Filtern
Erscheinungsjahr
Dokumenttyp
Schlagworte
- Accident (36) (entfernen)
Institut
- Abteilung Fahrzeugtechnik (36) (entfernen)
Eine Literaturstudie gleichen Namens war vor zehn Jahren von der BASt veranlasst worden; nun liegt eine überarbeitete und auf den Stand von 1986/87 gebrachte Fassung vor. Die Anzahl der erfassten Quellen ist von 221 auf 449 gestiegen. In tabellarischen Übersichten werden für einzelne Körperregionen Untersuchungsergebnisse zusammengestellt, die ermittelte oder vermutete Belastungsgrenzen anhand von physikalischen Parametern beschrieben; die Ergebnisse stammen zum überwiegenden Teil aus Leichenversuchen aber auch aus Versuchen mit Freiwilligen und mit Tieren sowie aus Unfallanalysen. Soweit verfügbar werden Untersuchungsergebnisse als Original-Tabellen in einem Anhang wiedergegeben. Damit ist die Auswahl relevanter Arbeiten erleichtert zur Abschätzung von Aufprall-Belastungen des Menschen als Fahrzeuginsasse oder als Fußgänger. Auf einschränkende Gesichtspunkte bei der Gewinnung und der Anwendung solcher Belastungsgrenzen wird hingewiesen und zugleich deren Bedeutung für eine vergleichende Bewertung von sicherheitstechnischen Maßnahmen bestätigt.
The United Nations Economic Commission for Europe Informal Group on GTR No. 7 Phase 2 are working to define a build level for the BioRID II rear impact (whiplash) crash test dummy that ensures repeatable and reproducible performance in a test procedure that has been proposed for future legislation. This includes the specification of dummy hardware, as well as the development of comprehensive certification procedures for the dummy. This study evaluated whether the dummy build level and certification procedures deliver the desired level of repeatability and reproducibility. A custom-designed laboratory seat was made using the seat base, back, and head restraint from a production car seat to ensure a representative interface with the dummy. The seat back was reinforced for use in multiple tests and the recliner mechanism was replaced by an external spring-damper mechanism. A total of 65 tests were performed with 6 BioRID IIg dummies using the draft GTR No.7 sled pulse and seating procedure. All dummies were subject to the build, maintenance, and certification procedures defined by the Informal Group. The test condition was highly repeatable, with a very repeatable pulse, a well-controlled seat back response, and minimal observed degradation of seat foams. The results showed qualitatively reasonable repeatability and reproducibility for the upper torso and head accelerations, as well as for T1 Fx and upper neck Fx. However, reproducibility was not acceptable for T1 and upper neck Fz or for T1 and upper neck My. The Informal Group has not selected injury or seat assessment criteria for use with BioRID II, so it is not known whether these channels would be used in the regulation. However, the ramping-up behavior of the dummy showed poor reproducibility, which would be expected to affect the reproducibility of dummy measurements in general. Pelvis and spine characteristics were found to significantly influence the dummy measurements for which poor reproducibility was observed. It was also observed that the primary neck response in these tests was flexion, not extension. This correlates well with recent findings from Japan and the United States showing a correlation between neck flexion and injury in accident replication simulations and postmortem human subjects (PMHS) studies, respectively. The present certification tests may not adequately control front cervical spine bumper characteristics, which are important for neck flexion response. The certification sled test also does not include the pelvis and so cannot be used to control pelvis response and does not substantially load the lumbar bumpers and so does not control these parts of the dummy. The stiffness of all spine bumpers and of the pelvis flesh should be much more tightly controlled. It is recommended that a method for certifying the front cervical bumpers should be developed. Recommendations are also made for tighter tolerance on the input parameters for the existing certification tests.
