620 Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
- 2010 (92) (entfernen)
Dokumenttyp
Schlagworte
- Deutschland (40)
- Germany (40)
- Conference (31)
- Konferenz (31)
- Forschungsbericht (25)
- Research report (25)
- Safety (18)
- Sicherheit (17)
- Measurement (16)
- Messung (16)
Institut
Neue Bezeichnungen bei der Klassifizierung von Reflexfolien zur Verwendung für Verkehrszeichen
(2010)
Mit Einführung der Europäischen Norm DIN EN 12899 „Ortsfeste vertikale Straßenverkehrszeichen“ müssen alle entsprechenden nationalen Normen an diese Norm angepasst werden. Aus diesem Grund ist die Norm DIN 67520 „Retroreflektierende Materialien zur Verkehrssicherung – Lichttechnische Mindestanforderungen an Reflexstoffe“ überarbeitet worden. Dies hat zur Folge, dass die bisherige Klassifizierung von Reflexfolien zur Verwendung für Verkehrszeichen nach Bauarten durch eine Klassifizierung nach rein lichttechnischen Eigenschaften (Retroreflexions-Klasse) ersetzt werden muss.
Das ivg.Produktzertifikat
(2010)
Durch die Einführung der Europäischen Produktnormen DIN EN 13249 ff im Jahr 2002 entfiel die Prüfung der materiellen Eigenschaften von Geokunststoffen, die im Straßenbau zum Einsatz kommen. Als qualitätssichernde Maßnahme wurde die „Empfehlung für die Durchführung der Überwachung und Zertifizierung von Geotextilien, geotextilverwandten Produkten und Dichtungsbahnen, zugelassen nach dem europäischen Konformitätsverfahren System 2+“ vom Industrieverband Geokunststoffe im Einvernehmen mit der Bundesanstalt für Straßenwesen, dem Ausschuss Geokunststoffe der Forschungsgesellschaft für Straßen- und Verkehrswesen und den ÜZ-Stellen erarbeitet. Die Empfehlungen werden im Beitrag erläutert.
Berücksichtigung Sonstiger Anlagenteile an Bundesfernstraßen im Rahmen des Erhaltungsmanagements
(2010)
Das Bundesfernstraßennetz umfasst derzeit mehr als 51.000 km, dessen Bruttoanlagevermögen mit ca. 187,2 Mrd. EUR beziffert wird. Die Bedeutung des Managements der Erhaltung dieses Netzes sowie das hierfür erforderliche Finanzvolumen werden zukünftig steigen. Für den Bereich der Fahrbahnen und der Bauwerke werden entsprechende Instrumente vorgehalten. Vor dem Hintergrund der zunehmenden Ausstattung der Straßen mit Sonstigen Anlagenteilen stellt sich die Frage, ob hierfür ein entsprechendes Instrumentarium erforderlich ist.
Dem Bauen mit Beton kommt in Bezug auf die Nachhaltigkeit im Brücken- und Ingenieurbau eine besondere Bedeutung zu. Nationale und internationale Entwicklungen werden erläutert. Die Ergebnisse laufender und geplanter Aktivitäten sollen bei der Weiterentwicklung von Regelwerken berücksichtigt werden. Weitere Ziele sind, die zahlreichen Bestrebungen im Bereich Nachhaltigkeit im Brücken- und Ingenieurbau zu harmonisieren und die Vorstellungen der Baulastträger in die aktuellen Entwicklungen zu integrieren.
CE-Kennzeichnung von Gegenständen zur Sicherung von Arbeitsstellen - Widerspruch und Herausforderung
(2010)
Der Beitrag beschreibt die Probleme, die im Rahmen der Umsetzung der Bauproduktenrichtlinie in nationale Regelwerke bei Produkten, die in Baustellenbereichen eingesetzt werden, vorhanden sind. Erläutert wird dies für Leitbaken, Leitschwellen, Leitkegel, transportable Schutzeinrichtungen, Warnleuchten sowie Verkehrszeichen und Wechselverkehrszeichen.
The Federal Highway Network of Germany represents considerable fixed assets. Construction and maintenance activities not only require a high budget, but also influence the traffic infrastructure and, thus, the economy and society as a whole. The present safety of the network has to be ensured under consideration of environmental aspects. At the same time the network owner has to make sure that the civil works are carried out in the most efficient way. Considering the fact that financial resources are restricted, the costs have to be spent in a way to obtain the greatest possible benefit. This task is supported by the application of a comprehensive Asset Management, which is subdivided into operational and controlling tasks respectively. The paper describes the current management procedures.
