Sonstige
Filtern
Dokumenttyp
- Konferenzveröffentlichung (256)
- Buch (Monographie) (7)
Sprache
- Englisch (263) (entfernen)
Volltext vorhanden
- ja (263) (entfernen)
Schlagworte
- Conference (237)
- Konferenz (236)
- Germany (125)
- Accident (124)
- Unfall (124)
- Deutschland (122)
- Injury (86)
- Verletzung (85)
- Unfallrekonstruktion (72)
- Statistics (56)
- Statistik (55)
- Analyse (math) (53)
- Analysis (math) (52)
- Schweregrad (Unfall, Verletzung) (52)
- Severity (accid, injury) (50)
- Tödlicher Unfall (50)
- Fatality (49)
- Reconstruction (accid) (46)
- Data acquisition (39)
- Datenerfassung (39)
- injury) (38)
- Car (37)
- Datenbank (37)
- Simulation (37)
- Schweregrad (Unfall (36)
- Verletzung) (36)
- Cause (35)
- Fußgänger (35)
- On the spot accident investigation (35)
- Pedestrian (35)
- Untersuchung am Unfallort (35)
- Ursache (35)
- Severity (accid (34)
- Vehicle (30)
- Fahrzeug (29)
- Safety (29)
- Sicherheit (28)
- Data bank (27)
- Unfallverhütung (27)
- Zusammenstoß (27)
- Accident prevention (26)
- Accident reconstruction (26)
- Collision (26)
- Geschwindigkeit (25)
- Motorcyclist (24)
- Motorradfahrer (24)
- Speed (24)
- Cyclist (23)
- Radfahrer (23)
- Bewertung (22)
- Evaluation (assessment) (22)
- Leistungsfähigkeit (allg) (22)
- Anfahrversuch (21)
- Driver (21)
- Fahrer (21)
- PKW (21)
- Active safety system (20)
- Frontalzusammenstoß (20)
- Efficiency (19)
- Head on collision (19)
- Insasse (19)
- Aktives Sicherheitssystem (18)
- Europa (18)
- Europe (18)
- Method (18)
- Risiko (18)
- Test (18)
- Fahrerassistenzsystem (17)
- Verfahren (17)
- Interview (16)
- Vehicle occupant (16)
- Passives Sicherheitssystem (15)
- Pkw (15)
- Risk (15)
- Versuch (15)
- Sicherheitsgurt (14)
- Benutzung (13)
- Driver assistance system (13)
- Motorrad (13)
- Passive safety system (13)
- Use (13)
- Accident rate (12)
- Motorcycle (12)
- Safety belt (12)
- Überschlagen (12)
- Auffahrunfall (11)
- Child (11)
- Impact test (veh) (11)
- Kind (11)
- Rear end collision (11)
- Schutzhelm (11)
- Seitlicher Zusammenstoß (11)
- Unfallhäufigkeit (11)
- Berechnung (10)
- Crash helmet (10)
- Fahrzeugsitz (10)
- Head (10)
- Human factor (10)
- Kopf (10)
- Menschlicher Faktor (10)
- Overturning (veh) (10)
- Rechenmodell (10)
- Risikobewertung (10)
- Side impact (10)
- Age (9)
- Alter (9)
- Calculation (9)
- Database (9)
- Development (9)
- Entwicklung (9)
- Fahranfänger (9)
- Japan (9)
- Leg (human) (9)
- Mathematical model (9)
- Prognose (9)
- Recently qualified driver (9)
- Risk assessment (9)
- Seat (veh) (9)
- Airbag (8)
- Alte Leute (8)
- Behaviour (8)
- Brustkorb (8)
- Digital model (8)
- Fehler (8)
- Improvement (8)
- Lorry (8)
- Numerisches Modell (8)
- Old people (8)
- Verbesserung (8)
- Verhalten (8)
- Air bag (restraint system) (7)
- Antikollisionssystem (7)
- Austria (7)
- Biomechanics (7)
- Biomechanik (7)
- Error (7)
- Erste Hilfe (7)
- Fracture (bone) (7)
- Front (7)
- Knochenbruch (7)
- Krankenhaus (7)
- Prevention (7)
- Prüfverfahren (7)
- Test method (7)
- USA (7)
- Wirbelsäule (7)
- Österreich (7)
- Adolescent (6)
- Bein (menschl) (6)
- Bremsung (6)
- China (6)
- Collision avoidance system (6)
- Deformation (6)
- Driver training (6)
- Fahrausbildung (6)
- Forecast (6)
- Hospital (6)
- Impact study (6)
- India (6)
- Indien (6)
- Jugendlicher (6)
- Measurement (6)
- Ort (Position) (6)
- Portugal (6)
- Research report (6)
- Software (6)
- Thorax (6)
- Vereinigtes Königreich (6)
- Verformung (6)
- Verminderung (6)
- Wirksamkeitsuntersuchung (6)
- Analyse (Math) (5)
- Braking (5)
- Cervical vertebrae (5)
- Correlation (math, stat) (5)
- Decrease (5)
- EU (5)
- Eins (5)
- First aid (5)
- Halswirbel (5)
- Impact test (5)
- Knotenpunkt (5)
- Location (5)
- One (5)
- Post crash (5)
- Spinal column (5)
- Vehicle regulations (5)
- Vorn (5)
- Angle (4)
- Bremse (4)
- Coefficient of friction (4)
- Collision test (veh) (4)
- Cost benefit analysis (4)
- Delivery vehicle (4)
- Distraction (4)
- Dynamics (4)
- Dynamik (4)
- Electronic stability program (4)
- Estimation (4)
- Fahrdatenschreiber (4)
- Fahrgeschicklichkeit (4)
- Forschungsbericht (4)
- France (4)
- Frankreich (4)
- Frau (4)
- Interior (veh) (4)
- Junction (4)
- Korrelation (math, stat) (4)
- LKW (4)
- Messung (4)
- Modification (4)
- Oberflächentextur (4)
- Occupant (veh) (4)
- Policy (4)
- Politik (4)
- Regression analysis (4)
- Regressionsanalyse (4)
- Reibungsbeiwert (4)
- Schweden (4)
- Sensor (4)
- Sichtbarkeit (4)
- Surface texture (4)
- Unfallfolgemaßnahme (4)
- United Kingdom (4)
- Verhütung (4)
- Veränderung (4)
- Sichtbarkeit (4)
- Winkel (4)
- Wirtschaftlichkeitsrechnung (4)
- Ablenkung (psychol) (3)
- Anthropometric dummy (3)
