Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
- Buch (Monographie) (563)
- Konferenzveröffentlichung (404)
- Wissenschaftlicher Artikel (92)
- Bericht (23)
- Teil eines Buches (Kapitel) (14)
- Arbeitspapier (13)
Sprache
- Deutsch (771)
- Englisch (337)
- Mehrsprachig (1)
Schlagworte
- Germany (575)
- Deutschland (574)
- Research report (413)
- Forschungsbericht (411)
- Conference (329)
- Konferenz (325)
- Accident (229)
- Unfall (229)
- Safety (225)
- Sicherheit (223)
Institut
- Sonstige (1109) (entfernen)
This work describes the results of the experimental activity, illustrating the driving behavior observed in different conditions, relating them to the different methods of ADAS intervention and comparing the driver behavior without ADAS. In the present study, driver behavior was studied in road accidents involving elderly pedestrians, with different ADAS HMIs, as a base to develop a driver model in near missing pedestrian accidents. A literature research was conducted with the aim of finding out the main influencing factors, including environment, boundary conditions, configuration of impact, pedestrian and driver information, when pedestrian fatalities occur and an analysis of frequent road accidents was conducted to get more detailed information about the driver- behavior. In order to obtain more detailed information about pedestrian accidents, real road accidents were reconstructed with multibody simulations on PC-Crash and, by the comparison between literature findings and reconstructions, a generic accident scenario was defined. The generic accident scenario was implemented on the full scale dynamic driving simulator in use at the Laboratory for Safety and Traffic Accident Analysis (LaSIS, University of Florence, Italy) in order to analyse the driving behaviors of volunteers, also considering the influence of ADAS devices. Forty-five young volunteers were enrolled for this study, resulting in forty valid tests on different testing scenarios. Two different scenarios consisted in driving with or without ADAS in the vehicle. Different kinds of ADAS, acoustic and optical, with different time of intervention were tested in order to study the different reactions of the driver. The tests showed some interesting differences between driver's behavior when approaching the critical situation. Drivers with ADAS reacted earlier, but more slowly, depending also on the type of alarm, and often with double reaction when braking. In fact, the results of the activity showed that with ADAS intervention the time to collision (TTC) increases, but the reaction time and braking modality change: a) there is a sort of "latency" time between the accelerator pedal release and the brake pressure; b) the brake pressure is initially less intense. So the driver only partially takes advance from the TTC increase. These differences were valued not only qualitatively, but quantitatively as well. This work revealed to be useful to improve the knowledge of drivers" behavior, in order to realize a driver model that can be implemented to help attaining and assessing higher levels of automation through new technology.
Ein selbstverständliches Mittel zur Senkung von nächtlichen Verkehrsunfällen ist die ortsfeste Straßenbeleuchtung. Bei Einsparbestrebungen in den öffentlichen Haushalten wird oft versucht, das Niveau der Straßenbeleuchtung herunterzuschrauben. In einem Forschungsvorhaben sollte deshalb untersucht werden, wie sich Beleuchtungsänderungen auf das Unfallgeschehen auswirken. Das Vorhaben war als Vorher-/Nachher-Studie angelegt, die in 6 deutschen Städten auf je 10 Untersuchungs- und Kontrollstrecken stattfand. Auf den Untersuchungsstrecken wurde die Beleuchtung zu einem bestimmten Zeitpunkt verändert, auf den Kontrollstrecken unterblieb diese Veränderung. Ergebnis der Studie ist, dass die Unfälle besonders in der verkehrsschwachen Zeit von 23 bis 5 Uhr zurückgingen. Die Anzahl aller Unfälle ging um (nicht signifikante) 28 Prozent, die der Fußgänger- und Radfahrerunfälle um (signifikante) 68 Prozent zurück. Auch die Zahl der Verletzten sank um (nicht signifikante) 45 Prozent. Diese Ergebnisse bestätigen tendenziell die Resultate vieler anderer Studien, dass Abschalten oder selbst Reduzierung der Straßenbeleuchtung das Unfallrisiko erhöht. Das gilt gerade auch für die verkehrsschwachen Nachtstunden.
