Filtern
Erscheinungsjahr
- 2019 (23) (entfernen)
Dokumenttyp
- Konferenzveröffentlichung (23) (entfernen)
Schlagworte
- Berechnung (7)
- Bewertung (7)
- Calculation (7)
- Evaluation (assessment) (7)
- Test method (7)
- Prüfverfahren (6)
- Betonstraße (Oberbau) (5)
- Rigid pavement (5)
- Surfacing (5)
- Condition survey (4)
- Decke (Straße) (4)
- Deformation (4)
- Test (4)
- Verformung (4)
- Versuch (4)
- Accident (3)
- Accident prevention (3)
- Active safety system (3)
- Aktives Sicherheitssystem (3)
- Ausdehnung (mater) (3)
- Beton (3)
- Concrete (3)
- Expansion (3)
- Improvement (3)
- Measurement (3)
- Messung (3)
- Planning (3)
- Planung (3)
- Simulation (3)
- Temperatur (3)
- Temperature (3)
- Unfall (3)
- Unfallverhütung (3)
- Verbesserung (3)
- Zustandsbewertung (3)
- Alte Leute (2)
- Animal (2)
- Autonomes Fahren (2)
- Autonomous driving (2)
- Belastung (2)
- Boden (2)
- Bridge (2)
- Brustkorb (2)
- Brücke (2)
- Carriageway (2)
- Coefficient (2)
- Data acquisition (2)
- Datenerfassung (2)
- Dauerhaftigkeit (2)
- Durability (2)
- Eigenschaft (2)
- Environment protection (2)
- Error (2)
- Fahrbahn (2)
- Festigkeit (2)
- Forecast (2)
- Fußgänger (2)
- Genauigkeit (2)
- Gesetzgebung (2)
- Griffigkeit (2)
- Injury (2)
- Knotenpunkt (2)
- Koeffizient (2)
- Kontrolle (2)
- Lebenszyklus (2)
- Legislation (2)
- Lifecycle (2)
- Load (2)
- Old people (2)
- Pedestrian (2)
- Platte (2)
- Prognose (2)
- Properties (2)
- Quality (2)
- Qualität (2)
- Radfahrer (2)
- Reconstruction (accid) (2)
- Safety (2)
- Schallpegel (2)
- Sicherheit (2)
- Skidding resistance (2)
- Slab (2)
- Soil (2)
- Sound level (2)
- Strength (mater) (2)
- Thorax (2)
- Tier (2)
- Umweltschutz (2)
- Unfallrekonstruktion (2)
- Vegetation (2)
- Verletzung (2)
- Abbiegen (1)
- Accident data (1)
- Accident rate (1)
- Accuracy (1)
- Airbag (1)
- Aircraft (1)
- Ankündigung (1)
- Anthropometric dummy (1)
- Antikollisionssystem (1)
- Autobahn (1)
- Automatische Notbremsung (1)
- Autonomous emergency braking (1)
- Baustoff (1)
- Bauweise (1)
- Bauwerk (1)
- Bearing capacity (1)
- Behaviour (1)
- Bemessung (1)
- Bicyclist (1)
- Bodenbehandlung (1)
- Braking (1)
- Bremsung (1)
- By product (1)
- Böschung (1)
- CEN (1)
- Classification (1)
- Collision avoidance system (1)
- Comprehension (1)
- Conference (1)
- Construction method (1)
- Continuous (1)
- Control (1)
- Cracking (1)
- Crash Test (1)
- Cross roads (1)
- Cyclist (1)
- Damage (1)
- Database (1)
- Datenbank (1)
- Decke [Straße] (1)
- Design (overall design) (1)
- Deutschland (1)
- Development (1)
- Digital model (1)
- Digitale Bildverarbeitung (1)
- Driver (1)
- Driver assistance system (1)
- Driving (veh) (1)
- Dummy (1)
- Durchlässigkeit (1)
- Earthworks (1)
- Ebenheit (1)
- Efficiency (1)
- Engineering structure (1)
- Entwicklung (1)
- Europa (1)
- Europe (1)
- Evenness (1)
- Fahrer (1)
- Fahrerassistenzsystem (1)
- Fahrzeugführung (1)
- Fatality (1)
- Fehler (1)
- Fels (1)
- Fernsteuerung (1)
- Finite element method (1)
- Flächennutzung (1)
- Fracture (bone) (1)
- Fuge (1)
- Game protection fence (1)
- Germany (1)
- Grooving (1)
- Hearing (1)
- Herstellung (1)
- Human body (1)
- Human factor (1)
- Hörvermögen (1)
- Image processing (1)
- Impact study (1)
- Impact study (environment) (1)
- Impact test (crash) (1)
- Industrierückstand (1)
- Information (1)
- Information management (1)
- Instandsetzung (1)
- Internet (1)
