Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (152)
- Buch (Monographie) (114)
- Arbeitspapier (14)
- Bericht (4)
- Wissenschaftlicher Artikel (2)
Volltext vorhanden
- ja (286) (entfernen)
Schlagworte
- Unfall (286) (entfernen)
Recently, EuroNCAP updated the upper legform test protocols. The main objective of this study is to establish the upper legform test in KIDAS (Korean In-depth Accident Study) taking into account domestic pedestrian accident data as well as anthropometric data to protect elderly pedestrians whose average height and weight is much smaller and lighter than other age groups, especially compared to Europeans. Therefore 230 cases of pedestrian accidents from KIDAS were investigated to explore the injury severity of body regions as well as age related injury patterns. Injuries of all body regions were examined, with a special focus on injuries of abdomen and pelvic area. On the other hand, in order to explore Korea's pedestrian accident environment, national police data and KIDAS (Korean In-depth Accident Study) data were compared. The results should be taken into account in future analyses and possible improvements, such as regulations and KNCAP test protocols, of the pedestrian safety policy in Korea.
Injuries in motorbike accidents in correlation with protective clothes and mechanism of the accident
(2013)
This study deals with a possible connection between safety clothing / accident mechanism and injury severity in a state-wide traffic accident investigation with focus on light and small motorbike-involvement for accidents in the area of the Saarland in which the persons riding the bike have been injured or killed. An interdisciplinary team of medical scientists and engineers collected the medical and technical data as well as all the relevant traces of the accident on scene and in time. During twenty months of data collection a total of 401 cases could be gathered. Grave injuries were more common for the group of heavier motorcycles (>125 ccm). Motorcyclists had been polytraumatized only in the group where the accident was connected with a collision. Significant correlation between protective clothes and injury severity could only be found for protective gloves and protective trousers. The knowledge about mechanism of the accident, protective clothes and severity of injuries can be helpful for the improvement of road and motorcyclists' safety.
Nowadays, traffic accidents are recorded in historical databases. Regarding the huge quantity of data, the use of data mining tools is essential to help Experts, for automatically extracting relevant information in order to establish and quantify relations between severity and potential factors of accidents. An innovative approach is here proposed for an in depth investigation of real world accidents data base. Mutual information ratio based on conditional entropies is used to quantity the association strength between an accident outcome descriptor (injury severity) and other potential association factors. Information theoretic methods help to select automatically groups of factors mostly responsible of the severity of accident.
This work describes the results of the experimental activity, illustrating the driving behavior observed in different conditions, relating them to the different methods of ADAS intervention and comparing the driver behavior without ADAS. In the present study, driver behavior was studied in road accidents involving elderly pedestrians, with different ADAS HMIs, as a base to develop a driver model in near missing pedestrian accidents. A literature research was conducted with the aim of finding out the main influencing factors, including environment, boundary conditions, configuration of impact, pedestrian and driver information, when pedestrian fatalities occur and an analysis of frequent road accidents was conducted to get more detailed information about the driver- behavior. In order to obtain more detailed information about pedestrian accidents, real road accidents were reconstructed with multibody simulations on PC-Crash and, by the comparison between literature findings and reconstructions, a generic accident scenario was defined. The generic accident scenario was implemented on the full scale dynamic driving simulator in use at the Laboratory for Safety and Traffic Accident Analysis (LaSIS, University of Florence, Italy) in order to analyse the driving behaviors of volunteers, also considering the influence of ADAS devices. Forty-five young volunteers were enrolled for this study, resulting in forty valid tests on different testing scenarios. Two different scenarios consisted in driving with or without ADAS in the vehicle. Different kinds of ADAS, acoustic and optical, with different time of intervention were tested in order to study the different reactions of the driver. The tests showed some interesting differences between driver's behavior when approaching the critical situation. Drivers with ADAS reacted earlier, but more slowly, depending also on the type of alarm, and often with double reaction when braking. In fact, the results of the activity showed that with ADAS intervention the time to collision (TTC) increases, but the reaction time and braking modality change: a) there is a sort of "latency" time between the accelerator pedal release and the brake pressure; b) the brake pressure is initially less intense. So the driver only partially takes advance from the TTC increase. These differences were valued not only qualitatively, but quantitatively as well. This work revealed to be useful to improve the knowledge of drivers" behavior, in order to realize a driver model that can be implemented to help attaining and assessing higher levels of automation through new technology.
