Filtern
Erscheinungsjahr
Dokumenttyp
- Buch (Monographie) (153)
- Konferenzveröffentlichung (50)
- Wissenschaftlicher Artikel (28)
- Bericht (9)
- Teil eines Buches (Kapitel) (1)
- Arbeitspapier (1)
Schlagworte
- Bewertung (242) (entfernen)
Institut
- Sonstige (242) (entfernen)
Der Einsatz von aus alten Straßen rückgewonnenem Asphaltgranulat in Asphalttragschichten ist in Deutschland Stand der Technik. Aus zahlreichen Studien ist bekannt, dass die mechanischen Eigenschaften der Asphalttragschicht durch die Verwendung von Asphaltgranulat verändert werden. Zur Quantifizierung und Bewertung dieser Veränderung können Performance-Prüfungen herangezogen werden, bei denen im Labor unter definierten Prüfbedingungen das last-, temperatur- und zeitabhängige Materialverhalten von repräsentativen Probekörpern untersucht wird. So erhaltene Kennwerte der mechanischen Asphalteigenschaften finden zunehmend Eingang in die rechnerische Dimensionierung von Asphaltstraßen, mit deren Hilfe die Lebensdauer der Straßenkonstruktion abgeschätzt wird. Dieses Forschungsprojekt ist der Bestimmung der Einflüsse aus der Mischgutherstellung im Labor auf die resultierenden mechanischen Eigenschaften von mit Asphaltgranulat modifiziertem Asphalttragschicht-Mischgut gewidmet. Unter Variation der Herstellungsmodalitäten wurde untersucht, wie Asphalttragschicht-Mischgut mit Asphaltgranulat im Labor möglichst praxisnah hergestellt und daraus Probekörper gewonnen werden können, die vergleichende mechanische Eigenschaften aufweisen, wie das gleiche unter Praxisbedingungen in situ hergestellte und eingebaute Asphaltmischgut. Im Projektverlauf wurden für 2 Varianten an Asphalttragschicht-Mischgut, nämlich
- Asphaltbeton der Sorte AC 32 T S mit unterschiedlichen Asphaltgranulat-Anteilen bei Warmzugabe (Referenz 50 M.-%) und
- Asphaltbeton der Sorte AC 32 T N mit unterschiedlichen Asphaltgranulat-Anteilen bei Kaltzugabe (Referenz 30 M.-%), die Einflüsse auf die resultierenden Performance-Eigenschaften aus unterschiedlichen Labormischverfahren analysiert, nämlich
- Zweiwellen-Zwangsmischer (ZZM), Schlag-Rührmischer (SRM) und Gegenlauf-Zwangsmischer (GZM),
- unter Variation des Zugabeanteils von Asphaltgranulat von 0 bis 60 M.-% bei der Mischgut-Variante 1 (AC 32 T S) und
- unter Variation des Zugabeverfahrens bei Mischgut-Variante 2 (AC 32 T N), nämlich Warm- und Kaltzugabe.
Die durchgeführten Performance-Prüfungen hinsichtlich Steifigkeit, Widerstand gegen Kälterissbildung, Ermüdungswiderstand und Verformungswiderstand bestätigen
frühere Studien dahingehend, dass das Herstellverfahren im Labor die Performance-Eigenschaften von Asphalt signifikant beeinflusst. Bei Wahl einer ausreichend langen Nachmischzeit von mindestens 180 Sekunden wurde nun der Nachweis erbracht, dass Asphaltmischgut mit Asphaltgranulat im Labor möglichst praxisnah mittels Einsatzes eines Zweiwellen-Zwangsmischers oder alternativ mittels eines Gegenlauf-Zwangsmischers hergestellt werden kann (der Zweiwellen-Zwangsmischer ist gegenüber dem Gegenlauf-Zwangsmischer nach Möglichkeit vorzuziehen). Mit Hilfe der im Projektbericht detailliert beschriebenen Vorgehensweise ist nach dem heutigen Stand des Wissens bestmöglich sichergestellt, dass die im Labor hergestellten Probekörper vergleichbare mechanische Eigenschaften aufweisen, wie das gleiche unter Praxisbedingungen in situ hergestellte und eingebaute Asphaltmischgut.