Mit der flächendeckenden Einführung des Beifahrerairbags ergab sich das Problem der nachträglich festgestellten Inkompatibilität mit rückwärts gerichten Kindersitzen. Zahlreiche tödliche Unfälle mit Babyschalen, insbesondere in den USA, führten unter anderem dazu, dass in den Mitgliedsstaaten der Europäischen Union die Beförderung von Kindern in einem rückwärtsgerichteten Kinderschutzsystem auf einem mit Frontairbag geschützten Autositz untersagt wurde, sofern der Airbag nicht deaktiviert wurde. Heute gibt es eine Vielzahl an Möglichkeiten, die dem Nutzer zur Abschaltung des Airbags zur Verfügung stehen. Mit der Notwendigkeit der Abschaltung ergibt sich die Gefahr zweier Arten der Fehlbenutzung: die Beförderung eines Kindes in einer Babyschale trotz aktivierten Airbags beziehungsweise die Mitfahrt eines erwachsenen Insassen trotz deaktivierten Airbags. Im Rahmen dieser Studie wurden zu den beiden Fehlbenutzungsarten Beobachtungs- und Befragungsstudien durchgeführt, Unfalldaten in Hinblick auf die Problematik der Fehlbenutzung der Airbagabschaltung analysiert und Versuche zur erneuten Bewertung des Risikos, das durch heutige und zukünftige Airbagsysteme ausgeht, durchgeführt. In den Umfragen ließen sich nur schwer Daten zum Missbrauch bei der Beförderung von Kindern mit Airbag auf dem Beifahrersitz erfassen. Es kommt insgesamt zu nur wenigen Fällen des Transports eines Kindes auf dem Beifahrersitz mit aktivem Airbag, was zum einen an der hohen Abschaltquote des Beifahrerairbags liegt, zum anderen an der Präferenz der Eltern, die Kinder auf dem Rücksitz zu transportieren. Der Großteil dieser Fehlbenutzungsfälle entsteht in älteren Pkw, die einen Werkstattaufenthalt für die Deaktivierung/Aktivierung erfordern. Keine Missbräuche beziehungsweise technische Fehler fanden sich bei den Systemen mit automatischer Sitzerkennung. Der überwiegende Anteil der Missbrauchsfälle bei den Modellen mit manueller Umschaltmöglichkeit geht offenbar auf Vergessen zurück. Der Missbrauch zweiter Art wird ebenfalls wirkungsvoll durch automatische Systeme verhindert. Bei dieser Beförderungskonstellation ergibt sich jedoch praktisch immer ein Problem, wenn der Beifahrerairbag in einer Werkstatt deaktiviert wurde. Die dadurch für einen erwachsenen Mitfahrer entstehende Gefährdung wird als weniger gravierend eingeschätzt. Bei der manuellen Umschaltung im Fahrzeug verbleibt ebenfalls ein Vergessensproblem wie beim Missbrauch erster Art. Auch die Unfallanalyse deutet auf eine geringe Fehlbenutzungsquote hin. Von den untersuchten GIDAS-Frontalaufprallunfällen mit über 300 betroffenen Kindern nutzten lediglich 24 Kinder den Beifahrerplatz in einem Auto, das mit einem Beifahrerairbag ausgestattet war. In den meisten Fällen war der Airbag vorschriftsmäßig deaktiviert. In den nachgewiesenen Fehlbenutzungsfällen waren die Unfallfolgen für die betroffenen Babys gering. Die untersuchten Einzelfälle zeigen jedoch die tödliche Gefahr, die vom Beifahrerairbag ausgehen kann. Auf der technischen Seite gab es im Lauf der letzten Jahre grundsätzliche Veränderungen im Bereich der Gestaltung des Beifahrerairbags. Während bei der früheren Einbauposition des Airbags die Schale direkt angeschossen wurde, entfaltet sich dieser heutzutage eher nach oben, stützt sich an der Windschutzscheibe ab und kommt danach erst mit der Schale in Kontakt. Da er in diesem Zustand aber schon weitestgehend voll entfaltet ist, besitzt er zu diesem Zeitpunkt kaum noch die Aggressivität, die bei den Beifahrerairbags der ersten Generation beobachtet werden konnte, und stellt somit wahrscheinlich eine geringere Gefahr für das Kleinkind in der Babyschale dar. Damit lässt sich ein deutlicher Trend in Richtung weniger gefährlicher Airbags erkennen. Der Originalbericht enthält als Anhänge den Abdruck des Expertenfragebogen, die Zusammenfassung der Expertenbefragung, den Umdruck der Online-Befragung sowie den Fragebogen der Feldbefragung "Kindersitze und Airbag auf dem Beifahrersitz". Auf die Widergabe dieser Anhänge wurde in der vorliegenden Veröffentlichung verzichtet. Sie liegen bei der Bundesanstalt für Straßenwesen vor und sind dort einsehbar. Verweise auf die Anhänge im Berichtstext wurden zur Information des Lesers beibehalten.
