Sonstige
Refine
Year of publication
- 2010 (74) (remove)
Document Type
- Conference Proceeding (48)
- Book (24)
- Working Paper (2)
Has Fulltext
- yes (74) (remove)
Keywords
- Conference (45)
- Konferenz (45)
- Accident (30)
- Unfall (29)
- Deutschland (28)
- Germany (28)
- Forschungsbericht (23)
- Research report (23)
- Injury (19)
- Verletzung (19)
This work aims at bringing evidence for mass incompatibility in frontal impact for cars built according to the UNECE R94 regulation. French national injury accidents database census for years 2005 to 2008 were used for the analysis. The heterogeneity of frontal self-protection among cars of different masses is investigated, as well as the partner protection parameter offered by these cars. The last part of the analysis deals with the estimation of the benefit, in terms of fatal and severe injuries avoided, if crashworthiness was harmonized for the whole fleet of vehicle. This calculation is done for France and is extended to all Europe.
Die Abwasserentsorgung von unbewirtschafteten Autobahnrastanlagen mit sanitären Einrichtungen (sogenannte PWC-Anlagen) stellt eine Besonderheit dar. Aufgrund ihrer oftmals großen Entfernung ist der Anschluss an öffentliche leitungsgebundene Infrastruktur schwierig. Weiterhin ist zu beachten, dass das Abwasser nach seiner stofflichen Zusammensetzung nicht dem häuslichen Abwasser entspricht. Ziel des Projektes war es, Grundlagen veralteter Planungshilfen bezüglich der Abwasserentsorgung von PWC-Anlagen unter Berücksichtigung vorhandener Erfahrungswerte sowie des wissenschaftlich-technischen Fortschritts zu aktualisieren. Es wurden 12 Messkampagnen an 6 deutschlandweit ausgewählten PWC-Anlagen durchgeführt, um die abwasserseitige Belastungssituation an PWC-Anlagen darzustellen. Dabei wurden aktuelle Daten zu anfallenden Abwasserfrachten für die Parameter CSB, TKN und Pges ermittelt. Aus den dokumentierten Wasserverbrauchsdaten und dem Filtratanfall konnte eine Angabe zum nutzerspezifischen Wasserverbrauch beziehungsweise Abwasseranfall gemacht werden. Dieser ist von der Sanitärtechnik sowie dem Umfang der Reinigung abhängig und von PWC-Anlage zu PWC-Anlage verschieden. Zusammen mit dem nutzerspezifischen Abwasseranfall können die ermittelten Abwasserfrachten als belastbare Bemessungsparameter in Planungs- und Entscheidungshilfen zur Abwasserentsorgung an PWC-Anlagen Eingang finden. Im Abwasser von PWC-Anlagen liegt eine wesentlich höhere Stickstofffracht gegenüber dem Angebot an organischen Stoffen vor, was durch einen hohen Urinanteil begründet ist und eine biologische Behandlung erschwert. Als ein Lösungsansatz dient die Separation von Urin. Neben der dezentralen Behandlung bestehen zur Abwasserentsorgung die Grundvarianten Überleitung in eine zentrale Kläranlage und Sammeln in einer abflusslosen Grube. Aus verfahrenstechnischen Gründen wird das Überleiten favorisiert. Die Variante ist aus wirtschaftlichen Gesichtspunkten nicht immer sinnvoll. Der Betrieb von Abwasseranlagen sollte in die Verantwortung des zuständigen Abwasserentsorgers oder eines großen privaten Betreibers gegeben werden. Neben dem Abschlussbericht wurde ein Leitfaden als Planungs- und Entscheidungshilfe bezüglich der Abwasserentsorgung an PWC-Anlagen unter Berücksichtigung rechtlicher, technischer und wirtschaftlicher Aspekte erstellt.
