Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
- Buch (Monographie) (427)
- Konferenzveröffentlichung (336)
- Bericht (23)
- Arbeitspapier (13)
Volltext vorhanden
- ja (799) (entfernen)
Schlagworte
- Germany (536)
- Deutschland (534)
- Forschungsbericht (387)
- Research report (387)
- Conference (306)
- Konferenz (302)
- Unfall (180)
- Accident (179)
- Safety (148)
- Sicherheit (145)
Institut
- Sonstige (799) (entfernen)
It is very important for Automotive OEMs to get feedback on their product performance on real roads for continuous improvement. Every OEM has a way of collecting this feedback for various performance parameters. Systematic accident research is a way to generate the information related to safety performance of the vehicle. In India, while there is a large amount of data related to the accidents, it is found this data is aimed at understanding the gross statistics and not directly useful for technology development. This paper explains learnings from a pilot study carried out in collaboration with an Emergency Medical Services provider on one of the expressways (motorways). This pilot study has resulted in development of working model that could now be scaled up at for wider application. The paper also presents some of the important observations based on the data collected.
The number of injured car occupants decreases constantly. Nevertheless, they account for nearly 50% of all fatalities and about 44% of all seriously injured persons in German traffic accidents. Further reductions of casualties require multiple efforts in all parts of traffic safety. In this paper a detailed analysis of the important pre-hospital rescue phase was done. The basis for future improvements is the knowledge about injury causation of car occupants in combination with other corresponding influence factors. For that reason more than 1.200 severe (AIS3+) injuries of frontal car occupants were analyzed. For the most relevant injuries of car occupants multivariate analysis models were created to predict the probability of these injuries in a real crash scenario. In addition to the collision severity different influence factors like impact direction, seat belt usage, age of the occupant, and gender were analyzed. Furthermore, the models were checked regarding the goodness of fit and all results all results were checked concerning their robustness. The prediction models were created on the basis of 5.000 car accidents. Afterwards, the models were validated using 4.000 different car accidents. The prediction of the probability of severe injuries could be used for different applications in the field of traffic safety. One possibility is the implementation of the models in a tool for the on-the-spot diagnosis. The background for the development of such applications is the fact, that there are only limited diagnostic possibilities available at the accident scene. Nevertheless, the rescue forces have to make essential decisions like the alerting of the necessary medical experts, appropriate treatment, the type of transportation and the choice of an adequate hospital. These decisions quite often decide between life and death or influence the long-term effects of injured persons. At this point, indications of expectable injuries could help enormously. To enable even persons with limited technical knowledge to use the tool, a procedure was developed that facilitates the assumption of the given crash severity. Another important possibility for the application of the prediction models is the use for the qualification of information sent by e-call systems.
Introduction: Spine injuries pose a considerable risk to life and quality of life. The total number of road deaths in developed countries has markedly decreased, e.g. in Germany from over 20000 in 1970 to less than 4000 in 2010, but little is known how this is reflected in the burden of spine fractures of motor vehicle users. In this study, we aimed to show the actual incidence of spine injuries among drivers and front passengers and elucidate possible dependencies between crash mechanisms and types of injuries.
Beside numerous information about vehicles injuries and environmental data the GIDAS database contains detailed reconstruction data. This data is calculated by a reconstruction engineer who handles about 1000 accidents per year. The spectrum of one reconstruction ranges from simple crossing accidents to complex run-off accidents with rollover events. Especially for complex accident scenarios there is a large effort to design the environment of the accident scene within PC-Crash ®. To reduce the reconstruction time by maintaining the high quality of reconstruction 3D-geodata can be useful. Geodata is available for nearly every area in Germany and can be used for a fast and detailed creation of complex accident environments. In combination with the accident sketch areal images of the accident scene can be created and the participants are implemented in the new-built 3D-reconstruction environment. As a consequence, the characteristics of the terrain can be considered within the reconstruction which is especially important for run-off accidents.
