Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (31)
- Buch (Monographie) (28)
- Bericht (1)
- Arbeitspapier (1)
Volltext vorhanden
- ja (61) (entfernen)
Schlagworte
- Vehicle (61) (entfernen)
Institut
- Sonstige (61)
- Abteilung Fahrzeugtechnik (1)
Die hier vorgestellten Forschungsprojekte hatten die Aufgabenstellung, - sinnvolle Obergrenzen für den biogenen Blend-Anteil im Kraftstoff aus ökonomisch-technischer Sicht aufzuzeigen sowie - technische Anforderungen an Pkw aus Altbestand und Neufahrzeugen für den Betrieb mit solchen Kraftstoff-Blends zu untersuchen, insbesondere in Hinblick auf Aspekte der Dauerhaltbarkeit. Auf Basis einer umfangreichen Literaturrecherche wurden zunächst sinnvolle Beimischungen ermittelt, die in 5 Fahrzeugen (3 Otto-Pkw, 2 Diesel-Pkw) auf einem Abgasrollenprüfstand getestet wurden. Anschließend wurden zwei Fahrzeuge einer Dauerlaufuntersuchung (ca. 80.000 km) unterzogen. Hierbei wurden u. a. Emissionsverhalten, Kraftstoffverbrauch und Motorleistung bewertet und Motorölproben entnommen. Am Ende der Dauerlaufuntersuchungen wurden bei beiden Fahrzeugen Motor und Kraftstoffsystem sorgfältig inspiziert. Aus fahrzeugtechnischer Sicht begrenzen bei Biodiesel vor allem die Ölverdünnung sowie der Anstieg der NOx-Emissionen den maximal möglichen Beimischungsanteil. Bei Bio-Alkohol sind insbesondere die Materialverträglichkeit und der Kraftstoffverbrauch limitierende Faktoren für erhöhte Beimischungen. Obwohl die betrachteten Euro-5-Fahrzeuge nicht für den Betrieb mit erhöhten Beimengungen an Biokraftstoffen ausgelegt waren, wurden die maßgeblichen Grenzwerte für die limitierten Emissionen im Verlauf der Untersuchungen nicht überschritten. Mit Ausnahme von NOx bei den Dieselfahrzeugen wurden darüber hinaus sogar die Euro-6-Grenzwerte unterschritten.
Aktive Systeme der passiven Fahrzeugsicherheit zum Fußgängerschutz, sogenannte crash-aktive Fußgängerschutzsysteme, werden seit 2005 zur Erfüllung der gesetzlichen Anforderungen (siehe Verordnung (EG) Nr. 78/2009 und 631/2009) in Serienfahrzeugen eingesetzt. Diese crash-aktiven Fußgängerschutzsysteme stellen im Gegensatz zu den rein passiven Systemen nur eine instationäre Lösung dar. Da die innerhalb der gesetzlichen Anforderungen definierten Testverfahren zur Bewertung stationärer Systeme entwickelt wurden, können derzeit mögliche Risiken instationärer Systeme nicht berücksichtigt werden. Im Rahmen dieses Forschungsprojektes soll ein Bewertungsverfahren für diese crash-aktiven Fußgängerschutzsysteme entwickelt werden, welches das reale Potential dieser Systeme möglichst gut wiedergibt. Basis hierfür soll eine umfangreiche Untersuchung zusätzlicher Risiken bilden. Die hier untersuchten instationären Schutzmaßnahmen werden nur im Falle eines Fahrzeuganpralls gegen Fußgänger aktiviert, der daher zuverlässig erkannt werden muss. Für die hierfür eingesetzten, kontaktbasierten Sensorsysteme stellen Fußgänger mit geringen Lasteinträgen in die Fahrzeugfront eine große Herausforderung dar. Die Lasteinträge hängen von zahlreichen Faktoren, wie bspw. der Höhe der entsprechenden Krafteinleitungspfade sowie der Größe und dem Gewichts des Fußgängers, ab. Mit Hilfe von umfangreichen Anprallversuchen und -simulationen wird gezeigt, dass die bisher eingesetzten Prüfkörper nur zum Teil für die Erfüllung