91 Fahrzeugkonstruktion
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (164) (entfernen)
Schlagworte
- Conference (100)
- Konferenz (97)
- Germany (53)
- Deutschland (52)
- Accident (48)
- Unfall (48)
- Safety (44)
- Sicherheit (44)
- Fahrzeug (38)
- Vehicle (36)
- Simulation (34)
- Anfahrversuch (33)
- Bewertung (33)
- Evaluation (assessment) (33)
- Active safety system (31)
- Aktives Sicherheitssystem (30)
- Fußgänger (30)
- Passives Sicherheitssystem (30)
- Pedestrian (30)
- Impact test (veh) (28)
- Test method (27)
- Collision (26)
- Fahrerassistenzsystem (26)
- Injury (26)
- Passive safety system (26)
- Prüfverfahren (26)
- Verletzung (26)
- Schweregrad (Unfall, Verletzung) (25)
- Unfallrekonstruktion (25)
- Severity (accid, injury) (24)
- Analyse (math) (23)
- Car (23)
- Zusammenstoß (23)
- Analysis (math) (22)
- Driver assistance system (22)
- Accident prevention (21)
- Leistungsfähigkeit (allg) (20)
- Unfallverhütung (20)
- Frontalzusammenstoß (19)
- Verletzung) (19)
- injury) (19)
- Efficiency (18)
- Head on collision (18)
- Schweregrad (Unfall (18)
- Severity (accid (18)
- Anthropometric dummy (17)
- Reconstruction (accid) (17)
- Versuch (17)
- Datenbank (16)
- Dummy (16)
- Test (16)
- Driver (14)
- Pkw (14)
- Europa (13)
- Europe (13)
- Fahrer (13)
- Radfahrer (13)
- Child (12)
- Data bank (12)
- Insasse (12)
- Kind (12)
- Statistics (12)
- Cyclist (11)
- On the spot accident investigation (11)
- Prevention (11)
- Statistik (11)
- Antikollisionssystem (10)
- Biomechanics (10)
- Biomechanik (10)
- Collision avoidance system (10)
- Improvement (10)
- Vehicle occupant (10)
- Verbesserung (10)
- Autonomes Fahren (9)
- Autonomous driving (9)
- Development (9)
- Entwicklung (9)
- Forschungsarbeit (9)
- Research project (9)
- Seitlicher Zusammenstoß (9)
- Untersuchung am Unfallort (9)
- Vehicle regulations (9)
- Accident reconstruction (8)
- Auffahrunfall (8)
- Automatisch (8)
- International (8)
- Kompatibilität (8)
- Lorry (8)
- Method (8)
- Side impact (8)
- Standardisierung (8)
- Technische Vorschriften (Kraftfahrzeug) (8)
- Verfahren (8)
- Wirtschaftlichkeitsrechnung (8)
- Automatic (7)
- Compatibility (7)
- Cost benefit analysis (7)
- Datenerfassung (7)
- Fahrzeugsitz (7)
- Fehler (7)
- Geschwindigkeit (7)
- Head (7)
- Kopf (7)
- PKW (7)
- Rear end collision (7)
- Risiko (7)
- Sicherheitsgurt (7)
- Speed (7)
- Verhütung (7)
- Verminderung (7)
- Alte Leute (6)
- Bemessung (6)
- Benutzung (6)
- Braking (6)
- Bremsung (6)
- Cause (6)
- Data acquisition (6)
- Decrease (6)
- Deformation (6)
- Design (overall design) (6)
- Error (6)
- Fahrstabilität (6)
- Fatality (6)
- Interior (veh) (6)
- Knee (human) (6)
- Lkw (6)
- Mathematical model (6)
- Motorrad (6)
- Official approval (6)
- Rechenmodell (6)
- Risk (6)
- Road user (6)
- Safety belt (6)
- Seat (veh) (6)
- Standardization (6)
- Tödlicher Unfall (6)
- Ursache (6)
- Use (6)
- Vehicle handling (6)
- Verkehrsteilnehmer (6)
- Überschlagen (6)
- Airbag (5)
- Aufprallschlitten (5)
- Body (car) (5)
- Brustkorb (5)
- Deformierbare Barriere (Anpralltest) (5)
- EU (5)
- Fahrzeuginnenraum (5)
- Gesetzgebung (5)
- Impact sled (5)
- Impact test (5)
- Interview (5)
- Karosserie (5)
- Legislation (5)
- Motorcycle (5)
- Old people (5)
- Policy (5)
- Politik (5)
- Prognose (5)
- Sensor (5)
- Technologie (5)
- Technology (5)
- Thorax (5)
- Verformung (5)
- Behaviour (4)
- Bremse (4)
- Cervical vertebrae (4)
- Database (4)
- Detection (4)
- Digital model (4)
- Driver information (4)
- Electronic stability program (4)
- Fahrzeugführung (4)
- Halswirbel (4)
- Japan (4)
- Knie (menschl) (4)
- Modification (4)
- Motorcyclist (4)
- Motorradfahrer (4)
- Numerisches Modell (4)
- Overturning (veh) (4)
- Reproducibility (4)
- Reproduzierbarkeit (4)
- Verhalten (4)
- Accident rate (3)
- Advanced driver assistance system (3)
- Air bag (restraint system) (3)
- Attitude (psychol) (3)
- Ausrüstung (3)
- Autonomes Fahrzeug (3)
- Autonomous vehicle (3)
- Baumusterzulassung (3)
- Bein (menschl) (3)
- Belastung (3)
- Berechnung (3)
- Brake (3)
- Bus (3)
- Correlation (math, stat) (3)
- Crashtest (3)
- Damage (3)
- Deformable barrier (impact test) (3)
- Delivery vehicle (3)
- Detektion (3)
- Driver training (3)
- Driving (veh) (3)
- Einstellung (psychol) (3)
- Electric vehicle (3)
- Elektrofahrzeug (3)
- Elektronisches Stabilitätsprogramm (3)
- Equipment (3)
- Fahranfänger (3)
- Fahrausbildung (3)
- Forecast (3)
- Front (3)
- Gewicht (3)
- Head restraint (3)
- Human body (3)
- Impact study (3)
- Intelligent transport system (3)
- Knotenpunkt (3)
- Kopfstütze (3)
- Korrelation (math, stat) (3)
- Leg (human) (3)
- Lenken (Fahrzeug) (3)
- Load (3)
- Menschlicher Körper (3)
- Recently qualified driver (3)
- Sachschaden (3)