MANSSEN diskutiert das Generalthema des Forschungsseminars, ob sich "das straßenrechtliche Nutzungsregime" tatsächlich im Umbruch befindet und diagnostiziert eine Gewichtsverschiebung vom Straßenrecht hin zum Straßenverkehrsrecht. Das klassische Straßenrecht habe immer weniger zur Weiterentwicklung des Straßenwesens beizutragen. In diesem Zusammenhang behandelt er auch neue Verkehrskonzepte wie "Simply City" und "Shared Space". SIEGELs Beitrag über Grundrechtsgebrauch auf öffentlichen Straßen verdeutlicht anhand aktueller Beispiele die praktische Bedeutung des Straßenrechts bei der Verwirklichung von Grundrechten. Nach seiner Einschätzung verfügt das Straßenrecht insoweit nach wie vor ein adäquates Steuerungspotenzial. Etwaige Lücken könnten durch das Straßenverkehrsrecht, vor allem aber durch eine ergänzende Heranziehung des Polizeirechts geschlossen werden. Der Beitrag von ENDERLE über "Grenzüberschreitende Infrastrukturen " Planungs- und naturschutzrechtliche Besonderheiten" bezieht sein Anschauungsmaterial von dem Projekt der Fehmarnbelt-Querung. Als typische Abstimmungsprobleme bei der Planung und Genehmigung grenzüberschreitender Projekte behandelt sie namentlich die Frage der Linienbestimmung sowie grenzüberschreitende Verträglichkeitsprüfungen für FFH- und Vogelschutzgebiete. Der abschließende Beitrag von DURNER "Das Netzausbaubeschleunigungsgesetz 2011" stellt dar, dass die in diesem Gesetz geschaffene neue "Fachplanung" des Bundes teils Elemente des Raumordnungsverfahrens, teilweise jedoch auch solche der straßenrechtlichen Linienbestimmung und der standortbezogenen Raumordnungsziele aufweist. Letztlich folgt die Bundesfachplanung im Hinblick auf die Bindungswirkung im Wesentlichen dem Modell des -§ 4 ROG. Das Modell des NABEG mag für den Netzausbau sachgerecht sein, erscheint jedoch im sonstigen Infrastrukturbereich unrealistisch.
Rollovers continue to be a major source of heavy truck fatalities when compared to other accident modes. Real world rollover accidents are analyzed and two distinct damage patterns are identified. Damage to heavy truck roofs can occur from lateral loading that transitions to vertical roof loading as the vehicle rolls onto its side and then over onto its roof. A second load path can occur when the vehicle has rolled onto its side and furrows into the ground generating large longitudinal friction forces between the roof and ground. A review of the previous literature and various test methodologies are presented. A sled impact test methodology is presented which allows for structural assessment of a heavy truck cab's crashworthiness in both of these loading environments. Two test series are presented using the sled impact test methodology in order to analyze real world truck rollovers using varying impact platen and contact angles. The structural deformation and failure patterns were found to be consistent with damage seen in real world accident vehicles. In each case, a second equivalent truck cab was then reinforced and tested under similar conditions to evaluate the energy management and crush resistance of a stronger cab structure. These structural reinforcements demonstrated a substantial reduction in roof crush and protected the survival space of the occupant compartment. The sled impact test procedure is an effective method for testing the structural performance of a heavy truck cab in a variety of loading scenarios comparable to real world accidents and ascertaining the load and energy load levels in these accident modes.
Supervision of the safety performance in public transport is one of the main tasks of the Federal Office of Transport (FOT) in Switzerland. Recently a three level system of safety indicators has been defined to cover all means of Swiss public transport. The safety indicators are fed by the FOT incident database since the year 2000. In cooperation with the Institute for Traffic Safety and Automation Engineering (iVA) at TU Braunschweig, Germany, FOT is developing a suitable methodology for the definition and evaluation of the safety targets in Swiss public transport. The methodology is applied for evaluation of safety indicators on a country level and for single transport companies. In a new approach the abovementioned methodology is applied to car incident data to develop an indicator based cross-modal safety measure.