Within the process of integrating passenger airbags in the vehicle fleet a problem of compatibility between the passenger airbag and rear-facing child restraint systems was recognised. Especially in the US several accidents with children killed by the passenger airbag were recorded. Taking into account these accidents the deactivation of a present passenger airbag is mandatory if a child is carried in a rear-facing child restraint system at the front passenger seat in all member states of the European Union. This rule is in force since the deadline of 2003/20/EC at the latest. In the past a passenger airbag either could not be disabled or could only be disabled by a garage. Today there are a lot of different possibilities for the car driver himself to disable the airbag. Solutions like an on/off-switch or the automatic detection of a child restraint system are mentioned as an example. Taking into account the need for the deactivation of front passenger airbags two types of misuse can occur: transportation of an infant while the airbag is (still) enabled and transportation of an adult, while the airbag is disabled, respectively. Within a research project funded by BASt both options of misuse were analysed utilising two different types of surveys amongst users (field observations and interviews, Internet-questionnaires). In addition both analysis of accident data and crash tests for an updated assessment of the injury risk caused by the front passenger airbag were conducted. Both surveys indicate a low risk of misuse. Most of the misuse cases were observed in older cars, which offer no easy way to disable the airbag. For systems, which detect a child seat automatically, no misuse could be found. The majority of misuses in cars equipped with a manual switch were caused by reasons of oblivion. Also the accident analysis indicates a minor risk of misuse. From more than 300 cases of the GIDAS accident sample that were analysed, only 24 children were using the front passenger seat in cars equipped with a front passenger airbag. In most of these cases the airbag was deactivated. When misuse occurred the injury severity was low. However, when analysing German single accidents the fatality risk caused by the front passenger airbag became obvious. From the technical point of view, there were important changes in the design of passenger airbags in recent years. Not only volume and shape were modified, but also the mounting position of the entire airbag module was changed fundamentally. Even if these findings do not allow obtaining general conclusions, a clear tendency of less danger by airbags could be identified. For future vehicle development a safe combination of airbags and rear faced baby seats seems to be possible in the long term. This would mean that both types of misuse could be eliminated. For parents an easier use of child seat and car would be the result.
Despite the steadily declining number of pedestrian fatalities and injuries in most European countries during recent decades, pedestrian protection is still of great importance in the European Union as well as in Germany. This is because they still constitute a large proportion of road user casualties and are more likely to suffer serious and fatal injuries than most other road users. In 1999 only car occupants suffered more fatal injuries than pedestrians in Germany. In December 1998, EEVC WG 17 completed their review and updating of the EEVC WG 10 pedestrian test procedure that made it possible to evaluate the protection afforded to pedestrians by the front of passenger cars in an accident. Within the scope of this procedure, four different impactors are used representing those parts of the body which are injured very often and/or very seriously in vehicle-pedestrian-collisions. In a project executed by IKA and BASt, a small family car was tested according to the EEVC WG 17 test procedure. Afterwards modifications to the car were carried out in order to improve the pedestrian protection provided by the vehicle design. There were certain restrictions placed on the level of modifications undertaken, e.g. only minor modifications to vehicle styling and to the vehicle structures, which provide passenger protection. The redesigned vehicle was tested again using the WG 17 test procedure. The test results of the modified vehicle were compared with those of the standard vehicle and evaluated. The results show that considered measures for pedestrian protection in many areas of the vehicle front structure and the use of innovative techniques can lead to a significant reduction of the loads of pedestrians at an acceptable expense.
In the paper it is investigated to what extend one can extrapolate the detailed accident database GIDAS (German In-Depth Accident Study), with survey area Hanover and Dresden region, to accident behavior in other regions and countries within Europe and how such an extrapolation can be implemented and evaluated. Moreover, it is explored what extent of accident data for the target country is necessary for such an extrapolation and what can be done in situations with sparse and low accident information in a target region. It will be shown that a direct transfer of GIDAS injury outcomes to other regions does not lead to satisfactory results. But based on GIDAS and using statistical decision tree methods, an extrapolation methodology will be presented which allows for an adequate prediction of the distribution of injury severity in severe traffic accidents for European countries. The method consists essentially of a separation of accidents into well-described subgroups of accidents within which the accident severity distribution does not vary much over different regions. In contrast the distribution over the various subgroups of accidents typically is rather different between GIDAS and the target. For the separation into the subgroups meaningful accident parameters (like accident type, traffic environment, type of road etc.) have been selected. The developed methodology is applied to GIDAS data for the years 1999-2012 and is evaluated with police accident data for Sweden (2002 to 2012) and the United Kingdom (2004 to 2010). It is obtained that the extrapolation proposal has good to very good predictive power in the category of severe traffic accidents. Moreover, it is shown that iterative proportional fitting enables the developed extrapolation method to lead to a satisfactory extrapolation of accident outcomes even to target regions with sparse accident information. As an important potential application of the developed methodology the a priori extrapolation of effects of (future) safety systems, the operation of which can only be well assessed on the basis of very detailed GIDAS accident data, is presented. Based on the evaluation of the presented extrapolation method it will be shown that GIDAS very well represents severe accidents, i.e. accidents with at least one severely or fatally injured person involved, for other countries in Europe. The developed extrapolation method reaches its limits in cases for which only very little accident information is available for the target region.