dieser Anforderungen geeignet sind. Für ein geeignetes Prüfverfahren müssen daher neue Prüfkörper entwickelt werden. Durch die Aktivierung der Schutzmaßnahme soll bei den crash-aktiven Systemen vor allem das Verletzungsrisiko beim Kopfanprall verringert werden. Hierfür wird häufig die hintere Motorhaubenkante angehoben, um zusätzlichen Deformationsfreiraum zur Verfügung zu stellen. Die Haubenanhebung kann jedoch auch in zusätzlichen Verletzungsrisiken resultieren, bspw. durch die exponierte hintere Haubenkante oder die Verringerung des Deformationsfreiraums in Folge des Oberkörperanpralls. Ein Ersatzprüfverfahren zur Bewertung der Haubendeformation mit Hilfe des Hüftimpaktors wird vorgestellt. Ein hybrides Testverfahren bestehend aus Simulation und Versuch eignet sich für eine objektive Bewertung dieser Systeme, wobei die entsprechenden Versuchsparameter mit Hilfe der vorherigen Simulation bestimmt werden können.
Haftung bei kooperativen Verkehrs- und Fahrerassistenzsystemen : Forschungsprojekt FE 89.0251/2010
(2012)
Die Untersuchung zum Forschungsprojekt FE 89.0251/2010 "Haftung bei kooperativen Verkehrs- und Fahrerassistenzsystemen" beschäftigt sich mit der rechtlichen Analyse verschiedener haftungsrechtlich relevanter Szenarien im Straßenverkehr, bei denen Verkehrs- und Fahrerassistenzsysteme bereits eingebunden sind, oder aber eine Einbindung in naher Zukunft zu erwarten ist. Berücksichtigt sind nur Informations- und Warnsysteme. Als relevante Szenarien werden die lokale Gefahrenwarnung und die optimale Verkehrsflusssteuerung für Lichtsignalanlagen identifiziert. Bei der lokalen Gefahrenwarnung ist zu unterschieden, ob sicherheitsrelevante Informationen von den beteiligten Verkehrs- bzw. Fahrerassistenzsystemen nur weitergeleitet oder auch bearbeitet und ausgewertet werden. Die untersuchten Fälle berücksichtigen verschiedene Fehlerquellen und unterscheiden danach, ob die involvierte Infrastruktur von öffentlicher Hand oder von einem privaten Unternehmen betrieben wird. Ergebnisse des Forschungsprojektes sind: a) Haftungsrechtliche Anspruchsgrundlagen ergeben sich aus dem allgemeinen Deliktsrecht (-§ 823 BGB), der Produkt- und Produzentenhaftung (ProdHaftG bzw. -§ 823 BGB), dem Straßenverkehrsrecht (-§-§ 7, 18 StVG), sowie der Amtshaftung (-§ 839 BGB i.V.m. Art. 34 GG). b) Informatorische oder warnende kooperative Verkehrs- und Fahrerassistenzsysteme dienen alleine einer zusätzlichen Unterstützung des Fahrers und können diesen nicht von der Pflicht befreien, die im Verkehr gebotene Sorgfalt zu beachten. c) Die Hersteller von kooperativen Verkehrs- und Fahrerassistenzsystemen müssen wie bei jedem anderen Produkt auch die berechtigten Sicherheitserwartungen der Käufer erfüllen. d) Die öffentliche Hand kommt durch das Betreiben der genannten Systeme ihrer Straßenverkehrssicherungspflicht nach. Nur wenn sie diese nicht mit der nötigen Sorgfalt erfüllt, kommt eine Haftung in Betracht. e) Durch die Verwendung von informatorischen oder warnenden kooperativen Verkehrs- und Fahrerassistenzsystemen ist keine grundsätzliche Haftungsverschiebung festzustellen. Weitere Empfehlungen: Informatorische oder warnende kooperative Verkehrs- und Fahrerassistenzsysteme können ohne zusätzliches systemspezifisches Haftungsrisiko in den Straßenverkehr eingeführt werden.