A concept for Safe-Driving-Trainings with a focus on risky behavior and safety related attitudes has been evaluated. 519 participants have been tested before and after the training by means of a questionnaire with the topics: technical driving competence, awareness of risks, and propensity for anticipation. A control group (131 subjects) was used to check for the possibility of response artifacts. Three months later, 92 members of the treatment group and 25 members of the control group have been tested again. The results show significant positive changes in driving competence, risk awareness, and safety related attitudes, especially anticipation, due to the training. Compared to the control group the participants have become more risk aware and they regard of risk avoiding behavior as more important. The results show that this concept for Safe-Driving-Trainings has not only short-term but, more importantly, long-term positive effects on the safety-relevant attitudes and cognitions of young drivers.
To date, the Trauma Registry (TraumaRegister DGU-® contains data of approximately 100.000 severely injured patients, 65% of which suffered from a road traffic crash. Thus, it is the world's largest data base for severely injured patients. The article describes the development of the registry and explains how it was rolled out over Germany using the established structure of the German Trauma Network (TraumaNetzwerk DGU-®). In addition, this article presents three typical use cases from the fields of quality management, policy making and system-wide interventions, clinical research and injury prevention. In conclusion, the TraumaRegister DGU-® is a well-established tool for various purposes related to the control and reduction of the burden of road injury. Its ongoing expansion to other countries will support the goal of international benchmarking of hospitals and trauma systems.
Police records about traffic accidents like used by IRTAD (International Road Traffic and Accident Database) and CARE (Community Road Accident Database) do not represent all road injuries. For instance, road accidents of bicyclists without a counterpart are usually not reported. Furthermore, IRTAD-like data contains hardly any information on injury outcome and accident circumstances. This information gap leads to an under-representation of the safety concerns of the most vulnerable road users like children and the elderly both in accident research and safety promotion. Injury registration for the European Injury Database (IDB), in turn, combines details of accident causation with diagnostic information that can be used to assess injury severity and long term consequences. The IDB is collecting data from hospital emergency department patients and is being implemented in a growing number of countries. In this article IDB results on mode of transport and injury outcome are presented from a sample of nine EU member states.
Automotive interiors have long been a potentially injurious impact area to occupants during accidents, especially in the absence of adequate padding. The U.S. Federal Motor Vehicle Safety Standard (FMVSS) 201, Occupant Protection in Interior Impact, outlines test procedures and performance criteria in order to mitigate potentially injurious head impacts to interior surfaces. FMVSS 201 specifies a finite set of impact locations and applies to passenger vehicles of a specified year range and with a gross vehicle weight rating less than 10,000 lb. In this paper, two head impact test methodologies are presented, a pendulum-test device and a Free Motion Headform (FMH) launching device, which allows for dynamic, repeatable impact evaluation of various vehicle interior surfaces and their impact attenuation abilities. The presented testing includes multiple series that evaluate the effect of differing vehicle upper interior padding on occupant head injury. One study in particular, analyzes a head impact to the side header of a heavy truck (not included in FMVSS 201) during a 90 degree rollover. Additionally, two other series of tests are presented which assess the injury reduction effect of side airbags to near side as well as far side occupants in a side impact scenario. Lastly, a forensic analysis is presented which evaluates two possible head impact locations experienced in a real world accident by analysis of the resulting interior compartment damage utilizing the FMH launching device test method. The data collected and presented includes accelerometer instrumentation and high speed video analysis. These studies demonstrate that adequate padding and airbags are very effective at mitigating head injury potential at impact speeds of 12-25 mph (19-40 kph).