Ausführungsqualität von Stahl- und Spannbetonwerken an Bundesfernstraßen : Erfassung und Auswertung
(2000)
Im Rahmen des Forschungsprojektes wurde in Zusammenarbeit mit der Universität-Gesamthochschule Essen untersucht, ob die angestrebte Ausführungsqualität beim Neubau von Stahlbeton- und Spannbetonbauwerken an Bundesfernstraßen erreicht wird. Zur Beantwortung dieser Fragen hat die BASt auf der Grundlage der geltenden Regelwerke, der vorliegenden Kenntnisse und der Baustellenerfahrungen Prüflisten für die wesentlichen Arbeitsvorgänge auf der Baustelle in Anlehnung an das Merkblatt für die Bauüberwachung von Kunstbauten (M-BÜ-K) erarbeitet. Die Straßenbauverwaltungen der Länder haben vor Beginn der Maßnahme ihre geplanten Bauwerke gemeldet. Für die Untersuchung der Bauwerke war es wichtig, eine möglichst ausgewogene Auswahl aus der Gesamtmenge der gemeldeten Bauwerke zu treffen. Der Zeitraum für die Hauptbegehungen sollte sich über ein Jahr erstrecken, um alle jahreszeitlichen Witterungsbedingungen berücksichtigen zu können. Dabei wurden möglichst alle Querschnittsformen, Bauweisen und Herstellungsverfahren der Überbauten berücksichtigt. Weiterhin wurden alle gängigen Spannverfahren berücksichtigt. Das Gesamtbauvolumen der ausgewählten Bauwerke lag über 400 Millionen DM. Während der Hauptphase fanden insgesamt 70 Begehungen statt. Dabei wurden insgesamt 300 "starke Abweichungen vom Sollzustand" festgestellt. Der Großteil der beobachteten Mängel trat auf bei der Verlegung der Bewehrung aus Beton- und Spannstahl, der Herstellung der Schalung, dem fertigen Beton, dem Ausschalen sowie der Nachbehandlung. Die festgestellten Mängel lassen sich im Wesentlichen zurückführen auf: - Mangelnde Qualität der Ausführungspläne (Nichtbeachtung der Forderungen der ZTV-K, keine Angabe von Rüttel- und Füllgassen, keine Darstellung der Spanngliedverankerungen in den Bewehrungsplänen, nicht eindeutige Darstellung der Bereiche mit komplizierter Bewehrungsführung); - mangelnde Qualität der Arbeitsvorbereitung; - mangelndes Qualitätsbewusstseins bei der Bauausführung - zum Teil wegen Zeit- und Kostendrucks. Insgesamt kann festgestellt werden: Bei sachgerechter Umsetzung der vorhandenen Regelungen hätten die meisten Mängel vermieden werden können; - Die vorhandenen Regelungen (insbesondere das M-BÜ-K) sind zur Erzielung der geforderten Ausführungsqualität ausreichend. Definitive Lücken gibt es ebensowenig wie krasse Überregulierungen. Den externen Bauüberwachern waren die Regelungen des M-BÜ-K in wesentlich geringerem Umfang als den Bauüberwachern der Straßenbauverwaltungen bekannt; - Wenngleich die ZTV-K Anforderungen zur Entwurfsgestaltung enthalten und sich in den RAB-BRÜ Hinweise zur Ausführung finden, werden diese in den Ausführungsplänen oft nicht umgesetzt; - Für die von Ämtern der Straßenbauverwaltungen überwachten Bauwerke stand häufiger zu wenig Personal zur Verfügung mit der Folge, dass den Bauüberwachern eine regelwerksgerechte Bauüberwachung aus Zeitgründen nicht möglich war.
