Filtern
Erscheinungsjahr
Dokumenttyp
Volltext vorhanden
- ja (20) (entfernen)
Schlagworte
- Database (20) (entfernen)
Institut
While accident statistics on a national level are provided by many countries, there is a need for international data that includes more detailed information about the accident, so called in-depth data. As a consequence, accident data projects have been emerging in different regions of the world. This creates a need for comparable and mergeable data from different countries, enabling the use of already existing accident data resources and helping to expedite the improvement of global road safety. While existing approaches focus that mostly on building a comprehensive accident database from scratch, the iGLAD project (Initiative for the Global Harmonization of Accident Data) attempts a more pragmatic approach by building on top of the work already accomplished in this area and complementing it. The target of iGLAD is to help setting up an additional dataset as a compatibility layer between already existing world wide data sets and integrating the structure of these by defining a common data scheme. This dataset is limited to the common denominator between the existing data sets and is inherently rather small and simple. Eventually, an individual converter for each participating accident investigation group will be built that enables pooling all data sets in a common repository. This not only saves costs and time, and hence makes such a target more feasible, but also creates data that is usable right from the start. This paper gives an overview of the current status of iGLAD and first steps taken. Additionally, some methodological aspects are discussed, next to a glance at other projects working currently on related issues, providing additional input for iGLAD. Finally, an overview of next steps and intended future work is given.
Für den in den vergangenen Jahren stark wachsenden Radwegebestand sollten die weitgehend noch fehlenden Verfahrensgrundlagen einer systematischen baulichen Erhaltung erarbeitet werden. Untersuchungsgegenstand waren dabei Radwege mit Asphalt-, Beton- und Pflasterdecken sowie wassergebundenen Decken in Baulast des Bundes. Die Ziele der baulichen Erhaltung bestehen bei den Radwegen ähnlich wie bei Fahrbahnen in der Gewährleistung einer angemessenen Verkehrssicherheit und Befahrbarkeit sowie in einer rechtzeitigen wirtschaftlichen Substanzerhaltung. Als Zustandsmerkmale zur umfassenden Beschreibung der für die Zielkriterien relevanten Schäden und Mängeldienen die vertikalen Schwingbeschleunigungen (Effektivwert in m/s-² pro m) oder die Höhenlängsprofile (pro cm) zur Kennzeichnung der Längsebenheit sowie Risse und sonstige Oberflächenschäden zur Beschreibung des Substanzzustands. Die Substanzmerkmale werden ebenso wie konstruktiv bedingte Mängel (überstehende/abgesackte Einbauten, Bordsteine, Wurzelhebungen) im 1-m-Raster ausgewertet. Das für die Zustandserfassung auf Basis vorliegender in- und ausländischer Erfahrungen entwickelte Messfahrrad ermöglicht mit Elektrounterstützung (Pedelec) eine weitgehend konstante Fahrtgeschwindigkeit von 25 km/h und eine Tagesbefahrungsleistung ≥ 50 km. Aufgezeichnet werden digitale Videos, GPS-Tracks, die vertikale Schwingbeschleunigung (mit Beschleunigungsaufnehmer) und Tonsignale für besondere Markierungen. Bei der Zustandsbewertung werden die für homogene Auswerteabschnitte ermittelten dimensionsbehafteten Zustandsgrößen in dimensionslose Zustandswerte (Noten von 1 bis 5) überführt, um eine Verknüpfung unterschiedlicher Merkmale zum Gebrauchs- und Substanzwert zu ermöglichen. Der Gebrauchswert, der für die Zielkriterien Sicherheit und Befahrbarkeit steht, entspricht bei Radwegen dem Zustandswert der vertikalen Schwingbeschleunigung. Beim Substanzwert werden vereinfachend nur die Risse mit den zusammengefassten restlichen Schäden ("Restschadensfläche") verknüpft. Die mitgeführten Informationen zu den konstruktiv bedingten Mängeln dienen nur zur Steuerung des Erhaltungsgeschehens. Für die Erhaltungsplanung werden zusätzlich zu den Ergebnissen der Zustandserfassung/-bewertung und den Netzkenngrößen mindestens noch die Radwegbreiten, die Deckschichtarten sowie grobe Angaben zum Befestigungsaufbau (standardisiert/nicht standardisiert) und zum Deckenalter benötigt. Derzeit müssen die Daten im Regelfall in einer lokalen Datei für die Erhaltungsplanung vorgehalten werden, die bezüglich der Netzdaten häufig mit der jeweiligen Straßendatenbank abgestimmt werden sollte. Aus den homogenen Auswerteabschnitten dieser Datei werden längere Erhaltungsabschnitte gebildet. Danach können Bereiche ausgesondert werden, für die punktuelle/kleinflächige Maßnahmen der baulichen Unterhaltung zur Beseitigung örtlicher Schäden bzw. konstruktiv bedingter Mängel oder auch Sondermaßnahmen(z. B. bei Wurzelhebungen) zweckmäßig sind. Der Bedarf an Instandsetzungen und Erneuerungen kann auf Basis von Mängelklassen, die ab Zustandswerten von 3,5 (Warnwert) mit Hilfe von Bestands- und Zustandskonstellationen abgrenzbar sind, in ein erstes einfaches, nach Dringlichkeiten sortiertes Erhaltungsprogramm überführt werden. Zuvor kann eine Zustandsfortschreibung mit pragmatisch festgelegten Verlaufsfunktionen erfolgen. Die Kostenwerte für die Instandsetzungs- und Erneuerungsmaßnahmearten für Radwege sind derzeit noch in Analogie zur Fahrbahnerhaltung abgeschätzt. Die