76 severe traffic accidents had been investigated in depth in an ongoing Volkswagen-Tongji University joint accident research project in JiaDing district, Shanghai, PR China since June 2005. With a methodology similar to German accident research units in Dresden and Hannover, a research team proceeds to the scene immediately after the incident to investigate and collect various data on environment, accident occurrence, vehicle state and deformations as well as injuries. The data combined with the results of accident reconstruction will be stored in a database for further statistical and casuistic analysis. The first outcome of the project supports the hypothesis that a main causation for the large number of traffic accidents in China is the lacking of risk awareness in Chinese driver behaviour. Low seat-belt use and the high proportion of vulnerable and poorly protected two-wheelers in traffic are reasons for the high injury and fatality rate in China. The research work shows that accident research in China is feasible and able to give support to tackle one of the urging problems in Chinese development.
This work aimed for getting the main features of accidents involving Light Goods Vehicles (LGV), using accident cases collected in the In-Depth Accidents Studies built up at IFSTTAR-LMA (France), in order to analyse thoroughly the proceedings of these accidents and identify the major factors for the different types of LGV. This work was based on the analysis of 88 accident cases involving LGV with a Maximum Authorised Mass inferior to 3.5 tonnes. In particular kinematics reconstruction of these accidents were performed to calculate the average impact speeds and to better understand the compatibility problems between LGV and antagonist vehicles. Specific features have been reviewed to pick up problems concerning safety, maintenance, loading, LGV design: general conditions of the accident, vehicle features, and passive safety. The main results of this study are presented in this paper.
This study aimed to identify the occurrence, type and mechanisms of the traumatic injuries of the vulnerable road users in vehicle collisions, and to determine the effects of human, engineering, and environment factors on traffic accidents and injuries. The pedestrian accident cases were collected in the years 2000 to 2005 from Changsha Wujing hospital China and Accident Research Unit at Medical University Hannover in Germany. A statistic analysis was carried out using the collected accident data. The results from analysis of Changsha data were compared with results from analysis of GIDAS data Hannover. The injury severities were determined using AIS code and ISS values. The results were presented in terms of cause of injuries, injury distributions, injury patterns, injury severity. The factors influenced the injury outcomes were proposed and discussed for the vehicle transport environment and road users. The results were discussed with regard to accident data collection, accident sampling and injury distributions etc. In the urban area of Changsha, motorcycles and passenger cars are most frequently involved in vehicle pedestrian accidents. Head and lower extremities injuries are the predominant types of pedestrian injuries. The pedestrian accidents were identified as vital issue in urban traffic safety and therefore a high priority should be given to this road user group in research of safe urban transportation. In Hannover area, cars are most frequently involved in traffic accidents, injured pedestrians are involved in road traffic of Germany in 13% of all causalities only in 2005 and have nearly the same number as motorcyclists, but the half of bicyclists.
Bus or heavy vehicle passenger accidents are rare events, compared with car accidents, but sometimes leads to a large number of victims especially in rollover crash scenarios. Two accidents occurred in Portugal in 2007 and 2013 in which 28 people died and more than 50 are injured, shown the importance of the investigation of such accidents. For the investigation of these accidents multidisciplinary teams are constituted with engineers and police officers. All the factors involved are taken into consideration including road design, traffic signs, maintenance and hardware, human factors, and vehicle factors. In this work a methodology to an accurate collection of the data is proposed. From the information collected the accident is reconstructed using the PC-CrashTM software. From this all the contribution factors are determined and recommendations to mitigate these crashes are listed. These two accidents are rollover accidents and the analysis of the injuries and its correlation with the use of retention systems is very important. From the medical data and with the dynamics of the accident determined simulations of the occupants with biomechanical models are carried out in order to evaluate the effect of the retention systems in the injuries. This analysis is based on injury criteria (such as Abbreviated Injury Score (AIS) or Injury Severity Scale (ISS)). With this it is possible to determine if the seat belt was worn or not.
Although road infrastructure is developed extensively Brazil is still one of the countries with the most dangerous roads in the world. In order to stop the increasing trend of traffic fatalities of the last few years and to improve traffic safety on Brazilian roads a pilot study on behalf of SAE Brazil started in March 2016 with the goal to lay the foundations for a long-term research activity. Piloting for an in-depth accident investigation the city of Campinas, roughly 100 km north of São Paulo was chosen. The pilot project was carried out with the local partner, the Empresa Municipal de Desenvolvimento de Campinas (EMDEC). The paper reports on the initial training of evidence based accident data collection on-spot, the implementation of the new digital database, the data collection and the first results. An outlook on the planned long-term accident investigations is given.