Deutschland besitzt eines der leistungsfähigsten Verkehrssysteme in Europa. Dieses Verkehrssystem stellt die Voraussetzung für eine hohe Mobilität und wirtschaftliche Leistungsfähigkeit dar. Jedoch sind mit dieser funktionierenden Mobilität auch negative Auswirkungen verbunden - hier ist an erster Stelle der Verkehrslärm zu nennen. Im Rahmen nationaler und internationaler Forschungsarbeiten ist es in den letzten Jahren gelungen, die Wirkmechanismen der Lärmentstehung im Zusammenspiel Reifen-Fahrbahn detailliert zu beschreiben und Anforderungen für eine dauerhafte Lärmreduzierung zu formulieren. Die technischen Potenziale der Schallreduktion sind jedoch noch nicht ausgeschöpft.
This article reports on a two-year study (2006 to 2008) of the distribution of de-icing salts (NaCl) applied to the road and the influence of traffic on the effective times of the de-icing salts. The research was focused on the needed resting periods of de-icing salts on road surfaces. The study used sensors installed in two lanes of the Motorway A4 in the area of the Dresden-Hellerau Highway Surveillance Center (Germany), to measure air and ground temperatures, wind speed and direction, liquid film thicknesses and residual quantities of salt on the road surface during ongoing traffic at 5-minute intervals. The authors conclude with four observations that can be useful for applying de-icing salts more judiciously: preventive spreading is only sensible if applied timely, i.e. immediately prior to icing events to be expected; the time-frame for preventive spreading on the dry road surface is maximum 60 minutes and on the moist road surface maximum 120 minutes; by increasing spreading densities in preventive spreading, this timeframe cannot be extended; it is completely sufficient if the spreading width is adjusted in such a way that the outer wheel tracks are also covered by the spreading. Distribution across the entire width of the lane will be caused by the rolling traffic within a few minutes.
Die Polierresistenz der Gesteine beeinflusst nach dem Stand der Forschung maßgeblich die Griffigkeit einer Fahrbahnoberfläche. Diese Gesteinseigenschaft wird in Europa seit langem und im weit überwiegenden Teil der Fälle mit dem so genannten Polished Stone Value (PSV) beschrieben und in Deutschland nach den DIN EN 1097-8 ermittelt. Als Prüfmittel sind für das Verfahren ein Kontrollgestein und Poliermittel aus Naturkorund vorgeschrieben, die genau spezifiziert und aus England zu beziehen sind. Nachteilig ist bei dem Prüfverfahren die unregelmäßige Verfügbarkeit und die Inhomogenität der Prüfmittel, die im Wesentlichen aus der europaweiten Anwendung des Verfahrens resultieren. Als Alternative zu dem englischen Kontrollgestein wurde bereits 2007 ein nationales Kontrollgestein ergänzend in die Technischen Prüfvorschriften für Gesteinskörnungen (TP Gestein-StB) Teil 5.4.1 aufgenommen. Die Frage nach der Möglichkeit des Ersatzes des Poliermittels und auch der Auswirkung seines Einsatzes auf die Präzision bei der Ermittlung des PSV wurde im Rahmen eines Forschungsprojekts untersucht. Zusammengefasstes Ergebnis ist, dass das alternativ eingesetzte Poliermittel aus Quarz für das Prüfverfahren geeignet ist und eine mindestens vergleichbare Präzision der Prüfergebnisse erwartet werden kann. Aufgrund der abweichenden Polierwirkung des Poliermittels und der abweichenden Polierresistenz des nationalen Kontrollgesteins ist jedoch die Berechnungsformel anzupassen, um den langjährigen Bewertungshintergrund und die daraus resultierenden Anforderungen in den Regelwerken beibehalten zu können. Die Vorgehensweise, die Überlegungen und das Ergebnis des Forschungsprojekts sind in dem Artikel dargestellt.
