Sonstige
Filtern
Erscheinungsjahr
- 2017 (119) (entfernen)
Dokumenttyp
- Konferenzveröffentlichung (52)
- Buch (Monographie) (48)
- Wissenschaftlicher Artikel (12)
- Bericht (5)
- Teil eines Buches (Kapitel) (2)
Schlagworte
- Deutschland (77)
- Germany (77)
- Conference (38)
- Forschungsbericht (38)
- Konferenz (37)
- Research report (37)
- Accident (28)
- Unfall (28)
- Bewertung (24)
- Evaluation (assessment) (23)
In this study, we compared the injury severity of occupants according to the seating position and the crashing direction in motor vehicle accidents. In the driver's point of view, it was separated the seating position as "Near-side" and "Far-side". The study subjects were targeted by people who visited 4 regional emergency centers following motor vehicle accidents. Real-world investigation was performed by direct and indirect methods after patient- consent. The information of the damaged vehicle was informed by Collision Deformation Classification (CDC) code and the information of the injury of patients was informed by using the Abbreviated Injury Score (AIS) and Injury Severity Score (ISS). When the column 3 in CDC code was P, damaged at the middle part of lateral side, the average point of AIS 3 was 1.91-±1.72 in near-side and 1.02-±1.31 in far-side (p<0.01). The average point of maximum AIS (MAIS) was 2.78-±1.39 in near-side and 2.02-±1.11 in far-side (p<0.01). The average point of ISS was 15.74-±14.71 in near-side and 8.11-±8.39 in far-side (p<0.01). Also, when the column 3 in CDC code was D, damaged at the whole part of lateral side, it was significant that the average point of AIS 3 and MAIS in near-side was bigger than in far-side (p=0.02).
A study on knowledge and practices of first aid and CPR among police officers in Colombo and Gampaha
(2017)
Around 85% of deaths in developing countries have been found to be due to road traffic accidents (RTAs), which cost the countries around 1-2% of their gross national product (GNP). In Sri Lanka there were 2,436 deaths reported from 36,045 RTAs in 2014. This study aimed at assessing first aid and cardiopulmonary resuscitation (CPR) knowledge among police officers and identifying its relationship to their first aid and CPR practices. A study was done on 493 police officers from Colombo and Gampaha who were selected using convenience sampling through a self-administered questionnaire. The results showed that the police officers had unsatisfactory knowledge and practices of CPR and interventions for bleeding and fractures. These should therefore be focused in their further training.
Es wurde nach aktueller Literatur zum Thema recherchiert und diese beschafft. Insbesondere wurden die für die Aufgabenstellung relevanten Dokumente der Arbeitsgruppe "Particle Measurement Programme" (PMP) ausgewertet. Das Suchergebnis bestand aus ca. 200 Literaturhinweisen. Davon wurden anhand der Titel und der Kurzfassungen die im Literaturnachweis des Hauptberichtes aufgeführten Publikationen ausgewählt und ausgewertet. Die wesentlichen Ergebnisse in komprimierter Form können wie folgt dargestellt werden: Neben den Auspuffemissionen nehmen beim Verkehr die Partikelemissionen infolge der Abriebe sowie der fahrzeuginduzierten Aufwirbelung, also die Nicht-Abgas Partikelemissionen, eine entscheidende Rolle ein. Häufig werden diese auch als Aufwirbelungs- und Abriebemissionen (AWAR) bezeichnet. Die Abriebe können dabei als direkte Emissionen wirken aber auch durch eine Zwischendeposition das Aufwirbelungspotenzial erhöhen. Die ausgewerteten Literaturen zeigen zudem auf, dass sehr komplexe Abhängigkeiten für die Partikelgrößen und die Menge emittierter Partikel infolge der Abriebe beobachtet wurden. Es sind verschiedene Tracersubstanzen für Reifen- und Bremsabrieb bekannt. Kupplungsabrieb scheint keine Relevanz zu haben. Toxikologische Untersuchungen weisen auf gesundheitliche Wirkungen der Abriebe hin, ohne dass es nach Ansicht der Autoren derzeit einen direkten (kausalen) Nachweis gibt. Es werden Reifenabrieben geringere nachteiligere Gesundheitseffekte zugesprochen als anderen Partikelanteilen (vor allem durch Dieselpartikel). Es wurde u.a. eine qualitative tabellarische Übersicht über die verfügbaren Messmethoden zur AWAR Messung erstellt. In dieser Tabelle wurden für die Bewertung jeweils die bestmöglichen Anwendungen zu Grunde gelegt. Zusammenstellungen von Partikelmessungen mit entsprechender Quellenangabe werden ebenso gegeben wie Bandbreiten von Partikelemissionsfaktoren.
