Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (62)
- Buch (Monographie) (41)
- Wissenschaftlicher Artikel (12)
- Teil eines Buches (Kapitel) (2)
- Bericht (2)
Schlagworte
- Simulation (119) (entfernen)
Ziel des Projektes war es, bedingt durch die wachsende Anzahl der im Verkehr befindlichen elektrisch und hybrid-elektrisch betriebenen Fahrzeuge, notwendige Anpassungen der periodisch technischen Überwachung zu erarbeiten. Dazu wurden von verschiedenen Fahrzeugen die relevanten Bauteile des elektrischen Antriebsstrangs identifiziert und deren Ausfallverhalten analysiert. Um die Degradationsauswirkungen einzelner Bauteile und Funktionen auf das gesamte System bestimmen zu können, hat die FSD ein Simulationsmodell erstellt. Die daraus ermittelten Ergebnisse waren Grundlage für die Bestimmung verkehrssicherheits- und umweltkritischer Bauteile sowie deren Funktionen. Diese Modellaussagen wurden mit Realversuchen an Fahrzeugen validiert. Zusätzlich konnten in einem Feldversuch 2.560 Fahrzeuge mit elektrischem Antriebsstrang untersucht werden. Aus diesen Ergebnissen lassen sich Änderungsvorschläge für die Untersuchungen und Vorgaben ableiten. Dafür ist für einen Großteil dieser Untersuchungen die Nutzung von Diagnosedaten eine geeignete Möglichkeit. Die 47. Verordnung zur Änderung straßenverkehrsrechtlicher Vorschriften berücksichtigt bereits an vielen Stellen die neuen Antriebskonzepte. Von daher werden lediglich geringe Anpassungen in der StVZO für -§ 19 und den Beispielkatalog dazu, -§ 29, Anlage VIIIa, Anlage VIIId sowie die HU-Richtlinie vorgeschlagen. Für die Durchführung der Untersuchungspunkte zum HV-System ist die Entwicklung einer Hochvolt-Richtlinie empfehlenswert. Einige wichtige Prüfverfahren lassen sich derzeit technisch noch nicht umsetzen. Dazu sind Änderungen der internationalen Bau- und Betriebsvorschriften notwendig. Diese werden bei der EU/UNECE anzuregen sein. Es besteht über dieses Projekt hinaus weiterhin Forschungsbedarf, um sich intensiv mit diesen Fahrzeugen zu befassen und deren Weiterentwicklung zu beobachten, damit notwendige Auswirkungen auf die PTI rechtzeitig erkannt werden können.
Ziel der Untersuchung war es, anhand realer Fälle adaptive Steuerungen von Lichtsignalanlagen für städtische Hauptverkehrsstraßen mit konventionellen Steuerungen zu vergleichen. Für die Untersuchung wurden je zwei Hauptverkehrsstraßen in Münster und Remscheid ausgesucht, auf denen adaptive Steuerungen eingerichtet wurden. Dabei wurde zunächst eine konventionelle Koordinierung mit weitgehend verkehrsabhängigen Elementen hergestellt. Zusätzlich konnte jeweils eine adaptive Steuerung geschaltet werden. Auf allen Strecken wurden systematisch Testfahrten bei Schaltung der verschiedenen Steuerungszustände durchgeführt. Die hierbei mittels GPS aufgezeichneten Fahrzeugtrajektorien wurden hinsichtlich der Anzahl von Halten und der Wartezeiten analysiert, um so zu einer verkehrstechnischen Beurteilung zu gelangen. Auf der ersten Teststrecke in Münster konnte durch die adaptive Steuerung eine deutliche Verbesserung des Verkehrsablaufs erreicht werden. Auf der zweiten Teststrecke in Münster ließ sich dieser Erfolg nicht wiederholen. Es traten teilweise erhebliche verkehrliche Verschlechterungen bei Schaltung der adaptiven Steuerung ein. Auf den Teststrecken in Remscheid ergaben sich durch die adaptive Steuerung in jeweils einer Fahrtrichtung Verbesserungen des