The purpose of this paper is to review injuries found in real world lateral collisions and determine the mechanisms responsible for certain kinds of biomechanical failure. During the last years the distribution of deaths among the different types of accidents has changed. Lateral collisions now are the most frequent cause of fatal and other serious injuries. Every third accident is an impact from the side, while every second fatality is the result of a lateral accident. Just a few years ago this value was no higher than 30%. This is probably the result of increasing safety standards for frontal collisions (airbags, seatbelt usage, structural improvements of cars, etc.). Although the number of registered vehicles increased, the total amount of fatalities decreased during the same period. Thus it is now necessary to pay greater attention to the lateral accident situation in order to improve road safety and decrease the number of traffic injuries. Several European organisations had decided to launch the project SID2000, which was funded by the European Commission, with the intention of gathering more knowledge on injuries occurring in lateral accidents and the mechanisms that lead to such injuries. This should enable the group to define the requirements for a new side impact dummy (SID) to be designed. Within the same project the existing TNO-EUROSID 1 was enhanced by another group and the experience gained has now enabled allowed to design a better measuring device for side impacts. The data used for this contribution came from sources from all over Europe and had to be gathered in such a manner that as many accident parameters as possible were taken into account.
Teil 1 des vorliegenden Berichts nimmt zur Frage nach den Erfahrungen mit der (unbewehrten) Helmtragepflicht für Moped/Mokick-Benutzer Stellung. Dabei zeigen die Daten der amtlichen Straßenverkehrsunfallstatistik eine Verbesserung der Verletzungsschwerestruktur, dies allerdings auch schon in den Jahren der Erweiterung der Helmtragepflicht. In Teil 2 wird über das Helmtrageverhalten nach Einführung des Verwarnungsgeldes berichtet. Hier zeigte sich eine deutliche Verbesserung. In Teil 3 schließlich wird die Frage untersucht, ob sich aus der amtlichen Straßenverkehrsunfallstatistik eine überproportionale Beteiligung der jugendlichen Mofabenutzer am Unfallgeschehen nachweisen lässt. In den Jahren 1977 bis 1979 verunglückten insgesamt 87556 Mofabenutzer. Mehr als die Hälfte der Verunglückten war jünger als 18 Jahre; fast zwei Drittel war jünger als 21 Jahre. Nur knapp ein Viertel war 35 Jahre und älter.
Schutz von Fahrzeuginsassen
(1983)
Ausgehend von unfallstatistischen Daten und Ausführungen über Unfallablauf und Unfallfolgen werden Schutzmaßnahmen diskutiert, die das Verletzungsrisiko für Fahrzeuginsassen möglichst niedrig halten. Die Wirksamkeit von Schutzmaßnahmen wird beeinflusst von der Unfallkonstellation, Eigenschaften der Pperson und vom Fahrzeug (Deformationscharakteristik, Auslegung des rückhaltesystems). Die Gesamtwirksamkeit hängt wiederum ab von der Wirksamkeit des Rückhaltesystems, der Benutzungshäufigkeit und der Benutzungsqualität. Die Arbeit endet mit volkswirtschaftlichen Überlegungen und kommt zu dem Schluss, dass auch in Zukunft als wichtigste Maßnahme zum Schutz von Fahrzeuginsassen die Erhöhung der Anlegequote für Sicherheitsgurte anzusetzen ist.