- Intersection (1)
- Interview (1)
- Invasive Art (1)
- Invasive plants (1)
- Joint (structural) (1)
- Junction (1)
- Klassifizierung (1)
- Knochenbruch (1)
- Konferenz (1)
- Kontinuierlich (1)
- Kreuzung (1)
- Laboratorium (1)
- Laboratory (not an organization) (1)
- Land use (1)
- Landscaping (1)
- Landschaftsgestaltung (1)
- Laser (1)
- Leistungsfähigkeit (allg) (1)
- Luftfahrzeug (1)
- Maintenance (1)
- Manufacture (1)
- Material (constr) (1)
- Menschlicher Faktor (1)
- Menschlicher Körper (1)
- Method (1)
- Methode der finiten Elemente (1)
- Motorway (1)
- Nachhaltige Entwicklung (1)
- Naturalistic Driving (1)
- Naturalistic driving (1)
- Norm (tech) (1)
- Numerisches Modell (1)
- Oberbau (1)
- Oberflächentextur (1)
- Passive safety system (1)
- Passives Sicherheitssystem (1)
- Pavement (1)
- Pavement Management System (1)
- Pavement management system (1)
- Permeability (1)
- Policy (1)
- Politik (1)
- Prevention (1)
- Quality assurance (1)
- Qualitätssicherung (1)
- Recycling (1)
- Recycling (mater) (1)
- Reflectorized material (1)
- Reflexstoffe (1)
- Reinforcement (in mater) (1)
- Remote control (1)
- Repair (1)
- Richtlinien (1)
- Rillenherstellung (1)
- Risiko (1)
- Risk (1)
- Rissbildung (1)
- Road network (1)
- Road weather conditions (1)
- Roadside (1)
- Robot (1)
- Roboter (1)
- Rock (1)
- Rolling resistance (1)
- Rollwiderstand (1)
- Sachschaden (1)
- Schweregrad (Unfall, Verletzung) (1)
- Seepage (1)
- Severity (accid, injury) (1)
- Sickerung (1)
- Slope (terrain) (1)
- Soil stabilization (1)
- Spannung (mater) (1)
- Specification (standard) (1)
- Specifications (1)
- Staggered junction (1)
- Standardisierung (1)
- Standardization (1)
- Stapedius reflex (1)
- Stapediusreflex (1)
- Statistical analysis (1)
- Statistics (1)
- Statistik (1)
- Statistische Analyse (1)
- Steifigkeit (1)
- Stiffness (1)
- Straßennetz (1)
- Straßenseitenfläche (1)
- Stress (in material) (1)
- Surface texture (1)
- Surveillance (1)
- Sustainability (1)
- Technische Überwachung (allg) (1)
- Tragfähigkeit (1)
- Turning (1)
- Tödlicher Unfall (1)
- Umweltverträglichkeitsprüfung (1)
- Unfalldaten (1)
- Unfallhäufigkeit (1)
- Unterhaltung (1)
- Verfahren (1)
- Verhalten (1)
- Verhütung (1)
- Versetzte Kreuzung (1)
- Verständnis (1)
- Verstärkung (Brücke) (1)
- Warning (1)
- Wasser (1)
- Water (1)
- Wildschutzzaun (1)
- Wirksamkeitsuntersuchung (1)
- Witterungsbedingungen (Straße) (1)
- Zustandsbwertung (1)
Institut
Rekonstruktion des Bestandsplans im Zuge der Nachrechnung der Brücke über die Leine bei Schwarmstedt
(2019)
Der aktuell im Rahmen der Nachrechnungsrichtlinie geforderte Nachweis von Tragfähigkeit, Gebrauchstauglichkeit und Ermüdung der Brückenbauwerke im Bestand der Länder und des Bundes stellt eine enorme Herausforderung dar. Insbesondere bei unvollständigen oder fehlenden Bestandsplänen der Bauwerke sind Maßnahmen erforderlich, um die erforderlichen Informationen zu beschaffen. Ein wirkgungsvolles Instrument könne hierfür die zerstörungsfreien Prüfverfahren des Bauwesens sein. In dem präsentierten Forschungsprojekt erfolgte die Rekonstruktion eines Bestandsplanes direkt auf die Anforderungen des mit der Nachrechnung beauftragten Ingenieurbüros. Darüber hinaus wurde der Entwurf eines Leitfadens erstellt, der im Falle von unvollständigen oder fehlenden Bestandsplänen die Grundlagen für die Beauftragung und Durchführung der Nachrechnung schafft.
