Konferenzveröffentlichung
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (637) (entfernen)
Schlagworte
- Conference (386)
- Konferenz (382)
- Germany (212)
- Deutschland (209)
- Unfall (188)
- Accident (187)
- Safety (123)
- Sicherheit (122)
- Injury (117)
- Verletzung (117)
Institut
The use of proper child restraint systems (CRS) is mandatory for children travelling in cars in most countries of the world. The analysis of the quantity of restrained children shows that more than 90% of the children in Germany are restrained. Looking at the quality of the protection, a large discrepancy between restrained and well protected children can be seen. Two out of three children in Germany are not properly restrained. In addition, considerable difference exists with respect to the technical performance of CRS. For that reason investigations and optimisations on two different topics are necessary: The technical improvement of CRS and the ease of use of CRS. Consideration of the knowledge gained by the comparison of different CRS in crash tests would lead to some improvements of the CRS. But improvement of child safety is not only a technical issue. People should use CRS in the correct way. Misuse and incorrect handling could lead to less safety than correct usage of a poor CRS. For that reason new technical issues are necessary to improve the child safety AND the ease of use. Only the combination of both parts can significantly increase child safety. For the assessment of the safety level of common CRS, frontal and lateral sled tests simulating different severity levels were conducted comparing pairs of CRS which were felt to be good and CRS which were felt to be poor. The safety of some CRS is currently at a high level. All well known products were not damaged in the performed tests. The performance of non-branded CRS was mostly worse than that of the well known products. Although the branded child restraint systems already show a high safety level it is still possible to further improve their technical performance as demonstrated with a baby shell and a harness type CRS.
Die Verkehrssicherheit in Deutschland konnte in den letzten Jahrzehnten durch zahlreiche Verbesserungen sowohl im Bereich der Fahrzeugtechnik, der Fahrausbildung als auch der Straßeninfrastruktur deutlich verbessert werden. Wurden im Jahr 1970 noch über 21.000 Menschen im Straßenverkehr getötet, so waren es im Jahr 2008 weniger als 4.500, und dies, obwohl in diesem Zeitraum eine Verdreifachung der Verkehrsleistung festzustellen ist. Um diese positive Entwicklung auch zukünftig durch Straßeninfrastrukturmaßnahmen zu unterstützen, wurden und werden Verfahren zur Berücksichtigung von Aspekten der Verkehrssicherheit im Zuge der Planung, des Entwurfs und des Betriebs von Straßen entwickelt bzw. weiterentwickelt. Zu nennen ist hier z.B. die Fortschreibung des Verfahrens zur Wirtschaftlichkeitsbewertung, die Einführung des Sicherheitsaudits, die Erarbeitung des Merkblatts für die Durchführung von Verkehrsschauen sowie die Erarbeitung des Handbuches für die Bewertung der Verkehrssicherheit. Analysen des Unfallgeschehens unter Berücksichtigung von Straßeninfrastrukturmerkmalen haben auch wichtige Grundlagen für die im Entwurf vorliegende Richtlinie für die Anlage von Landstraßen beigesteuert. Dass hier Verbesserungen besonders dringlich sind, wird anhand einer Analyse des Unfallgeschehens differenziert nach der Ortslage deutlich. Seit eineinhalb Jahrzehnten liegt der Anteil der auf Landstraßen im Straßenverkehr Getöteten bei mehr als 60%. Dabei sind Maßnahmen zur Reduzierung von Fahrunfällen, wie z.B. die Einhaltung der Radienrelation und eine ausreichende Querneigung, von besonderer Bedeutung, da dieser Unfalltyp einen Anteil von fast 40% am gesamten Unfallgeschehen auf Landstraßen ausmacht. Maßnahmen zur Reduzierung von Unfällen im Längsverkehr, wie z.B. die Wahl von Querschnitten mit verkehrstechnisch gesicherten Überholmöglichkeiten, sind ebenfalls bedeutend, da dieser Unfalltyp einen Anteil von knapp 25% ausmacht. Von Bedeutung für die Verkehrssicherheit auf Landstraßen sind zudem die Gestaltung und die Verkehrsregelung im Bereich von Kreuzungen und Einmündungen. Dort ereignen sich gut ein Viertel aller Unfälle auf Landstraßen. Die Gestaltung von Seitenräumen ist für die Verkehrssicherheit auf Landstraßen ebenfalls von erheblicher Bedeutung. Allein der Anteil der bei Baumunfällen auf Landstraßen Getöteten beträgt fast 30%. Vor diesem Hintergrund wird die Bedeutung von Schutzeinrichtungen dort, wo feste Hindernisse unvermeidbar sind, deutlich. Gerade im Kontext mit Schutzeinrichtungen ist die Verkehrssicherheit für Motorradfahrer relevant. Im Merkblatt für die Verbesserung der Verkehrssicherheit auf Motorradstrecken sind diesbezüglich bewährte Infrastrukturmaßnahmen angeführt.