Powered Two Wheelers (PTWs) accidents constitute one of the road safety problems in Europe. PTWs fatalities represent 22% at EU level in 2006, having increased during last years, representing an opposite trend compared to other road users" figures. In order to reduce these figures it is necessary to investigate the accident causation mechanisms from different points of view (e.g.: human factor, vehicle characteristics, influence of the environment, type of accident). SAFERIDER project ("Advanced telematics for enhancing the SAFEty and comfort of motorcycle RIDERs", under the European Commission "7th Framework Program") has investigated PTW accident mechanisms through literature review and statistical analyses of National and In-depth accident databases; detecting and describing all the possible PTW's accident configurations where the implementation of ADAS (Advanced Driver Assistance Systems) and IVIS (In-Vehicle Information Systems) could contribute to avoid an accident or mitigate its severity. DIANA, the Spanish in-depth database developed by CIDAUT, has been analyzed for that purpose. DIANA comprises of accident investigation teams, in close cooperation with police forces, medical services, forensic surgeons, garages and scrap yards. An important innovation is the fact that before injured people arrive to hospitals, photographs and explanations about the possible accident injury mechanisms are sent to the respective hospitals (via 3G GPRS technology). By this, additional information to medical staff can be provided in order to predict in advance possible internal injuries and select the best medical treatment. This methodology is presented in this paper. On the other hand, the main results (corresponding to road, rider and PTW characteristics; pre and post-accident manoeuvres; road layout; rider behaviour; impact points; accident causations;...) from the analyses of the PTW accidents used for SAFERIDER are shown. Only accident types relevant to ADAS and IVIS devices have been considered.
Analyse glättebedingter Unfälle von Güterkraftfahrzeugen mit mehr als 12 t zulässigem Gesamtgewicht
(2022)
Die Überschreitung des möglichen Reibwertpotenzials zwischen Fahrbahn und Reifen stellt nach wie vor ein großes Sicherheitsrisiko dar. Während sich mittlerweile Systeme in der Entwicklung befinden, die das aktuelle Reibwertpotenzial recht verlässlich schätzen können, stellt sich die Frage, auf welche Weise diese Information am besten dem Fahrer* zu übermitteln ist. Diese und weitere Fragen bezüglich des Nutzens einer Reibwertwarnung werden in diesem Projekt beantwortet. Im Laufe dieses Projektes wurde untersucht, welcher Nutzen eine Reibwertwarnung für Güterkraftfahrzeuge darstellt. Mittels einer Probandenstudie im Fahrsimulator der technischen Universität Berlin ließen sich Fahrverhalten feststellen, welche positive Auswirkungen im Falle eines glättebedingten Unfalles hätten. Die Grundlage bildete zunächst die Literaturrecherche, die sowohl Erkenntnisse über den Stand der Technik von Fahrerassistenzsystemen sowie auch Einblicke in die Forschung zur Gestaltung von Warnungen aufzeigte. Zahlreiche Details über das Sicherheitspotenzial, das Angebot der verschiedenen Hersteller, die Gesetzgebung und weiteres hinsichtlich der Fahrerassistenzsysteme wurden ergründet, während zur Gestaltung von Warnungen kognitive Modelle und die Auswirkungen von Warnungen auf einen Probanden untersucht wurden. Folglich war es möglich, zusammen mit einer Expertenrunde und Vorstudien zur Gestaltung der unterschiedlichen Glätte-Icons, eine wissenschaftlich fundierte Warnstrategie herauszuarbeiten, die aus akustischen Signalen, Sprachangaben und grafischen Anzeigen auf einem Head-Up-Display