Neben Ermüdungsschäden an orthotropen Fahrbahnplatten sind bei Stahlbrücken auch Schäden an nicht direkt befahrenen Konstruktionsteilen der Quersysteme (Kategorie-3-Schäden) festgestellt worden. Das stetig steigende Verkehrsaufkommen führt zu einer Verschärfung des Problems, so dass die Dauerhaftigkeit betroffener Brückenkonstruktionen auch durch diese Schäden gefährdet wird. Anhand ausgewählter Beispiele aus der Literatur und Praxis der Straßenbauverwaltungen werden Kategorie-3-Schäden systematisch untersucht. Die Erfahrungen werden zusammengestellt, ausgewertet und typisiert. Die wesentlichen Ursachen sind Überbeanspruchungen, ermüdungsanfällige Konstruktionsweisen, mangelnde Ausführungsqualität und Modellierungsfehler bei den Berechnungen. Eine Verknüpfung typischer Schadensbilder mit allgemeinen Ursachen ist in gewissem Umfang möglich, so dass der Bericht eine erste Hilfestellung bei der Behandlung von Kategorie-3-Schäden sein kann. Weiterhin werden ausgeführte und weitere Instandsetzungs- und Ertüchtigungsvarianten an stählernen Balkenbrücken mit Hohlkasten- und offenem Querschnitt in allgemeiner Form mit numerischen FE Berechnungen untersucht, um Vor- und Nachteil herauszustellen. Es zeigt sich, dass eine möglichst gleichmäßige Steifigkeitsverteilung im Aussteifungssystem anzustreben ist. Aber auch mit verkehrsleitenden Maßnahmen wie eine Verlegung der Fahrstreifen ohne Eingriff in das Tragwerk lassen sich die kritischen Beanspruchungen u.U. deutlich reduzieren. Ein besonderes Augenmerk wird in diesem Bericht auf die Bauwerkserhaltungsmaßnahme, vollständig auf aussteifende Verbände zu verzichten, gelegt. Der Formerhalt des Brückenquerschnitts wird dabei ausschließlich über die Rahmenwirkung der Quersysteme realisiert. Umfangreiche numerische Untersuchungen beleuchten die Spannungsänderungen der kritischen Details, aber auch mögliche Umlagerungen im gesamten Tragwerk durch die Änderung des Aussteifungssystems. Weiterhin werden auch experimentelle Untersuchungen angestellt, um die Wirksamkeit und Effizienz dieser Variante zu bewerten. Schließlich werden die untersuchten Ertüchtigungs- und Instandsetzungsvarianten bewertet und es werden allgemeine Empfehlungen zur Behandlung von Kategorie-3-Schäden gegeben.
Rear-end collisions are the most frequent same and opposite-direction crashes. Common causes include momentary inattention, inadequate speed or inadequate distance. While most rear-end collisions in urban traffic only result in vehicle damage or slight injuries, rear-end collisions outside built-up areas or on motorways usually cause fatal or serious injuries. Driver assistance systems that detect dangerous situations in the longitudinal vehicle direction are therefore an essential safety plus. In view of this, for ADAC, systems that alert drivers to dangerous situations and initiate autonomous braking complement ESC as one of the most important active safety features in modern vehicles. The aim of ADAC is to provide consumers with technical advice and competent information about the systems available on the market. Reliable comparative tests that are based on standardised test criteria may provide motorists with important information and help them make a buying decision. In addition, they raise consumer awareness of the systems and speed up their market penetration. The assessment must focus on as many aspects of effectiveness as possible and include not only autonomous braking but also collision warning and autonomous brake assist. The work of the ADAC accident research is the development of the testing scenarios with direct link to accident situations and the identification of useful test criteria for testing.
For more than a decade, ADAC accident researchers have analysed road accidents with severe injuries, recording some 20,000 accidents. An important task in accident research is to determine the causative factors of road accidents. Apart from vehicle engineering and human factors, accident research also focuses on infrastructural and environmental aspects. To find out what accident scenarios are the most common in ADAC accident research and what driver assistance systems can prevent them, our first task was to conduct a detailed accident analysis. Using CarMaker, we performed a realistic simulation of accident scenarios, including crashes, with varying parameters. To begin with, we made an initial selection of driver assistance systems in order to determine those with the greatest accident prevention potential. One important finding of this study is that the safety potential of the individual driver assistance systems can actually be examined. It also turned out that active safety offers even much more potential for development and innovation than passive safety. At the same time, testing becomes more demanding, too, as new systems keep entering the market, many of them differing in functional details. ADAC will continue to test all driver assistance systems as realistically as possible so as to be able to provide advice to car buyers. Therefore, it will be essential to develop and improve test conditions and criteria.
