91 Fahrzeugkonstruktion
Filtern
Erscheinungsjahr
Dokumenttyp
- Buch (Monographie) (87)
- Konferenzveröffentlichung (87)
- Arbeitspapier (6)
- Bericht (5)
- Wissenschaftlicher Artikel (1)
Volltext vorhanden
- ja (186) (entfernen)
Schlagworte
- Deutschland (119)
- Germany (119)
- Research report (76)
- Conference (73)
- Forschungsbericht (73)
- Konferenz (72)
- Safety (67)
- Sicherheit (65)
- Fahrzeug (51)
- Vehicle (49)
- Test (42)
- Versuch (42)
- Unfall (41)
- Accident (39)
- Passives Sicherheitssystem (33)
- Bewertung (31)
- Injury (30)
- Car (29)
- Fahrerassistenzsystem (29)
- Simulation (29)
- Verletzung (29)
- Active safety system (27)
- Passive safety system (27)
- Aktives Sicherheitssystem (26)
- Unfallverhütung (25)
- Driver assistance system (24)
- Pkw (24)
- Unfallrekonstruktion (24)
- Accident prevention (23)
- Efficiency (21)
- Evaluation (assessment) (21)
- Leistungsfähigkeit (allg) (20)
- Pedestrian (20)
- Prevention (20)
- Prüfverfahren (20)
- Anfahrversuch (19)
- Fußgänger (19)
- Driver (18)
- Schweregrad (Unfall (18)
- Verletzung) (18)
- Fahrer (17)
- Schweregrad (Unfall, Verletzung) (17)
- Severity (accid, injury) (17)
- Test method (17)
- injury) (17)
- Insasse (16)
- Reconstruction (accid) (16)
- Statistik (16)
- Analyse (math) (15)
- Collision (15)
- Measurement (15)
- Messung (15)
- Severity (accid (15)
- Analysis (math) (14)
- Development (14)
- Entwicklung (14)
- Fahrzeugführung (14)
- Impact test (veh) (14)
- Lorry (14)
- Statistics (14)
- Vehicle occupant (14)
- Zusammenstoß (14)
- Driving (veh) (13)
- Lkw (13)
- Motorrad (13)
- Verminderung (13)
- Datenbank (12)
- Frontalzusammenstoß (12)
- Method (12)
- Motorcycle (12)
- Verfahren (12)
- Data bank (11)
- Decrease (11)
- Emission (11)
- Fahrstabilität (11)
- Geschwindigkeit (11)
- Head on collision (11)
- Speed (11)
- Vehicle handling (11)
- Verhalten (11)
- Verhütung (11)
- Antikollisionssystem (10)
- Behaviour (10)
- Bremsung (10)
- On the spot accident investigation (10)
- Auffahrunfall (9)
- Ausrüstung (9)
- Braking (9)
- Equipment (9)
- Fehler (9)
- Improvement (9)
- Prognose (9)
- Reifen (9)
- Tyre (9)
- Verbesserung (9)
- Wirtschaftlichkeitsrechnung (9)
- Accident reconstruction (8)
- Articulated vehicle (8)
- Collision avoidance system (8)
- Cost benefit analysis (8)
- Error (8)
- Gelenkfahrzeug (8)
- Interior (veh) (8)
- Rear end collision (8)
- Risk (8)
- Untersuchung am Unfallort (8)
- Wahrnehmung (8)
- Airbag (7)
- Belastung (7)
- Cause (7)
- Electric vehicle (7)
- Elektrofahrzeug (7)
- Elektronisches Stabilitätsprogramm (7)
- Ergonomics (7)
- Evaluation (7)
- Fahrzeuginnenraum (7)
- Forecast (7)
- Kind (7)
- Load (7)
- Lärm (7)
- Noise (7)
- PKW (7)
- Perception (7)
- Risiko (7)
- Sensor (7)
- Ursache (7)
- Verkehrsinfrastruktur (7)
- Activity report (6)
- Automatisch (6)
- Berechnung (6)
- Bus (6)
- Cervical vertebrae (6)
- Child (6)
- Cyclist (6)
- Datenerfassung (6)
- Delivery vehicle (6)
- Electronic stability program (6)
- Fahrzeugsitz (6)
- Fatality (6)
- Gesetzgebung (6)
- Halswirbel (6)
- International (6)
- Interview (6)
- Legislation (6)
- Market (6)
- Markt (6)
- Mathematical model (6)
- Organisation (6)
- Radfahrer (6)
- Rechenmodell (6)
- Risikobewertung (6)
- Risk assessment (6)
- Seitlicher Zusammenstoß (6)
- Sicherheitsgurt (6)
- Straßenverkehr (6)
- Telematik (6)
- Traffic (6)
- Transport infrastructure (6)
- Tätigkeitsbericht (6)
- Tödlicher Unfall (6)
- Verkehr (6)
- Weight (6)
- Überschlagen (6)
- Accident rate (5)
- Automatic (5)
- Body (car) (5)
- Bremse (5)
- Calculation (5)
- Coach (5)
- Damage (5)
- Data acquisition (5)
- Deformation (5)
- Emergency (5)
- Ergonomie (5)
- Europa (5)
- Europe (5)
- Forschungsarbeit (5)
- Fuel consumption (5)
- Head (5)
- Hybrid vehicle (5)
- Hybridfahrzeug (5)
- Karosserie (5)
- Kontrolle (5)
- Kopf (5)
- Kraftstoffverbrauch (5)
- Lenken (Fahrzeug) (5)
- Notfall (5)
- Pollutant (5)
- Prüfstand (5)
- Reisebus (5)
- Richtlinien (5)
- Road construction (5)
- Road traffic (5)
- Sachschaden (5)
- Safety belt (5)
- Seat (veh) (5)
- Sichtbarkeit (5)
- Side impact (5)
- Specifications (5)
- Steering (process) (5)
- Straßenbau (5)
- Surfacing (5)
- Surveillance (5)
- Technologie (5)
- Technology (5)
- Test rig (5)
- Unfallhäufigkeit (5)
- Verformung (5)
- Sichtbarkeit (5)
- Adaptive cruise control (4)
- Air bag (restraint system) (4)
- Antrieb (tech) (4)
- Attitude (psychol) (4)
- Brake (4)
- Brennstoffzelle (4)
- Contact (tyre road) (4)
- Decke (Straße) (4)
- Detection (4)
- Digital model (4)
- Driver information (4)
- Dynamics (4)
- Dynamik (4)
- Eigenschaft (4)
- Einstellung (psychol) (4)
- Elektronische Fahrhilfe (4)
- Fahrzeugbeleuchtung (4)
- Fahrzeugteil (Sicherheit) (4)
- Fahrzeugteile (4)
- Fire (4)
- Fuel cell (4)
- Gewicht (4)
- Headlamp (4)
- Highway (4)
- Japan (4)
- Lieferfahrzeug (4)
- Maintenance (4)
- Modell (4)
- Modification (4)
- Motorcyclist (4)
- Motorradfahrer (4)
- Nachfrage (4)
- Numerisches Modell (4)
- Overturning (veh) (4)
- Properties (4)
- Propulsion (4)
- Road user (4)
- Scheinwerfer (4)
- Steifigkeit (4)
- Stiffness (4)
- Straße (4)
- Sustainability (4)
- Telematics (4)
- Tunnel (4)
- Unterhaltung (4)
- Vehicle lighting (4)
- Vehicle regulations (4)
- Verkehrsteilnehmer (4)
- Windschutzscheibe (4)
- Abstandsregeltempomat (3)
- Advanced driver assistance system (3)
- Age (3)
- Alter (3)
- Anthropometric dummy (3)
- Anti locking device (3)
- Attention (3)
- Aufmerksamkeit (3)
- Aufprallschlitten (3)
- Autobahn (3)
- Baustoff (3)
- Bemessung (3)
- Benutzung (3)
- Bridge (3)
- Brustkorb (3)
- Brücke (3)
- Camera (3)
- Comfort (3)
- Construction (3)
- Demand (3)
- Electronic driving aid (3)
- Entdeckung (3)
- Fahrsimulator (3)
- Haftung (jur) (3)
- Head restraint (3)
- Hydrocarbon (3)
- Impact sled (3)
- Impact test (3)
- Increase (3)