This paper gives an overview of the in-depth crash investigation activity conducted by the Centre for Automotive Safety Research (CASR) at the University of Adelaide, in South Australia. Recent changes in method include: an expansion in on-call hours for the crash investigation team, providing the option of a phone interview for crash participants to discuss the crash, and downloading objective crash data from vehicle airbag control modules. These changes have resulted in: increased representativeness of crashes by hour of day; a decrease in the over-representation of fatal crashes in our sample; an increase in the proportion of crashes that involved a pedestrian, bicycle or scooter (moped); an increase in the proportion of crash participants consenting to an interview; and an increase in the objective data available, through airbag control module downloads. Our in-depth crash investigations enabled research into road departures that found barriers were a more feasible solution than clear zones for eliminating serious and fatal injury resulting from run off road crashes.
Unfortunately, there has been a high number of accident fatalities reported in the Czech Republic in recent years. There are many causes which have led to a growth in the number of road traffic accidents. Since 1990, traffic density has demonstrated an upward moving tendency, daily traffic-jams are on the increase in many cities and traffic capacity on roads and streets is not able to satisfy this increasing density. Moreover, many road users lack experience in terms of driving modern cars. The National Accident Study of the Czech Republic is based on the assumption that the year 2010 is considered as a pilot project with the testing operation of collecting and evaluating data from traffic accidents. From the beginning of 2011, a fully-functional structure of the Traffic Accident Research will be created and solid data generated. Based on this assumption, we hope to begin meaningful cooperation with foreign countries.
In-depth road traffic accident research in Spain is a fairly recent activity. In the past, only accident data that had been retrospectively processed by the national and regional traffic police forces was available. In 1999 Applus+IDIADA set up a permanent accident research unit to carry out indepth analysis of road accidents in Spain. Since then accidents involving cars, motorcycles, coaches and vulnerable road users have been thoroughly studied. The Applus+IDIADA accident research team has carried out work for the various traffic polices in Spain and it is currently involved in several research projects in which accidentology is one of the main tasks. The working methodology of the team is presented in the first part of the paper. In the framework of the European research project "Rollover" (GRD2-2001-50086), Applus+IDIADA has collected data, inspected scenarios and performed virtual reconstructions of twenty-six of the total seventy-six rollover accidents studied. The second half of the paper describes how these accident investigations were used to develop a test procedure for identifying possible improvements to the vehicle structure which augment occupant protection in a rollover scenario. In particular, a proposal for a new drop test for rollover assessment is presented. The cases were analysed for severity, in terms of injury to the occupants and damage to the vehicle, and taking into account whether a seatbelt was worn or not. The worst possible cases were identified as those that had severe occupant injuries and sizable damage to the occupant compartment when seatbelts had been worn. The most severe cases were then analysed further for impact position (roll and pitch angles) and the impact velocity. With these parameters taken into account, the most representative combinations could be found. This resulted in a series of configurations for possible drop tests. The results of the tests indicate where passenger vehicle structures need to be improved in order to increase occupant safety in the event of a rollover crash.
The NHTSA-sponsored Crash Injury Research and Engineering Network (CIREN) has collected and analyzed crash, vehicle damage, and detailed injury data from over 4000 case occupants who were patients admitted to Level-I trauma centers following involvement in motor vehicle crashes. Since 2005, CIREN has used a methodology known as "BioTab" to analyze and document the causes of injuries resulting from passenger vehicle crashes. BioTab was developed to provide a complete evidenced-based method to describe and document injury causation from in-depth crash investigations with confidence levels assigned to the causes of injury based on the available evidence. This paper describes how the BioTab method is being used in CIREN to leverage the data collected from in-depth crash investigations, and particularly the detailed injury data available in CIREN, to develop evidence-based assessments of injury causation. CIREN case examples are provided to demonstrate the ability of the BioTab method to improve real-world crash/injury data assessment.