Teil 1, Informations- und Kommunikationstechniken zur Optimierung des Betriebsdienst-Managements: In vielen Arbeits- und Organisationsprozessen des Straßenbetriebsdienstes werden Informations- und Kommunikationstechnologien (IuK-Technologien) eingesetzt, um Arbeitsabläufe einfacher, besser und sicherer zu gestalten sowie umfassende Daten für die Abrechnung und weitere Planung bereit zu stellen. Die Potenziale der IuK-Technologien werden im Straßenbetriebsdienst häufig nur unvollständig genutzt. Ziel des FE-Vorhabens war die systematische Aufbereitung von Anforderungen und Möglichkeiten der IuK-Technologien. Die Anforderungen des Straßenbetriebsdienstes an den Einsatz der IuK-Technologien berücksichtigen neben der derzeitigen Praxis auch künftige Entwicklungen, die sich beispielsweise aus der Einführung der wirtschaftlichkeitsorientierten Steuerung des Betriebsdienstes ergeben. Damit IuK-Technologien erfolgreich betrieben werden können, ist neben Funktionalität und Qualität der technischen Komponenten auch die Berücksichtigung der organisatorischen und betrieblichen Abläufe im Straßenbetriebsdienst von großer Bedeutung. In den Untersuchungen zur mobilen Sprach- und Datenkommunikation wurde deutlich, dass bei Auslaufen des Analogfunks neben dem Aufbau eigenständiger Digitalfunknetze auch die Nutzung des kommerziellen Mobilfunks in Betracht gezogen werden sollte. Wesentliche Grundlagen für die wirtschaftliche Steuerung sind die automatisierte Einsatzdatenerfassung sowie ein umfassendes Bestandsdatenmanagement, wobei Bestandsobjekte auch mit Hilfe von RFID-Chips identifiziert werden können. Im Winterdienst sollten verstärkt berührungslose Sensoren für die Erfassung von Fahrbahntemperatur und "zustand zum Einsatz kommen. Salzmanagementsysteme ermöglichen u.a. die Überwachung von Streustoffvorräten an nicht besetzten Standorten sowie eine übergeordnete Logistik bei Lieferengpässen. Wichtig sind auch Systeme zur Unterstützung der Fahrer von Winterdienstfahrzeugen, durch die Einsätze anforderungsgerechter und flexibler erfolgen können. Es wurden auch innovative IuK-Technologien analysiert, die große Potentiale für den Straßenbetriebsdienst erkennen lassen. Hierzu zählen die mobile Erfassung des Straßenzustandes für den Winterdienst durch Einsatzfahrzeuge oder Fahrzeuge des Individualverkehrs, alternative Kommunikationswege für die Warnung der Verkehrsteilnehmer vor Arbeitsstellen im Verkehrsraum sowie das autonome Fahren von Absperr- und Vorwarnanhängern, durch das die Gefährdung des Personals im Verkehrsraum deutlich reduziert werden kann. Es besteht jedoch noch erheblicher Forschungs- und Entwicklungsbedarf, um diese Technologien effizient im Straßenbetriebsdienst einzusetzen sowie ihren Nutzen umfassend bewerten zu können. Teil 2, Autonomes Fahren für den Straßenbetriebsdienst: Mitarbeiter des Betriebsdienstes sind in Arbeitsstellen auf Autobahnen enormen Unfallgefahren ausgesetzt. Weiterhin erfordert die Sicherung von Arbeitsstellen kürzerer Dauer (AkD) einen hohen personellen und zeitlichen Aufwand. Das FE-Projekt "Informations- und Kommunikationstechniken zur Optimierung des Betriebsdienst-Managements" zeigte, dass die Anwendung autonomer Fahrzeuge im Betriebsdienst die Gefährdung des Personals im Verkehrsraum reduzieren kann. In Ergänzung dazu wurde der Entwicklungsansatz "Autonomes Fahren für den Straßenbetriebsdienst" konkretisiert. Eine untersuchte Minimallösung