- Information (3)
- Intelligent transport system (3)
- Intelligentes Transportsystem (3)
- Kamera (3)
- Kleintransporter (3)
- Knotenpunkt (3)
- Kohlenwasserstoff (3)
- Komfort (3)
- Kompatibilität (3)
- Kopfstütze (3)
- Kunststoff (3)
- Layout (3)
- Liability (3)
- Material (constr) (3)
- Motor (3)
- Motorway (3)
- Nachhaltige Entwicklung (3)
- Oberfläche (3)
- Psychological aspects (3)
- Psychologische Gesichtspunkte (3)
- Rückspiegel (3)
- Schadstoff (3)
- Schallpegel (3)
- Schutz (3)
- Simulator (driving) (3)
- Sound level (3)
- Spinal column (3)
- Standardisierung (3)
- Standardization (3)
- Surface (3)
- Technische Vorschriften (Kraftfahrzeug) (3)
- Thorax (3)
- USA (3)
- Use (3)
- Vehicle safety device (3)
- Vergrößerung (3)
- Versuchspuppe (3)
- Veränderung (3)
- Warning (3)
- Warnung (3)
- Wirbelsäule (3)
- Abbiegen (2)
- Abblendlicht (2)
- Accessibility (2)
- Achslast (2)
- Alternative energy (2)
- Antiblockiereinrichtung (2)
- Arbeitsgruppe (2)
- Automatische Notbremsung (2)
- Autonomous emergency braking (2)
- Axle load (2)
- Ballungsgebiet (2)
- Bau (2)
- Baumusterzulassung (2)
- Behinderter (2)
- Beinahe Unfall (2)
- Bildschirm (2)
- Biomechanics (2)
- Biomechanik (2)
- Blendung (2)
- Blickfeld (2)
- Brake light (2)
- Brand (2)
- Bremslicht (2)
- Bremsweg (2)
- Bruch (mech) (2)
- Carbon dioxide (2)
- Carriageway (2)
- Classification (2)
- Communication (2)
- Components of the car (2)
- Components of the vehicle (2)
- Conurbation (2)
- Correlation (math, stat) (2)
- Cost (2)
- Crashtest (2)
- Daylight (2)
- Daytime running light (2)
- Design (overall design) (2)
- Detektion (2)
- Dipped headlight (2)
- Disabled person (2)
- Dissertation (2)
- Driver training (2)
- Driving (2)
- EU (2)
- EU directive (2)
- EU-Richtlinie (2)
- Economic efficiency (2)
- Effectiveness (2)
- Einfahrt (2)
- Energieeinsparung (2)
- Energy conservation (2)
- Erste Hilfe (2)
- Estimation (2)
- Evaluation (Assessment) (2)
- Fahrassistenzsystem (2)
- Fahrbahn (2)
- Fahrdatenschreiber (2)
- Fahrerinformation (2)
- Failure (2)
- Feinstaub (2)
- Feuer (2)
- Field of vision (2)
- First aid (2)
- Fracht (2)
- France (2)
- Frankreich (2)
- Freight (2)
- Freight transport (2)
- Front (2)
- Fuel (2)
- Gas (2)
- Gestaltung (2)
- Glare (2)
- Goods traffic (2)
- Gravity (2)
- Gütertransport (2)
- Güterverkehr (2)
- Human body (2)
- Human machine interface (2)
- Impact study (2)
- Incident detection (2)
- Information documentation (2)
- Installation (2)
- Inter urban (2)
- Intercity (2)
- Junction (2)
- Klassifizierung (2)
- Knee (human) (2)
- Knie (menschl) (2)
- Kohlendioxid (2)
- Kohlenmonoxid (2)
- Kommunikation (2)
- Kontakt Reifen Straße (2)
- Kontakt Reifen-Straße (2)
- Korrelation (math, stat) (2)
- Kosten (2)
- Kraftstoff (2)
- Kreuzung (2)
- LKW (2)
- Lang-Lkw (2)
- LeistungsfÃ-¤higkeit (allg) (2)
- Leuchtdichte (2)
- Light intensity (2)
- Location (2)
- Longer and heavier vehicle (2)
- Luminance (2)
- Masse (2)
- Mensch Maschine Schnittstelle (2)
- Mensch Maschine Verhältnis (2)
- Merging traffic (2)
- Model (not math) (2)
- Montage (2)
- Nasse Straße (2)
- Near miss (2)
- Nitrogen oxide (2)
- Oberbau (2)
- Occupant (veh) (2)
- Official approval (2)
- Optimum (2)
- Organization (2)
- Organization (Association) (2)
- Ort (Position) (2)
- Particulate matter (2)
- Passenger (2)
- Passenger transport (2)
- Passive restraint system (2)
- Pavement (2)
- Personenbeförderung (2)
- Plastic material (2)
- Policy (2)
- Politik (2)
- Polymer (2)
- Post crash (2)
- Probability (2)
- Quality (2)
- Radio (2)
- Reaction (human) (2)
- Reaktionsverhalten (2)
- Rear view mirror (2)
- Rechts (2)
- Regression analysis (2)
- Regressionsanalyse (2)
- Reifenprofil (2)
- Report (2)
- Research project (2)
- Restraint system (2)
- Rolling resistance (2)
- Rollwiderstand (2)
- Rundfunk (2)
- Safety glass (2)
- Sample (mater) (2)
- Schall (2)
- Schlag (2)
- Schweden (2)
- Schwerkraft (2)
- Seite (2)
- Shock (2)
- Sicherheitsglas (2)
- Side (2)
- Sound (2)
- Spain (2)
- Spanien (2)
- Stability (Mechanics) (2)
- Stickoxid (2)
- Straßenverkehrsrecht (2)
- Stress (2)
- Stress (psychol) (2)
- Tagesfahrlicht (2)
- Tageslicht (2)
- Telefon (2)
- Telephone (2)
- Test procedures (2)
- Thesis (2)
- Time (2)
- Toxicity (2)
- Toxizität (2)
- Traction control (2)
- Traffic engineering (2)
- Traffic regulations (2)
- Transmission (veh) (2)
- Tyre tread (2)
- Umweltfreundlichkeit (2)
- United Kingdom (2)
- Untersuchung am unfallort (2)
- Vehicles (2)
- Vereinigtes Königreich (2)
- Verkehrssteuerung (2)
- Verkehrstechnik (2)
- Verkehrsverflechtung (2)
- Visual display (2)
- Vorn (2)
- Wahrscheinlichkeit (2)
- Wear (2)
- Wet road (2)
- Windscreen (veh) (2)
- Wirksamkeitsuntersuchung (2)
- Wirtschaftlichkeit (2)
- Working group (2)
- Zeit (2)
- Abdomen (1)
- Abgasnachbehandlung (1)
- Ablenkung (psychol) (1)
- Abnutzung (1)
- Abrieb (1)
- Absorption (1)
- Accuracy (1)
- Active safety system; Automatic; Brake; Car; Collision avoidance system; Conference; Driver assistance system; Germany; Impact test (veh); Rear end collision; Severity (accid (1)
- Adaptation (psychol) (1)
- Adaptive forward lighting (1)
- Administration (1)
- Adult (1)
- Advanced vehicle control system (1)
- Advanced vehicle control systems (1)
- Aerodynamics (1)
- Aerodynamik (1)
- Airbag (restraint system) (1)
- Aktive Sicherheit (1)
- Alte Leute (1)
- Alternative Energie (1)
- Angles (1)
- Angularity (1)
- Anordnung (1)
- Anpassung (allg) (1)
- Anpassung (psychol) (1)
- Anthropometric body (1)
- Antiblockiereinrichtung; Bewertung (1)
- Apparatus (measuring) (1)
- Aptitude (1)
- Aquaplaning (1)
- Armaturenbrett (1)
- Atives Sicherheitssystem (1)
- Aufzeichung (1)
- Auspuff (1)
- Austria (1)
- Automobile (1)
- Automobiles (1)
- Autonomes Fahren (1)
- Autonomes Fahrzeug (1)
