Sonstige
Filtern
Erscheinungsjahr
- 2017 (119)
- 2015 (101)
- 2013 (99)
- 2009 (78)
- 2010 (77)
- 2016 (69)
- 2007 (67)
- 2005 (59)
- 2014 (55)
- 2008 (51)
- 2011 (37)
- 2012 (32)
- 2004 (30)
- 2006 (29)
- 2018 (28)
- 1991 (25)
- 1988 (19)
- 1989 (16)
- 1992 (16)
- 1990 (15)
- 1987 (14)
- 2003 (13)
- 1998 (9)
- 2019 (9)
- 1986 (6)
- 1995 (5)
- 2002 (5)
- 2000 (4)
- 1976 (3)
- 1979 (3)
- 1996 (3)
- 2001 (3)
- 1981 (2)
- 1982 (2)
- 1985 (2)
- 1999 (2)
- 1978 (1)
- 1997 (1)
Dokumenttyp
- Buch (Monographie) (563)
- Konferenzveröffentlichung (404)
- Wissenschaftlicher Artikel (92)
- Bericht (23)
- Teil eines Buches (Kapitel) (14)
- Arbeitspapier (13)
Sprache
- Deutsch (771)
- Englisch (337)
- Mehrsprachig (1)
Schlagworte
- Germany (575)
- Deutschland (574)
- Research report (413)
- Forschungsbericht (411)
- Conference (329)
- Konferenz (325)
- Accident (229)
- Unfall (229)
- Safety (225)
- Sicherheit (223)
Institut
- Sonstige (1109) (entfernen)
Diese Studie befasst sich mit CO2-Reduktionspotenzialen von schweren Nutzfahrzeugen. In einer Literaturrecherche wurden zunächst Sattelzüge, Verteiler-Lkw, Busse im Stadtverkehr sowie Reisebusse betrachtet. Ziel war es, technische Möglichkeiten zur Reduzierung von CO2-Emissionen für die ausgewählten Fahrzeugkategorien zu ermitteln und deren Einsparpotentiale über die jeweiligen Einsatzarten aufzuschlüsseln. Dabei zeigten sich weitestgehend ungenutzte Einsparmöglichkeiten, beispielsweise durch Fahrwiderstandsoptimierung bei Sattelzügen, durch Rekuperation von Bremsenergie bei Stadtbussen und Verteiler-Lkw, oder auch durch bedarfsgerechte Ansteuerung von Nebenverbrauchern bei Stadt- und Reisebussen. Nähere Betrachtung fanden Maßnahmen zur CO2- Reduktion bei Sattelzügen. So wurde an einem Euro-V-EEV-Sattelzugprototyp in Fahrwiderstandsmessungen die Verbesserung des Luftwiderstands durch aerodynamische Anbauteile für Auflieger quantifiziert. Deren Verbrauchseinsparpotenziale wurden anschließend in validierten Verbrauchssimulationen, welche einen etablierten Verbrauchstest (VerkehrsRundschau-Test) virtuell abbilden, quantifiziert. Ferner zeigte eine Kosten-Nutzen-Rechnung die Effektivität der untersuchten Maßnahmen auf. Der Prototyp wurde anschließend dem realen VerkehrsRundschau-Test einmal in Ausgangskonfiguration und einmal mit einem zuvor bereits im Rahmen der Fahrwiderstandsmessungen untersuchten aerodynamischen Maßnahmenpaket, bestehend aus Seitenverkleidung und Heckeinzugsklappen, unterzogen. Hierbei zeigte sich eine mögliche CO2-Reduktion von 4,8 %. Die gemessene Einsparung lag damit oberhalb der zuvor im Rahmen der Verbrauchssimulation prognostizierten.
