragglied die ihm eigene und zugewiesene Last allein zu tragen hatte und die daraus entstandenen Auflagerbelastungen an das nächste unterstützende Bauteil weitergab. So ging es von der Fahrbahn ueber Längs- und Querträger zu den Hauptträgern, und von da aus zu den Auflagern, Pfeilern, Fundamenten bis zum Baugrund. Nach dem 2. Weltkrieg wurden andere Lastabtragungsmodelle entwickelt. Bei der "Orthotropen Platte" handelt sich um eine für den Stahlbrückenbau entwickelte Bauweise, die aus einem oberen ebenen Stahlblech besteht, welches die Abdichtung und den Fahrbahnbelag trägt. Dieses wird auch Deckblech genannt. Das Deckblech wird durch ein rechtwinkliges System von längs und quer angeordneten Stahlprofilen unterschiedlicher Steifigkeit (Laengssteifen und Querträger) unterstützt. Das aus den drei Bestandteilen bestehende kombinierte System der Fahrbahntafel ist ausserdem mittragender Bestandteil des Gesamttragsystems der Brücke. An Beispielen werden die verschiedenen Möglichkeiten der konstruktiven Ausbildung der Fahrbahntafel mit ihren Vor- und Nachteilen erläutert. Es werden Hinweise zur Berechnung und baulichen Durchbildung insbesondere der Schweissverbindungen zwischen Deckblech und Längsrippen und des Stosses der Rippen (Fensterstoß) sowie zur Steifigkeit der Querträger gegeben. So genannte Trapezprofile haben sich als die günstigste Form für die Längsrippen ergeben. Sie werden auch vorteilhaft als Beulsteifen für Stege und Bodenplatten bei Kastenträgerbrücken aus Stahl und bei Verbundbrücken angewendet.
Angesprochen wurden aktuelle Entwicklungen beim Neubau und neue Entwicklungen bei Instandsetzungen und Verstärkungen. Eingegangen wird zu Beginn auf den Bestand an Brücken im Bundesfernstraßenbereich und auf die Entwicklung der Stahlpreise zwischen 2004 und 2008 mit einer sprunghaften Verdoppelung im August 2008 gegenüber den Jahren davor. Anschließend wird der Neubau von Stahlbrücken beleuchtet, auch mit Angabe der Möglichkeiten des Bundesministeriums fuer Verkehr, Bau und Stadtentwicklung (BMVBS) zur Förderung technischer Weiterentwicklungen und Innovationen. Aktuelle Entwicklungen bei Stahlverbundbrücken sind einteilige Überbauquerschnitte, VFT-Träger für Überführungen, luftdicht verschweisste Kästen, Hohlkästen mit Wellstahlträgern und Stahlrohrfachwerke. Alle diese Themen werden mit Beispielen unterlegt dargestellt. Neue Entwicklungen bei Instandsetzungen und Verstärkungen betreffen die verschiedenen Arten der Verstärkung von orthotropen Platten durch Aufkleben von Stahlplatten, Aufbringen einer Sandwichplatte (Sandwich-Plate-System (SPS)), Aufbetonieren einer dünnen Schicht aus ultrahochfestem Beton und Aufbringen eines steiferen Fahnbahnbelags.
Stahlbrücken mit orthotropen Fahrbahnplatten haben in Deutschland eine lange Traditon, bedürfen aber aufgrund der ständig gestiegenen Belastung durch den Schwerverkehr in einigen Fällen einer Instandsetzung oder sogar einer nachträglichen Verstärkung. Der Beitrag stellt vor diesem Hintergrund neue Wege und Methoden zur Verstärkung orthotroper Fahrbahnplatten vor und erläutert die Grundsätze und Randbedingungen ihrer Anwendung. Alle Erfahrungen haben gezeigt, dass nur Verstärkungsmethoden, die das Trag- und Verformungsverhalten der orthotropen Platte beachten und verbessern, erfolgreich sind. Nachdem die technische Entwicklung der orthotropen Platte dargestellt wurde, geht der Bericht auf die Bemessung sowie auf das Trag- und Verformungsverhalten dieses Bauteils ein. Grundsätzlich erfolgt die Berechnung und Bemessung der orthotropen Platte durch Zerlegung des Gesamtsystems in einzelne Subsysteme, die den Kräfteweg von den einwirkenden Reifenlasten bis in die Auflagerkräfte der Brücke stufenweise nachvollziehen. Auf die Bemessung der Subsysteme und die potenziell an den Systemen möglichen Schäden wird eingegangen. In einem weiteren Teil behandelt der Bericht Erfahrungen mit Instandsetzungsverfahren. Die Gefährdung der Dauerhaftigkeit der Bauteile wird in die Kategorien 1 bis 4 eingeteilt, mit Kategorie 1 als höchster Gefährdungsstufe. Die bei den einzelnen Kategorien aufgetretenen Schäden, ihre Ausprägung und die Ursachen des Entstehens werden erläutert. Der Bericht beschreibt auch Planungsmittel für Instandsetzungs- und Verstärkungsmaßnahmen sowie prophylaktische Verstärkungsmaßnahmen und die Entwicklung nachhaltiger Verstärkungen. Dabei spielt bei einigen Maßnahmen die Verbesserung der Verbundeigenschaften zwischen Stahlblech und Asphaltbelag eine wichtige Rolle. Weitere Entlastungsmöglichkeiten des Deckblechs bestehen darin, die Steifigkeit durch eine aufgesetzte Sandwichkonstruktion zu vergrößern oder das Deckblech mit einer 50 mm dicken Schicht aus bewehrtem hochfesten Stahlfaserbeton zu verstärken.
Der Beitrag berichtet in einem ersten Teil über die in den Niederlanden angewendeten Inspektionstechniken zur Feststellung von Schäden (Rissen) bei orthotropen Stahlfahrbahnplatten und in einem zweiten Teil über die Instandsetzung der Moerdijkbruecke mit einer zusätzlichen Deckschicht aus bewehrtem hochfesten Stahlfaserbeton. Die Ausführungen zu den Inspektionstechniken umfassen die visuelle Inspektion, magnetische Inspektion, Farbeindringprüfung, Ultraschallprüfung und Diffraktionseffekt bei Anstrahlen von Fehlern (Time of Flight Diffraction (TOFD)) sowie radiographische Untersuchungen und das Wirbelstromverfahren. Für jede dieser Methoden wird ihre Wirkungsweise, Handhabung und der Anwendungsbereich angegeben. Die Moerdijkbrücke ist eine der meistbefahrenen Brücken in den Niederlanden mit einem erheblichen Schwerverkehrsaufkommen und weist etliche Schäden am Deckblech auf. Die bisher durchgeführte Instandsetzung durch Ausbessern der Längsschweissnähte führte nicht zum erhofften Erfolg. Der Bauherr entschloss sich daher, die Gussasphaltschicht durch einen bewehrten hochfesten Stahlfaserbeton mit einer Dicke von 5 cm mit Verbund zum Stahldeckblech zu ersetzen. Die Spannungen im Deckblech konnten auf diese Weise um einen Faktor 4 bis 5 reduziert werden. Die Methode reagiert jedoch empfindlich auf Abweichungen der Mischungsverhältnisse des Betons und der Viskosität.