besteht. Parallel dazu wurde mittels einer Analyse von Unfällen von schweren Lkw mit vermindertem Kraftschluss ein Überblick über die Unfallsituation von N3-Lkw verschafft. Dazu wurden die Daten der GIDAS-Unfalldatenbank untersucht und eine repräsentative Zufallsstichprobe der Unfälle, bei denen Kraftschlussminderung eine Rolle gespielt haben könnte, erstellt. Zwei Szenarien wurden hierbei betrachtet: Auffahrunfälle, bei denen der Lkw auf ein weiteres Fahrzeug auffährt, sowie Fahrunfälle, bei denen der Lkw-Fahrer die Kontrolle über sein Fahrzeug verliert. Diese Unfallanalyse bildete dann die Basis für die Szenariengestaltung der Probandenstudie im Fahrsimulator. Kritische Fahrszenarien, unübersichtliche Kurven- und Bergfahrten und ein Stauende hinter einer Kuppe, jeweils gepaart mit Regen, Starkregen oder Nebel und den dazu variierenden Reibwert der Straße, wurden samt der Warnstrategie im Fahrsimulator dargestellt. In der Probandenstudie durchfuhren Kraftfahrzeugfahrer die präparierten Simulationen, wobei die Experimentalgruppe die Glättewarnung erhielt und die Kontrollgruppe die gleiche Simulation ohne Warnung durchfuhr. Die Hauptfragestellungen, die sich stellten, waren, ob die Fahrer mit Warnsystem ihr Verhalten (insbesondere ihre Geschwindigkeit) an den Zustand der Fahrbahn anpassten und ob die Fahrer mit Warnsystem eine bessere Fahrleistung in Gefahrensituationen im Vergleich zu Fahrern ohne Warnsystem zeigen. Außerdem wurde untersucht, wie die Fahrer die Kritikalität der Fahrsituationen einschätzen und wie die Fahrerbewertung bezüglich der Warnstrategie ausfallen. Zusammenfassend zeigte die Studie, dass die Probanden mit Warnung ihr Fahrverhalten besser an die Glättesituation anpassten als Probanden ohne Warnung. Erstere reduzierten ihre Geschwindigkeit deutlich früher und stärker. Die entwickelte Warnstrategie wurde als positiv und hilfreich bewertet und wurde mit einer hohen Akzeptanz von den Probanden angenommen. Durch die Corona-Pandemie fiel die Stichprobengröße der Probanden geringer aus als ursprünglich geplant, was für die Ergebnisse miteinzuberechnen ist. Im Schlussteil dieses Projektes wurde der konkrete Nutzen von Glättewarnsystem bei Lkw in Bezug auf das Unfallgeschehen analysiert. Mit der Kenntnis der Auswirkung eines Glättewarnsystems auf das Fahrverhalten der Lkw-Fahrer konnten die Lkw-Unfälle aus der GIDAS-Datenbank durch eine Vorwärtsrekonstruktion neu simuliert werden, um zu ermitteln, welchen Einfluss das Glättewarnsystem auf den Unfall gehabt hätte. Die Analyse zeigte unter anderem, dass eine Glättewarnung für Lkw bei 12 % aller Unfälle zum Einsatz kommen könnte. Bei einer angenommenen mittleren Reduktion der Fahrgeschwindigkeit der Lkw-Fahrer um 9,6 km/h bei Tempo 80 aufgrund der Glättewarnung wären nahezu 30 % der Kollisionen bei Alleinunfällen oder Unfällen mit Beteiligung eines anderen Fahrzeugs sowohl bei den Lkw als auch bei den Kollisionsgegnern vermieden worden. Ferner hätten mehr als die Hälfte der Lkw und der Kollisionsgegner geringere Kollisionsschweren gehabt. Mittels Verletzungsrisikokurven konnte gezeigt werden, dass durch die geringeren Kollisionsschweren das Risiko, ernsthafte oder schwerere Verletzungen zu erleiden, deutlich gesunken ist. Bei den Lkw-Unfällen mit Fußgängern wären von neun analysierten Unfällen zwei vermieden worden und sieben Unfälle hätten aufgrund der geringeren Kollisionsgeschwindigkeit des Lkws das Potenzial die Verletzungsschwere der Fußgänger zu verringern. * Gender Disclaimer: In diesem Bericht wird aus Gründen der besseren Lesbarkeit das generische Maskulinum verwendet. Dabei werden weibliche und anderweitige Geschlechteridentitäten ausdrücklich mitgemeint, soweit es für die Aussage erforderlich ist.