Proposal for a test procedure of assistance systems regarding preventive pedestrian protection
(2011)
This paper is showing a proposal for a test procedure regarding preventive pedestrian protection based on accident analysis. Over the past years pedestrian protection has become an increasing importance also during the development phase of new vehicles. After a phase of focusing on secondary safety, there are current activities to detect a possible collision by assistance systems. Such systems have the task to inform the driver and/or automatically activate the brakes. How practical is such a system? In which kind of traffic situations will it work? How is it possible to check the effectiveness of such a system? To test the effectiveness, currently there are no generally approved identifiable procedures. It is reasonable that such a test should be based on real accidents. The test procedure should be designed to test all systems, independent of the system- working principle. The vFSS group (advanced Forward-looking Safety Systems) was founded to develop a proposal for a technology independent test procedure, which reflects the real accident situation. This contribution is showing the results of vFSS. The developed test procedure focuses on accidents between passenger cars and pedestrians. The results are based on analysis results of in-depth databases of GIDAS, German insurers and DEKRA and added by analysis of national and international statistics. The in-depth analysis includes many pre-crash situations with several influencing factors. The factors are e. g. speed of the car, speed of the pedestrian, moving direction and a possible obscuration of the pedestrian by an object. The results comprise also the different situations of adults and children. Furthermore, they include details regarding influence of the lighting conditions (daylight or night) especially with respect to the accident consequences. In fact, more accidents happen at daylight, but fatal accidents are more often at night. A clustering of parameter combinations was found which represents typical accident scenarios. There are six typical accident scenarios which were merged in four test scenarios. The test scenarios are varying the starting position of the pedestrian, the pedestrian size (adult or child) and the speed of the pedestrian, whereas the speed of the car will not be varied. To ensure the independency from used sensing technologies it is necessary to use a suitable dummy. For example, if sensors are based on infrared, the dummy should emit the temperature of a human being. The test procedure will identify the collision speed as the key parameter for assessing the effectiveness of the tested system. The collision speed is defined as the reduction between initial test speed of the car and impact speed. The assessment of the speed reduction value regarding the safety benefit, however, will be part of a separate procedure.
The objective of the study is to measure the risk of pedestrian and bicyclist in urban traffic through an analysis of real-world accident data. The kinematics and injury mechanisms for both pedestrian and bicyclists are investigated to find the correlation of injury risks with injury related parameters. For this purpose, firstly 338 cases are selected as a sample from an IVAC accident database based on the In-depth Investigation of Vehicle Accident in Changsha of China. A statistic measurement of the fatality and serious injury risks with respect to impact speed was carried out by logistic regression analysis. Secondly, 12 pedestrian and 12 bicyclist accidents were further selected for reconstruction with MADYMO program. A comparative analysis was conducted based on the results from accident analysis and computer reconstructions for the injury risk, head impact conditions and dynamic response of pedestrians and bicyclists. The results indicate that bicyclists suffered lower risks of severe injuries and fatalities compared with pedestrians. The risks of AIS 3+ injury and fatality are 50% for pedestrians at impact speeds of 53.2 km/h and 63.3 km/h, respectively, while that for bicyclists at 62.5 km/h and 71.1 km/h, respectively. The findings could have a contribution to get a better understanding of pedestrians" and bicyclists" exposures in urban traffic in China, and provide background knowledge to generate strategies for pedestrian protection.
Vorgestellt werden Vorgehensweise, Datenaufbereitung, Modellaufbau und Ergebnisse des BASt-Projekts "Numerische Simulation der Stickoxidminderung durch photokatalytische Oberflächen an Verkehrswegen". Die Vorteile des Konzepts liegen in der Berücksichtigung von Zeitreihen (Eingangsdaten, Ausbreitungsrechnung) und in der Tatsache, dass die Depositionsgeschwindigkeit als zeitlich variable Eingangsgröße bei der Modellierung berücksichtigt wurde. Die Ergebnisse liegen entsprechend als Zeitreihen vor (Jahres- oder Tagesgänge können untersucht werden). Es ergab sich eine Minderung der NO2-Belastung um maximal knapp 1.5% im Nahbereich der Lärmschutzwand. Wesentlicher Faktor bei der Wirksamkeit photokatalytischer Oberflächen ist die Interaktion zwischen Gesamtbelastung und Depositionsgeschwindigkeit im Tagesverlauf.
Es wird über einen Kongress zur Gestaltung von Verkehrssicherheitskampagnen berichtet. Ziel dieses Kongresses war es, im europäischen Vergleich Stellenwert und Wirkung verschiedener Stilmittel und insbesondere die Vor- und Nachteile der Konfrontation als Instrument von Kampagnen herauszuarbeiten. Der Kongress bestätigte die verkehrspolitische These, dass es in der Verkehrssicherheitsarbeit keine für alle Staaten richtigen Konzepte für Erziehung und Aufklärung geben kann.