Verkehrliche Ereignisse können einen großen Einfluss auf die Stickoxidbelastung nehmen. So erzeugen schon die Schwankungen der Verkehrsmenge im Tagesverlauf durch Berufspendlerverkehr typische Verläufe bei den Stickoxid-Belastungen. Aber auch außergewöhnliche Ereignisse wie Straßenteil- oder -vollsperrungen, Staus und damit einhergehende Änderungen des Verkehrsflusses und der mittleren Fahrzeuggeschwindigkeit sowie Arbeitsstellen und in ihrem Zuge geänderte Linienführungen wirken sich zum Teil durch deutliche Zu- bzw. Abnahmen der Stickoxid-Konzentrationen aus. Im Rahmen dieses Projektes wurden Daten der Luftqualitätsmessungen an zwei Standorten der BASt an der A 4 und der A 61 in Bezug auf den Einfluss besonderer verkehrlicher Ereignisse untersucht. Dabei konnten deutliche Effekte in den Stickoxidbelastungen festgestellt werden. So wurden Abnahmen der Luftschadstoffbelastung insbesondere bei Verringerung des Schwerverkehrs festgestellt. Deutliche Zunahmen hingegen wurden beobachtet während Stausituationen und zähflüssigem Verkehr. Das Projekt ist vor dem Hintergrund der Stickoxid-Problematik für die weitere Beobachtung der Entwicklung dieser Luftschadstoffkomponenten in den kommenden Jahren von maßgeblicher Bedeutung. Verkehrsseitig erscheint die sinnvollste Möglichkeit zur Reduzierung von NOx-Luftschadstoffbelastungen die Einführung der Emissionsstandards EURO 5 und EURO 6 zu sein. Jedoch kann eine durch sie hervorgerufene Entlastung erst in vielen Jahren merkbar wirken, wenn sich die Fahrzeugflotte so weit erneuert hat, dass die genannten Standards den Großteil der Fahrzeuge ausmachen. Solange müssen passive Maßnahmen ergriffen werden, die die Luftqualität verbessern helfen. Daher könnten die Ergebnisse der Studie in Bezug auf Stickoxidbelastungen Hinweise auf etwaige Minderungsmöglichkeiten durch Verkehrsverstetigung und Verkehrsverlagerung geben. Jedoch muss bei diesen Betrachtungen immer beachtet werden, dass es durch Verlagerungseffekte an anderen Stellen im Straßennetz zu deutlichen Zunahmen der Verkehrsmenge und damit auch der Luftschadstoffbelastung kommen kann.
Every second counts when human lives are at stake. The increasingly safe design of vehicles presents rescuers with a serious challenge. Faced with high-strength steels and body reinforcements, even the most powerful cutters reach their limits. Therefore, incident commanders require information on the technical features and components installed, directly in the vehicle. Several tests have shown that such information helps to save valuable minutes. Therefore, a standardised A4 "rescue sheet" containing information on the location of cabin reinforcements, the tank, the battery, airbags, gas generators, control units etc. " and indicating adequate cutting points must be used throughout Europe. Hopefully, in a few years, the new eCall emergency call system will be in place everywhere in Europe. The system will transmit the relevant vehicle-specific data directly to the rescuers on-site. Until then, we need a simple and effective solution that saves lives.
The role of a national motor vehicle crash causation study-style data set in rollover data analysis
(2010)
On 1 January 2005, The National Highway Traffic Safety Administration, an agency of the United States Department of Transportation, implemented a new data collection strategy designed to assess crash avoidance technologies and report associated behavioral inputs and outcomes. The original goal was a six-year program, however, during the shortened data collection period; it proved a valuable resource for understanding a precrash environment previously obscured by forensic case investigation. Another unintended consequence was an overlap with infrastructure, roadway geometry, and design with the occupant and vehicle outcomes, by virtue of well-defined attributes. External to the collected data, supplementary information was extrapolated, by using manuals published in the United States, by the American Association of State Highway Transportation Officials and selected State Departments of Transportation, in conjunction with the National Motor Vehicle Crash Causation Study (NMVCCS). This provided a backdrop to the infrastructure framework of the rollover problem within which the occupant and vehicle outcomes were studied. If a NMVCCS-style data collection were to be implemented elsewhere, then complementary manuals produced by federal transportation officials might be consulted producing similar relationships. The current study uses NMVCCS data to describe vehicles travelling through diverse design geometries and the outcome for occupants involved in crashes within that system. Codified and extrapolated data form the basis for assessing NMVCCS and its value to the transportation safety community, as the protocols are applicable universally. The benefit in continuing a NMVCCS-style study is noted, as the interaction of roadway infrastructure and occupant protection agencies might find paths to better work together in solving the complex rollover problem using a common data-driven approach.
