6th International Conference on ESAR
Filtern
Schlagworte
- Deutschland (33)
- Germany (33)
- Conference (32)
- Konferenz (32)
- Accident (20)
- Unfall (20)
- Unfallrekonstruktion (19)
- injury) (15)
- Accident reconstruction (14)
- Schweregrad (Unfall (14)
- Verletzung) (14)
- Severity (accid (13)
- Car (10)
- Pkw (10)
- Injury (9)
- Verletzung (9)
- Simulation (8)
- Driver assistance system (7)
- Fahrerassistenzsystem (7)
- Fatality (6)
- Fußgänger (6)
- Pedestrian (6)
- Statistics (6)
- Statistik (6)
- Tödlicher Unfall (6)
- Active safety system (5)
- Aktives Sicherheitssystem (5)
- Berechnung (5)
- Cyclist (5)
- Digital model (5)
- Efficiency (5)
- Interview (5)
- Leistungsfähigkeit (allg) (5)
- Numerisches Modell (5)
- On the spot accident investigation (5)
- Prognose (5)
- Radfahrer (5)
- Reconstruction (accid) (5)
- Untersuchung am Unfallort (5)
- Accident prevention (4)
- Anfahrversuch (4)
- Calculation (4)
- Data acquisition (4)
- Datenerfassung (4)
- Estimation (4)
- Fahrzeug (4)
- Safety (4)
- Sicherheit (4)
- Test (4)
- Unfallverhütung (4)
- Vehicle (4)
- Versuch (4)
- Analyse (math) (3)
- Analysis (math) (3)
- Antikollisionssystem (3)
- Benutzung (3)
- Bewertung (3)
- Collision avoidance system (3)
- Collision test (veh) (3)
- Evaluation (assessment) (3)
- Finite element method (3)
- Use (3)
- Air bag (restraint system) (2)
- Airbag (2)
- Bein (2)
- Biomechanics (2)
- Biomechanik (2)
- Blickfeld (2)
- Camera (2)
- Cause (2)
- Crash test (2)
- Database (2)
- Datenbank (2)
- Driver (2)
- Edge (2)
- Eingabedaten (2)
- Electric bicycle (2)
- Elektrofahrrad (2)
- Fahrdatenschreiber (2)
- Fahrer (2)
- Field of vision (2)
- Front (2)
- Frontalzusammenstoß (2)
- Head (2)
- Head on collision (2)
- Hospital (2)
- Human factor (2)
- India (2)
- Indien (2)
- Input data (2)
- Japan (2)
- Kamera (2)
- Kopf (2)
- Krankenhaus (2)
- Leg (human) (2)
- Lkw (2)
- Lorry (2)
- Menschlicher Faktor (2)
- Methode der finite Elemente (2)
- Passive safety system (2)
- Passives Sicherheitssystem (2)
- Risiko (2)
- Risk (2)
- Seite (2)
- Sensor (2)
- Severity (acid (2)
- Ursache (2)
- Abdomen (1)
- Ability (road user) (1)
- Acceptability (1)
- Accuracy (1)
- Aggression (psycho) (1)
- Aggression (psychol) (1)
- Air traffic control (1)
- Alte Leute (1)
- Angle (1)
- Auffahrunfall (1)
- Aufzeichnung (1)
- Austria (1)
- Autobahn (1)
- Back (human) (1)
- Baumusterzulassung (1)
- Behaviour (1)
- Beinahe Unfall (1)
- Belastung (1)
- Bicycle (1)
- Blutkreislauf (1)
- Braking distance (1)
- Bremsweg (1)
- Brustkorb (1)
- Bus (1)
- China (1)
- Circulation (blood) (1)
- Coach (1)
- Compatibility (1)
- Computation (1)
- Contact (tyre (1)
- Cost benefit analysis (1)
- Cycling (1)
- Data transmission (telecom) (1)
- Datenübertragung (Telekom) (1)
- Decision process (1)
- Deformation (1)
- Delivery vehicle (1)
- Detection (1)
- Detektion (1)
- Digital image processing (1)
- Digitale Bildverarbeitung (1)
- Dreidimensional (1)
- Driving (veh) (1)
- Dynamics (1)
- Dynamik (1)
- EU directive (1)
- EU-Richtlinie (1)
- Eins (1)
- Einstellung (psychol) (1)
- Electric vehicle (1)
- Elektrofahrzeug (1)
- Entscheidungsprozess (1)
- Ergonomics (1)
- Ergonomie (1)
- Event data recorder (Road vehicle) (1)
- Event data recorder (road vehicle) (1)
- Expressway (1)
- Fahrgeschicklichkeit (1)
- Fahrrad (1)
- Fahrsimulator (1)
- Fahrzeugführung (1)
- Fahrzeuginnenraum (1)
- Fahrzeugteil (Sicherheit) (1)
- Fehler (1)
- Financing (1)
- Finanzierung (1)
- Flugsicherung (1)
- Forecast (1)
- Form (1)
- Fracture (bone) (1)
- Frau (1)
- Geometry (shape) (1)
- Geschwindigkeit (1)
- Harmonisation (1)
- Illness (1)
- Impact (collision) (1)
- Impact test (veh) (1)
- Improvement (1)
- Insasse (1)
- Interior (veh) (1)
- International (1)