Das zweite Treffen der Koordinierungsstelle "Vernetzte Verkehrssicherheitsarbeit im Verkehrsverbund Rhein-Sieg" mit den örtlichen Kinderunfallkommissionen fand im September 2006 statt. Über 40 Teilnehmer vertraten die überwiegend aus Nordrhein-Westfalen kommenden Kommissionen. Schwerpunkt der Veranstaltung war das Thema "Schulweg- und Mobilitätspläne - Erfahrungen aus der Praxis". In drei Workshops wurden folgende Themen diskutiert: 1. Der Schulweg- und Mobilitätsplan als gemeinsame Aufgabe von Schule, Polizei, Gemeinde und Eltern; 2. Verkehrssicherheitsprobleme und wie man sie erkennen kann; 3. Gestaltungsmöglichkeiten der Pläne für Grund- und weiterführende Schulen und Überprüfung der Effektivität von Schulweg- und Mobilitätsplänen. In den Workshops berichteten Vertreter verschiedener Kinderunfallkommissionen über ihre Erfahrungen aus der Praxis bei der Erstellung der Pläne. Für die Verkehrssicherheitsanalyse verwiesen die Teilnehmer auf positive Erfahrungen mit der elektronischen Unfalltypensteckkarte. Die Erstellung von Schulweg- und Mobilitätsplänen könnte durch die Bereitstellung von Computerprogrammen sehr vereinfacht werden. Die Pläne selbst sollten in verschiedenen Formen zur Verfügung stehen: als Flyer, im Internet und als Poster. Die Abschlussdiskussion zeigte, dass bei der Erstellung von Schulweg- und Mobilitätsplänen noch viele Fragen zu klären sind. Zudem sollte grundsätzlich geklärt werden, welche Rahmenbedingungen geschaffen werden müssen, um die Arbeit der Kinderkommissionen zu fördern und zu unterstützen.
Angesprochen wurden aktuelle Entwicklungen beim Neubau und neue Entwicklungen bei Instandsetzungen und Verstärkungen. Eingegangen wird zu Beginn auf den Bestand an Brücken im Bundesfernstraßenbereich und auf die Entwicklung der Stahlpreise zwischen 2004 und 2008 mit einer sprunghaften Verdoppelung im August 2008 gegenüber den Jahren davor. Anschließend wird der Neubau von Stahlbrücken beleuchtet, auch mit Angabe der Möglichkeiten des Bundesministeriums fuer Verkehr, Bau und Stadtentwicklung (BMVBS) zur Förderung technischer Weiterentwicklungen und Innovationen. Aktuelle Entwicklungen bei Stahlverbundbrücken sind einteilige Überbauquerschnitte, VFT-Träger für Überführungen, luftdicht verschweisste Kästen, Hohlkästen mit Wellstahlträgern und Stahlrohrfachwerke. Alle diese Themen werden mit Beispielen unterlegt dargestellt. Neue Entwicklungen bei Instandsetzungen und Verstärkungen betreffen die verschiedenen Arten der Verstärkung von orthotropen Platten durch Aufkleben von Stahlplatten, Aufbringen einer Sandwichplatte (Sandwich-Plate-System (SPS)), Aufbetonieren einer dünnen Schicht aus ultrahochfestem Beton und Aufbringen eines steiferen Fahnbahnbelags.
NASS: the glass is half full
(2007)
The National Accident Sampling System (NASS) was born in the late 1970s. It was based on a substantial amount of experience and analysis of what was needed in the United States to understand the safety challenges of our highways. This work also showed how to collect high quality and useful crash data efficiently. Unfortunately, when Ronald Reagan - a President who believed in limited government - was elected, any hope of full funding for NASS was lost. The concept of 75 teams investigating about 18,000 serious crashes in detail annually was never realized. The system got up to 50 teams, then was cut to 36, and finally to 24 teams investigating fewer than a quarter of the originally anticipated number of crashes per year. Despite this, the NASS investigations provide a rich source of data, collected according to a sophisticated statistical sampling system to facilitate detailed national estimates of road casualties on our nation- highways and their causes. In addition, changes have been made in recent years to increase the number of more serious crashes of recent model vehicles to make the results more relevant to improving vehicle safety. A recent, detailed examination of hundreds of rollovers has provided considerable insight into rollover casualties and into what can be done to reduce them. Some of these results will be presented that show the value of the NASS system. Our experience with NASS and the Fatal Accident Reporting System (FARS) suggests a number of improvements that could be made in the United States" crash data systems. It also provides justification for a doubling or tripling of our national expenditures on crash data collection.
The misuse of CRS (child restraint system) is one of the most urgent problems in connection of child safety in cars. Numerous field studies show that more than two thirds of all CRS are used in a wrong way. This misuse could lead to serious injuries for the children. Surprisingly the quality of CRS use is coded much better in accident data (e.g. GIDAS) than the results of observatory field studies show. It is expected that misuse of CRS was not detected by the accident teams in a large number of the cases. An essential part in improving child seats and their usability is the knowledge of the relation between misuse and resulting injuries. For that the analysis and experimental reconstruction of accidents is an important part. For allowing an exact experimental accident reconstruction, it is necessary to have detailed information about the securing situation of the child and about the installation of the CRS in the car.
For the determination of the road surface roughness common methods have been established, like Skid Resistance Tester (SRT) or the Sideway-force Coefficient Routine Investigation Machine (SCRIM). Both methods are used to measure a comparable and reliable maximum friction potential value and to assess the quality of the road surface. However, the comparison of the measurements under real conditions and the results of measurements with SRT and SCRIM showed only minor correlations. The paper shows the comparison between these standardised methods and real vehicle braking tests and discusses the results.
Introduction: Spine injuries pose a considerable risk to life and quality of life. The total number of road deaths in developed countries has markedly decreased, e.g. in Germany from over 20000 in 1970 to less than 4000 in 2010, but little is known how this is reflected in the burden of spine fractures of motor vehicle users. In this study, we aimed to show the actual incidence of spine injuries among drivers and front passengers and elucidate possible dependencies between crash mechanisms and types of injuries.