Bei Schrägseilbrücken und Hängebrücken ist die Tragfähigkeit und die Betriebsfestigkeit der Seile von entscheidender Bedeutung. Da in Deutschland seit einigen Jahren wieder verstärkt Schrägseilbrücken gebaut werden, kommt den neueren Entwicklungen auf diesem Gebiet eine besondere Bedeutung zu. Diese neuen Entwicklungen werden im Bericht beschrieben. An erster Stelle steht dabei die Anwendung von Litzenbündeln (LBS) in Deutschland bei der fertiggestellten Ziegelgrabenbrücke im Brückenzug der Rügenbrücke und der im Bau befindlichen Niederrheinbrücke Wesel. Diese im Ausland schon seit vielen Jahrzehnten angewendete Bauart stieß in Deutschland bisher auf Bedenken, insbesondere wegen der Prüfbarkeit und des Korrosionsschutzes. Litzenbündel bestehen im Wesentlichen aus 7-drähtigen Spannstahllitzen und speziellen Verankerungsteilen. Auf der freien Länge des Seils sind die Litzen durch ein HDPE-Rohr gegen äussere Beschädigungen und Umwelteinflüsse geschützt. Da Seile aus Litzenbuendeln bisher nicht bauaufsichtlich geregelt sind, war eine Zustimmung im Einzelfall erforderlich. Die Prüfung der Seile bei den regelmäßig durchzuführenden Bauwerksprüfungen ist verbunden mit einem großen technischen Aufwand, hohen Kosten und Beeinträchtigungen des Verkehrs. Der Bericht geht ausführlich auf mögliche Methoden der Seilprüfung ein. Bei der Ziegelgrabenbrücke wurde die magnetinduktive Prüfung, die sich bei vollverschlossenen Seilen seit vielen Jahren bewährt hat, zum Feststellen von Schäden an den Seilen aus Litzenbündeln angewendet. Neue Entwicklungen bei vollverschlossenen Seilen betreffen insbesondere die Korrosionschutzsysteme und die Ausführung der Ankerköpfe. In beiden Bereichen beschreibt der Bericht die Neuerungen. Bei den Instandsetzungen der vollverschlossenen Seile werden angespochen: dauerhafte Seilspreizung zur Verbesserung der Zugänglichkeit bei der visuellen Prüfung, Seilaustausch am Beispiel der Rheinbrücke Düsseldorf-Flehe und die Instandsetzung des Korrosionschutzes mit verschiedenen Methoden. Wegen der neueren technischen Entwicklungen entsprechen die derzeit gültigen einschlägigen Regelwerke teilweise nicht mehr dem Stand der Technik. Sie müssen daher überarbeitet oder gänzlich neu erstellt werden.
Im Oktober 2007 wurde die Rügenbrücke, eine der längsten Hochbrücken Europas, für den Verkehr freigegeben. Der Beitrag befasst sich mit den Erfahrungen, die bei Planung und Bau dieses bemerkenswerten Bauwerks gemacht wurden, insbesondere hinsichtlich der vielen bautechnischen Innovationen bei dem Schlüsselbauwerk des Brückenzuges, der 570 m langen Schrägseilbrücke über den Ziegelgraben. Eine der wesentlichen Erstanwendungen für Deutschland betraf die Ausführung der Schrägseile mit Litzenbündeln des Systems DYNA Grip der SUSPA DSI. Wegen des aus Gründen des Vogelschutzes erforderlichen Mindestdurchmessers der Seile von 12 cm waren vollverschlossene Seile aus ingenieurtechnischen und wirtschaftlichen Gründen benachteiligt, sodass sich der Bauherr für Seile aus Litzenbuendeln entschied. Die Schrägseilbrücke über den Ziegelgraben wird schon jetzt als modernes Wahrzeichen der Stadt Stralsund empfunden. Sie passt sich gestalterisch hervorragend in die Umgebung ein und beeinträchtigt auch nicht die zum Weltkulturerbe zählende Altstadt von Stralsund. Besonders besticht das Bauwerk durch seine Leichtigkeit und die Einpassung der Formen der Bauteile, zum Beispiel wegen der tropfenfoermigen Gestaltung des Pylons und der Pfeiler, in das maritime Umfeld. Da die verwendeten Schrägseil-Litzenbündel noch nicht allgemein bauaufsichtlich zugelassen sind, kam der Qualitätssicherung für die Seile in allen Stufen der Planung, Fertigung, Montage und Bauwerksprüfung eine herausragende Bedeutung zu. Der zugehörige Qualitätssicherungsplan wird im Bericht ausführlich mit den wesentlichen \"schrägseilspezifischen\" Maßnahmen beschrieben. Schwingungen und Ermüdungsbeanspruchungen der Seile durch Fahrverkehr und Wind liessen sich durch einen mehrstufigen, kontinuierlich verdichteten Planungsprozess unter Nutzung von Versuchsdaten und Messungen am Bauwerk wirkungsvoll beherrschen. Aus Sicht der Bauwerksprüfung bestanden anfänglich Bedenken wegen der Erreichbarkeit der bis in 80 m Höhe über dem Brückendeck gespannten Schrägseile und der nicht direkt zugänglichen Litzen innerhalb des Hüllrohres sowie der Verankerungen. Daher wurden alle verfügbaren Prüfverfahren für Schrägseile an der Rügenbrücke getestet. Daraus ergab sich eine Prüfmatrix aus Prüfverfahren, Prüfmittel und Prüfumfang für die gesamte Nutzungsdauer. Zusammenfassend wird festgestellt, dass bei der Ziegelgrabenbrücke Schrägseile aus Litzenbündeln eine den vollverschlossenen Seilen ebenbürtige Bauart darstellen.
Seilverspannte Brücken
(2008)
Der Beitrag behandelt den Entwurf, Besonderheiten der Berechnung und die Bemessung der beiden wichtigsten Bauarten seilverspannter Brücken, der echten Hängebrücke und der Schrägseilbrücke. Bei den Hängebrücken wird zunächst eingegangen auf die geschichtliche Entwicklung, die geprägt ist durch die im Zuge der Verbesserung des Stahls zunehmende Drahtfestigkeit. Anschliessend geht der Bericht ein auf: statisches System, Arten des Ueberbaus, Ausführung der Pylone, Kabel, Hänger und Widerlager. Analog zu den Hängebrücken ist der Beitrag bei den Schrägseilbrücken aufgebaut: geschichtliche Entwicklung, Haupttragwerke, Ueberbau, Pylone und Schrägseile. Hinsichtlich der Besonderheiten der Berechnung werden angesprochen: Anwendung der Theorie II. Ordnung und Betriebsfestigkeitsbeanspruchung. Erläutert wird auch die Montage sowohl der Hängebrücke als auch der Schrägseilbrücke in Wort und Bild.
Vorbemerkungen: Schwingungsanfällige Zugglieder im Sinnen dieser Regelungen sind Hänger und Schrägkabel als Seile oder Vollprofile von Schrägseilbrücken, Hängebrücken und Bogenbrücken. Nachfolgend werden Bemessungsregeln für Hänger von Bogenbrücken angegeben. Stählerne Hänger von Bogenbrücken sind schlanke Zugglieder zwischen der Fahrbahnplatte einer Brücke (bzw. dem Versteifungsträger) und dem darüber gespannten Bogen. Die Verbindung zwischen Hänger und Bogen bzw. Versteifungsträger erfolgt meistens über angeschweißte Anschlussbleche. Ermüdungswirksame Doppelspannungsamplituden, die je nach Häufigkeit und Intensität zu Rissbildung führen können, entstehen bei runden Hängern insbesondere durch wechselnde Verkehrsbelastung und wirbelerregte Querschwingungen, sowie in Einzelfällen auch durch Regen-Wind-induzierte Schwingungen. Rechteckige Hängerquerschnitte können durch Verkehrsbelastung und wirbelerregte Querschwingungen ermüdungsrelevant beansprucht bzw. durch Galloping zu instabilen Schwingungen angeregt werden. Die nachfolgenden Regelungen und Empfehlungen für eine dauerhafte Konstruktion und einen ermüdungssicheren Hängeranschluss wurden für Rundstahl- und Flachstahlhänger hergeleitet und sind folglich auf diese zu beziehen. Eine Übertragung auf andere Querschnittsformen kann zwar erfolgen, allerdings sind hierzu weitergehende Überlegungen bezüglich anzusetzender Kraftbeiwerte, Wirklängen und nachzuweisenden Frequenzbereichen notwendig.