Every second counts when human lives are at stake. The increasingly safe design of vehicles presents rescuers with a serious challenge. Faced with high-strength steels and body reinforcements, even the most powerful cutters reach their limits. Therefore, incident commanders require information on the technical features and components installed, directly in the vehicle. Several tests have shown that such information helps to save valuable minutes. Therefore, a standardised A4 "rescue sheet" containing information on the location of cabin reinforcements, the tank, the battery, airbags, gas generators, control units etc. " and indicating adequate cutting points must be used throughout Europe. Hopefully, in a few years, the new eCall emergency call system will be in place everywhere in Europe. The system will transmit the relevant vehicle-specific data directly to the rescuers on-site. Until then, we need a simple and effective solution that saves lives.
The GIDAS-investigation team of Dresden (VUFO) has documented more than 11.500 accidents since 1999. The documentation of the accident includes beside vehicle-, injury- and environmental-data very detailed reconstruction data. Within this accident investigation the VUFO began to record the skid resistance of the accident site in 2009. The measurements are divided in macro- and microroughness (Sand depth method and Portable Skid Resistance Tester-SRT-by Munro-Stanley London-©). Both methods are used to determine the skid resistance for more than 1000 passenger cars. The aim of the present study is to find out a relationship between the measured skid resistance, the road conditions and the friction coefficient, which is used to calculate the maximum accelerations and decelerations during a reconstruction of an accident. Basic approach to convert the SRT-value into the friction coefficient is the calculation of the theoretical absorbed energy of the spring rubber system of the swinging arm of lever. This absorbed energy is used to get the friction coefficient by using the equations for the work of friction. To consider the road-behavior, in correlation to the friction coefficient, the results will be merged with existing literature. Last step for this study will be a comparison between actual used friction coefficients all over the GIDAS-database and the theoretical results. The study shows, if it is possible to use the SRT-Measurement for the estimation of a friction coefficient for the reconstruction of a traffic accident. As expected, the GIDAS-Database and the additional measurement of the roughness of the road directly on the spot are an enormous useful dataset.
The Traffic Accident Research Institute at University of Technology Dresden investigates about 1,000 accidents annually in the area around and in Dresden. These datasets have been summarized and evaluated in the GIDAS (German Accident In-Depth Study) project for 13 years. During the project it became apparent that the specific traffic situation of a covert exit of a passenger car and an intersecting two-wheeler involves a high risk potential. This critical situation develops in a large part due to the lack of visibility between the driver and the intersecting bike. In this paper the accident avoidance potential of front camera systems with lateral field of view, which allows the driver to have an indirect sight into the crossing street area will be presented.
Entgegen populären Meinungen, welche älteren Kraftfahrern ein generelles Gefahrenpotenzial für die allgemeine Verkehrssicherheit zuschreiben, weisen die Unfallstatistiken eher auf eine besondere Gefährdung dieser Gruppe von Verkehrsteilnehmern hin, woraus sich Forderungen nach einer zielgruppenspezifischen Verkehrssicherheitsarbeit begründen. Maßnahmen zur Erhöhung der Verkehrssicherheit sollten sich nicht auf einzelne Ansatzpunkte beziehen, sondern integrativ die Verhaltenspotenziale auf Seiten des älteren Fahrers selbst und auch die Kontextfaktoren der Fahrsituation berücksichtigen. Zudem sollten Verkehrssicherheitsmaßnahmen für ältere Fahrer auf einen möglichst langen, aber auch sicheren Erhalt der Fahrkompetenz zielen und somit einen Beitrag zur individuellen Lebensqualität und gesellschaftlichen Teilhabe leisten. Neben einem stärkeren Einbezug älterer Menschen in die Planung verkehrssicherheitsrelevanter Maßnahmen und damit einer bedarfsgerechteren Gestaltung, sollte dabei auch verstärkt auf die Eigenverantwortung des älteren Fahrers referiert werden. Die Ergebnisse von Forschungsprojekten welche modellhaft Angebote zur freiwilligen Selbstprüfung der Fahrkompetenz unterbreiteten beziehungsweise die Meinung älterer Fahrer zu Angeboten dieser Art erfassten, weisen darauf hin, dass das Interesse innerhalb der Zielgruppe durchaus vorhanden ist. Es scheint angezeigt das Eigeninteresse älterer Kraftfahrer aufzugreifen und das Angebot personenzentrierter Ansätze zur Erhöhung der Verkehrssicherheit, wie beispielsweise freiwillige Überprüfungen der Fahrkompetenz und Schulungen zur Erhaltung der Fahrkompetenz, auszuweiten. Bei der Ausarbeitung verkehrsplanerischer Konzepte sollte zukünftig auch verstärkt den zu erwartenden demographischen Veränderungen der Verkehrsteilnehmer Rechnung getragen werden und durch eine weniger komplexe Gestaltung die Nutzungsbedingungen - nicht nur zugunsten älterer Fahrer - sondern im Sinne eines transgenerationalen Designs für alle Fahrer optimiert werden. Zudem sollte durch eine stärkere Berücksichtigung alternativer Mobilitätsformen zum Auto dazu beigetragen werden, dass wenn tatsächlich die Kompensationsspielräume ausgeschöpft sein sollten, für den älteren Menschen geeignete Mobilitätsalternativen verfügbar sind und der Verzicht auf die Automobilität nicht gleichbedeutend mit einer Aufgabe der Mobilität ist.