Zentrale Zielsetzung dieses Forschungsvorhabens ist die Ableitung einer Grundlage für die quantitative Abschätzung der Sicherheitswirkungen verschiedener Bau-, Gestaltungs- und Betriebsformen von Landstraßen. Hierzu wurden erreichbare Unfallraten und Unfallkostenraten von Landstraßen differenziert nach Ausbaustandard und Betriebsformen abgeleitet. Die Unfallkenngrößen wurden dabei getrennt für die drei Teilbereiche eines Landstraßenzuges (freie Streckenabschnitte, Einflussbereiche von Knotenpunkten, Knotenpunkte) ermittelt. Während die mittlere Unfallkostenrate eines Untersuchungskollektives von Straßenabschnitten nur eine Aussage über die durchschnittlichen Unfallkosten in Bezug auf die Fahrleistung dieses Kollektives treffen, soll die Grundunfallkostenrate die bei richtliniengerechter Anlage einer Straße (Gestaltung und Betrieb) möglichen fahrleistungsabhängigen Unfallkosten widerspiegeln. Bei der Ermittlung der Grundunfallkostenraten dürfen prinzipiell nur richtliniengerecht ausgebildete Straßen Berücksichtigung finden. Aus der zugrunde liegenden Datenbasis war allerdings nicht erkennbar, ob es sich im Einzelfall um richtliniengerechte oder nicht richtliniengerechte Straßen handelt. Es war davon auszugehen, dass das Untersuchungskollektiv auch nicht richtliniengerechte Anlagen umfasst. Dabei ist zusätzlich das Maß der Abweichung von einer richtliniengerechten Straße unbekannt, sodass keine Aussage darüber getroffen werden kann, inwieweit sich der "Grad der Unsicherheit" auch auf das Unfallgeschehen auswirkt. Bislang existiert kein Verfahren, um aus einem inhomogenen Untersuchungskollektiv, das sowohl richtliniengerechte Straßen als auch nicht richtliniengerechte Straßen umfasst, Grundunfallkostenraten abzuleiten. Daher wurde ein Verfahren entwickelt, das durch statistische Analysen eine Abschätzung der Grundunfallkostenraten aus einem inhomogenen Untersuchungskollektiv ermöglicht. Anhand des entwickelten Verfahrens wurden anschließend die Grundunfallkostenraten für alle im Rahmen der vorliegenden Untersuchung betrachteten Straßen (differenziert nach Querschnittstypen und Knotenpunktarten) abgeleitet.
The overall purpose of the ASSESS project is to develop a relevant and standardised set of test and assessment methods and associated tools for integrated vehicle safety systems, primarily focussing on currently available pre-crash sensing systems. The first stage of the project was to define casualty relevant accident scenarios so that the test scenarios will be developed based on accident scenarios which currently result in the greatest injury outcome, measured by a combination of casualty severity and casualty frequency. The first analysis stage was completed using data from a range of accident databases, including those which were nationally representative (STATS19, UK and STRADA, SE) and in-depth sources which provided more detailed parameters to characterise the accident scenarios (GIDAS, DE and OTS, UK). A common analysis method was developed in order to compare the data from these different sources, and while the data sets were not completely compatible, the majority of the data was aligned in such a way that allowed a useful comparison to be made. As the ASSESS project focuses on pre-crash sensing systems fitted to passenger cars, the data selected for the analysis was "injury accidents which involved at least one passenger car". The accident data analysis yielded the following ranked list of most relevant accident scenarios: Rank Accident scenario 1 Driving accident - single vehicle loss of control 2 Accidents in longitudinal traffic (same and opposite directions) 3 Accidents with turning vehicle(s) or crossing paths in junctions 4 Accidents involving pedestrians The ranked list highlights the relatively large role played by "accidents in longitudinal traffic", and "accidents with turning vehicle(s) or crossing paths in junctions" (the second and third most prevalent accident scenarios, respectively). The pre-crash systems addressed in ASSESS propose to yield beneficial safety outcomes with specific regard to these accident scenarios. This indicates that the ASSESS project is highly relevant to the current casualty crash problem. In the second stage of the analysis a selection of these accident scenarios were analysed further to define the accident parameters at a more detailed level .This paper describes the analysis approach and results from the first analysis stage.