- Sichtbarkeit (3)
- Steering (process) (3)
- Steifigkeit (3)
- Stiffness (3)
- Straßenverkehr (3)
- Traffic (3)
- USA (3)
- Unfallhäufigkeit (3)
- United Kingdom (3)
- Unterfahrschutz (3)
- Vereinigtes Königreich (3)
- Verkehr (3)
- Veränderung (3)
- Sichtbarkeit (3)
- Warning (3)
- Warnung (3)
- Weight (3)
- Abdomen (2)
- Active safety (2)
- Adolescent (2)
- Age (2)
- Aktive Sicherheit (2)
- Alter (2)
- Anti locking device (2)
- Antiblockiereinrichtung (2)
- Arbeitsgruppe (2)
- Automatische Notbremsung (2)
- Autonomous emergency braking (2)
- Bicyclist (2)
- Bremsweg (2)
- Calculation (2)
- Classification (2)
- Coach (2)
- Data security (2)
- Datensicherheit (2)
- Dynamics (2)
- Dynamik (2)
- Effectiveness (2)
- Electronic driving aid (2)
- Elektronische Fahrhilfe (2)
- Empfindlichkeit (2)
- Entdeckung (2)
- Erste Hilfe (2)
- Estimation (2)
- Fahrdatenschreiber (2)
- Fahrerinformation (2)
- Feuer (2)
- Fire (2)
- First aid (2)
- Form (2)
- France (2)
- Frankreich (2)
- Frau (2)
- Headlamp (2)
- Highway traffic (2)
- Hinten (2)
- Individueller Verkehr (2)
- Information (2)
- Intelligentes Transportsystem (2)
- Intersection (2)
- Jugendlicher (2)
- Kamera (2)
- Klassifizierung (2)
- Knie (2)
- Kontrolle (2)
- Kraftfahrzeug (2)
- LKW (2)
- Landstraße (2)
- Lieferfahrzeug (2)
- Location (2)
- Measurement (2)
- Messung (2)
- Nacht (2)
- Night (2)
- Norm (tech) (2)
- Occupant (veh) (2)
- Ort (Position) (2)
- Passenger (2)
- Perception (2)
- Post crash (2)
- Private transport (2)
- Prototyp (2)
- Prototype (2)
- Rear (2)
- Regression analysis (2)
- Regressionsanalyse (2)
- Reifen (2)
- Reisebus (2)
- Restraint system (2)
- Richtlinien (2)
- Risikobewertung (2)
- Risk assessment (2)
- Road network (2)
- Rural road (2)
- Sample (mater) (2)
- Scheinwerfer (2)
- Schutz (2)
- Schweden (2)
- Seite (2)
- Sensitivity (2)
- Side (2)
- Spain (2)
- Spanien (2)
- Specification (standard) (2)
- Specifications (2)
- Spinal column (2)
- Straßennetz (2)
- Surveillance (2)
- Technische Vorschriften (2)
- Tyre (2)
- Underride protection (2)
- Unfallverhuetung (2)
- Unterleib (2)
- Untersuchung am unfallort (2)
- Vorn (2)
- Wahrnehmung (2)
- Windschutzscheibe (2)
- Wirbelsäule (2)
- Wirksamkeitsuntersuchung (2)
- Working group (2)
- Zulassung (tech) (2)
- Zusammenstoss (2)
- Ablenkung (psychol) (1)
- Abstandsregeltempomat (1)
- Accident data (1)
- Accompanied driving (1)
- Accuracy (1)
- Active safety system; Automatic; Brake; Car; Collision avoidance system; Conference; Driver assistance system; Germany; Impact test (veh); Rear end collision; Severity (accid (1)
- Activity report (1)
- Adaptive cruise control (1)
- Administration (1)
- Adult (1)
- Advanced vehicle control systems (1)
- Aged people (1)
- Airbag (restraint system) (1)
- Angle (1)
- Antikollisisonssystem (1)
- Apparatus (measurement) (1)
- Atives Sicherheitssystem (1)
- Attention (1)
- Aufmerksamkeit (1)
- Aufzeichung (1)
- Austria (1)
- Autobahn (1)
- Battery (1)
- Bau (1)
- Befreiung (Bergung) (1)
- Begleitetes Fahren (1)
- Benefit cost analysis (1)
- Bewehrung (1)
- Bicycle (1)
- Bildschirm (1)
- Blickfeld (1)
- Blind spot (veh) (1)
- Braking distance (1)
- Bruch (mech) (1)
- Budget (1)
- Calibration (1)
- Camera (1)
- Chassis (1)
- Clothing (1)
- Collision test (veh) (1)
- Comfort (1)
- Communication (1)
- Compatiblity (1)
- Components of the vehicle (1)
- Compression (1)
- Computation (1)
- Construction (1)
- Contact (tyre (1)
- Cooperative intelligent transport system (1)
- Crash Test (1)
- Crash helmet (1)
- Crash test (1)
- Cross roads (1)
- Crossing the road (pedestrian) (1)
- Customer (1)
- Damping (1)
- Data collection (1)
- Data processing (1)
- Data transmission (1)
- Datenverarbeitung (1)
- Datenübertragung (telekom) (1)
- Dauer (1)
- Dauerhaftigkeit (1)
- Daylight (1)
- Deformable barrier (Impact test) (1)
- Deformable barrier system (impact test) (1)
- Dehnungsmessstreifen (1)
- Demand (econ) (1)
- Demographie (1)
- Deutschland ; Konferenz (1)
- Diesel engine (1)
- Dieselmotor (1)
- Digital computer (1)
- Digitalrechner (1)
- Displacement (1)
- Distraction (1)
- Driver experience (1)
- Driving (1)
- Driving aid (electronic) (1)
- Dtetection (1)
- Durability (1)
- Dynamo (1)
- Dämpfung (1)
- EU directive (1)
- EU-Richtlinie (1)
- Echtzeit (1)
- Education (1)
- Eichung (1)
- Eigenschaft (1)
- Eins (1)
- Ejection (1)
- Electric bicycle (1)
- Elektrofahrrad (1)
- Elektronisches Stabilitätsprogram (1)
- Emission control (1)
- Emissionskontrolle (1)
- Engine capacity (1)
- Environment protection (1)
- Ergonomics (1)
- Erwachsener (1)
- Erziehung (1)
- Eu (1)
- European New Car Assessment Programme (1)
- European Union (1)
- Event data recorder (Road vehicle) (1)
- Event data recorder (road vehicle) (1)
