Sonstige
Filtern
Erscheinungsjahr
- 2017 (26) (entfernen)
Dokumenttyp
Volltext vorhanden
- nein (26) (entfernen)
Schlagworte
- Radfahrer (7)
- Cyclist (6)
- Accident (5)
- Fußgänger (5)
- Pedestrian (5)
- Prüfverfahren (5)
- Test method (5)
- Unfall (5)
- Alte Leute (4)
- Injury (4)
- Verletzung (4)
- Analyse (math) (3)
- Analysis (math) (3)
- Autobahn (3)
- Bearing capacity (3)
- Bridge (3)
- Brücke (3)
- Collision (3)
- Europa (3)
- Europe (3)
- Insasse (3)
- Measurement (3)
- Messung (3)
- Motorway (3)
- Old people (3)
- Prestressed concrete (3)
- Safety (3)
- Schweregrad (Unfall, Verletzung) (3)
- Severity (accid, injury) (3)
- Sicherheit (3)
- Spannbeton (3)
- Test (3)
- Tragfähigkeit (3)
- Tunnel (3)
- Vehicle occupant (3)
- Zusammenstoß (3)
- Beam (2)
- Belastung (2)
- Benutzung (2)
- Bewertung (2)
- Car (2)
- Condition survey (2)
- Cracking (2)
- Decke (Straße) (2)
- Detection (2)
- Detektion (2)
- Deutschland (2)
- Driver (2)
- Driver assistance system (2)
- Evaluation (assessment) (2)
- Fahrer (2)
- Fahrerassistenzsystem (2)
- Festigkeit (2)
- Germany (2)
- Impact test (veh) (2)
- Life cycle (2)
- Load (2)
- Mechanics (2)
- Mechanik (2)
- Method (2)
- Pkw (2)
- Risiko (2)
- Risikoverhalten (2)
- Risk (2)
- Risk taking (2)
- Rissbildung (2)
- Schub (2)
- Sensor (2)
- Shear (2)
- Simulation (2)
- Statistics (2)
- Statistik (2)
- Surfacing (2)
- Use (2)
- Verfahren (2)
- Versuch (2)
- Zustandsbewertung (2)
- Abdichtung (1)
- Abfluss (1)
- Accident rate (1)
- Active safety (1)
- Active safety system (1)
- Aged people (1)
- Air pollution (1)
- Aktive Sicherheit (1)
- Aktives Sicherheitssystem (1)
- Alternative energy (1)
- Anthropometric dummy (1)
- Arzneimittel (1)
- Asphalt (1)
- Asphaltstraße (Oberbau) (1)
- Aufprallschlitten (1)
- Auswahl (1)
- Automatic (1)
- Automatisch (1)
- Autonomes Fahren (1)
- Autonomes Fahrzeug (1)
- Autonomous driving (1)
- Autonomous vehicle (1)
- Bauwerk (1)
- Bauwerksmonitoring (1)
- Behaviour (1)
- Bemessung (1)
- Berechnung (1)
- Beton (1)
- Betonstraße (Oberbau) (1)
- Bicyclist (1)
- Bituminous mixture (1)
- Bodenmechanik (1)
- Box grider (1)
- Brand (1)
- Bridge deck (1)
- Bridge surfacing (1)
- Brustkorb (1)
- Brückenbelag (1)
- Calculation (1)
- Calibration (1)
- Camera (1)
- Cement (1)
- Classification (1)
- Concrete (1)
- Cooperative intelligent transport system (1)
- Correlation (1)
- Crash Test (1)
- Crashtest (1)
- Damage (1)
- Data acquisition (1)
- Data base (1)
- Data processing (1)
- Data security (1)
- Datenbank (1)
- Datenerfassung (1)
- Datensicherheit (1)
- Datenverarbeitung (1)
- Daytime running light (1)
- Deflection (1)
- Deflectograph (1)
- Degree of curvature (1)
- Deicing (1)
