620 Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
- 2013 (99) (entfernen)
Dokumenttyp
- Konferenzveröffentlichung (51)
- Buch (Monographie) (29)
- Wissenschaftlicher Artikel (15)
- Teil eines Buches (Kapitel) (2)
- Bericht (2)
Sprache
- Deutsch (55)
- Englisch (43)
- Mehrsprachig (1)
Schlagworte
- Germany (59)
- Deutschland (58)
- Conference (29)
- Konferenz (29)
- Forschungsbericht (23)
- Research report (23)
- Bewertung (18)
- Evaluation (assessment) (18)
- Simulation (18)
- Safety (17)
The misuse of CRS (child restraint system) is one of the most urgent problems in connection of child safety in cars. Numerous field studies show that more than two thirds of all CRS are used in a wrong way. This misuse could lead to serious injuries for the children. Surprisingly the quality of CRS use is coded much better in accident data (e.g. GIDAS) than the results of observatory field studies show. It is expected that misuse of CRS was not detected by the accident teams in a large number of the cases. An essential part in improving child seats and their usability is the knowledge of the relation between misuse and resulting injuries. For that the analysis and experimental reconstruction of accidents is an important part. For allowing an exact experimental accident reconstruction, it is necessary to have detailed information about the securing situation of the child and about the installation of the CRS in the car.
Having a look at safety to traffic and the prevention of accidents it can be observed that technical improvements in active safety of vehicles have let to various positive effects in this area. Among other components the tyre-road-contact takes a key role in the development of active safety technologies. All forces in accelerating, breaking and vehicle guidance have to be transmitted through the tyre-road contact area by friction forces. A common way to characterize a friction process is to identify the coefficient of friction μ between two touching materials. Even though there are several approaches to experimentially characterise road surfaces, no standard method exists. In this paper an overview of existing test methods is given. Furthermore the preliminary design of a newly developed portable test device with its possibility to investigate the tyre-road-friction of arbitrary roads or even places of accidents is shown.
Automotive interiors have long been a potentially injurious impact area to occupants during accidents, especially in the absence of adequate padding. The U.S. Federal Motor Vehicle Safety Standard (FMVSS) 201, Occupant Protection in Interior Impact, outlines test procedures and performance criteria in order to mitigate potentially injurious head impacts to interior surfaces. FMVSS 201 specifies a finite set of impact locations and applies to passenger vehicles of a specified year range and with a gross vehicle weight rating less than 10,000 lb. In this paper, two head impact test methodologies are presented, a pendulum-test device and a Free Motion Headform (FMH) launching device, which allows for dynamic, repeatable impact evaluation of various vehicle interior surfaces and their impact attenuation abilities. The presented testing includes multiple series that evaluate the effect of differing vehicle upper interior padding on occupant head injury. One study in particular, analyzes a head impact to the side header of a heavy truck (not included in FMVSS 201) during a 90 degree rollover. Additionally, two other series of tests are presented which assess the injury reduction effect of side airbags to near side as well as far side occupants in a side impact scenario. Lastly, a forensic analysis is presented which evaluates two possible head impact locations experienced in a real world accident by analysis of the resulting interior compartment damage utilizing the FMH launching device test method. The data collected and presented includes accelerometer instrumentation and high speed video analysis. These studies demonstrate that adequate padding and airbags are very effective at mitigating head injury potential at impact speeds of 12-25 mph (19-40 kph).