- Befreiung (Bergung) (3)
- Bicycle (3)
- Blickfeld (3)
- Brake (3)
- Bus (3)
- Coach (3)
- Crash test (3)
- Czech Republic (3)
- Damage (3)
- Drunkenness (3)
- Effectiveness (3)
- Elektronisches Stabilitätsprogramm (3)
- Erziehung (3)
- Event data recorder (road vehicle) (3)
- Extrication (3)
- Fahrrad (3)
- Fahrstabilität (3)
- Fahrzeuginnenraum (3)
- Field of vision (3)
- Finite element method (3)
- Human body (3)
- Impact sled (3)
- Information (3)
- Information documentation (3)
- International (3)
- Kleidung (3)
- Korea (Süd) (Demokratische Republik) (3)
- Lieferfahrzeug (3)
- Lkw (3)
- Man (3)
- Mann (3)
- Menschlicher Körper (3)
- Passenger (3)
- Probability (3)
- Reisebus (3)
- Republic of Korea (3)
- Run off the road (accid) (3)
- Sachschaden (3)
- Schutzeinrichtung (3)
- Seite (3)
- Skill (road user) (3)
- Steifigkeit (3)
- Stiffness (3)
- Technische Vorschriften (Kraftfahrzeug) (3)
- Technologie (3)
- Technology (3)
- Time (3)
- Trunkenheit (3)
- Tschechische Republik (3)
- United kingdom (3)
- Vehicle handling (3)
- Verkehrsteilnehmer (3)
- Verschiebung (3)
- Versuchspuppe (3)
- Wahrscheinlichkeit (3)
- Woman (3)
- Zeit (3)
- Abbiegen (2)
- Abdomen (2)
- Abkommen von der Fahrbahn (Unfall) (2)
- Accompanied driving (2)
- Accuracy (2)
- Advanced driver assistance system (2)
- Aufprallschlitten (2)
- Ausrüstung (2)
- Australia (2)
- Australien (2)
- Automatisch (2)
- Automatische Notbremsung (2)
- Autonomous emergency braking (2)
- Begleitetes Fahren (2)
- Behinderter (2)
- Bein (2)
- Beinahe Unfall (2)
- Belastung (2)
- Blutkreislauf (2)
- Body (car) (2)
- Bremsweg (2)
- Camera (2)
- Carbon dioxide (2)
- Circulation (blood) (2)
- Classification (2)
- Clothing (2)
- Compatibility (2)
- Compliance (specif) (2)
- Contact (tyre road) (2)
- Cost (2)
- Crash victim (2)
- Crossing the road (2)
- Decision process (2)
- Deformable barrier (impact test) (2)
- Depth (2)
- Detection (2)
- Deutschalnd (2)
- Digital image processing (2)
- Digitale Bildverarbeitung (2)
- Disablement (2)
- Dreidimensional (2)
- Driver information (2)
- Driving (veh) (2)
- Driving test (2)
- EU directive (2)
- EU-Richtlinie (2)
- Edge (2)
- Education (2)
- Eindringung (2)
- Eingabedaten (2)
- Einstellung (psychol) (2)
- Electric bicycle (2)
- Electronic driving aid (2)
- Elektrofahrrad (2)
- Emission (2)
- Entdeckung (2)
- Entscheidungsprozess (2)
- Equipment (2)
- Ergonomics (2)
- Ergonomie (2)
- Eu (2)
- Exhaust aftertreatment (2)
- Experience (human) (2)
- Fahrbahnüberquerung (2)
- Fahrprüfung (2)
- Fahrsimulator (2)
- Fahrzeugführung (2)
- Fernverkehrsstraße (2)
- Fire (2)
- Forschungsarbeit (2)
- Führerschein (2)
- Geländefahrzeug (2)
- Gesetzesübertretung (2)
- Government (national) (2)
- Griffigkeit (2)
- Harmonisation (2)
- Hazard (2)
- Head restraint (2)
- Highway (2)
- Highway design (2)
- Hinten (2)
- In service behavior (2)
- Input data (2)
- Kamera (2)
- Karosserie (2)
- Klassifizierung (2)
- Knee (human) (2)
- Knie (menschl) (2)
- Kompatibilität (2)
- Kontakt Reifen Straße (2)
- Kontrolle (2)
- Kopfstütze (2)
- Kosten (2)
- Kunststoff (2)
- Langfristig (2)
- Load (2)
- Long term (2)
- Main road (2)
- Medical aspects (2)
- Medizinische Gesichtspunkte (2)
- Medizinische Untersuchung (2)
- Methode der finite Elemente (2)
- Methode der finiten Elemente (2)
- Mobile phone (2)
- Mobiltelefon (2)
- Model (not math) (2)
- Modell (2)
- Movement (2)
- Near miss (2)
- Netherlands (2)
- Niederlande (2)
- Offence (2)
- Output (2)
- Overlapping (2)
- Penetration (2)
- Plastic material (2)
- Posture (2)
- Quality (2)
- Quality assurance (2)
- Qualität (2)
- Qualitätssicherung (2)
- Reaction (human) (2)
- Reaktionsverhalten (2)
- Rear (2)
- Recording (2)
- Regierung (staat) (2)
- Restraint system (2)
- Road traffic (2)
- Road user (2)
- Safety fence (2)
- Severity (acid (2)
- Shock (2)
- Simulator (driving) (2)
- Skidding resistance (2)
- Spain (2)
- Spanien (2)
- Specifications (2)
- Sport utility vehicle (2)
- Standardisierung (2)
- Straßenentwurf (2)
- Straßenverkehr (2)
- Surveillance (2)
- Sweden (2)
- Telefon (2)
- Telephone (2)
- Theorie (2)
- Theory (2)
- Three dimensional (2)
- Tiefe (2)
- Trend (stat) (2)
- Turn (2)
- Unfallopfer (2)
- Unterleib (2)
- Vorne (2)
- Wet road (2)
- Windschutzscheibe (2)
- Zeitreihe (stat) (2)
- Überlappung (2)
- Ability (road user) (1)
- Abkommen von der Fahrbahn (1)
- Ablenkung (1)
- Absorption (1)
- Abstandsregeltempomat (1)
- Acceleration (1)
- Acceptability (1)
- Accident black spot (1)
- Accident proneness (1)
- Accident severity (1)
- Active safety system; Automatic; Brake; Car; Collision avoidance system; Conference; Driver assistance system; Germany; Impact test (veh); Rear end collision; Severity (accid (1)