beinhaltet ein autonom fahrendes Absperrfahrzeug, welches einem Führungsfahrzeug auf der Autobahn folgt. In einem zweiten Gesamtkonzept ist die Automatisierung einer gesamten Absicherungskolonne mit Absperr- und Vorwarnfahrzeugen incl. der unbemannten Anfahrt zur Autobahn auf nicht öffentlichen Straßen vorgesehen. In der technischen Umsetzung handelt es sich bei den Einsatzszenarien der unbemannten Fahrzeuge um Formationsfahrten oder Folgefahrt-Szenarien auf der Autobahn. Unbemannte Fahrzeuge mit den dargestellten Funktionsweisen können deutliche Sicherheitssteigerungen für Betriebsdienstmitarbeiter bieten. Eine erste Abschätzung ergab, dass rund 70 % der Mitarbeiter, welche in AkD auf Autobahnen beim Aufenthalt in Fahrzeugen verunglücken, durch den Einsatz unbemannter Arbeitsstellensicherung geschützt werden können. Dies entspricht rund der Hälfte der insgesamt bei Unfällen in AkD verunglückten Mitarbeiter. Für die Realisierung unbemannter Sicherungsfahrzeuge sind viele technische Fragestellungen zu klären, insbesondere bezüglich der Prognose und Detektion von Fehlfunktionen. Für den Einsatz der vorgeschlagenen Systeme ist eine allgemeine Genehmigung für den täglichen Betrieb notwendig. Hierzu sind zahlreiche rechtliche Fragestellungen zu beantworten. Somit kann die Implementierung unbemannter Sicherungsfahrzeuge im Betriebsdienst als Pilotprojekt für unbemanntes Fahren im Allgemeinen bzw. in anderen Branchen dienen.
Since 2008, the authors inspected fatal traffic accidents on the spot every year, with the cooperation of Toyota police station in Aichi pref. In the jurisdiction, numbers of fatal accidents were 18 in 2008, 12 in 2009, 14 accidents in 2010, and 16 in 2011. We here report the results of our analysis of information obtained by detailed inspection for those that occurred from 2008 to 2010. We focused on vehicle-to-pedestrian accidents, which accounted for about 45% of all accidents in 2008. Because many accidents occurred on residential roads not far from pedestrians" homes, it was revealed that the decrease of the collision speed by traffic calming such as humps and zone speed management, was highly effective. On the other hand, pedestrian detection technologies seemed to be also effective as a countermeasure on vehicle side. Every pedestrian position against a vehicle was clarified and TTC (Time to Collision) was calculated provisionally. Pedestrian accidents in intersections were also examined. Among the intersection pedestrian accidents within the jurisdiction, compared with the national average in Japan, the ratio of intersections without a signal and the ratio without a pedestrian crossing were high. According to the comparison of the Japanese traffic accident patterns between 2001 and 2008, pedestrian accidents during turning right and turning left did not decrease much. For elderly drivers, these accidents occurred very often. Finally, single vehicle accidents were analysed with the accident pattern analysis methods used above. There were high numbers of single vehicle accidents against object on single roads. Although fatal accidents against guardrails decreased, the numbers of fatal accidents against a utility pole and a sign pole were nearly constant. As for the impact with narrow width objects such as utility poles, the fatality rate was very high, and countermeasures of both road infrastructure and vehicles seem to be effective.
