Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
- Buch (Monographie) (370)
- Konferenzveröffentlichung (142)
- Bericht (15)
- Arbeitspapier (7)
Volltext vorhanden
- ja (534) (entfernen)
Schlagworte
- Deutschland (534) (entfernen)
The main objective of EC CASPER research project is to reduce fatalities and injuries of children travelling in cars. Accidents involving children were investigated, modelling of human being and tools for dummies were advanced, a survey for the diagnosis of child safety was carried out and demands and applications were analysed. From the many research tasks of the CASPER project, the intention of this paper is to address the following: • In-depth investigation of accidents and accident reconstruction. These will provide important points for the injury risk curve, in order to improve it. Different accident investigation teams collected data from real road accidents, involving child car passengers, in five different European countries. Then, a selection of the most appropriate cases for the injury risk curve and the purposes of the project was made for an in-depth analysis. The final stage of this analysis was to conduct an accident reconstruction to validate the results obtained. The in-depth analysis included on-scene accident investigation, creating virtual simulations of the accident/possible reconstruction, and conducting the reconstruction. In the cases of successful reconstructions, new points were introduced to the injury risk curves. Accident reconstructions of selected cases were carried out in test laboratories as the next step following in-depth road accident investigation. These cases were reconstructed using similar child restraint systems (CRS) and the same type make and model as in the real accidents. Reconstructing real cases has several limitations, such as crash angle, cars" approximation paths and crash speed. However, a few changes and applications on the testing conditions were applied to reduce the limitations and improved the representations of the real accidents. After conducting the reconstructions, a comparison between the deformations of the cars on the real accident and the vehicles from the reconstructions was made. Additionally, a correlation between the data captured from the dummies and the injury data from the real accident was sought. This finalises an in-depth analysis of the accident, which will provide new relevant points to the injury risk curve. The CASPER project conducted a large research programme on child safety. On technical points, a promising research area is the developing injury risk curves as a result of in-depth accident investigations and reconstructions. This abstract was written whilst the project was not yet finished and final results are not yet known, but they will be available by the time of the conference. All the works and findings will not necessarily be integrated in the industrial versions of evaluation tools as the CASPER project is a research program.
While accident statistics on a national level are provided by many countries, there is a need for international data that includes more detailed information about the accident, so called in-depth data. As a consequence, accident data projects have been emerging in different regions of the world. This creates a need for comparable and mergeable data from different countries, enabling the use of already existing accident data resources and helping to expedite the improvement of global road safety. While existing approaches focus that mostly on building a comprehensive accident database from scratch, the iGLAD project (Initiative for the Global Harmonization of Accident Data) attempts a more pragmatic approach by building on top of the work already accomplished in this area and complementing it. The target of iGLAD is to help setting up an additional dataset as a compatibility layer between already existing world wide data sets and integrating the structure of these by defining a common data scheme. This dataset is limited to the common denominator between the existing data sets and is inherently rather small and simple. Eventually, an individual converter for each participating accident investigation group will be built that enables pooling all data sets in a common repository. This not only saves costs and time, and hence makes such a target more feasible, but also creates data that is usable right from the start. This paper gives an overview of the current status of iGLAD and first steps taken. Additionally, some methodological aspects are discussed, next to a glance at other projects working currently on related issues, providing additional input for iGLAD. Finally, an overview of next steps and intended future work is given.
Do learner gain sufficient braking capabilities at the end of education for collision avoidance?
(2013)
The paper describes a test design to evaluate the braking behaviour in the course of the driver education. The results show that the braking capabilities increased during the driver education and the learning effects are the same for males and females. The evaluation limit is set to 6 m/s-². At the beginning of education, 50% of the drivers do not reach this limit, although the driver education car is equipped with an emergency brake assist, which is regularly installed in all vehicles since 2009. After the education, 100% of the drivers can reach the limit. The results are mapped to a collision avoidance scenario.
Injuries in motorbike accidents in correlation with protective clothes and mechanism of the accident
(2013)
This study deals with a possible connection between safety clothing / accident mechanism and injury severity in a state-wide traffic accident investigation with focus on light and small motorbike-involvement for accidents in the area of the Saarland in which the persons riding the bike have been injured or killed. An interdisciplinary team of medical scientists and engineers collected the medical and technical data as well as all the relevant traces of the accident on scene and in time. During twenty months of data collection a total of 401 cases could be gathered. Grave injuries were more common for the group of heavier motorcycles (>125 ccm). Motorcyclists had been polytraumatized only in the group where the accident was connected with a collision. Significant correlation between protective clothes and injury severity could only be found for protective gloves and protective trousers. The knowledge about mechanism of the accident, protective clothes and severity of injuries can be helpful for the improvement of road and motorcyclists' safety.