Die Unfallzahlen für das Jahr 2008 zeigen, dass die intensiven Anstrengungen für die Verkehrssicherheit weiterhin Früchte tragen. Nachdem im Jahr 2007 mit 220 Toten auch in Rheinland-Pfalz der geringste Stand seit Einführung der Unfallstatistik registriert wurde, konnte dieser Trend auch im Jahr 2008 bestätigt werden. Die Verkehrssicherheitsarbeit in Rheinland-Pfalz sieht sich dabei zunächst im Kontext des anspruchsvollen Ziels der EU, die Zahl der Verkehrstoten bis 2010 zu halbieren. Im Mittelpunkt steht dabei die Frage, wie die Risiken im Verkehrsverhalten der Menschen minimiert werden können. Vorhandene Sicherheitspotenziale sollen genutzt werden, Maßnahmen sind gezielt auf die Brennpunkte im Verkehrsgeschehen auszurichten. Neben Sicherheitsaktionen und Trainings für die Verkehrsteilnehmer sowie der Polizeiarbeit ist einer der wichtigsten Ansätze die Verbesserung der Infrastruktur. Zu den Maßnahmen auf diesem Gebiet zählen neue Ansätze beispielsweise bei der Überprüfung sicherheitsrelevanter Aspekte schon in der Planung, beim Bau moderner Verkehrsbeeinflussungsanlagen oder bei der Sicherheit an Bahnübergängen und in Tunnels. Ein Fokus liegt jedoch auf der Unfallkommissionsarbeit. Sie ist ein wesentlicher Bestandteil der Gesamtkonzeption zur Verbesserung der Verkehrssicherheit. Das Land Rheinland-Pfalz verfügt seit nunmehr über 35 Jahren über institutionalisierte Erfahrungen auf diesem Gebiet, die auch als Beispiel für die bundesweite Entwicklung dienten. In einem weiteren Schritt werden seit kurzem in einer landesweiten Unfallkonferenz nunmehr Programmschwerpunkte wie beispielsweise die Bekämpfung von Motorradunfällen oder Baumunfällen definiert. Zudem wurden mit einem aufwändigen Programm allen der etwa 400 Unfallkommissionsmitglieder in Rheinland-Pfalz Schulungen angeboten. Eine permanente Nachschulung garantiert dabei einen gleichbleibend hohen Wissensstand. Beispielgebend ist allerdings auch die zentrale Unfallauswertestelle beim Landesbetrieb Mobilität in Koblenz, die es in dieser Form so nur noch in Bayern gibt. Mit ihr steht seit vielen Jahren ein Instrument zur Verfügung, das nicht nur die Grundlagen für gezielte und effektive Verkehrssicherheitsmaßnahmen schafft, sondern auch landesweite Controllings durchführt. Ohne eine finanzielle Ausstattung ist jedoch eine effektive Unfallkommissionsarbeit nicht möglich. Aus diesem Grund wurde als Novum ein spezieller Haushaltsansatz geschaffen, der gezielt ausschließlich im Sinne der Verkehrssicherheit - derzeit mit dem Schwerpunkt Baumunfälle und Motorradsicherheit - eingesetzt wird. Dabei wurde auch in einem Bewertungsverfahren zum Ausbauplan für Landesstraßen die Verkehrssicherheit so gewichtet, dass speziell Unfallhäufungsstellen in die Prioritätenreihung gelangen. Diese Ansätze mit Strategien aus einer Landesunfallkonferenz, gezielter Schulung, finanzieller Ausstattung sowie Unterstützung und Controlling durch eine zentrale Unfallauswertestelle sind zugleich Chance und Herausforderung für eine künftige Verkehrssicherheitsarbeit.
Event Data Recorder (EDR) is an additional function installed in airbag control module (ACM) to record vehicle and occupant information for a brief period of time before, during, and after a crash event. EDRs are now being installed in ACMs by several automakers in the USA and in Japan. The aim of this study is to understand the performance of EDRs for the improvement of accident reconstruction with more reliable information. In the first report of the study, data obtained from EDRs of seven vehicle types were evaluated using 2006-2007 J-NCAP (Japanese new car assessment program) full-lap frontal barrier crash tests and offset frontal deformable barrier crash tests data. For more practical standpoint, we conducted thirteen crash tests reconstructing typical real-world accidents such as single vehicle accidents with barriers or poles, car to car accidents and multi rear-end collisions focusing on Japanese typical accident types. Data obtained from EDRs are compared with data obtained from optical speed sensor, instrumented accelerometers and high speed video cameras. The velocities determined from pre-crash data of EDRs and the maximum change in velocity, delta-V, and delta-V time history data obtained from post-crash data of EDRs are analyzed. The results are as follows: - Pre-crash velocities of EDRs were very accurate and reliable. An average difference between the EDR recording values and reference speeds was 4.2% and a root mean square of the differences was 9.2%. Only two cases resulted large differences for the pre-crash velocity. Both of them were cases with braking prior to the collision. However, another test with braking resulted less difference. The braking condition may influence accuracy of pre-crash velocities. - Maximum delta-Vs obtained from the EDRs showed uncertainty of measurement in several cases in comparisons with the reliable delta-V data. The differences in maximum delta-V were more than 10% in five of twenty-five events data and more than 20% in two of twenty-five events data. An average of the all differences was about 4% and root mean square of the differences was about 11%. Especially large deformation at narrow area may influence accuracy of post-crash delta-V. - Multiple rear-end crash tests were reconstructed using EDRs data as case studies. Some EDRs recorded two events and a time gap between two events, so that these reconstruction case studies were very accurate and reliable. - If though only one of three vehicles in multiple rear end crash was equipped EDR, overview and velocities of all cars may be reconstructed using these limited EDR data. In this case study, leading car- EDR data and middle car- EDR data were valuable. However if only following car was equipped EDR, the reconstruction was not accurate
An analysis of NASS and FARS was conducted to determine crash conditions that involved injuries that are not currently being directly addressed by vehicle safety standards or by consumer information test protocols. Analysis of both field data and US NCAP tests were conducted to determine the relative safety provided by seating position and by vehicle model year. Opportunities for improvements were determined by crash categories with large populations of injuries that were not addressed by safety tests or smaller numbers that were increasing in frequency. Areas of opportunities include improved occupant restrain in rollovers, improved frontal protection for rear seat occupants and improved fire prevention in frontal and rollover crashes.
