Sonstige
Filtern
Erscheinungsjahr
- 2007 (7) (entfernen)
Dokumenttyp
Volltext vorhanden
- ja (7) (entfernen)
Schlagworte
- Simulation (7) (entfernen)
Institut
- Sonstige (7) (entfernen)
Im Rahmen des vorliegenden Projekts wurden die verschiedenen Steuerungsverfahren einer Koordinierung untersucht. Dabei wurden im Schwerpunkt die festzeitgesteuerte Koordinierung, die verkehrsabhängige Steuerung mit Rahmenzeitplan und die vollverkehrsabhängige Steuerung miteinander verglichen. Zur Erfassung des Standes der Technik wurden Quellenanalysen durchgeführt. Zusätzlich fanden Expertengespräche statt, um auch Erfahrungen aus der Praxis in die Untersuchung einzubeziehen. Dabei stellte sich heraus, dass in der Fachwelt die Meinung vorherrscht, dass eine festzeitkoordinierte Steuerung nicht mehr dem Stand der Technik entspricht, da sie zu unflexibel ist. Um die tatsächliche Wirkung der Steuerungsverfahren zu überprüfen, wurden zehn Straßenzüge durch empirische Messungen und Simulationen untersucht. Die auf den Straßenzügen in der Realität vorhandenen Steuerungen wurden in den Simulationsmodellen exakt nachgebildet und neue Steuerungen wurden entwickelt. Dadurch konnten umfangreiche Vergleiche zwischen vorhandenen und optimierten Steuerungen sowie zwischen verkehrsabhängigen und festzeitgesteuerten Koordinierungen angestellt werden. Die Bewertung der Verfahren erfolgte anhand eines Performance Index, der die Anzahl der Halte und die Wartezeiten in jeder Knotenpunktzufahrt des Netzes berücksichtigt. Die Untersuchungen führten zu dem Ergebnis, dass die verkehrsabhängige Steuerung keineswegs nur Vorteile gegenüber der Festzeitsteuerung hat. Es ergaben sich je nach Verkehrssituation sehr unterschiedliche Qualitäten der Steuerungsverfahren. In der Simulation wurde außerdem deutlich, dass eine vollverkehrsabhängige Steuerung ohne Rahmenplan nicht geeignet ist für die Steuerung eines Straßenzuges. In den deutschen Richtlinien wird bisher kein Verfahren zur Bestimmung der Verkehrsqualität verkehrsabhängiger Steuerungen beschrieben. In dieser Untersuchung wurde zusätzlich zu den Simulationen ein theoretisches Verfahren zur Bewertung verkehrsabhängiger Steuerungen vorgestellt. Aus den so gewonnenen Untersuchungsergebnissen wurden schließlich Kriterien für die Einsatzbereiche der verschiedenen Steuerungsverfahren entwickelt, die eine Entscheidungsfindung zukünftiger Planungsvorhaben erleichtern sollen.
Validation of human pedestrian models using laboratory data as well as accident reconstruction
(2007)
Human pedestrian models have been developed and improved continually. This paper shows the latest stage in development and validation of the multibody pedestrian model released with MADYMO. The biofidelity of the multibody pedestrian model has been verified using a range of full pedestrian-vehicle impact tests with a large range in body sizes (16 male, 2 female, standing height 160-192cm, weight 53.5-90kg). The simulation results were objectively correlated to experimental data. Overall, the model predicted the measured response well. In particular the head impact locations were accurately predicted, indicated by global correlation scores over 90%. The correlation score for the bumper forces and accelerations of various body parts was lower (47-64%), which was largely attributed to the limited information available on the vehicle contact characteristics (stiffness, damping, deformation). Also, the effects of the large range in published leg fracture tolerances on the predicted risk to leg fracture by the pedestrian model were evaluated and compared with experimental results. The validated mid-size male model was scaled to a range of body sizes, including children and a female. Typical applications for the pedestrian models are trend studies to evaluate vehicle front ends and accident reconstructions. Results obtained in several studies show that the pedestrian models match pedestrian throw distances and impact locations observed in real accidents. Larger sets of well documented cases can be used to further validate the models especially for specific populations as for instance children. In addition, these cases will be needed to evaluate the injury predictive capability of human models. Ongoing developments include a so-called facet pedestrian model with a more accurate geometry description and a more humanlike spine and neck and a full FE model allowing more detailed injury analysis.