- Autonomous driving (1)
- Autonomous vehicle (1)
- Außenseite (1)
- Barrierefrei (1)
- Bearing capacity (1)
- Befreiung (Bergung) (1)
- Begrenzungsleuchten (1)
- Behavior (1)
- Bewehrung (1)
- Bicycle (1)
- Biomasse (1)
- Bituminous mixture (1)
- Bituminöses Mischgut (1)
- Blei (1)
- Blind spot (veh) (1)
- Boden (1)
- Bodenhaftung (1)
- Braking distance (1)
- Breaking (1)
- Breite (1)
- Bridge deck (1)
- Budget (1)
- Bumper (1)
- Cadmium (1)
- Carbon monoxide (1)
- Caron monoxide (1)
- Catalysis (1)
- Chemical analysis (1)
- Chemische Analyse (1)
- Children (1)
- Clothing (1)
- Collision test (veh) (1)
- Colour (1)
- Combustion (1)
- Compatibility (1)
- Components of the Car (1)
- Computation (1)
- Concentration (chem) (1)
- Contact (Tyre road) (1)
- Contact (tyre (1)
- Control (1)
- Corrosion (1)
- Cost Benefit analysis (1)
- Crash test (1)
- Cross road (1)
- Cross roads (1)
- Customer (1)
- Damping (1)
- Dashboard (1)
- Data collection (1)
- Data exchange (1)
- Data processing (1)
- Data protection (1)
- Data security (1)
- Data transmission (1)
- Data transmission (Telecom) (1)
- Database (1)
- Datenaustausch (1)
- Datenschutz (1)
- Datensicherheit (1)
- Datenverarbeitung (1)
- Datenübertragung (Telekom) (1)
- Datenübertragung (telekom) (1)
- Dauer (1)
- Dauerhaftigkeit (1)
- Deceleration (1)
- Decke (straße) (1)
- Deckschicht (1)
- Deformable barrier (impact test) (1)
- Deformierbare Barriere (Anpralltest) (1)
- Demand (econ) (1)
- Design (Overall design) (1)
- Diffusion (1)
- Digital computer (1)
- Digitalrechner (1)
- Dispersion (stat) (1)
- Displacement (1)
- Distraction (1)
- Distribution (gen) (1)
- Driving (veh) ; Evaluation (1)
- Driving aid (electronic) (1)
- Druck (1)
- Dränasphalt (1)
- Dta (1)
- Dtetection (1)
- Dummy (1)
- Durability (1)
- Dust (1)
- Dynamic penetration test (1)
- Dämpfung (1)
- Echtzeit (1)
- Education (1)
- Effizienz (1)
- Eins (1)
- Ejection (1)
- Electric bicycle (1)
- Electrode (1)
- Electronics (1)
- Elekronic stability program (1)
- Elektrode (1)
- Elektrofahrrad (1)
- Elektronik (1)
- Elektronisches Stabilitätsprogram (1)
- Emergency exit (1)
- Emission control (1)
- Emissionskontrolle (1)
- Entrance (1)
- Environment (1)
- Environmental compatibility (1)
- Environmental protection (1)
- Erfahrung (menschl) (1)
- Ermüdung (mater) (1)
- Erwachsener (1)
- Erziehung (1)
- Eu (1)
- European Union (1)
- Event data recorder (Road vehicle) (1)
- Event data recorder (road vehicle) (1)
- Exhaust aftertreatment (1)
- Exhaust pipe (1)
- Experience (human) (1)
- Extrication (1)
- Fahranfänger (1)
- Fahrausbildung (1)
- Fahrbahntafel (1)
- Fahrbare Barriere (1)
- Fahrer ; Fahrerassistenzsystem (1)
- Fahrerinformationen (1)
- Fahrerweiterbildung (1)
- Fahrleistung (1)
- Fahrrad (1)
- Fahrtüchtigkeit (1)
- Fahrzeugdach (1)
- Fahrzeugflotte (1)
- Fahrzeugfuehrung (1)
- Fahrzeugmarkierung (1)
- Fahrzeugrückhaltesystem (1)
- Farbe (1)
- Fatigue (human) (1)
- Fatigue (mater) (1)
- Fernverkehrsstraße (1)
- Festigkeit (1)
- Feuerlöscher (1)
- Fire extinguisher (1)
- Fleet of vehicles (1)
- Flow (fluid) (1)
- Form (1)
- Frau (1)
- Frequency (1)
- Frequenz (1)
- Fuge (1)
- Fussgänger (1)
- Future transport mode (1)
- Gebraucht (1)
- Gefahr (1)
- Gelände (1)
- Gemisch (1)
- Geometry (shape) (1)
- Geschwindigkeitsbeschränkung (1)
- Gesetzesdurchführung (1)
- Gierverhalten (1)
- Government (national) (1)
- Grenzwert (1)
- Griffigkeit (1)
- Harmonisation (1)
- Harmonisierung (1)
- Heavy metal (1)
- Hell (1)
- Herausschleudern (1)
- Highway traffic (1)
- Hinten (1)
- Hohlraumgehalt (1)
- Homogeneity (1)
- Homogenität (1)
- Horizontal (1)
- Human factor (1)
- Industrie (1)
- Industry (1)
- Inertia reel safety belt (1)
- Information management (1)
- Infrastructure (1)
- Injury) (1)
- Insurance (1)
- Interactive model (1)
- Interaktives Modell (1)
- Intersection (1)
- Itinerary (1)
- Joint (structural) (1)
- Journey to school (1)
- Karte (1)
- Katalyse (1)
- Kleidung (1)
- Konstruktion (1)
- Kontakt-Reifen-Straße (1)
- Konzentration (chem) (1)
- Korrosion (1)
- Kosten Nutzen Vergleich (1)
- Kraftfahrzeug (1)
- KraftÃüï-¿-½ÃƒüÂ-¼bertragung (Fahrzeug) (1)
- Kraftübertragung (Fahrzeug) (1)
- Kunde (1)
- Kurvenlicht (Scheinwerfer) (1)
- Ladungssicherung (1)
- Landstrasse (1)
- Landstraße (1)
- Langfristig (1)
- Lap strap (1)
- Lateral collision (1)
- Law enforcement (1)
- Lead (Metal) (1)
- Lebenszyklus (1)
- Leicht (1)
- Leistungsfähigkeit (Allg.) (1)
- Length (1)
- Lenkrad (1)
- Leuchtdiode (1)
- LichtstÃ-¤rke (1)
- Lichtstärke (1)
- Life cycle (1)
- Light (colour) (1)
- Light commercial vehicle (1)
- Light emitting diode (1)
- Lightweight (1)
- Limit (1)
- Load fastening (1)
- Long term (1)
- Länge (1)
- Main road (1)
- Map (1)
- Massenunfall (1)
- Matrix (1)
- Measuring (1)
- Menschlicher Faktor (1)
- Menschlicher Körper (1)
- Menschlicher körper (1)
- Messages (1)
- Messgerät (1)
- Mix design (1)
- Mixture (1)
- Mobile barrier (1)
- Model (not Math) (1)
- Modell (non math) (1)
- Moped (1)
- Multiple collision (1)
- Müdigkeit (1)
- Nachricht (1)
- Nacht (1)
- Nigeria (1)
- Night (1)
- Norm (tech) (1)
- Notausgang (1)
- Nummer (1)
- Nutzwertanalyse (1)
- Old people (1)
- On the right (1)
- On the scene accident investigation (1)
- One (1)
- Output (1)
- Outside (1)
- Overturning (1)
- Passive Sicherheit (1)
- Perception . Rear view mirror (1)
- Personality (1)
- Personenschaden (1)
- Persönlichkeit (1)
- Pkw; Verhütung (1)
- Plastic (1)
- Police (1)
- Polizei (1)
- Porosity (1)
- Porous asphalt (1)
- Portugal (1)
- Pressure (1)
- Probe (1)
- Prototyp (1)
- Prototype (1)
- PrÃüÂ-¼fverfahren (1)
- Prüfkörper (1)
- Quality assurance (1)
- QualitÃ-¤t (1)
- Qualität (1)
- Qualitätssicherung (1)
- Radar (1)
- Radblockierung (1)
- Rammsondierung (1)
- Real time (1)
- Rear (1)
- Recently qualified driver (1)