Weiterführende Untersuchungen zur Beurteilung des Adhäsionsverhaltens zwischen Bitumen und Gestein
(2017)
Die Dauerhaftigkeit der Straßen hängt maßgeblich vom Haftverhalten zwischen dem Bitumen und der Gesteinskörnung ab. Seit Jahrzehnten wird das Haftverhalten unterschiedlicher Gesteine und Bitumen mit diversen Prüfverfahren untersucht. Eine Quantifizierung der Einflussfaktoren konnte bisher nicht erreicht werden, jedoch hat das Gestein nach den Ergebnissen des AiF-Forschungsprojektes IGF 16639N einen größeren Einfluss auf die Adhäsion als das Bitumen [RADENBERG et al., 2014]. Im Rahmen dieses Projektes soll die Komponente Gestein genauer untersucht werden und der Einfluss der verschiedenen Gesteinseigenschaften auf die Adhäsion quantifiziert werden. Ein Fokus der Forschungsaufgabe ist dabei, zu untersuchen, ob der Parameter Zeta-Potential dazu dienen kann, die Wechselwirkung zwischen Bitumen und Gesteinsaggregaten zu beschreiben. Aus der Literatur geht hervor, dass niedrige Potenzialdifferenzen zwischen Bitumen und Gestein auf eine gering wirksame adhäsive Bindung / elektrostatische Wechselwirkung hindeuten und z.B. bei gleichsinniger Ladung sogar zur gegenseitigen Abstoßung von Gesteinsoberfläche und Bitumenmolekülen führen. Die Untersuchungen von [LABIB, 1992] zeigen, dass Bitumenemulsionen negative Zeta-Potentiale aufweisen. Bei den Rolling-Bottle-Versuchen konnte ein signifikanter Einfluss der Gesteinseigenschaften insbesondere des Zeta-Potentials und des Ca-Anteils der löslichen Salze auf den Umhüllungsgrad festgestellt werden. Der Schüttelabriebversuch hat sich mit den hier gewählten Randbedingungen als ungeeignet für die Quantifizierung möglicher Einflussfaktoren erwiesen. Ebenso konnten mit der Tropfenkonturanalyse weder Einflüsse aus den Gesteinseigenschaften noch aus den Bitumeneigenschaften als maßgeblich quantifiziert werden. Dennoch kann grundsätzlich eine Aussage über das Haftverhalten zwischen Bindemittel und Gestein getroffen werden. Weiterhin kann die Wirkung von Wasser auf das Haftverhalten messtechnisch erfasst werden. Die Versuche zur Haftgrenztemperatur zeigen, dass der pH-Wert des Wassers einen Einfluss auf die Haftgrenztemperatur (HGT) ausübt. Mit abnehmenden pH-Wert sinkt bei dem Diabas und der Grauwacke das Zeta-Potential (Betrag). Je höher das Zeta-Potential (Betrag) ist, desto geringer ist die Haftgrenztemperatur.