Although the number of road accident casualties in Europe (EU27) is falling the problem still remains substantial. In 2011 there were still over 30,000 road accident fatalities. Approximately half of these were car occupants and about 60 percent of these occurred in frontal impacts. The next stage to improve a car's safety performance in frontal impacts is to improve its compatibility. The objective of the FIMCAR FP7 EU-project was to develop an assessment approach suitable for regulatory application to control a car's frontal impact and compatibility crash performance and perform an associated cost benefit analysis for its implementation. This paper reports the cost benefit analyses performed to estimate the effect of the following potential changes to the frontal impact regulation: • Option 1 " No change and allow current measures to propagate throughout the vehicle fleet. • Option 2 " Add a full width test to the current offset Deformable Barrier (ODB) test. • Option 3 " Add a full width test and replace the current ODB test with a Progressive Deformable Barrier (PDB) test. For the analyses national data were used from Great Britain (STATS 19) and from Germany (German Federal Statistical Office). In addition in-depth real word crash data were used from CCIS (Great Britain) and GIDAS (Germany). To estimate the benefit a generalised linear model, an injury reduction model and a matched pairs modelling approach were applied. The benefits were estimated to be: for Option 1 "No change" about 2.0%; for Option 2 "FW test" ranging from 5 to 12% and for Option 3 "FW and PDB tests" 9 to 14% of car occupant killed and seriously injured casualties.
The objective of the study is to measure the risk of pedestrian and bicyclist in urban traffic through an analysis of real-world accident data. The kinematics and injury mechanisms for both pedestrian and bicyclists are investigated to find the correlation of injury risks with injury related parameters. For this purpose, firstly 338 cases are selected as a sample from an IVAC accident database based on the In-depth Investigation of Vehicle Accident in Changsha of China. A statistic measurement of the fatality and serious injury risks with respect to impact speed was carried out by logistic regression analysis. Secondly, 12 pedestrian and 12 bicyclist accidents were further selected for reconstruction with MADYMO program. A comparative analysis was conducted based on the results from accident analysis and computer reconstructions for the injury risk, head impact conditions and dynamic response of pedestrians and bicyclists. The results indicate that bicyclists suffered lower risks of severe injuries and fatalities compared with pedestrians. The risks of AIS 3+ injury and fatality are 50% for pedestrians at impact speeds of 53.2 km/h and 63.3 km/h, respectively, while that for bicyclists at 62.5 km/h and 71.1 km/h, respectively. The findings could have a contribution to get a better understanding of pedestrians" and bicyclists" exposures in urban traffic in China, and provide background knowledge to generate strategies for pedestrian protection.
This work aims at bringing evidence for mass incompatibility in frontal impact for cars built according to the UNECE R94 regulation. French national injury accidents database census for years 2005 to 2008 were used for the analysis. The heterogeneity of frontal self-protection among cars of different masses is investigated, as well as the partner protection parameter offered by these cars. The last part of the analysis deals with the estimation of the benefit, in terms of fatal and severe injuries avoided, if crashworthiness was harmonized for the whole fleet of vehicle. This calculation is done for France and is extended to all Europe.