- Design (overall design) (1)
- Deterioration (1)
- Diagnostik (1)
- Digitale Bildverarbeitung (1)
- Dispersion (stat) (1)
- Driving (veh) (1)
- Driving aptitude (1)
- Droge (1)
- Drugs (1)
- Drunkenness (1)
- Dummy (1)
- Durchbiegung (1)
- Durchbiegungsmesser (1)
- Eichung (1)
- Engineering structure (1)
- Enteisung (1)
- Environment (1)
- Environment protection (1)
- Ermüdung (Mater) (1)
- Erneuerbare Energie (1)
- Fahrtauglichkeit (1)
- Fahrzeugführung (1)
- Fatality (1)
- Fatigue (mater) (1)
- Fein (mater) (1)
- Feinstaub (1)
- Feldversuch (1)
- Fernverkehrsstrasse (1)
- Fine (mater) (1)
- Fire (1)
- Flexible pavement (1)
- Frau (1)
- Front (1)
- Fuge (1)
- Fugenfüllung (1)
- Gebirge (1)
- Greenhouse effect (1)
- Head (human) (1)
- Heavy metal (1)
- Hohlkastenträger (1)
- Human body (1)
- Image processing (1)
- Impact sled (1)
- Improvement (1)
- In situ (1)
- Instandsetzung (1)
- Intelligentes Bauwerk (1)
- Intersection (1)
- Jahreszeit (1)
- Joint (structural) (1)
- Joint sealing (1)
- Kamera (1)
- Klassifizierung (1)
- Knotenpunkt (1)
- Kooperatives System (ITS) (1)
- Kopf (menschl) (1)
- Korn (1)
- Kornverteilung (1)
- Korrelation(Math (1)
- Krümmung (1)
- Kunststoff (1)
- Learning (1)
- Lebensdauer (1)
- Lebenszyklus (1)
- Lernen (1)
- Lkw (1)
- Lorry (1)
- Luftverunreinigung (1)
- Main road (1)
- Man (1)
- Mann (1)
- Materialveraenderung (allg) (1)
- Medical aspects (1)
- Medication (1)
- Medizinische Gesichtspunkte (1)
- Menschlicher Körper (1)
- Messgerät (1)
- Metal bridge (1)
- Model (not math) (1)
- Modell (1)
- Mountain (1)
- Network (traffic) (1)
- Neural network (1)
- Neuronales Netz (1)
- Norm (tech) (1)
- Oberfläche (1)
- Orthotrope Fahrbahntafel (1)
- Orthotropic plate (1)
- Particle (1)
- Particle size distribution (1)
- Particulate matter (1)
- Passive safety system (1)
- Passives Sicherheitssystem (1)
- Pavement Management System (1)
- Planning (1)
- Planung (1)
- Plastic material (1)
- Platte (1)
- Pollutant (1)
- Quality assurance (1)
- Qualitätssicherung (1)
- Reinforcement (in mater) (1)
- Repair (1)
- Residual (1)
- Rest (1)
- Richtlinien (1)
- Rigid Pavement (1)
- Risikobewertung (1)
- Risk assessment (1)
- Road (1)
- Road network (1)
- Robot (1)
- Roboter (1)
- Run off (1)
- Sachschaden (1)
- Schadstoff (1)
- Schweregrad (Unfall (1)
- Schwermetall (1)
- Season (1)
- Selection (1)
- Severity (accid (1)
- Slab (1)
- Smart structure (1)
- Soil mechanics (1)
- Spannungsanalyse (1)
- Specification (standard) (1)
- Specifications (1)
- Stahlbrücke (1)
- Standardabweichung (1)
- Stat) (1)
- Steg (1)
- Steifigkeit (1)
- Stiffness (1)
- Straße (1)
- Straßennetz (1)
- Strength (1)
- Strength (mater) (1)
- Stress analysis (1)