This study that was funded by the Research Association for Automotive Technology (FAT) develops a method for the evaluation of the placement of tanks or batteries by using the deformation frequencies in real-world accidents. Therefore, the deformations of more than 20.000 passenger cars in the GIDAS database are analysed. For each vehicle a contour of deformation is calculated and the deformed areas of the vehicles are transferred in a rangy matrix of deformation. Thereby, the vehicle is divided into more than 190.000 cells. Afterwards, all single matrices of deformation are summarized for each cell which allows representative analyses of the deformation frequencies of accidents with passenger cars in Germany. On the basis of these deformation frequencies it is possible to determine least deformed areas of all passenger cars. Furthermore, intended placements of tanks or batteries can be estimated in an early stage of development. Therefore, all vehicles with deformations in the intended tank areas can be analysed individually. Considering numerous parameters out of the GIDAS database (e.g. collision speed, kind of accident, overlap, collision partner etc.) the occurring forces can be calculated or the deformation frequency can be estimated. Furthermore, it is possible to consider the influence of primary and secondary safety systems on the deformation behaviour. The analysis of "worst case accident events" is an additional application of the calculated matrix of deformation frequency.
In der Prozessevaluation wurden 3.780 Modellversuchsteilnehmer während der Phase des begleiteten Fahrens bis zu viermal und 1.735 Begleitpersonen einmalig zu unterschiedlichen Aspekten der Maßnahmenumsetzung befragt. Die Teilnahmegründe der Jugendlichen und ihrer Begleiter ließen erkennen, dass das Begleitete Fahren als Bestandteil der Fahranfängervorbereitung gut in den altersspezifischen Lebensabschnitt der jungen Fahrer integriert werden konnte. Insgesamt belegen die Befunde eine große Zugangsfreundlichkeit des Modells und eine hohe Praktikabilität. Im Durchschnitt erbrachten Jugendliche an Tagen mit Begleitfahrt eine Fahrleistung von 32,4 km (Median: 24,0 km). Monatlich wurde eine mittlere Fahrleistung von 318,5 km erbracht. In durchschnittlich acht Monaten Begleitdauer erwarben die Jugendlichen etwa 2.400 km Fahrpraxis. Bei voller Ausschöpfung der Begleitdauer von zwölf Monaten ergab sich eine durchschnittliche Fahrleistung von 3.800 km. Hauptfahrtzwecke waren private Fahrten (Familie, Besuche), Haushaltserledigungen, Freizeitfahrten und Fahrten zur Schule / Ausbildung. Hinsichtlich der Interaktion zwischen Fahranfänger und Begleiter ergibt sich auf der Grundlage zahlreicher Einzelbefunde das Bild einer angemessenen Rolleninterpretation und -ausübung im Sinne eines konstruktiven Zusammenwirkens von Fahranfänger und Begleiter beim fahrpraktischen Kompetenzerwerb. Im Verlauf der Begleitphase war eine deutliche Abnahme unsicherer Fahranfänger zu beobachten. Dies ist Ausdruck des subjektiv wahrgenommenen Zuwachses von Fahrerfahrung während der Begleitphase. Unfälle, Verkehrsverstöße und Verwarnungen in der Begleitphase wurden behördlicherseits nur in geringem Umfang berichtet. Dies lässt erkennen, dass die Maßnahmenpraxis den gebotenen Verkehrssicherheitserfordernissen in hohem Maße gerecht wird. Die erhebliche Ausweitung der fahrpraktischen Vorbereitung durch das Modell "Begleitetes Fahren ab 17 Jahre" hat zu einer strukturellen Veränderung der Fahranfängervorbereitung in Deutschland geführt. Die gegebenen Möglichkeiten hinsichtlich der Nutzungsdauer der Begleitphase und des Umfangs der erbrachten Fahrleistung erscheinen gleichwohl noch nicht ausgeschöpft und empfehlen sich daher als Gegenstand künftiger Optimierungsanstrengungen. Neben der vertieften Ausschöpfung des originären Maßnahmenpotenzials eines längerfristigen fahrpraktischen Erfahrungsaufbaus empfiehlt sich zudem eine sinnvolle Verbindung dieses Maßnahmenansatzes mit weiteren zielführenden Maßnahmen im Rahmen eines integrierten Systems der Fahranfängervorbereitung in Deutschland.