As the official German catalogue of accident causes has difficulty in matching the increasing demands for detailed psychologically relevant accident causation information, a new system, based on a "7 Steps" model, so called ACASS, for analyzing and collecting causation factors of traffic accidents, was implemented in GIDAS in the year 2008. A hierarchical system was developed, which describes the human causation factors in a chronological sequence (from the perception to concrete action errors), considering the logical sequence of basic human functions when reacting to a request for reaction. With the help of this system the human errors of accident participants can be adequately described, as the causes of each range of basic human functions may be divided into their characteristics (influence criteria) and further into specific indicators of these characteristics (e.g. distraction from inside the vehicle as a characteristic of an observation-error and the operation of devices as an indication for distraction from inside the vehicle. The causation factors accordingly classified can be recorded in an economic way as a number is assigned to each basic function, to each characteristic of that basic function and to each indicator of that characteristic. Thus each causation factor can be explicitly described by means of a code of numbers. In a similar way the causation factors based on the technology of the vehicle and the driving environment, which are also subdivided in an equally hierarchical system, can be tagged with a code. Since the causes of traffic accidents can consist of a variety of factors from different ranges and categories, it is possible to tag each accident participant with several causation factors. This also opens the possibility to not only assign causation factors to the accident causer in the sense of the law, but also to other participants involved in the accident, who may have contributed to the development of the accident. The hierarchical layout of the system and the collection of the causation factors with numerical codes allow for the possibility to code information on accident causes even if the causation factor is not known to its full extent or in full detail, given the possibility to code only those cause factors, which are known. Derived from the systematic of the analysis of human accident causes ("7 steps") and from the practical experiences of on-scene interviews of accident participants, a system was set in place, which offers the possibility to extensively record not only human causation factors in a structured form. Furthermore, the analysis of the human causation factors in such a structured way provides a tool, especially for on-scene accident investigations, to conduct the interview of accident participants effectively and in a structured way.
The increasing economics in India has an enormous growth of its road traffic. As observed from official Indian accident statistics the number of road fatalities are one of the highest worldwide. In contrast to most industrialized nations they have an rapidly increasing trend. To come along with this trend it becomes more than essential to understand the traffic accident situation. The official Indian accident statistics gives a glimpse of only basic information. Therefore more detailed data is needed. By using In-depth accident data and officially representative statistics the current accident situation can be evaluated in India, if a suitable weighting methodology is considered. Hence in 2009/2010 a pilot study with the collaboration partner JP-Research India pvt. Ldt. was gathered in Tamil Nadu in south of India. In-depth accident investigations were done around the Coimbatore area on four highways. At first, the collected data is evaluated. Due to consequent and continuous further development based on the first approach a methodology similar to NASS/CDS/GES in the US and GIDAS in Germany was developed. Of course all relevant accident related parameters including pictures and severity information were collected. As a matter of fact based on scaled sketches and reconstruction benefit analyses can be done in order to analyze the accident scenery in India. As a first outcome influence from infrastructure, missing education and vehicle safety were identified as key parameters in order to reduce the number of accidents and casualties. To compare the accident situation against international standards an accident classification for left hand traffic was developed based on the German Insurance classification system. Looking into detail additional accident types were identified and added to create an Indian accident type catalogue. The positive results encouraged several OEMs to participate in this investigation and together with BOSCH a consortium was established in 2010/11. Within one year from beginning in May 2011 about 200 highway accidents were collected, reported and reconstructed using the new standard. Hence a first good overview of the accident situation is available for the Coimbatore Tamil Nadu area. The major target for establishing accident investigations is the extension towards other states of India and urban areas to achieve a better overview of the accident scenery. Therefore local and national authorities have to be embedded in order to strengthen the awareness against traffic safety.