- Activity report (1)
- Adaptive cruise controll (1)
- Administration (1)
- Adult (1)
- Aggression (psycho) (1)
- Aggression (psychol) (1)
- Air traffic control (1)
- Airbag (restraint system) (1)
- Alternative (1)
- Analyse (1)
- Analyses (math) (1)
- Anthropometrie (1)
- Anthropometry (1)
- Anti locking device (1)
- Antiblockiereinrichtung (1)
- Apparatus (measuring) (1)
- Arbeitsgruppe (1)
- Arm (human) (1)
- Arm (menschl) (1)
- Atives Sicherheitssystem (1)
- Attention (1)
- Attitude (psychol) (1)
- Audit (1)
- Auffharunfall (1)
- Aufmerksamkeit (1)
- Aufzeichnung (1)
- Aufzeichung (1)
- Autobahn (1)
- Automatic (1)
- Autotür (1)
- Back (human) (1)
- Batterie (1)
- Battery (1)
- Baumusterzulassung (1)
- Baustoff (1)
- Bein [menschl] (1)
- Bemessung (1)
- Bepflanzung (1)
- Beschleunigung (1)
- Bevölkerung (1)
- Bewehrung (1)
- Bone (1)
- Braking distance (1)
- Brand (1)
- Breaking (1)
- Bruch (mech) (1)
- Budget (1)
- Car door (1)
- Catalytic converter (1)
- Chest (1)
- Cognitive impairment (1)
- Colthing (1)
- Communication (1)
- Comprehension (1)
- Compression (1)
- Computation (1)
- Concentration (chem) (1)
- Conference; Germany; Injury; Medical examination; Spinal column; X ray (1)
- Contact (tyre (1)
- Crashtest (1)
- Cross roads (1)
- Cycle track (1)
- Cycling (1)
- Damping (1)
- Data base (1)
- Data transmission (telecom) (1)
- Datenübertragung (Telekom) (1)
- Datenübertragung (telekom) (1)
- Dauer (1)
- Day (24 hour period) (1)
- Deformierbare Barriere (Anpralltest) (1)
- Deformierte Barriere (Anpralltest) (1)
- Density (1)
- Design (overall design) (1)
- Detektion (1)
- Dichte (1)
- Diesel engine (1)
- Digital computer (1)
- Digitalrechner (1)
- Displacement (1)
- Distribution (gen) (1)
- Driving aid (electronic) (1)
- Driving licence (1)
- Driving license (1)
- Dtetection (1)
- Durability (1)
- Durchsichtigkeit (1)
- Dynamic penetration test (1)
- Dämpfung (1)
- Eigenschaft (1)
- Ejection (1)
- Elastizitätsmodul (1)
- Electric vehicle (1)
- Electronics (1)
- Elektrofahrzeug (1)
- Elektronik (1)
- Elektronisches Stabilitätsprogram (1)
- Emergency (1)
- Emergency medical aid (1)
- Energie (1)
- Energy (1)
- Enforcement (law) (1)
- Entgleisung (Zug) (1)
- Erfahrung (menschl) (1)
- Erwachsener (1)
- Event data recorder (Road vehicle) (1)
- Expert system (1)
- Expertensystem (1)
- Expressway (1)
- Face (human) (1)
- Facility (1)
- Fahrererfahrung (1)
- Fahrerinformationen (1)
- Fahrzeugdach (1)
- Fahrzeugflotte (1)
- Fahrzeugrückhaltesystem (1)
- Fahrzeugteil (Sicherheit) (1)
- Fatigue (human) (1)
- Fear (1)
- Fence (1)
- Feuer (1)
- Financing (1)
- Finanzierung (1)
- Finland (1)
- Finnland (1)
- Fleet of vehicles (1)
- Flugsicherung (1)
- Foot (not a measure) (1)
- Form (1)
- Frequency (1)
- Friction (1)
- Fuel consumption (1)
- Fuel tank (1)
- Furcht (1)
- Fuß (1)
- Führerschein Punktesystem (1)
- Gas (1)
- Genauigkeit (1)
- Geografisches Information System (1)
- Geographical information system (1)
- Geometry (shape) (1)
- Geradeausverkehr (1)
- Geschwindigkeitsbeschränkung (1)
- Gesetzesdurchführung (1)
- Gesetzgebung (1)
- Gesicht (1)
- Gesundheit (1)
- Gewicht (1)
- Harmonisierung (1)
- Health (1)
- Herausschleudern (1)
- Hip (human) (1)
- Homogeneity (1)
- Homogenität (1)
- Hospitsl (1)
- Häufigkeit (1)
- Hüfte (1)
- Illness (1)
- Image analysis (1)
- Image generation (1)
- Impact (collision) (1)
- In situ (1)
- Incident detection (1)
- Inertia reel safety belt (1)
- Infotainment System (1)
- Infotainment system (1)
- Installation (1)
- Interactive model (1)
- Interaktives Modell (1)
- Intersection (1)
- Inventar (1)
- Inventory (1)
- Ireland (1)
- Irland (1)
- Italien (1)
- Italy (1)
- Itinerary (1)
- Jahreszeit (1)
- Knochen (1)
- Kognitive Beeinträchtigung (1)
- Kohlendioxid (1)
- Kommunikation (1)
- Kontakt Reifen-Straße (1)
- Konzentration (1)
- Korea (Süd) (1)
- Korrelation [math (1)
- Kraftstofftank (1)
- Krankheit (1)
- Kreisverkehrsplatz (1)
- Kreuzung (1)
- Körperhaltung (1)
- Körperstellung (1)
- Lap strap (1)
- Lateral (1)
- Lateral collision (1)
- Learning (1)
- Legislation (1)
- Leistungsfähigkeit (Allg.) (1)
- Length (1)
- Links (1)
- Länge (1)
- Lärm (1)
- Malaysia (1)
- Massenunfall (1)
- Material (constr) (1)
- Mathematical Model (1)
- Matrix (1)
- Mean (math) (1)
- Medical examination (1)
- Text (1)
- Messgerät (1)
- Mittelwert (1)
- Mobility (1)
- Mobilität (1)
- Modulus of elasticity (1)
- Montage (1)
- Moped (1)
- Motor (1)
- Motorisierungsgrad (1)
- Multiple collision (1)
- Müdigkeit (1)
- Nachricht (1)
- Nasse Strasse (1)
- Nasse Straße (1)
- Nigeria (1)
- Noise (1)
- Nordamerika (1)
- Norm (tech) (1)
- North America (1)
- Norway (1)
- Norwegen (1)