Im gegenstädlichen Forschungsbericht werden zunächst die Grundlagen der geothermischen Energienutzung beschrieben. Dies beinhaltet Anforderungen an den Energienutzer, Einflüsse aus den vorhandenen Untergrund- und Grundwasserverhältnissen sowie dem Fundierungskonzept des Bauwerkes bzw. dessen Bauwerksstruktur. Weiters werden die derzeit vorhandenen Absorbersysteme sowie deren Betriebsweisen beschrieben. Für die Planung einer Tunnelthermie-Anlage wurde ein Planungsleitfaden erstellt, der zunächst die wesentlichen Einflussfaktoren für eine technisch-wirtschaftliche Planung einer Erdwärmeanlage sowie deren Betrieb, Ausfallrisiken und einen Überblick über die rechtlichen Rahmenbedingungen enthält. Der Planungsleitfaden beinhaltet schließlich auch eine Beschreibung der einzelnen Projektstufen, die im Zuge der Planung und Umsetzung einer Tunnelthermie-Anlage zu absolvieren sind. Weiters wurde eine Planungssystematik erarbeitet, die die Angabe wesentlicher Entwurfskriterien beinhaltet, die im Zuge der Planung einer Tunnelthermie-Anlage zu beachten sind. Für die Dimensionierung einer Tunnelthermie-Anlage bedarf es diverser Parameter, die im Vorfeld zu erkunden sind. Diese werden diskutiert und es werden Empfehlungen zur thermischen Erkundung in Kombination mit üblichen geotechnischen Aufschlüssen angeführt. Technische Detaillösungen wurden für beispielhafte Tunnelthermie-Anlagen entwickelt, beschrieben und dargestellt. Darauf aufbauend wurde der Einsatz der Massivabsorbertechnologie bei üblichen deutschen Straßentunneln untersucht. Für die Gestaltung eines Bauvertrages im Zuge der Ausschreibung einer Tunnelthermie-Anlage wurden Empfehlungen erarbeitet. Weiters wird die Schnittstelle zwischen der Erdwärmeanlage und der Haustechnik sowie zwischen dem geothermischen Fachplaner des Auftraggebers und jenem des Auftragnehmers definiert. Abschließend wurden beispielhafte Leistungspositionen für Tunnelthermie-Anlagen erstellt.
Die Ermittlung von Grundunfallkostenraten und Quantifizierung von Zuschlägen für Landstraßenquerschnitte sind Ziel dieses Forschungsvorhabens. Die Ergebnisse sollen eine Bewertungsgrundlage im Handbuch für die Verkehrssicherheit von Straßen (HVS) darstellen. 3.600 km Landstraße aus sechs Bundesländern liegen dem Untersuchungskollektiv zu Grunde. Neben dem mehrjährigen Unfallgeschehen bilden Daten der SIB und Erhebungen aus Streckenbefahrungen die Datengrundlage der Untersuchungen. Die Zuordnung der Streckenabschnitte erfolgte in Anlehnung an den Entwurf der Richtlinie für die Anlage von Landstraßen (RAL) in fünf verschiedene (Regel-) Querschnittsgruppen. Multivariate Modelle zur Beschreibung der Unfallhäufigkeit bilden die mathematische Grundlage der Analyse. Gegenüber monokausalen Betrachtungen weisen sie den Vorteil auf, eine Vielzahl von Einflussgrößen zu erfassen sowie mögliche Abhängigkeiten zwischen verschiedenen Variablen zu berücksichtigen. Für die verschiedenen Straßenquerschnitte und Einmündungen mit Vorfahrtregelung durch Verkehrszeichen wurden jeweils drei Modelle nach Unfallschwere erstellt. Zu Grunde liegende Merkmale wurden auf ihren signifikanten Erklärungsanteil zur Beschreibung der Unfallhäufigkeit geprüft und entsprechend im Modell als Zuschlag berücksichtigt. Auf Basis dieser Ergebnisse wurden Funktionen zum Verlauf der Unfallrate und Unfallkostenrate erzeugt. Grundunfallkostenraten beschreiben das fahrleistungsbezogene Unfallkostenniveau eines Netzelements, welches bei regelkonformem Ausbau der Strecke erreicht werden kann. Da in den Modellen auch Merkmale berücksichtigt sind, die kein Defizit im eigentlichen Sinne darstellen, entspricht die Höhe der UKR ohne jegliche Zuschläge einem Grundniveau. Diesem sind Zuschläge, unterteilt in Defizite und die Streckencharakteristik beschreibende Eigenschaften, zuzuordnen. Anhand der Modelle kann nachgewiesen werden, dass verschiedene Straßenquerschnitte ein unterschiedliches Grundsicherheitsniveau aufweisen. Zwischen Unfallhäufigkeit und DTV besteht ein nichtlinearer Zusammenhang. Die Unfallrate bzw. Unfallkostenrate stellt somit eine vom DTV abhängige Kenngröße dar. In Abhängigkeit des Querschnitts besitzen verschiedene Merkmale einen Einfluss auf die Verkehrssicherheit. Die Größenordnung der Zuschläge kann als Anteil am Grundniveau der UKR beschrieben werden. Die ermittelten Zuschläge wurden ggf. vergleichend betrachtet und im Rahmen einer plausibilisierten Bewertung der Querschnitte angepasst. In Anlehnung an das HVS erfolgt die Darstellung der Berechnung für Grundunfallkostenraten und deren Zuschläge für Landstraßenquerschnitte. Dabei werden zwei verschiedene Ansätze vorgestellt. Die Ergebnisse für Einmündungen mit Vorfahrtregelung durch Verkehrszeichen besitzen empfehlenden Charakter.