In der Delegierten Verordnung (EU) 2015/962 (Europäische Kommission, 2015) wird von den Mitgliedsstaaten neben der Einrichtung nationaler Zugangspunkte zu Straßen- und Verkehrsdaten auch die gemeinsame Definition von Datenqualitätsindikatoren und Methoden zur Qualitätsbewertung und -kontrolle der verschiedenen Datenarten gefordert. Ziel dieses Projektes war es daher, ein Qualitätsmanagementsystems (QMS) für die Erfassung und Weiterverarbeitung von Daten für IVS-Dienste zu entwickeln und für die Datenarten Baustelleninformationen und Reisezeitinformationen zu spezifizieren. Dazu wurden - der Stand der Wissenschaft und Technik recherchiert, - Kriterien, Kenngrößen und Verfahren zur Messung der Qualität von Baustellen- und Reisezeitinformationen definiert, - ein organisatorischer Rahmen für ein Qualitätsmanagement erstellt, - ein Prozess zur Zertifizierung von bei Organisationen (i. d. R. Datengebern) eingeführten QMS entwickelt und - ein Leitfaden erstellt, der die Organisationen bei der Einführung und Anwendung eines QMS helfen soll. Durch die Einführung, Anwendung und regelmäßige Prüfung des im Rahmen dieses Projektes entwickelten und im zugehörigen Leitfaden beschriebenen QMS kann seitens der Datengeber ein Großteil der im Rahmen des Projektes identifizierten Probleme erkannt und behoben werden. Wesentliche Maßnahmen sind dabei, - die eindeutige Übertragung der Verantwortung für die Qualität der bereitgestellten Informationen auf die Datengeber, - die Bereitstellung (Finanzierung), regelmäßige Schulung und Motivation von zuständigem Personal mit ausreichendem Zeitbudget, - die bereits begonnene Überarbeitung der DATEX- II-Profile, - die Bereitstellung DATEX-II-Profilkonformer Systeme zur Eingabe und Übertragung der Meldungen und - die Lieferung von Qualitätskenngrößen mit den Informationen.
Assessment of the effectiveness of Intersection Assistance Systems at urban and rural accident sites
(2015)
An Intersection Collision Avoidance System is a promising safety system for accident avoidance or injury mitigation at junctions. However, there is still a lack of evidence of the effectiveness, due to the missing real accident data concerning Advanced Driver Assistance Systems. The objective of this study is the assessment of the effectiveness of an Intersection Collision Avoidance System based on real accidents. The method used is called virtual pre-crash simulation. Accidents at junctions were reconstructed by using the numerical simulation software PC-Crashâ„¢. This first simulation is called the baseline simulation. In a second step the vehicles of these accidents were equipped with an Intersection Collision Avoidance System and simulated again. The second simulation is called the system simulation. In the system simulation two different sensors and four different intervention strategies were used, based on a time-to-collision approach. The effectiveness of Intersection Collision Avoidance System has been evaluated by using an assessment function. On average 9% of the reviewed junction accidents could have been avoided within the system simulations. The other simulation results clearly showed a change in the principal direction of force, delta-v and reduction of the injury severity.
This study aimed to better understand nitrate transport in the soil system in a part of the state of North Rhine-Westphalia, in Germany, and to aid in the development of groundwater protection plans. An advection-diffusion (AD) cell was used in a miscible displacement experiment setup to characterize nitrate transport in 12 different soil samples from the study area. The three nitrate sorption isotherms were tested to define the exact nitrate interaction with the soil matrix. Soils varied in their properties which in its turn explain the variations in nitrate transport rates. Soil texture and organic matter content showed to have the most important effect on nitrate recovery and retardation. The miscible displacement experiment indicated a decrease in retardation by increasing sand fraction, and an increase in retardation by increasing soil organic matter content. Soil samples with high sand fractions (up to 94 %) exhibited low nitrate sorption capacity of less than 10 %, while soils with high organic matter content showed higher sorption of about 30 %. Based on parameterization for nitrate transport equation, the pore water velocity for both sandy and loamy soils were significantly different (P < 0.001). Pore water velocity in sandy soil (about 4 x 10 high 3 m/s) was about 100 to 1000 larger than in loamy soils (8.7 x 10 high 5 m/s). On the other hand, the reduction in nitrate transport in soils associated with high organic matter was due to fine pore pathways clogged by fine organic colloids. It is expected that the existing micro-phobicity increased the nitrate recovery from 9 to 32 % resulting in maximum diffusion rates of about 3.5 x 10 high 5 m/s2 in sandy soils (sample number CS-04) and about 1.4 x 10 high 7 m/s2 in silt loam soils (sample number FS-02).