Verkehrsflusses. Dem stehen jedoch Verschlechterungen in der Gegenrichtung gegenüber. Weil eine direkte Erfassung der Immissionen vor Ort nicht möglich war, wurde eine Antwort hinsichtlich der ökologischen Wirkungen durch mikroskopische Simulation gesucht. Für je eine Strecke in Münster und Remscheid wurde die adaptive Steuerung in ein VISSIM-Modell integriert. Die simulierten Fahrzeugtrajektorien wurden durch das Verfahren PHEM im Hinblick auf die Schätzung der Emissionen analysiert. Dabei zeigte sich in Münster eine leichte Verbesserung (1,0 %) der ökologischen Auswirkungen als Folge der adaptiven Steuerung. In Remscheid zeigte sich nach den eingetretenen ungünstigen verkehrlichen Wirkungen erwartungsgemäß auch eine Verschlechterung der ökologischen Auswirkungen. Die Ergebnisse der mikroskopischen Simulation in Verbindung mit der adaptiven Steuerung auf diesem Streckenzug unterlagen jedoch erheblichen Schwankungen, sodass hiermit lediglich tendenzielle Aussagen möglich sind. Im Ergebnis zeigte sich, dass die adaptiven Verfahren die Möglichkeit eröffnen, den Verkehrsfluss auf städtischen Hauptverkehrsstraßen zu verflüssigen. Dabei können auch Verbesserungen hinsichtlich der Schadstoffemissionen und des Energieverbrauchs eintreten. Diese Verbesserungen können jedoch nicht uneingeschränkt vorausgesetzt werden, sondern bedürfen einer zum Teil längerfristigen, kostenintensiven Einstellungsphase.
The head impact of pedestrians in the windscreen area shows a high relevance in real-world accidents. Nevertheless, there are neither biomechanical limits nor elaborated testing procedures available. Furthermore, the development of deployable protection systems like pop-up bonnets or external airbags has made faster progress than the corresponding testing methods. New requirements which are currently not considered are taken into account within a research project of BASt and the EC funded APROSYS (Advanced PROtection SYStems) integrated project relating to passive pedestrian protection. Testing procedures for head impact in the windscreen area should address these new boundary conditions. The presented modular procedure combines the advantages of virtual testing, including full-scale multi-body and finite element simulations, as well as hardware testing containing impactor tests based on the existing procedures of EEVC WG 17. To meet the efforts of harmonization in legislation, it refers to the Global Technical Regulation of UNECE (GTR No. 9). The basis for this combined hardware and virtual testing procedure is a robust categorization covering all passenger cars and light commercial vehicles and defining the testing zone including the related kinematics. The virtual testing part supports also the choice of the impact points for the hardware test and determines head impact timing for testing deployable systems. The assessment of the neck rotation angle and sharp edge contact in the rear gap of pop-up bonnets is included. For the demonstration of this procedure, a hardware sedan shaped vehicle was modified by integrating an airbag system. In addition, tests with the Honda Polar-II Dummy were performed for an evaluation of the new testing procedure. Comparing these results, it was concluded that a combination of simulation and updated subsystem tests forms an important step towards enhanced future pedestrian safety systems considering the windscreen area and the deployable systems.