Zur Situation der Verkehrserziehung in der Sekundarstufe der Schulen der BRD wurde eine Erhebung bei Schulleiter/innen, Lehrer/innen und Schüler/innen durchgeführt. Außerdem wurden vorliegende Lehrpläne, Unterrichtsmaterialien und Fort-/Weiterbildungsangebote für Lehrer/innen analysiert. Die Erhebung hat gezeigt, dass die Situation der Verkehrserziehung in der BRD sehr unterschiedlich ist. Folgende äußeren Einflussfaktoren wurden festgestellt: die Schulart, die Jahrgangsstufe, die Größe der Schule und die Bevölkerungsdichte. So ist die Situation der Verkehrserziehung an Hauptschulen, in der Jahrgangsstufe 9, an kleineren Schulen in ländlichen Gegenden wesentlich günstiger als in anderen Schulen. Verkehrserziehung spielt im Denken vieler Lehrkräfte keine wesentliche Rolle, sie sollte Experten vorbehalten sein (Polizei usw.). Insbesondere ist das mangelnde Interesse von Lehrkräften der Sekundarstufe II an der Verkehrserziehung nicht zu übersehen. Im Vergleich der Erhebungen von 1980 und 2002 wurde festgestellt, dass wenig Fortschritte in der Verkehrserziehung in der Sekundarstufe erreicht worden sind, von einer verbesserten Ausstattung der Schulen abgesehen. In der Verkehrserziehung in der Sekundarstufe überwiegen herkömmliche Unterrichtsmethoden. Sie findet meist im Klassenraum statt, seltener im Verkehrsraum selbst. Der Wissenstest zeigte gravierende Mängel bei den Verkehrskenntnissen der Schüler/innen. Die Einordnung verkehrserzieherischer Themen in die Lehrpläne ist in den Bundesländern sehr unterschiedlich, in einigen ist Verkehrserziehung in den Schulgesetzen verankert, somit in die Lehrpläne der Fächer eingebunden, in anderen existieren Erlasse zur Verkehrserziehung. Angebotene zentrale Fortbildungsveranstaltungen gelten meist den Dezernenten/innen der Schulämter und Führungskräften an den Schulen. Auch dienen sie der spezifischen Fortbildung des Lehrpersonals für Verkehrserziehung - oft in Kooperation mit externen Anbietern. Der Originalbericht enthält als Anhänge die verwendeten Fragebögen für die Erhebung, Pretest und Häufigkeitsauszählungen, ergänzendes Tabellenmaterial, Lehrplananalysen sowie Informationen zur Lehrerfortbildung in allen Bundesländern.
Immer wieder werden Straßenbaumaßnahmen geplant und realisiert, bei denen die Möglichkeiten der geltenden Technischen Regelwerke für eine verkehrssichere Gestaltung nicht ausgeschöpft werden. Zielsetzung des Forschungsvorhabens war es, Schulungsunterlagen zu entwickeln, die sowohl zur Qualifizierung von Sicherheitsauditoren als auch zur Weiterbildung von Planern geeignet sind. Die zu erstellenden Materialien sollen Planern und Auditoren das Erkennen von Defiziten sowie das Vermeiden von Planungsfehlern erleichtern. Neben verfügbaren Auditauswertungen Dritter und 315 von den Forschungsnehmern selbst erstellten Auditberichten wurden bestehende Schulungsunterlagen für Planer bzw. Sicherheitsauditoren auf ihren Umfang, ihre Inhalte und Konzepte hin ausgewertet. Die Festlegung der Schulungsmodule orientierte sich sowohl an den bereits in der Praxis angewendeten Curricula für die Auditorenausbildung als auch an der durchgeführten Auswertung vorhandener Auditberichte sowie der Analyse vorliegender Schulungsunterlagen. Die Schulungsmodule und deren Inhalte wurden im Arbeitsausschuss Sicherheitsaudit von Straßen vorgestellt und diskutiert. Sie sind bereits im Anhang 1 des im Druck befindlichen Merkblatts für die Ausbildung und Zertifizierung der Sicherheitsauditoren von Straßen (MAZS 2008) aufgenommen. Für die festgestellten Defizite der relevanten Entwurfselemente wurden auf Grundlage der Entwurfsregelwerke jeweils die sicherheitsrelevanten Aussagen und Entwurfslösungen herausgearbeitet und zugeordnet. Im Ergebnis wurde eine Material- und Beispielsammlung erstellt, die in den Schulungsunterlagen zu jedem Grundlagen- und Thematischen Modul auch entsprechende Beispielsequenzen zu jedem Modul beinhaltet. Diese sehr umfangreichen Schulungsunterlagen (Kap. 3) sind dem Bericht als DVD beigefuegt.
16% aller Verkehrstoten in Deutschland sind Motorradfahrer und die Anzahl stagniert auf diesem hohen Niveau. Daher ist eine Verbesserung der Fahrsicherheit von Motorrädern zwingend erforderlich. Im Pkw leisten aktive bzw. verstellbare Fahrwerksysteme einen positiven Beitrag zur Fahrsicherheit und helfen, Unfälle zu vermeiden. Hierzu zählen neben den Fahrdynamikregelsystemen wie ABS und ESP auch Verstelldämpfer und Stabilisatorverstellsysteme. Dämpfer- und Stabilisatorsysteme beeinflussen die dynamische Radlast und können insbesondere im ABS-Regelbereich die Fahrsicherheit erhöhen. Der Einfluss geregelter Dämpfersysteme auf die Fahrsicherheit und den Komfort im Pkw-Bereich ist in ausführlichen Untersuchungen sowohl theoretisch als auch praktisch belegt. Im Kraftradbereich existieren zwar Untersuchungen zu verstellbaren Dämpfersystemen, meist werden hier aber ausschliesslich komfortorientierte Kriterien betrachtet. Neben der Übertragbarkeit der positiven Effekte, die im Pkw-Bereich hinsichtlich Komfort und Fahrsicherheit durch geregelte Dämpfersysteme erreicht werden, auf Krafträder, ist der Einfluss geregelter Systeme auf die besonderen kraftradspezifischen Eigenschaften noch nicht ausführlich simulativ betrachtet worden. Das labile System Kraftrad, das in Abhängigkeit der Fahrgeschwindigkeit stark veränderliche Eigenschaften bezüglich der Eigenstabilisierung aufweist, neigt je nach Geschwindigkeitsbereich zu unterschiedlichem Verhalten. Die Zielsetzung dieser Arbeit liegt somit in der Überpruefung der Übertragbarkeit der aus dem Pkw-Bereich bekannten Einflüsse geregelter Dämpfersysteme auf Fahrkomfort und Fahrsicherheit im Kraftradbereich. Weiter soll hierbei auf kraftradspezifische Fahrsituationen eingegangen werden, die in der Pkw-Forschung auf Grund des abweichenden Systemverhaltens keine Berücksichtigung finden. Die Untersuchung gliedert sich in die Parameterermittlung anhand eines Versuchsmotorrades, die Erstellung und Validierung eines Mehrkörpersimulationsmodells unter Verwendung der Software VI Motorcycle fuer Adams/Car, die Definition, Auswahl und Umsetzung geeigneter Fahrmanöver sowie die Beurteilung des Sicherheitsgewinns. In der Simulationsumgebung VI Motorcycle (Adams/Car) wurden Schnittstellen geschaffen, um (semi-)aktive Fahrwerke einzubinden. Die entsprechenden Regelalgorithmen sowie die Umsetzung der Dämpferkonzepte wurden hierfür in Matlab/Simulink aufgebaut. Im Rahmen dieser Untersuchung wurden zahlreiche Regelalgorithmen und Dämpferkonzepte modelliert und getestet. Es wurde ein Fahrmanöverkatalog mit solchen Fahrversuchen erstellt, die Potenzial fuer einen Sicherheitsgewinn durch aktive Dämpfer erwarten lassen. Fuer die definierten Fahrmanöver wurden Simulationen aller entwickelten Regler und als Referenz auch eines passiven Dämpfersystems durchgeführt. Die Simulationsdaten wurden anhand vorab definierter Beurteilungskriterien ausgewertet. Die Ergebnisse lassen Potenzial zur Steigerung von Fahrsicherheit und Komfort vermuten. Die Erkenntnisse aus dem Pkw-Bereich koennen in weiten Teilen auf den Kraftradbereich übertragen werden. Ein signifikanter Einfluss auf das heutige Unfallgeschehen von Motorrädern ist jedoch als unwahrscheinlich einzuschätzen.
