Filtern
Erscheinungsjahr
- 2017 (146) (entfernen)
Dokumenttyp
- Konferenzveröffentlichung (64)
- Buch (Monographie) (53)
- Wissenschaftlicher Artikel (19)
- Bericht (6)
- Teil eines Buches (Kapitel) (3)
- Arbeitspapier (1)
Schlagworte
- Deutschland (84)
- Germany (84)
- Forschungsbericht (40)
- Conference (39)
- Research report (39)
- Konferenz (38)
- Unfall (31)
- Accident (30)
- Bewertung (28)
- Evaluation (assessment) (26)
This work describes the results of the experimental activity, illustrating the driving behavior observed in different conditions, relating them to the different methods of ADAS intervention and comparing the driver behavior without ADAS. In the present study, driver behavior was studied in road accidents involving elderly pedestrians, with different ADAS HMIs, as a base to develop a driver model in near missing pedestrian accidents. A literature research was conducted with the aim of finding out the main influencing factors, including environment, boundary conditions, configuration of impact, pedestrian and driver information, when pedestrian fatalities occur and an analysis of frequent road accidents was conducted to get more detailed information about the driver- behavior. In order to obtain more detailed information about pedestrian accidents, real road accidents were reconstructed with multibody simulations on PC-Crash and, by the comparison between literature findings and reconstructions, a generic accident scenario was defined. The generic accident scenario was implemented on the full scale dynamic driving simulator in use at the Laboratory for Safety and Traffic Accident Analysis (LaSIS, University of Florence, Italy) in order to analyse the driving behaviors of volunteers, also considering the influence of ADAS devices. Forty-five young volunteers were enrolled for this study, resulting in forty valid tests on different testing scenarios. Two different scenarios consisted in driving with or without ADAS in the vehicle. Different kinds of ADAS, acoustic and optical, with different time of intervention were tested in order to study the different reactions of the driver. The tests showed some interesting differences between driver's behavior when approaching the critical situation. Drivers with ADAS reacted earlier, but more slowly, depending also on the type of alarm, and often with double reaction when braking. In fact, the results of the activity showed that with ADAS intervention the time to collision (TTC) increases, but the reaction time and braking modality change: a) there is a sort of "latency" time between the accelerator pedal release and the brake pressure; b) the brake pressure is initially less intense. So the driver only partially takes advance from the TTC increase. These differences were valued not only qualitatively, but quantitatively as well. This work revealed to be useful to improve the knowledge of drivers" behavior, in order to realize a driver model that can be implemented to help attaining and assessing higher levels of automation through new technology.
Bus or heavy vehicle passenger accidents are rare events, compared with car accidents, but sometimes leads to a large number of victims especially in rollover crash scenarios. Two accidents occurred in Portugal in 2007 and 2013 in which 28 people died and more than 50 are injured, shown the importance of the investigation of such accidents. For the investigation of these accidents multidisciplinary teams are constituted with engineers and police officers. All the factors involved are taken into consideration including road design, traffic signs, maintenance and hardware, human factors, and vehicle factors. In this work a methodology to an accurate collection of the data is proposed. From the information collected the accident is reconstructed using the PC-CrashTM software. From this all the contribution factors are determined and recommendations to mitigate these crashes are listed. These two accidents are rollover accidents and the analysis of the injuries and its correlation with the use of retention systems is very important. From the medical data and with the dynamics of the accident determined simulations of the occupants with biomechanical models are carried out in order to evaluate the effect of the retention systems in the injuries. This analysis is based on injury criteria (such as Abbreviated Injury Score (AIS) or Injury Severity Scale (ISS)). With this it is possible to determine if the seat belt was worn or not.
Although road infrastructure is developed extensively Brazil is still one of the countries with the most dangerous roads in the world. In order to stop the increasing trend of traffic fatalities of the last few years and to improve traffic safety on Brazilian roads a pilot study on behalf of SAE Brazil started in March 2016 with the goal to lay the foundations for a long-term research activity. Piloting for an in-depth accident investigation the city of Campinas, roughly 100 km north of São Paulo was chosen. The pilot project was carried out with the local partner, the Empresa Municipal de Desenvolvimento de Campinas (EMDEC). The paper reports on the initial training of evidence based accident data collection on-spot, the implementation of the new digital database, the data collection and the first results. An outlook on the planned long-term accident investigations is given.