The share of high-tensile steel in car bodies has increased over the last years. While occupant safety has generally benefited from this measure, there is a potential risk that, as a result, rescue time may increase considerably. In more than 60% of all car occupant fatalities a technical rescue has been necessary. These are in particular those cases where occupants die immediately at the accident scene. Therefore, in these cases "rescue time" is a very sensitive parameter. In addition to the general analysis of the need of technical rescue and the actual rescue time depending on model years, the injury pattern of occupants requiring technical rescue will be analysed to provide advice for rescue teams. Furthermore, a detailed analysis of rescue measures for the most popular car models depending on the safety cell design is given.
Das 4-jährige Forschungsprojekt verfolgte das Ziel, den möglichen Einfluss der Laufsohlenbeschaffenheit und des Mikroklimas vor und in Durchlässen von Amphibienschutzanlagen auf die erfolgreiche Durchquerung zu ergründen. Es sollte geklärt werden, welche Verhaltensweisen Amphibien und und andere Kleintiere bei der Tunneldurchquerung zeigen, welche physikalischen und mikroklimatischen Eigenschaften verschiedene Durchlasstypen und Laufsohlen haben und wie diese Einflüsse das Verhalten der Tiere beeinflussen. Das Ziel lag schließlich in einer konzeptionellen Betrachtung zum optimalen Einsatz sowie zur Gestaltung und Unterhaltung derartiger Straßenbauwerke. Untersucht wurden Hygroskopizität und Alkalität, Magnetfeldmuster, Vibrationen und verkehrsbedingte Lärmentwicklungen sowie die Lichtverteilung am Durchlasseingang. Gemessen wurden außerdem Lufttemperatur, Luftfeuchtigkeit, Windgeschwindigkeit und deren Austrocknungswirkung. In abgezäunten Versuchsarenen wurden eingesetzte Amphibien verschiedenen Wahlexperimenten ausgesetzt sowie die Auswirkungen auf das Verhalten anwandernder Tiere an Durchlässen mit vorgenommenen Veränderungen analysiert. Getestet wurden folgende Parameter: Ferromagnetismus, Lichtblitze vorbeifahrender Autos, Beleuchtung des Durchlasses, Luftzug und Lärm im Durchlass, Bodenfeuchtigkeit vor und im Durchlass, Versteckplatzangebote im Durchlass und Zuleitung der Durchlassöffnung. Außerdem wurde die Effizienz eines nachträglich eingebauten Einfallrohrs überprüft. Gut gewässerte Betonbauteile erwiesen sich als unwesentlich hygroskopisch. Viele Betonbauteile waren nur im oberen Tunnelbereich deutlich alkalisch, die Laufbereiche aber immer pH-neutral. Das Erdmagnetfeld wurde an Metallzäunen und metallarmierten Betonteilen aller Anlagen stark verändert und fiel dadurch als Orientierungsmöglichkeit für anwandernde und querende Tiere völlig aus. Tunnel mit schallhartem Betonboden waren lauter als Stelztunnel über einem Naturboden. Verkehrsbedingte Bodenvibrationen und Schallpegel konnten innerhalb der Durchlässe in ihrer Wirksamkeit aber eher vernachlässigt werden. Durchlässe waren hinsichtlich ihrer Lichtverhältnisse natürlichen Tiergängen vergleichbar und wurden bei grabfähigem Untergrund auch als Tagesversteck genutzt. Mikroklimatisch führten die Durchlässe von Amphibienschutzanlagen zu einer deutlichen Dämpfung von Tagesschwankungen der bodennahen Lufttemperatur, Luftfeuchte und von böigen Luftverwirbelungen, wie sie vor Leitanlagen und Durchlasseingängen herrschen. Trotzdem erhöhten Luftbewegungen in den Tunneln die Wasserverdunstung bis zum Doppelten, aber ohne erkennbare negative Auswirkungen auf das Wanderverhalten der Amphibien. Die Tiere liefen vor den Durchlassgängen häufig hin und her. Etwa 13% der beobachteten Tiere versuchte (erfolglos) durch Hochstellen und Klettern an Leit- und Sperreinrichtungen das Schutzanlagensystem zu umgehen. Die meisten Tiere hielten sich dicht an der Sperrwand, bzw. unmittelbar vor den Durchlasseingängen auf, während nur ein geringer Anteil auch tatsächlich hineinwanderte. An Durchlässen mit einem Fallrohr und auch beim Versuchsaufbau mit einen Kombinationssystem aus 1- und 2-Wegedurchlass waren die Eintrittsquoten dagegen nahezu vollständig. Neben Amphibien wurden auch Tiere zahlreicher anderer Tiergattungen bei der Durchquerung der Kleintierdurchlässe beobachtet. Anhand der Ergebnisse erscheint eine Überarbeitung des Merkblatts für Amphibien an Straßen (MAmS) sinnvoll.