- Recording (1)
- Reduction (decrease) (1)
- Regierung (staat) (1)
- Reinforcement (in mater) (1)
- Reiseweg (1)
- Road (1)
- Road network (1)
- Roadside (1)
- Roll over (veh) (1)
- Roof (veh) (1)
- Rotation (1)
- Route guidance (1)
- Rutschen (1)
- Ruß (1)
- Safety fence (1)
- Safety harness (1)
- Safety system (1)
- Schleudertrauma (1)
- Schulweg (1)
- Schutzeinrichtung (1)
- Schwermetall (1)
- Seat (1)
- Seat belt (1)
- Seat harness (1)
- Second hand (1)
- Service station (1)
- Severity (accid, injuy) (1)
- Severity (acid (1)
- Sichtweite (1)
- Side Light (1)
- Skid resistance (1)
- Skidding (1)
- Soil (1)
- Soot (1)
- Specification (standard) (1)
- Speed limit (1)
- Spikesreifen (1)
- Spreading (1)
- Stadt (1)
- Stahl (1)
- Standardabweichung (1)
- Statistic (1)
- Staub (1)
- Steel (1)
- Steering wheel (1)
- Steuerung (1)
- Stochastic process (1)
- Stochastischer Prozess (1)
- Stopping distance (1)
- Stossdämpfer (1)
- Stoßstange (1)
- Straßennetz (1)
- Straßenseitenfläche (1)
- Strength (mater) (1)
- Structure (physicochem) (1)
- Struktur (physikochem) (1)
- Strömung (1)
- Studded tyre (1)
- Störfall (1)
- Störfallentdeckung (1)
- Suspension (veh) (1)
- Sweden (1)
- Tankstelle (1)
- Technische Vorschriften (1)
- Technische Überwachung (Fahrzeug) (1)
- Telematic (1)
- Telematics; Traffic control (1)
- Tension (1)
- Terrain (1)
- Test Method (1)
- Thermal analysis (1)
- Toter Winkel (1)
- Traffic assignment (1)
- Traffic control (1)
- Traffic flow (1)
- Tragfähigkeit (1)
- Truck (1)
- Tunnels (1)
- Turn (1)
- Turning (1)
- Umwelt (1)
- Umweltschutz (1)
- Underride prevention (1)
- Unfallfolgemaßnahme (1)
- Unfallfolgephase (1)
- Unfallverhuetung (1)
- Unfallverhütug (1)
- United Nations (1)
- United kingdom (1)
- Unterfahrschutz (1)
- Unterleib (1)
- Untersuchung am Umfallort (1)
- Urban area (1)
- Usa (1)
- Value analysis (1)
- Vehicle inspection (1)
- Vehicle marking (conspicuity) (1)
- Vehicle mile (1)
- Vehicle restraint system (1)
- Vehicle safety (1)
- Verbrennung (1)
- Vereinigtes Königreichl (1)
- Vereinte Nationen (1)
- Verkehrsfluss (1)
- Verkehrsumlegung (1)
- Vermeidung (1)
- Verschiebung (1)
- Versicherung (1)
- Verteilung (allg) (1)
- Verteilung (mater) (1)
- Vertical (1)
- Vertikal (1)
- Verwaltung (1)
- Verzögerung (1)
- Visibility distance (1)
- Wasser (1)
- Water (1)
- Wearing course (1)
- Weather (1)
- Wheel locking (1)
- Whiplash injury (1)
- Width (1)
- Window (veh) (1)
- Windshield (1)
- Winkel (1)
- Witterung (1)
- Women (1)
- Yawing (veh) (1)
- Zahl (1)
- Zielführungssystem (1)
- Zinc (1)
- Zink (1)
- Zug (mech) (1)
- Zugänglichkeit (1)
- Zukünftiges Verkehrsmittel (1)
- Zusammensetzung (1)
- ZusammenstoÃüï-¿-½Ãƒ-¯Ã‚-¿Ã‚-½ (1)
- efficiency (1)
- head (1)
- material (constr) (1)
- road) (1)
- Österreich (1)
The BASt-project group "Legal consequences of an increase in vehicle automation" has identified, defined and consequently compiled different automation degrees beyond Driver Assistance Systems. These are partial-, high- and full automation. According to German regulatory law, i.e. the German Road Traffic Code, it has been identified that the distinctive feature of different degrees of automation is the permanent attention of the driver to the task of driving as well as the constant availability of control over the vehicle. Partial automation meets these requirements. The absence of the driver- concentration to the traffic situation and to execute control is in conflict with the use of higher degrees of vehicle automation (i.e. high and full automation). Their use is therefore presently not compatible with German law, as the human driver would violate his obligations stipulated in the Road Traffic Code when fully relying on the degree of automation these systems would offer. As far as higher degrees of automation imply free-hand driving, further research in terms of behavioural psychology is required to determine whether this hinders the driver in the execution of permanent caution as required by sec. 1 para. 1 StVO (German Road Traffic Code). As far as liabilities according to the StVG (German Road Traffic Act) are concerned, the presently reversed burden of proof on the driver within sec. 18 para. 1 S. 2 StVG might no longer be considered adequate in case of higher degrees of automation that allow the driver to draw attention from the task of driving (in case making such use of a system would be permitted by the German Road Traffic Code). The liability of the vehicle "keeper", according to the German Road Traffic Act, would remain applicable to all defined degrees of automation. In case of partial automation, the use of systems according to their limits is accentuated. The range of use that remains within the intended must be defined closely and unmistakeably. Affecting user expectations properly can immensely help to maintain safe use, in case design-measures that exclude overreliance are not available according to the current state of the art (otherwise such measures would have to be applied primarily). In case of the higher degrees of automation that no longer require the driver- permanent attention (under the presupposition their use would be permitted by the German Road Traffic Code), every accident potentially bears the risk to cause product liability on the side of the manufacturer. Liability of the manufacturer might only be excluded in case of a breach of traffic rules by a third party or in case of overriding/ oversteering by the driver. In so far aspects of German procedural law and the burden of proof are of great importance. The project group has identified the need for further continuative research not only to advance legal assessment but also to improve basic technical conditions for vehicle automation as well as product reliability.