The Netherlands is on the way to change its existing skid resistance measuring method for its highway network from the Dutch RAW 72, a longitudinal force method, to the Sideway Force method. This method is described in the Technical Specification 15901-8 (SKM device) as well as 15901-6 (SCRIM device) and is in use in 9 European countries. The CEN TC 227 WG5 on Surface Characteristics is currently working on combining of these two technical Specifications into a European standard for Sideway-Force (SWF) measurement devices. The idea of this change in the Netherlands was perceived in 2013 and since then a lot of meetings have been held with the different Dutch decision makers as well as with countries which currently operate SWF devices. There was an intensive exchange of knowledge about these devices and their corresponding quality assurance systems, because the Netherlands wanted to incorporate and rely on an existing system of a neighbor country without losing their present level of quality. The Netherlands has therefore decided to incorporate the German SKM approach. The network monitoring with the new system will start in 2017. To ensure the quality of skid resistance measurements and further cooperation in this field, it has been decided to initiate an alliance between BASt and the Dutch road owner Rijkswaterstaat (RWS). This alliance will facilitate an exchange of research activities, calibration of the Dutch systems according to the existing German Standard as well as control measurements with a BASt-device on the Dutch network during the network monitoring. During 2016 also comparative measurements will be performed on a network level with the current Dutch device and with an SKM device to determine a conversion between the two and to be able to define new threshold values.
Neue Herausforderungen an die Unfallforschung durch Fahrerassistenz und automatisiertes Fahren
(2019)
Unfallrekonstruktion hat die Ableitung von Maßnahmen zur Minimierung der Unfallfolgen ermöglicht, vor allem durch Verbesserungen bei passiven Sicherheitseinrichtungen, aber auch durch die Verbesserung der Rettungskette, beispielsweise eCall. Heute können aktive Sicherheitssysteme die Unfallfolgen bereits vor der eigentlichen Kollision reduzieren oder durch Umfeldwahrnehmung und mittels Eingriff in die Fahrzeugsteuerung gegebenenfalls sogar vollständig verhindern. Funktionen, die aktiv in die Fahrzeugsteuerung eingreifen, lassen sich nach ihrer Wirkweise unterscheiden: zum einen handelt es sich um kontinuierlich automatisierende Funktionen, die meist länger aktiv bleiben (zum Beispiel ACC). Zum anderen um Funktionen, die in kritischen Fahrsituationen temporär in die Fahrzeugsteuerung eingreifen. Aufgezeigt wird, welche Konsequenzen und Risiken in Bezug auf diese Systeme sowie für bestimmte (zum Beispiel kritikale) Fahrsituationen anzunehmen sind. Zur Bewertung von aktiven Reglern, die in kritischen Fahrsituationen eingreifen, sind Unfalldaten nur noch eingeschränkt tauglich. Ähnliches gilt für die Bewertung von Ereignissen/ Zuständen im Rahmen kontinuierlicher Fahrzeugsteuerung, vor allem, wenn diese weiter vorausliegen. Wirkzusammenhänge automatisierter Fahrfunktionen müssen jedoch - gerade für den Mischverkehr mit konventionell gesteuerten Fahrzeugen - identifiziert werden. Dafür wird eine Szenariendatenbank mit relevanten Verkehrssituationen benötigt, in die Daten aus Naturalistic Driving Studies (NDS), aus Fahrversuchen oder Versuchen im Fahrsimulator eingehen können. Die zunehmende Durchdringung der Fahrzeugflotte mit kontinuierlich automatisierten Fahrfunktionen lässt eine Abnahme kritischer Fahrsituationen und eine Reduktion der Zahl der Verkehrsopfer erwarten. Allerdings verbleibt eine Restzahl an systemimmanenten Unfällen, die als unvermeidbar gelten müssen.