Derzeit beruht das Erhaltungsmanagement von Brücken vornehmlich auf turnusmäßigen visuellen Bauwerksprüfungen. Schäden werden häufig erst entdeckt, wenn sie offensichtlich sind - was unwirtschaftlich ist. Schäden und kritische Reaktionen des Bauwerks kündigen sich allerdings oftmals schon im Inneren der Struktur, in nicht einsehbaren Bereichen und durch die tatsächlich vorliegenden, aber oft nicht genau bekannten Einwirkungen auf das Bauwerk an. Bestands- und Neubau-Brücken sollten daher in der Lage sein, bereits frühzeitig und ergänzend zu den Bauwerksprüfungen Auskunft über ihren Zustand und dessen Entwicklung geben zu können. Benötigt werden hierzu flexible und modular anpassbare Systeme zur messtechnischen Unterstützung in und am Bauwerk, differenzierte Bewertungsverfahren und ein entsprechend erweitertes Erhaltungsmanagement. Hinsichtlich einer messtechnischen Instrumentierung am Bauwerk sind zum einen leistungsfähige und dauerhafte Sensorik zur Erfassung von Einwirkungen und Bauteilreaktionen an diesem sowie zum anderen eine intelligente Messdatenverarbeitung zur Plausibilisierung, Fusion, Interpolation und Reduktion von Sensordatenströmen vor Ort erforderlich. Der Beitrag fasst im Rahmen aktueller Forschung untersuchte Ansätze und Realisierungsmöglichkeiten zur Sensordatenanalyse und -überwachung - wie sie insbesondere zur Sicherstellung belastbarer, stark fehlerminimierter Zustandsinformationen erforderlich sind - unter praktischen Gesichtspunkten einer Umsetzung bei der Überwachung von Brückenbauwerken zusammen. Verschiedene Verfahrensansätze werden hinsichtlich Einsatzbereich, Aufwand und Nutzen diskutiert. Die gewonnenen Erkenntnisse sind von allgemeiner Bedeutung und daher auf andere Bereiche des Erhaltungsmanagements von Infrastruktur übertragbar.
The term test procedure refers to a method that describes how a system has to be tested to identify and assess specific behavior or properties by experiments. This also includes the specification of required tools, equipment, boundary conditions, and evaluation methods. Test procedures are an essential tool to check whether desired product properties are present, which of course also applies to the development of driver assistance systems. In addition to development and release testing that mainly is performed by the vehicle or system manufacturer, there are tests with the purpose of an independent product testing that are conducted by external test organizations. These tests are needed for vehicle type approval (for admission to a specific market), in the context of applying the standard for functional safety (in both cases mainly executed by technical services (being accredited as certification laboratory)) or for customer information purposes (by a test institute for consumer protection). The focus of this chapter is these "external" test methods. After a taxonomy of test procedures, the differences between legislation (type approval) and consumer testing are highlighted. Typical tests and the associated test setup, tools, and assessment criteria are discussed, and an outlook toward testing in the near and mid-future is given.
Side-impact safety of passenger cars is assessed in Europe in a full-scale test using a moving barrier. The front of this barrier is deformable and represents the stiffness of an 'average' car. The EU Directive 96/27/EC on side impact protection has adopted the EEVC Side Impact Test Procedure, including the original performance specification for the barrier face when impacting a flat dynamometric rigid wall. The requirements of the deformable barrier face, as laid down in the Directive, are related to geometrical characteristics, deformation characteristics and energy dissipation figures. Due to these limited requirements, many variations are possible in designing a deformable barrier face. As a result, several barrier face designs are in the market. However, research institutes and car manufacturers report significant difference in test results when using these different devices. It appears that the present approval test is not able to distinguish between the different designs that may perform differently when they impact real vehicles. Therefore, EEVC Working Group 13 has developed a number of tests to evaluate the different designs. In these tests the barrier faces are loaded and deformed in a specific and/or more representative way. Barrier faces of different design have been evaluated. In the paper the set-up and the reasoning behind the tests is presented. Results showing specific differences in performance are demonstrated.
Ein wichtiges Ziel von Streckenbeeinflussungsanlagen (SBA) ist die Erhöhung der Verkehrssicherheit. Dies kann nicht nur durch dynamische Reaktionen auf vorherrschende Verkehrszustände, sondern auch aufgrund von Informationen zu aktuellen Umfeldbedingungen wie Niederschlagsintensität, Sichtweite und Wasserfilmdicke erreicht werden. Kritische Situationen müssen von den entsprechenden Sensoren ausreichend genau und schnell erkannt werden, wobei die Zuverlässigkeit dieser Sensoren nur unter realen Bedingungen getestet werden kann. Hierfür wurde bei München ein Testfeld aufgebaut, sodass den Herstellern dezidierte Rückmeldungen bezüglich möglicher Schwächen gegeben werden können und letztendlich die Eignung verschiedener Sensoren und Erfassungstechnologien für den Einsatz in SBA eingeschätzt werden kann.