Injury probability functions for pedestrians and bicyclists based on real-world accident data
(2017)
The paper is focusing on the modelling of injury severity probabilities, often called as Injury Risk Functions (IRF). These are mathematical functions describing the probability for a defined population and for possible explanatory factors (variables) to sustain a certain injury severity. Injury risk functions are becoming more and more important as basis for the assessment of automotive safety systems. They contribute to the understanding of injury mechanisms, (prospective) evaluation of safety systems and definition of protection criteria or are used within regulation and/or consumer ratings. In all cases, knowledge about the correlation between mechanical behavior and injury severity is needed. IRFs are often based on biomechanical data. This paper is focusing on the derivation of injury probability models from real world accident data of the GIDAS database (German In-depth Accident Study). In contrast to most academic terms there is no explicit term definition or definition of creation processes existing for injury probability models based on empirical data. Different approaches are existing for such kind of models in the field of accident research. There is a need for harmonization in terms of the used methods and data as well as the handling with the existing challenges. These are preparation of the dataset, model assumptions, censored/unknown data, evaluation of model accuracy, definition of dependent and independent variable, and others. In the presented study, several empirical, statistical and phenomenological approaches were analyzed regarding their advantages and disadvantages and also their applicability. Furthermore, the identification of appropriate prediction parameters for the injury severity of pedestrians has been considered. Due to its main effect on injuries of pedestrians and bicyclists, the importance of the secondary impact has also been analyzed. Finally, the model accuracy, evaluated by several criteria, is the rating factor that gives the quality and reliability for application of the resulting models. After the investigation and evaluation of statistical approaches one method was chosen and appropriate prediction variables were examined. Finally, all findings were summarized and injury risk functions for pedestrians in real world accidents were created. Additionally, the paper gives instructions for the interpretation and usage of such functions. The presented results include IRFs for several injury severity levels and age groups. The presented models are based on a high amount of real world accidents and describe very well the injury severity probability of pedestrians and bicyclists in frontal collisions with current vehicles. The functions can serve as basis for the evaluation of effectiveness of systems like Pedestrian-AEB or Bicycle-AEB.
DURNER würdigt in seinem einleitenden Beitrag den langjährigen Vorsitzenden des Arbeitskreis Straßenrecht Prof. Dr. Willi Blümel, der am 22. August 2015 verstarb. Willi Blümel hatte die Geschäfte des 1958 gegründeten Arbeitskreises im Jahr 1976 von Prof. Klaus Obermayer übernommen und den Kreis bis 2006 " also über drei Jahrzehnte " geleitet und in einzigartiger Weise geprägt. HILLGRUBER untersucht die Vereinbarkeit der Einführung einer Infrastrukturabgabe für Kraftfahrzeuge mit einem zulässigen Gesamtgewicht von bis zu 3,5 Tonnen auf dem deutschen Bundesfernstraßennetz mit dem Recht der Europäischen Union. Nach seiner Auffassung stellt eine solche Abgabe auch in der Kombination mit entsprechenden Freigrenzen bei der Kfz-Steuer, in deren Genuss tatsächlich nur Halter von im Inland zugelassenen Kfz kommen, keine mittelbare Diskriminierung aus Gründen der Staatsangehörigkeit dar. Ebenso verstoße das Vorhaben weder gegen Art. 92 AEUV noch gegen die Grundfreiheiten oder das allgemeine Diskriminierungsverbot des Art. 18 Abs. 1 AEUV. LINKE behandelt neue Entwicklungen bei öffentlich-privaten Partnerschaften im Bereich der Bundesfernstraßen. Solche Projekte seien zwar nicht unumstritten, ermöglichten jedoch eine schnellere und effizientere Umsetzung von notwendigen Straßenbaumaßnahmen. Das Bundesministerium für Verkehr und digitale Infrastruktur setzte sich daher für weitere öffentlich-private Partnerschaften im Bundesfernstraßenbereich ein. Der analytische Beitrag von HELD untersucht umweltrechtliche Verfahrensfehler im Lichte der neuesten Rechtsprechung. Die durch ihn untersuchten Vorgaben der UVP-Richtlinie und der Aarhus-Konvention verlangen nach Anpassungen des nationalen Verwaltungsprozessrechts. Diese Anpassungen können unter weitgehender Beibehaltung des überkommenen Systems des Individualrechtsschutzes durch eine Erweiterung der Verbandsklagebefugnis erbracht werden. Der abschließende Beitrag von DEUTSCH untersucht die aktuelle Bedeutung der europäischen Umweltfachplanungen fär das Straßenrecht am Beispiel der Luftreinhalte- und Lärmaktionsplanung. Er gelangt zu dem Befund, dass die rechtlichen Zusammenhänge zwischen Umweltfachplanungen und Vollzug und damit auch im Verhältnis zum Straßen- und Straßenverkehrsrecht in vieler Hinsicht noch der Klärung und Justierung bedürfen. Klärungsbedürftig sei insbesondere die Frage, unter welchen Voraussetzungen und mit welcher Reichweite die Träger der Umweltfachplanung die Zuständigkeiten der Vollzugsbehörden an sich ziehen dürfen.