In the last years there has been a decline in accident figures in Germany especially for four wheeled vehicles. At the same time, accident figures for motorcycles remained nearly constant. About 17 % of road traffic fatalities in the year 2006 were motorcyclists. 33 % of these riders were killed in single vehicle crashes. This leads to the conclusion that improving driving dynamics and driving stability of powered two wheelers would yield considerable safety gains. However, the well-known measures for cars and trucks with their proven effectiveness cannot be transferred easily to motorcycles. Therefore studies were carried out to examine the safety potential of Anti Lock Braking Systems (ABS) and Vehicle Stability Control (VSC) for motorcycles by means of accident analysis, driving tests and economical as well as technical assessment of the systems. With regard to ABS, test persons were assigned braking tasks (straight and in-curve) with five different brake systems with and without ABS. Stopping distances as well as stress and strain on the riders were measured for 9 test riders who completed 105 braking manoeuvres each. Knowing the ability of ABS to avoid falls during braking in advance of a crash and taking into account the system costs, a cost benefit analysis for ABS for motorcycles was carried out for different market penetration of ABS, i.e. equipment rates, and different time horizons. The potential of VSC for motorcycles was estimated in two steps. First the kinds of accidents that could be prevented by such a system at all have been analysed. For these accident configurations, simulations and driving tests were then performed to determine if a VSC was able to detect the critical driving situation and if it was technically possible to implement an actuator which would help to stabilise the critical situation.
Accident research 2.0: New methods for representative evaluation of integral safety in traffic
(2013)
BMW has developed a procedure for rating Advanced Driver Assistance Systems (ADAS) benefits that integrates two distinct tools. The tool "S.A.F.E.R." is designed to analyze the pre-crash phase. The aim of S.A.F.E.R. is to simulate all relevant processes in sufficient detail to obtain reproducible estimates of key indicators (effectiveness, false positives, etc.). The relevant processes include not only traffic and vehicle dynamics, but also environmental and most importantly human factors. Representative distributions of factors and parameters are obtained by taking the stochastic variation of all relevant parameters into account in the simulations. The second tool, known as "ICOS", has been designed to provide a high-resolution, high-fidelity description of crash phase dynamics. If one converts the outputs of stochastic simulation into inputs for crash dynamics, the result is a comprehensive description of exactly how a safety system can reduce injuries. Applications currently focus on high-fidelity simulation of individual crashes in order to enhance our understanding and optimization of connected safety systems. An integrated simulation process thus allows an exact prediction of the effectiveness in individual cases in terms of injury severity. The development and rating of integral safety need to reflect the true efficiency in the field. The integrated approach described here could provide a valid and reproducible basis for rating connected systems of active and passive safety. In particular, "virtual experiments" using a traffic-based approach and incorporating models of all relevant processes constitute an essential element of the approach.
The presentation deals with the simulation tool rateEFFECT which intends to answer the following questions: Which active safety systems should be developed to maximize safety benefit in real traffic accidents? What is the effectiveness of a specific active safety system in the real world? How many casualties could be avoided by such a system? It is shown that a lot of information is required to simulate existing accidents in order to estimate ADAS effects. This particularly includes numerical values for the pre-crash and in-crash phase. The database GIDAS provides a required minimum number of these parameters for a statistically significant sample.
The paper aims to study the injury risk and kinematics of pedestrians involved in different passenger vehicle collisions. Furthermore, the difference of pedestrian kinematics in the accidents involved minivan and sedan was analyzed. The 18 sample cases of passenger car to pedestrian collisions were selected from the database of In-depth Investigation of Vehicle Accident in Changsha of China (IVAC),of which the 12 pedestrian accidents involved in a minivan impact for each case, and the 6 accidents in a sedan impact for each. The selected cases were reconstructed by using mathematical models of pedestrians and accident vehicles in a multi-body dynamic code MADYMO environment. The logistic regression models of the risks for pedestrian AIS 3+ injuries and fatalities were developed in terms of vehicle impact speed by analyzing the minivan-pedestrian and sedan-pedestrian accidents. The difference of pedestrian kinematics was identified by comparing the results from reconstructed pedestrian accidents between the minivans and sedans collisions. The result shows that there is a significant correlation among the impact speed and the severity of pedestrian injuries. The minivan poses greater risk to pedestrian than sedan at the same impact speed. The kinematics of pedestrian was greatly influenced by vehicle front shape.