Testverfahren zur Bewertung und Verbesserung von Kinderschutzsystemen beim Pkw-Seitenaufprall
(2003)
Die gegenwärtige europäische Regelung zur Prüfung und Zulassung von Kinderschutzsystemen (KSS) für Pkw (ECE-R44-03) beinhaltet dynamische Tests zur Frontal- und Heckaufprallsimulation. Der Seitenaufprall ist bisher nicht berücksichtigt, obwohl die Verletzungsschwere und die Folgekosten groß sind. Im Gegensatz zum Frontal- und Heckaufprall ist der Seitenaufprall gekennzeichnet durch eine direkte Lasteinleitung durch intrudierende Strukturen. Das Kinderschutzsystem und das Kind werden durch große Kontaktkräfte direkt beaufschlagt. Verletzungen des Kopfes und Halsbereichs von Kindern in KSS sind hierbei häufig und schwer. Seit 1993 beschäftigt sich daher eine ISO-Arbeitsgruppe (International Standardization Organisation) mit der Entwicklung eines Testverfahrens zur Prüfung von KSS beim Seitenaufprall. Die Ziele und entsprechende Ideen sowie Konzepte beteiligter Parteien sind bis heute kontrovers, so dass bisher keine endgültige Einigung im Rahmen der Arbeitsgruppe erzielt werden konnte. Ziel der vorliegenden Arbeit als Abschluss eines Projekts der BASt (Bundesanstalt für Straßenwesen) und dem Fachgebiet Kraftfahrzeuge der TU Berlin ist es, die komplexe Problematik zu dem Thema umfassend darzustellen und gleichzeitig einen ganzheitlichen Lösungsvorschlag anzubieten. Hierzu sind die Teilergebnisse der ISO-Arbeitsgruppe im ersten Schritt strukturiert und analysiert worden. Wissenslücken wurden detektiert und in einem weiteren Schritt beseitigt. Alle Teilergebnisse wurden im Rahmen der ISO-Arbeitsgruppe präsentiert, diskutiert und größtenteils auch akzeptiert. Der aktuelle Stand der ISO-WG1 ist somit maßgeblich von den hier erzielten Ergebnissen beeinflusst. Als Kern der vorliegenden Arbeit ist an der TU Berlin das Konzept für ein Testverfahren entwickelt, umgesetzt und geprüft worden. Die wesentlichen Parameter des realen Seitenaufpralls wie: - Beschleunigungsniveau des gestoßenen Pkw, - Delta-v des gestoßenen Pkw, - Maximalintrusion beim gestoßenen Pkw sowie - die maximale Intrusionsgeschwindigkeit im Kopfbereich sind wiedergegeben. In Abgrenzung zu aktuellen, komplexen Schlittentestverfahren, die z.B. zur Entwicklung von Seitenairbags dienen, ist die statische und dynamische Intrusionsgestalt einer realen Pkw-Seitenstruktur hingegen stark vereinfacht, aber ausreichend dargestellt. Die Ergebnisse zeigen, dass es prinzipiell möglich ist, das Schutzpotential von rückwärtsgerichteten sowie vorwärtsgerichteten KSS mit dieser Prozedur zu analysieren. Die Seitenaufprallabbildungsgüte ist hoch bei einer gleichzeitig sehr guten Reproduzierbarkeit der Messergebnisse. So zeigen die Tests, dass die Kinematik des Kopf- und Halsbereichs im Wesentlichen von der Gestalt des KSS im Seitenbereich abhängig ist. Ausreichend große Seitenwangen können den Kopf flächig stützen und vermeiden so den direkten Kontakt zu intrudierenden Strukturen. Gleichzeitig wird die starke laterale Inklination der Halswirbelsäule reduziert. Die Belastungen am Kopf sind aber bei allen getesteten KSS hoch und liegen deutlich oberhalb diskutierter Grenzwerte. Bei genauer Betrachtung der KSS-Seitenwangenpolsterung fällt auf, dass diese entweder gar nicht oder nur rudimentär vorhanden ist. Modifikationen, die abschließend an KSS vorgenommen wurden, zeigen aber auf, dass bereits durch einfache technische Maßnahmen die Belastungen im Kopfbereich signifikant gesenkt werden können. Das mit dieser Arbeit vorgelegte Testverfahren bietet KSS-Herstellern wie auch dem Gesetzgeber die Möglichkeit, Schwächen von KSS aufzudecken und Modifikationen zielgerichtet durchzuführen. Durch die Berücksichtigung des realen Seitenaufpralls ist gewährleistet, dass alle Optimierungen seitens der KSS-Hersteller auch positiven Einfluss auf die passive Sicherheit von Kindern in Pkw haben können. Eine maximale Reduktion der schwer bzw. tödlich verletzten Kinder als Pkw-Insassen in Höhe von ca. 10% ist bei 100%-iger Marktdurchdringung mit optimal gestalteten Produkten realistisch. Dies entspricht einer Verringerung der Anzahl getöteter Kinder um ca. 10 sowie schwerverletzter Kinder um ca. 200 pro Jahr in Deutschland.