- Extrication (1)
- Fahrbahnüberquerung (1)
- Fahrer ; Fahrerassistenzsystem (1)
- Fahrerinformationen (1)
- Fahrleistung (1)
- Fahrrad (1)
- Fahrsimulator (1)
- Fahrstreifen (1)
- Fahrstreifenwechsel (1)
- Fahrwerk (1)
- Fahrzeugbeleuchtung (1)
- Fahrzeugdach (1)
- Fahrzeugflotte (1)
- Fahrzeugteil (Sicherheit) (1)
- Fahrzeugteile (1)
- Failure (1)
- Field of vision (1)
- Finite element method (1)
- Fleet of vehicles (1)
- Future transport mode (1)
- Geometry (shape) (1)
- Gesetzesdurchführung (1)
- Gestaltung (1)
- Government (national) (1)
- Grenzwert (1)
- Harmonisation (1)
- Harmonisierung (1)
- Harmonization (1)
- Hazard (1)
- Head (human) (1)
- Height (1)
- Herausschleudern (1)
- Highway (1)
- Homogeneity (1)
- Homogenität (1)
- Hubraum (1)
- Human machine interface (1)
- Höhe (1)
- Hüfte (menschl) (1)
- In Bewegung (1)
- Inertia reel safety belt (1)
- Information documentation (1)
- Information management (1)
- Injury) (1)
- Installation (1)
- Intelligentes Verkehrssystem (1)
- Interactive model (1)
- Interaktives Modell (1)
- Itinerary (1)
- Junction (1)
- Kleidung (1)
- Kleintransporter (1)
- Komfort (1)
- Kommunikation (1)
- Kompatiblität (1)
- Kontakt Reifen Straße (1)
- Kooperatives System (ITS) (1)
- Kopf (menschl) (1)
- Kreuzung (1)
- Kunde (1)
- Kunststoff (1)
- Lane changing (1)
- Lap strap (1)
- Lateral collision (1)
- Law enforcement (1)
- Layout (1)
- Leistungsfähigkeit (Allg.) (1)
- Leuchtdichte (1)
- Limit (1)
- Luminance (1)
- Market (1)
- Markt (1)
- Massenunfall (1)
- Matrix (1)
- Mensch Maschine Schnittstelle (1)
- Mensch Maschine Verhältnis (1)
- Messgerät (1)
- Methode der finiten Elemente (1)
- Mobility (1)
- Mobilität (1)
- Model (not math) (1)
- Modell (1)
- Montage (1)
- Moped (1)
- Motorway (1)
- Moving (1)
- Multiple collision (1)
- Nachfrage (1)
- Nachhaltigkeit (1)
- Nasse Straße (1)
- Naturalistic Driving (1)
- Naturalistic driving (1)
- Nigeria (1)
- On the scene accident investigation (1)
- One (1)
- Organisation (1)
- Organization (1)
- Output (1)
- Overlapping (1)
- Overturning (1)
- Passive restraint system (1)
- Pelvis (1)
- Pfahl (1)
- Pile (1)
- Plastic material (1)
- Police (1)
- Polizei (1)
- Population (1)
- Portugal (1)
- Probability (1)
- Probe (1)
- Properties (1)
- Prüefverfahren (1)
- Prüfkörper (1)
- Public transport (1)
- Quality (1)
- Quality assurance (1)
- Qualität (1)
- Qualitätssicherung (1)
- Radar (1)
- Radio (1)
- Reaction (human) (1)
- Reaktionsverhalten (1)
- Real time (1)
- Rear view mirror (1)
- Recording (1)
- Reduction (decrease) (1)
- Reflectorized material (1)
- Reflexstoffe (1)
- Regierung (staat) (1)
- Reifenprofil (1)
- Reinforcement (in mater) (1)
- Reiseweg (1)
- Rippe (menschl) (1)
- Road (1)
- Road traffic (1)
- Robot (1)
- Roboter (1)
- Roll over (veh) (1)
- Roof (veh) (1)
- Rotation (1)
- Route guidance (1)
- Rundfunk (1)
- Rückspiegel (1)
- Safety harness (1)
- Safety system (1)
- Schlag (1)
- Schleudertrauma (1)
- Schulter (1)
- Schutzhelm (1)
- Schweregrad /Unfall (1)
- Seat (1)
- Seat belt (1)
- Seat harness (1)
- Severity (accid, injuy) (1)
- Shape (1)
- Shock (1)
- Shoulder (human) (1)
- Simulator (driving) (1)
- Social factors (1)
- Soziale Faktoren (1)
- Stadardization (1)
- Stadt (1)
- Stand der Technik (Bericht) (1)
- State of the art report (1)
- Stochastic process (1)
- Stochastischer Prozess (1)
- Stopping distance (1)
- Strain gauge (1)
- Straße (1)
- Sustainability (1)
- Sweden (1)
- Tageslicht (1)
- Teenage driver (1)
- Telecommunication (1)
- Telefon (1)
- Telekommunikation (1)
- Telephone (1)
- Tension (1)
- Tests (1)
- Time (1)
- Toter Winkel (1)
- Toxicity (1)
- Toxizität (1)
- Traffic control (1)
- Traffic lanes (1)
- Train (1)
- Transport infrastructure (1)
- Tunnel (1)
- Typenzulassung (1)
- Tyre tread (1)
- Tätigkeitsbericht (1)
- Umweltschutz (1)
- Underride prevention (1)
- Unfalldaten (1)
- Unfallfolgemaßnahme (1)
- Unfallfolgephase (1)
- Unfallverhütug (1)
- United kingdom (1)
- Untersuchung am Umfallort (1)
- Urban area (1)
- Usa (1)
- Vehicle Regulations (1)
- Vehicle lighting (1)
- Vehicle mile (1)
- Vehicle safety (1)
- Vehicle safety device (1)
- Veraenderung (1)
- Vereinigtes Königreichl (1)
- Verkehrsinfrastruktur (1)
- Verkehrssteuerung (1)
- Vermeidung (1)
- Verschiebung (1)
- Versuchspuppe (1)
- Verwaltung (1)
- Video camera (1)
- Visual display (1)
- Vorne (1)
- Wahrscheinlichkeit (1)
- Wet road (1)
- Whiplash injury (1)
- Window (veh) (1)
- Windscreen (veh) (1)
- Winkel (1)
- Wirkungsanalyse (1)
- Woman (1)
- Women (1)
- Zeit (1)
- Zielführungssystem (1)
- Zug (Eisenbahn) (1)
- Zug (mech) (1)
- Zukünftiges Verkehrsmittel (1)
- Zusammendrückung (1)
- ZusammenstoÃüï-¿-½Ãƒ-¯Ã‚-¿Ã‚-½ (1)
- efficiency (1)
- head (1)
- road) (1)