The paper aims to study the injury risk and kinematics of pedestrians involved in different passenger vehicle collisions. Furthermore, the difference of pedestrian kinematics in the accidents involved minivan and sedan was analyzed. The 18 sample cases of passenger car to pedestrian collisions were selected from the database of In-depth Investigation of Vehicle Accident in Changsha of China (IVAC),of which the 12 pedestrian accidents involved in a minivan impact for each case, and the 6 accidents in a sedan impact for each. The selected cases were reconstructed by using mathematical models of pedestrians and accident vehicles in a multi-body dynamic code MADYMO environment. The logistic regression models of the risks for pedestrian AIS 3+ injuries and fatalities were developed in terms of vehicle impact speed by analyzing the minivan-pedestrian and sedan-pedestrian accidents. The difference of pedestrian kinematics was identified by comparing the results from reconstructed pedestrian accidents between the minivans and sedans collisions. The result shows that there is a significant correlation among the impact speed and the severity of pedestrian injuries. The minivan poses greater risk to pedestrian than sedan at the same impact speed. The kinematics of pedestrian was greatly influenced by vehicle front shape.
Im Rahmen dieses Projektes wurden vor dem Hintergrund der nationalen und europäischen Entwicklungen (z.B. Europäische Normung etc.) neben den Randbedingungen für die Kraftduktilitätsprüfung auch die Auswertung der dabei erfassten Daten genauer betrachtet sowie praxisrelevante Parameter bzgl. der Versuchsdurchführung und -auswertung ermittelt. Ebenso wurde auch versucht den gesamten Verlauf der Kraftduktilitätskurve sowie ggf. auch die Gestalt der Kurve in die Auswertung mit einzubeziehen und nicht nur, wie bisher, punktuelle Werte bzw. einzelne feste Bereiche. Anhand der in diesem Projekt ermittelten Ergebnisse kann festgehalten werden, dass die Probekörperform mit geradem Steg (Form II) gemäß DIN EN 13589 der Probekörperform mit verjüngtem Steg (Form I) gemäß DIN EN 13398 vorzuziehen ist, da es trotz der höchsten Maximalkräfte bei der Form I bei niedrigen Temperaturen häufig zu einem vorzeitigen Probenriss kam und die die Ausziehlänge wesentlich geringer als bei der Form II (Form mit geradem Steg) war. So das in vielen Fällen eine Ermittlung der Formänderungsarbeit zwischen 200 mm und 400 mm Dehnungsweg gemäß der DIN EN 13703 bei Prüfung mit der Form I nicht möglich war, da die Proben die Ausziehlänge von 400 mm nicht erreichten. Dadurch kann die Form mit verjüngtem Steg (Form I), trotz der Verwendung für die elastische Rückstellung nach DIN EN 13398, nicht für den Einsatz bei der Kraftduktilitätsprüfung empfohlen werden. Hinsichtlich der Ziehgeschwindigkeit sollte die bis-her in der Norm verankerte Ziehgeschwindigkeit von 50 mm/min beibehalten werden, da eine Reduzierung der Geschwindigkeit keine Vorteile, z.B. hinsichtlich der Vermeidung eines vorzeitigen Proberisses bei niedrigen Temperaturen, bringt und die Prüfung mit der reduzierten Ziehgeschwindigkeit von 25 mm/min somit doppelt so lange dauern würde. Bezüglich der Prüftemperatur sollte ein Vorgehen gewählt werden, dass es erlaubt, die Ergebnisse, die bei den verschiedenen Bitumensorten gewonnen werden, zu vergleichen. Dies könnte beispielsweise 10-°C als Prüftemperatur sein. Die Festlegung einer einheitlichen Prüftemperatur und dann entsprechend sortenspezifische Anforderungen an die Formänderungsarbeit würden auch bei unbekannten Bitumen und/oder Kontrollprüfungen die Durchführung der Kraftduktilitätsprüfung sowie die Bestimmung der Bitumensorte erleichtern. Aufgrund der im Rahmen des Projektes ermittelten Ergebnisse sollte für Kraftduktilitätsprüfungen die Probekörperform mit geradem Steg gemäß DIN EN 13589 