The European Union has set a target to reduce all road fatalities (over 40,000) with 50% in 2010. This target percentage remained unchanged with the introduction of the ten new member states within the EU as by May 1st, 2004. According to Eurostat, 34% of all fatalities in 1998 in the, then, fifteen states of the European Union were the result of single vehicle collisions. This represents over 14,000 lives lost each year of which many can likely be saved through better roadside infrastructure design. The challenge for road safety professionals is to find methods and design strategies that help to reduce these casualties. Procedures for full-scale vehicle crash testing of guard rails were first published in the US in 1962. Present European regulation is mainly based on these procedures and later developments. Since then the vehicle fleet has changed considerably. Due to the complexity of the actual safety problem the numerical simulation approach offers a good opportunity to evaluate the different parameters involved in road safety, such as infrastructure properties, vehicle type, vehicle occupants and injuries. The ideal situation would be that simulation tools are coupled or integrated and all involved effects would be related. At the moment this is not the case yet, but initiatives are taken and a new virtual era has started. This paper offers a method looking at two components that encompass the driving environment: the car and the guardrail. As part of the EC-funded project, RISER (Roadside Infrastructure for Safer European Roads) a multi body simulation program study is carried out to determine sensitivities of some parameters in car to guardrail collisions and gives insides in performance of the car with passive safety equipment, the guardrail and the interaction of these objects with each other. By offering a set of methods that includes these two aspects and their intertwining relations, more confidence can be gained in actually reducing fatalities due to single vehicle collisions with, or due to, roadside furniture. Reducing the number of fatalities of single vehicle crashes would contribute greatly to the stated goal of reducing casualties altogether.
Automotive Engineering, Mechanical Engineering and TechnologyrnAbstract: The degrees of injury severity, as a rule injuries scaled by AIS of specific regions of the human body, investigated out of road traffic accidents correspond to the body-specific loading values, which are found out with the aid of experimental or mathematical simulation of crash tests with motor vehicles or with sled tests. The coherence between the injured human being on the one hand and the physical and the theoretical model respectively on the other hand is established by the risk function, which describes the probability of degrees of injury severity in dependence on the protection criteria. Due to the different physical characteristics in the simulation, e.g. accelerations, forces, compressions and their velocity, the compilation of these quantities, comparable to the MAIS, the maximal occurred single AIS obtained in accident analysis is much more difficult in the simulation than in the accident occurrence. Therefore it is obvious to normalize the loading values gained out of simulation and to summarise them to an entire value in a suitable manner, the safety index.rn
Motorcycle safety research
(2007)
Honda- global motorcycle sales exceeded the 10 million units mark since 2004, and further expansion is expected. As a responsibility for a company to provide mobility, Honda is focusing on motorcycle safety as top priority and has been working on various activities for both aspects of hardware and software. Here, we present Honda- activity for the safety technology of motorcycles. At present, Honda is promoting motorcycle safety in the four themes of prevention and collision safety such as safety education, recognition assistance, accident prevention and injury reduction. First, in the area of the safety education, the "Honda Safety Driving Promotion Center" was established in 1970, and motorcycle riders and vehicle driver trainings have been organized, and the traffic training centers are used as an actual practice field not only in Japan but also in many other regions in the world. Through our training activities, the new area of safety training with hardware assistance was developed and Honda- unique technology was accumulated such as the riding simulator which can provide experience of potentially dangerous situations without risk. Especially, the "riding trainer", the popular version of the riding simulator, was introduced at several motor shows in various countries and launched in September 2005. It was distributed first in Europe and is expected to expand globally aiming at 3000 units worldwide.. And in Europe, the newest version, which includes the suburban roads program, jointly developed with ADAC, will be released in near future. In the area of recognition assistance, "vehicle to vehicle communication technology" is under development using the advantage of being a manufacturer of both motorcycles and cars. This technology is under research as Honda "ASV-3" in Japan, and as part of C2C activity in Europe. As for the accident prevention, advanced brake systems for motorcycles to assist more effective brake operation have been expanded, Honda signed the European Road Safety Charter in April 2004 with the advanced brake systems commitment and furthermore, they are expanding according to vehicle characteristics and region. Then all models above 250 cc will have a version of the system by 2010. And as the last theme, "motorcycle airbag system" is introduced which is equipped on a mass production motorcycle for the first time in the world. It has been researched and developed for a long time as an injury reduction technology for collision accidents. Honda automobile technology was used for the research and development of the motorcycle airbag, and many specific issues such as the analysis of the collision conditions particular to motorcycles have been solved to realize today- success. It might be known that ADAC in-house crash test held in August this year confirmed the high effectiveness of the airbag system and showed a positive result. This motorcycle airbag system is equipped to the Honda Gold Wing and launched in North America in August, 2006. Also in Europe, it will be sold by the end of this year. Each theme of Honda motorcycle safety technology can be seen at the Honda booth.