- Notfall (1)
- Nummer (1)
- Nutzwertanalyse (1)
- Official approval (1)
- Offset impact test (1)
- On the left (1)
- On the right (1)
- On the spot investigation (1)
- Organisation (1)
- Organization (association) (1)
- Overturning (1)
- Oxygen (1)
- Padding (safety) (1)
- Partnerschaft (1)
- Partnership (1)
- Perception (1)
- Personal (1)
- Personnel (1)
- Pfosten (1)
- Planning (1)
- Planung (1)
- Point demerit system (1)
- Pole (1)
- Police (1)
- Polizei (1)
- Population (1)
- Portable (1)
- Position (1)
- Pregnancy (1)
- Properties (1)
- Protective helmet (1)
- Prototyp (1)
- Prototype (1)
- Provisorisch (1)
- Pssives Sicherheitssystem (1)
- Psychological aspects (1)
- Psychologische Gesichtspunkte (1)
- Public transport (1)
- QAccident (1)
- Quality management system (1)
- Qualitätsmanagementsystem (1)
- Radfahren (1)
- Radweg (1)
- Rail bound transport (1)
- Rail traffic (1)
- Rammsondierung (1)
- Rechts (1)
- Reconstruction [accid] (1)
- Reduction (decrease) (1)
- Rehabilitation (1)
- Rehabilitation (road user) (1)
- Reibung (1)
- Reifen (1)
- Reifenprofil (1)
- Reinforcement (in mater) (1)
- Reiseweg (1)
- Republic of Corea (1)
- Research project (1)
- Research projekt (1)
- Residential area (1)
- Resuscitation (1)
- Reversing (veh) (1)
- Rib (1)
- Richtlinie (1)
- Richtlinien (1)
- Risk taking (1)
- Road network (1)
- Road transport (1)
- Roll over (veh) (1)
- Roof (veh) (1)
- Rotation (1)
- Roundabout (1)
- Rsk (1)
- Rupture (1)
- Röntgenstrahlung (1)
- Rücken (1)
- Rücksichtslosigkeit (1)
- Rückwärtsfahren (1)
- Safety glass (1)
- Safety harness (1)
- Safety system (1)
- Saftey (1)
- Sample (stat) (1)
- Sauerstoff (1)
- Schienentransport (1)
- Schienenverkehr (1)
- Schlag (1)
- Schleudertrauma (1)
- Schwangerschaft (1)
- Schweiz (1)
- Schweregrad (UNfall (1)
- Schätzung (1)
- Season (1)
- Seat (1)
- Seat belt (1)
- Seat harness (1)
- Severity (accid, injuy) (1)
- Sicherheitsglas (1)
- Sicherheitspolsterung (1)
- Side (1)
- Significance (1)
- Signifikanz (1)
- Specification (standard) (1)
- Speed limit (1)
- Speed) (1)
- Spinal calum (1)
- Spreading (1)
- Sri Lanka (1)
- Stadt (1)
- Stahl (1)
- Standard test run (1)
- Standardization (1)
- Statistik (math) (1)
- Steel (1)
- Stichprobe (1)
- Stochastic process (1)
- Stochastischer Prozess (1)
- Stopping distance (1)
- Straight ahead (traffic) (1)
- Strasse (1)
- Straße (1)
- Straßennetz (1)
- Straßentransport (1)
- Störfallentdeckung (1)
- Switzerland (1)
- Systemanalyse (1)
- Systems analysis (1)
- Tag (24 Stunden) (1)
- Technische Vorschriften (1)
- Temporary (1)
- Tension (1)
- Thailand (1)
- Toxicity (1)
- Toxizität (1)
- Traffic (1)
- Traffic restraint (1)
- Tragbar (1)
- Transparent (1)
- Transport infrastructure (1)
- Transport operator (1)
- Transportunternehmen (1)
- Traveler (1)
- Two dimensional (1)
- Tyre (1)
- Tyre tread (1)
- Tätigkeitsbericht (1)
- Underride prevention (1)
- Unfallfolgephase (1)
- Unfallneigung (1)
- Unfallrate (1)
- Unfallrekonsruktion (1)
- Unfallschwerpunkt (1)
- Unfallverhütug (1)
- Ungeschützter Verkehrsteilnehmer (1)
- Unterfahrschutz (1)
- Untersuchung am Umfallort (1)
- Urban area (1)
- Usa (1)
- Value analysis (1)
- Variance analysis (1)
- Varianzanalyse (1)
- Vegetation (1)
- Vehicle ownership (1)
- Vehicle restraint system (1)
- Vehicle safety device (1)
- Veletzung) (1)
- Vereinigtes Königreichl (1)
- Verfahen (1)
- Verkehr (1)
- Verkehrsbeschränkung (1)
- Verkehrsinfrastruktur (1)
- Vermeidung (1)
- Verständnis (1)
- Verteilung (allg) (1)
- Verteilung (mater) (1)
- Verwaltung (1)
- Visualisation (1)
- Visualisierung (1)
- Vulnerable road user (1)
- Wahrnehmung (1)
- Wasser (1)
- Water (1)
- Weather (1)
- Weight (1)
- Whiplash injury (1)
- Window (veh) (1)
- Windscreen (veh) (1)
- Witterung (1)
- Wohngebiet (1)
- Women (1)
- Working group (1)
- Zahl (1)
- Zug (mech) (1)
- Zusammendrückung (1)
- Zweidimensional (1)
- accident (1)
- aktives Sicherheitssystem (1)
- analyses (math) (1)
- ar (1)
- efficiency (1)
- fatality (1)
- finite element method (1)
- head (1)
- road) (1)
- simulation (1)
- stat] (1)
- tödlicher Unfall (1)
- Öffentlicher Verkehr (1)
Institut
- Sonstige (263) (entfernen)
Introduction: Spine injuries pose a considerable risk to life and quality of life. The total number of road deaths in developed countries has markedly decreased, e.g. in Germany from over 20000 in 1970 to less than 4000 in 2010, but little is known how this is reflected in the burden of spine fractures of motor vehicle users. In this study, we aimed to show the actual incidence of spine injuries among drivers and front passengers and elucidate possible dependencies between crash mechanisms and types of injuries.