- Structural health monitoring (1)
- Surface (1)
- Tagesfahrlicht (1)
- Technologie (1)
- Technology (1)
- Telecommunication (1)
- Telekommunikation (1)
- Thorax (1)
- Traffic count (1)
- Traffic survey (1)
- Transducer (1)
- Transport infrastructure (1)
- Treibhauseffekt (1)
- Trend (stat) (1)
- Trunkenheit (1)
- Träger (1)
- Tunnel lining (1)
- Tunnelauskleidung (1)
- Tödlicher Unfall (1)
- Ultra high performance concrete (1)
- Ultrahochfester Beton (1)
- Ultraschall (1)
- Ultrasonic (1)
- Umwelt (1)
- Umweltschutz (1)
- Unfallhäufigkeit (1)
- Verbesserung (1)
- Verhalten (1)
- Verkehrserhebung (1)
- Verkehrsinfrastruktur (1)
- Verkehrsnetz (1)
- Verkehrsuntersuchung (1)
- Verletzung) (1)
- Verstärkung (Brücke) (1)
- Versuch Apparatus (measuring) (1)
- Vorne (1)
- Wasser (1)
- Water (1)
- Waterproofing (1)
- Weather (1)
- Witterung (1)
- Woman (1)
- Zement (1)
- injury) (1)
- Übertrager (1)
Bei der Nachrechnung älterer Spannbetonbruecken mit Hohlkastenquerschnitt werden derzeit häufig grosse rechnerische Defizite beim Nachweis der schubfesten Verbindung zwischen gedrückter Bodenplatte und den Stegen im Bereich der Zwischenunterstützungen festgestellt. Neben erhöhten Beanspruchungen als Folge stetig wachsender Verkehrslastzahlen sind diese Defizite im Wesentlichen auf die mit Einführung der DIN-Fachberichte für den Brückenbau im Jahr 2003 geänderten Bemessungsvorschriften zurückzuführen. In Deutschland erfolgt die Ermittlung des Tragwiderstands im Grenzzustand der Tragfähigkeit (GTZ) seither auf Grundlage des Fachwerkmodells mit Rissreibung. In den vorgestellten Untersuchungen wird gezeigt, dass die Übertragung dieses für Stegquerschnitte entwickelten Modells auf Druckgurte mechanisch nicht begründet ist und zu sehr konservativen Ergebnissen führt. Auf Basis der Ergebnisse numerischer und analytischer Betrachtungen werden Bemessungsmodelle entwickelt, die das Tragverhalten vorwiegend gedrückter Gurtbereiche realitätsnäher erfassen. Die Kalibrierung und Verifikation der Finite Element-Modelle erfolgt in den durchgeführten Untersuchungen stets durch den Vergleich mit Ergebnissen gut dokumentierter Versuche aus der Literatur.
Die Kommunikation zwischen Fahrzeugen und Infrastrukturkomponenten steht vor der Einführung in Europa. Dieser Beitrag stellt zunächst die grundlegende Technologie zum Austausch von Nachrichten und ein Pilotprojekt vor, innerhalb dessen eine sichere Fahrzeug-zu-Infrastruktur Kommunikation konzipiert und praktisch erprobt wird. Darauf aufbauend werden Sicherheitsfragestellungen von Infrastrukturkomponenten beleuchtet und ein Einblick in das Schlüsselmanagement sowohl für Fahrzeuge als auch Infrastrukturkomponenten gegeben.