The overall purpose of the ASSESS project is to develop a relevant and standardised set of test and assessment methods and associated tools for integrated vehicle safety systems, primarily focussing on currently available pre-crash sensing systems. The first stage of the project was to define casualty relevant accident scenarios so that the test scenarios will be developed based on accident scenarios which currently result in the greatest injury outcome, measured by a combination of casualty severity and casualty frequency. The first analysis stage was completed using data from a range of accident databases, including those which were nationally representative (STATS19, UK and STRADA, SE) and in-depth sources which provided more detailed parameters to characterise the accident scenarios (GIDAS, DE and OTS, UK). A common analysis method was developed in order to compare the data from these different sources, and while the data sets were not completely compatible, the majority of the data was aligned in such a way that allowed a useful comparison to be made. As the ASSESS project focuses on pre-crash sensing systems fitted to passenger cars, the data selected for the analysis was "injury accidents which involved at least one passenger car". The accident data analysis yielded the following ranked list of most relevant accident scenarios: Rank Accident scenario 1 Driving accident - single vehicle loss of control 2 Accidents in longitudinal traffic (same and opposite directions) 3 Accidents with turning vehicle(s) or crossing paths in junctions 4 Accidents involving pedestrians The ranked list highlights the relatively large role played by "accidents in longitudinal traffic", and "accidents with turning vehicle(s) or crossing paths in junctions" (the second and third most prevalent accident scenarios, respectively). The pre-crash systems addressed in ASSESS propose to yield beneficial safety outcomes with specific regard to these accident scenarios. This indicates that the ASSESS project is highly relevant to the current casualty crash problem. In the second stage of the analysis a selection of these accident scenarios were analysed further to define the accident parameters at a more detailed level .This paper describes the analysis approach and results from the first analysis stage.
This work aims at bringing evidence for mass incompatibility in frontal impact for cars built according to the UNECE R94 regulation. French national injury accidents database census for years 2005 to 2008 were used for the analysis. The heterogeneity of frontal self-protection among cars of different masses is investigated, as well as the partner protection parameter offered by these cars. The last part of the analysis deals with the estimation of the benefit, in terms of fatal and severe injuries avoided, if crashworthiness was harmonized for the whole fleet of vehicle. This calculation is done for France and is extended to all Europe.
Over the past two decades the popularity of consumer crash test programs, commonly referred to as New Car Assessment Programs (NCAP), has grown across the world. They are popular among government regulators as they afford a means of promoting safety innovations and levels of vehicle performance beyond those dictated by national standards. They also fulfill the demand for information regarding the safety ranking of vehicles among consumers contemplating the purchase of a new vehicle. There is no question that consumer crash test programs greatly influence vehicle design changes as well as accelerate the fitment of new safety features. The extent to which these changes can be expected to reduce serious and potentially fatal injuries will be influenced by how well the testing protocols and associated rating schemes correctly reflect the nature of the residual safety problem they seek to address. Drawing on data contained primarily in the US National Automotive Sampling System (NASS), the field relevance of current and proposed testing and rating protocols addressing frontal crash test protection is examined. Emphasis is placed on examining how accurately injury rates computed from the dummy responses measured in consumer crash tests correspond to actual injury rates observed in the field. Additional data from Canadian field investigations and US databases such as the National Motor Vehicle Crash Causation Survey (NMVCCS) are examined to see how well frontal airbag firing times, crush pulse durations and other determinants of injury are replicated in consumer testing protocols. This portion of the analysis draws on data obtained from Event Data Recorders (EDR) in both field collisions and staged tests of the same vehicle model. Vehicle rankings and overall frontal crash test ratings were found to be particularly sensitive to the choice of injury risk functions employed in the test. This was particularly true in the case of injury risk functions used to assess neck injury potential. Neck injury risk derived from Nij was found to show the least agreement with the field. Agreement between field chest injury rates and those derived from crash tests was improved considerably when chest injury risk functions for "older" occupants were employed. The paper concludes with a discussion of how different current testing protocols could be improved to enhance their field relevance.