- Öffentlicher Verkehr (1)
- Österreich (1)
- Überdeckung (1)
Institut
Although the number of road accident casualties in Europe (EU27) is falling the problem still remains substantial. In 2011 there were still over 30,000 road accident fatalities. Approximately half of these were car occupants and about 60 percent of these occurred in frontal impacts. The next stage to improve a car's safety performance in frontal impacts is to improve its compatibility. The objective of the FIMCAR FP7 EU-project was to develop an assessment approach suitable for regulatory application to control a car's frontal impact and compatibility crash performance and perform an associated cost benefit analysis for its implementation. This paper reports the cost benefit analyses performed to estimate the effect of the following potential changes to the frontal impact regulation: • Option 1 " No change and allow current measures to propagate throughout the vehicle fleet. • Option 2 " Add a full width test to the current offset Deformable Barrier (ODB) test. • Option 3 " Add a full width test and replace the current ODB test with a Progressive Deformable Barrier (PDB) test. For the analyses national data were used from Great Britain (STATS 19) and from Germany (German Federal Statistical Office). In addition in-depth real word crash data were used from CCIS (Great Britain) and GIDAS (Germany). To estimate the benefit a generalised linear model, an injury reduction model and a matched pairs modelling approach were applied. The benefits were estimated to be: for Option 1 "No change" about 2.0%; for Option 2 "FW test" ranging from 5 to 12% and for Option 3 "FW and PDB tests" 9 to 14% of car occupant killed and seriously injured casualties.
The utilisation of secondary-safety systems to protect occupants has attained a very high level over the past decades. Further improvements are still possible, but increasingly minor progress is only to be had with a high degree of effort. Thus, a key aspect must be the impact to overall safety in an accident. If reliable information is available on an imminent crash, measures already taken in the pre-crash phase can result in a significantly great influence on the outcomes of the crash. With this background preventive measures are the key to a sustainable further reduction of the figures of crash victims on our roads. This paper aims to show a preventive approach that can contribute to lessening the consequences of a crash by creating an optimum interaction of measures in the fields of primary and secondary safety. To further enhance vehicle safety, driver assistant systems are already available that warn the driver of an imminent front-to-rear-end crash. The next step is to support him in his reactions or if he fails to react sufficiently, to even initiate an automatic braking when the crash becomes unavoidable. Automatic pre-crash braking can, in an ideal situation, fully prevent a crash or can significantly reduce the impact speed and thus the impact energy (and the severity of the accident). If a vehicle is being braked in the pre-crash phase, the occupants are already being pre-stressed by the deceleration. The information available about the imminent crash can be used to activate the belt tensioners and likewise other secondary safety systems in the vehicle right before the impact. The pre-crash deceleration also causes the front of the vehicle to dip. Conventional crash tests do not take this specific impact situation into consideration. This is why, for example, the influences of the pre-crash displacements of the occupants are not recorded in the test results. Furthermore, a reproducible representation of the benefit of the vehicle safety systems which prepare the occupants for the imminent impact is not possible. In order to demonstrate the functions of automated pre-crash braking and to investigate the differences during the impact as a consequence of the altered occupant positions as well as the initiation of force and deformations of the vehicle front, DEKRA teamed up with BMW to carry out a joint crash test with the latest BMW 5 series vehicle. It involved the vehicle braking automatically from a starting test speed of 64 km/h (corresponding to the impact speed set by Euro NCAP) down to 40 km/h. The test was still run by the intelligent drive system of the crash test facility. This required several modifications to be made to the test facility as well as to the vehicle. The paper will describe and discuss some relevant results of the crash test. In addition, the possible benefits of such systems will also be considered. The test supplemented the work of the vFSS working group (vFSS stands advanced Forward-looking Safety Systems).