Ab einer Konzentration des Cannabiswirkstoffes Tetrahydrocannabinol (THC) von 1,0 ng/ml im Blutserum kann das Vorliegen verkehrsmedizinisch relevanter Leistungsdefizite nicht ausgeschlossen werden; daher gilt ab diesem Wert der objektive Tatbestand des -§ 24a (2) StVG als erfüllt. In Abhängigkeit von der Konsumfrequenz kann es aber sein, dass eine derartige Konzentration auf einen Konsum zurückgeht, der mehr als 24 Stunden vor der Fahrt stattgefunden hat. Da in diesem Fall sicher keine relevante Cannabiswirkung mehr vorliegt, sind THC-Konzentrationen, die nur wenig oberhalb von 1,0 ng/ml im Blutserum liegen, nicht als Beweis für eine mangelnde Trennung von Konsum und Fahren anzusehen, und ein Direktentzug der Fahrerlaubnis erscheint nicht ohne Weiteres gerechtfertigt. Die Grenzwertkommission hat vorgeschlagen, erst ab einer Blutserumkonzentration an THC von 3,0 ng/ml regelmäßig davon auszugehen, dass Konsum und Fahren nicht ausreichend getrennt wurden, was die Nichteignung zum Führen von Kraftfahrzeugen bedingt. Bei THC-Konzentrationen zwischen 1,0 und 3,0 ng/ml sollte die Fahreignung durch eine medizinisch-psychologische Untersuchung überprüft werden.
Over 3,814 young drivers died in European Countries in 2004. Based on the recent OECD study: "Young drivers: the road to safety" (OECD, 2006), this paper addresses the question of the factors contributing to this high risk, and it draws together the experiences of many countries in reducing this risk. The comparisons across countries show that young driver safety is related to the quality of the traffic system. Safe countries have also safe young drivers, demonstrating that raising general safety levels is beneficial for young novice drivers. The analysis of the developments over time reveals that young males in contrast to young females have not benefited enough from the latest safety measures, indicating the need for a better understanding of the nature of the young male driver accident proneness. Although, recent studies on brain development indicate that youngsters may not be sufficiently physiologically matured to handle complex and dangerous tasks such as car driving, crash patterns indicate that enhanced driving experience may have protective effects. The paper closes with a 9 point policy plan. The full OECD report (258 pages) can be downloaded for free from http://internationaltransportforum.org/Pub/pdf/06YoungDrivers.pdf.