Innovative Zugangstechniken und digitale Bildauswertung für die Bauwerksprüfung im Zuge von Straßen
(2019)
Deutschland braucht ein zuverlässiges Straßenverkehrssystem. Dafür müssen die Zustände der Brücken und sonstigen Ingenieurbauwerke der Straßen kontinuierlich und umfassend bekannt um rechtzeitig handeln zu können. Neben der regulären visuellen Bauwerksprüfung nach DIN 1076 bieten neue innovative Verfahren große Möglichkeiten der Zugangs- sowie Bilderfassungs- und Bildverarbeitungstechnik. Diese Möglichkeiten gilt es jetzt systematisch zu erkunden und für den Einsatz aufzubereiten
To assess occupant safety in a crash test, criteria associating the measurements made with a crash test dummy to injury risk are necessary. To enable better protection of elderly car occupants the objective of this study was to develop improved thoracic injury criteria for the THOR average male dummy. The development of these criteria is usually based on matched dummy and Post Mortem Human Surrogate (PMHS) tests by relating the obtained PMHS injuries to dummy measurements. This approach is limited, since only a few tests in relevant loading conditions are available and any new test series requires high efforts to be performed due to their complexity and costs. To overcome these limitations and to extend the dataset for the development of THOR dummy chest injury risk functions a simulation-based approach was applied within the EC funded project SENIORS (Safety Enhanced Innovations For older Road Users - www.seniors-project.eu). Within this study frontal impact sled simulations with an FE model representing a THOR average male dummy and matched simulations with a human body model (HBM) representing an elderly car occupant were carried out. The HBM used for this study was the THUMS TUC with modified rib cage, which was developed in SENIORS. The modifications included material and geometry changes aiming to represent an elderly car occupant. The rib fracture risk was predicted with a deterministic approach whereby a rib was considered broken when the strain exceeded an age-dependent threshold. Furthermore, a probabilistic method was applied to predict the probability of sustaining a certain number of fractured ribs by comparing local strain values to the distribution of cortical rib ultimate strain. By relating the output from the HBM simulations to a multi-point dummy injury criterion, injury risk curves were calculated by statistical methods. The wide range of loading conditions resulted in the desired range of injuries and THOR ATD output. The number of fractured ribs predicted by the HBM based on the deterministic prediction method was between 0 and 15. Furthermore, the probabilistic risk for the number of rib fractures equal or greater than two, three or four was calculated for each load case. The THOR rib deflection criterion Rmax was between 18 and 56 mm, while the PC Score was in the range of 2.5 to 7.2. Based on these outputs new risk curves for the predicted deterministic (AIS2+/3+) and probabilistic injury risk were calculated. The new curves show reasonable shapes and significance that provide trust in their application. The new risk curves are compared to risk curves obtained by traditional methods. The results were found similar to previous injury risk functions based on physical tests, which gives a high level of confidence in the chosen approach. The simulation-based approach of matched ATD model vs. HBM simulation was successfully applied. Rmax curves show a slightly better quality than the injury criterion PC Score.
Mobility is a central requirement for economic growth, employment and participation of each individual in social life. This basic principle of the BMVI (Federal Ministry of Transport and Digital Infrastructure) requires an intact and functional infrastructure. In a context of increasing investments over the next few years, it will be relevant to develop a network related systematic procedure to be part of the structural maintenance of the federal highway network. In the planning of maintenance measures, the knowledge about the state of structural performance and its long-term development is of central importance. In the following, a method is presented which allows the mechanically and statistically reliable assessment and prognosis of structural performance of concrete pavements. In addition, the application and procedure are applied to a case study.
Ein auf Nachhaltigkeit angelegtes Großprojekt wie das der Zustandserfassung und -bewertung (ZEB) bedarf eines Qualitätssicherungssystems. Hierfür wurde auf Initiative des Bundesministeriums für Verkehr, Bau- und Wohnungswesen (BMVBW) eine Untersuchung ausgelöst, über die die Grundlagen und Voraussetzungen für ein umfassendes QS-System erarbeitet werden sollen. In einer Pilotierungsphase soll im Jahr 2002 die Machbarkeit nachgewiesen werden.
In Germany, expenditure for the construction of new and maintenance of existing federal highways is currently at a record level of EUR 8 billion per year. In connection with the planned infrastructure policy reforms it is necessary to further develop the planning tools for dimensioning and substance assessment of road structures in order to increase the efficiency of construction measures. The stress caused by traffic is of central importance here. Since unevenness in the road surface has a significant influence on the dynamic part of the wheel load, dynamic effects must be explicitly taken into account. As a result, increasing unevenness can lead to higher dynamic loads and, in the context of a corresponding number of wheel rollovers, to disproportionate damage to the road structure. In general, a shock factor is taken into account during dimensioning, which is to be considered as a function of vehicle suspension, load, speed and evenness. This approach is not sufficient for concrete road structures executed as slabs. In the normal case, only the periodically occurring individual event of a transverse contraction joint, superimposed by irreversible and/or temporary slab deformations, can lead to a significant increase in the dynamic wheel load. In addition, the existing slab deformations are tied to many boundary conditions and can therefore vary greatly in their characteristics. For the further development of methods for dimensioning and residual substance assessment with regard to their accuracy, a three-dimensional slab-specific view of the road surface is therefore appropriate. In this paper, a suitable measuring method for three-dimensional surface laser scanning and an algorithm for the classification of slab deformations are presented.