The sequence of accident events can be classified by three essential phases, the pre-crash-sequence, the crash-sequence and the post-crash-sequence. The level of reliability of the information in the GIDAS-database (German In Depth Accident Study) is provided predominantly on the passive side. The period to evaluate active safety systems begins already in the pre-crash-sequence. The assessment of the potential of sensor- or communication-based active safety systems can only be accomplished by a detailed analysis of the pre-crash-phase. Hence the necessity to analyze the early period of the accident event in detail arises. This is possible with the help of the digital sketches of the accident site and the simulation of the accident by a simulation method of the VUFO GmbH. After simulating the pre-crash scenario it is possible to generate additional and standardized data to describe the pre-crash-sequences of an accident in a very high detail. These data are documented in a second database called the GIDAS Pre-Crash-Matrix (PCM). The PCM contains various tables with all relevant data to reproduce the pre-crash-sequence of traffic accidents from the GIDAS database until 5 seconds before the first collision. This includes parameters to describe the environment data, participant data and motion or dynamic data. This paper explains the creation of the PCM, the simulation itself and the contents and structure of the PCM. With this information of the pre-crash-sequence for various accident scenarios an improved benefit estimation and development of active safety systems can be made possible.
Rear-end collisions are the most frequent same and opposite-direction crashes. Common causes include momentary inattention, inadequate speed or inadequate distance. While most rear-end collisions in urban traffic only result in vehicle damage or slight injuries, rear-end collisions outside built-up areas or on motorways usually cause fatal or serious injuries. Driver assistance systems that detect dangerous situations in the longitudinal vehicle direction are therefore an essential safety plus. In view of this, for ADAC, systems that alert drivers to dangerous situations and initiate autonomous braking complement ESC as one of the most important active safety features in modern vehicles. The aim of ADAC is to provide consumers with technical advice and competent information about the systems available on the market. Reliable comparative tests that are based on standardised test criteria may provide motorists with important information and help them make a buying decision. In addition, they raise consumer awareness of the systems and speed up their market penetration. The assessment must focus on as many aspects of effectiveness as possible and include not only autonomous braking but also collision warning and autonomous brake assist. The work of the ADAC accident research is the development of the testing scenarios with direct link to accident situations and the identification of useful test criteria for testing.
In 2012 the fifth ESAR conference (Expert Symposium on Accident Research) was held in Hannover. ESAR is an international convention of experts, who analyze traffic accidents all over the world and discuss their results in this context, conducted at the Medizinische Hochschule Hannover every 2 years. It connected representatives of public authorities, engineers in automotive development and scientists and offers a forum with particular emphasis on In-Depth-Analyses of accident statistics and accident analyses. Special focus is placed on research on the basis of so-called "In-Depth-Accident-Investigations" [data collections at the sites of the accidents], which are characterized by extensive documentations of the sites of the accidents, of the vehicles as well as of the injuries, encompassing several scientific fields. ESAR aims at a multi-disciplinary compilation of scientific results and at discussing them on an international, scientific level. It is thus a scientific colloquium and a platform for exchanging information for all accident researchers. Experiences in accident prevention as well as in the complex field of accident reconstruction are stated and new research fields are added. Existing results of long-term research work in Europe, the US, Australia and Japan include different infrastructural correlations and give findings on population, vehicle population and driver characteristics, which offer a basis for recommendations to be derived and measures for increasing road safety.
Die EU hat für die Verkehrssicherheit in Europa ein anspruchsvolles Ziel vorgegeben: Bis 2010 soll die Anzahl der im Straßenverkehr Getöteten gegenüber 2000 halbiert werden. Für Deutschland kann eine erfolgreiche Zwischenbilanz gezogen werden: In den letzten 5 Jahren nahm trotz Vergrößerung des Kraftfahrzeugbestandes um 6% die Anzahl der Verkehrstoten um 29% ab, in den vergangenen 10 Jahren ist ein Rückgang um 43% zu verzeichnen. Diese im internationalen Vergleich überdurchschnittlichen Erfolge sind nicht zuletzt auch auf Fortschritte in der Fahrzeugtechnik zurückzuführen, wobei die zunehmende Verbreitung von Systemen der Aktiven Sicherheit wie ABS, BAS, ESP einen entscheidenden Anteil hat. Nach der deutlichen Reduzierung von Fahrunfällen durch ESP-® stehen nun die Auffahrunfälle im Fokus der Sicherheitsentwicklung von Mercedes-Benz. Das Paket aus verbessertem rückwärtigen Signalbild (Adaptives Bremslicht) und Brems-Assistent (BAS) wurde kürzlich durch radarbasierte Bremsassistenz ergänzt (BAS PLUS und PRE-SAFE-®-Bremse). Der Beitrag geht auf Funktion und Wirksamkeit der einzelnen Systeme ein und gibt einen Ausblick in die nähere Zukunft.