Elektronik und IT werden auch im Automobilbereich zunehmend Gegenstand unautorisierter Veränderungen. Diese Studie stellt einen ersten, breiteren Überblick über die praktische Relevanz elektronischer Veränderungen an Fahrzeug- und Infrastruktursystemen dar. Es liefert einen Überblick über wesentliche bekannte und existente Beispiele von Möglichkeiten derartiger Veränderungen, das Risiko ihres Auftretens und damit verbundene Gefahren. Die Ergebnisse basieren auf einer Recherche, die neben wissenschaftlichen Quellen insbesondere das Internet als neues, interaktives Medium einbezieht. Es werden Abschätzungen zur praktischen Relevanz dieser Veränderungen vorgenommen und potentielle Folgen insbesondere für die Verkehrssicherheit reflektiert. Praktische Hinweise auf elektronische Veränderungen sind an 24 Fahrzeug- und Infrastruktursystemen dokumentiert, die als Ziel teils mehrerer Arten von elektronischen Veränderungen identifiziert wurden. Dies erstreckt sich über verschiedene Domänen wie u.a. den Antriebstrang, das Fahrwerk, Infotainment, Fahrerassistenz und mehrere Infrastrukturkomponenten. Diese Systematisierung enthält zudem eine Klassifikation der agierenden Personen, wobei deren individuelle Motivationen, technische Kenntnisse und Ausstattung unterschieden werden. Das Spektrum potentiell resultierender Gefahren wird einerseits theoretisch anhand der erstellten Systematisierungen aufgezeigt und andererseits an 19 Rechercheergebnissen aus verschiedenen Bereichen illustriert. Die so vorgenommene Analyse des Gefährdungspotentials wird ergänzt durch einen Ausblick auf potentielle zukünftige Gefährdungen, die sich insbesondere in kommenden Car-to-Car Kommunikationsnetzen ergeben könnten und die weitere Erforschung von Schutzkonzepten motivieren. Während die recherchierten Veränderungen heute noch meist vom Nutzer ausgehen und das Gefährdungspotential häufig unbeabsichtigt entsteht, könnte zukünftig das vorsätzliche Herbeiführen von Gefährdungen an Bedeutung gewinnen.
Looking at the total of sum of fatal car accidents the number of single-vehicle accidents and particularly run-offroad (ROR) accidents are most frequent. In Austria on the Autobahn ROR accidents amounts to almost 45% of all fatal accidents, i.e. nearly every second fatal accident is caused by ROR accidents and interaction with infrastructure. Approximately 43 people were killed on Autobahns in ROR accidents with passenger cars. One possibility of protection against impacts with infrastructure is the use of guardrails. However, the initial element identified as a turned down terminal could become a dangerous impact object. These turned down terminals may lead a vehicle to roll over or the car "takes-off" when impacting the turned down guardrail. In many cases it is reported that the vehicle is jumping into road side objects such as traffic sign poles or overpasses. On average, nine people are killed in such accidents every year in Austria.
Accident data shows that the vast majority of pedestrian accidents involve a passenger car. A refined method for estimating the potential effectiveness of a technology designed to support the car driver in mitigating or avoiding pedestrian accidents is presented. The basis of the benefit prediction method consists of accident scenario information for pedestrian-passenger car accidents from GIDAS, including vehicle and pedestrian velocities. These real world pedestrian accidents were first reconstructed and the system effectiveness was determined by comparing injury outcome with and without the functionality enabled for each accident. The predictions from Volvo Cars" general Benefit Estimation Model are refined by including the actual system algorithm and sensing models for a relevant car in the simulation environment. The feasibility of the method is proven by a case study on a authentic technology; the Auto Brake functionality in Collision Warning with Full Auto Brake and Pedestrian Detection (CWAB-PD). Assuming the system is adopted by all vehicles, the Case Study indicates a 24% reduction in pedestrian fatalities for crashes where the pedestrians were struck by the front of a passenger car.
In a first step, we have examined approximately 23 000 single vehicle accidents within the Austrian National Statistics database. In a second step, we considered 15% of all fatal "running off the road" accidents that occurred in Austria in 2003. As a result, two accident categories were specified; "leaving the road without preceding manoeuvre" and "leaving the road with preceding manoeuvre". These two categories can be basically characterised by the vehicle- heading angle and its velocity angle. In this report, we further suggest theoretical approaches for the dimensioning of a safety zone, an area adjacent to the road free of fixed objects or dangerous slopes. We also show the link between the two accident categories mentioned above and the real world accidents analysed in detail. These observations also form the basis for the required length for safety devices. Finally, we summarise accident avoidance strategies.