Knowledge of material properties is of great importance when developing new types of concrete and construction methods for road building, and for quality control and quality assurance. Physical material characteristics are likewise the basis for dimensioning and assessing the residual substance of concrete pavements. One relevant characteristic when examining thermally induced stress and deformation is the coefficient of thermal expansion (CTE) of concrete. This indicator, for example, significantly influences the longitudinal expansion of the pavement system as well as the degree of curling of slabs and joint movements. Extensive tests were conducted during the technical engineering assessment of the structural substance of concrete pavements in the German motorway network, including tests to determine the CTE of existing types of concrete. Because no standardised procedure currently exists in Germany for using tests to determine the CTE of concrete, the initial task was to develop a suitable test procedure from a road-building perspective, taking consideration of the national prevailing structural conditions. This article presents the results of selected status analyses, in which the CTE was determined for a total of 656 individual samples. The values calculated for the top and bottom drilled core layer are in the range 8.9 – 13.2 x 10-6/K, whereby the average CTE assumes a value of 10.7 x 10-6/K. The deviations of the CTEs from the bottom and top drilled core layer are in principle significantly below the limitation to a maximum of 2.50 x 10-6/K recommended in literature.
Zunehmende Belastungen insbesondere der Bundesstraßen durch Schwerverkehr und Witterungsextreme führen dazu, dass viele Straßenabschnitte vor Ablauf der geplanten Nutzungsdauer erneuert werden müssen. Hinzu kommt die Herausforderung der Beseitigung von Investitionsstaus, das heißt die Erneuerung von Straßenabschnitten, deren substanzieller Zustand durch Überschreiten der geplanten Nutzungsdauer nicht mehr wirtschaftlich ist. Insbesondere bei extremen Witterungsbedingungen zeigen sich unter Umständen die Schwächen der verschiedenen Bauweisen. So kann es bei hohen Temperaturen und Stop-and-go-Verkehr bei Asphaltbauweisen zur erhöhten Spurrinnenbildung oder zur Schädigung der Längsnähte kommen. In der Betonbauweise können unter Umständen Hitzeschäden auftreten, wenn größere Imperfektionen – die direkt aus der Herstellung oder mangelnder/fehlerhafter Erhaltung resultieren – vorliegen. Aufgrund außergewöhnlicher klimatischer Situationen (Hitzeperioden) im Jahr 2013 kam es insbesondere im Bundesland Bayern zu einem vermehrten Auftreten von Hitzeschäden. Deshalb wurde im gleichen Jahr eine „Expertengruppe Hitzeschäden“ gegründet, die aus Vertretern des BMVI, der BASt, der Straßenbauverwaltungen und externer Experten bestand. Ziel war es, die Ursachen und Mechanismen von Hitzeschäden zu eruieren, um geeignete Maßnahmen zu deren Vermeidung ergreifen zu können. In diesem Zusammenhang wurde eine spezielle Messstation entwickelt, um die Temperatur über den Betondeckenquerschnitt, die Fugenbewegungen und weitere relevante Klimadaten ermitteln zu können. In enger Zusammenarbeit mit dem Bund und den Ländern wurden bisher 15 derartige Stationen aufgebaut. Somit besteht die Möglichkeit, in der Praxis auftretende witterungsinduzierte Spannungszustände im Kontext mit den verschiedenen Bauweisen sowie den zunehmend auftretenden Witterungsextrema zu analysieren. Die genaue Kenntnis über den Temperaturverlauf im Betonquerschnitt und zur Fugenbewegung, im zeitlichen und örtlichen Kontext zu den Witterungsbedingungen ist notwendig, um das Spannungsniveau im Deckensystem ableiten und prognostizieren zu können. Zudem ist die Kenntnis über konstruktive und materialtechnische Parameter aus dem zu betrachtenden Straßenoberbau erforderlich. Um Aussagen zur zeitlichen Entwicklung des Verhaltens des Plattensystems im Lebenszyklus treffen zu können, ist die kontinuierliche Erfassung, Speicherung und Analyse relevanter Daten von Bedeutung. Für die temporäre Spannungsprognose (z. B. über den Zeitraum einer Hitzeperiode) ist jedoch eine Analyse der Ausgangsdaten innerhalb weniger Stunden notwendig, um entsprechende Handlungsempfehlungen (z. B. Einrichtung von Tempolimits) treffen zu können. Durch die Verknüpfung mit weiteren Daten können ferner Aussagen zur Entwicklung wichtiger zeitlich veränderlicher Parameter über den Nutzungszeitraum gewonnen werden.