Um die Position der Verkehrs- und Mobilitätserziehung in den Schulen und vor allem in der Sekundarstufe zu stärken und den zuständigen Ministerien, Lehrerinnen und Lehrern und anderen Verantwortlichen vor Ort Einblick in die Fähigkeiten der Schüler zu geben, wurde von der Bundesanstalt für Straßenwesen (BASt) das Forschungsprojekt "Entwicklung von Evaluationsinstrumenten zur Erreichung von Standards in der Verkehrs- /Mobilitätserziehung der Sekundarstufe" an das Zentrum für Evaluation und Methoden (ZEM), Rheinische Friedrich-Wilhelms-Universität Bonn vergeben. Vorbereitet und begleitet wurde das Projekt von der Arbeitsgruppe BASt/ Kultusbehörden der Länder, die mit den Leistungsstandards und den inhaltlichen Schwerpunkten (Jahrgangsstufe 6: Fahrradfahren, Jahrgangsstufe 9/10: Vorbereitung auf die Teilnahme am motorisierten Straßenverkehr) wichtige Rahmenbedingungen vorgegeben hat. Im Rahmen des Projektes wurden zunächst auf umfassender empirischer Grundlage die Leistungsstandards als Kompetenzen und Items beschrieben. In einem weiteren Schritt wurde auf der Basis der Ergebnisse einer Machbarkeitsstudie ein computerbasiertes Evaluationsinstrument entwickelt, das Lehrern im Sinne eines Monitoringsystems Anhaltspunkte zur Ausprägung der Kompetenzen ihrer Schüler gibt. Ergebnisse werden Lehrern, aber auch Schülern unmittelbar nach der Durchführung des Verfahrens auf verschiedenen Ebenen zurückgemeldet. Das Instrument ist inhaltsvalide und weist zudem günstige Werte in konvergenter und diskriminanter Validität auf. Auch die Ergebnisse zur internen Konsistenz sind zufriedenstellend. Die Retest-Reliabilität des Instruments konnte allerdings nicht nachgewiesen werden. Das Instrument ermöglicht Lehrern, ihren Unterricht im Folgenden gezielt auf die Kompetenzen ihrer Schüler auszurichten und ihnen genau die Inhalte zu vermitteln, die sie noch nicht beherrschen. Dies gibt der schulischen Verkehrs- und Mobilitätserziehung eine neue, individuell auszurichtende Struktur und bietet Anreize, entsprechende Themen verstärkt in den Schulen zu verankern. Der Computertest dauert ca. eine Schulstunde und setzt durch seinen abwechslungsreichen Charakter neue Impulse in der Verkehrs- und Mobilitätserziehung. Das Evaluationsinstrument wurde so konzipiert, dass es an Schulen mit und ohne Computernetzwerk eingesetzt werden kann und in Bezug auf Grafik und Kapazitäten nur geringe Anforderungen an die Qualität der vorhandenen Rechner stellt. Eine Installation des Instrumentes ist nicht erforderlich. Fakultativ wurde darüber hinaus für die Schüler der Jahrgangsstufe 6 ein Fahrradparcours entwickelt, der den Lehrern einen Einblick dazu vermittelt, wie gut ihre Schüler verschiedene Situationen, die für den Straßenverkehr relevant sind, beherrschen. So können gezielt Hinweise dafür gesammelt werden, welche Themen im Unterricht aufgegriffen werden müssen, vor allem bevor, z.B. im Rahmen einer Klassenfahrt, die Schüler aktiv am realen Verkehr teilnehmen. Der Fahrradparcours ist innerhalb von zwei Schulstunden durchzuführen, zudem erfordert der Aufbau nur wenige Materialien. Insgesamt stehen mit Computertest und Fahrradparcours für Schüler sowie Lehrer ansprechende Instrumente zur Verfügung, die Einblicke in die Ausprägung der für eine sichere Teilnahme am Straßenverkehr erforderlichen Kompetenzen geben und Anhaltspunkte für die inhaltliche Ausrichtung der schulischen Verkehrs- und Mobilitätserziehung geben. Das Instrument kann dementsprechend im Sinne einer lokalen Lernstanderhebung zur Identifikation von Wissenslücken bei einzelnen Schülern, Klassen oder Schulen eingesetzt werden. Darüber hinaus besteht auch die Möglichkeit, im Sinne einer zentralen Lernstandserhebung die Daten der verschiedenen Klassen, Schulen und Länder für länder- und bundesweite Vergleiche zu sammeln, Stärken und Schwächen auf einem höheren Aggregationsniveau zu identifizieren und möglicherweise in einem weiteren Schritt im Sinne eines Input-Output-Vergleichs besonders effektive Maßnahmen der Verkehrserziehung und weitere relevante Rahmenbedingungen zu identifizieren. Welche Verwendung des Programms sich schließlich durchsetzen wird, liegt in der Hand der Länder.
Bei Wellstahlbauwerken handelt es sich um wirtschaftliche und dauerhafte Ingenieurbauwerke für die Unterführung von Verkehrswegen, die sich seit Jahrzehnten in der Anwendung bewährt haben. Hierbei werden wellprofilierte biegeweiche Stahlrohre in den Boden eingebettet und als Unterführungsbauwerke benutzt. Die Lastabtragung der eingebetteten biegeweichen Stahlrohre basiert auf einer Interaktion der Rohrschale mit dem umgebenden Boden und erfolgt deshalb hauptsächlich in Ringrichtung. Die Bemessung von Wellstahlbauwerken erfolgt in Deutschland derzeit gemäß den Allgemeinen Rundschreiben Straßenbau (ARS) Nr. 20/1997 und Nr. 12/1998. Die darin aufgeführten Bemessungsregeln stammen aus den 70iger Jahren und basieren auf der Veröffentlichung (KLÖPPEL & GLOCK, 1970). Diese Bemessungsregeln beruhen jedoch noch auf dem damals üblichen Globalsicherheitskonzepts für die Nachweisführung und genügen nicht mehr den Anforderungen der neuen europäischen Normengenerationen deren Sicherheitsphilosophie auf dem Teilsicherheitskonzept beruht. Im Zuge der nationalen Einführung der europäischen Bemessungsnormen (Eurocodes) im Straßenbau in Form der DIN-Fachberichte werden derzeit auch die bestehenden Bemessungsrichtlinien für Wellstahlbauwerke überarbeitet und sollen zukünftig in die Zusätzlichen Technischen Vertragsbedingungen und Richtlinien für Ingenieurbauten (ZTV ING, Teil 9, Abschnitt 4) aufgenommen werden. Neben allgemeinen Änderungen und Anpassungen der Einwirkungen wird bei der Überarbeitung hinsichtlich der Bemessung hauptsächlich die Umstellung der Nachweise vom Globalsicherheitskonzept auf das Teilsicherheitskonzept vollzogen. Durch diese Überarbeitung der bestehenden Richtlinien für Wellstahlbauwerke werden im Hinblick auf die Bemessung von Wellstahlbauwerken wesentliche Änderungen herbeigeführt, die eine genauere Betrachtung und ggf. Anpassung der Bemessungsrichtlinien erfordern. Im Rahmen dieses Forschungsvorhabens wurde daher auf Grundlage von vergleichenden Betrachtungen die Anwendung der neuen Bemessungsrichtlinien fuer Wellstahlbauwerke erprobt, sowie das vorliegende Sicherheitsniveau im Vergleich zu den bisher bestehenden Bemessungsrichtlinien für Wellstahlbauwerke überprüft. Der Schwerpunkt der durchgeführten Untersuchungen lag daher auf der Durchführung von umfangreichen Vergleichsberechnungen an unterschiedlichen Einbausituationen von Wellstahlbauwerken, anhand derer die Auswirkungen der Regelwerksumstellung aufgezeigt wurden. Ergänzend zu diesen Vergleichsberechnungen wurden separate Untersuchungen zum Nachweis der Schraubenverbindung und zum Nachweis am Schrägschnitt durchgeführt. Ferner wurde in Form von Stabwerksberechnungen nach Theorie II. Ordnung noch das Stabilitäts- und Beanspruchungsverhalten von Wellstahlbauwerken mit großen Spannweiten untersucht. Auf Grundlage der durchgeführten Untersuchungen und Vergleichsberechungen konnten für Wellbauwerke nachfolgende wesentliche Erkenntnisse und Empfehlungen für die weitere Überarbeitung des Regelwerks abgeleitet werden: - Mit Ausnahme des Nachweises "Durchschlagen des Bauwerksscheitel für h/s < 0,7" führt die vorgenommen Umstellung des Nachweiskonzepts zu keinen wesentlichen Änderungen des Sicherheitsniveaus. Für diesen Nachweis wird empfohlen, auch zukünftig das höhere Sicherheitsniveau für gedrungene Querschnittsformen mit h/s < 0,7 aufrecht zu erhalten. - Die Anpassung bzw. Erhöhung der Verkehrslast von 45 kN/m2 auf 65 kN/m2 führt mit Ausnahme des Nachweises "Grundbruch im Scheitel" lediglich zu einer effektiven Vergrößerung der Beanspruchung von max. 13%. Dies begründet sich in erster Linie durch den Wegfall des Schwingbeiwertes im neuen Regelwerk. - Bezüglich der Schraubenverbindung wird empfohlen, die Festlegung der Tragfähigkeit gemäß den europäisch harmonisierten Regeln in DIN EN 1990:2002 durchzuführen. - Beim Nachweis "Grundbruch im Scheitel" kommt es infolge der Umstellung des Regelwerks zu größeren Änderungen des Sicherheitsniveaus, das in erster Linie das Ergebnis der Nachweisführung selbst und der Lastanpassung ist. Will man wie bei allen anderen Nachweisen, das bestehende Sicherheitsniveau beim Übergang vom alten ins neue Regelwerk weitestgehend aufrecht erhalten, so sind weitere Maßnahmen erforderlich. - Es wird empfohlen den im alten Regelwerk festgelegten Anwendungsbereich bzgl. der Spannweite und der Überdeckung auch im neuen Regelwerk bei zu behalten.