Im Rahmen dieser Begleitstudie zum Feldversuch mit Lang-Lkw wurde untersucht, wie die technischen Anforderungen der Verordnung über Ausnahmen von straßenverkehrsrechtlichen Vorschriften für Fahrzeuge und Fahrzeugkombinationen mit Überlänge (LKWÜberlStVAusnV) von teilnehmenden Speditionen umgesetzt wurden. Die Studie fußt auf den der BASt von den am Feldversuch teilnehmenden Speditionen zur Verfügung gestellten Daten sowie Fahrzeugbegutachtungen. Sie bildet den Stand vom 15.07.2013 mit 43 Lang-Lkw von 23 Speditionen ab. 31 Lang-Lkw vom Typ 3 bilden hierbei den größten Anteil. Alternative Umsetzungsmöglichkeiten technischer Anforderungen wurden speziell bei Achslastüberwachungssystemen und Kamera-Monitor-Systemen am Heck betrachtet. Die Achslastüberwachungssysteme weisen keine Spezifikationen hinsichtlich ihrer Genauigkeit auf. Probemessungen zeigten jedoch eine hinreichende Genauigkeit, um etwaige Überladungszustände transparent zu machen. Mit den Kamera-Monitor-Systemen können Objekte hinter dem Fahrzeug erkannt werden, eignen sich jedoch je nach Kameraposition eher zur Beobachtung des rückwaertigen Verkehrs oder als Rückfahrhilfe. Durch Simulationen und Fahrversuche wurde das Kurvenlaufverhalten der Fahrzeuge entsprechend -§ 32d der StVZO ("BO-Kraftkreis") überprüft. Es zeigte sich hierbei, dass die Prüfvorschriften nicht hinreichend genau definiert sind und sich speziell für Lang-Lkw je nach Auslegung unterschiedliche Werte ergeben können. Die Studie zeigt weiter, dass Lang-Lkw gegenüber Lkw herkömmlicher Bauart bei einem Gesamtgewicht von 40 t einen kürzeren Bremsweg aufweisen und keine erhöhte Sogwirkung auf Zweiräder ausüben. Darüber hinaus werden Unterschiede in der Fahrdynamik durch Simulationen aufgeschlüsselt, wodurch auf weiteren Forschungsbedarf hingewiesen wird. In Fragebögen wurde die Wirksamkeit der hinteren Beschilderung der Lang-Lkw untersucht. Die Befragung zeigte eine höhere Wirksamkeit von Piktogrammen, welche gegenüber Aufschriften zu bevorzugen sind. Die Auswertung von Flottentelematikdaten ergab eine CO2-Reduktion eines Lang-Lkw von rund 15 % gegenüber Lkw herkömmlicher Bauart, wenn beide Fahrzeuge die gleiche Güterart transportieren.
Jahresbericht 2011/2012
(2013)
Der Verkehr auf deutschen Straßen nimmt immer weiter zu. Einem auch in Zukunft gut funktionierenden, sicheren und ökonomisch wie ökologisch verträglichen System Straße widmet sich die Forschung der Bundesanstalt für Straßenwesen (BASt). Alle zwei Jahre berichtet die BASt über ihre Aufgaben, Forschungsprojekte und ausgewählte Themen der Verwaltung. Der aktuelle Bericht umfasst die Jahre 2011 und 2012. Auf 151 Seiten gibt er einen kleinen Einblick in die aktuelle Forschung zu wichtigen Themen des Straßenwesens. In den Projekten SKRIBT und SKRIBTPlus wurde das Verhalten von Autofahrerinnen und Autofahrern in Gefahrensituationen im Tunnel untersucht. Es stellte sich heraus, dass in solchen Situationen oft falsch und zu spät reagiert wird. Durch die gesammelten Daten konnten neue Konzepte entwickelt werden, die das Verhalten bei Gefahren in Tunneln verbessern. In Kraftfahrzeugen kamen zwar in den letzten Jahren neue Sicherheitssysteme zum Einsatz, die in Gefahrensituationen das Bremsverhalten verbessern. Bisher ist es jedoch für den Endverbraucher schwer, unterschiedliche Systeme zu vergleichen, da keine geeigneten Bewertungen herangezogen werden können. Im EU-Projekt ASSESS (Assessment of Integrated Vehicle Safety Systems for improved vehicle safety), an dem die BASt maßgeblich beteiligt ist, wurde deshalb an einem einheitlichen Verfahren zur Bewertung und an juristischen Fragenstellungen gearbeitet. Viele europäische Länder sind sich einig: Alkohol, Drogen und Medikamente im Straßenverkehr gefährden die Sicherheit auf Europas Straßen. Um sich ein genaueres Bild machen zu können und geeignete Gegenmaßnahmen zu entwickeln, bewilligte die Europäische Kommission das bisher größte Forschungsprojekt zur Verbesserung der Verkehrssicherheit: DRUID (Driving Under the Influence of Drugs, Alcohol and Medicines). An dem fünf Jahre dauernden und von der BASt koordinierten Projekt, beteiligten sich Institute aus 18 europäischen Ländern. Das Ergebnis ist eine umfassende Bestandsaufnahme sowie konkrete Maßnahmenvorschläge. Die Arbeit der BASt umfasst im großen Maße auch den Ausbau und Erhalt der gesamten Straßeninfrastruktur. Der Beitrag "Wie bauen wir in der Zukunft: Straßenbau ohne OEl?" geht beispielsweise der Frage nach, wie wir bei immer knapper werdenden und teuer zu bezahlenden Ressourcen unsere Straßen zukünftig erhalten und ausbauen werden. Auch die Aktion "auf" der Straße spielt eine große Rolle in der BASt. Seit Jahren zeichnet sich ein Mangel an Parkplätzen für Lkw an Bundesautobahnen ab. Um hier Abhilfe zu schaffen, hat die BASt einen neuen Steuerungsansatz entwickelt: Beim sogenannten Kompaktparken werden Kapazitäten erhöht und effektiver genutzt, indem Lkw in Reihe, nach ihrer geplanten Abfahrzeit, geparkt werden.