This paper gives an overview of the in-depth crash investigation activity conducted by the Centre for Automotive Safety Research (CASR) at the University of Adelaide, in South Australia. Recent changes in method include: an expansion in on-call hours for the crash investigation team, providing the option of a phone interview for crash participants to discuss the crash, and downloading objective crash data from vehicle airbag control modules. These changes have resulted in: increased representativeness of crashes by hour of day; a decrease in the over-representation of fatal crashes in our sample; an increase in the proportion of crashes that involved a pedestrian, bicycle or scooter (moped); an increase in the proportion of crash participants consenting to an interview; and an increase in the objective data available, through airbag control module downloads. Our in-depth crash investigations enabled research into road departures that found barriers were a more feasible solution than clear zones for eliminating serious and fatal injury resulting from run off road crashes.
Cyclists are more likely to be injured in fatal crashes than motorised vehicles. To gain detailed and precise behavioural data of road users, i.e. trajectories, a measuring campaign was conducted. Therefore, a black-spot for accidents with cyclists in Berlin, Germany was selected. The traffic has been detected by a fully automated traffic video analysis system continuously for twelve hours. The video surveillance system is capable of automatically extracting trajectories, classifying road user types and precise determining and positioning of conflicts and accidents. Additionally, pre-conflict and pre-accident situations could be analysed to provide further in-depth understanding of accident causation. The evaluation of the measuring campaign comprised the investigation of traffic parameters, e.g. traffic flow, as well as traffic-safety related parameters based on Surrogate Safety Measures (SSM). Furthermore, the spatial and temporal distributions of conflicts involving cyclists were determined. As a result, three possible conflict clusters could be identified, of which one cluster could be confirmed by detailed video analysis, showing conflicts caused by right turning vehicles.
Road condition acquisition and assessment are the key to guarantee their permanent availability. In order to maintain a country's whole road network, millions of high-resolution images have to be analyzed annually. Currently, this requires cost and time excessive manual labor. We aim to automate this process to a high degree by applying deep neural networks. Such networks need a lot of data to be trained successfully, which are not publicly available at the moment. In this paper, we present the GAPs dataset, which is the first freely available pavement distress dataset of a size, large enough to train high-performing deep neural networks. It provides high quality images, recorded by a standardized process fulfilling German federal regulations, and detailed distress annotations. For the first time, this enables a fair comparison of research in this field. Furthermore, we present a first evaluation of the state of the art in pavement distress detection and an analysis of the effectiveness of state of the art regularization techniques on this dataset.
[Introduction:] A large number of road users involved in road traffic crashes recover from their injuries, but some of them never recover fully and suffer from some kind of permanent disability. In addition to loss of life or reduced quality of life, road accidents carry many and diverse consequences to the survivors such as legal implications, economic burden, job absences, need of care from a third person, home and vehicle adaptations as well as psychological consequences. Within an EU funded project MOVE/C4/SUB/2011-294/SI2.628846 (REHABIL AID) these consequences were analyzed more detailed.
Der Erhaltungsstau der deutschen Verkehrsinfrastruktur hat mittlerweile ein Maß erreicht, das zu spürbaren Problemen im Reise- und Güterverkehr führt. Insbesondere der Zustand der Brücken und der der Straßen im nachgeordneten Netz ist offensichtlich nicht mehr als gut zu bezeichnen. Die Politik hat nach vielen Jahren, in denen die Schwerpunkte des Handelns und Investierens in anderen Bereichen gesehen wurden, nunmehr reagiert und stellt deutlich mehr Finanzen zur Verbesserung der Verkehrsinfrastruktur zur Verfügung. Dies zum Anlass zu nehmen, schlicht die baulichen Aktivitäten erheblich zu intensivieren, führt jedoch zu weiteren gravierenden Beeinträchtigungen der Verfügbarkeit des Verkehrsnetzes. Gefragt sind Anstrengungen, die zu einer Verbesserung der Qualitäten im Straßenbau und damit zu einer Verlängerung der Nutzungsdauern von Schichten und ganzen Befestigungen beitragen, um langfristig eine Reduktion der Beeinträchtigungen für den Verkehr zu erwirken.