Powered Two Wheeler (Motorcycle) crashes are overrepresented in EU, England, and United States casualty statistics for both fatal and serious injuries. While regional geographic differences are evident for motorcycle size, type, and engine displacement, the casualty statistics consistently indicate significantly higher injury rates for all motorcycle riders when compared to car occupants. Accident analysis and reconstruction of these motorcycle crashes is a necessary process to gain further understanding of potential injury mitigation strategies. This paper focuses on the analysis of the rider post impact trajectory in the immediate moments following a crash. The rider and motorcycle, while loosely coupled by seating position leading up to a crash, quickly decouple as the crash forces develop. As a result, the rider moves relative to the motorcycle and relative to the collision partner. This movement, or trajectory, is primarily influenced by the type and configuration of the impact, the type and configuration of the motorcycle and collision partner, and the speeds involved. Understanding the rider's post impact trajectory will assist in the development of injury mitigation strategies. Both the free flight trajectory of the rider and the rider's trajectory as influenced by interaction with the motorcycle and collision partner are examined. Rider trajectories in full scale crash testing and real world motorcycle crashes are both studied and presented. The resulting physical evidence that can be observed by an accident analyst is discussed. The application of projectile motion physics is analyzed and the necessary input parameters, such as initial launch angle, are studied. This study will assist in understanding the post-impact dynamics of a motorcyclist, and will provide useful information to analysts evaluating real world crashes.
Bus or heavy vehicle passenger accidents are rare events, compared with car accidents, but sometimes leads to a large number of victims especially in rollover crash scenarios. Two accidents occurred in Portugal in 2007 and 2013 in which 28 people died and more than 50 are injured, shown the importance of the investigation of such accidents. For the investigation of these accidents multidisciplinary teams are constituted with engineers and police officers. All the factors involved are taken into consideration including road design, traffic signs, maintenance and hardware, human factors, and vehicle factors. In this work a methodology to an accurate collection of the data is proposed. From the information collected the accident is reconstructed using the PC-CrashTM software. From this all the contribution factors are determined and recommendations to mitigate these crashes are listed. These two accidents are rollover accidents and the analysis of the injuries and its correlation with the use of retention systems is very important. From the medical data and with the dynamics of the accident determined simulations of the occupants with biomechanical models are carried out in order to evaluate the effect of the retention systems in the injuries. This analysis is based on injury criteria (such as Abbreviated Injury Score (AIS) or Injury Severity Scale (ISS)). With this it is possible to determine if the seat belt was worn or not.
For the determination of the road surface roughness common methods have been established, like Skid Resistance Tester (SRT) or the Sideway-force Coefficient Routine Investigation Machine (SCRIM). Both methods are used to measure a comparable and reliable maximum friction potential value and to assess the quality of the road surface. However, the comparison of the measurements under real conditions and the results of measurements with SRT and SCRIM showed only minor correlations. The paper shows the comparison between these standardised methods and real vehicle braking tests and discusses the results.
The objectives of this paper are the analysis of the accident risk of drivers brain pathologies (Mild Cognitive Impairment, Alzheimer- disease, and Parkinson- disease), and the investigation of the impact of driver distraction on the accident risk of patients with brain pathologies, through a driving simulator experiment. The three groups of patients are compared to a healthy group of similar demographics, with no brain pathology. In particular, 125 drivers of more than 55 years old (34 "controls"" and 91 "patients") went through a large driving simulator experimental process, in which incidents were scheduled to occur. They drove in rural and urban areas, in low and high traffic volumes and in three distraction conditions (undistracted driving, conversation with a passenger and conversation through a mobile phone). The statistical analyses indicated several interesting findings; brain pathologies affect significantly accident risk and distraction affects more the groups of patients than the control one.