Ziel des vorliegenden Forschungsvorhabens ist die Erarbeitung weitergehender Anforderungen an elektroakustische Anlagen in Straßentunneln unter Beachtung der technischen und wirtschaftlichen Umsetzbarkeit. Hierzu sind allgemeingültige Kriterien zu definieren, anhand derer eine elektroakustische Beschallungsanlage für Tunnel ausgelegt werden kann, ohne dass aufwändige schalltechnische Einzeluntersuchungen durchgeführt werden müssen. Aus den bereits vorliegenden Projekten wurden Ergebnisse schalltechnischer Untersuchungen aus 19 Tunneln kategorisiert und vergleichend gegenübergestellt. Es wurden folgende wesentliche Erkenntnisse gewonnen: - Die Nachhallzeiten liegen im Bereich von 5 s bis 10 s, im mittleren Bereich und für tiefe Frequenzen ansteigend bis auf 27 s. Die Nachhallzeiten typischer Tunnel unterscheiden sich nur unwesentlich. - Nachhallzeitmessungen sind daher nicht notwendig. Wichtig ist die Beurteilung der Primärstruktur eines Tunnels. - Es gibt besondere Schallleitungseigenschaften von Tunnelröhren, die durch die Reflektionen entstehen. Diese Struktur zeichnet sich durch nützliche Schallreflexionen aus, die sich für eine Sprachverständlichkeit fördernde Unterstützung nutzen lassen. Daraus lassen sich folgende akustische Anforderungen an einen für Tunnelbeschallungen geeigneten Lautsprecher formulieren: - horizontale und vertikale Abstrahlwinkel von etwa jeweils 30 bis 35-°, - Rückwärtsdämpfung von ARueck ≥ 30 dB, - Schalldruckpegel Lpmax ≥ 130 dB(SPL), - Übertragungsfrequenzgang 300Hz bis 12000 Hz. Auf Grund dieser Erkenntnisse werden Versuche in einem zur Verfügung gestellten Testtunnel mit auf dem Markt befindlichen Lautsprechersystemen durchgeführt, was zu folgenden Aussagen für die Konzeption einer Beschallungsanlage führt: - Herkömmliche Lautsprecher sind für eine Beschallung mit Sammelruf ungeeignet. - Ein nach dem Prinzip des Grenzflächenhorns entwickelter Speziallautsprecher hatte geeignete akustischen Eigenschaften. - Die Lautsprecher müssen zeitlich angepasst werden. - Eine Sprachverständlichkeit von mindestens STI ≥ 0,45 ist anforderungsgerecht. Bei Messungen in Tunneln, deren Beschallungsanlagen unter Berücksichtigung der im Forschungsvorhaben gewonnenen Erkenntnisse ausgelegt wurden, werden Sprachverständlichkeitswerte mit im Mittel STI = 0,52, 0,50 und 0,49 festgestellt. Der Originalbericht enthält als Anhang "Generalisierte Muster-Ausschreibungs-Module für ein SLASS-Beschallungssystem " Erläuterungsbericht / Technische Vorbemerkungen / Leistungs-Positionstexte". Er steht ebenfalls als Download zur Verfügung.
Zur Erhöhung des Verformungswiderstandes von Asphaltbefestigungen ist eine Vielzahl von Produkten entwickelt worden, welche dem Bitumen erst an der Mischanlage zugegeben werden können. Da deren Praxisverhalten aber oftmals noch nicht hinreichend bekannt ist, wurde auf einem Streckenabschnitt der BAB 1 bei Euskirchen eine Versuchsstrecke zur Erprobung der Additive eingerichtet. Fazit nach vier Jahren Nutzungsdauer ist, dass die untersuchten Produkte in Verbindung mit einem nicht-modifizierten Straßenbaubitumen grundsätzlich als vergleichbare Bindemittelalternative verwendbar sind. Die separate Zugabe an der Mischanlage hat jedoch i. a. einen höheren Aufwand zur Folge, so dass der Einsatz sich insbesondere für Sonderanwendungen (z. B. Kleinmengen oder Mischgut mit höherer Modifizierung) eignet. Für die Anwendungen wird eine objektbezogene, aussagekräftige erweiterte Eignungsprüfung als zwingend notwendig angesehen. Bei großflächigen Anwendungen sollte aufgrund der noch nicht eindeutig dokumentierten gleichmäßigen Verteilung der Produkte und des noch fehlenden quantitativen Nachweises den gebrauchsfertigen PmB der Vorzug gegeben werden. Außerdem wird darauf hingewiesen, dass die Erprobungsfelder zwar in einem Autobahnabschnitt der Bauklasse SV liegen, die Verkehrsbelastung aber noch deutlich unter den besonders hoch belasteten Autobahnabschnitten in Nordrhein-Westfalen liegt. Auf der Erprobungsstrecke ist somit die Gefahr einer vergleichsweise schnellen Spurrinnenbildung nicht besonders hoch.
Aktuell werden Brücken intensiv in festgelegten Zyklen untersucht, wodurch hohe Kosten entstehen, jedoch das Zusammenwirken der Konstruktionsteile und Systemabhängigkeiten nur unzureichend berücksichtigt werden. Durch eine risikobasierte Bauwerksprüfung ist es möglich, den Prüfumfang jeder Bauwerksprüfung auf Basis wissenschaftlich basierter Risikobetrachtungen auf Schadensebene festzulegen und nur bei Vorliegen einer entsprechenden Schädigungswahrscheinlichkeit zu prüfen. Hierzu wird das betrachtete Bauwerk mithilfe mehrerer Untergliederungsebenen bis zu den möglichen Schäden aufgegliedert. Für sämtliche Schäden werden auf Grundlage mechanischer oder physikalischer/chemischer Überlegungen Schädigungsmodelle definiert und für alle Schäden verschiedene Schädigungsniveaus, bezogen auf die Auswirkungen auf die Standsicherheit, Verkehrssicherheit und Dauerhaftigkeit, festgelegt. Durch eine Darstellung der Schäden mittels probabilistischer Modelle, lässt sich die Wahrscheinlichkeit, dass ein Schaden ein bestimmtes Schädigungsniveau erreicht, errechnen. Wenn die Wahrscheinlichkeit, dass ein Schaden ein bestimmtes Schädigungsniveau erreicht hat, eine zugehörige Grenzwahrscheinlichkeit erreicht, ist eine Bauwerksprüfung zur Bestätigung dieses Schadensniveaus durchzuführen. Es wird eine Systematik vorgeschlagen, die für jedes Schädigungsniveau, die Ermittlung der Grenzwahrscheinlichkeit ermöglicht. Durch die Bauwerksprüfung kann der tatsächliche Bauwerkszustand festgestellt und die Schädigungsprognose durch Einbezug dieser Erkenntnisse in die Schädigungsmodelle, angepasst werden. Durch das vorgeschlagene Modell ist es möglich, beim Umfang der Bauwerksprüfung den tatsächlichen und den prognostizierten Bauwerkszustand zu berücksichtigen. Die für die Bauwerksprüfung bereitstehenden Mittel lassen sich effizienter einsetzen und "Schwachpunkte" eines Bauwerks werden gemäß ihrer Schädigungswahrscheinlichkeit häufiger geprüft.