The number of road accidents in Portugal has decreased significantly in the last decades, however, this tendency is not similar in all types of transportation. In the most recent years and by European standards, Portugal is still one of the leading countries concerning the number of fatalities in Powered Two Wheelers (PTW) accidents. To this effect, the in-depth investigation of PTW accidents is crucial and so, a thorough statistical analysis concerning the main factors influencing PTW riders injury severity accidents was undertaken regarding the 2007-2010 period in the National Road Safety Authority (ANSR) injured riders database using the software SPSS. In addition, to determine the importance of absent factors in the database analysis, such as velocity, a set of 53 real accidents involving PTW were also investigated and computationally reconstructed using the software PC-Crash. Lateral collisions between a motorcycle, its rider and the side of three different passenger cars were also simulated, varying the motorcycle impact angle and velocity in order to estimate the PTW deformation energy and the rider- injuries, as this accident configuration stands out in terms of frequency and even severity. The results of this detailed study are presented.
Real world accident reconstruction with the Total Human Model for Safety (THUMS) in Pam-Crash
(2013)
Further improvement of vehicle safety needs detailed analysis of real world accidents. According to GIDAS (German In-Depth Accident Study) most car to car front accidents occur at mid-crash severity. In this range thoracic injuries already occur. In this study a real world frontal crash with mid-crash severity out of the AARU database was reconstructed. The selected car to car accident was reconstructed by AARU by means of pc-crash software in order to get the initial dynamic accident conditions. These initial conditions were used to reconstruct the complete accident in more detail using FE models for the car structure and the occupants. Occupant simulations were performed with FE HIII-dummy models and the THUMS using Pam-Crash code. An initial THUMS validation was performed in order to verify the model-´s biofidelity by means of table-top test simulations. THUMS bone stiffness values were modified to match the real word occupant age. A comparison between driver and passenger restraint system loading was done, as well as an injury prediction comparison between the HIII-dummy model and THUMS response for both cases. Detailed comparison between the HIII-dummy models and THUMS regarding thoracic loading are discussed.
The main objective of EC CASPER research project is to reduce fatalities and injuries of children travelling in cars. Accidents involving children were investigated, modelling of human being and tools for dummies were advanced, a survey for the diagnosis of child safety was carried out and demands and applications were analysed. From the many research tasks of the CASPER project, the intention of this paper is to address the following: • In-depth investigation of accidents and accident reconstruction. These will provide important points for the injury risk curve, in order to improve it. Different accident investigation teams collected data from real road accidents, involving child car passengers, in five different European countries. Then, a selection of the most appropriate cases for the injury risk curve and the purposes of the project was made for an in-depth analysis. The final stage of this analysis was to conduct an accident reconstruction to validate the results obtained. The in-depth analysis included on-scene accident investigation, creating virtual simulations of the accident/possible reconstruction, and conducting the reconstruction. In the cases of successful reconstructions, new points were introduced to the injury risk curves. Accident reconstructions of selected cases were carried out in test laboratories as the next step following in-depth road accident investigation. These cases were reconstructed using similar child restraint systems (CRS) and the same type make and model as in the real accidents. Reconstructing real cases has several limitations, such as crash angle, cars" approximation paths and crash speed. However, a few changes and applications on the testing conditions were applied to reduce the limitations and improved the representations of the real accidents. After conducting the reconstructions, a comparison between the deformations of the cars on the real accident and the vehicles from the reconstructions was made. Additionally, a correlation between the data captured from the dummies and the injury data from the real accident was sought. This finalises an in-depth analysis of the accident, which will provide new relevant points to the injury risk curve. The CASPER project conducted a large research programme on child safety. On technical points, a promising research area is the developing injury risk curves as a result of in-depth accident investigations and reconstructions. This abstract was written whilst the project was not yet finished and final results are not yet known, but they will be available by the time of the conference. All the works and findings will not necessarily be integrated in the industrial versions of evaluation tools as the CASPER project is a research program.