Motorcycle safety research
(2007)
Honda- global motorcycle sales exceeded the 10 million units mark since 2004, and further expansion is expected. As a responsibility for a company to provide mobility, Honda is focusing on motorcycle safety as top priority and has been working on various activities for both aspects of hardware and software. Here, we present Honda- activity for the safety technology of motorcycles. At present, Honda is promoting motorcycle safety in the four themes of prevention and collision safety such as safety education, recognition assistance, accident prevention and injury reduction. First, in the area of the safety education, the "Honda Safety Driving Promotion Center" was established in 1970, and motorcycle riders and vehicle driver trainings have been organized, and the traffic training centers are used as an actual practice field not only in Japan but also in many other regions in the world. Through our training activities, the new area of safety training with hardware assistance was developed and Honda- unique technology was accumulated such as the riding simulator which can provide experience of potentially dangerous situations without risk. Especially, the "riding trainer", the popular version of the riding simulator, was introduced at several motor shows in various countries and launched in September 2005. It was distributed first in Europe and is expected to expand globally aiming at 3000 units worldwide.. And in Europe, the newest version, which includes the suburban roads program, jointly developed with ADAC, will be released in near future. In the area of recognition assistance, "vehicle to vehicle communication technology" is under development using the advantage of being a manufacturer of both motorcycles and cars. This technology is under research as Honda "ASV-3" in Japan, and as part of C2C activity in Europe. As for the accident prevention, advanced brake systems for motorcycles to assist more effective brake operation have been expanded, Honda signed the European Road Safety Charter in April 2004 with the advanced brake systems commitment and furthermore, they are expanding according to vehicle characteristics and region. Then all models above 250 cc will have a version of the system by 2010. And as the last theme, "motorcycle airbag system" is introduced which is equipped on a mass production motorcycle for the first time in the world. It has been researched and developed for a long time as an injury reduction technology for collision accidents. Honda automobile technology was used for the research and development of the motorcycle airbag, and many specific issues such as the analysis of the collision conditions particular to motorcycles have been solved to realize today- success. It might be known that ADAC in-house crash test held in August this year confirmed the high effectiveness of the airbag system and showed a positive result. This motorcycle airbag system is equipped to the Honda Gold Wing and launched in North America in August, 2006. Also in Europe, it will be sold by the end of this year. Each theme of Honda motorcycle safety technology can be seen at the Honda booth.
Der Allgemeine Deutsche Automobil-Club e.V. (ADAC) und die Bundesanstalt für Straßenwesen (BASt) veranstalteten am 13. Oktober 2006 in Baden-Baden das 6. Symposium "Sicher fahren in Europa". Die Fachvorträge befassten sich mit den Themenbereichen: Ansätze zu mehr Verkehrssicherheit, - Verbesserung der Fahrzeugsicherheit, - Besondere Zielgruppen. Die CD-ROM dokumentiert die Grußworte, die Referate und die Podiumsdiskussion.
The overall purpose of the ASSESS project is to develop a relevant and standardised set of test and assessment methods and associated tools for integrated vehicle safety systems, primarily focussing on currently available pre-crash sensing systems. The first stage of the project was to define casualty relevant accident scenarios so that the test scenarios will be developed based on accident scenarios which currently result in the greatest injury outcome, measured by a combination of casualty severity and casualty frequency. The first analysis stage was completed using data from a range of accident databases, including those which were nationally representative (STATS19, UK and STRADA, SE) and in-depth sources which provided more detailed parameters to characterise the accident scenarios (GIDAS, DE and OTS, UK). A common analysis method was developed in order to compare the data from these different sources, and while the data sets were not completely compatible, the majority of the data was aligned in such a way that allowed a useful comparison to be made. As the ASSESS project focuses on pre-crash sensing systems fitted to passenger cars, the data selected for the analysis was "injury accidents which involved at least one passenger car". The accident data analysis yielded the following ranked list of most relevant accident scenarios: Rank Accident scenario 1 Driving accident - single vehicle loss of control 2 Accidents in longitudinal traffic (same and opposite directions) 3 Accidents with turning vehicle(s) or crossing paths in junctions 4 Accidents involving pedestrians The ranked list highlights the relatively large role played by "accidents in longitudinal traffic", and "accidents with turning vehicle(s) or crossing paths in junctions" (the second and third most prevalent accident scenarios, respectively). The pre-crash systems addressed in ASSESS propose to yield beneficial safety outcomes with specific regard to these accident scenarios. This indicates that the ASSESS project is highly relevant to the current casualty crash problem. In the second stage of the analysis a selection of these accident scenarios were analysed further to define the accident parameters at a more detailed level .This paper describes the analysis approach and results from the first analysis stage.
This work aims at bringing evidence for mass incompatibility in frontal impact for cars built according to the UNECE R94 regulation. French national injury accidents database census for years 2005 to 2008 were used for the analysis. The heterogeneity of frontal self-protection among cars of different masses is investigated, as well as the partner protection parameter offered by these cars. The last part of the analysis deals with the estimation of the benefit, in terms of fatal and severe injuries avoided, if crashworthiness was harmonized for the whole fleet of vehicle. This calculation is done for France and is extended to all Europe.
Over the past two decades the popularity of consumer crash test programs, commonly referred to as New Car Assessment Programs (NCAP), has grown across the world. They are popular among government regulators as they afford a means of promoting safety innovations and levels of vehicle performance beyond those dictated by national standards. They also fulfill the demand for information regarding the safety ranking of vehicles among consumers contemplating the purchase of a new vehicle. There is no question that consumer crash test programs greatly influence vehicle design changes as well as accelerate the fitment of new safety features. The extent to which these changes can be expected to reduce serious and potentially fatal injuries will be influenced by how well the testing protocols and associated rating schemes correctly reflect the nature of the residual safety problem they seek to address. Drawing on data contained primarily in the US National Automotive Sampling System (NASS), the field relevance of current and proposed testing and rating protocols addressing frontal crash test protection is examined. Emphasis is placed on examining how accurately injury rates computed from the dummy responses measured in consumer crash tests correspond to actual injury rates observed in the field. Additional data from Canadian field investigations and US databases such as the National Motor Vehicle Crash Causation Survey (NMVCCS) are examined to see how well frontal airbag firing times, crush pulse durations and other determinants of injury are replicated in consumer testing protocols. This portion of the analysis draws on data obtained from Event Data Recorders (EDR) in both field collisions and staged tests of the same vehicle model. Vehicle rankings and overall frontal crash test ratings were found to be particularly sensitive to the choice of injury risk functions employed in the test. This was particularly true in the case of injury risk functions used to assess neck injury potential. Neck injury risk derived from Nij was found to show the least agreement with the field. Agreement between field chest injury rates and those derived from crash tests was improved considerably when chest injury risk functions for "older" occupants were employed. The paper concludes with a discussion of how different current testing protocols could be improved to enhance their field relevance.