Test and assessment procedures for passive pedestrian protection based on developments by the European Enhanced Vehicle-safety Committee (EEVC) have been introduced in world-wide regulations and consumer test programmes, with considerable harmonization between these programmes. Nevertheless, latest accident investigations reveal a stagnation of pedestrian fatality numbers on European roads running the risk of not meeting the European Union- goal of halving the number of road fatalities by the year 2020. The branch of external road user safety within the EC-funded research project SENIORS under the HORIZON 2020 framework programme focuses on investigating the benefit of modifications to pedestrian test and assessment procedures and their impactors for vulnerable road users with focus on the elderly. Injury patterns of pedestrians and cyclists derived from the German In-Depth Accident Study (GIDAS) show a trend of AIS 2+ and AIS 3+ injuries getting more relevant for the thorax region in crashes with newer cars (Wisch et al., 2017), while maintaining the relevance for head and lower extremities. Several crash databases from Europe such as GIDAS and the Swedish Traffic Accident Data Acquisition (STRADA) also show that head, thorax and lower extremities are the key affected body regions not only for the average population but in particular for the elderly. Therefore, the SENIORS project is focusing on an improvement of currently available impactors and procedures in terms of biofidelity and injury assessment ability towards a better protection of the affected body regions, incorporating previous results from FP 6 project APROSYS and subsequent studies carried out by BASt. The paper describes the overall methodology to develop revised FE impactor models. Matched human body model and impactor simulations against generic test rigs provide transfer functions that will be used for the derivation of impactor criteria from human injury risk functions for the affected body regions. In a later step, the refined impactors will be validated by simulations against actual vehicle front-ends. Prototyping and adaptation of test and assessment procedures as well as an impact assessment will conclude the work of the project at the final stage. The work will contribute to an improved protection of vulnerable road users focusing on the elderly. The use of advanced human body models to develop applicable assessment criteria for the revised impactors is intended to cope with the paucity of actual biomechanical data focusing on elderly pedestrians. In order to achieve optimized results in the future, the improved test methods need to be implemented within an integrated approach, combining active with passive safety measures. In order to address the developments in road accidents and injury patterns of vulnerable road users, established test and assessment procedures need to be continuously verified and, where needed, to be revised. The demographic change as well as changes in the vehicle fleet, leading to a variation of accident scenarios, injury frequencies and injury patterns of vulnerable road users are addressed by the work provided by the SENIORS project, introducing updated impactors for pedestrian test and assessment procedures.
A reduction of around 48% of all road fatalities was achieved in Europe in the past years including a reduced number of fatalities with an older age. However, among all road fatalities, the proportion of elderly is steadily increasing. In an ageing society, the European (Horizon2020) project SENIORS aims to improve the safe mobility of older road users, who have different transportation habits compared to other age groups. To increase their level of safe mobility by determining appropriate requirements for vehicle safety systems, the characteristics of current road traffic collisions involving the elderly and the injuries that they sustain need to be understood in detail. Hereby, the paper focuses on their traffic participation as pedestrian, cyclist or passenger car occupant. Following a literature review, several national and international crash databases and hospital statistics have been analysed to determine the body regions most frequently and severely injured, specific injuries sustained and types of crashes involved, always comparing older road users (65 years and more) with mid-aged road users (25-64 years). The most important crash scenarios were highlighted. The data sources included European statistics from CARE, data on national level from Germany, Sweden, Italy, United Kingdom and Spain as well as in-depth crash information from GIDAS (Germany), RAIDS (UK), CIREN and NASS-CDS (US). In addition, familiar hospital data from Germany (TraumaRegister DGU-®), Italy (Italian Register of Acute Traumas) and UK hospital statistics (TARN) were included in the study to gain further insight into specific injury patterns. Comprehensive data analyses were performed showing injury patterns of older road users in crashes. When comparing with mid-aged road users, all databases showed that the thorax body region is of particularly high importance for the older car occupant with injury severities of AIS 2 or AIS 3+, whereas the body regions lower extremities, head and thorax need to be considered for the older pedestrians and cyclists. Besides these comparisons, the most frequent and severe top 5 injuries were highlighted per road user group. Further, the most important crash configurations were identified and injury risk functions are provided per age group and road user group. Although several databases have been analysed, the picture on the road safety situation of older road users in Europe was not complete, as only Western European data was available. The linkage between crash data and hospital data could only be made on a general level as their inclusion criteria were quite different.