Motorcycle crashes in Austria: Analysis of causes and contributing factors based on in-depth data
(2017)
From CEDATU, the in-depth accident database run by the Vehicle Safety Institute at Graz University of Technology, a representative sample of 101 crashes involving at least one motorcycle was selected. The analysis focused on causes for crashes as well as on contributing factors, but also included parameters of road, riders and vehicles. Own riding speed and "unexpectable action by another road user" were the most frequent causes for accidents. Inappropriate safety distance or delayed reaction were frequent, both as causation factors and as contributing factors. Infrastructure issues never cause an accident, but they are very frequent as contributing factors; road geometry and road guidance are by far most frequent among these. This paper also discusses accidents by type and other parameters (e.g. injury severity by body region, collision speed, age and others), and compares accident causes to previous studies as well as the police reported accident statistics.
The Decision Support System (DSS) is one of the key objectives of the European co-funded research project SafetyCube in order to better support evidence-based policy making. Results will be assembled in the form of a DSS that will present for each suggested road safety measure: details of risk factor tackled, measure, best estimate of casualty reduction effectiveness, cost-benefit evaluation and analytic background. The development of the DSS presents a great potential to further support decision making at local, regional, national and international level, aiming to fill in the current gap of comparable measures effectiveness evaluation. In order to provide policy-makers and industry with comprehensive and well-structured information about measures, it is essential that a systems approach is used to ensure the links between risk factors and all relevant safety measures are made fully visible. The DSS is intended to become a major source of information for industry, policy-makers and the wider road safety community.
In most of developed countries, the progress made in passive safety during the last three decades allowed to drastically reduce the number of killed and severely injured especially for occupants of passenger cars. This reduction is mainly observed for frontal impacts for which the AIS3+ injuries has been reduced about 52% for drivers and 38% for front passengers. The stiffening of the cars' structure coupled with the generalization of airbags and the improvement of the seatbelt restraint (load limiter, pretension, etc.) allowed to protect vital body regions such as head, neck and thorax. However, the abdomen did not take advantage with so much success of this progress. The objective of this study is to draw up an inventory on the abdominal injuries of the belted car occupants involved in frontal impact, to present adapted counter-measures and to assess their potential effectiveness. In the first part the stakes corresponding to the abdominal injuries will be defined according to types of impact, seat location, occupants' age and type of injured organs. Then, we shall focus on the abdominal injury risk curves for adults involved in frontal impact and on the comparisons of the average risks according to the seat location. In the second part we will list counter-measures and we shall calculate their effectiveness. The method of case control will be used in order to estimate odds ratio, comparing two samples, given by occupants having or not having the studied safety system. For this study, two type of data sources are used: national road injured accident census and retrospective in-depth accident data collection. Abdominal injuries are mainly observed in frontal impact (52%). Fatal or severe abdominal occupant- injuries are observed at least in 27% of cases, ranking this body region as the most injured just after the thorax (51%). In spite of a twice lower occupation rate in the back seats compared to the front seats, the number of persons sustaining abdominal injuries at the rear place is higher than in the front place. In recent cars, the risk of having a serious or fatal abdominal injury in a frontal impact is 1.6% for the driver, 3.6% for the front passenger and 6.3% for the rear occupants. The most frequently hurt organs are the small intestine (17%), the spleen (16%) and the liver (13%). The most common countermeasures have a good efficiency in the reduction of the abdominal injuries for the adults: the stiffness of the structure of the seats allows decreasing the abdominal injury risk from 54% (driver) to 60% (front occupant), the seatbelt pretensioners decrease also this risk from 90% (driver) to 83% (front passenger).