und eine Ziehgeschwindigkeit von 50 mm/min gewählt werden. Die anderen Randbedingungen (Probekörperform mit verjüngtem Steg und Ziehgeschwindigkeit von 25 mm/min) haben sich hinsichtlich der Durchführbarkeit, Auswertbarkeit und Praktikabilität als nicht geeignet erwiesen. Das Rückgewinnungsverfahren für polymermodifizierte Bitumenemulsionen gemäß dem Entwurf der DIN EN 13074-1 hat sich bei den Untersuchungen im Labor als geeignet hinsichtlich Anwendbarkeit und der Ergebnisse gezeigt. So dass keine Modifikation des Verfahrens notwendig erscheint. Für die genauere Interpretation der Kraftduktilitätskurven sowie ggf. Unterscheidung der einzelnen Sorten ist eine Aufteilung der Kurve in zwei Teilbereiche unumgänglich. Allerdings konnte bisher noch kein Verfahren identifiziert werden, mit dem dies eineindeutig möglich ist. Vor allem weil die in der Praxis auftretende Spannbreite der Ergebnisse bei einer einzelnen Sorte bereits recht groß ist, daher nicht immer auszuschließen ist, dass sich die Randbereiche der einzelnen Sorten nicht überschneiden. Um die einzelnen Sorten anhand der Prüfergebnisse unterscheiden bzw. differenzieren zu können, sind die Prüfungen bei einheitlichen Temperaturen unabhängig von der Bitumensorte notwendig, da sich mit der Änderung der Temperatur auch der Kurvenverlauf und somit die Kennwerte ändern. Das Verfahren zur Aufteilung der Kurven in Teilbereiche sollte frei von subjektiven Einflüssen rein mathematisch erfolgen, nachvollziehbar und einfach im täglichen Laborbetrieb anwendbar sein. Daher wird als relativ einfache Variante die Ermittlung der Steigung des Kurvenverlaufes anhand der 1. Ableitung vorgeschlagen. Unabhängig von der Art des Kurvenverlaufes lässt sich hierbei immer das Maximum der Steigung ermitteln. Anhand dessen kann die Trennung in die beiden Bereiche der Kraftduktilitätskurve einfach und schnell durchgeführt werden. Die weitere Interpretation des Kurvenverlaufes sowie die Zuordnung zu einer Bitumensorte kann anhand des Quotienten der Formänderungsarbeiten der beiden Abschnitte erfolgen.
The misuse of CRS (child restraint system) is one of the most urgent problems in connection of child safety in cars. Numerous field studies show that more than two thirds of all CRS are used in a wrong way. This misuse could lead to serious injuries for the children. Surprisingly the quality of CRS use is coded much better in accident data (e.g. GIDAS) than the results of observatory field studies show. It is expected that misuse of CRS was not detected by the accident teams in a large number of the cases. An essential part in improving child seats and their usability is the knowledge of the relation between misuse and resulting injuries. For that the analysis and experimental reconstruction of accidents is an important part. For allowing an exact experimental accident reconstruction, it is necessary to have detailed information about the securing situation of the child and about the installation of the CRS in the car.
This paper will outline ETSC's contribution to the European Union's road safety policy 2011-2020. It will present some of the main recommendations from ETSC's Blueprint for the 4th Road Safety Action Programme and will introduce the response to the European Commission's Road Safety Policy Orientations 2011-2020 (published July 2010). The second framework document presented is the Transport White Paper (published March 2011). The paper will focus on new targets and the new vision set for Europe's Road Safety policy picking out some issues in particular such as traffic law enforcement and the protection of vulnerable road users. It will argue that by reinforcing the current Road Safety Policy Orientations, the EU will be better placed to reach its new ambitious goal of halving road deaths by 2020 and the longer term zero casualty vision.