Ziel der Untersuchung war es, eine Methodik für die HBS-konforme Durchführung und Auswertung von Simulationsstudien zu erarbeiten. Dazu wurden HBS-konforme Standardelemente in den Simulationsprogrammen BABSIM, VISSIM, Aimsun, Paramics und SUMO modelliert und an den Bemessungswerten des HBS kalibriert. Die Ermittlung der Kapazität erfolgte anhand der Identifikation von Zusammenbrüchen des Verkehrsflusses, die durch Steigerung der Verkehrsstärke auf bis zu 120 % der Kapazität nach HBS in der Simulation erzeugt wurden. An Teilknotenpunkten wurden sechs Verhältnisse der Verkehrsstärke auf der Hauptfahrbahn zur Verkehrsstärke des ein- bzw. ausfahrenden Stroms untersucht. Als Kriterium für die Übereinstimmung der in der Simulation ermittelten Kapazität und q-v-Beziehung mit dem HBS wurde eine maximale Abweichung von 5 % festgelegt. Die Fehlergrenze konnte mit den Simulationsprogrammen BABSIM, VISSIM, Aimsun und Paramics in der Regel eingehalten werden, während sich in SUMO größere Abweichungen ergaben. Die Übertragbarkeit der Parametersätze auf nicht HBS-konforme Bemessungssituationen wurde anhand der Daten realer Untersuchungsobjekte überprüft. Im Ergebnis werden Empfehlungen und Standardparameterkombinationen für die HBS-konforme Simulation des Verkehrsablaufs auf Autobahnen bereitgestellt, die als Ausgangsparameter für die Simulation nicht HBS-konformer Untersuchungsobjekte herangezogen werden können.
Durch die in den letzten Jahren enorm gestiegenen Verkehrsbelastungen und damit einhergehenden gestiegenen lokalen Beanspruchungen im Deckblech kommt es bei bestehenden Stahlbrücken mit orthotropen Fahrbahnplatten vermehrt zu Ermüdungsschäden im Bereich der geschweißten Anschlüsse der Längsrippen an das Deckblech (Kategorie-1-Schäden). Ziel des Forschungsprojekts war es zu untersuchen, ob sich durch eine erhöhte mittragende Wirkung des Fahrbahnbelags die lokalen Radlasten besser verteilen lassen und die Spannungen im Bereich der Anschlüsse Längsrippe " Deckblech somit reduziert werden können. Zum Nachweis einer erhöhten mittragenden Wirkung wurden numerische und experimentelle Untersuchungen durchgeführt. Untersucht wurden die folgenden Asphaltvarianten: Gussasphalt als Referenzsystem, sowie hohlraumreiche Asphaltgerüste mit nachträglicher Verfüllung (HANV, verfüllt mit Epoxidharz und mit Bioharz). Zusätzlich wurde untersucht, ob es möglich ist, auf den Einsatz der Pufferschicht zu verzichten, um damit die mittragende Wirkung des Fahrbahnbelags zusätzlich zu erhöhen. Die experimentellen Untersuchungen umfassten sowohl statische als auch dynamische 5-Punkt-Biegeversuche, die bei unterschiedlichen Temperaturen durchgeführt wurden. Die Prüfkörper bestanden aus einem Stahlblech mit Asphaltbelag und Pufferschicht nach ZTV-ING Teil 7, Abschnitt 4 und einer Abdichtung nach Bauart 1. Während der Versuchsdurchführung wurden die Verformungen an der Unterkante des Stahlblechs gemessen. Aus den aufgezeichneten Versuchsdaten wurden zunächst Kraft-Verformung-Kurven erstellt, aus denen anschließend Verformungsmodule abgeleitet wurden, um die mittragende Wirkung der einzelnen Belagsvarianten zu bewerten. Auf Grundlage der experimentellen Untersuchungen ließen sich lediglich erste Tendenzen zur Erhöhung der mittragenden Wirkung ableiten. Der geringe Prüfumfang von zwei Prüfkörpern je Variante und die teilweise starken Streuungen in den Versuchsergebnissen ließen keine quantitative Bewertung der Ergebnisse zu. Die numerischen Untersuchungen an einem 3D-Finite-Elemente-Modell ergaben, dass sich durch eine höhere Asphaltsteifigkeit die Spannungen im Deckblech um bis zu 40 % reduzieren lassen. Der Verzicht auf die Pufferschicht kann bei niedrigen Asphaltsteifigkeiten, so wie sie beim derzeit eingesetzten Gussasphalt vorliegen, ebenfalls eine Reduktion der Spannungen um ca. 25% bewirken. Für eine quantitative Bewertung der untersuchten Varianten sind Großbauteilversuche unverzichtbar. Hierdurch ließen sich herstellungsbedingte Streuungsfaktoren minimieren und die Auswirkungen der Verwendung von verfüllten Asphaltmaterialien am tatsächlichen Detail Längsrippe " Deckblech untersuchen.