Driver distraction
(2017)
This report for the Institute of Advanced Motorists (IAM) summarises recent research and knowledge from scientific studies about distracted driving. The report defines what it means to be "distracted" when driving, discusses the impact of distraction on driver behaviour and safety, and what can be done to reduce distracted driving. The focus of distraction discussed here relates to how drivers engage with technology when driving. The report begins with a background to driver distraction, followed by discussion about what is actually meant by driver distraction. It is then considered why humans cannot successfully do two things at the same time, particularly within the context of driving. The subsequent section summarises the scientific research findings to date with regard to driver distraction and technology, and how this affects different types of road user. Recommendations for how driver distraction can be mitigated in the real world and a summary conclude the report. Responses to common questions raised by drivers are presented in Appendix A.
This work describes the results of the experimental activity, illustrating the driving behavior observed in different conditions, relating them to the different methods of ADAS intervention and comparing the driver behavior without ADAS. In the present study, driver behavior was studied in road accidents involving elderly pedestrians, with different ADAS HMIs, as a base to develop a driver model in near missing pedestrian accidents. A literature research was conducted with the aim of finding out the main influencing factors, including environment, boundary conditions, configuration of impact, pedestrian and driver information, when pedestrian fatalities occur and an analysis of frequent road accidents was conducted to get more detailed information about the driver- behavior. In order to obtain more detailed information about pedestrian accidents, real road accidents were reconstructed with multibody simulations on PC-Crash and, by the comparison between literature findings and reconstructions, a generic accident scenario was defined. The generic accident scenario was implemented on the full scale dynamic driving simulator in use at the Laboratory for Safety and Traffic Accident Analysis (LaSIS, University of Florence, Italy) in order to analyse the driving behaviors of volunteers, also considering the influence of ADAS devices. Forty-five young volunteers were enrolled for this study, resulting in forty valid tests on different testing scenarios. Two different scenarios consisted in driving with or without ADAS in the vehicle. Different kinds of ADAS, acoustic and optical, with different time of intervention were tested in order to study the different reactions of the driver. The tests showed some interesting differences between driver's behavior when approaching the critical situation. Drivers with ADAS reacted earlier, but more slowly, depending also on the type of alarm, and often with double reaction when braking. In fact, the results of the activity showed that with ADAS intervention the time to collision (TTC) increases, but the reaction time and braking modality change: a) there is a sort of "latency" time between the accelerator pedal release and the brake pressure; b) the brake pressure is initially less intense. So the driver only partially takes advance from the TTC increase. These differences were valued not only qualitatively, but quantitatively as well. This work revealed to be useful to improve the knowledge of drivers" behavior, in order to realize a driver model that can be implemented to help attaining and assessing higher levels of automation through new technology.
Bankettmaterialien müssen zwei Anforderungen erfüllen, die von verschiedenen Bestandteilen der Böden gewährleistet werden. Aufgrund der Verkehrssicherheit müssen sie eine dauerhaft hohe Tragfähigkeit aufweisen, damit von der Fahrbahn abkommende Fahrzeuge nicht einsinken und verunfallen. Die Tragfähigkeit und Standfestigkeit der Böden wird hauptsächlich durch den Kiesanteil der Böden erreicht. Da im Bereich des Banketts Straßenoberflächenwasser versickert, müssen sie andererseits ein möglichst hohes Schadstoffrückhalte- und -bindevermögen aufweisen, um den Untergrund und das Grundwasser zu schützen. Dies wird durch die Sand- und Feinanteile der Böden erreicht. Bei den bestehenden Bauweisen besteht nach Auffassung einiger Straßenbauverwaltungen der Länder ein Optimierungsbedarf. Im Rahmen dieser Forschungsarbeit sollten diese Bauweisen überprüft und ggf. weiter entwickelt werden, um noch stärker den bau-, als auch den umwelttechnischen Ansprüchen gerecht zu werden. Dabei werden die Bankette aus einem Gemisch von Gesteinskörnungen bzw. rezyklierten Baustoffen der Körnung 0/32 mm mit Feinkorn bzw. Oberboden hergestellt. Geeignete Zusammensetzungen waren durch Untersuchungen im Labor- und Technikumsmaßstab zu ermitteln. 