A series of drop tests and vehicle tests with the adult head impactor according to Regulation (EC) 631/2009 and drop tests with the phantom head impactor according to UN Regulation No. 43 have been carried out by the German Federal Highway Research Institute (BASt) on behalf of the German Federal Ministry of Transport, Building and Urban Development (BMVBS). Aim of the test series was to study the injury risk for vulnerable road users, especially pedestrians, in case of being impacted by a motor vehicle in a way described within the European Regulations (EC) 78/2009 and (EC) 631/2009. Furthermore, the applicability of the phantom head drop test described in UN Regulation No. 43 for plastic glazing should be investigated. In total, 30 drop tests, thereof 18 with the adult head impactor and 12 with the phantom head impactor, and 49 vehicle tests with the adult head impactor were carried out on panes of laminated safety glass (VSG), polycarbonate (PC) and laminated polycarbonate (L-PC). The influence of parameters such as the particular material properties, test point locations, fixations, ambient conditions (temperature and impact angle) was investigated in detail. In general, higher values of the Head Injury Criterion (HIC) were observed in tests on polycarbonate glazing. As the HIC is the current criterion for the assessment of head injury risk, polycarbonate glazing has to be seen as more injurious in terms of vulnerable road user protection. In addition, the significantly higher rebound of the head observed in tests with polycarbonate glazing is suspected to lead to higher neck loads and may also cause higher injury risks in secondary impacts of vulnerable road users. However, as in all tests with PC glazing no damage of the panes was observed, the risk of skin cut injuries may be expected to be reduced significantly. The performed test series give no indication for the test procedure prescribed in UN Regulation No. 43 as a methodology to approve glass windscreen not being feasible for polycarbonate glazing, as all PC panes tested fulfilled the UN R 43 requirements. The performance of the windscreen area will not be relevant for vehicle type approval according to the upcoming UN Regulation for pedestrian protection. However, it is recommended that pedestrian protection being considered for plastic windscreens to ensure at least the same level of protection as glass windscreens.
Various kinds of demerit point systems have been developed and implemented in European countries, aimed at tackling repeat offences in road transport by acting as a deterrent and providing sanctioning. The impact of a demerit point system on the number of crashes is often reported to be significant, but temporary. The objective of the EU BestPoint project was to establish a set of recommended practices that would result in a more effective and sustainable contribution of demerit point systems to road safety. A high actual chance of losing the licence and a high perceived chance of losing the licence are basic prerequisites for the effective operation of demerit point systems. For measures applied within the context of a demerit point system, a four-step-approach is recommended: warning letter, driver improvement course, licence withdrawal, rehabilitation course. Further recommendations concern issues like points and offences, e.g. which offences should lead to points, target groups, and the administration of demerit point systems. The final result of the EU BestPoint project is a handbook (van Schagen & Machata, 2012) which provides a concise overview of all recommended practices. The presentation/paper outlines how sustainable safety improvements can be achieved if national demerit point systems are implemented and maintained according to the recommended practices. In addition, potential further steps towards an EU-wide demerit point system (cross-border exchange on points and/or offences) are presented.