Beside numerous information about vehicles injuries and environmental data the GIDAS database contains detailed reconstruction data. This data is calculated by a reconstruction engineer who handles about 1000 accidents per year. The spectrum of one reconstruction ranges from simple crossing accidents to complex run-off accidents with rollover events. Especially for complex accident scenarios there is a large effort to design the environment of the accident scene within PC-Crash ®. To reduce the reconstruction time by maintaining the high quality of reconstruction 3D-geodata can be useful. Geodata is available for nearly every area in Germany and can be used for a fast and detailed creation of complex accident environments. In combination with the accident sketch areal images of the accident scene can be created and the participants are implemented in the new-built 3D-reconstruction environment. As a consequence, the characteristics of the terrain can be considered within the reconstruction which is especially important for run-off accidents.
Rollovers continue to be a major source of heavy truck fatalities when compared to other accident modes. Real world rollover accidents are analyzed and two distinct damage patterns are identified. Damage to heavy truck roofs can occur from lateral loading that transitions to vertical roof loading as the vehicle rolls onto its side and then over onto its roof. A second load path can occur when the vehicle has rolled onto its side and furrows into the ground generating large longitudinal friction forces between the roof and ground. A review of the previous literature and various test methodologies are presented. A sled impact test methodology is presented which allows for structural assessment of a heavy truck cab's crashworthiness in both of these loading environments. Two test series are presented using the sled impact test methodology in order to analyze real world truck rollovers using varying impact platen and contact angles. The structural deformation and failure patterns were found to be consistent with damage seen in real world accident vehicles. In each case, a second equivalent truck cab was then reinforced and tested under similar conditions to evaluate the energy management and crush resistance of a stronger cab structure. These structural reinforcements demonstrated a substantial reduction in roof crush and protected the survival space of the occupant compartment. The sled impact test procedure is an effective method for testing the structural performance of a heavy truck cab in a variety of loading scenarios comparable to real world accidents and ascertaining the load and energy load levels in these accident modes.
Supervision of the safety performance in public transport is one of the main tasks of the Federal Office of Transport (FOT) in Switzerland. Recently a three level system of safety indicators has been defined to cover all means of Swiss public transport. The safety indicators are fed by the FOT incident database since the year 2000. In cooperation with the Institute for Traffic Safety and Automation Engineering (iVA) at TU Braunschweig, Germany, FOT is developing a suitable methodology for the definition and evaluation of the safety targets in Swiss public transport. The methodology is applied for evaluation of safety indicators on a country level and for single transport companies. In a new approach the abovementioned methodology is applied to car incident data to develop an indicator based cross-modal safety measure.
A concept for Safe-Driving-Trainings with a focus on risky behavior and safety related attitudes has been evaluated. 519 participants have been tested before and after the training by means of a questionnaire with the topics: technical driving competence, awareness of risks, and propensity for anticipation. A control group (131 subjects) was used to check for the possibility of response artifacts. Three months later, 92 members of the treatment group and 25 members of the control group have been tested again. The results show significant positive changes in driving competence, risk awareness, and safety related attitudes, especially anticipation, due to the training. Compared to the control group the participants have become more risk aware and they regard of risk avoiding behavior as more important. The results show that this concept for Safe-Driving-Trainings has not only short-term but, more importantly, long-term positive effects on the safety-relevant attitudes and cognitions of young drivers.
To date, the Trauma Registry (TraumaRegister DGU-® contains data of approximately 100.000 severely injured patients, 65% of which suffered from a road traffic crash. Thus, it is the world's largest data base for severely injured patients. The article describes the development of the registry and explains how it was rolled out over Germany using the established structure of the German Trauma Network (TraumaNetzwerk DGU-®). In addition, this article presents three typical use cases from the fields of quality management, policy making and system-wide interventions, clinical research and injury prevention. In conclusion, the TraumaRegister DGU-® is a well-established tool for various purposes related to the control and reduction of the burden of road injury. Its ongoing expansion to other countries will support the goal of international benchmarking of hospitals and trauma systems.
Police records about traffic accidents like used by IRTAD (International Road Traffic and Accident Database) and CARE (Community Road Accident Database) do not represent all road injuries. For instance, road accidents of bicyclists without a counterpart are usually not reported. Furthermore, IRTAD-like data contains hardly any information on injury outcome and accident circumstances. This information gap leads to an under-representation of the safety concerns of the most vulnerable road users like children and the elderly both in accident research and safety promotion. Injury registration for the European Injury Database (IDB), in turn, combines details of accident causation with diagnostic information that can be used to assess injury severity and long term consequences. The IDB is collecting data from hospital emergency department patients and is being implemented in a growing number of countries. In this article IDB results on mode of transport and injury outcome are presented from a sample of nine EU member states.
Automotive interiors have long been a potentially injurious impact area to occupants during accidents, especially in the absence of adequate padding. The U.S. Federal Motor Vehicle Safety Standard (FMVSS) 201, Occupant Protection in Interior Impact, outlines test procedures and performance criteria in order to mitigate potentially injurious head impacts to interior surfaces. FMVSS 201 specifies a finite set of impact locations and applies to passenger vehicles of a specified year range and with a gross vehicle weight rating less than 10,000 lb. In this paper, two head impact test methodologies are presented, a pendulum-test device and a Free Motion Headform (FMH) launching device, which allows for dynamic, repeatable impact evaluation of various vehicle interior surfaces and their impact attenuation abilities. The presented testing includes multiple series that evaluate the effect of differing vehicle upper interior padding on occupant head injury. One study in particular, analyzes a head impact to the side header of a heavy truck (not included in FMVSS 201) during a 90 degree rollover. Additionally, two other series of tests are presented which assess the injury reduction effect of side airbags to near side as well as far side occupants in a side impact scenario. Lastly, a forensic analysis is presented which evaluates two possible head impact locations experienced in a real world accident by analysis of the resulting interior compartment damage utilizing the FMH launching device test method. The data collected and presented includes accelerometer instrumentation and high speed video analysis. These studies demonstrate that adequate padding and airbags are very effective at mitigating head injury potential at impact speeds of 12-25 mph (19-40 kph).