Accidents with vulnerable road users require special attention within the road safety work because these accidents are often accompanied with severe injuries. Thus In 2006 at least 6200 Powered Two Wheeler (PTW) riders were killed in road crashes in the EU 25 representing 16% of the total number of road deaths while accounting for only 2% of the total kilometers driven. For the prevention of accidents with VRU above all the knowledge of the causes of the accidents is of special importance. This study is based on the methodology of the German In-Depth Accident Study GIDAS. Within GIDAS extensive data on various fields of accidentology are collected on-scene from road traffic accidents with injuries in the Hannover and Dresden area. Using a well defined sample plan the collected data is highly representative to the whole German situation (Brühning et al, Otte et al). The need of in-depth accident causation data in accident research led to the development of a special tool for the collection of such data called ACASS (Accident Causation Analysis with Seven Steps), which was implemented in the GIDAS methodology in 2008 and described by Otte in 2009.
Looking at the total of sum of fatal car accidents the number of single-vehicle accidents and particularly run-offroad (ROR) accidents are most frequent. In Austria on the Autobahn ROR accidents amounts to almost 45% of all fatal accidents, i.e. nearly every second fatal accident is caused by ROR accidents and interaction with infrastructure. Approximately 43 people were killed on Autobahns in ROR accidents with passenger cars. One possibility of protection against impacts with infrastructure is the use of guardrails. However, the initial element identified as a turned down terminal could become a dangerous impact object. These turned down terminals may lead a vehicle to roll over or the car "takes-off" when impacting the turned down guardrail. In many cases it is reported that the vehicle is jumping into road side objects such as traffic sign poles or overpasses. On average, nine people are killed in such accidents every year in Austria.
Since 2005, the motorcycle crash fatalities in the US exceeded 10% of the overall annual traffic fatalities. Consequently, it has become critical to gain in-depth understanding of the factors and characteristics contributing to motorcycle crashes. Unfortunately, there currently exists no database gathering the necessary information for an in-depth analysis of the US motorcycle crashes. So this study utilizes the NASS/CDS database (National Automotive Sampling System, Crashworthiness Data System) in order to gain insights into the patterns and factors leading to a NASS/CDS motorcycle crash, from 1997 to 2007. NASS/CDS samples about 5,000 passenger car tow-away crashes per year. Each case includes photographs and detailed data on crash and pre-crash characteristics, vehicle types, trajectories, types of impact, and other pertinent roadway and crash scene information, allowing an in-depth investigation of the crash mechanisms. However, the NASS/CDS sampling process specifically focuses on passenger car crashes, so the cases extracted only correspond to crashes in which a passenger vehicle was towed, and a motorcycle was somehow involved. Thus, a by-hand in-depth review of about 200 cases allowed retrieving 106 relevant crashes for this study, tending to represent the severe passenger vehicle(s) versus motorcycle(s) crashes on US roads. The findings lead to the conclusion that these crashes mostly result from the low conspicuity of the motorcycle, and from the inability of the car drivers to fully appreciate and anticipate the behavior of a motorcycle. Indeed, it has been shown that, first, the car drivers involved in these cases did not attempt any avoidance maneuver, second, they were largely of ages under 25, and finally, the majority of the crashes were in an intersection scenario. In addition, the two major scenarios unveiled were the car attempting a left turn from the opposite direction and the car attempting a left turn from the right. The paper mentions several solutions to enhance the motorcycle- conspicuity and to allow the car drivers to better anticipate its behavior, which seem to be key factors in the intersection-related crashes (and more generally in the passenger vehicle(s) versus motorcycle(s) crashes).
Small overlap frontal crashes are defined by a damage pattern with most of the vehicle deformation concentrated outboard of the main longitudinal structures. These crashes are prominent among frontal crashes resulting in serious and fatal injuries, even among vehicles that perform well in regulatory and consumer information crash tests. One of the critical aspects of understanding these crashes is knowing the crash speeds that cause the types of damage associated with serious injuries. Laboratory crash tests were conducted using 12 vehicles in three small overlap test conditions: pole, vehicle-to-vehicle collinear, and vehicle-to-vehicle oblique (15-degree striking angle). Field reconstruction techniques were used to estimate the delta V for each vehicle, and these results were compared with actual delta V values based on vehicle accelerometer data. Estimated delta Vs were 50% lower than actual values. Velocity change estimates for small overlap frontal crashes in databases such as NASS-CDS significantly underestimate actual values.