Ziel des Forschungsprojektes ist es, die Überprüfung der Fahreignung nach Fahrerlaubnis-Verordnung (FeV), Anlage 5, auf eine operationalere Basis zu stellen, die in der FeV und den Begutachtungs-Leitlinien Kapitel 2.5 genannten Begriffe inhaltlich zu schärfen und Vorschläge für einen "Testkanon" beziehungsweise für Weiter- und Neuentwicklungen von standardisierten Tests zur Begutachtung zu erarbeiten. Bei der Analyse der derzeit eingesetzten Testverfahren zur Überprüfung der psychometrischen Leistungsfähigkeit auf Basis der von der FeV geforderten wissenschaftlichen Standardisierung und Validierung zeigt sich, dass erheblicher Optimierungsbedarf besteht, insbesondere bei der Normierung und der Dokumentation der Testgütekriterien. In Einzelfällen fehlen sogar essenzielle Angaben. Die Herleitung der zu messenden Konstrukte ist ebenfalls oft unzureichend, teilweise gar nicht dokumentiert. Die Ergebnisse der kritischen Durchsicht wurden auf einem Workshop mit Experten aus Wissenschaft und Praxis diskutiert. Als Ergebnis des Forschungsprojektes lässt sich kurzfristiger und langfristiger Optimierungsbedarf festhalten. Kurzfristig sollten die eingesetzten Testverfahren anhand vorher festgelegter Kriterien überarbeitet und an entsprechend großen repräsentativen Stichproben geeicht werden. Die Testgütekriterien müssen nachprüfbar angegeben werden. Langfristig sollten aus wissenschaftlicher Perspektive die in der FeV, Anlage 5, genannten psychologischen Konstrukte grundsätzlich überarbeitet werden. Auch sollten die in der Fahreignungsdiagnostik angewendeten Entscheidungskriterien (Prozentränge) durch absolute Kennwerte ersetzt werden, die auf dem Wissen über die Zusammenhänge zwischen Leistung und Fahreignung basieren. Ein unabhängiges wissenschaftliches Gremium sollte die Güte und Zulassung der Testverfahren regelmäßig überprüfen. In einem Teilprojekt wurde außerdem der Frage nachgegangen, inwieweit unterschiedliche Hardware- und Softwarekonstellationen die Objektivität der Reaktionszeitmessungen beeinflussen können. Die Ergebnisse zeigen, dass die zuverlässige Ermittlung von Reaktionszeiten in erster Linie von der grundsätzlichen Eichung eines Testverfahrens abhängt. Computergestützte Leistungstests sollten deshalb in vom Hersteller zugelassenen Computerumgebungen im Durchschnitt bei unterschiedlichen Konfigurationen keinen Messfehler ausweisen, um einen Nachteil für Führerscheinbewerber auszuschließen. Außerdem müssten maximal mögliche Abweichungen und Konfidenzintervalle für zugelassene Konfigurationen angegeben werden, sowie Normwerttabellen vollständig einsehbar sein.