- Intersection (1)
- Jahreszeit (1)
- Knochenbruch (1)
- Knotenpunkt (1)
- Kompatibilität (1)
- Kontakt Reifen Straße (1)
- Korea (Süd) (1)
- Krankheit (1)
- Körperstellung (1)
- Lateral (1)
- Lateral collision (1)
- Length (1)
- Lieferfahrzeug (1)
- Load (1)
- Location (1)
- Länge (1)
- Mathematical model (1)
- Medical aspects (1)
- Medizinische Gesichtspunkte (1)
- Method (1)
- Methode der finiten Elemente (1)
- Moped (1)
- Motorcyclist (1)
- Motorrad (1)
- Motorradfahrer (1)
- Nasse Straße (1)
- Near miss (1)
- Netherlands (1)
- Niederlande (1)
- Nordamerika (1)
- North America (1)
- Occupant (veh) (1)
- Official approval (1)
- Old people (1)
- One (1)
- Ort (Position) (1)
- Partnerschaft (1)
- Partnership (1)
- Portugal (1)
- Post crash (1)
- Posture (1)
- Pregnancy (1)
- Protective helmet (1)
- Quality assurance (1)
- Qualitätssicherung (1)
- Radfahren (1)
- Reaction (human) (1)
- Reaktionsverhalten (1)
- Rear end collision (1)
- Rechenmodell (1)
- Recording (1)
- Regression analysis (1)
- Regressionsanalyse (1)
- Reifen (1)
- Reifenprofil (1)
- Reisebus (1)
- Republic of Korea (1)
- Reversing (veh) (1)
- Risk taking (1)
- Rücken (1)
- Rücksichtslosigkeit (1)
- Rückwärtsfahren (1)
- Safety belt (1)
- Schutzhelm (1)
- Schwangerschaft (1)
- Schweregrad (Unfall, Verletzung) (1)
- Season (1)
- Seitlicher Zusammenstoß (1)
- Sicherheitsgurt (1)
- Sichtbarkeit (1)
- Simulator (driving) (1)
- Software (1)
- Speed (1)
- Stadt (1)
- Standardisierung (1)
- Telefon (1)
- Telephone (1)
- Thorax (1)
- Three dimensional (1)
- Transport infrastructure (1)
- Trend (stat) (1)
- Two dimensional (1)
- Tyre (1)
- Tyre tread (1)
- Underride prevention (1)
- Unfallfolgemaßnahme (1)
- United Kingdom (1)
- Unterfahrschutz (1)
- Unterleib (1)
- Urban area (1)
- Vehicle safety device (1)
- Verbesserung (1)
- Vereinigtes Königreich (1)
- Verfahren (1)
- Verformung (1)
- Verhalten (1)
- Verkehrsinfrastruktur (1)
- Sichtbarkeit (1)
- Visualisation (1)
- Visualisierung (1)
- Vorn (1)
- Vorne (1)
- Weather (1)
- Wet road (1)
- Window (veh) (1)
- Windschutzscheibe (1)
- Winkel (1)
- Wirtschaftlichkeitsrechnung (1)
- Witterung (1)
- Woman (1)
- Zeitreihe (stat) (1)
- Zusammenstoß (1)
- Zweidimensional (1)
- road) (1)
- simulation (1)
- Österreich (1)
Institut
- Sonstige (35)
- Abteilung Fahrzeugtechnik (1)
- Präsident (1)
Assessment of the effectiveness of Intersection Assistance Systems at urban and rural accident sites
(2015)
An Intersection Collision Avoidance System is a promising safety system for accident avoidance or injury mitigation at junctions. However, there is still a lack of evidence of the effectiveness, due to the missing real accident data concerning Advanced Driver Assistance Systems. The objective of this study is the assessment of the effectiveness of an Intersection Collision Avoidance System based on real accidents. The method used is called virtual pre-crash simulation. Accidents at junctions were reconstructed by using the numerical simulation software PC-Crashâ„¢. This first simulation is called the baseline simulation. In a second step the vehicles of these accidents were equipped with an Intersection Collision Avoidance System and simulated again. The second simulation is called the system simulation. In the system simulation two different sensors and four different intervention strategies were used, based on a time-to-collision approach. The effectiveness of Intersection Collision Avoidance System has been evaluated by using an assessment function. On average 9% of the reviewed junction accidents could have been avoided within the system simulations. The other simulation results clearly showed a change in the principal direction of force, delta-v and reduction of the injury severity.