Im Rahmen des 12-monatigen Forschungsprogramms "Intelligente Straßenverkehrsinfrastruktur durch 3D-Modelle und RFID-Tags", aufgesetzt von der Bundesanstalt für Straßenwesen, entwickelte die HOCHTIEF Solutions AG ein Konzept für ein Infrastruktur-Informationssystem. Ziel dieses Forschungsvorhabens war es, das bestehende System der öffentlichen Anstalt für den Betrieb und Erhalt von Brückenbauwerken, sowie die dazugehörigen Workflows mithilfe neuer Technologien zu optimieren. Das entwickelte Konzept für ein Infrastrukturinformationssystem ISIS, kurz für Intelligente StraßenverkehrsInfraStruktur, wurde als eine Schale um die bereits vorhandene Straßeninformationsbank-Bauwerke (SIB-BW) herum konzipiert. Alle Prozesse und Datenflüsse, die rund um diese Datenbank bestehen, bleiben damit unverändert. Zusätzliche Informationen und Dokumente, die an die vorhandenen Datensätze angefügt werden sollen, werden in dem neuen System abgelegt und mit dem Bestandsdatensatz verknüpft. Ziele: - Informationsbereitstellung optimieren, - 3D unterstützte Dokumentation des Bauwerksprüfprozesses, - Anlehnung an bestehende Prozesse, - Einbindung mobiler Endgeräte und Zustandssensoren. ISIS gründet sich auf folgende Komponenten: - Bauwerksmodelle: -- 2D-Platzhalter für Bestandsbauten, -- 3D-Modelle für Neubauten, - mobile Schadensaufnahme via mobiler Endgeräte, - Frühwarnsysteme auf Basis von RFID-Technologie (Feuchtigkeit und Korrosion), - 3D-Pins für die Markierung relevanter Punkte (RFID-Detektoren, Schäden, etc.), - Hardware mit hoher Verfügbarkeit und Akzeptanz (iPads). Um allen Beteiligten den Zugriff zu dem Informationssystem zu ermöglichen, wird das System zur Ausführung auf einer Online-Plattform konzipiert. Alle relevanten Informationen eines Straßenverkehrsinfrastrukturprojektes können in konsolidierter Form bereitgestellt werden. Die bisher dezentrale und inkompatible Datenhaltung in mehreren Teilsystemen wird unterbunden und eine einfache und durchgängige Nutzung des Datenbestandes in Planung, Bau und Betrieb wird ermöglicht. Um den Prozess der Bauwerksprüfung effizienter zu gestalten, sollen Informationen zum Bauwerkszustand mithilfe der 3D-Pin-Markierung und dem Einsatz von Radiofrequenz-Technologie (RFID) regelmäßig überprüft werden, um Bauwerksschäden frühzeitig erkennen zu können.
Aim of the study was to evaluate the protective effect of bicycle helmets particularly considering injuries to the head and to the face. Accidents with the participation of bicyclists which occurred from 2000 to 2007 were chosen from GIDAS. We observed that injuries to the head and face were more severe in the group of non-helmeted riders. There seems to be no significant difference in injuries with AIS 3-6. Altogether 26 cyclists were killed. 2 of them wore a helmet (1% of helmeted cyclists), 24 did not (1% of non-helmeted cyclists). Only one killed rider (without helmet) did not suffer from polytrauma (only head injuries recorded). The findings seem to support the thesis of a preventive effect of the bicycle helmet, however the two groups are different in their characteristics related to riding speed. Necessarily we need a multivariate model to evaluate the effect of helmets.
Ziel der vorliegenden Arbeit war die Untersuchung des Alterungsverhaltens von Schutzhelmen für Kraftfahrer und der Einflüsse der photochemischen Alterung der Außenseite der Helmschale auf die Schutzwirkung des Helms. Für die künstliche Bewitterung wurde ein neues Gerät mit speziellen UV-Leuchtstofflampen nach DIN 53384, Verfahren B aufgebaut, in dem neun komplette Schutzhelme gleichzeitig bestrahlt und beregnet werden können. Für die Untersuchungen wurden Schutzhelme nach der ECE-Regelung 22 mit Helmaußenschalen aus den Kunststoffen PC, PA und UP-GF bewittert, wobei eine maximale natürliche Beanspruchung in vier Jahren Gebrauch simuliert wurde. Nach der künstlichen Bewitterung wurden die Schutzhelme einer Stoßdämpfungsprüfung nach Abschnitt 7.3 der ECE-Regelung 22 unterzogen. Bei den nach ECE-Regelung 22 typgeprüften Schutzhelmen konnte keine Alterung ermittelt werden, die die Schutzwirkung der Helme beeinträchtigt hat. Vergleichsversuche mit älteren Helmen mit Helmschalen aus ABS dagegen haben nach der gleichen künstlichen Bewitterung einen deutlichen Einfluss der Alterung gezeigt.
This paper will outline ETSC's contribution to the European Union's road safety policy 2011-2020. It will present some of the main recommendations from ETSC's Blueprint for the 4th Road Safety Action Programme and will introduce the response to the European Commission's Road Safety Policy Orientations 2011-2020 (published July 2010). The second framework document presented is the Transport White Paper (published March 2011). The paper will focus on new targets and the new vision set for Europe's Road Safety policy picking out some issues in particular such as traffic law enforcement and the protection of vulnerable road users. It will argue that by reinforcing the current Road Safety Policy Orientations, the EU will be better placed to reach its new ambitious goal of halving road deaths by 2020 and the longer term zero casualty vision.