Ziel dieses Forschungsvorhabens war es, das bisherige Gewichtungs- und Hochrechnungsverfahren für die örtlichen Unfallerhebungen in den Regionen Hannover und Dresden zu überprüfen und an die aktuellen Rahmenbedingungen anzupassen. Darüber hinaus sollten neue Möglichkeiten der gemeinsamen Hochrechnung von Ergebnissen aus beiden Erhebungsgebieten unter Berücksichtigung der aktuellen Datenlage, insbesondere in der amtlichen Unfallstatistik, untersucht und entsprechende statistische Verfahren entwickelt werden. Der Stichprobenplan der Erhebungen folgt einem zweistufigen Stichprobenverfahren. Tests mit einem zweistufigen Hochrechnungsverfahren der Hannover-Stichproben 2000 und 2001 auf die Gesamtheit Hannover haben jedoch ergeben, dass die theoretisch zu erwartenden Vorteile dieser zweistufigen Methode im Vergleich zur "einfachen Gewichtung" in der Praxis relativ gering sind. Unter Beibehaltung der bisherigen Gewichtungsprozedur (Anpassung an eine n-dimensionale Kontingenztabelle) wurden daher für die regionalen Hochrechnungen Dresden und Hannover alternative Methoden entwickelt, in der z.B. das Merkmal Ortslage durch die Unfallart ersetzt oder zusätzlich die Anzahl Unfallbeteiligter zur Gewichtung herangezogen wird. Leider erbringen diese Verfahren im Vergleich zur bisherigen (simultanen) Gewichtung nach Unfallschwere, Tageszeit und Ortslage nur wenige oder gar keine Verbesserungen der Anpassungsgenauigkeit bei Merkmalen der amtlichen Statistik, die nicht in die Gewichtung eingehen. Unabhängig vom Gewichtungsverfahren lässt die Abbildungsgenauigkeit bei einzelnen Variablen sehr zu wünschen übrig. Auf der Basis der Stichprobendaten 2000 wurde ferner noch ein Gewichtungsverfahren für Hochrechnungen auf das Bundesgebiet entwickelt und anhand der beiden Einzelstichproben sowie der gepoolten Stichprobe (Dresden plus Hannover) getestet. Die gepoolten Stichprobe zeigte die besten Ergebnisse. Allerdings ließen sich auch auf der Grundlage der gepoolten Daten nicht bei allen Merkmalen (gemeint sind hier Merkmale, die nicht Gewichtungsmerkmale sind) Verbesserungen des Fits erzielen. Es bleiben relativ große Abweichungen zwischen der gewichteten gepoolten Stichprobe und den bundesdeutschen Verteilungen. Es ist zu erwarten, dass auch bei vielen GIDAS Merkmale durch die Gewichtung keine essentielle Korrektur der Stichprobenverzerrungen erzielt werden kann. Insgesamt hat sich gezeigt, dass es auch mit alternativen, meist hierarchischen Gewichtungsverfahren nicht möglich ist, alle Merkmale, deren Verteilungen aus der amtlichen Statistik bekannt sind, mit hinreichender Genauigkeit an die Verhältnisse der Grundgesamtheit anzupassen. Es ist zu erwarten, dass sich dies bei den eigentlich hochzurechnenden originären GIDAS-Variablen ähnlich darstellt. Somit muss der Ansatz eines einheitlichen Verfahrens für alle Jahre und beide Erhebungsgebiete in Frage gestellt werden. Für besonders wichtige Fragestellungen sollte daher eine spezielle, auf das jeweilige Untersuchungsmerkmal abgestellte Gewichtung durchgeführt werden, wie dies exemplarisch am Beispiel der maximalen Kollisionsgeschwindigkeit gezeigt wurde. Schließlich werden im Bericht noch Empfehlungen zur Datenqualität und zu der Frage gegeben, wie sich das derzeit praktizierte Stichprobenverfahren im Hinblick auf die Gewinnung einer repräsentativen Stichprobe möglicherweise verbessern lässt.