18 Gemische von Gesteinskörnungen und Baustoffen der Körnung 0/32 mm mit unterschiedlichen Feinkorn- bzw. Oberbodenanteilen wurden in Bezug auf ihre Tragfähigkeit (CBR-Versuche) und Durchlässigkeit im Labor untersucht. Unter Berücksichtigung der Laborergebnisse wurden im Technikumsmaßstab Versuche mit vier Mischungen zur Ermittlung der Tragfähigkeit und des Verformungsverhaltens mittels statischen und dynamischen Verformungsmoduln durchgeführt. Basierend auf den Versuchsergebnissen sollte der Feinkornanteil der Bankettmaterialien einen Wert von 15 M.-% nicht übersteigen. Mit solchen Materialien sollte ein Verformungsmodul Ev2 ≥ 60 MN/m2 bzw. Evd ≥ 30 MN/m2 bei einem Verdichtungsgrad von DPr = 100 % sicher erreichbar sein. Falls eine höhere Tragfähigkeit für Bankette erforderlich ist, sollte der Feinkornanteil der Materialien ggf. weiter beschränkt werden.
From an automotive safety occupant protection standpoint, effective occupant restraint requires a system capable of providing non-injurious occupant ride down of anticipated crash forces. This is not only the case for frontal collisions, where occupant restraint is provided primarily by seatbelts and airbags, but is also critical for other crash modes such as side impacts, rear impacts, rollovers, as well as multiple impact events. In the rear impact crash mode, occupant restraint is provided primarily by the seatbacks and to some extent the seatbelts. Foundationally, therefore, what becomes fundamental to the seatback's role in rear occupant protection is its ability to contain the occupant within the seat, preventing occupant ramping, as well as preventing the seat's, and/or its occupant's, dangerous intrusion into the rear occupant's survival space where contact with rear compartment components and/ or rear seated occupants can present a significant injury risk. An analysis is presented of a series of rear impact sled testing conducted by the authors that evaluates the timing, position and extent of the front seatback's reward displacement toward and into the rear occupant compartment as well as consideration of the front seat occupant' ramping potential and its injury potential relative to the rear compartment. Additionally, three other series of testing are presented which assess various seat designs occupant retention capabilities. Lastly, a matched-pair comparison test series is presented which evaluates occupant motion in rear impact with and without use of a typical vehicle body mounted 3-point seatbelt. Discussion of restraint system performance observed in all the testing is included along with ATD biofidelity and thigh-gap considerations. The data collected and presented includes accelerometer instrumentation and high speed video analysis.
Die Bemessung von Verkehrsanlagen erfolgt üblicherweise anhand einer bestimmten Spitzenstunde (n-te Stunde). In Deutschland wird dafür bislang die 30. Stunde der Dauerlinie der Verkehrsnachfrage zugrunde gelegt. Im Rahmen der Untersuchung wurden die Eignung der 30. Stunde als Bemessungsgrundlage geprüft und alternative Bemessungskonzepte analysiert. Für 50 Messquerschnitte von Bundesautobahnen wurden anhand einer stochastischen Ganzjahresanalyse mit dem Simulationsprogramm KAPASIM staubedingte Fahrtzeitverluste ermittelt. In Verbindung mit den jeweiligen Fahrtzweckanteilen und den entsprechenden Zeitkostensätzen wurden so für jede Stunde des Jahres volkswirtschaftliche Zeitkosten berechnet. Darüber hinaus wurde der Zusammenhang zwischen dem Auslastungsgrad und den überlastungsbedingten Zeitverlusten durch eine Modellfunktion beschrieben. Bei vorwiegend von Urlaubs- und Freizeitverkehr geprägten Strecken entsteht der Großteil der staubedingten Zeitkosten in den 30 höchstbelasteten Stunden des Jahres. Bei Strecken mit überwiegendem Pendlerverkehr treten dagegen auch jenseits der 300. Stunde noch Zeitverluste auf, der Anteil der überlastungsbedingten Zeitkosten in den ersten 30 Stunden der Dauerlinie beträgt zwischen ca. 40 bis 80 %. Für die Wahl des in der Bemessungsstunde relevanten Schwerverkehrsanteils wird der Median im Bereich der (n " 5)-ten bis (n + 5)-ten Stunde der Dauerlinie der Verkehrsnachfrage empfohlen. Für alternative Bemessungskonzepte konnten im Ergebnis der Untersuchung keine Vorteile im Vergleich zum Ansatz der n-ten Stunde festgestellt werden. Hinsichtlich der Wahl einer n-ten Stunde ergeben sich nur geringe Unterschiede zwischen der 30. und der 50. Stunde, so dass im Sinne einer Harmonisierung der europäischen Bemessungsverfahren ein Wechsel von der 30. zur 50. Stunde erwogen werden kann.