In recent years the boundaries between active and passive safety blurred more and more. Passive safety in the traditional term includes all safety aspects to prevent occupants to be injured or at least injury severity should be reduced. Passive Safety starts with the collision (first vehicle contact) and ends with rescue (open vehicle doors). Within this phase the occupant has to be protected by the passenger compartment whereby no intrusion should occur. Active safety on the other side was developed to interact prior to the collision whereby the goal is to prevent accidents. The extensive interaction between active and passive safety led to the terminologies "Primary" and "Secondary" safety whereas the expression Integrated Safety Concept was generated. Within this study the most well documented single vehicle accidents with cars not equipped with ESP were identified from the PENDANT database and reconstructed. Additional cases were found in the database ZEDATU of TU Graz. In comparison each case was simulated with the assumption that the cars were equipped with ESP. The differences regarding accident avoidance or crash severity as well as reduction of injury risk were analysed.
Due to recent years accident avoidance and crashworthiness on Austrian roads were mostly developed on national statistics and on-scene investigation respectively. Identification and elimination of black spots were main targets. In fact many fatal accidents do not occur on such black spots and black-spot investigation has reached a limit. New methods are required and therefore the Austrian Road Safety Programme was introduced by the Austrian Ministry of Transport, Innovation and Technology. The primary objective is the reduction of fatalities and severe injuries. Graz University of Technology initiated the project ZEDATU (Zentrale Datenbank tödlicher Unfälle) with the goal to identify similarities in different accident configurations. A matrix was established which categorizes risk and key factors of participating parties. Based on this information countermeasures were worked out.
Looking at the total of sum of fatal car accidents the number of single-vehicle accidents and particularly run-offroad (ROR) accidents are most frequent. In Austria on the Autobahn ROR accidents amounts to almost 45% of all fatal accidents, i.e. nearly every second fatal accident is caused by ROR accidents and interaction with infrastructure. Approximately 43 people were killed on Autobahns in ROR accidents with passenger cars. One possibility of protection against impacts with infrastructure is the use of guardrails. However, the initial element identified as a turned down terminal could become a dangerous impact object. These turned down terminals may lead a vehicle to roll over or the car "takes-off" when impacting the turned down guardrail. In many cases it is reported that the vehicle is jumping into road side objects such as traffic sign poles or overpasses. On average, nine people are killed in such accidents every year in Austria.
Measuring and characterizing airborne particulate matter (PM) is an important research area because PM can lead to impacts on health and to visibility reduction, material damage and groundwater pollution. In regard to road dust, suspension and re-suspension and the contribution of non-exhaust PM to total traffic emissions are expected to increase as a result of predicted climate scenarios. European environmental regulations have been enforced to reduce exhaust particle emissions from road traffic, but little attention has been paid to reducing non-exhaust coarse particle emissions due to traffic. Therefore, a monitoring program for coarse PM has been initiated in early 2013 to assess the predicted increase in the abundance of non-exhaust particles. Particle sampling was performed with the passive-sampler technique Sigma-2. The subsequent single-particle analysis allows for characterization of individual particles, determination of PM size distribution, and calculation of PM mass concentrations. Two motorways n ear Cologne (Koeln), Germany were selected as sampling sites, and the experimental setup in the field was realized with a so-called twin-site method. The present study reports single-particle analysis data for samples collected between May 31, 2013 and May 30, 2014. Coarse PM, generated through multi-source mechanisms, consists of, e.g., tire-wear, soot aggregates, and mineral dust. The highest mass concentration occurs at both motorways in spring, and the observed PM mainly contains traffic-abrasion particles. The field measurements show that the minimum PM concentration was found in the 5 to 12-°C temperature range, whereas the maximum concentration was observed in both the "5 to 5-°C and the 12 to 24-°C ranges, in agreement with previous laboratory measurements. Correlation between super-coarse (d p 10"80 μm, geometric equivalent diameter) PM concentration and precipitation displays a significant increase in concentration with decreasing number of precipitation events (dry weather periods).
The Decision Support System (DSS) is one of the key objectives of the European co-funded research project SafetyCube in order to better support evidence-based policy making. Results will be assembled in the form of a DSS that will present for each suggested road safety measure: details of risk factor tackled, measure, best estimate of casualty reduction effectiveness, cost-benefit evaluation and analytic background. The development of the DSS presents a great potential to further support decision making at local, regional, national and international level, aiming to fill in the current gap of comparable measures effectiveness evaluation. In order to provide policy-makers and industry with comprehensive and well-structured information about measures, it is essential that a systems approach is used to ensure the links between risk factors and all relevant safety measures are made fully visible. The DSS is intended to become a major source of information for industry, policy-makers and the wider road safety community.