Im Auftrag des Bundesministeriums für Verkehr, Bau und Wohnungswesen führt die Bundesanstalt für Straßenwesen (BASt) "Streckenbezogene Unfallanalysen auf BAB" durch. Für detaillierte Unfallanalysen einzelner BAB-Abschnitte sind Kenntnisse über den Zusammenhang zwischen (stündlicher) Verkehrsstärke und Unfallgeschehen von grundsätzlicher Bedeutung. Im Mittelpunkt der vorliegenden Untersuchung steht die Analyse des Zusammenhangs zwischen der Verkehrsstärke und dem Unfallgeschehen. Zum besseren Verständnis werden zusätzlich die Daten und Berechnungsgrundlagen sowie Rahmenbedingungen (z.B. zeitliche Einflüsse) thematisiert. Diese Punkte sind wesentliche Grundlagen streckenbezogener Unfallanalysen. Der Zusammenhang zwischen (stündlicher) Verkehrsstärke und Unfallgeschehen wurde unter Zuhilfenahme von stündlich und richtungsgetrennt vorliegenden Verkehrsstärkedaten der Dauerzählstellen auf BAB analysiert. Bei Verwendung von stündlichen Verkehrsstärken als Berechnungsgrundlage für die Unfallraten ergaben sich deutliche funktionale Zusammenhänge. Neben der Verkehrsstärke zeigen sich weitere Einflussfaktoren wie z.B. die zeitliche Verteilung der Unfälle. Besonders im Tagesverlauf nach der Unfallstunde ist ein deutlicher Zusammenhang zwischen Verkehrsstärke und Unfallrate zu beobachten. Im Rahmen der streckenbezogenen Unfallanalysen wird für die Berechnung von Raten der für alle Abschnitte verfügbare Querschnitts-DTV auf beide Fahrtrichtungen aufgeteilt. Dies erfolgt unter der Annahme, dass sich der Verkehr im Jahresmittel gleichmäßig auf beide Fahrtrichtungen verteilt. Durch Auswertung der fahrtrichtungsgenau vorliegenden DTV-Werte der Dauerzählstellen konnte nachgewiesen werden, dass bei 95% der Dauerzählstellen die Abweichung des fahrtrichtungsgenauen vom halben Querschnitts-DTV unter +/-5% liegt und somit die Unfallrate nur geringfügig verzerrt wird. Besonders hohe Abweichungen von +/-10% und mehr zeigten sich lediglich an 5 Zählstellen. In Abschnitt 7 werden die Grundlagen der Ermittlung signifikanter Unfallhäufungen beschrieben. Eine Voraussetzung für die statistische Ermittlung von Unfallhäufungen ist die Annahme, dass die berechneten Unfallraten weitestgehend unabhängig vom DTV sind. Diese Annahme wurde unter Zuhilfenahme richtungsgetrennt vorliegender Verkehrsstärkedaten der Dauerzählstellen auf BAB geprüft. Bei Verwendung von DTV-Werten (als Jahresmittelwerten) war eine Abhängigkeit zwischen Unfallraten und DTV lediglich bei sehr geringen DTV-Werten zu beobachten. Die geforderte Linearitätsbedingung ist bei Verwendung von DTV-Werten damit erfüllt. Ein weiteres Verfahren für die Ermittlung von auffälligen Bereichen im Straßennetz ist in den "Empfehlungen für die Sicherheitsanalyse von Straßennetzen-ESN" beschrieben. Neben der Fahrleistung wird bei diesem Verfahren zusätzlich die Schwere der Unfälle einbezogen, indem die Unfälle mittels Unfallkostensätzen bewertet werden. Durch den Vergleich der tatsächlichen Unfallkostendichte mit einer Grundunfallkostendichte werden als Ergebnis Abschnitte mit hohem Sicherheitspotential identifiziert. In der vorliegenden Untersuchung wurde das Verfahren erstmals bundesweit angewendet und mit den Ergebnissen der Ermittlung "Signifikanter Unfallhäufungen" verglichen. Erwartungsgemäß führen die unterschiedlichen Zielsetzungen der beiden Ansätze zu Unterschieden bei den identifizierten BAB-Abschnitten, die in den differierenden methodischen Ansätzen begründet liegen.
Ziel des Forschungsprojektes "Griffigkeitsprognose an offenporigen Asphalten (OPA)" ist die Weiterentwicklung und Optimierung der Messverfahren und die Entwicklung einer Vorgehensweise zur Griffigkeitsprognose für OPA. Hierzu wurde das Projekt aufgeteilt in den Projektteil 1 "Bestandsaufnahme an vorhandenen Strecken" und den Projektteil 2 "Neue Baumaßnahmen". Im ersten Projektteil wurden die Grundlagen für die Griffigkeitsprognose erarbeitet und Erfahrungen mit dem Seitenkraftmessverfahren (SKM) auf offenporigen Asphalten gewonnen. Hierzu wurden Streckenabschnitte von Bundesfernstraßen zur Untersuchung ausgewählt, die bereits mehrere Jahre unter Verkehr