In road traffic accidents, a car-seat and its occupant can be subjected to various crash pulses in the case of a rear impact. This study investigates the influence of crash pulse shape on seat-occupant response and evaluates the corresponding risk of whiplash injury. For this purpose, a rigorously validated seat-occupant system model is used to study different carseat designs and crash pulses. Two different car-seat concepts are also presented which can effectively mitigate whiplash injury for a wide range of crash severity. It is shown that for crash pulses of similar severity, the level of whiplash-risk depends strongly on the combined effects of seat design and crash pulse shape.
An analysis of NASS and FARS was conducted to determine crash conditions that involved injuries that are not currently being directly addressed by vehicle safety standards or by consumer information test protocols. Analysis of both field data and US NCAP tests were conducted to determine the relative safety provided by seating position and by vehicle model year. Opportunities for improvements were determined by crash categories with large populations of injuries that were not addressed by safety tests or smaller numbers that were increasing in frequency. Areas of opportunities include improved occupant restrain in rollovers, improved frontal protection for rear seat occupants and improved fire prevention in frontal and rollover crashes.
The share of high-tensile steel in car bodies has increased over the last years. While occupant safety has generally benefited from this measure, there is a potential risk that, as a result, rescue time may increase considerably. In more than 60% of all car occupant fatalities a technical rescue has been necessary. These are in particular those cases where occupants die immediately at the accident scene. Therefore, in these cases "rescue time" is a very sensitive parameter. In addition to the general analysis of the need of technical rescue and the actual rescue time depending on model years, the injury pattern of occupants requiring technical rescue will be analysed to provide advice for rescue teams. Furthermore, a detailed analysis of rescue measures for the most popular car models depending on the safety cell design is given.
The paper presents a methodology for the benefit estimation of several secondary safety systems for pedestrians, using the exceptional data depth of GIDAS. A total of 667 frontal pedestrian accidents up to 40kph and more than 500 AIS2+ injuries have been considered. In addition to the severity, affected body region, exact impact point on the vehicle, and the causing part of every injury, the related Euro NCAP test zone was determined. One results of the study is a detailed impact distribution for AIS2+ injuries across the vehicle front. It can be stated, how often a test zone or vehicle part is hit by pedestrians in frontal accidents and which role the ground impact plays. Basing on that, different secondary safety measures can be evaluated by an injury shift method concerning their real world effectiveness. As an example, measures concerning the Euro NCAP pedestrian rating tests have been evaluated. It was analysed which Euro NCAP test zones are the most effective ones. In addition, real test results have been evaluated. Using the presented methodology, other secondary safety like the active bonnet (pop-up bonnet) or a pedestrian airbag measures can be evaluated.
Qualität von on-trip Verkehrsinformationen im Straßenverkehr : BASt-Kolloquium 23. und 24.03.2011
(2011)
Am 23. und 24. März 2011 veranstaltete die Bundesanstalt fuer Straßenwesen ein, um die Ergebnisse der erwähnten Projekte und Initiativen präsentieren zu lassen und mit anderen Experten zu diskutieren. Der vorliegende Tagungsband fasst die Ergebnisse des Kolloquiums zur "Qualität von on-trip Verkehrsinformationen" zusammen. Die Bereitstellung von Verkehrsinformationen ist geprägt von vielen Akteuren. Die Wertschöpfungskette beginnt bei der Sammlung grundlegender Verkehrsdaten zur Erstellung von Verkehrsinformationen und setzt sich mit der Datenverarbeitung und -interpretation bis hin zur Meldungserstellung fort. Die Weitergabe kann über verschiedene Übertragungsmedien erfolgen und beim Nutzer (z.B. im Navigationsgerät) empfangen werden. Jeder einzelne Schritt der Wertschoepfungskette kann sowohl von unterschiedlichen Partnern (privat oder öffentlich) übernommen werden als auch in der Hand eines Partners liegen. Diese Komplexität der Zusammenarbeit spiegelt sich demzufolge auch in Qualitätsmanagementprozessen wider. Im Rahmen des Kolloquiums wurden zwei wesentliche Qualitätsaspekte näher betrachtet: - die Datenqualität mit dem Focus auf Aktualitaet, Stimmigkeit der Daten verglichen mit einer gemessenen Realitaet sowohl zu Beginn der Wertschöpfungskette als auch an jeglichen Schnittstellen, - die Prozessqualität, welche sich insbesondere mit der reibungslosen Datenübergabe an den Schnittstellen der Wertschoepfungskette beschäftigt. Beide Qualitätsaspekte helfen zu verstehen, worin die heutigen Qualitätsprobleme bestehen und welche Massnahmen im Einzelnen ergriffen werden müssten, um eine nachhaltige Verbesserung zu erreichen. Einerseits kann es vorkommen, dass die Information über ein Verkehrsereignis an einer oder mehreren Stellen der Wertschöpfungskette korrekt vorliegt, jedoch durch ungenuegende technische oder organisatorische Schnittstellen im Prozessablauf wieder verloren geht und dem Nutzer folglich nicht zur Verfügung steht. Prominentes Beispiel eines solchen Problems in der Prozessqualität ist die fehlerhafte Interpretation der Meldung im Navigationsgerät, denkbar sind solche Informationsverluste jedoch an jeder Stelle der Wertschoepfungskette. Eine wichtige Massnahme zur Verbesserung der Prozessqualität ist die Standardisierung sowie die Überprüfung, ob die definierten Standards an jeder Stelle der Wertschöpfungskette eingehalten werden. Andererseits kann es vorkommen, dass die Datenqualität in Bezug auf ihre Genauigkeit von Anfang an so schlecht ist, dass