Although the number of road accident casualties in Europe (EU27) is falling the problem still remains substantial. In 2011 there were still over 30,000 road accident fatalities. Approximately half of these were car occupants and about 60 percent of these occurred in frontal impacts. The next stage to improve a car's safety performance in frontal impacts is to improve its compatibility. The objective of the FIMCAR FP7 EU-project was to develop an assessment approach suitable for regulatory application to control a car's frontal impact and compatibility crash performance and perform an associated cost benefit analysis for its implementation. This paper reports the cost benefit analyses performed to estimate the effect of the following potential changes to the frontal impact regulation: • Option 1 " No change and allow current measures to propagate throughout the vehicle fleet. • Option 2 " Add a full width test to the current offset Deformable Barrier (ODB) test. • Option 3 " Add a full width test and replace the current ODB test with a Progressive Deformable Barrier (PDB) test. For the analyses national data were used from Great Britain (STATS 19) and from Germany (German Federal Statistical Office). In addition in-depth real word crash data were used from CCIS (Great Britain) and GIDAS (Germany). To estimate the benefit a generalised linear model, an injury reduction model and a matched pairs modelling approach were applied. The benefits were estimated to be: for Option 1 "No change" about 2.0%; for Option 2 "FW test" ranging from 5 to 12% and for Option 3 "FW and PDB tests" 9 to 14% of car occupant killed and seriously injured casualties.
Ziel der Untersuchung war es, anhand realer Fälle adaptive Steuerungen von Lichtsignalanlagen für städtische Hauptverkehrsstraßen mit konventionellen Steuerungen zu vergleichen. Für die Untersuchung wurden je zwei Hauptverkehrsstraßen in Münster und Remscheid ausgesucht, auf denen adaptive Steuerungen eingerichtet wurden. Dabei wurde zunächst eine konventionelle Koordinierung mit weitgehend verkehrsabhängigen Elementen hergestellt. Zusätzlich konnte jeweils eine adaptive Steuerung geschaltet werden. Auf allen Strecken wurden systematisch Testfahrten bei Schaltung der verschiedenen Steuerungszustände durchgeführt. Die hierbei mittels GPS aufgezeichneten Fahrzeugtrajektorien wurden hinsichtlich der Anzahl von Halten und der Wartezeiten analysiert, um so zu einer verkehrstechnischen Beurteilung zu gelangen. Auf der ersten Teststrecke in Münster konnte durch die adaptive Steuerung eine deutliche Verbesserung des Verkehrsablaufs erreicht werden. Auf der zweiten Teststrecke in Münster ließ sich dieser Erfolg nicht wiederholen. Es traten teilweise erhebliche verkehrliche Verschlechterungen bei Schaltung der adaptiven Steuerung ein. Auf den Teststrecken in Remscheid ergaben sich durch die adaptive Steuerung in jeweils einer Fahrtrichtung Verbesserungen des Verkehrsflusses. Dem stehen jedoch Verschlechterungen in der Gegenrichtung gegenüber. Weil eine direkte Erfassung der Immissionen vor Ort nicht möglich war, wurde eine Antwort hinsichtlich der ökologischen Wirkungen durch mikroskopische Simulation gesucht. Für je eine Strecke in Münster und Remscheid wurde die adaptive Steuerung in ein VISSIM-Modell integriert. Die simulierten Fahrzeugtrajektorien wurden durch das Verfahren PHEM im Hinblick auf die Schätzung der Emissionen analysiert. Dabei zeigte sich in Münster eine leichte Verbesserung (1,0 %) der ökologischen Auswirkungen als Folge der adaptiven Steuerung. In Remscheid zeigte sich nach den eingetretenen ungünstigen verkehrlichen Wirkungen erwartungsgemäß auch eine Verschlechterung der ökologischen Auswirkungen. Die Ergebnisse der mikroskopischen Simulation in Verbindung mit der adaptiven Steuerung auf diesem Streckenzug unterlagen jedoch erheblichen Schwankungen, sodass hiermit lediglich tendenzielle Aussagen möglich sind. Im Ergebnis zeigte sich, dass die adaptiven Verfahren die Möglichkeit eröffnen, den Verkehrsfluss auf städtischen Hauptverkehrsstraßen zu verflüssigen. Dabei können auch Verbesserungen hinsichtlich der Schadstoffemissionen und des Energieverbrauchs eintreten. Diese Verbesserungen können jedoch nicht uneingeschränkt vorausgesetzt werden, sondern bedürfen einer zum Teil längerfristigen, kostenintensiven Einstellungsphase.
This study analyses no.39 cases in which n.41 motorcyclists were fatally injured, or 36% of total motorcycle fatalities in Northern Ireland between 2004 and 2010 (n.114). There were n.17 cases (43.6%) where the actions of another vehicle driver caused the collision, in thirteen of these cases the motorcycles had their lights switched on. The remaining n.22 collisions (56.4%) were due to the actions of the motorcyclist. In the approach to the collision scene, there were n.13 cases (31.7%) in which the approach was a right hand bend and in n.8 (19.5%) cases, the approach was a left hand bend. In the remaining n.18 (43.9%) cases, the approach was a straight road. Of the n.17 (41.4%) motorcycles that slid after falling, n.10 (24.4%) fell onto their right side and the remaining n.7 (17.1%) fell onto their left side. The information from this study identifies primary and contributory causes of motorcycle collisions.