In order to enable foreseeing or comparing the benefit of safety systems or driver assistance systems in Germany, in the United States and in Japan, the traffic accident databases in those three countries are examined. The variables used are culpable party, collision partner, accident type, and injury level and the method to re-classify the databases for comparison are proposed. The result indicates that single passenger car fatality is the most frequent in Germany and in the United States, while passenger car vs. pedestrian is the most frequent fatality scenario in Japan. When the casualty by fatality ratio is focused, the greatest difference is observed in rear-end collisions. The ratio of slight injuries in Japan yields about eighteen times as many as those in Germany, and about eight times as many as those in the United States.
Causation patterns and data collection blind spots for fatal intersection accidents in Norway
(2010)
Norwegian fatal intersection accidents from the years 2005-2007 were analysed to identify any causation patterns among their underlying contributing factors, and also to evaluate whether the data collection and documentation procedures used by the Norwegian in-depth investigation teams produces the information necessary to perform causation pattern analysis. A total of 28 fatal accidents were analysed. Details on crash contributing factors for each driver in each crash were first coded using the Driving Reliability and Error Analysis Method (DREAM), and then aggregated based on whether the driver was going straight or turning. Analysis results indicate that turning drivers to a large extent are faced with perception difficulties and unexpected behaviour from the primary conflict vehicle, while at the same time trying to negotiate a demanding traffic situation. Drivers going straight on the other hand have less perception difficulties. Instead, their main problem is that they largely expect turning drivers to yield. When this assumption is violated, they are either slow to react or do not react at all. Contributing factors often pointed to in literature, e.g. high speed, drugs and/or alcohol and inadequate driver training, played a role in 12 of 28 accidents. While this confirms their prevalence, it also indicates that most drivers end up in these situations due to combinations of less auspicious contributing factors. In terms of data collection and documentation, information on blunt end factors (those more distant in time/space, yet important for the development of events) was more limited than information on sharp end factors (those close in time/space to the crash). A possible explanation is that analysts may view some blunt end factors as event circumstances rather than contributing factors in themselves, and therefore do not report them. There was also an asymmetry in terms of reported obstructions to view due to signposts and vegetation. While frequently reported as contributing for turning drivers, they were rarely reported as contributing for their counterparts in the same accidents. This probably reflects an involuntary focus of the analyst on identifying contributing factors for the driver legally held liable, while less attention is paid to the driver judged not at fault. Since who to blame often is irrelevant from a countermeasure development point of view, this underlying investigator mindset needs addressing to avoid future bias in crash investigation reports.
Providing effective occupant protection in rollover crashes requires supplying the occupant with a restraint system proven effective in the dynamic rollover accident mode. Preventing ejection and providing restraint sufficient to prevent potentially injurious contacts with both interior and exterior vehicle components is paramount for effective rollover occupant protection. Research has shown that the injury potential can be decreased by closely coupling the occupant to the seat. This paper focuses on the effect of restraint system slack and its relationship to occupant excursion and ejection potential during rollover. Various restraint system configurations are evaluated in rollover-type test environments. A review of prior research is presented prior to presenting new quasi-static vehicle inversion studies conducted with live surrogate occupants. Additionally, dynamic rollover testing utilizing anthropometric test devices (ATDs) is presented. The influence of belt looseness and effects of various restraint designs on the belted occupants' injury potential are discussed.
In road traffic accidents, a car-seat and its occupant can be subjected to various crash pulses in the case of a rear impact. This study investigates the influence of crash pulse shape on seat-occupant response and evaluates the corresponding risk of whiplash injury. For this purpose, a rigorously validated seat-occupant system model is used to study different carseat designs and crash pulses. Two different car-seat concepts are also presented which can effectively mitigate whiplash injury for a wide range of crash severity. It is shown that for crash pulses of similar severity, the level of whiplash-risk depends strongly on the combined effects of seat design and crash pulse shape.
Although the statistics show a decreasing rate of child injuries and fatalities in German road accidents more efforts can be made to protect children in cars e.g. by developing appropriate child restraint systems. An important part in of this work can be achieved with the help of crash tests using child dummies. However these crash tests cannot completely reflect the situation of real world crashes as factors like children moving out of the optimal position or children incorrectly fastened by their parents are difficult to predict. Therefore this study gives an overview over the current accident and injury situation of child occupants in cars in German road accidents.