Empirical vehicle crashworthiness studies are usually based on national or in-depth traffic accident surveys: Data on accident-involved cars/drivers are analysed in order to quantify the chance of driver injury and to assess certain risk factors like car make and model. As the cars/drivers involved in the same accident form a "cluster", where the size of the cluster equals the number of accident-involved parties, traffic accident survey data are typical multi-level data with accidents as first-level or primary and cars/drivers as secondlevel or secondary units (car occupants in general are to be considered as third level units). Consequently, appropriate statistical multi-level models are to be used for driver injury risk estimation purposes as these models properly account for the cluster structure of traffic accident survey data. In recent years various types of regression models for clustered data have been developed in the statistical sciences. This paper presents multi-level statistical models, which are generally applicable for vehicle crashworthiness assessment in the sense that data on single and multiple car crashes can be analysed simultaneously. As a special case of multi-level modelling driver injury risk estimation based on paired-by-collision car/driver data is considered. It is demonstrated that assessment results may be seriously biased, if the cluster structure inherent in traffic accident survey data is erroneously ignored in the data analysis stage.
Electronic Stability Program (ESP) aims to prevent the lateral instability of a vehicle. Linked to the braking and powertrain systems, it prevents the car from running wide on a corner or the rear from sliding out. It also helps the driver control his trajectory, without replacing him, in the case of loss of control where the driver is performing an emergency manoeuvrer (confused and exaggerated steering wheel actions). A new ESP function optimizes ESP action in curves with hard under steering (situations in which the front wheels lose grip and the vehicle slides towards the outside of the curve). A complementary feature prevents the wheels from spinning when pulling away and accelerating. The name given to the ESP system varies according to the vehicle manufacturer, but other terms include: active stability control (ASC), automotive stability management system (ASMS), dynamic stability control (DSC), vehicle dynamic control (VDC), vehicle stability control (VSC) or electronic stability Control (ESC). This paper proposes an evaluation of the effectiveness of ESP in terms of reduction of injur accidents in France. The method consists of 3 steps: - The identification, in the French National injury accident census (Gendarmerie Nationale only), of accident-involved cars for which the determination of whether or not the car was fitted with ESP is possible. A sample of 1 356 cars involved in injury accidents occurred in 2000, 2001, 2002 and 2003 was then selected. But we had to restrict the analysis to only 588 Renault Lagunas. - The identification of accident situations for which we can determine whether or not ESP is pertinent (for example ESP is pertinent for loss of control accidents whilst it is not for cars pulling out of a junction). - The calculation, via a logistic regression, of the relative risk of being involved in an ESPpertinent accident for ESP equipped cars versus unequipped cars, divided by the relative risk of being involved in a non ESP-pertinent accident for ESP equipped cars versus unequipped cars. This relative risk is assumed to be the best estimator of ESP effectiveness. The arguments for such a method, effectiveness indicator and implicit hypothesis are presented and discussed in the paper. Based on a few assumptions, ESP is proved to be highly effective. Currently, the relative risk of being involved in an ESP pertinent accident for ESP-equipped cars is lower (-44%, although not statistically significant)rnthan for other cars.rn
Rollover scenarios in Europe
(2005)
Rollover accidents seem to be a rising problem in Europe and therefore the systematic of this accident scenario should be investigated. Based on statistical investigations on major European accident databases for different countries a series of 73 real world rollover accidents was analysed. These cases were reconstructed using PC-Crash and preliminary categorised using a modified USbased rollover classification. In a first step, the rollover events were reconstructed from the point of conflict to the vehicle- rest position. The vehicles kinematics as well as its linear and rotational velocities were derived. In a second step typical velocity characteristics as well as kinematics were identified and the events categorised according to these criteria. Based on these results four main categories were defined, covering all reconstructed accidents. This categorisation was based on mechanical parameters (rotatory and translator kinematical data of the vehicle). Significant differences can be seen for different scenarios for the "first phase of rollover".