Ziel der Gesamtstudie ist die Zusammenstellung pharmakologisch geeigneter, praktikabler Versuchsplanungen sowie Untersuchungs- und Auswerteverfahren, die zur Feststellung der Wirkung von Medikamenten auf die Fahrtüchtigkeit empfohlen werden können. Im ersten Projektabschnitt der Studie erfolgt eine Literatursichtung, die sich auf deutsch- und englischsprachige Arbeiten stützt. Es werden alle unmittelbar verfügbaren Arbeiten ab dem Veröffentlichungsjahr 1970 berücksichtigt, wobei in diesen Arbeiten der Einfluss von Medikamenten auf verkehrsrelevante Leistungs- und Persönlichkeitsbereiche mit vorwiegend psychologischen Testverfahren überprüft wird. Ein Teil der Untersuchungen weist gravierende methodische Mängel auf, die sich auf Stichprobengröße, Stichprobenauswahl, Kontrollgruppendesign, fehlende Aussagen über den Versuchsablauf sowie auf Mängel in der statistischen Auswertung beziehen. Solche methodischen Mängel machen die Entwicklung eines Untersuchungsdesigns notwendig, in das verwertbare Ergebnisse der Literaturrecherche eingehen können und mit dessen Hilfe in einem zweiten Projektabschnitt eine endgültige standardisierte Testbatterie ermittelt werden kann. Wegen der methodischen Einschränkungen wird nur eine vorläufige Testauswahl vorgeschlagen.
Aufgabe des Projektes war eine auf deutsch- und englischsprachige Autoren beschränkte Literaturrecherche mit dem Ziel, ein geeignetes Prüfverfahren aufzuzeigen, dass im Rahmen gesetzlicher Maßnahmen zum Nachweis der Fahrtüchtigkeit nach Medikamentenwirkungen als verbindlich vorgeschrieben werden kann. Der Bearbeitung lag ein theoretisches Modell zugrunde, bei dem die Fahrtüchtigkeit als ein Konstrukt aufgefasst wird, das keiner unmittelbaren Messung zugänglich ist. Es wurden deshalb in einem ersten Operationalisierungsschritt Funktionsbereiche (Prädikatoren) etabliert, die die Fahrtüchtigkeit optimal definieren. In einem zweiten Operationalisierungschritt wurden solche Prädikatoren auf Tests zurückgeführt. Es wird eine Auswahl von Tests zusammengestellt, die aufgrund bestimmter Gütekriterien für den Nachweis der Fahrtüchtigkeit nach Arzneimitteleinnahme als valide anzusehen sind. Die Tests werden nur als ein Element des gesamten Prüfverfahrens angesehen, zu dem u.a. auch der Testverlauf, die Auswahl der Stichproben sowie die Registrierung pharmakogenetischer Kenngrößen gehören. Die erste Bearbeitungsphase des Projektes führte zu dem Vorschlag eines vorläufigen Testpolls und zu Vorschlägen über die Ausgestaltung des gesamten Testverlaufs einschließlich der zu erhebenden physiologischen Parameter und pharmakologischen Kenngrößen.
Impact severity is a fundamental measure for all in-depth crash investigation projects. One methodology used in the UK is based on the US Calspan software package CRASH3. The UK- in-depth crash investigation studies routinely use AiDamage3 a software package which is based on an updated version of the original CRASH3 algorithm, including enhancements to the vehicle stiffness coefficients. Real world accident-damaged vehicles are measured and their crush is correlated with a library of stiffness coefficients. These measurements are then used, along with other parameters, to calculate the crash energy and equivalent changes of velocity of the vehicles (delta-v), which is a measure of the impact severity. UK in-depth accident studies routinely validate the crash severity methodologies applied as the vehicle fleet changes. This is achieved by analysing crash test data and using the appropriate residual crush damage and other inputs to AiDamage3 and checking the program- outputs with the known crash severity parameters. This procedure checks, at least in part, the default stiffness values in the data libraries and the reconstruction methods used.