Neben der zunehmenden Bedeutung der aktiven Sicherheit bleiben Maßnahmen der passiven Sicherheit bei der Entwicklung moderner Kraftfahrzeuge unabdingbar. Die Weiterentwicklung von Maßnahmen zum passiven Fußgängerschutz war zunächst größtenteils durch Verbraucherschutztests wie zum Beispiel Euro NCAP oder JNCAP getrieben und ist nun auch durch gesetzliche Regelungen verpflichtend geworden. Im vorangegangenen Forschungsprojekt der BASt FE 82.229/2002 Schutz von Fußgängern beim Scheibenaufprall ist die Grundlage eines modularen Prüfverfahrens für den Kopfaufprall im Bereich der Windschutzscheibe, bestehend aus einem Versuchs- und einem Simulationsteil, erarbeitet worden. Im Rahmen dieses Projektes wurde ein hybrides Testverfahren bestehend aus Versuch und Simulation ausgearbeitet, das den Bereich der Windschutzscheibe und dabei auch crashaktive Systeme wie Airbags berücksichtigt. Das Testverfahren kombiniert Komponentenversuche mit einem Simulationsteil, in dem Fahrzeug-Fußgänger-Simulationen und lmpaktorsimulationen durchgeführt werden. Zusätzliche Dummyversuche dienten zur Bewertung des Testverfahrens. Alle erarbeiteten virtuellen und realen Testmethoden wurden an einem Referenzfahrzeug (Opel Signum), welches repräsentativ für eine durchschnittliche Mittelklasselimousine steht, durchgeführt. Das Fahrzeug wurde mit einem Airbagsystem ausgerüstet und der Testprozedur mit und ohne diesem System vergleichend unterzogen. Innerhalb dieser Untersuchungen konnte gezeigt werden, dass neue Testmethoden unter Ausnutzung von Simulationen und Komponententests es erlauben, realistischere Versuchsbedingungen unter Berücksichtigung von potenziellen Kopfaufprallpositionen und -zeiten zu definieren. Dabei können sehr gute Übereinstimmungen zwischen Fußgängersimulation und Dummyversuch erreicht werden. Die Randbedingungen für den Kopfaufprall und die Aufprallzeit wurden durch den Einsatz von Fußgängermodellen ermittelt. Weiterhin ermöglichen die Simulationen, zusätzliche Einflussdaten wie Vektoren mit den Kopfaufprallgeschwindigkeiten und -winkeln zu bestimmen.
Recent findings from real-world accident data have shown that fatality risks for pedestrians are substantially lower than generally reported in the traffic safety literature. One of the keys to this insight has been the large and random sample of car-to-pedestrian crashes available in the German In-Depth Accident Study (GIDAS). Another key factor has been the proper use of weight factors in order to adjust for outcome-based sampling bias in the accident data. However, a third factor, a priori of unknown importance, has not yet been properly analysed. This is the influence of errors in impact speed estimation. In this study, we derived a statistical model of the impact speed errors for pedestrian accidents present in the GIDAS database. The error model was then applied to investigate the effect of the estimation error on the pedestrian fatality risk as a function of car impact speed. To this end, we applied a method known as the SIMulation-EXtrapolation (SIMEX) method. It was found that the risk curve is fairly tolerant to some amount of random measurement error, but that it does become flattened. It is therefore important that the accident investigations and reconstructions are of high quality to assure that systematic errors are minimised and that the random errors are under control.
The NHTSA-sponsored Crash Injury Research and Engineering Network (CIREN) has collected and analyzed crash, vehicle damage, and detailed injury data from over 4000 case occupants who were patients admitted to Level-I trauma centers following involvement in motor vehicle crashes. Since 2005, CIREN has used a methodology known as "BioTab" to analyze and document the causes of injuries resulting from passenger vehicle crashes. BioTab was developed to provide a complete evidenced-based method to describe and document injury causation from in-depth crash investigations with confidence levels assigned to the causes of injury based on the available evidence. This paper describes how the BioTab method is being used in CIREN to leverage the data collected from in-depth crash investigations, and particularly the detailed injury data available in CIREN, to develop evidence-based assessments of injury causation. CIREN case examples are provided to demonstrate the ability of the BioTab method to improve real-world crash/injury data assessment.
Bone fracture patterns could be crucial in reconstructing the nature of loading, especially in the lower limb and upper limb kinematics in vehicle-pedestrian crashes. In addition, use of FE bone models can be a handy tool to predict vehicle impact velocity and the impact direction. The point of fracture initiation in bone loading has been predicted quite accurately earlier. A methodology that predicts bone crack initiation and its propagation pattern for the six known loading directions using a single material and failure model is presented.