Supported by field accident data and monitoring results of European Regulation (EC) No. 78/2009, recent plans of the European Commission regarding a way forward to improve passive safety of vulnerable road users include, amongst other things, an extension of the head test area. The inclusion of passive cyclist safety is also being considered by Euro NCAP. Although passenger car to cyclist collisions are often severe and have a significant share within the accident statistics, cyclists are neither considered sufficiently in the legislative nor in the consumer ratings tests. Therefore, a test procedure to assess the protection potential of vehicle fronts in a collision with cyclists has been developed within a current research project. For this purpose, the existing pedestrian head impact test procedures were modified in order to include boundary conditions relevant for cyclists as the second big group of vulnerable road users. Based on an in-depth analysis of passenger car to cyclist accidents in Germany the three most representative accident constellations have been initially defined. The development of the test procedure itself was based on corresponding simulations with representative vehicle and bicycle models. In addition to different cyclist heights, reaching from a 6-year-old child to a 95%-male, also four pedal positions were considered. By reconstruction of a real accident the defined simulation parameters could be validated in advance. The conducted accident kinematics analysis shows for a large portion of the constellations an increased head impact area, which can reach beyond the roof leading edge, as well as high average values for head impact velocity and angle. Based on the simulation data obtained for the different vehicle models, cyclist-specific test parameters for impactor tests have been derived, which have been further examined in the course of head and leg impact tests. In order to study the cyclist accident kinematics under real test conditions, different full scale tests with a Polar-II dummy positioned on a bicycle have been conducted. Overall, the tests showed a good correlation with the simulations and support the defined boundary test conditions. Typical accident scenarios and simulations reveal higher head impact locations, angles and velocities. An extended head impact area with modified test parameters will contribute to an improved protection of vulnerable road users including cyclists. However, due to significantly differing impact kinematics and postures between the lower extremities of pedestrians and cyclists, these injuries cannot be addressed by the means of current test tools such as the flexible pedestrian legform impactor FlexPLI. Based on the findings obtained within the project as well as the existing pedestrian protection requirements a cyclist protection test procedure for use in legislation and consumer test programmes has been developed, whose requirements have been transferred into a corresponding test specification. This specification provides common head test boundary conditions for pedestrians and cyclists, whereby the existing requirements are modified and two parallel test procedures are avoided.
Sowohl im Bereich der invasiven, nicht zerstörungsfrei arbeitenden Methoden als auch bei den zerstörungsfrei und schnellfahrenden Techniken und Methoden ist in den letzten Jahren ein deutlicher Innovationsschub erkennbar. Mit diesen Methoden und Techniken wird das Ziel verfolgt, vergleichbare und hochwertige Substanzbewertungsverfahren sowohl fuer die Objekt- als auch die Netzebene aufzustellen. Der FGSV-Arbeitsausschuss "Substanzbewertung", seine Arbeitskreise, verschiedenste Forschungseinrichtungen und die BASt arbeiten gemeinsam daran, diese Methoden und Techniken zu evaluieren, zu standardisieren und auch neue Methoden und Techniken aufzustellen. Da die Fragestellungen der Substanzbewertung derzeit weltweit ein sehr beachtetes Thema darstellen, erfolgt die Bearbeitung oftmals im engen internationalen Austausch. Der Beitrag fasst den aktuellen Stand der Technik sowohl invasiv arbeitender Methoden als auch der zerstörungsfrei arbeitenden Methoden zusammen und zeigt, welche Potenziale und Grenzen hierbei noch zu bewerten sind. Des Weiteren wird ein Ausblick auf neue Methoden, Forschungsprojekte und Wissensdokumente gegeben.