Small overlap frontal crashes are defined by a damage pattern with most of the vehicle deformation concentrated outboard of the main longitudinal structures. These crashes are prominent among frontal crashes resulting in serious and fatal injuries, even among vehicles that perform well in regulatory and consumer information crash tests. One of the critical aspects of understanding these crashes is knowing the crash speeds that cause the types of damage associated with serious injuries. Laboratory crash tests were conducted using 12 vehicles in three small overlap test conditions: pole, vehicle-to-vehicle collinear, and vehicle-to-vehicle oblique (15-degree striking angle). Field reconstruction techniques were used to estimate the delta V for each vehicle, and these results were compared with actual delta V values based on vehicle accelerometer data. Estimated delta Vs were 50% lower than actual values. Velocity change estimates for small overlap frontal crashes in databases such as NASS-CDS significantly underestimate actual values.
Rear-end collisions are the most frequent same and opposite-direction crashes. Common causes include momentary inattention, inadequate speed or inadequate distance. While most rear-end collisions in urban traffic only result in vehicle damage or slight injuries, rear-end collisions outside built-up areas or on motorways usually cause fatal or serious injuries. Driver assistance systems that detect dangerous situations in the longitudinal vehicle direction are therefore an essential safety plus. In view of this, for ADAC, systems that alert drivers to dangerous situations and initiate autonomous braking complement ESC as one of the most important active safety features in modern vehicles. The aim of ADAC is to provide consumers with technical advice and competent information about the systems available on the market. Reliable comparative tests that are based on standardised test criteria may provide motorists with important information and help them make a buying decision. In addition, they raise consumer awareness of the systems and speed up their market penetration. The assessment must focus on as many aspects of effectiveness as possible and include not only autonomous braking but also collision warning and autonomous brake assist. The work of the ADAC accident research is the development of the testing scenarios with direct link to accident situations and the identification of useful test criteria for testing.
Past European collaborative research involving government bodies, vehicle manufacturers and test laboratories has resulted in a prototype barrier face called the Advanced European Mobile Deformable Barrier (AE-MDB) for use in a new side impact test procedure . This procedure offers a better representation of the current accident situation and, in particular, the barrier concept is a better reflection of front-end stiffness seen in today- passenger car fleet compared to that of the current legislative barrier face. Based on the preliminary performance corridors of the prototype AE-MDB, a refined AE-MDB specification has been developed. A programme of barrier to load cell wall testing was undertaken to complete and standardise the AE-MDB specification. Barrier faces were supplied by the four leading manufacturers to demonstrate that the specification could be met by all. This paper includes background, specification and proof of compliance.
Bicyclists are minimally or unprotected road users. Their vulnerability results in a high injury risk despite their relatively low own speed. However, the actual injury situation of bicyclists has not been investigated very well so far. The purpose of this study was to analyze the actual injury situation of bicyclists in Germany to create a basis for effective preventive measures. Technical and medical data were prospectively collected shortly after the accident at the accident scenes and medical institutions providing care for the injured. Data of injured bicyclists from 1985 to 2003 were analyzed for the following parameters: collision opponent, collision type, collision speed (km/h), Abbreviated Injury Scale (AIS), Maximum AIS (MAIS), incidence of polytrauma (Injury Severity Score >16), incidence of death (death before end of first hospital stay). 4,264 injured bicyclists were included. 55% were male and 45% female. The age was grouped to preschool age in 0.9%, 6 to 12 years in 10.8%, 13 to 17 years in 10.4%, 18 to 64 years in 64.7%, and over 64 years in 13.2%. The MAIS was 1 in 78.8%, 2 in 17.0%, 3 in 3.0%, 4 in 0.6%, 5 in 0.4%, and 6 in 0.2%. The incidence of polytrauma was 0.9%, and the incidence of death was 0.5%. The incidence of injuries to different body regions was as follows: head, 47.8%; neck, 5.2%, thorax, 21%; upper extremities, 46.3%; abdomen, 5.8%; pelvis, 11.5%, lower extremities, 62.1%. The accident location was urban in 95.2%, and rural in 4.8%. The accidents happened during daylight in 82.4%, during night in 12.2%, and during dawn/dusk in 5.3%. The road situation was as follows: straight, 27.3%; bend, 3.0%; junction, 32.0%; crossing, 26.4%; gate, 5.9%; others, 5.4%. The collision opponents were cars in 65.8%, trucks in 7.2%, bicycles in 7.4%, standing objects in 8.8%, multiple objects in 4.3%, and others in 6.5%. The collision speed was grouped <31 in 77.9%, 31-50 in 4.9%, 51-70 in 3.7%, and >70 in 1.5%. The helmet use rate was 1.5%. 68% of the registered head injuries were located in the effective helmet protection area. In bicyclists, head and extremities are at high risk for injuries. The helmet use rate is unsatisfactorily low. Remarkably, two thirds of the head injuries could have been prevented by helmets. Accidents are concentrated to crossings, junctions and gates. A significant lower mean injury severity was observed in victims using separate bicycle lanes. These results do strongly support the extension or addition of bicycle lanes and their consequent use. However, the lanes are frequently interrupted at crossings and junctions. This emphasizes also the important endangering of bicyclists coming from crossings, junctions and gates, i.e. all situations in which contact of bicyclists to motorized vehicles is possible. Redesigning junctions and bicycle traffic lanes to minimize the possibility of this dangerous contact would be preventive measures. A more consequent helmet use and use and an extension of bicycle paths for a better separation of bicyclists and motorized vehicle would be simple but very effective preventive measures.