Zusammenhang zwischen Bitumenchemie und straßenbautechnischen Eigenschaften : Literaturrecherche
(2017)
Anforderungen an Bitumen werden in den TL Bitumen-StB 07 primär an relativ einfache, physikalische Kennwerte gestellt. Trotz der entscheidenden Einflüsse der chemischen Zusammensetzung auf das Bitumen, werden praktisch keine Anforderungen an die chemische Zusammensetzung gestellt. Ein wesentlicher Grund hierfür ist die Komplexität und die Vielfalt in der chemischen Zusammensetzung von Bitumen. Auf internationaler Ebene wurden in den letzten Jahren und Jahrzehnten große Anstrengungen unternommen, den chemischen bzw. kolloidalen Aufbau des Bitumens und dessen Einfluss auf die straßenbautechnischen Eigenschaften zu erfassen. Aufgrund der Vielfalt unterschiedlichster Kohlenwasserstoffverbindungen, die zu einem Großteil mit Heteroatomen wie Schwefel, Stickstoff, Sauerstoff oder Metallen ergänzt werden, ist eine exakte Elementaranalyse sehr aufwändig und wenig aussagekräftig. Daher hat sich die chemisch-physikalische Beschreibung des Bitumens als Kolloidsystem als grundsätzlich anerkannt erwiesen. Eine Aufteilung in eine feste Phase, die Asphaltene, und eine fließfähige Phase, die Maltene, ist hierbei unstrittig. Jedoch gibt es deutlich voneinander abweichende Ansichten zum Aufbau, zum Verhalten und zu den Eigenschaften der Asphaltene und Harze. Diese Fragestellung kann möglicherweise durch eine verbesserte Analyse der Bitumenstruktur beispielsweise mittels Rasterkraftmikroskop (AFM) oder Röntgen/Neutron"Kleinwinkelstreuung (SAXS, SANS) gelöst werden. Der Asphaltengehalt übt die offensichtlich deutlichsten Einflüsse auf die straßenbautechnischen Eigenschaften aus. So nimmt der Verformungswiderstand mit zunehmendem Asphaltengehalt deutlich zu. Darüber hinaus beeinflussen die Heteroatome die Bitumeneigenschaften. Sowohl das Adhäsionsverhalten (durch den Einfluss auf die Polarität) als auch die Viskosität wird durch die Heteroatome beeinflusst. Da der genaue Einfluss der Heteroatome noch nicht geklärt ist, bietet neben der Rolle der Asphaltene und Harze auch der Einfluss der Heteroatome auf die straßenbautechnischen Eigenschaften weitere Forschungsansätze.
Twenty-eight percent of traffic accidents in Japan are rear-end collisions, and of these, 13% are multiple collisions (three or more vehicles and/or roadside objects). A post-crash braking system enables the driver to stop the vehicle in a short distance after a rear-end collision to prevent secondary collisions. In this study, the effectiveness of a post-crash braking system was examined using a drive recorder database. In 64% of rear-end collisions, the driver's braking was interrupted after the collision. The stopping distance was estimated with time data from the drive recorder. We predict that the brake assist would be effective in preventing secondary collisions in 21% of cases.