lagen. Ziel des zweiten Projektteils ist die Verifizierung und Weiterentwicklung der im ersten Teil hergeleiteten Vorgehensweise zur Griffigkeitsprognose für offenporige Asphaltdeckschichten. Hierzu wurden Streckenabschnitte ausgewählt, die zu Projektbeginn mit OPA erneuert bzw. instandgesetzt worden sind. Diese Streckenabschnitte wurden für einen Zeitraum von vier Jahren beobachtet. Zur Feststellung des Nullzustandes wurden unmittelbar vor oder nach der Verkehrsfreigabe Bohrkerne entnommen und Messungen mit dem Skid-Resistance-Tester (SRT) durchgeführt. An den Bohrkernen und an Walzsegmentplatten, die anhand von Rückstellproben hergestellt wurden, erfolgten Griffigkeitsprognosen nach dem Polierverfahren Wehner/Schulze (PWS). Die Ergebnisse der bauvertraglichen SKM-Abnahmeprüfungen ergänzten die Datenbasis. Nach zwei und vier Jahren Verkehrsbelastung erfolgten weitere SKM-Messungen, SRT-Messungen sowie Bohrkernentnahmen für PWS-Messungen. Anhand der so gewonnenen Datenbasis wurden die Griffigkeitsentwicklungen dokumentiert und die Ergebnisse der unterschiedlichen Messverfahren vergleichend ausgewertet. In Voruntersuchungen zum Verfahren PWS wurden Einflüsse auf die Präzision aus der Lagerung und Montage der Probekörper in die Prüfeinrichtung untersucht. Probekörper mit deutlichem Bindemittelüberschuss und solche mit künstlichen Gesteinskörnungen zeigten dabei deutliche Veränderungen während längerer Lagerungsdauer. Desweiteren konnte gezeigt werden, dass der Einfluss der Probenvorbehandlung (Sandstrahlen) auf die Ergebnisse der Prognoseprüfung ab einer Beanspruchung von circa 45.000 Überrollungen zu vernachlässigen ist. Hinsichtlich der Prognose der Griffigkeit mit dem PWS-Verfahren wurde festgestellt, dass ein Endpolierwert nach circa 180.000 Überrollungen erreicht wird. Die Prognosekurven der verschiedenen Streckenabschnitte zeigen dabei einen sehr ähnlichen Verlauf, wenn auch auf verschiedenen Griffigkeitsniveaus. Signifikante Abhängigkeiten von der Wahl der Gesteinsart, Bindemittelart oder Mischgutart konnten dabei nicht festgestellt werden. Ebenso sind keine Unterschiede zu erkennen zwischen Bohrkernen und den Walzsegmentplatten. Mithilfe der PWS- und SRT-Messungen konnte der deutlich griffigkeitsmindernde Einfluss des Bindemittelüberschusses unmittelbar vor bzw. nach der Verkehrsfreigabe sowie die weitere Griffigkeitsentwicklung dokumentiert werden. Wie auch schon die Ergebnisse ähnlicher Forschungsprojekte gezeigt haben, gelingt der unmittelbare Bezug der PWS-Überrollungen zur realen Verkehrsbelastung nicht. Die Angabe eines Endpolierwertes und evtl. die qualitative Beurteilung der Prognosekurve sind daher für die Prognose entscheidend. Desweiteren wurden Texturaufnahmen mit dem T3D-Messystem (Prinzip der Streifenprojektion) und einem Digitalmikroskop gemacht. Für die Herstellung eines Zusammenhanges von Griffigkeit und Textur stellten sich die aus der Textur abgeleiteten Rauheitskenngrößen nur bedingt geeignet dar. Die Parameter Flächen- und Kantenschärfe zeigen einen deutlichen Zusammenhang zu den gemessenen Griffigkeiten. Die Formulierung dieser Zusammenhaenge ist Teil eines laufenden Forschungsprojektes. Zur Beantwortung der Frage, ob die Einführung von OPA-Deckschichten auf BAB einen Einfluss auf das Unfallgeschehen hat, wurde die Analyse des ersten Projektteils fortgeführt. Hierzu wurde die Unfallentwicklung der OPA-Streckenabschnitte mit der Unfallentwicklung auf Kontrollstrecken, die andere Deckschichtarten aufweisen, verglichen. Sowohl auf den OPA-Strecken als auch auf den Kontrollstrecken ist eine rücklaeufige Unfallentwicklung eingetreten. In der Summe zeigt sich, dass die offenporigen Asphaltdeckschichten keinen negativen Einfluss auf das Unfallgeschehen haben.