Die für die Bemessung von Neubauten maßgebenden DIN-Fachberichte mit dem darin enthaltenen Sicherheitskonzept sind nicht geeignet, die tatsächliche Tragsicherheit bestehender älterer Spannbetonbrücken zu beurteilen. Die seinerzeit für die Bemessung und Konstruktion gültigen Normen wurden sowohl was die Einwirkungsseite als auch was die Widerstandsseite betrifft ständig weiterentwickelt und an neue hinzugewonnene Erkenntnisse angepasst. Dies hat zwangsläufig zur Folge, dass sich bei der Nachrechnung älterer Bestandsbrücken auf der Grundlage neuerer Normen die höhere Anforderungen beinhalten, häufig keine Nachweise mit normgemäßen Sicherheitsfaktoren führen lassen. Im Rahmen des FE-Vorhabens wurde objektbezogen an zwei Brücken untersucht, welche möglichen Tragreserven sich unter Einbeziehung des Entwurfs der Nachrechnungsrichtlinie identifizieren lassen. Die betrachteten Talbrücken Lützelbach (Hohlkasten) und Volkersbach (Plattenbalken) waren zuvor bereits normgemäßen Nachrechnungen unterzogen worden, bei denen sowohl im Grenzzustand der Gebrauchstauglichkeit, wie auch im Grenzzustand der Tragfähigkeit Defizite festgestellt wurden. Unter anderem wurden gegenüber dem für Neubauten konzipierten Sicherheitskonzept modifizierte Teilsicherheitsbeiwerte für die Besonderheiten bei der Nachrechnung des Bestands in Ansatz gebracht. Für die realitätsnahe Ermittlung der jeweiligen Tragwiderstände wurden alternative und genauere Verfahren auf ihre Eignung hin untersucht und in Ansatz gebracht. Die Tragwerke wurden in größerem Umfang als allgemein üblich auf Umlagerungsmöglichkeiten und Systemredundanzen hin untersucht. Insgesamt kann festgestellt werden, dass bei Anwendung eines für die Nachrechnung bestehender Bauwerke angepassten Sicherheitskonzepts und geeigneter alternativer Nachweisverfahren, Tragreserven bei den beiden betrachteten Brückenbauwerken identifiziert und genutzt werden können. Die bei normgemäßen Nachrechnungen festgestellten Defizite konnten in weiten Bereichen reduziert oder sogar ganz aufgehoben werden. Ein hoher Aufwand bei der Nachrechnung bestehender Brückenbauwerke scheint zielführend und gerechtfertigt, vor allem wenn sich dadurch der noch höhere Aufwand für Planung und Ausführung von Verstärkungsmaßnahmen vermeiden lässt.
Der Straßenverkehr ist in den letzten Jahrzehnten in Deutschland und Europa stetig angestiegen und aktuelle Verkehrsprognosen zeigen eine Fortsetzung dieses Trends. Für die Ermittlung des aktuell gültigen Lastmodells wurden umfangreiche Verkehrslastmessungen in verschiedenen europäischen Ländern durchgeführt. Auf Basis von neueren Verkehrserhebungsdaten wurde im Rahmen des Forschungsprojektes FE 15.451/2007/FRB ein zukunftsfähiges Lastmodell für den Neubau von Straßenbrücken entwickelt. Das Ergebnis führte zu Erhöhungen der Anpassungsfaktoren für das Lastmodell 1 im DIN Fachbericht 101. Durch die Anwendung dieses neuen Lastmodells ist bei neu zu planenden Brücken der erwartete zukünftige Schwerverkehr angemessen berücksichtigt. Die bestehenden Ingenieurbauwerke im Straßennetz wurden auf Basis der zum Errichtungszeitpunkt gültigen Normen und Regelungen erstellt. Für Brücken im Bundesfernstraßennetz wurden dabei bis zur Einführung der DIN-Fachberichte das Lastmodell \"BK60/30\" der DIN 1072 (12-1985) und vor 1985 das Lastmodell \"BK60\" der DIN 1072 (06-1967) verwendet. Für Ingenieurbauwerke im Zuge von weniger frequentierten Straßennetzen wurde auch das Lastmodell \"BK30/30\" der DIN 1072 (12-1985) bzw. \"BK30\" der DIN 1072 (06-1967) angewendet. Außerdem können die Bauwerke, die vor 1985 erstellt wurden, aufgrund der für die Errichtung verwendeten Entwurfs- und Bemessungsregeln systematische Schwachstellen aufweisen. Die Forschungsergebnisse zeigen, dass die zu erwartenden zukünftigen Einwirkungen aus dem Schwerverkehrsaufkommen durch die Lastmodelle der älteren Normengeneration nur bedingt abdeckt sind. Die Defizite der Lastannahmen und der angewandten Konstruktionsgrundsätze erfordern eine aktuelle Überprüfung der Bauwerke hinsichtlich ihrer Tragfähigkeit. Bei vorhandenen Mängeln sind Ertüchtigungsmaßnahmen erforderlich. In Anbetracht des zahlenmäßigen Umfanges dieser Bauwerke im deutschen Straßennetz sind weder Ertüchtigungsmaßnahmen noch Ersatzneubauten kurzfristig möglich. Im Rahmen des Forschungsprojektes soll daher ermitteltet werden, unter welchen Bedingungen die Einwirkungen aus dem aktuellen Verkehrsaufkommen durch die Lastmodelle älterer Normengenerationen abgedeckt werden. Hierzu werden zum einen unterschiedliche Verkehrsaufkommen und unterschiedliche Verkehrszusammensetzungen betrachtet und andererseits zusätzliche Kompensationsmaßnahmen für das Verkehrsaufkommen. Des Weiteren wird untersucht, wie sich reduzierte Restnutzungsdauern auf die Ergebnisse auswirken. Die vorliegenden Untersuchungen sind dabei unterteilt in Betrachtungen für das Bundesfernstraßennetz und das untergeordnete Straßennetz (Landstraßen, Kreisstraßen usw.). Für das Bundesfernstraßennetz wird dabei nachfolgend, differenziert für verschiedene Verkehrsstärken, ermittelt, welches der betrachteten Lastmodelle die Einwirkungen aus dem aktuellen Verkehrsaufkommen ohne zusätzliche Kompensationsmaßnahmen abdeckt. Anschließend wird ermittelt, für welches Lastmodell (LM 1, BK 60/30, BK60) welche zusätzlichen Kompensationsmaßnahmen erforderlich sind, um ebenfalls die Einwirkungen aus dem aktuellen Verkehrsaufkommen abzudecken. Die betrachteten Kompensationsmaßnahmen sind dabei eine Abstandsbeschränkung im fließenden Verkehr, ein Lkw-Überholverbot und die Einschränkung des genehmigungspflichtigen Großraum- und Schwerlastverkehrs ohne Routenbeschränkung oder mit Dauergenehmigung. Für das untergeordnete Straßennetz werden verschiedene Verkehrscharakteristiken betrachtet (Langstreckenverkehr, Mittelstreckenverkehr, Ortsverkehr). In Abhängigkeit der Verkehrscharakteristik und des Verkehrsaufkommens wird auch hier bestimmt, welches der betrachteten Lastmodelle das aktuelle Verkehrsaufkommen abdeckt. Die Ergebnisse der Untersuchungen werden detailliert dargestellt und zu einer Empfehlung für die aktuell in Erarbeitung befindliche Nachrechnungsrichtlinie zusammengefasst. Die Zusammenstellung von Ansätzen für weiterführende Untersuchungen bildet den Schluss des vorliegenden Berichtes.
Ziel des Forschungsvorhabens war die Klärung der Frage, in welcher Art und Weise Einsatz und Betrieb des RQ 21 in dem Entwurf der RAL geregelt werden soll. Im Vordergrund stand die Entwicklung einer Methodik zur Abgrenzung der Einsatzlänge von Strecken mit RQ 21 unter Berücksichtigung des Verkehrsablaufs und der Verkehrssicherheit. Dabei sollte die mögliche Notwendigkeit einer Beschränkung der V(Index zul) im Vergleich zu Strecken mit Seitenstreifen erläutert werden. Weiterhin galt es zu klären, wie eine Bewertung der Verkehrsqualität auf diesem Regelquerschnitt erfolgen soll. Zunächst erfolgte eine Dokumentation von Strecken aus verschiedenen Bundesländern, um die Charakteristik bestehender Strecken im Netz zu quantifizieren. Anhand einer Voruntersuchung wurden die Kriterien für Lage und Umfang der verschiedenen Messquerschnitte festgelegt. Erhebungen zur Analyse des Fahrverhaltens wurden im Bereich der freien Strecke und an Übergängen mit verschiedenen Änderungen der Streckencharakteristik durchgeführt. Das auf Strecken mit verschiedenen Geschwindigkeitsbeschränkungen (V(Index zul)) erfasste Geschwindigkeitsverhalten wurde in q-V-Beziehungen dargestellt und für verschiedene verkehrliche Randbedingungen mittels Simulationen für den vorgesehenen Verkehrsstärkebereich abgebildet. Die Untersuchungen zeigten für Streckenzüge des RQ 21 gegenüber dem RQ 28 einen ungünstigeren Sicherheitsgrad Unfallkostenrate (UKR) wegen erhöhter \"Rate der Unfälle mit Personenschaden\" (UR(P)). Es wurde ein Ansatz entwickelt, der in Abhängigkeit der verkehrlichen und baulichen Parameter einer Strecke die mittlere Anzahl von Störungen, die auf Strecken ohne Seitenstreifen gegenüber den Strecken mit Seitenstreifen mehr auftreten, angibt. Die Empfehlungen zur Begrenzung der Einsatzlänge des RQ 21 auf eine Länge von 15 km sind das Resultat dieses Ansatzes. Grundsätzlich gilt, dass der Einsatz und Betrieb des RQ 21 an enge Rahmenbedingungen gekoppelt ist, deren Einflüsse in diesem Forschungsprojekt näher beschrieben sind.