The current Brussels EU Regulation No. 1235/2011, valid from May 30, 2012, has introduced an European Tyre Label with wet grip index G classes from A to G for passenger car tyres C1, light commercial vehicles tyres C2 and heavy truck- and bus tyres C3. Every wet grip class for each vehicle category has a defined band of numerical values for the wet grip index G. The legislated wet grip values G in this EU- Regulation are very low. The measured braking distances and corresponding impact speeds of the test vehicles are showing very critical results. Regulation No. 1235/2011 of the European Parliament and the Council for Type Approval of Vehicles (EU) should be changed in such a way, that for C1-tyres (normal passenger cars tyres) the minimum wet grip index G is 1.25. All C2-tyres (light commercial vehicles tyres) should at least meet a minimum wet grip index of G = 1.1. All C3-tyres (heavy trucks and buses tyres) should at least meet a minimum wet grip index of G = 0.95. Due to the missing lower limits for G in the wet grip class F for C1, C2 and C3 tyres according to Commission Regulation (EU) No. 1235/2011, officially valid from 30 May 2012, a tyre-to-road coefficient of adhesion in the extreme of 0 (zero) is legally permitted. This is an apparent flaw in above cited EU Regulation, which causes a potential danger to the road traffic safety for all motor vehicles in Europe with such tyres. The wet grip class F has to be removed urgently from said EURegulation, since a direct liability of the responsible EU-Commission can not be excluded.
This study is aimed to investigate the correlations of impact conditions and dynamic responses with the injuries and injury severity of child pedestrians by accident reconstruction. For this purpose, the pedestrian accident cases were selected from Sweden and Germany with detailed information about injuries, accident cars, and accident environment. The selected accident cases were reconstructed using mathematical models of pedestrian and passenger car. The pedestrian models were generated based on the height, weight, and age of the pedestrian involved in accidents. The car models were built up based on the corresponding accident car. The impact speeds in simulations were defined based on the reported data. The calculated physical quantities were analyzed to find the correlation with injury outcomes registered in the accident database. The reconstruction approaches are discussed in terms of data collection, estimating vehicle impact speeds, pedestrian moving speeds and initial posture, secondary ground impact, validity of the mathematical models, as well as impact biomechanics.