The paper aims to study the injury risk and kinematics of pedestrians involved in different passenger vehicle collisions. Furthermore, the difference of pedestrian kinematics in the accidents involved minivan and sedan was analyzed. The 18 sample cases of passenger car to pedestrian collisions were selected from the database of In-depth Investigation of Vehicle Accident in Changsha of China (IVAC),of which the 12 pedestrian accidents involved in a minivan impact for each case, and the 6 accidents in a sedan impact for each. The selected cases were reconstructed by using mathematical models of pedestrians and accident vehicles in a multi-body dynamic code MADYMO environment. The logistic regression models of the risks for pedestrian AIS 3+ injuries and fatalities were developed in terms of vehicle impact speed by analyzing the minivan-pedestrian and sedan-pedestrian accidents. The difference of pedestrian kinematics was identified by comparing the results from reconstructed pedestrian accidents between the minivans and sedans collisions. The result shows that there is a significant correlation among the impact speed and the severity of pedestrian injuries. The minivan poses greater risk to pedestrian than sedan at the same impact speed. The kinematics of pedestrian was greatly influenced by vehicle front shape.
The misuse of CRS (child restraint system) is one of the most urgent problems in connection of child safety in cars. Numerous field studies show that more than two thirds of all CRS are used in a wrong way. This misuse could lead to serious injuries for the children. Surprisingly the quality of CRS use is coded much better in accident data (e.g. GIDAS) than the results of observatory field studies show. It is expected that misuse of CRS was not detected by the accident teams in a large number of the cases. An essential part in improving child seats and their usability is the knowledge of the relation between misuse and resulting injuries. For that the analysis and experimental reconstruction of accidents is an important part. For allowing an exact experimental accident reconstruction, it is necessary to have detailed information about the securing situation of the child and about the installation of the CRS in the car.
This paper will outline ETSC's contribution to the European Union's road safety policy 2011-2020. It will present some of the main recommendations from ETSC's Blueprint for the 4th Road Safety Action Programme and will introduce the response to the European Commission's Road Safety Policy Orientations 2011-2020 (published July 2010). The second framework document presented is the Transport White Paper (published March 2011). The paper will focus on new targets and the new vision set for Europe's Road Safety policy picking out some issues in particular such as traffic law enforcement and the protection of vulnerable road users. It will argue that by reinforcing the current Road Safety Policy Orientations, the EU will be better placed to reach its new ambitious goal of halving road deaths by 2020 and the longer term zero casualty vision.
A series of drop tests and vehicle tests with the adult head impactor according to Regulation (EC) 631/2009 and drop tests with the phantom head impactor according to UN Regulation No. 43 have been carried out by the German Federal Highway Research Institute (BASt) on behalf of the German Federal Ministry of Transport, Building and Urban Development (BMVBS). Aim of the test series was to study the injury risk for vulnerable road users, especially pedestrians, in case of being impacted by a motor vehicle in a way described within the European Regulations (EC) 78/2009 and (EC) 631/2009. Furthermore, the applicability of the phantom head drop test described in UN Regulation No. 43 for plastic glazing should be investigated. In total, 30 drop tests, thereof 18 with the adult head impactor and 12 with the phantom head impactor, and 49 vehicle tests with the adult head impactor were carried out on panes of laminated safety glass (VSG), polycarbonate (PC) and laminated polycarbonate (L-PC). The influence of parameters such as the particular material properties, test point locations, fixations, ambient conditions (temperature and impact angle) was investigated in detail. In general, higher values of the Head Injury Criterion (HIC) were observed in tests on polycarbonate glazing. As the HIC is the current criterion for the assessment of head injury risk, polycarbonate glazing has to be seen as more injurious in terms of vulnerable road user protection. In addition, the significantly higher rebound of the head observed in tests with polycarbonate glazing is suspected to lead to higher neck loads and may also cause higher injury risks in secondary impacts of vulnerable road users. However, as in all tests with PC glazing no damage of the panes was observed, the risk of skin cut injuries may be expected to be reduced significantly. The performed test series give no indication for the test procedure prescribed in UN Regulation No. 43 as a methodology to approve glass windscreen not being feasible for polycarbonate glazing, as all PC panes tested fulfilled the UN R 43 requirements. The performance of the windscreen area will not be relevant for vehicle type approval according to the upcoming UN Regulation for pedestrian protection. However, it is recommended that pedestrian protection being considered for plastic windscreens to ensure at least the same level of protection as glass windscreens.
Various kinds of demerit point systems have been developed and implemented in European countries, aimed at tackling repeat offences in road transport by acting as a deterrent and providing sanctioning. The impact of a demerit point system on the number of crashes is often reported to be significant, but temporary. The objective of the EU BestPoint project was to establish a set of recommended practices that would result in a more effective and sustainable contribution of demerit point systems to road safety. A high actual chance of losing the licence and a high perceived chance of losing the licence are basic prerequisites for the effective operation of demerit point systems. For measures applied within the context of a demerit point system, a four-step-approach is recommended: warning letter, driver improvement course, licence withdrawal, rehabilitation course. Further recommendations concern issues like points and offences, e.g. which offences should lead to points, target groups, and the administration of demerit point systems. The final result of the EU BestPoint project is a handbook (van Schagen & Machata, 2012) which provides a concise overview of all recommended practices. The presentation/paper outlines how sustainable safety improvements can be achieved if national demerit point systems are implemented and maintained according to the recommended practices. In addition, potential further steps towards an EU-wide demerit point system (cross-border exchange on points and/or offences) are presented.