Ziel des Forschungs- und Entwicklungsvorhabens war es, für bauliche Engstellen in Ortsdurchfahrten geeignete Lösungsansätze abzuleiten. Die verschiedenen erhobenen Entwurfslösungen an Engstellen wurden insbesondere bezüglich der verkehrlichen Aspekte (Verkehrsablauf, Verkehrssicherheit, straßenverkehrsrechtliche Einordnung) und der städtebaulichen Aspekte untersucht. Resümierend kann festgehalten werden, dass verkehrlich und gestalterisch gute Lösungen bewusste Entscheidungen auf Grundlage der örtlichen Gegebenheiten verlangen. So müssen Engstellen gut erkennbar, begreifbar und eindeutig ausgeführt sein. Im Rahmen des Vorhabens wurden Entwurfs- und Abwägungsgrundsätze aufgestellt und Ausstattungselemente beschrieben, die in die Weiterentwicklung des Regelwerks einfließen können. So sollte die Ausbildung von Engstellen mit Borden ohne Begegnungsverkehr (3,50 m Fahrbahnbreite) der Standardfall sein. Engstellen ohne Begegnungsverkehr sind bis zu 400 Kfz/h (Länge bis zu 50 m) ohne Signalisierung und bis zu 1.200 Kfz/h (Länge bis zu 300 m) mit Signalisierung problemlos zu betreiben. Ausbildungen ohne Begegnungsmöglichkeit sind eventuell bei Verkehrsmengen zwischen 400 und 800 Kfz/h ebenfalls möglich. Verkehrsmengen, die an diese Belastungsgrenzen heranreichen, können hohe Halteraten verzeichnen. In solchen Fällen sollte im Einzelfall entschieden werden, ob die betreffenden Engstellen ohne oder mit Begegnungsverkehr zu regeln sind. Bei Verkehrsbelastungen über 1.200 Kfz/h sind Lösungen mit Begegnungsverkehr zu wählen. Das Mindestmaß für Fahrbahnen mit Begegnungsverkehr liegt unter der Voraussetzung eines geringen Schwerverkehrsanteils bei 4,50 m.
Transportable Schutzeinrichtungen werden in Deutschland im Bereich von Autobahnbaustellen eingesetzt, um entgegengesetzt gerichtete Verkehrsströme zu trennen und Arbeitsstellen gegenüber dem laufenden Verkehr zu sichern. Bei schweren Unfällen kann es erforderlich werden, dass Schutzeinrichtungen geöffnet werden müssen, um den Rettungskräften den Zugang zur Unfallstelle zu erleichtern. Die deutschen Regelwerke sehen bislang keinen Einsatz von Notöffnungsmöglichkeiten in transportablen Schutzeinrichtungen vor. Ziel des Projektes war es, zu ermitteln, ob und wo durch die Verwendung von Öffnungsmöglichkeiten die Zugänglichkeit zum Unfallort erleichtert werden kann. Im zweiten Schritt sollten Vorgaben für eine einheitliche Gestaltung von Notöffnungen erarbeitet werden, die mit den marktgängigen Schutzeinrichtungen umsetzbar sind, und die es den Einsatzkräften ermöglichen, ohne Vorkenntnisse und ohne Werkzeuge die Öffnungen schnell und einfach zu bedienen. Dazu sollten sowohl Verschlussmechanismen wie auch eine visuelle Kennzeichnung betrachtet werden. Die Untersuchungen haben gezeigt, dass Notöffnungen mit sehr vielen marktgängigen Schutzeinrichtungen realisiert werden können. Das größte Problem bei der Umsetzung stellt für die meisten Systeme das hohe Eigengewicht der Elemente dar. Von einer grundsätzlichen Verwendung von Notöffnungen an Arbeitsstellen auf Autobahnen ist abzuraten. Jedoch können unter bestimmten Voraussetzungen, die in einem Kriterienkatalog zusammengefasst wurden, durch den Einsatz von Notöffnungen die Zugriffsmöglichkeiten bei Unfällen verbessert werden. Aus Gründen der Verkehrssicherheit empfiehlt es sich, Notöffnungen jeweils am Beginn und am Ende einer Baustelle zu platzieren. Sind zusätzliche Öffnungspunkte dazwischen erforderlich, muss sehr gut abgewägt werden zwischen dem Faktor Zeitgewinn und dem erhöhten Risiko für Einsatzkräfte und den nachfolgenden Verkehr.
Zur Verbesserung der Wirtschaftlichkeit des Straßenbetriebsdienstes haben Bund und Länder gemeinsam einen Maßnahmenkatalog erarbeitet. Der überarbeitete Teil MK 11 dieses Maßnahmenkataloges "Baukonzeption für Autobahn- und Straßenmeistereien " Richtlinie für die Anlage von Meistereien (RAM)" enthält Planungs- und Gestaltungsgrundsätze für den Neubau von Meistereigehöften. Die Anordnung der zur Meisterei gehörenden Gebäude ist nach MK 11 so zu planen, dass niedrige Baunutzungskosten und Betriebsabläufe mit kurzen Wegen entstehen. Das Forschungsprojekt diente der Konkretisierung dieser Aussage und sollte, ausgehend von empirisch gewonnenen Fakten über Arbeitsabläufe, Arbeitswege und Tätigkeitsschwerpunkte, realisierungsfähige Möglichkeiten für eine prozessorientierte Arbeitsorganisation auf den Gehöftflaechen aufzeigen. Daraus sollten konkrete Lösungsvorschläge für eine optimale Gehöftflächenzuordnung und eine verbesserte Gebäudeausstattung entwickelt werden. Bei den hierfür notwendigen Untersuchungen sollten auch ergonomische Gesichtspunkte beachtet werden. Nach einer Literaturanalyse wurden in 15 Meistereien Grobanalysen und in 10 Meistereien Feinanalysen durchgeführt. Durch die Grobanalyse konnten alle auf dem Gehöft einer Meisterei anfallenden Aufgaben systematisch in Aufgabenbereiche (und Teilaufgaben) eingeteilt werden. Die Aufgabenbereiche wurden in Kern-, Führungs- und Unterstützungsprozesse klassifiziert. Durch die Feinanalyse konnten für alle Aufgabenbereiche Optimierungspotenziale und Ansatzpunkte für Verbesserungen hinsichtlich der Arbeitsplatzgestaltung und für die Kernprozesse (Arbeitsvor- und -nachbereitung sowie Wartung und Pflege) zusätzlich hinsichtlich der Arbeitsabläufe und teilweise der Arbeitsmittel aufgedeckt werden. Verallgemeinerte Empfehlungen für die Neuplanung von Meistereien werden in einem Rahmenprogramm für die Gehöftgestaltung gegeben. Das Rahmenprogramm enthält fünf Teile: - Gebäudeprogramm (Ausrichtung am MK 11, enthält weiterführende Gestaltungshinweise für die Gebäude), - Beispiellösungen für die Fahrzeughallen (Grundrisse mit einer Kurzbeschreibung der jeweiligen charakteristischen Merkmale), - Beispiellösungen für den Winterdienst (Grundrisse mit einer Kurzbeschreibung der jeweiligen charakteristischen Merkmale), - Checkliste für die Gehöftflächenzuordnungen bei der Planung von neuen Meistereien (Hilfsmittel für die Planung von zukünftigen Meistereien, enthält Anforderungen bezüglich der Anordnung der Gebäude und Gebäudeteile), - Beispiellayouts für Gehöftflächenzuordnung. Ein weiteres Projektergebnis ist eine vergleichende Betrachtung verschiedener Techniken zum Beladen und Betanken von Winterdienstfahrzeugen. Dabei wurden die Beladungssysteme Radlader, Silo und Brückenkran zeitlich untersetzt und miteinander verglichen. Darauf aufbauend wurde ein Tool für die Bestimmung von Beladezeiten für Radlader und Silo entwickelt, welches dem Nutzer ermöglicht, Eingangsgrößen selbst festzulegen. Das Tool kann als Hilfe bei der Planung von neuen Meistereien und bei der Umgestaltung bestehender Meistereien verwendet werden. In einer Sammlung zu Positivbeispielen werden Lösungen für den Betrieb von Meistereien vorgestellt, die in einzelnen Meistereien bereits vorhanden sind und sich in der Praxis bewährt haben. Zusammenfassend kann gesagt werden, dass neben kurzen Wegen auch andere Faktoren eine Rolle für schnelle und zielgerichtete Prozesse spielen, wie z. B. Ordnung und Sauberkeit auf dem Gelände, Verkehrsflächenkennzeichnung und -freihaltung, Einrichtung von festen Arbeitsplätzen, Zugänglichkeit von Arbeitsmitteln, ausreichend tiefe Fahrzeughallen mit Toren auf zwei Seiten. Auf all diese Faktoren wird in den Projektergebnissen Bezug genommen.