Although the annual traffic accident statistics published by the national police is available in public, the detailed traffic accident data has not been released in Korea. Recently the Ministry of Land, Infrastructure and Transport recognized the importance of in-depth accident data to enhance road traffic safety and initiated a research project to establish a collection of the detailed accident data. The main objective of the project is a feasibility study to establish KIDAS (Korea In-Depth Accident Study). Within this project, three university hospitals which are located in mid-size cities have been selected to collect accident data. Annually, more than 500 cases of accidents have been collected from the in-patient's interviews and diagnosis. Unlike GIDAS (German In-Depth Accident Study), currently on-site investigation can"t be performed by the Korean police. The only available data is patient medical records, patient's description of accident circumstances and the damaged vehicle. Occasionally the police provide the accident investigation reports containing very brief information on accident causation and vehicle safety. In a first step, the concept of KIDAS is to adopt the format of iGLAD (Initiative for the Global Harmonization of Accident Data) for harmonization. Since the currently collected accident information is extremely limited compared with GIDAS, the other sources of data and calculations such as KNCAP vehicle data, pc-crash simulations, vehicle registration information, insurance company data are utilized to complete the iGLAD template. Results from KIDAS_iGLAD and the cases of assessment of active safety devices such as AEBS, ESC, and LDWS will be evaluated.
This study aimed at prediction of long bone fractures and assessment of lower extremity injury mechanisms in real world passenger car to pedestrian collision. For this purpose, two pedestrian accident cases with detail recorded lower limb injuries were reconstructed via combining MBS (Multi-body system) and FE (Finite element) methods. The code of PC Crash was used to determine the boundary conditions before collision, and then MBS models were used to reproduce the pedestrian kinematics and injuries during crash. Furthermore, a validated lower limb FE model was chosen to conduct reconstruction of injuries and prediction of long bone fracture via physical parameters of von Mises stress and bending moment. The injury outcomes from simulations were compared with hospital recorded injury data and the same long bone fracture patterns and positions can be observed. Moreover, the calculated long bone fracture tolerance corresponded to the outcome from cadaver tests. The result shows that FE model is capable to reproduce the dynamic injury process and is an effective tool to predict the risk of long bone fractures.
For the estimation of the benefit and effect of innovative Driver Assistance Systems (DAS) on the collision positions and by association on the accident severity, together with the economic benefit, it becomes necessary to simulate and evaluate a variety of virtual accidents with different start values (e.g. initial speed). Taken into account the effort necessary for a manual reconstruction, only an automated crash computation can be considered for this task. This paper explains the development of an automated crash computation based on GIDAS. The focus will be on the design of the virtual vehicle models, the method of the crash computation as well as exemplary applications of the automated crash computation. For the first time an automated crash computation of passenger car accidents has been realized. Using the automated crash computation different tasks within the field of vehicle safety can be elaborated. This includes, for example, the calculation of specific accident parameters (such as EES or delta-V) for various accident constellations and the estimation of the economic benefit of DAS using IRFs (Injury Risk Functions).
The Traffic Accident Research Institute at University of Technology Dresden investigates about 1,000 accidents annually in the area around and in Dresden. These datasets have been summarized and evaluated in the GIDAS (German Accident In-Depth Study) project for 13 years. During the project it became apparent that the specific traffic situation of a covert exit of a passenger car and an intersecting two-wheeler involves a high risk potential. This critical situation develops in a large part due to the lack of visibility between the driver and the intersecting bike. In this paper the accident avoidance potential of front camera systems with lateral field of view, which allows the driver to have an indirect sight into the crossing street area will be presented.