This contribution introduces a number of psychological methods of analysis that are based on the practice-oriented collection of information directly at the site of an accident and that allow for an analysis and coding of the accident causes. Investigation examples and examples of the data combinations with basic medical and technical data are outlined. Objective of the collection is the inter-disciplinary investigation of human factors in the causes of accidents ("human-factor-analysis"). The psychological data are incorporated according to an integrative model for accident causes based on empiric algorithms in the data base of the accident research, where the clustered evaluation potential of comprehensive factors of the accident development can be illustrated. The central theoretical concept for the basic model of the progress of the accident from a psychological point of view comprises psychological indicators for the evaluation of the site of the accident for the analysis of the perception conditions as well as a classification of the gleaned data into the accident progress model according to chronological and local criteria. Perception conditions, action intentions and executions as well as conditions limiting perception and actions are acquired, using a questionnaire for persons involved in an accident, and are also integrated into the data structure concerning weighted feature characteristics as well as combined with other relevant features. Suitable systematization tools for the collection and coding of psychological accident development parameters have to be provided, which require primarily a model image of the corresponding processes from the persons involved in the accident (perceptions, expectations, decisions, actions). The interactive accident model contains components of the models by KÜTING 1990, MC DONALD 1972, SURREY 1969 and RASMUSSEN 1980. Based on the inter-action of the three partial systems "person", "vehicle" and "environment", the first step is the assessment of the situation by the persons involved in the accident. This is dependent on the personal attitudes and motives, on experiences and expectations concerning the progress of the situation. Subsequently, data concerning the manner of the coping with the ambiguous state as well as with the instable state (emergency reaction immediately before the accident occurs) are collected. The factors relating to the persons involved in the accident are gathered on several levels using corresponding questionnaires. The coding of the found and collected characteristics is conducted in a multidimensional evaluation relating to the technical results of the accident reconstruction and of the psychological classification, which are subsequently integrated in coded form into the data base of the accident research. The result of this analysis is a description of the development of the accident depicted on a chronological vector from a perception and decision theoretical perspective. This is explained in detail using exemplary cases.
Over the past two decades the popularity of consumer crash test programs, commonly referred to as New Car Assessment Programs (NCAP), has grown across the world. They are popular among government regulators as they afford a means of promoting safety innovations and levels of vehicle performance beyond those dictated by national standards. They also fulfill the demand for information regarding the safety ranking of vehicles among consumers contemplating the purchase of a new vehicle. There is no question that consumer crash test programs greatly influence vehicle design changes as well as accelerate the fitment of new safety features. The extent to which these changes can be expected to reduce serious and potentially fatal injuries will be influenced by how well the testing protocols and associated rating schemes correctly reflect the nature of the residual safety problem they seek to address. Drawing on data contained primarily in the US National Automotive Sampling System (NASS), the field relevance of current and proposed testing and rating protocols addressing frontal crash test protection is examined. Emphasis is placed on examining how accurately injury rates computed from the dummy responses measured in consumer crash tests correspond to actual injury rates observed in the field. Additional data from Canadian field investigations and US databases such as the National Motor Vehicle Crash Causation Survey (NMVCCS) are examined to see how well frontal airbag firing times, crush pulse durations and other determinants of injury are replicated in consumer testing protocols. This portion of the analysis draws on data obtained from Event Data Recorders (EDR) in both field collisions and staged tests of the same vehicle model. Vehicle rankings and overall frontal crash test ratings were found to be particularly sensitive to the choice of injury risk functions employed in the test. This was particularly true in the case of injury risk functions used to assess neck injury potential. Neck injury risk derived from Nij was found to show the least agreement with the field. Agreement between field chest injury rates and those derived from crash tests was improved considerably when chest injury risk functions for "older" occupants were employed. The paper concludes with a discussion of how different current testing protocols could be improved to enhance their field relevance.
The European Enhanced Vehicle-safety Committee wants to promote the use of more biofidelic child dummies and biomechanical based tolerance limits in regulatory and consumer testing. This study has investigated the feasibility and potential impact of Q-dummies and new injury criteria for child restraint system assessment in frontal impact. European accident statistics have been reviewed for all ECE-R44 CRS groups. For frontal impact, injury measures are recommended for the head, neck, chest and abdomen. Priority of body segment protection depends on the ECE-R44 group. The Q-dummy family is able to reflect these injuries, because of its biofidelity performance and measurement capabilities for these body segments. Currently, the Q0, Q1, Q1.5, Q3 and Q6 are available representing children of 0, 1, 1.5, 3 and 6 years old. These Q-dummies cover almost all dummy weight groups as defined in ECE-R44. Q10, representing a 10 year-old child, is under development. New child dummy injury criteria are under discussion in EEVC WG12. Therefore, the ECE-R44 criteria are assessed by comparing the existing P-dummies and new Q-dummies in ECE-R44 frontal impact sled tests. In total 300 tests covering 30 CRSs of almost all existing child seat categories are performed by 11 European organizations. From this benchmark study, it is concluded that the performance of the Q-dummy family is good with respect to repeatability of the measurement signals and the durability of the dummies. Applying ECE-R44 criteria, the first impression is that results for P- and Q-dummy are similar. For child seat evaluation the potential merits of the Q-dummy family lie in the extra measurement possibilities of these dummies and in the more biofidelic response.