Ziel des Projektes "Griffigkeitsprognose an offenporigen Asphalten (OPA)" ist die Weiterentwicklung und Optimierung der angewendeten Messverfahren sowie die Entwicklung einer Vorgehensweise zur Griffigkeitsprognose für offenporige Asphalte (OPA). Mit Ersterem sollen vor allem Erfahrungen mit dem Seitenkraftmessverfahren (SKM) auf offenporigen Asphalten zur Definition und Verbesserung entsprechender bauvertraglicher Regelungen gewonnen werden, während die anderen Messverfahren dazu dienen, die Verhältnisse "ins Labor" zu holen. Im Rahmen des ersten Teilprojektes "Bestandsaufnahme an vorhandenen Strecken" wurden Strecken zur Untersuchung ausgewählt, die bereits mehrere Jahre unter Verkehr lagen. Auf den Strecken wurden SKM-Messungen (Seitenkraftmessverfahren) sowie SRT-Messungen (Skid Resistance Tester) durchgeführt. Hinsichtlich der Ergebnisse der SRT-Werte wird deutlich, dass die Polierresistenz des Gesteins für die resultierende Griffigkeit der Fahrbahnoberfläche eine zentrale Rolle spielt. Die durchgeführten Untersuchungen zur Geschwindigkeitsabhängigkeit bei SKM-Messungen haben, im Gegensatz zu den Ergebnissen der dichten Beläge, bei den offenporigen Asphalten keine beziehungsweise eine nur sehr geringe Geschwindigkeitsabhängigkeit ergeben. Im Weiteren wurden Bohrkerne entnommen, an denen Messungen und Untersuchungen zur Griffigkeitsprognose mit dem Prüfverfahren nach Wehner/Schulze sowie Texturmessungen durchgeführt werden konnten. Bei den Ergebnissen der Griffigkeitsprognose zeigt der Vergleich der PWS-Werte mit den PSV der eingesetzten Gesteine eine deutlich erkennbare, den PSV entsprechende Reihung. Außerdem deuten die Ergebnisse eindeutig darauf hin, das bei einer Griffigkeitsprognose mit 90.000 Überrollungen Ergebnisse erzielt werden, die deutlich jenseits der Beanspruchungen aus achtjähriger Verkehrsbelastung liegen. Demzufolge ist davon auszugehen, dass eine maximale Überrollungsanzahl von 180.000 Überrollungen für eine Griffigkeitsprognose in jedem Fall ausreichend sein sollte. Die bei SKM-Messungen beobachtete geringe Geschwindigkeitsabhängigkeit des OPA kann durch die PWS-Werte bei unterschiedlichen Geschwindigkeiten auf den Bohrkernen nicht bestätigt werden. Dies kann an dem gegenüber SKM-Messungen deutlich größeren Wasserüberschuss bei Messungen mit der Wehner/Schulze-Anlage liegen. Fahruntersuchungen (Bremsversuche) wurden auf dem Versuchsgelände der BASt in Sperenberg sowie auf einer mit OPA erneuerten Landesstraße durchgeführt. Asphaltbeläge mit einem hohen Mörtelanteil wie der Gussasphalt und der dichte Asphaltbeton, die dem Reifen eine größere Berührungsfläche bieten, haben einen um ca. 10 % höheren mittleren Reibungskoeffizienten als OPA und SMA, bei denen der Reifen vornehmlich über die Flächen des Größtkorns abrollt und dadurch die Berührungsflächen geringer und demzufolge die Reibungskräfte kleiner werden. Ergänzend zur messtechnischen Erfassung erfolgten auch Untersuchungen zur Entwicklung des Unfallgeschehens. Dabei ist sowohl auf den untersuchten OPA-Strecken als auch auf den zum Vergleich ausgewählten Kontrollstrecken eine rückläufige Unfallentwicklung eingetreten. Das Unfallgeschehen hat sich zwar nicht auf allen OPA-Strecken rückläufig entwickelt, dennoch zeigt sich bei Zusammenfassung aller OPA-Strecken, dass diese Deckschichten in der Summe keinen negativen Einfluss auf das Unfallgeschehen haben. Der zweite Teil "Neue Baumaßnahmen" des Projektes "Griffigkeitsprognose an offenporigen Asphalten (OPA)" ist in Teilen bereits durchgeführt, beispielsweise die Fortführung der Untersuchungen zur Griffigkeitsprognose, Messungen der Textur an Bohrkernen sowie eventuell Wiederholungsmessungen in situ und weitere SKM-Messungen.
In an on-going project since 2005, ADAC has been analyzing accidents documented by the ADAC air rescue service. The knowledge derived from real-life accidents serves as a basis for new test configurations and assessment criteria. In 2007, ADAC began looking into the feasibility of international data collection. The idea of Global Accident Prevention was born. Three European partner clubs have begun pioneering the project (ÖAMTC, ANWB, and RACC). The aim is to set up an international accident research network to provide a steady stream of information on road accidents. The FIA Foundation supports ADAC in developing and coordinating this initiative.