Institute for Traffic Accident Research and Data Analysis <Tokyo>rnAbstract: Analyses were conducted to clarify the features of rear-end collisions, using an integrated accident database developed by the Institute for Traffic Accident Research and Data Analysis (ITARDA). Focusing on neck injuries in rear-end collisions, analyses were made of the relation to struck-vehicle properties. Regarding the relation to the initial year of registration, the results did not show that newer vehicles tended to have a lower no-neck-injury rate, which was defined in this study as an index. On the contrary, in some passenger car classes, it was observed that the no-neck-injury rate was higher in newer vehicles. The effect of an active head restraint system, which is one type of anti-whiplash device, was analyzed by using not only the no-neck-injury rate but also a regression analysis. The results showed that the effect of an active head restraint system on suppressing the incidence of neck injuries was statistically significant.rn
This study aimed at prediction of long bone fractures and assessment of lower extremity injury mechanisms in real world passenger car to pedestrian collision. For this purpose, two pedestrian accident cases with detail recorded lower limb injuries were reconstructed via combining MBS (Multi-body system) and FE (Finite element) methods. The code of PC Crash was used to determine the boundary conditions before collision, and then MBS models were used to reproduce the pedestrian kinematics and injuries during crash. Furthermore, a validated lower limb FE model was chosen to conduct reconstruction of injuries and prediction of long bone fracture via physical parameters of von Mises stress and bending moment. The injury outcomes from simulations were compared with hospital recorded injury data and the same long bone fracture patterns and positions can be observed. Moreover, the calculated long bone fracture tolerance corresponded to the outcome from cadaver tests. The result shows that FE model is capable to reproduce the dynamic injury process and is an effective tool to predict the risk of long bone fractures.
For the estimation of the benefit and effect of innovative Driver Assistance Systems (DAS) on the collision positions and by association on the accident severity, together with the economic benefit, it becomes necessary to simulate and evaluate a variety of virtual accidents with different start values (e.g. initial speed). Taken into account the effort necessary for a manual reconstruction, only an automated crash computation can be considered for this task. This paper explains the development of an automated crash computation based on GIDAS. The focus will be on the design of the virtual vehicle models, the method of the crash computation as well as exemplary applications of the automated crash computation. For the first time an automated crash computation of passenger car accidents has been realized. Using the automated crash computation different tasks within the field of vehicle safety can be elaborated. This includes, for example, the calculation of specific accident parameters (such as EES or delta-V) for various accident constellations and the estimation of the economic benefit of DAS using IRFs (Injury Risk Functions).
Unfortunately, there has been a high number of accident fatalities reported in the Czech Republic in recent years. There are many causes which have led to a growth in the number of road traffic accidents. Since 1990, traffic density has demonstrated an upward moving tendency, daily traffic-jams are on the increase in many cities and traffic capacity on roads and streets is not able to satisfy this increasing density. Moreover, many road users lack experience in terms of driving modern cars. The National Accident Study of the Czech Republic is based on the assumption that the year 2010 is considered as a pilot project with the testing operation of collecting and evaluating data from traffic accidents. From the beginning of 2011, a fully-functional structure of the Traffic Accident Research will be created and solid data generated. Based on this assumption, we hope to begin meaningful cooperation with foreign countries.
Mobility is a central requirement for economic growth, employment and participation of each individual in social life. This basic principle of the BMVI (Federal Ministry of Transport and Digital Infrastructure) requires an intact and functional infrastructure. In a context of increasing investments over the next few years, it will be relevant to develop a network related systematic procedure to be part of the structural maintenance of the federal highway network. In the planning of maintenance measures, the knowledge about the state of structural performance and its long-term development is of central importance. In the following, a method is presented which allows the mechanically and statistically reliable assessment and prognosis of structural performance of concrete pavements. In addition, the application and procedure are applied to a case study.