ausgearbeiteten Verfahren zur Bewertung der Maßnahmenutzen und zur netzweiten Optimierung von Maßnahmealternativen sind auch für kleine Radwegenetze letztlich nur mit einem IT-Verfahren ("PMS-Radwege") umsetzbar. Im Projektablauf waren vielfach zeitintensive grundlegende Analysen erforderlich. Es ist jedoch gelungen, ein Verfahren zu entwickeln und durch Tests zur Anwendungsreife zu bringen, das auf dem naheliegenden Fahrzeug für die Zustandserfassung von Radwegen, dem Fahrrad, basiert. Auch aufgrund einer sehr eingeschränkten Verwendbarkeit von Daten aus vorliegenden netzweiten Erfassungen sind zur Überprüfung und Verifizierung der entwickelten Verfahren insbesondere zur Erfassung und Auswertung der vertikalen Schwingbeschleunigung wie auch zur Erhaltungsplanung weitere Untersuchungen und Sensitivitätsanalysen erforderlich.
In der Delegierten Verordnung (EU) 2015/962 (Europäische Kommission, 2015) wird von den Mitgliedsstaaten neben der Einrichtung nationaler Zugangspunkte zu Straßen- und Verkehrsdaten auch die gemeinsame Definition von Datenqualitätsindikatoren und Methoden zur Qualitätsbewertung und -kontrolle der verschiedenen Datenarten gefordert. Ziel dieses Projektes war es daher, ein Qualitätsmanagementsystems (QMS) für die Erfassung und Weiterverarbeitung von Daten für IVS-Dienste zu entwickeln und für die Datenarten Baustelleninformationen und Reisezeitinformationen zu spezifizieren. Dazu wurden - der Stand der Wissenschaft und Technik recherchiert, - Kriterien, Kenngrößen und Verfahren zur Messung der Qualität von Baustellen- und Reisezeitinformationen definiert, - ein organisatorischer Rahmen für ein Qualitätsmanagement erstellt, - ein Prozess zur Zertifizierung von bei Organisationen (i. d. R. Datengebern) eingeführten QMS entwickelt und - ein Leitfaden erstellt, der die Organisationen bei der Einführung und Anwendung eines QMS helfen soll. Durch die Einführung, Anwendung und regelmäßige Prüfung des im Rahmen dieses Projektes entwickelten und im zugehörigen Leitfaden beschriebenen QMS kann seitens der Datengeber ein Großteil der im Rahmen des Projektes identifizierten Probleme erkannt und behoben werden. Wesentliche Maßnahmen sind dabei, - die eindeutige Übertragung der Verantwortung für die Qualität der bereitgestellten Informationen auf die Datengeber, - die Bereitstellung (Finanzierung), regelmäßige Schulung und Motivation von zuständigem Personal mit ausreichendem Zeitbudget, - die bereits begonnene Überarbeitung der DATEX- II-Profile, - die Bereitstellung DATEX-II-Profilkonformer Systeme zur Eingabe und Übertragung der Meldungen und - die Lieferung von Qualitätskenngrößen mit den Informationen.
BMS-Entwicklungen
(2002)
The Decision Support System (DSS) is one of the key objectives of the European co-funded research project SafetyCube in order to better support evidence-based policy making. Results will be assembled in the form of a DSS that will present for each suggested road safety measure: details of risk factor tackled, measure, best estimate of casualty reduction effectiveness, cost-benefit evaluation and analytic background. The development of the DSS presents a great potential to further support decision making at local, regional, national and international level, aiming to fill in the current gap of comparable measures effectiveness evaluation. In order to provide policy-makers and industry with comprehensive and well-structured information about measures, it is essential that a systems approach is used to ensure the links between risk factors and all relevant safety measures are made fully visible. The DSS is intended to become a major source of information for industry, policy-makers and the wider road safety community.
Although the annual traffic accident statistics published by the national police is available in public, the detailed traffic accident data has not been released in Korea. Recently the Ministry of Land, Infrastructure and Transport recognized the importance of in-depth accident data to enhance road traffic safety and initiated a research project to establish a collection of the detailed accident data. The main objective of the project is a feasibility study to establish KIDAS (Korea In-Depth Accident Study). Within this project, three university hospitals which are located in mid-size cities have been selected to collect accident data. Annually, more than 500 cases of accidents have been collected from the in-patient's interviews and diagnosis. Unlike GIDAS (German In-Depth Accident Study), currently on-site investigation can"t be performed by the Korean police. The only available data is patient medical records, patient's description of accident circumstances and the damaged vehicle. Occasionally the police provide the accident investigation reports containing very brief information on accident causation and vehicle safety. In a first step, the concept of KIDAS is to adopt the format of iGLAD (Initiative for the Global Harmonization of Accident Data) for harmonization. Since the currently collected accident information is extremely limited compared with GIDAS, the other sources of data and calculations such as KNCAP vehicle data, pc-crash simulations, vehicle registration information, insurance company data are utilized to complete the iGLAD template. Results from KIDAS_iGLAD and the cases of assessment of active safety devices such as AEBS, ESC, and LDWS will be evaluated.