Jahresbericht 2009/2010
(2011)
In der Bundesanstalt für Straßenwesen (BASt) wird bereits seit 60 Jahren Forschungsarbeit für Sicherheit, Effizienz, Ökologie sowie Ökonomie auf dem Gebiet des Straßenverkehrswesens geleistet. Der Jahresbericht stellt die Forschungsschwerpunkte aus den letzten beiden Jahren vor: Viele Einzelmaßnahmen sind im Hinblick auf das sichere Verhalten der Verkehrsteilnehmer nötig. Bei der Umsetzung der Sicherheitskampagne "Runter vom Gas" war es Aufgabe der BASt, das Bundesverkehrsministerium (BMVBS) im Entscheidungsprozess über Zielsetzung, Zielgruppendefinition, Kampagnenbotschaft sowie Form und Dauer der Kampagne zu unterstützen. Durch das "Begleitete Fahren ab 17" und die Einführung eines generellen Alkoholverbotes für Fahranfänger konnten die Unfallzahlen der Fahranfänger in den letzten Jahren deutlich gesenkt werden. Die BASt ist auch an der Entwicklung von Maßnahmen und Kampagnen für weitere Risikogruppen beteiligt, zum Beispiel Zweiradfahrer, Ältere und Kinder. Im Bereich der Fahrzeugtechnik werden kooperative Verkehrssysteme, die auf der Vernetzung von Fahrzeugen oder Fahrzeugen und Verkehrstechnik beruhen, in den Blickpunkt genommen. Geeignete Strategien für eine Bewertung der Wirkung und damit der Effizienz sind zu entwickeln, um die erwarteten Vorteile der kooperativen Verkehrssysteme nutzbar zu machen. Vorausschauende und integrierte Fahrzeugsicherheitssysteme, die neben der passiven auch die aktive Sicherheit verbessern, sind auf dem Vormarsch. Neben der Sicherheit beschäftigen aber auch rechtliche Fragestellungen die Fachleute. Auch die Entwicklung und Verbreitung von Fahrzeugen mit alternativen Antrieben mit all ihren Möglichkeiten und Risiken stellen neue Fragen an die Forschung. Hochautomatisierung (für sehr kurze Zeitspannen) wird von der BASt derzeit in verschiedenen Projekten erforscht. Weiterer Fokus der Forschungsarbeit ist es, die Schonung von Umwelt und Ressourcen zu fördern. Es werden Maßnahmen entwickelt und getestet, um die Schadstoff- sowie die Lärmbelastung zu reduzieren. Beispielsweise wird untersucht, inwieweit Nanopartikel aus Titandioxid zur Reduzierung der Stickoxidkonzentrationen an hoch belasteten Verkehrswegen eingesetzt werden können. In Pilotprojekten werden Verfahren, die sich im Labor bereits bewährt haben "auf der Straße" erprobt. Im Hinblick auf den Klimawandel wurde in der BASt eine Arbeitsgruppe eingerichtet, die sich mit den zu erwartenden Auswirkungen beschäftigt, um diesen rechtzeitig begegnen zu können. Für den Straßenbau ist im Sinne einer nachhaltigen Kreislaufwirtschaft die Verwendung vorhandener Infrastrukturen als Rohstoffquelle zu erforschen und zu nutzen. Bei neuen Asphaltkonzeptionen wird insbesondere eine Steigerung des Wertschöpfungsniveaus angestrebt. In der Abteilung Straßenverkehrstechnik werden Verfahren entwickelt, um unfallauffällige Bereiche im Straßennetz bereits in der Planungsphase zu identifizieren. Die Ausstattung der Straße mit optimierten Verkehrsbeeinflussungsanlagen und Schutzeinrichtungen, ökonomischen Beleuchtungsanlagen sowie dauerhaften, gut sichtbaren Fahrbahnmarkierungen sind Arbeitsschwerpunkte; ebenso der effektive und ökologische Winterdienst sowie gut erkennbare Warn- und Leiteinrichtungen an Arbeitsstellen. Mehrere internationale Projekte, in denen die BASt aktiv mitarbeitet, fokussieren die zivile Sicherheit der gesamten Straßeninfrastruktur. Verkehrsinfrastruktur zu optimieren und zu erhalten ist Forschungsziel im Bereich des Brücken- und Ingenieurbaus. Nachhaltigkeit ist hier zentrales Leitbild für die Zukunft. Um detaillierte Aussagen über die Belastung und den Zustand von Straßen und Brücken zu machen, baut eine abteilungsübergreifende Arbeitsgruppe der BASt ein Netz von Achslastmessstellen auf und erhebt regelmäßig Daten. Diese werden analysiert und fließen in diverse Managementsysteme der Straßen und Bauwerke für Erhaltungs- und Planungsmaßnahmen ein. Im Rahmen der Zustandserfassung und "bewertung von Fahrbahnoberflächen werden zudem alle Bundesfernstraßen alle vier Jahre messtechnisch erfasst. Zustandskarten und spezielle Statistiken sind so jederzeit für die Aufgaben von Bund, Ländern und Dritten verfügbar. Durch einen prozesssicheren automatisierten Straßenbau sollen künftig Schwachstellen beim Straßenbau vermieden werden.
Im Jahresbericht 2007/2008 wird das 25-jährige Standortjubiläum der Bundesanstalt für Straßenwesen in Bergisch Gladbach-Bensberg zum Anlass genommen, auf die Arbeitsergebnisse der vergangenen Jahre zurückzublicken und den Blick in die Zukunft zu richten. Ausgewählte Beiträge aus allen Fachdisziplinen der BASt zeigen, welche Themen von den Mitarbeiterinnen und Mitarbeitern der BASt in den letzten Jahren bearbeitet wurden, wo die Schwerpunkte heute liegen und wie die Aufgaben der Zukunft aussehen.rnAußerdem wird ein kurzer Rückblick auf den Bau der Dienstgebäude in Bensberg und die Entwicklung der BASt in den letzten 25 Jahre gegeben sowie über den Tag der offenen Tür berichtet, an dem das Standortjubiläum in Bensberg zusammen mit etwa 4.000 Gästen gefeiert wurde.rnDie letzten Jahre waren altersbedingt geprägt von vielen personellen Wechseln " auch in der Leitungsebene. Der Generationswechsel ist damit in der BASt nahezu abgeschlossen. Das Kapitel "Mitarbeiterinnen und Mitarbeiter" informiert über die personellen Entwicklungen und Auszeichnungen der Beschäftigten sowie über den Wechsel des Präsidenten im Jahr 2008.rnAbgerundet wird der Jahresbericht mit den Aktivitäten der Öffentlichkeitsarbeit, der Internationalen Zusammenarbeit, einer Zusammenstellung der Publikationen der Jahre 2007 und 2008 sowie Datenbanken und -sammlungen. rn
Jahresbericht 2006
(2007)
Der Jahresbericht der Bundesanstalt für Straßenwesen gibt einen Überblick über die Arbeitsschwerpunkte der BASt im Jahr 2006. Neben grundlegenden Informationen über die BASt werden 31 Projekte aus den fünf Forschungsabteilungen der BASt vorgestellt. Abgerundet wird der Jahresbericht mit den Aktivitäten der Öffentlichkeitsarbeit, der Internationalen Zusammenarbeit, einer Zusammenstellung der zum Teil in der BASt entwickelten und gepflegten Datenbanken und -sammlungen sowie Zahlen und Fakten des Jahres 2006.
The Traffic Accident Research Institute at University of Technology Dresden investigates about 1,000 accidents annually in the area around and in Dresden. These datasets have been summarized and evaluated in the GIDAS (German Accident In-Depth Study) project for 13 years. During the project it became apparent that the specific traffic situation of a covert exit of a passenger car and an intersecting two-wheeler involves a high risk potential. This critical situation develops in a large part due to the lack of visibility between the driver and the intersecting bike. In this paper the accident avoidance potential of front camera systems with lateral field of view, which allows the driver to have an indirect sight into the crossing street area will be presented.