During the last 5 years, the number of cars fitted with side airbags has dramatically increased. They are now standard equipment, even on many smaller cars or less luxurious vehicles. While some side airbags offer thoracic protection alone, there are those that combine thoracic and head protection (of which most deploy from the seat). Other systems employ separate airbags for head and thorax protection, which are designed to be effective noticeably in a crash against a pole. This paper proposes an evaluation of the effectiveness of side airbags in preventing thoracic injuries to passenger car occupants involved in side crashes. First, the target population (who can take benefit of side airbag deployment and in what circumstances) is defined. Side airbags can be especially effective in cases of impacts on the door with intrusion at a certain impact speed. Then, an example case of a side impact with side airbag deployment is given were side airbag deployment is thought to have had a positive effect on injury outcome. A further case is presented where the impact configuration is likely to have reduced the effect of side airbag deployment on injury outcome. Finally, the estimation of side airbag effectiveness (in terms of additional occupant protection brought exclusively by the airbag) is proposed by comparing injury risk sustained by occupants in (more or less) similar cars (fitted or non fitted with airbags) because, during these years, car structure, and side airbag conception have considerably evolved. In-depth accident data from France, the UK and Germany has been collected. Out of 2,035 side impact accident cases available in the databases, we selected 435 occupants of passenger cars (built from 1998 onwards) involved in an injury accident between year 1998 and year 2004 for EES (Energy Equivalent Speed) values between 20km/h and 50km/h. The occupants, belted or not, were sat on the struck side, whatever the obstacle and type of accidents (intersection, loss of control, etc.). For multiple impact crashes, the side impact is assumed to be the more severe one. Passenger cars were fitted with (96) or without (339) side airbags. Most of the potential risk explanatory variables were correctly and reliably reported in the databases (velocity " impact zone " impact angle " occupant characteristics, etc.). The analysis compared injury risks for different levels of EES and different types of side airbags. A logistic regression model was also computed with injury variables (such as thoracic AIS 2+ or AIS 3+) as the dependant variable and other variables (including airbag type and EES) as explanatory injury risk factors. Results revealed statistically non-significant reductions in thoracic AIS 2+ and AIS 3+ injury risk in side airbag equipped cars in the impact violence range selected (odds ratio between 0.84 and 0.98 depending on types of airbags). The results are discussed. The non-significance is assumed to be due to a low number of cases. Statistical analysis for head injuries was not possible due to the low number of accident cases with passenger cars fitted with head airbags in the databases. Moreover, the discrepancies between the data coming from different countries (especially calculation of EES) might have introduced instability in the analysis.
Various kinds of demerit point systems have been developed and implemented in European countries, aimed at tackling repeat offences in road transport by acting as a deterrent and providing sanctioning. The impact of a demerit point system on the number of crashes is often reported to be significant, but temporary. The objective of the EU BestPoint project was to establish a set of recommended practices that would result in a more effective and sustainable contribution of demerit point systems to road safety. A high actual chance of losing the licence and a high perceived chance of losing the licence are basic prerequisites for the effective operation of demerit point systems. For measures applied within the context of a demerit point system, a four-step-approach is recommended: warning letter, driver improvement course, licence withdrawal, rehabilitation course. Further recommendations concern issues like points and offences, e.g. which offences should lead to points, target groups, and the administration of demerit point systems. The final result of the EU BestPoint project is a handbook (van Schagen & Machata, 2012) which provides a concise overview of all recommended practices. The presentation/paper outlines how sustainable safety improvements can be achieved if national demerit point systems are implemented and maintained according to the recommended practices. In addition, potential further steps towards an EU-wide demerit point system (cross-border exchange on points and/or offences) are presented.
Established in 1997, the European New Car Assessment Programme (Euro NCAP) provides consumers with a safety performance assessment for the majority of the most popular cars in Europe. Thanks to its rigorous crash tests, Euro NCAP has rapidly become an important driver safety improvement to new cars. After ten years of rating vehicles, Euro NCAP felt that a change was necessary to stay in tune with rapidly emerging driver assistance and crash avoidance systems and to respond to shifting priorities in road safety. A new overall rating system was introduced that combines the most important aspects of vehicle safety under a single star rating. The overall rating system has allowed Euro NCAP to continue to push for better fitment and higher performance for vehicles sold on the European market. In the coming years, the safety rating is expected to play an important role in the support of the roll-out of highly automated vehicles.
Automated driving will provide many kinds of benefits - some direct and some indirect. The benefits originate at the individual level, from changes in the behaviour of drivers and travellers with regard to driving and mobility, ending up with benefits at the social level via changes in the whole transport system and society, where many of the current planning and operations paradigms are likely to be transformed by automated driving. There may also be disbenefits, particularly at a social level, for example in intensity of travel which could result in additional congestion and increased use of natural resources. There may also be unintended consequences. For example, we do not know the impacts on public transport: driverless vehicles could provide a means to a lower cost service provision, but the availability of automated cars could lead to more car travel at the expense of collective transport.