Die Anforderungen an Brückenbauwerke haben sich in den vergangenen Jahren infolge der steigenden Verkehrszahlen deutlich erhöht. Gleichzeitig hat sich mit der Umstellung der Normen der rechnerische Querkraftwiderstand von Bauteilen ohne Querkraftbewehrung verringert. Daher lässt sich für Brückenbauwerke im Bestand mit Fahrbahnplatten ohne Querkraftbewehrung nach derzeitigen technischen Regeln oft nicht eine ausreichende Querkrafttragfähigkeit nachweisen. Allerdings sind die berechneten Tragfähigkeiten aufgrund einer Unterschätzung der mitwirkenden Plattenbreite konservativ. Der derzeit gültige Ansatz zur Berechnung der Querkrafttragfähigkeit ohne Querkraftbewehrung nach DIN-Fachbericht 102 (2009) wurde anhand einer Querkraftdatenbank kalibriert, die hauptsächlich aus Versuchen an Balken besteht. Bislang wurden nur wenige Versuche zur Querkrafttragfähigkeit von Platten unter punktförmiger Belastung durchgeführt. Im vorliegenden von der Bundesanstalt für Straßenwesen geförderten und am Institut für Massivbau der RWTH Aachen durchgeführten Forschungsvorhaben wurde durch experimentelle und theoretische Untersuchungen das Querkrafttragverhalten von Platten genauer analysiert. Die experimentellen Untersuchungen bestanden aus insgesamt 17 Bauteilversuchen in zwei Versuchsserien. In der ersten Versuchsserie wurde die Fragestellung der sich einstellenden Lastverteilungsbreite bei Platten ohne Querkraftbewehrung im Zustand II untersucht. Hierzu wurde durch Variation der Plattenbreite (0,5 m bis 3,5 m) an Einfeldsystemen gezielt der Übergang von der Balkentragwirkung zur Plattentragwirkung analysiert. Anschließend wurde der Einfluss der Schubschlankheit (2,9 bis 5,4) auf das Querkrafttragverhalten überprüft. In der zweiten Versuchsserie wurde an Kragarmen von zweistegigen Plattenbalken der Einfluss der Vouten sowie des Momenten-Querkraftverhältnisses untersucht. Aufbauend auf den Versuchen der ersten Versuchsserie wurden nichtlineare Finite-Elemente-Berechnungen zur Untersuchung weiterer Einflüsse (z. B. Betonfestigkeit, Längs- und Querbewehrungsgrad, Druckbewehrung, Plattendicke, Stützweite) durchgeführt. Auf Grundlage der durchgeführten theoretischen und experimentellen Untersuchungen wurden abschließend die bestehenden Bemessungsansätze modifiziert und anhand von Versuchen aus der Literatur überprüft.
The objective of the study is to measure the risk of pedestrian and bicyclist in urban traffic through an analysis of real-world accident data. The kinematics and injury mechanisms for both pedestrian and bicyclists are investigated to find the correlation of injury risks with injury related parameters. For this purpose, firstly 338 cases are selected as a sample from an IVAC accident database based on the In-depth Investigation of Vehicle Accident in Changsha of China. A statistic measurement of the fatality and serious injury risks with respect to impact speed was carried out by logistic regression analysis. Secondly, 12 pedestrian and 12 bicyclist accidents were further selected for reconstruction with MADYMO program. A comparative analysis was conducted based on the results from accident analysis and computer reconstructions for the injury risk, head impact conditions and dynamic response of pedestrians and bicyclists. The results indicate that bicyclists suffered lower risks of severe injuries and fatalities compared with pedestrians. The risks of AIS 3+ injury and fatality are 50% for pedestrians at impact speeds of 53.2 km/h and 63.3 km/h, respectively, while that for bicyclists at 62.5 km/h and 71.1 km/h, respectively. The findings could have a contribution to get a better understanding of pedestrians" and bicyclists" exposures in urban traffic in China, and provide background knowledge to generate strategies for pedestrian protection.
Zur Überwachung der Verkehrsentwicklung und zur Ermittlung der Verkehrsstärken auf den Bundesfernstraßen - Bundesautobahnen und Bundesstraßen - fand im Jahre 2010 wieder eine bundesweite Straßenverkehrszählung (SVZ 2010) im Rahmen des üblichen Fünfjahres-Turnus statt. Die Länder hatten die Möglichkeit, auch das nachgeordnete Netz (Landes- und Kreisstraßen) zu zählen und im Rahmen der SVZ 2010 auswerten zu lassen. Von dieser Möglichkeit machten nicht alle Länder Gebrauch, so dass bundesweit nur 59 % der Landesstraßen und nur 34 % der Kreisstraßen mit Zählungen abgedeckt waren. Zu diesen beiden Straßenkategorien können somit keine allgemeinen Aussagen getroffen werden. Der vorliegende Bericht beinhaltet mittlere DTV und Jahresfahrleistungen, differenziert nach Fahrzeugarten und Straßenklassen für das Bundesgebiet insgesamt und für jedes einzelne Bundesland. Außerdem sind Beschreibungen zur Berechnung der DTV- und Fahrleistungsstatistiken enthalten sowie einige Ausführungen zu Entwicklungen der mittleren DTV-Werte und Jahresfahrleistungen in Bezug auf 2005.