Zunehmende Belastungen insbesondere der Bundesstraßen durch Schwerverkehr und Witterungsextreme führen dazu, dass viele Straßenabschnitte vor Ablauf der geplanten Nutzungsdauer erneuert werden müssen. Hinzu kommt die Herausforderung der Beseitigung von Investitionsstaus, das heißt die Erneuerung von Straßenabschnitten, deren substanzieller Zustand durch Überschreiten der geplanten Nutzungsdauer nicht mehr wirtschaftlich ist. Insbesondere bei extremen Witterungsbedingungen zeigen sich unter Umständen die Schwächen der verschiedenen Bauweisen. So kann es bei hohen Temperaturen und Stop-and-go-Verkehr bei Asphaltbauweisen zur erhöhten Spurrinnenbildung oder zur Schädigung der Längsnähte kommen. In der Betonbauweise können unter Umständen Hitzeschäden auftreten, wenn größere Imperfektionen – die direkt aus der Herstellung oder mangelnder/fehlerhafter Erhaltung resultieren – vorliegen. Aufgrund außergewöhnlicher klimatischer Situationen (Hitzeperioden) im Jahr 2013 kam es insbesondere im Bundesland Bayern zu einem vermehrten Auftreten von Hitzeschäden. Deshalb wurde im gleichen Jahr eine „Expertengruppe Hitzeschäden“ gegründet, die aus Vertretern des BMVI, der BASt, der Straßenbauverwaltungen und externer Experten bestand. Ziel war es, die Ursachen und Mechanismen von Hitzeschäden zu eruieren, um geeignete Maßnahmen zu deren Vermeidung ergreifen zu können. In diesem Zusammenhang wurde eine spezielle Messstation entwickelt, um die Temperatur über den Betondeckenquerschnitt, die Fugenbewegungen und weitere relevante Klimadaten ermitteln zu können. In enger Zusammenarbeit mit dem Bund und den Ländern wurden bisher 15 derartige Stationen aufgebaut. Somit besteht die Möglichkeit, in der Praxis auftretende witterungsinduzierte Spannungszustände im Kontext mit den verschiedenen Bauweisen sowie den zunehmend auftretenden Witterungsextrema zu analysieren. Die genaue Kenntnis über den Temperaturverlauf im Betonquerschnitt und zur Fugenbewegung, im zeitlichen und örtlichen Kontext zu den Witterungsbedingungen ist notwendig, um das Spannungsniveau im Deckensystem ableiten und prognostizieren zu können. Zudem ist die Kenntnis über konstruktive und materialtechnische Parameter aus dem zu betrachtenden Straßenoberbau erforderlich. Um Aussagen zur zeitlichen Entwicklung des Verhaltens des Plattensystems im Lebenszyklus treffen zu können, ist die kontinuierliche Erfassung, Speicherung und Analyse relevanter Daten von Bedeutung. Für die temporäre Spannungsprognose (z. B. über den Zeitraum einer Hitzeperiode) ist jedoch eine Analyse der Ausgangsdaten innerhalb weniger Stunden notwendig, um entsprechende Handlungsempfehlungen (z. B. Einrichtung von Tempolimits) treffen zu können. Durch die Verknüpfung mit weiteren Daten können ferner Aussagen zur Entwicklung wichtiger zeitlich veränderlicher Parameter über den Nutzungszeitraum gewonnen werden.
Bus or heavy vehicle passenger accidents are rare events, compared with car accidents, but sometimes leads to a large number of victims especially in rollover crash scenarios. Two accidents occurred in Portugal in 2007 and 2013 in which 28 people died and more than 50 are injured, shown the importance of the investigation of such accidents. For the investigation of these accidents multidisciplinary teams are constituted with engineers and police officers. All the factors involved are taken into consideration including road design, traffic signs, maintenance and hardware, human factors, and vehicle factors. In this work a methodology to an accurate collection of the data is proposed. From the information collected the accident is reconstructed using the PC-CrashTM software. From this all the contribution factors are determined and recommendations to mitigate these crashes are listed. These two accidents are rollover accidents and the analysis of the injuries and its correlation with the use of retention systems is very important. From the medical data and with the dynamics of the accident determined simulations of the occupants with biomechanical models are carried out in order to evaluate the effect of the retention systems in the injuries. This analysis is based on injury criteria (such as Abbreviated Injury Score (AIS) or Injury Severity Scale (ISS)). With this it is possible to determine if the seat belt was worn or not.
At the 2005 ESV conference, the International Harmonisation of Research Activities (IHRA) side impact working group proposed a 4 part draft test procedure, to form the basis of harmonisation of regulation world-wide and to help advances in car occupant protection. This paper presents the work performed by a European Commission 6th framework project, called APROSYS, an further development and evaluation of the proposed procedure from a European perspective. The 4 parts of the proposed procedure are: - A Mobile Deformable Barrier test; - An oblique Pole side impact test; - Interior headform tests; - Side Out of Position (OOP) tests. Full scale test and modelling work to develop the Advanced European Mobile Deformable Barrier (AE-MDB) further is described, resulting in a recommendation to revise the barrier face to include a bumper beam element. An evaluation of oblique and perpendicular pole tests was made from tests and numerical simulations using ES-2 and WorldSID 50th percentile dummies. It was concluded that an oblique pole test is feasible but that a perpendicular test would be preferable for Europe. The interior headform test protocol was evaluated to assess its repeatability and reproducibility and to solve issues such as the head impact angle and limitation zones. Recommendations for updates to the test protocol are made. Out-of-position (OOP) tests applicable for the European situation were performed, which included additional tests with Child Restraint Systems (CRS) which use is mandatory in Europe. It was concluded that the proposed IHRA OOP tests do cover the worst case situations, but the current test protocol is not ready for regulatory use.