The increasing economics in India has an enormous growth of its road traffic. As observed from official Indian accident statistics the number of road fatalities are one of the highest worldwide. In contrast to most industrialized nations they have an rapidly increasing trend. To come along with this trend it becomes more than essential to understand the traffic accident situation. The official Indian accident statistics gives a glimpse of only basic information. Therefore more detailed data is needed. By using In-depth accident data and officially representative statistics the current accident situation can be evaluated in India, if a suitable weighting methodology is considered. Hence in 2009/2010 a pilot study with the collaboration partner JP-Research India pvt. Ldt. was gathered in Tamil Nadu in south of India. In-depth accident investigations were done around the Coimbatore area on four highways. At first, the collected data is evaluated. Due to consequent and continuous further development based on the first approach a methodology similar to NASS/CDS/GES in the US and GIDAS in Germany was developed. Of course all relevant accident related parameters including pictures and severity information were collected. As a matter of fact based on scaled sketches and reconstruction benefit analyses can be done in order to analyze the accident scenery in India. As a first outcome influence from infrastructure, missing education and vehicle safety were identified as key parameters in order to reduce the number of accidents and casualties. To compare the accident situation against international standards an accident classification for left hand traffic was developed based on the German Insurance classification system. Looking into detail additional accident types were identified and added to create an Indian accident type catalogue. The positive results encouraged several OEMs to participate in this investigation and together with BOSCH a consortium was established in 2010/11. Within one year from beginning in May 2011 about 200 highway accidents were collected, reported and reconstructed using the new standard. Hence a first good overview of the accident situation is available for the Coimbatore Tamil Nadu area. The major target for establishing accident investigations is the extension towards other states of India and urban areas to achieve a better overview of the accident scenery. Therefore local and national authorities have to be embedded in order to strengthen the awareness against traffic safety.
Although road infrastructure is developed extensively Brazil is still one of the countries with the most dangerous roads in the world. In order to stop the increasing trend of traffic fatalities of the last few years and to improve traffic safety on Brazilian roads a pilot study on behalf of SAE Brazil started in March 2016 with the goal to lay the foundations for a long-term research activity. Piloting for an in-depth accident investigation the city of Campinas, roughly 100 km north of São Paulo was chosen. The pilot project was carried out with the local partner, the Empresa Municipal de Desenvolvimento de Campinas (EMDEC). The paper reports on the initial training of evidence based accident data collection on-spot, the implementation of the new digital database, the data collection and the first results. An outlook on the planned long-term accident investigations is given.
The main objective of EC CASPER research project is to reduce fatalities and injuries of children travelling in cars. Accidents involving children were investigated, modelling of human being and tools for dummies were advanced, a survey for the diagnosis of child safety was carried out and demands and applications were analysed. From the many research tasks of the CASPER project, the intention of this paper is to address the following: • In-depth investigation of accidents and accident reconstruction. These will provide important points for the injury risk curve, in order to improve it. Different accident investigation teams collected data from real road accidents, involving child car passengers, in five different European countries. Then, a selection of the most appropriate cases for the injury risk curve and the purposes of the project was made for an in-depth analysis. The final stage of this analysis was to conduct an accident reconstruction to validate the results obtained. The in-depth analysis included on-scene accident investigation, creating virtual simulations of the accident/possible reconstruction, and conducting the reconstruction. In the cases of successful reconstructions, new points were introduced to the injury risk curves. Accident reconstructions of selected cases were carried out in test laboratories as the next step following in-depth road accident investigation. These cases were reconstructed using similar child restraint systems (CRS) and the same type make and model as in the real accidents. Reconstructing real cases has several limitations, such as crash angle, cars" approximation paths and crash speed. However, a few changes and applications on the testing conditions were applied to reduce the limitations and improved the representations of the real accidents. After conducting the reconstructions, a comparison between the deformations of the cars on the real accident and the vehicles from the reconstructions was made. Additionally, a correlation between the data captured from the dummies and the injury data from the real accident was sought. This finalises an in-depth analysis of the accident, which will provide new relevant points to the injury risk curve. The CASPER project conducted a large research programme on child safety. On technical points, a promising research area is the developing injury risk curves as a result of in-depth accident investigations and reconstructions. This abstract was written whilst the project was not yet finished and final results are not yet known, but they will be available by the time of the conference. All the works and findings will not necessarily be integrated in the industrial versions of evaluation tools as the CASPER project is a research program.