Zur Erkennung und Beurteilung von Straßenschäden werden derzeit Bilder der Fahrbahnoberfläche erfasst und anhand eines Schadenskataloges bewertet. Die Auswertung der Aufnahmen wird bislang manuell durchgeführt, wodurch es zu unterschiedlichen Beurteilungen kommen kann. Um eine einheitliche Auswertung zu garantieren, soll im Rahmen des Forschungsprojektes eine Software zur teilautomatischen Merkmalssuche und -analyse von Oberflächenschäden entwickelt werden. Im vorangegangenen Projekt (FE 89.190/2007/AP) wurde bereits die Machbarkeit eines solchen Systems analysiert. Um die praktische Anwendbarkeit eines solchen Assistenzsystems untersuchen zu können, soll ein Arbeitsplatzrechner eingerichtet und mit einer entsprechend zu entwickelnden Software ausgerüstet werden. Des Weiteren ist zu untersuchen, inwiefern eine Bewertung der Oberflächenschäden automatisiert werden könnte. Es soll weiter untersucht werden, inwieweit die detektierten Merkmalsklassen ausgeweitet (das heißt Schadensmerkmale klassifiziert) werden können.
In der öffentlichen Berichterstattung und in einschlägigen Gremien ist das Thema "Kleintransporter" immer wieder Gegenstand der Behandlung. Kleintransporter vereinen die Kapazität von kleinen Güterkraftfahrzeugen mit der Flexibilität und Leistungsfähigkeit von Pkw. Zum Führen dieser Fahrzeuge wird dabei lediglich die normale Pkw-Fahrerlaubnis benötigt. Obwohl das Unfallrisiko von Kleintransportern immer noch höher ist als das für Pkw, kann festgestellt werden, dass sich der starke Anstieg der Unfallanzahlen dieser Fahrzeuge trotz weiterhin steigender Bestandszahlen nicht weiter fortgesetzt hat. Mit dem hier durchgeführten Forschungsvorhaben wurde das Ziel verfolgt, die Maßnahmen und Qualifizierungsprogramme zur Erhöhung der Verkehrssicherheit von Kleintransportern in den zurückliegenden Jahren und auch solche Maßnahmen, die zukünftig geplant sind, umfassend zu erheben. Für solche Maßnahmen, die bereits realisiert worden sind, sollte festgestellt werden, inwiefern und in welchem Maße sie Anwendung finden. Die Grundlage des Forschungsvorhabens bildeten neben einer Literaturrecherche insbesondere empirische Untersuchungen. Diese wurden in Form von mündlich-persönlichen Befragungen mit Fahrern, Maßnahmenträgern, Unternehmen, Fahrzeugherstellern und Vermietunternehmen geführt. Insgesamt konnten im Rahmen des Vorhabens 116 Personen befragt werden. Wie die Fahrerbefragung gezeigt hat, verfügen die Befragten im Allgemeinen über keine spezifische Qualifikation in Bezug auf das Führen eines Kleintransporters. Die Ausgangsbasis bildet in aller Regel die Fahrerlaubnis der Klasse B bzw. Klasse 3 (alt). In den vergangenen fünf Jahren hat lediglich jeder zweite Fahrer eine Schulung besucht. Mit einem Anteil von rund 40% sind Übertretungen von Verkehrsvorschriften durch zu schnelles Fahren der häufigste Grund von Beanstandungen. Weitere Defizite wurden in Zusammenhang mit dem Thema Ladungssicherung deutlich. Aus Sicht von Maßnahmenträgern sind die Gründe für die insgesamt geringe Teilnahme von Fahrern an Weiterbildungsmaßnahmen unterschiedlich. So ist festzustellen, dass im Bereich des Kurier-, Express und Post/Paketdienstes aufgrund der engen Einbindung des Fahrpersonals in den logistischen Leistungsprozess häufig keine Freiräume bleiben, dem Fahrpersonal eine Schulung zu ermöglichen. Hinzu kommen wirtschaftliche Zwänge der Branche. Dennoch werden von Unternehmen des Kurier-, Express- und Post/Paketdienstes verschiedene Seminare angeboten und durchgeführt. Es hat sich gezeigt, dass vor allem der Ladungssicherung ein besonderer Stellenwert beigemessen wird. Hier sehen die Unternehmen einen wichtigen Ansatzpunkt für Verbesserungsmaßnahmen, wobei es hier in erster Linie um die Senkung der Schadensquote bezogen auf das Packstück geht, d.h. die Vermeidung bzw. Senkung von Kundenreklamationen, und weniger um den Aspekt der Verkehrssicherheit. Auch im Handwerk sind Maßnahmen zur Verbesserung der Verkehrssicherheit von Kleintransportern in Angriff zu nehmen. Die Fahrzeugsicherheit ist aus Sicht der Hersteller von zentraler Bedeutung. So hat sich die sicherheitsbezogene Ausstattung der Kleintransporter in den vergangenen Jahren stetig verbessert. Kleintransporter verfügen heute bereits serienmäßig über eine Vielzahl an allgemeinen sicherheitsbezogenen Ausstattungskomponenten. In Bezug auf die laderaumbezogene Sicherheitsausstattung werden insbesondere kundenspezifische Wünsche berücksichtigt. Auch die Durchführung von Kundenschulungen ist für die Hersteller ein wichtiges Anliegen. Betrachtet man die Zahlungsbereitschaft der Kunden, so hat sich gezeigt, dass in vielen Fällen die Kunden allerdings nicht bereit sind, für die fahrzeugspezifische Verkehrssicherheit einen höheren Kaufpreis zu entrichten. Ungeachtet dessen wird sich nach Einschätzung der Fahrzeughersteller die Verkehrssicherheit in Zukunft durch neue technische Lösungen weiter erhöhen. Aus Sicht der Vermietunternehmen hat sich die aktive und passive Sicherheitsausstattung der Kleintransporter in den vergangenen 10 Jahren stark verbessert, was sich zum Teil auch auf die Kaufentscheidung der Vermietunternehmen ausgewirkt hat. So sind bspw. bei der Kaufentscheidung neben den Anschaffungskosten durchaus Attribute wie Fahrzeugsicherheit und Langlebigkeit von zunehmender Bedeutung. Als problematisch wird das Privatkundengeschäft eingestuft. Für diesen Personenkreis ist die sicherheitsbezogene Ausstattung von Kleintransportern bislang ohne Bedeutung. Eine Verbesserung der Verkehrssicherheit von Kleintransportern ist in Zukunft nur dann zu erreichen, wenn allen Akteuren bewusst wird, dass das Fahren mit einem Kleintransporter nicht unmittelbar vergleichbar ist mit dem Fahren eines Pkw. Insgesamt ist festzustellen, dass Maßnahmen zur Verbesserung der Verkehrssicherheit von Kleintransportern langfristig anzulegen sind und insbesondere auf Ebene des Fahrpersonals noch ein erheblicher Nachholbedarf zu verzeichnen ist.