Die schnell fortschreitende Entwicklung der Sensortechnologie und der Aktuatorik bietet Ansätze für neuartige Rückhaltesysteme und kann somit den Schutz des Insassen bei Unfällen erheblich verbessern. Kommende Generationen adaptiver Rückhaltesysteme werden eine dosierte Aktivierung der Schutzwirkung (z.B. mehrstufige Airbags oder Gurtstraffer) abhängig von der Unfallschwere und der Fahrzeugbesetzung erlauben. Um solche Systeme voll auszunutzen, werden Sensoren entwickelt, die die Schwere eines Unfalls in weitaus höherer Auflösung als bisher erkennen können und somit das Einleiten adaptiver Maßnahmen ermöglichen. Diese Systeme werden unter dem Begriff der intelligenten oder adaptiven Rückhaltesysteme zusammengefasst. Ziel des Projektes "Intelligente Rückhaltesysteme" ist es, die möglichen Verbesserungen der passiven Sicherheit durch die neuen Technologien zu analysieren und darzustellen. Außerdem sind die Auswirkungen auf die gesetzlichen Regelungen zu untersuchen, um so mögliche zusätzliche Schutzpotentiale schnell umzusetzen und eventuelle Risiken zu vermeiden. In einer umfangreichen Literaturrecherche wurde zum einen das Unfallgeschehen analysiert. Ergänzend wurden die Schwerpunkte des Pkw-Unfallgeschehens durch eine Auswertung von Unfalldaten der GIDAS untersucht und dargestellt. Zum anderen wurde der Stand der Technik heutiger und zukünftiger Rückhaltesysteme aufgearbeitet und systematisiert. Dabei wurden die bestehenden und zukünftigen Systeme in ihrer Funktionsweise analysiert und durch ein 3-Ebenen-Modell charakterisiert. Mit Hilfe des Abgleichs der Schwerpunkte des realen Unfallgeschehens mit den RHS und der bestehenden Gesetzgebung wurden Potenziale und Wirkbereiche möglicher Maßnahmen skizziert. Auf der Basis einer Expertenbefragung konnten der Entwicklungsstand der iRHS aufgezeigt und Vorschläge zur Erweiterung der bestehenden Sicherheitsgesetzgebung gemacht werden.
Injury probability functions for pedestrians and bicyclists based on real-world accident data
(2017)
The paper is focusing on the modelling of injury severity probabilities, often called as Injury Risk Functions (IRF). These are mathematical functions describing the probability for a defined population and for possible explanatory factors (variables) to sustain a certain injury severity. Injury risk functions are becoming more and more important as basis for the assessment of automotive safety systems. They contribute to the understanding of injury mechanisms, (prospective) evaluation of safety systems and definition of protection criteria or are used within regulation and/or consumer ratings. In all cases, knowledge about the correlation between mechanical behavior and injury severity is needed. IRFs are often based on biomechanical data. This paper is focusing on the derivation of injury probability models from real world accident data of the GIDAS database (German In-depth Accident Study). In contrast to most academic terms there is no explicit term definition or definition of creation processes existing for injury probability models based on empirical data. Different approaches are existing for such kind of models in the field of accident research. There is a need for harmonization in terms of the used methods and data as well as the handling with the existing challenges. These are preparation of the dataset, model assumptions, censored/unknown data, evaluation of model accuracy, definition of dependent and independent variable, and others. In the presented study, several empirical, statistical and phenomenological approaches were analyzed regarding their advantages and disadvantages and also their applicability. Furthermore, the identification of appropriate prediction parameters for the injury severity of pedestrians has been considered. Due to its main effect on injuries of pedestrians and bicyclists, the importance of the secondary impact has also been analyzed. Finally, the model accuracy, evaluated by several criteria, is the rating factor that gives the quality and reliability for application of the resulting models. After the investigation and evaluation of statistical approaches one method was chosen and appropriate prediction variables were examined. Finally, all findings were summarized and injury risk functions for pedestrians in real world accidents were created. Additionally, the paper gives instructions for the interpretation and usage of such functions. The presented results include IRFs for several injury severity levels and age groups. The presented models are based on a high amount of real world accidents and describe very well the injury severity probability of pedestrians and bicyclists in frontal collisions with current vehicles. The functions can serve as basis for the evaluation of effectiveness of systems like Pedestrian-AEB or Bicycle-AEB.
This study aimed at developing an injury estimation algorithm for AACN technologies for Germany and compared them to findings based on Japanese data. The data to build and to verify the algorithm was obtained from the German in-depth Accident Database (GIDAS) and split into a training and a validation dataset. Significant input variables and the generalized linear regression model to predict severe injuries (ISS>15) were selected to maximize area under the receiver operating characteristic curve (AUC). Probit regression with the input parameter multiple impact, delta v, seatbelt use and impact direction gave the largest AUC of 0.91. Sensitivity of the algorithm was validated at 90% and specificity at 76% for an injury risk threshold of 2%. It appears that no major differences between Japan and Germany exist for injury estimation based on delta v and impact direction. However, far side impact and multiple crash events appear to be associated with a larger risk increase in the German data.
Institute for Traffic Accident Research and Data Analysis <Tokyo>rnAbstract: Analyses were conducted to clarify the features of rear-end collisions, using an integrated accident database developed by the Institute for Traffic Accident Research and Data Analysis (ITARDA). Focusing on neck injuries in rear-end collisions, analyses were made of the relation to struck-vehicle properties. Regarding the relation to the initial year of registration, the results did not show that newer vehicles tended to have a lower no-neck-injury rate, which was defined in this study as an index. On the contrary, in some passenger car classes, it was observed that the no-neck-injury rate was higher in newer vehicles. The effect of an active head restraint system, which is one type of anti-whiplash device, was analyzed by using not only the no-neck-injury rate but also a regression analysis. The results showed that the effect of an active head restraint system on suppressing the incidence of neck injuries was statistically significant.rn
The share of high-tensile steel in car bodies has increased over the last years. While occupant safety has generally benefited from this measure, there is a potential risk that, as a result, rescue time may increase considerably. In more than 60% of all car occupant fatalities a technical rescue has been necessary. These are in particular those cases where occupants die immediately at the accident scene. Therefore, in these cases "rescue time" is a very sensitive parameter. In addition to the general analysis of the need of technical rescue and the actual rescue time depending on model years, the injury pattern of occupants requiring technical rescue will be analysed to provide advice for rescue teams. Furthermore, a detailed analysis of rescue measures for the most popular car models depending on the safety cell design is given.
This work describes the results of the experimental activity, illustrating the driving behavior observed in different conditions, relating them to the different methods of ADAS intervention and comparing the driver behavior without ADAS. In the present study, driver behavior was studied in road accidents involving elderly pedestrians, with different ADAS HMIs, as a base to develop a driver model in near missing pedestrian accidents. A literature research was conducted with the aim of finding out the main influencing factors, including environment, boundary conditions, configuration of impact, pedestrian and driver information, when pedestrian fatalities occur and an analysis of frequent road accidents was conducted to get more detailed information about the driver- behavior. In order to obtain more detailed information about pedestrian accidents, real road accidents were reconstructed with multibody simulations on PC-Crash and, by the comparison between literature findings and reconstructions, a generic accident scenario was defined. The generic accident scenario was implemented on the full scale dynamic driving simulator in use at the Laboratory for Safety and Traffic Accident Analysis (LaSIS, University of Florence, Italy) in order to analyse the driving behaviors of volunteers, also considering the influence of ADAS devices. Forty-five young volunteers were enrolled for this study, resulting in forty valid tests on different testing scenarios. Two different scenarios consisted in driving with or without ADAS in the vehicle. Different kinds of ADAS, acoustic and optical, with different time of intervention were tested in order to study the different reactions of the driver. The tests showed some interesting differences between driver's behavior when approaching the critical situation. Drivers with ADAS reacted earlier, but more slowly, depending also on the type of alarm, and often with double reaction when braking. In fact, the results of the activity showed that with ADAS intervention the time to collision (TTC) increases, but the reaction time and braking modality change: a) there is a sort of "latency" time between the accelerator pedal release and the brake pressure; b) the brake pressure is initially less intense. So the driver only partially takes advance from the TTC increase. These differences were valued not only qualitatively, but quantitatively as well. This work revealed to be useful to improve the knowledge of drivers" behavior, in order to realize a driver model that can be implemented to help attaining and assessing higher levels of automation through new technology.