der Nutzer eine fehlerhafte oder gar keine Nachricht übermittelt bekommt. Beispiel hierfür ist die Vielzahl von Stauereignissen, die entweder nicht gesendet wurden oder gesendet wurden, obwohl sie nicht vorhanden waren. Eine wichtige Massnahme zur Verbesserung dieser Situation ist die Verbesserung der Ereignisdetektion. Der Tagungsband enthaelt Präsentationen, die den Status Quo analysieren, Methoden zur verbesserten Datenerfassung vorschlagen und Möglichkeiten zur Verbesserung von Daten- und Prozessqualität vorstellen. Offen geblieben sind darüber hinaus folgende Fragestellungen: - Wie kann die Prozessqualität der gesamten Wertschöpfungskette bei der Vielzahl der Partner kontrolliert werden? Wer überwacht die Wertschöpfungskette? Wird hierfuer überhaupt eine zentrale Stelle benötigt? Oder ist es ausreichend, wenn jeder Partner eine angemessene Eingangs bzw. Ausgangskontrolle durchführt? - Obwohl es nur eine Realität gibt, entsteht doch Wettbewerb über die (Qualität der) Information zu dieser Realität. Wie kann Konsistenz zwischen allen Anbietern von sicherheitsrelevanten Informationen erreicht werden? Wo sollte der Wettbewerb enden und wie kann dies technisch, organisatorisch und wirtschaftlich realisiert werden? - Welche Prozesse sollten geschaffen werden, um Partner zu integrieren, die sich nicht an geschaffene Qualitätsstandards halten (z.B. kommerzielle Diensteanbieter, die nicht mit der Verkehrsinformationsszene vernetzt sind)? - Und nicht zuletzt, wie kann die Wahrnehmung des Nutzers über verschiedene Qualitätslevel unterschiedlicher Produkte verbessert werden? Ist der Nutzer in der Lage, die unterschiedlichen Qualitätsstufen von Verkehrssystemen zu unterscheiden? Falls nicht, welche Art von Unterstuetzung braucht der Kunde? Ein "European Information Services Assessment Programme" vergleichbar zu Euro NCAP für Fahrzeuge? Die Ergebnisse des Kolloquiums sollen die laufende Diskussion um die Verbesserung der Qualität von Verkehrsinformationen unterstützen.
Providing effective occupant protection in rollover crashes requires supplying the occupant with a restraint system proven effective in the dynamic rollover accident mode. Preventing ejection and providing restraint sufficient to prevent potentially injurious contacts with both interior and exterior vehicle components is paramount for effective rollover occupant protection. Research has shown that the injury potential can be decreased by closely coupling the occupant to the seat. This paper focuses on the effect of restraint system slack and its relationship to occupant excursion and ejection potential during rollover. Various restraint system configurations are evaluated in rollover-type test environments. A review of prior research is presented prior to presenting new quasi-static vehicle inversion studies conducted with live surrogate occupants. Additionally, dynamic rollover testing utilizing anthropometric test devices (ATDs) is presented. The influence of belt looseness and effects of various restraint designs on the belted occupants' injury potential are discussed.
The need of passive safety devices, able to reduce the accidents and the severity of injuries suffered by motorcyclist, distinctly arises from data on accident statistics. In this paper, the effectiveness of an airbag device fitted in the biker- garments has been verified through various numerical simulations. Two simple test conditions were defined, in order to investigate the performance of the device both for back and front impacts, and simulated at various impact speeds. With the aim of providing more information about the actual capability of the airbag to reduce the severity of the injuries, one of accident scenario described by ISO 13232:2005 has been also investigated, checking the real effectiveness of the airbag strap-based firing system too. Confrontation of injury indexes resulting from simulation with and without airbag made possible a realistic evaluation of the harm reduction induced by the airbag presence.
In order to enable foreseeing or comparing the benefit of safety systems or driver assistance systems in Germany, in the United States and in Japan, the traffic accident databases in those three countries are examined. The variables used are culpable party, collision partner, accident type, and injury level and the method to re-classify the databases for comparison are proposed. The result indicates that single passenger car fatality is the most frequent in Germany and in the United States, while passenger car vs. pedestrian is the most frequent fatality scenario in Japan. When the casualty by fatality ratio is focused, the greatest difference is observed in rear-end collisions. The ratio of slight injuries in Japan yields about eighteen times as many as those in Germany, and about eight times as many as those in the United States.
Accident data shows that the vast majority of pedestrian accidents involve a passenger car. A refined method for estimating the potential effectiveness of a technology designed to support the car driver in mitigating or avoiding pedestrian accidents is presented. The basis of the benefit prediction method consists of accident scenario information for pedestrian-passenger car accidents from GIDAS, including vehicle and pedestrian velocities. These real world pedestrian accidents were first reconstructed and the system effectiveness was determined by comparing injury outcome with and without the functionality enabled for each accident. The predictions from Volvo Cars" general Benefit Estimation Model are refined by including the actual system algorithm and sensing models for a relevant car in the simulation environment. The feasibility of the method is proven by a case study on a authentic technology; the Auto Brake functionality in Collision Warning with Full Auto Brake and Pedestrian Detection (CWAB-PD). Assuming the system is adopted by all vehicles, the Case Study indicates a 24% reduction in pedestrian fatalities for crashes where the pedestrians were struck by the front of a passenger car.