From literature well-known analyzes on risks, hazards and causes of accidents of older drivers are amended by the present study in which a comparison of the specific features of accident causes of older car drivers (older than 60 years) and of younger car drivers (under 25 years) is conducted. Mainly the question is pursued if specific errors, mistakes and lapses are predominant in the two different age groups. The analysis system ACAS (Accident Causation Analysis System) used hereby consists of a sequential system of accident causation factors from the human, the technical and the infrastructural field, whereupon for this study the influence of the human features on the accident development in two different age groups is of interest. ACAS is both an accident model and an analysis and classification system, which describes the human participation factors of an accident and their causes in the temporal sequence (from the perceptibility to concrete action errors) taking into consideration the logical sequence of individual basic functions. In five steps (categories) of a logical and temporal sequence the hierarchical system makes human functions and processes as determinants of accident causes identifiable. The methodology specifically focuses on the use in so-called "In-Depth" and "On-Scene" investigation studies. With the help of the system for each accident participant one or more of five hypotheses of human cause factors are formed and then specified by appropriate verification criteria. These hypotheses in turn are further specified by indicators in such manner that the coding of the causation factors by a code system meets the needs of database processing and are accessible to a quantitative data analysis. The first results of the descriptive comparison of the two age groups concern mainly differences in the functional levels "information admission/perception" (where the elderly drivers have more difficulties than the young ones) and "information processing/evaluation" (where the younger drivers show more problems). Concerning the cognitive function of "planning" the group of younger drivers seems to be more often involved in an accident because of excessive speed.
Der Straßenbaustoff Asphalt ist unter bestimmten Voraussetzungen in der Lage, während Erholungsphasen eine bereits eingetretene Strukturschädigung selbsttätig zum Teil oder vollständig zurückzubilden und so eine Regeneration des Baustoffs zu bewirken. Man spricht von Selbstheilungs- oder Healing-Eigenschaften. Für eine Steigerung der Dauerhaftigkeit von Straßenbauasphalten wäre es von großem Nutzen, die Healing-Eigenschaften kontrollieren bzw. stimulieren zu können. Eine systematische Untersuchung der Healing-Eigenschaften von Bitumen und Asphalt sowie geeignete Verfahren zu ihrer prüftechnischen Ansprache waren bisher nicht bekannt. Ziel des Forschungsprojekts war es, zu klären, ob und mit welchen Prüf- und Auswertemethoden die Healing-Eigenschaften von Straßenbauasphalten im Labor angesprochen werden können. Mit dieser Arbeit werden erstmals Ergebnisse aus systematisch variierten Reihenuntersuchungen zu den Selbstheilungskräften von Bitumen und Asphalt vorgestellt. Es wurden statische und zyklisch-dynamische Laborprüfungen mit Lastpausen (Erholungsphasen) zwischen den Belastungszyklen eingesetzt. Zur Ansprache von Healing-Eigenschaften erwiesen sich auf Asphaltebene kraftgeregelte Zug-Druck-Wechsellastprüfungen und auf Bitumenebene kraftgeregelte DSR-Ermüdungsprüfungen jeweils mit Lastpause als gut geeignet. Es wurde eine Auswertemethodik entwickelt und neue Healing-Indices eingeführt, die eine Beurteilung des Healing-Verhaltens an einem einzigen Probekörper nach Durchführung einer Ermüdungsprüfung erlauben. Die materialspezifischen Healing-Eigenschaften könnten bei der rechnerischen Dimensionierung vorteilhaft berücksichtigt werden. Dazu wird ein Konzept vorgestellt, nach dem die im Rahmen von Dimensionierungen notwendigen Ermüdungsprüfungen mit Untersuchungen zum Healing-Verhalten zu ergänzen sind. Folglich kann ein modifiziertes Materialgesetz verwendet werden, welches auch die materialspezifischen Healing-Eigenschaften abbildet.