Abteilung Fahrzeugtechnik
Filtern
Erscheinungsjahr
- 2009 (14) (entfernen)
Dokumenttyp
Schlagworte
- Conference (7)
- Konferenz (7)
- Accident (4)
- Anthropometric dummy (4)
- Bewertung (4)
- Dummy (4)
- Unfall (4)
- Deutschland (3)
- Germany (3)
- Biomechanics (2)
Institut
- Abteilung Fahrzeugtechnik (14) (entfernen)
In the EC FP6 Integrated Project Advanced Protection Systems, APROSYS, the first WorldSID small female prototype was developed and evaluated by BASt, FTSS, INRETS, TRL and UPM-INSIA during 2006 and 2007. Results were presented at the ESV 2007 conference (Been et al., 2007). With the prototype dummy scoring a biofidelity rating higher than 6.7 out of 10 according to ISO/TR9790, the results were very promising. Also opportunities for further development were identified by the evaluation group. A revised prototype, Revision1, was subsequently developed in the 2007-2008 period to address comments from the evaluation group. The Revision1 dummy includes changes in the half arms and the suit (anthropometry and arm biomechanics), the thorax and abdomen ribs and sternum (rib durability), the abdomen/lumbar area and the lower legs (mass distribution). Also a two-dimensional chest deflection measurement system was developed to measure deflection in both lateral and anterior-posterior direction to improve oblique thorax loading sensitivity. Two Revision1 prototype dummies have now been evaluated by FTSS, TRL, UPM-INSIA and BASt. The updated prototype dummies were subjected to an extensive matrix of biomechanical tests, such as full body pendulum tests and lateral sled impact tests as specified by Wayne State University, Heidelberg University and Medical College of Wisconsin. The results indicated a significant improvement of dummy biofidelity. The overall dummy biofidelity in the ISO rating system has significantly improved from 6.7 to 7.6 on a scale between 0-10. The small female WorldSID has now obtained the same biofidelity rating as the WorldSID mid size male dummy. Also repeatability improved with respect to the prototype. In conclusion the recommended updates were all executed and all successfully contributed in achieving improved performance of the dummy.
In the last years there has been a decline in accident figures in Germany especially for four wheeled vehicles. At the same time, accident figures for motorcycles remained nearly constant. About 17 % of road traffic fatalities in the year 2006 were motorcyclists. 33 % of these riders were killed in single vehicle crashes. This leads to the conclusion that improving driving dynamics and driving stability of powered two wheelers would yield considerable safety gains. However, the well-known measures for cars and trucks with their proven effectiveness cannot be transferred easily to motorcycles. Therefore studies were carried out to examine the safety potential of Anti Lock Braking Systems (ABS) and Vehicle Stability Control (VSC) for motorcycles by means of accident analysis, driving tests and economical as well as technical assessment of the systems. With regard to ABS, test persons were assigned braking tasks (straight and in-curve) with five different brake systems with and without ABS. Stopping distances as well as stress and strain on the riders were measured for 9 test riders who completed 105 braking manoeuvres each. Knowing the ability of ABS to avoid falls during braking in advance of a crash and taking into account the system costs, a cost benefit analysis for ABS for motorcycles was carried out for different market penetration of ABS, i.e. equipment rates, and different time horizons. The potential of VSC for motorcycles was estimated in two steps. First the kinds of accidents that could be prevented by such a system at all have been analysed. For these accident configurations, simulations and driving tests were then performed to determine if a VSC was able to detect the critical driving situation and if it was technically possible to implement an actuator which would help to stabilise the critical situation.
Die Griffigkeit ist die maßgebende Größe für die Übertragung der Längs- als auch der Seitenkräfte von Reifen auf die Straßenoberfläche und hat somit einen erheblichen Anteil an der Straßensicherheit. In Deutschland erfolgt die Erfassung der Straßengriffigkeit im Rahmen von Bauverträgen sowie der Zustandserfassung und -bewertung (ZEB) mit dem Seitenkraftmessverfahren (SKM). Mit der Veröffentlichung der TP Griff-StB (SKM) durch die FGSV am 29.4.2008 ist derzeit das aktuellste Dokument für Griffigkeitsmessungen im Rahmen von Bauverträgen sowie der Zustandserfassung und -bewertung von Bundesfernstraßen (ZEB) mit dem Seitenkraftmessverfahren herausgegeben worden. Dieses Dokument löst die TP Griff-StB (SCRIM) mit ihren drei Allgemeinen Rundschreiben ab und fasst die Ergebnisse aus verschiedenen Forschungsprojekten und Erfahrungen aus den regelmäßigen Messungen der Messgerätebetreiber zusammen.
Die Einwirkung von Frost verursacht durch unterschiedliche Prozesse während des Gefrier- und des Tauprozesses Schäden an Straßen. Durch eine entsprechende Dimensionierung des frostsicheren Straßenoberbaus werden solche Schäden verhindert und die Wirtschaftlichkeit im Straßenbau und in der Straßenunterhaltung wird gesteigert. In den "Richtlinien für die Standardisierung des Oberbaus von Verkehrsflächen" (RStO) werden unterschiedliche Faktoren durch Frosteinwirkung auf den Straßenbau berücksichtigt. Durch die Frostzonenkarte werden in der Bundesrepublik Deutschland drei Frosteinwirkungsgebiete voneinander unterschieden. Entsprechende Erhöhungen der Mindestdicke des frostsicheren Oberbaus berücksichtigen die diesen Frostzonen zugeordneten Frosteindringtiefen. Die seit der Ausgabe von 1986 in den RStO dargestellte Frostzonenkarte wurde auf der Grundlage der Frosteinwirkung des Extremwinters 1962/63 entwickelt. Frostschäden an Straßen, die gemäß den Festlegungen der RStO dimensioniert wurden, sind nicht bekannt. Da jedoch möglicherweise die Dicke des frostsicheren Oberbaus überschätzt wird und die Darstellung der Frostzonenkarte nicht mehr dem Stand von Wissenschaft und Technik entspricht, wurde sie im Rahmen eines Forschungsvorhabens überarbeitet und detaillierter dargestellt. Diese neue Frostzonenkarte wird in den überarbeiteten RStO, deren Ausgabe im Jahr 2010 vorgesehen ist, berücksichtigt.