Im Rahmen des Forschungsvorhabens "Absenkung der Produktions- und Verarbeitungstemperatur von Asphalt durch Zugabe von Bitumenverflüssigern", FE 07.203/2002/CRB, sind Langzeitbeobachtungen der eingerichteten Versuchsstrecken vereinbart. Hierzu wer-den die Strecken BAB A7 und B 106 nach zwei, vier und acht Jahren systematisch visuell und messtechnisch beurteilt. Die Ergebnisse werden als Ergänzungen zum Abschlussbericht dargestellt. Die vorliegende Ergänzung fasst den Zustand nach insgesamt 8-jähriger Liegezeit unter Verkehrsbelastung zusammen. Die visuelle Zustandserfassung fällt für beide Versuchsstrecken durchaus noch positiv aus. Die temperaturabgesenkt hergestellten Erprobungsabschnitte schneiden dabei - bis auf wenige Ausnahmen - auf beiden Strecken mit geringen Vorteilen gegenüber den Referenzstrecken ab. Die messtechnische Beurteilung bestätigt diesen Eindruck. Es wurden keine bedeutenden Abweichungen in der Längsebenheit festgestellt. Die ermittelten Spurrinnentiefen liegen auf beiden Strecken auf etwa gleichem, sehr niedrigem Niveau. Die Griffigkeit kann für beide Strecken als sehr gut beurteilt werden. Die absoluten Griffigkeitsbeiwerte liegen auf der B 106 mit einem SMA 0/8 S erwartungsgemäß höher als auf der BAB A7. An den aus Bohrkernen extrahierten Bindemitteln wurden Kenndaten ermittelt und den mit dem Endbericht veröffentlichten Ergebnissen gegenübergestellt. Die Daten sind hinsichtlich eines unterschiedlichen Alterungsverhaltens ausgewertet worden. Dabei wurde versucht, Vor- und Nachteile der Bindemittelvarianten zu erkennen und herauszuarbeiten.
The main objective of EC CASPER research project is to reduce fatalities and injuries of children travelling in cars. Accidents involving children were investigated, modelling of human being and tools for dummies were advanced, a survey for the diagnosis of child safety was carried out and demands and applications were analysed. From the many research tasks of the CASPER project, the intention of this paper is to address the following: • In-depth investigation of accidents and accident reconstruction. These will provide important points for the injury risk curve, in order to improve it. Different accident investigation teams collected data from real road accidents, involving child car passengers, in five different European countries. Then, a selection of the most appropriate cases for the injury risk curve and the purposes of the project was made for an in-depth analysis. The final stage of this analysis was to conduct an accident reconstruction to validate the results obtained. The in-depth analysis included on-scene accident investigation, creating virtual simulations of the accident/possible reconstruction, and conducting the reconstruction. In the cases of successful reconstructions, new points were introduced to the injury risk curves. Accident reconstructions of selected cases were carried out in test laboratories as the next step following in-depth road accident investigation. These cases were reconstructed using similar child restraint systems (CRS) and the same type make and model as in the real accidents. Reconstructing real cases has several limitations, such as crash angle, cars" approximation paths and crash speed. However, a few changes and applications on the testing conditions were applied to reduce the limitations and improved the representations of the real accidents. After conducting the reconstructions, a comparison between the deformations of the cars on the real accident and the vehicles from the reconstructions was made. Additionally, a correlation between the data captured from the dummies and the injury data from the real accident was sought. This finalises an in-depth analysis of the accident, which will provide new relevant points to the injury risk curve. The CASPER project conducted a large research programme on child safety. On technical points, a promising research area is the developing injury risk curves as a result of in-depth accident investigations and reconstructions. This abstract was written whilst the project was not yet finished and final results are not yet known, but they will be available by the time of the conference. All the works and findings will not necessarily be integrated in the industrial versions of evaluation tools as the CASPER project is a research program.