In road traffic accidents, a car-seat and its occupant can be subjected to various crash pulses in the case of a rear impact. This study investigates the influence of crash pulse shape on seat-occupant response and evaluates the corresponding risk of whiplash injury. For this purpose, a rigorously validated seat-occupant system model is used to study different carseat designs and crash pulses. Two different car-seat concepts are also presented which can effectively mitigate whiplash injury for a wide range of crash severity. It is shown that for crash pulses of similar severity, the level of whiplash-risk depends strongly on the combined effects of seat design and crash pulse shape.
Event Data Recorder (EDR) is an additional function installed in airbag control module (ACM) to record vehicle and occupant information for a brief period of time before, during, and after a crash event. EDRs are now being installed in ACMs by several automakers in the USA and in Japan. The aim of this study is to understand the performance of EDRs for the improvement of accident reconstruction with more reliable information. In the first report of the study, data obtained from EDRs of seven vehicle types were evaluated using 2006-2007 J-NCAP (Japanese new car assessment program) full-lap frontal barrier crash tests and offset frontal deformable barrier crash tests data. For more practical standpoint, we conducted thirteen crash tests reconstructing typical real-world accidents such as single vehicle accidents with barriers or poles, car to car accidents and multi rear-end collisions focusing on Japanese typical accident types. Data obtained from EDRs are compared with data obtained from optical speed sensor, instrumented accelerometers and high speed video cameras. The velocities determined from pre-crash data of EDRs and the maximum change in velocity, delta-V, and delta-V time history data obtained from post-crash data of EDRs are analyzed. The results are as follows: - Pre-crash velocities of EDRs were very accurate and reliable. An average difference between the EDR recording values and reference speeds was 4.2% and a root mean square of the differences was 9.2%. Only two cases resulted large differences for the pre-crash velocity. Both of them were cases with braking prior to the collision. However, another test with braking resulted less difference. The braking condition may influence accuracy of pre-crash velocities. - Maximum delta-Vs obtained from the EDRs showed uncertainty of measurement in several cases in comparisons with the reliable delta-V data. The differences in maximum delta-V were more than 10% in five of twenty-five events data and more than 20% in two of twenty-five events data. An average of the all differences was about 4% and root mean square of the differences was about 11%. Especially large deformation at narrow area may influence accuracy of post-crash delta-V. - Multiple rear-end crash tests were reconstructed using EDRs data as case studies. Some EDRs recorded two events and a time gap between two events, so that these reconstruction case studies were very accurate and reliable. - If though only one of three vehicles in multiple rear end crash was equipped EDR, overview and velocities of all cars may be reconstructed using these limited EDR data. In this case study, leading car- EDR data and middle car- EDR data were valuable. However if only following car was equipped EDR, the reconstruction was not accurate
Estimation of the benefits for the UK for potential options to modify UNECE Regulation No. 95
(2010)
The side impact problem in Europe remains substantial. UK data shows that between 22% and 26% of car occupant casualties are involved in a side impact, but this rises to between 29% and 38% for those who are fatally injured. This indicates the more injurious nature of side impacts compared with frontal impacts. The European Enhanced Vehicle safety Committee (EEVC) has performed work to address the side impact issue since 1979. As part of its continuing work, it has recently investigated potential options for regulatory changes to improve side impact protection in cars further. To support this work the UK undertook an analysis to estimate the benefit for potential options to modify UNECE Regulation 95. The analysis used the UK national STATS19 and detailed Co-operative Crash Injury Study (CCIS) accident databases. Of the potential options reviewed, it was found that the addition of a pole test offered the greatest benefit.
An analysis of NASS and FARS was conducted to determine crash conditions that involved injuries that are not currently being directly addressed by vehicle safety standards or by consumer information test protocols. Analysis of both field data and US NCAP tests were conducted to determine the relative safety provided by seating position and by vehicle model year. Opportunities for improvements were determined by crash categories with large populations of injuries that were not addressed by safety tests or smaller numbers that were increasing in frequency. Areas of opportunities include improved occupant restrain in rollovers, improved frontal protection for rear seat occupants and improved fire prevention in frontal and rollover crashes.