Um das oft komplexe Zusammenwirken von einzelnen betriebstechnischen Einrichtungen zur Detektion von Brandereignissen und Steuerung der Lüftung sowie den übrigen sicherheitstechnischen Systemen überprüfen zu können, werden nach ZTV-ING im Rahmen der Abnahme Funktionsprüfungen gefordert, indem Brände simuliert und die zu prüfenden Größen messtechnisch erfasst werden. Reale Brandversuche in Straßentunnel sind jedoch unter dem Aspekt der Wirtschaftlichkeit und des notwendigen technischen Aufwandes zur Erfassung der interessierenden Branddaten und zum Schutz der betriebstechnischen Einrichtungen sowie des Bauwerkes in der Anzahl der Szenarien wie in der Energiefreisetzung begrenzt. Die unter vertretbarem Aufwand erreichbare Brandleistung beträgt zirka 5 MW. Um dennoch Aussagen über das Verhalten des Systems bei höheren Brandleistungen und unterschiedlichen, realen Randbedingungen (Brandorte, Verkehrsbelegung, Windverhältnisse und so weiter.) zu erhalten, sollten Simulationsrechnungen durchgeführt werden können. Diese erlauben eine sehr flexible Modellierung des Tunnels und die Ermittlung sämtlicher relevanter Größen an beliebigen Punkten im Untersuchungsgebiet. Da die Randbedingungen sehr tunnelspezifisch sein können, sind zur Kalibrierung entsprechender Rechenprogramme Eingangswerte aus standardisierten Brandversuchen hilfreich. Ziel der Untersuchung war es daher, mit Hilfe eines geeigneten Rechenprogramms Anforderungen an einen Brandversuch hinsichtlich der notwendigen Daten zur Funktionsüberprüfung und zur Brandhochrechnung zu definieren. Zur Durchführung der Simulationsrechnungen wurde der "Fire Dynamics Simulator" (FDS) verwendet, der über das National Institute of Standards and Technology als 0pen Source-Rechenprogramm erhältlich ist. Grundlage des Rechenprogramms bilden die Gleichungen für die Massen-, Impuls-, Energie- und Stofferhaltung, die im 3-dimensionalen Raum numerisch gelöst werden und als Ergebnis Geschwindigkeits-, Temperatur- und Konzentrationsfelder bereitstellen. Im Rahmen dieser Untersuchung wurden verschiedene Versuchsreihen des Memorial-Tunnel-Fire-Ventilation-Test-Program (MTFVTP) zur Verifizierung der Rechenergebnisse herangezogen. Die vergleichende Gegenüberstellung der einen Brand charakterisierenden Größen Geschwindigkeit und Temperatur ergaben eine überwiegend gute Übereinstimmung der Messwerte aus den Brandversuchen mit den Simulationsergebnissen. Basierend auf den Berechnungen zu den Temperatur- und Geschwindigkeitsverteilungen wurden schließlich unter den Aspekten der Funktionsüberprüfung der betriebstechnischen Einrichtungen und der Erfassung von Eingangsgrößen für Simulationsrechnungen Anforderungen zur Versuchsanordnung, Branddauer, Brandgut und Erfassung der relevanten Messgrößen im Längs- und Querschnitt sowie Anforderungen zu Schutzvorkehrungen abgeleitet. Die Untersuchung hat gezeigt, dass die Definition "eines" Standardbrandversuchs nicht zweckmäßig ist, da die Zielsetzungen sich zu sehr unterscheiden. Dagegen konnten konkrete Grundlagen und Empfehlungen zur Festlegung standardisierter Brandversuche für die gemäß RABT und ZTV-ING vorgesehenen Funktionstests erarbeitet werden. Außerdem konnte gezeigt werden, dass das für die Simulationsrechnungen verwendete Programm FDS derzeit ein adäquates Instrument bildet, nicht nur bezüglich der Simulation von Tunnelbränden unter realen Gegebenheiten und der resultierenden Strömungs- und Temperaturverhältnissen sowie Rauchkonzentrationen, sondern auch in Bezug auf die benötigte Rechner- und Speicherkapazität.
In recent years the boundaries between active and passive safety blurred more and more. Passive safety in the traditional term includes all safety aspects to prevent occupants to be injured or at least injury severity should be reduced. Passive Safety starts with the collision (first vehicle contact) and ends with rescue (open vehicle doors). Within this phase the occupant has to be protected by the passenger compartment whereby no intrusion should occur. Active safety on the other side was developed to interact prior to the collision whereby the goal is to prevent accidents. The extensive interaction between active and passive safety led to the terminologies "Primary" and "Secondary" safety whereas the expression Integrated Safety Concept was generated. Within this study the most well documented single vehicle accidents with cars not equipped with ESP were identified from the PENDANT database and reconstructed. Additional cases were found in the database ZEDATU of TU Graz. In comparison each case was simulated with the assumption that the cars were equipped with ESP. The differences regarding accident avoidance or crash severity as well as reduction of injury risk were analysed.