PROSPECT (Proactive Safety for Pedestrians and Cyclists) is a collaborative research project involving most of the relevant partners from the automotive industry (including important active safety vehicle manufacturers and tier-1 suppliers) as well as academia and independent test labs, funded by the European Commission in the Horizon 2020 research program. PROSPECT's primary goal is the development of novel active safety functions, to be finally demonstrated to the public in three prototype vehicles. A sound benefit assessment of the prototype vehicle's functionality requires a broad testing methodology which goes beyond what has currently been used. Since PROSPECT functions are developed to prevent accidents in intersections, a key aspect of the test methodology is the reproduction of natural driving styles on the test track with driving robots. For this task, data from a real driving study with subjects in a suburb of Munich, Germany was used. Further data from Barcelona will be available soon. The data suggests that intersection crossing can be broken down into five phases, two phases with straight deceleration / acceleration, one phase with constant radius and speed turning, and two phases where the bend is imitated or ended. In these latter phases, drivers mostly combine lateral and longitudinal accelerations and drive what is called a clothoid, a curve with curvature proportional to distance travelled, in order to change lateral acceleration smoothly rather than abrupt. The data suggests that the main parameter of the clothoid, the ratio distance travelled to curvature, is mostly constant during the intersections. This parameter together with decelerations and speeds allows the generation of synthetic robot program files for a reproduction of natural driving styles using robots, allowing a much greater reproducibility than what is possible with human test drivers. First tests show that in principle it is possible to use the driving robots for vehicle control in that manner; a challenge currently is the control performance of the robot system in terms of speed control, but it is anticipated that this problem will be solved soon. Further elements of the PROSPECT test methodology are a standard intersection marking to be implemented on the test track which allows the efficient testing of all PROSPECT test cases, standard mobile and light obstruction elements for quick reproduction of obstructions of view, and a concept for tests in realistic surroundings. First tests using the PROSPECT test methodology will be conducted over the summer 2017, and final tests of the prototype vehicles developed within PROSPECT will be conducted in early 2018
Im Rahmen eines Forschungsvorhabens an der RWTH Aachen wurden mehrere Spannbetondurchlaufträger bis zum Versagen belastet. Neben umfangreicher konventioneller Messtechnik wurden zusätzlich innovative Messmethoden durch die Bundesanstalt fuer Materialforschung und -prüfung (BAM) getestet. Darunter waren eingebettete Ultraschall-Transducer, deren Daten mit einer neuartigen Methode, der Codawelleninterferometrie (CWI), ausgewertet wurden. Dieses Verfahren detektiert auch kleinste Änderungen im Signal und in der Wellengeschwindigkeit gegenüber einer Referenzmessung. Hiermit koennen Belastungs- und Strukturänderungen sowie Schaeden sehr viel sensibler angezeigt werden als bei konventionellen Ultraschallmessungen. Durch eine Modifikation des Verfahrens mit gleitender Referenz können aber auch starke Veränderungen im Material, wie sie bei Bruchversuchen auftreten, erfasst werden. In den Versuchen gelang es mit Netzwerken aus bis zu 20 Ultraschall-Transducern, Spannungskonzentrationen und Rissbildungen qualitativ zu detektieren und zu verfolgen, ohne dass die Sensoren direkt am Ort der Änderung angebracht werden müssen.
Durch die in den letzten Jahren enorm gestiegenen Verkehrsbelastungen und damit einhergehenden gestiegenen lokalen Beanspruchungen im Deckblech kommt es bei bestehenden Stahlbrücken mit orthotropen Fahrbahnplatten vermehrt zu Ermüdungsschäden im Bereich der geschweißten Anschlüsse der Längsrippen an das Deckblech (Kategorie-1-Schäden). Der vorliegende Beitrag gibt einen Übernblick über existierende Verstärkungsmaßnahmen, die bereits in Pilotprojekten erprobt wurden sowie aktuelle Forschungsarbeiten zur Verstärkung von orthotropen Fahrbahnplatten mit Kategorie-1-Schaeden.
Europe has benefited from a decreasing number of road traffic fatalities. However, the proportion of older road users increases steadily. In an ageing society, the SENIORS project aims to improve the safe mobility of older road users by determining appropriate requirements towards passive vehicle safety systems. Therefore, the characteristics of road traffic crashes involving the elderly people need to be understood. This paper focuses on car occupants and pedestrians or cyclists in crashes with modern passenger cars. Ten crash databases and four hospital statistics from Europe have been analysed to answer the questions on which body regions are most frequently and severely injured in the elderly, and specific injuries sustained by always comparing older (65 years and above) with midâ€aged road users (25â€64 years). It was found that the body region thorax is of particularly high importance for the older car occupant with injury severities of AIS2 or AIS3+, where as the lower extremities, head and the thorax need to be considered for older pedestrians and cyclists. Further, injury risk functions were provided. The hospital data analysis showed less difference between the age groups. The linkage between crash and hospital data could only be made on a general level as their inclusion criteria were quite different.