Enhanced protection of pedestrians and cyclists remains on the focus. Besides infrastructural and behavioral aspects it is necessary to exploit technical solutions placed on motorized vehicles. Accident research needs reliable data as well as national road accident statistics. Changing the view on seriously injured road users is one of the challenges which will substantially contribute to the optimization on future traffic safety. The missing accuracy in the definition of personal injury has a detrimental effect on making cost efficient road safety policy which is not only focused on fatal accidents. The European commission requested that, starting in 2015, all EU member states provide more detailed data on the injury status of road casualties, with special regard to the group of seriously injured. Conventional accident data will always be essential. But to obtain detailed data about driver behavior in real traffic situations further data sources are required. These could be EDR data, data from electronic control units, data from traffic surveys and traffic counting, naturalistic diving studies and field operational tests. Gaining insight into normal as well as critical driver behavior will enable accident researchers to deduct functions estimating the increase or decrease of accident risk associated with certain behaviors or vehicle functions. Also with view to the introduction of highly automated driving functions in the future such data is urgently needed. Computer simulation based tools to estimate the benefits of active safety systems are another step on the way towards the safety assessment of automated driving. It is now the duty of the scientific community to ask the right questions, to develop a methodology and to merge all these data sources into a common framework for the assessment of future traffic safety innovations.
This work aimed for getting the main features of accidents involving Light Goods Vehicles (LGV), using accident cases collected in the In-Depth Accidents Studies built up at IFSTTAR-LMA (France), in order to analyse thoroughly the proceedings of these accidents and identify the major factors for the different types of LGV. This work was based on the analysis of 88 accident cases involving LGV with a Maximum Authorised Mass inferior to 3.5 tonnes. In particular kinematics reconstruction of these accidents were performed to calculate the average impact speeds and to better understand the compatibility problems between LGV and antagonist vehicles. Specific features have been reviewed to pick up problems concerning safety, maintenance, loading, LGV design: general conditions of the accident, vehicle features, and passive safety. The main results of this study are presented in this paper.
SEEKING is looking for answers regarding electric powered bicycles and their relation to traffic safety issues. Does a cyclist need "E"? Is it as risky as riding a moped or are E-bikes creating conflicts with other cyclists? The project described herein, funded by the Austrian Ministry of Transport, has the aim of seeking answers to these hot topics. The SEEKING-team shows an in-depth investigation of vehicle dynamic sensing, together with subjective feedback of test riders to detect similarities and differences between conventional cycling and E-biking. Following an overview on the international status quo, measurement runs and their analyses are performed to find a set of preventative measures to make (E-)biking safer. A specific focus is the detection of curve handling, stopping and acceleration phases as well as conflict studies on course-based test rides and "real world" tests on cycling paths (naturalistic riding).
Introduction: The method of causation analysis applied under the German accident survey GIDAS, which is based on Accident Causation Analysis System (ACAS) focuses on an on-scene data collection of predominantly directly event-related causation factors which were crucial in the accident emergence as situational resulting events and influences. The paradigm underlying this method refers to the findings of the psychological traffic accident research that most causally relevant features of the system components human, infrastructure and vehicle technology are found directly in the situation shortly before the accident. This justifies the survey method which is conducted directly at the accident (on-scene), shortly after the accident occurrence (in-time) with the detection of human-related causes (in-depth). Human aspects of the situation analysis that interact and influence the risk situations shortly before the collision are reported as errors, lapses, mistakes and failures in ACAS in specific categories and subcategories. Thus methodically ACAS is designed primarily for the collection of accident features on the level of operational action, which certainly leads to valid findings and behavioral causes of accidents. The enhancement by means of Moderating Conditions concerns the pre-crash phase in different levels: strategical, tactical and operational.
Today's volumes of traffic require more and more responsibility from each individual road user in their interactions. Those who drive motor vehicles have the singular obligation to minimise the risk of accidents and hence the severity of injuries, particularly with a view to the most vulnerable road users such as motor bikes, bikes and pedestrians. Since responsible and pro-active driving depends first and foremost on the visual information relayed by our eyes and the visual channel this requires good command of the traffic and all-round visibility from our driver's seat. Granted that human error can never be fully excluded, improving visibility around the car is nevertheless an urgent priority. To do so, we need to rate visibility in the most realistic driving situations. Since the existing visibility metrics and methodology are not applicable to real-life driving situations, this study aimed at developing a new visibility rating methodology based on real-life accident scenarios. On the basis of the cases documented by the accident research project, this study analysed criteria indicative of diminishing visibility on the one hand and revealing some peculiarities in connection with the visibility issue on the other. Based on the above, the project set out to develop a rating methodology allowing to assess all-round visibility in various road situations taking into account both driver and road geometries. In this context, the assessment of visibility while turning a corner, crossing an intersection and joining traffic on a major road (priority through route) is of major importance. The first tests have shown that critical situations can be avoided by adapting the relevant geometries and technical solutions and that significant improvements of road safety can be derived therefrom.