Although the bus belongs to the safest traffic means, single accidents can be particularly severe and concern many passengers. Especially in case of fires a high number of injured and killed persons can be the outcome. Fire safety of buses therefore is of high importance. With the increase of plastic materials as a material for the interior equipment of buses and coaches due to their good mechanical properties combined with low weight, the question arises whether the safety level has decreased in case of a fire during the last years " also compared to other means of transport. Because of the combustible plastics and their ability to release a high amount of heat the main fire load in buses is no longer the fuel but the plastic materials which are also often easy to ignite. Besides the flammability of the equipments, also the production of smoke, the smoke development and propagation as well as its toxicity are of interest. That counts for the passengers as well as for the test methods and its limit values. The severe fire in Germany near Hanover in 2008 with 20 fatalities showed how disastrous such fires can be. For those reasons several research projects were initiated on behalf of the German Federal Highway Research Institute. At the one hand the fire behaviour of coach interiors was examined in general focusing on fire propagation as well as fire detection and signalling. As result, recommendations with regard to early fire detection systems for the engine compartments and onboard extinguishing equipment were elaborated. On the other hand research was carried out to examine heat release, smoke, smoke propagation and its toxicity due to burning bus interior materials. In this project small and real scale experiments on material specimens, interior parts and vehicles were performed. Trains and buses often have very similar operation conditions. Consequently, bus interior material was tested according to the regulations for rail vehicles, i.e. DIN EN 45545 as well as DIN 5510. None of the tested bus interior materials would have been allowed to use in a train. The fire safety regulations for bus materials are on a low level compared to other transport sectors, i.e. railway, ship and aircraft. Also numerical investigations with the Fire Dynamics Simulator (FDS) were performed. The very rapid fire development during the severe bus fire from 2008 could be predicted with the numerical model. The model was then used to investigate the influence of different materials, ventilation conditions and ignition sources. The bus materials contribute significantly to a very rapid fire development in bus fires. Especially, the flammable ceiling and the passenger seats were identified to be key issues of the fire propagation in a bus and can be explained by the rapid fire spread along the ceiling and the high fire load of passenger seats. As conclusion of the project effective and economically reasonable fire safety requirements for interiors of buses are recommended which would improve the current situation. Proposals for amendments of current requirements are recommended including the specification of appropriate limit values. In particular, it is taken into consideration which reasonable fire safety standards from other transport sectors, especially the rail sector, should be transferred to buses
Mobility plays an important role in the Federal Republic of Germany. Motorised private transport and, consequently, passenger vehicles are the crucial factor. Vehicles should be environmentally and socially compatible yet also economically efficient at the same time. The crucial factor for pollution of the environment from road traffic is the exhaust emissions of the vehicles on the road. This is why, with the Directive 98/69/EC and the related introduction of exhaust emission standard Euro 3, the testing of the conformity of passenger and light commercial vehicles (in-service conformity check) was introduced. Vehicles already on the roads are to be examined again under type examination conditions (Type I Test) after a statistical selection process. In this way it is to be ensured that the systems and components relevant for the exhaust emissions of a vehicle will also function after several thousand kilometres. This is why the vehicles are checked again during in-service conformity check with respect to their limited pollution components. Due to the ever greater significance of CO2 emissions, both the CO2 emissions and the fuel consumption were included in this research project. For the success of such a project the choice of vehicle is of critical importance. Since this is the only way it is possible to also obtain a representative result. Therefore, in addition to the selection criteria required by law, statistical and technical criteria are also considered. The vehicle owners were selected on a random basis. All test vehicles were checked with respect to their pollutant components in the emissions laboratory in accordance with their standard. By law the same testing conditions apply in an in-service conformity check as in the relevant type approval. In this research project a total of 17 vehicle types were examined. Six types were equipped with positive-ignition engines and 11 types with compression ignition engines. Both groups were to each include vehicles of the limits Euro 4 and Euro 5. For vehicle types with positive-ignition engines, there was one type with the exhaust emission standard Euro 5. All others satisfied the exhaust emission standard Euro 4. For the vehicle types with compression ignition engines, 4 types satisfied exhaust emission standard Euro 5 and 7 types fulfilled exhaust emission standard Euro 4. Among the vehicle types with compression ignition and exhaust emission standard Euro4, there were 4 types of category M1 and 3 types of category N1 of class III. The aim of the research project is to examine the exhaust emissions in-service conformity of passenger and light commercial vehicles in operation to draw conclusions concerning the durability of engine components and systems for exhaust emission treatment. Overall in this in-service conformity testing programme, we were able, in accordance with the statistical procedure, to assess all 17 of the vehicle types tested as "positive". With the exception of one vehicle type, it was possible to conclude the random test for all vehicle types tested with the minimum random sample. This means that all 3 vehicles of one type in as-delivered condition complied with or fell below the respective limits for pollutant emissions according to the criteria of the statistical procedure. In the case of one vehicle type, where the random sample had to be enlarged, it was necessary to examine a total of 8 vehicles. Furthermore, with all vehicle types the CO2-emissions and fuel consumption (Type I Test) were determined to subsequently compare the measured CO2 emissions with those of the manufacturers. Of the 17 vehicle types examined, eleven vehicle types complied with the relevant manufacturers" values or fell below them. With six vehicle types, the CO2 emissions were more than the permissible 4% above the manufacturer- value during the Type I Test.