It has been pointed that most of the accidents on the roads are caused by driver faults, inattention and low performance. Therefore, future active safety systems are required to be aware of the driver status to be able to have preventative features. This probe study gives a system structure depending on multi-channel signal processing for three modules: Driver Identification, Route Recognition and Distraction Detection. The novelty lies in personalizing the route recognition and distraction detection systems according to particular driver with the help of driver identification system. The driver ID system also uses multiple modalities to verify the identity of the driver; therefore it can be applied to future smart cars working as car-keys. All the modules are tested using a separate data batch from the training sets using eight drivers" multi-channel driving signals, video and audio. The system was able to identify the driver with 100% accuracy using speech signals of length 30 sec or more and a frontal face image. After identifying the driver, the maneuver/ route recognition was achieved with 100% accuracy and the distraction detection had 72% accuracy in worst case. In overall, system is able to identify the driver, recognize the maneuver being performed at a particular time and able to detect driver distraction with reasonable accuracy.
This work aimed for getting the main features of accidents involving Light Goods Vehicles (LGV), using accident cases collected in the In-Depth Accidents Studies built up at IFSTTAR-LMA (France), in order to analyse thoroughly the proceedings of these accidents and identify the major factors for the different types of LGV. This work was based on the analysis of 88 accident cases involving LGV with a Maximum Authorised Mass inferior to 3.5 tonnes. In particular kinematics reconstruction of these accidents were performed to calculate the average impact speeds and to better understand the compatibility problems between LGV and antagonist vehicles. Specific features have been reviewed to pick up problems concerning safety, maintenance, loading, LGV design: general conditions of the accident, vehicle features, and passive safety. The main results of this study are presented in this paper.
Bus or heavy vehicle passenger accidents are rare events, compared with car accidents, but sometimes leads to a large number of victims especially in rollover crash scenarios. Two accidents occurred in Portugal in 2007 and 2013 in which 28 people died and more than 50 are injured, shown the importance of the investigation of such accidents. For the investigation of these accidents multidisciplinary teams are constituted with engineers and police officers. All the factors involved are taken into consideration including road design, traffic signs, maintenance and hardware, human factors, and vehicle factors. In this work a methodology to an accurate collection of the data is proposed. From the information collected the accident is reconstructed using the PC-CrashTM software. From this all the contribution factors are determined and recommendations to mitigate these crashes are listed. These two accidents are rollover accidents and the analysis of the injuries and its correlation with the use of retention systems is very important. From the medical data and with the dynamics of the accident determined simulations of the occupants with biomechanical models are carried out in order to evaluate the effect of the retention systems in the injuries. This analysis is based on injury criteria (such as Abbreviated Injury Score (AIS) or Injury Severity Scale (ISS)). With this it is possible to determine if the seat belt was worn or not.
In-depth road traffic accident research in Spain is a fairly recent activity. In the past, only accident data that had been retrospectively processed by the national and regional traffic police forces was available. In 1999 Applus+IDIADA set up a permanent accident research unit to carry out indepth analysis of road accidents in Spain. Since then accidents involving cars, motorcycles, coaches and vulnerable road users have been thoroughly studied. The Applus+IDIADA accident research team has carried out work for the various traffic polices in Spain and it is currently involved in several research projects in which accidentology is one of the main tasks. The working methodology of the team is presented in the first part of the paper. In the framework of the European research project "Rollover" (GRD2-2001-50086), Applus+IDIADA has collected data, inspected scenarios and performed virtual reconstructions of twenty-six of the total seventy-six rollover accidents studied. The second half of the paper describes how these accident investigations were used to develop a test procedure for identifying possible improvements to the vehicle structure which augment occupant protection in a rollover scenario. In particular, a proposal for a new drop test for rollover assessment is presented. The cases were analysed for severity, in terms of injury to the occupants and damage to the vehicle, and taking into account whether a seatbelt was worn or not. The worst possible cases were identified as those that had severe occupant injuries and sizable damage to the occupant compartment when seatbelts had been worn. The most severe cases were then analysed further for impact position (roll and pitch angles) and the impact velocity. With these parameters taken into account, the most representative combinations could be found. This resulted in a series of configurations for possible drop tests. The results of the tests indicate where passenger vehicle structures need to be improved in order to increase occupant safety in the event of a rollover crash.
The objective of this study was to identify aspects of the individual experience and behaviour of drivers in intersection accidents. A total of 40 accident drivers sketched their ideas and expectations relating to intersection assistance using the method of Structure Formation Technique. Using this method prepared content cards and relation cards for a subject matter are formed together in a structure through the application of an explicit set of rules. The structures generated in this process were compared with the structures of 20 control persons who have not recently experienced an accident at intersections. The basis for this comparison was a case-control design with matched samples regarding the variables age, sex, education, occupation, driving experience and annual mileage. The results of the accident reports indicate that additional assistance is instrumental in the perception of other road users. Generally the interviewed drivers were open-minded towards the use of intersection assistance systems. Drivers who have recently experienced an accident at intersections significantly more often approved of warning assistance in their vehicle than drivers who have not recently experienced an accident. Further accident experienced drivers favoured warning and information via audio warning more frequently. The ideas of the drivers were strongly shaped by the experiences with already available advanced driver assistance systems. Hence acoustic and visual warnings were generally preferred to tactile warnings. The findings also indicate a relationship between the variable age and the acceptance of automatic vehicle intervention, and the suggestion of a head up display as a configuration of a visual warning system.
The misuse of CRS (child restraint system) is one of the most urgent problems in connection of child safety in cars. Numerous field studies show that more than two thirds of all CRS are used in a wrong way. This misuse could lead to serious injuries for the children. Surprisingly the quality of CRS use is coded much better in accident data (e.g. GIDAS) than the results of observatory field studies show. It is expected that misuse of CRS was not detected by the accident teams in a large number of the cases. An essential part in improving child seats and their usability is the knowledge of the relation between misuse and resulting injuries. For that the analysis and experimental reconstruction of accidents is an important part. For allowing an exact experimental accident reconstruction, it is necessary to have detailed information about the securing situation of the child and about the installation of the CRS in the car.
Rollovers continue to be a major source of heavy truck fatalities when compared to other accident modes. Real world rollover accidents are analyzed and two distinct damage patterns are identified. Damage to heavy truck roofs can occur from lateral loading that transitions to vertical roof loading as the vehicle rolls onto its side and then over onto its roof. A second load path can occur when the vehicle has rolled onto its side and furrows into the ground generating large longitudinal friction forces between the roof and ground. A review of the previous literature and various test methodologies are presented. A sled impact test methodology is presented which allows for structural assessment of a heavy truck cab's crashworthiness in both of these loading environments. Two test series are presented using the sled impact test methodology in order to analyze real world truck rollovers using varying impact platen and contact angles. The structural deformation and failure patterns were found to be consistent with damage seen in real world accident vehicles. In each case, a second equivalent truck cab was then reinforced and tested under similar conditions to evaluate the energy management and crush resistance of a stronger cab structure. These structural reinforcements demonstrated a substantial reduction in roof crush and protected the survival space of the occupant compartment. The sled impact test procedure is an effective method for testing the structural performance of a heavy truck cab in a variety of loading scenarios comparable to real world accidents and ascertaining the load and energy load levels in these accident modes.