This paper describes the methodology of In-Depth Investigation in Germany on the example of GIDAS (German In-Depth Accident Study). Since 1999 in Germany a joint project between FAT (Forschungsvereinigung Automobiltechnik or Automotive Industry Research Association) and BASt (Bundesanstalt für Straßenwesen or the Federal Road Research Institute) is being carried out in Hannover and Dresden. The methodology of this project is based on a statistically orientated procedure of data sampling (sampling plan, weighting factors). The paper describes the possibilities of such in-depth investigation on the results of the offered title. The accident cases were collected randomly within GIDAS at Hannover. There are more cases existing from previous investigation started in 1985 under the same methodology. The portion of rollovers can be established at 3.7% of all accidents with casualties in the year 2000. For the study 434 cases of car accidents with rollovers are used for a detail comprehensive analysis. The accidents happened in the years 1994 to 2000 in the Hannover area. The injury distribution will report about 741 occupants with rollover accident event. The presented paper will give an overview of the accident situations following in rollover movements of cars. The distributions of injury frequencies, injury severity AIS for the whole body and for the body regions of occupants will be presented and compared to technical details like the impact speed and the deformation pattern. The speed of the car was determined at the point of rollover and on the point of accident initiency. The characteristics of the kinematics followed in a rollover movement are analyzed and the major defined types of rollover will be shown in the paper. The paper will describe the possibilities of In-Depth Investigation methods for the approach of finding countermeasures on the example of car accidents with rollover and explaining the biomechanics of injuries in rollover movements.
This paper set out to examine the possibilities for injury avoidance implications for older drivers in crashes, based on crash and injury patterns among older drivers and current trends in ageing in most western societies. A number of safety technologies were identified and discussed which have potential for improving vehicle older driver crash avoidance and crashworthiness. While there were some promising estimates available of the likely benefits of this technology for improving safety, it is evident that they need to be confirmed for older drivers, given their age-related disabilities and sensory limitations. Further research is urgently required to ensure that these technologies yield safety benefits without any disbenefits for older drivers.rn
This report gives an overview of pedestrian accidents on Japanese roads. Database used for the analysis is national traffic accident data based on police reports. Relevant measures and background information ranging from vehicle safety, engineering and education are briefly reviewed, and area for further improvement is discussed.rn
In order to improve the protection of children transported in cars, within the CHILD programme (GR3D-CT2002-00791) real world road accidents are thoroughly analysed and then reconstructed in laboratory. Prior to comparing injury severities of real victims to physical parameter values measured on the dummies, the quality of the reconstructions is evaluated by experts who use their experience based on the investigation of numerous and various accidents. This paper presents a new tool aiming at better evaluating and validating accident reconstructions. It is based on statistical evaluation of vehicle deformations which gives weighing factors for every part of the car body structure finally leading to a specific Reconstruction Quality Score (RQS indicator). Furthermore, the reliability of this score, depending on the number of measured points, can be established. This tool includes a function aiming at adjusting the speed for a further reconstruction and at defining the launching speed and the pulse shape for complementary sled tests. Finally, the functions of the RQS software and database are presented.
Data concerning accidents involving personal injury which have been collected in the context of in-depth investigations on scene in the Hannover area since 1973 and in the Dresden area since 1999 represent an important basis for empirical traffic safety research. At national and international level various analyses and comparisons are carried out on the basis of "in-depth data" from the above mentioned investigations. In-depth data play a decisive role e.g. within the validation of EuroNCAP results on secondary safety (crashworthiness) of individual passenger car models. Thus, statistically sound methods of data analysis and population parameter estimation are of high importance. Since the 1st of August 1984 the "in-depth investigations on scene" in the Hannover area have been carried out according to a sampling plan developed by HAUTZINGER in the context of a research project on behalf of BASt. In the meantime a second region of in-depth investigation on scene was added with surveys in Dresden and the surrounding area. Internationally, the acronym GIDAS (German In-Depth Accident Study) is commonly used for the two above mentioned surveys. The objective of a current research project (topic of this contribution) is, among other things, to examine and adjust the previous weighting and expansion method for the two regional accident investigations to the current general conditions.