The grip between the road surface and vehicle tires is the physical basis for the moving of all vehicles in road traffic. In case of an accident the available grip level is one of the most relevant influence factors, influencing the causation and the procedure of the accident. However, the estimation of the grip level is not easy and therefore, is commonly not done on the accident scene. This is especially true for the measurement of the water depth. Until now, real accident databases provide no measurement data about the grip level and the water film depth and thus, the estimation of its influence is not possible yet. From the tyre manufacturers point of view, it is important to know about the road conditions (namely grip level, macro-texture, water depth, temperature) at the accident scene, as well as the operating conditions of the vehicles (braking, loss of control, speed, etc). These data is necessary to define relevant tyre traction tests for the end-user and for regulations. For this reason VUFO and Michelin developed a consistent method for the measurements of grip level and water depth for the accidents of the GIDAS database. The accident research team of Dresden, which documents about 1000 accidents with at least one injured person every year, is measuring the micro-roughness and the macro-roughness directly on the spot. For the measurement of the micro-roughness a Skid Resistance Tester (British Pendulum) is used. The Mean Texture Depth (describing the macro-roughness) is measured by the Sand Depth Method. Since June 2009, measurements for more than 700 accidents including 1200 participants have been carried out. In case of wet or damp road conditions during the accident, the water depth is measured additionally. Therefore VUFO and Michelin developed a special measurement device, which allows measurements with an accuracy of 1/10 millimetre. The measurement point at the accident scene is clearly defined and thus, the results are comparable for all different accidents and participants. The use of the GIDAS database and the accident sampling plan allows representative statements for the German accident scenario. With this data it is possible for the first time to have an accurate view of the road conditions at the accident scene. One possibility is a more detailed estimation of hydroplaning accidents using the actually measured water depths. The development of new testing methods and new tires can be based on the real situation of the road infrastructure. Furthermore, the combination of the technical GIDAS data and the measured road surface properties can also be used for the estimation of effectiveness of several safety systems like the brake assist and/or emergency braking systems. The calculation of a reduced collision speed due to the use of a brake assist is only one example for the application of real measured grip level data.
The GRSP informal group on child restraint systems (CRS) finalised phase 1 of a new regulation for the homologation of CRS . This regulation is the subject of several discussions concerning the safety benefits and the advantages and disadvantages that certain specific points may bring. However, these discussions are sometimes not based on scientific facts and do not consider the whole package but only single items. Based on the experience of the CASPER partners in the fields of human behaviour, accident analysis, test procedures and biomechanics in the area of child safety, a consideration of the safety benefits of phase 1 of the new regulation and recommendations for phase 2 will be given.
It is well known that most accidents with pedestrians are caused by the driver not being alert or misinterpreting the situation. For that reason advanced forward looking safety systems have a high potential to improve safety for this group of vulnerable road users. Active pedestrian protection systems combine reduction of impact speed by driver warning and/or autonomous braking with deployment of protective devices shortly before the imminent impact. According to the Euro NCAP roadmap the Autonomous Emergency Braking system tests for Pedestrians Protection will be set in force from 2016 onwards. Various projects and organisations in Europe are developing performance tests and assessment procedures as accompanying measures to the Euro NCAP initiative. To provide synthesised input to Euro NCAP so-called Harmonisation Platforms (HP-) have been established. Their main goal is to foster exchange of information on key subjects, thereby generating a clear overview of similarities and differences on the approaches chosen and, on that basis, recommend on future test procedures. In this paper activities of the Harmonisation Platform 2 on the development of Test Equipment are presented. For the testing targets that mimic humans different sensing technologies are required. A first set of specifications for pedestrian targets and the propulsion systems as collected by Harmonisation Platform 2 are presented together with a first evaluation for a number of available tools.