Der Brückenbau in Deutschland kann auf eine lange Tradition in der Überwachung der Bauwerke verweisen und die Entwicklung der Rechentechnik gestattet in immer komplexeren Strukturen die Verwaltung der Bauwerksdaten in Datenbanken. Verfügbare Programmsysteme wie zum Beispiel das Bauwerks Management System erlauben die Erfassung, Verwaltung und Auswertung der Bauwerksdaten. Die Entwicklung der Rechentechnik wird auch durch die Entwicklung der Messtechnik begleitet, so dass zunehmend intelligente Sensorik den Alltag begleitet. Eine automatisierte Messwerterfassung an Bauwerken und deren Auswertung wird Monitoring genannt. Heute existieren sowohl Monitoringsysteme, die sich durch die technische Ausstattung und entsprechende Auswerteverfahren auszeichnen, als auch jeweils getrennte Komponenten. Da schließt das Projektziel an, welches die Analyse der Möglichkeiten des Einsatzes von Monitoringsystemen zur Bewertung des Schädigungszustandes von Brücken für die Tragfähigkeit und die Restnutzungsdauer beinhaltet. Es wird eine Literaturanalyse hinsichtlich existierender Monitoringsysteme mit genannter Zielstellung angefertigt. Im Ergebnis wird festgestellt, dass es gegenwärtig keine Monitoringsysteme gibt, die explizite Aussagen zur Tragfähigkeit erlauben. Die gegenwärtigen Systeme zeigen globale Schädigungen auf und bewerten dann auf der Basis notenähnlicher Strukturen. Im Rahmen des Projektes wird eine Konzept für ein Monitoringsystem entwickelt, welches für konkrete Versagensszenarien - dem Festigkeitsversagen und der Ermüdung - quantifizierte aber unscharfe Aussagen zur Tragfähigkeit und Restnutzungsdauer für die untersuchte Brücke erlaubt. Der Abstand zum Versagen durch Übergang des Tragwerks in einen Bruchzustand (Tragfähigkeit) wird im konzipierten Monitoringsystem durch den Zuverlässigkeitsindex Beta und die Versagenswahrscheinlichkeit Pf beschrieben. Die Restnutzungsdauer bei Tragfähigkeitsminderungen ist implizit bei den veränderlichen Basisvariablen und den Schädigungsverläufen abgebildet. Als Maß für Aussagen zur expliziten Restnutzungsdauer infolge Materialermüdung dienen die Schädigungssumme D und die zugehörige Nutzungsdauer tzD. Zur Abgrenzung sicherer und unsicherer Bereiche werden diese Daten für verschiedene Zeitpunkte im Lebenszyklus des Bauwerkes ermittelt und in Relation betrachtet. Monitoringbasiert werden hierfür Kenndaten des Tragsystems ermittelt und Beanspruchungen durch ergänzende Simulationen des aktuellen Verkehrs abgeleitet. Das Monitoringkonzept sieht den Erkenntnissen der Literaturanalyse folgend dieses Vorgehen als Interaktion von Rechnung, Messung und Auswertung vor. Die Untersuchungen werden in diesem Projekt theoretisch geführt, die empfohlenen Auswertealgorithmen zur monitoringbasierten Bewertung von Tragfähigkeit und Restnutzungsdauer für balkenartige Spannbetontragwerke auf Basis von Beispielen anderer Projekte rechnerisch erprobt.
Die hier vorgestellten Forschungsprojekte hatten die Aufgabenstellung, - sinnvolle Obergrenzen für den biogenen Blend-Anteil im Kraftstoff aus ökonomisch-technischer Sicht aufzuzeigen sowie - technische Anforderungen an Pkw aus Altbestand und Neufahrzeugen für den Betrieb mit solchen Kraftstoff-Blends zu untersuchen, insbesondere in Hinblick auf Aspekte der Dauerhaltbarkeit. Auf Basis einer umfangreichen Literaturrecherche wurden zunächst sinnvolle Beimischungen ermittelt, die in 5 Fahrzeugen (3 Otto-Pkw, 2 Diesel-Pkw) auf einem Abgasrollenprüfstand getestet wurden. Anschließend wurden zwei Fahrzeuge einer Dauerlaufuntersuchung (ca. 80.000 km) unterzogen. Hierbei wurden u. a. Emissionsverhalten, Kraftstoffverbrauch und Motorleistung bewertet und Motorölproben entnommen. Am Ende der Dauerlaufuntersuchungen wurden bei beiden Fahrzeugen Motor und Kraftstoffsystem sorgfältig inspiziert. Aus fahrzeugtechnischer Sicht begrenzen bei Biodiesel vor allem die Ölverdünnung sowie der Anstieg der NOx-Emissionen den maximal möglichen Beimischungsanteil. Bei Bio-Alkohol sind insbesondere die Materialverträglichkeit und der Kraftstoffverbrauch limitierende Faktoren für erhöhte Beimischungen. Obwohl die betrachteten Euro-5-Fahrzeuge nicht für den Betrieb mit erhöhten Beimengungen an Biokraftstoffen ausgelegt waren, wurden die maßgeblichen Grenzwerte für die limitierten Emissionen im Verlauf der Untersuchungen nicht überschritten. Mit Ausnahme von NOx bei den Dieselfahrzeugen wurden darüber hinaus sogar die Euro-6-Grenzwerte unterschritten.