Within the overall system of novice driver preparation, the practical driving test plays an especially important role for the objective of improved driving safety: On the one hand, the test contents, assessment criteria and test results provide important orientation for the organisation of driving school training and the individual learning processes of the novice drivers (control function); on the other hand, the practical test serves to ensure that only novice drivers with adequate driving competence are entitled to participate in motorised road traffic (selection function). The aim of the present project is to elaborate a scientifically founded model for a future, optimised practical driving test, together with a contextual and methodical (implementation) concept for its continuous maintenance, quality assurance and further development. In addition, the institutional structures of the test system, test methods and test procedures - including the necessary demand, assessment, documentation and evaluation standards - are to be described in a "System Manual on Driver Licensing (Practical Test)". As a first step, selected psychology-based driving competence models and the contents of training and test documents are to be analysed. The results of this analysis will then serve as the starting point for a discussion of possibilities to model and measure driving competence, and for the outlining of a driving competence model for the theoretical determination of appropriate test content. Subsequently, demand standards for an optimised practical driving test can be derived by applying action theory principles to the demands of motor vehicle handling, and thereby defined as minimum personal standards for driving test candidates. This elaboration is to take into account not only latest knowledge from the fields of traffic and test psychology, but also relevant stipulations in licensing regulations, international trends in the further development of test standards, and novice-specific accident causes and competence deficits. A further outcome of the project - alongside theoretical-methodical foundations for optimisation of the practical driving test and for the draft of a system manual - is to be a "Catalogue of driving tasks (Category B)", in which the demand standards for the practical driving test are described in the form of situation-related driving tasks and situation-independent observation categories, as a means to specify the criteria for event-oriented performance assessment and overall competence evaluation. At the same time, criteria for the examiner's test decision are to be defined. This optimisation work will contribute, finally, to further development of the adaptive control strategy for the practical driving test. To enable implementation of the further developed demand, assessment and documentation standards of an optimised practical driving test, a contextual and methodical concept for an electronic test report is to be presented, together with an ergonomically founded design proposal for both hardware and software. The computer-assisted documentation of test performance is intended to support the driving test examiner in planning of the course of a driving test and assessment of the candidate's driving behaviour. Furthermore, optimisation of the performance feedback to candidates and improved possibilities for scientific evaluation of the optimised practical driving test are expected. With regard to test evaluation, a fundamental model is to be described, which - alongside monitoring of the psychometric quality criteria within the framework of an instrumental evaluation - incorporates an evaluation of test results, product audits and the responses to candidate and driving instructor surveys. Finally, the possible influence of driver assistance and accident avoidance systems on the realisation of a driving test and on the assessment of test performance is to be discussed.
High demands on exhaust emissions of passenger cars and light commercial vehicles require complex technologies. The three-way catalytic converter is an essential part of state of the art emission control systems. If a catalytic converter is damaged or its effectiveness deteriorates, it can be replaced by a replacement converter. Replacement catalytic converters from the aftermarket are approved on the basis of Regulation No 103 of the UNECE - United Nations Economic Commission for Europe. According to this regulation the replacement catalytic converter shall be designed, constructed and capable of being mounted so as to enable the vehicle to comply with the provisions taken as a basis for its type approval. Furthermore the pollution emissions must be effectively limited throughout the entire normal service life of the vehicle under normal operating conditions. In the context of the research project, the durability of replacement catalytic converters was examined. A VW Golf with emission standard Euro 4, 1.4 l petrol engine (55 kW) was selected as a test vehicle. At the start of the examinations, the vehicle showed a mileage of 75,000 km. The selected vehicle was regularly serviced in accordance with the manufacturer's specifications. No emission-relevant faults were recorded by the OBD system. The initial control measurement of the vehicle in as-delivered condition with the originally installed catalytic converter showed that the corresponding emissions of the regulated pollutants were considerably below the Euro 4 emission limits to be applied. Subsequently, an original replacement catalytic converter, which was purchased from an authorised dealer, and 4 catalytic converters purchased in the independent aftermarket, were examined. The replacement catalytic converters were conditioned according to the specifications of ECE Regulation No 103 and then measured in new condition. The catalytic converters were then aged on a burner test rig. Here a total mileage of 80,000 km was simulated. After 10,000 km and 40,000 km, the ageing was interrupted and the exhaust gas emissions of the test vehicle with the aged catalytic converters were measured. The examination was ended as soon as a limit value had been exceeded. The results of the project indicate that with the replacement systems for the after-treatment of exhaust gases available in the independent aftermarket, considerable quality differences can occur. At the end of the ageing over a distance of 80,000 km only the original replacement catalytic converter and one replacement catalytic converter from the independent aftermarket complied with the Euro 4 emission limits. With one replacement catalytic converter, the Euro 4 emission limits were already exceeded in new condition. With another replacement catalytic converter, the examination was aborted after 10,000 km ageing and with a further catalytic converter after 40,000 km ageing due to the Euro 4 emission limits being exceeded. The ECE Regulation No 103 provides for a test of durability of such systems over 80,000 km, but also alternatively enables the use of fixed deterioration factors. In practice, the durability of the replacement systems for the after-treatment of exhaust gases is guaranteed by their manufacturers. However, replacement catalytic converters are rarely inspected as part of the approval. In-use compliance provisions for replacement systems for the after-treatment of exhaust gases are not mentioned in the corresponding specifications. The results of this study indicate that the requirements in the ECE Regulation No 103 are not adequate to ensure the durability of replacement catalytic converters.
Injury severity of e.g. pedestrians or bikers after crashes with cars that are reversing is almost unknown. However, crash victims of these injuries can frequently be seen in emergency departments and account for a large amount of patients every year. The objective of this study is to analyze injury severity of patients that were crashed into by reversing cars. The Hannover Medical School local accident research unit prospectively documented 43,000 road traffic accidents including 234 crashes involving reversing cars. Injury severity including the abbreviated injury scale (AIS) and the maximum abbreviated injury scale (MAIS) was analyzed as well as the location of the accident. As a result 234 accidents were included into this study. Pedestrians were injured in 141 crashes followed by 70 accidents involving bikers. The mean age of all crash victims was 57 -± 23 years. Most injuries took place on straight stretches (n = 81) as well as parking areas (n = 59), entries (n = 36) or crossroads (n = 24). The AIS of the lower extremities was highest followed by the upper extremities. The AIS of the neck was lowest. The mean MAIS was 1.3 -± 0.6. The paper concludes that the lower extremities show the highest risk to become injured during accidents with reversing cars. However, the risk of severe injuries is likely low.
Detailed anthropometric data of pregnant women have been collected and used in the development of a computational model of the pregnant occupant model "Expecting". The model is complete with a finite element uterus and multi-body fetus, which is a novel feature in the models of this kind. The computational pregnant occupant model has been validated and used to simulate a range of impacts. The strains developed in the utero-placental interface are used as the main criteria for fetus safety. Stress distributions due to inertial loading of the fetus on the utero-placental interface play a role on the strain levels. Inclusion of fetus model is shown to significantly affect the strain levels in the utero-placental interface. This series of studies has led to the design of seatbelt features specifically for the pregnant women to enable them use the seatbelt correctly and comfortably.