Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (31)
- Buch (Monographie) (28)
- Bericht (1)
- Arbeitspapier (1)
Volltext vorhanden
- ja (61) (entfernen)
Schlagworte
- Vehicle (61) (entfernen)
Institut
- Sonstige (61)
- Abteilung Fahrzeugtechnik (1)
In a first step, we have examined approximately 23 000 single vehicle accidents within the Austrian National Statistics database. In a second step, we considered 15% of all fatal "running off the road" accidents that occurred in Austria in 2003. As a result, two accident categories were specified; "leaving the road without preceding manoeuvre" and "leaving the road with preceding manoeuvre". These two categories can be basically characterised by the vehicle- heading angle and its velocity angle. In this report, we further suggest theoretical approaches for the dimensioning of a safety zone, an area adjacent to the road free of fixed objects or dangerous slopes. We also show the link between the two accident categories mentioned above and the real world accidents analysed in detail. These observations also form the basis for the required length for safety devices. Finally, we summarise accident avoidance strategies.
Empirical vehicle crashworthiness studies are usually based on national or in-depth traffic accident surveys: Data on accident-involved cars/drivers are analysed in order to quantify the chance of driver injury and to assess certain risk factors like car make and model. As the cars/drivers involved in the same accident form a "cluster", where the size of the cluster equals the number of accident-involved parties, traffic accident survey data are typical multi-level data with accidents as first-level or primary and cars/drivers as secondlevel or secondary units (car occupants in general are to be considered as third level units). Consequently, appropriate statistical multi-level models are to be used for driver injury risk estimation purposes as these models properly account for the cluster structure of traffic accident survey data. In recent years various types of regression models for clustered data have been developed in the statistical sciences. This paper presents multi-level statistical models, which are generally applicable for vehicle crashworthiness assessment in the sense that data on single and multiple car crashes can be analysed simultaneously. As a special case of multi-level modelling driver injury risk estimation based on paired-by-collision car/driver data is considered. It is demonstrated that assessment results may be seriously biased, if the cluster structure inherent in traffic accident survey data is erroneously ignored in the data analysis stage.
Electronic Stability Program (ESP) aims to prevent the lateral instability of a vehicle. Linked to the braking and powertrain systems, it prevents the car from running wide on a corner or the rear from sliding out. It also helps the driver control his trajectory, without replacing him, in the case of loss of control where the driver is performing an emergency manoeuvrer (confused and exaggerated steering wheel actions). A new ESP function optimizes ESP action in curves with hard under steering (situations in which the front wheels lose grip and the vehicle slides towards the outside of the curve). A complementary feature prevents the wheels from spinning when pulling away and accelerating. The name given to the ESP system varies according to the vehicle manufacturer, but other terms include: active stability control (ASC), automotive stability management system (ASMS), dynamic stability control (DSC), vehicle dynamic control (VDC), vehicle stability control (VSC) or electronic stability Control (ESC). This paper proposes an evaluation of the effectiveness of ESP in terms of reduction of injur accidents in France. The method consists of 3 steps: - The identification, in the French National injury accident census (Gendarmerie Nationale only), of accident-involved cars for which the determination of whether or not the car was fitted with ESP is possible. A sample of 1 356 cars involved in injury accidents occurred in 2000, 2001, 2002 and 2003 was then selected. But we had to restrict the analysis to only 588 Renault Lagunas. - The identification of accident situations for which we can determine whether or not ESP is pertinent (for example ESP is pertinent for loss of control accidents whilst it is not for cars pulling out of a junction). - The calculation, via a logistic regression, of the relative risk of being involved in an ESPpertinent accident for ESP equipped cars versus unequipped cars, divided by the relative risk of being involved in a non ESP-pertinent accident for ESP equipped cars versus unequipped cars. This relative risk is assumed to be the best estimator of ESP effectiveness. The arguments for such a method, effectiveness indicator and implicit hypothesis are presented and discussed in the paper. Based on a few assumptions, ESP is proved to be highly effective. Currently, the relative risk of being involved in an ESP pertinent accident for ESP-equipped cars is lower (-44%, although not statistically significant)rnthan for other cars.rn
Rollover scenarios in Europe
(2005)
Rollover accidents seem to be a rising problem in Europe and therefore the systematic of this accident scenario should be investigated. Based on statistical investigations on major European accident databases for different countries a series of 73 real world rollover accidents was analysed. These cases were reconstructed using PC-Crash and preliminary categorised using a modified USbased rollover classification. In a first step, the rollover events were reconstructed from the point of conflict to the vehicle- rest position. The vehicles kinematics as well as its linear and rotational velocities were derived. In a second step typical velocity characteristics as well as kinematics were identified and the events categorised according to these criteria. Based on these results four main categories were defined, covering all reconstructed accidents. This categorisation was based on mechanical parameters (rotatory and translator kinematical data of the vehicle). Significant differences can be seen for different scenarios for the "first phase of rollover".
This paper describes the methodology of In-Depth Investigation in Germany on the example of GIDAS (German In-Depth Accident Study). Since 1999 in Germany a joint project between FAT (Forschungsvereinigung Automobiltechnik or Automotive Industry Research Association) and BASt (Bundesanstalt für Straßenwesen or the Federal Road Research Institute) is being carried out in Hannover and Dresden. The methodology of this project is based on a statistically orientated procedure of data sampling (sampling plan, weighting factors). The paper describes the possibilities of such in-depth investigation on the results of the offered title. The accident cases were collected randomly within GIDAS at Hannover. There are more cases existing from previous investigation started in 1985 under the same methodology. The portion of rollovers can be established at 3.7% of all accidents with casualties in the year 2000. For the study 434 cases of car accidents with rollovers are used for a detail comprehensive analysis. The accidents happened in the years 1994 to 2000 in the Hannover area. The injury distribution will report about 741 occupants with rollover accident event. The presented paper will give an overview of the accident situations following in rollover movements of cars. The distributions of injury frequencies, injury severity AIS for the whole body and for the body regions of occupants will be presented and compared to technical details like the impact speed and the deformation pattern. The speed of the car was determined at the point of rollover and on the point of accident initiency. The characteristics of the kinematics followed in a rollover movement are analyzed and the major defined types of rollover will be shown in the paper. The paper will describe the possibilities of In-Depth Investigation methods for the approach of finding countermeasures on the example of car accidents with rollover and explaining the biomechanics of injuries in rollover movements.
This paper set out to examine the possibilities for injury avoidance implications for older drivers in crashes, based on crash and injury patterns among older drivers and current trends in ageing in most western societies. A number of safety technologies were identified and discussed which have potential for improving vehicle older driver crash avoidance and crashworthiness. While there were some promising estimates available of the likely benefits of this technology for improving safety, it is evident that they need to be confirmed for older drivers, given their age-related disabilities and sensory limitations. Further research is urgently required to ensure that these technologies yield safety benefits without any disbenefits for older drivers.rn
This report gives an overview of pedestrian accidents on Japanese roads. Database used for the analysis is national traffic accident data based on police reports. Relevant measures and background information ranging from vehicle safety, engineering and education are briefly reviewed, and area for further improvement is discussed.rn
In order to improve the protection of children transported in cars, within the CHILD programme (GR3D-CT2002-00791) real world road accidents are thoroughly analysed and then reconstructed in laboratory. Prior to comparing injury severities of real victims to physical parameter values measured on the dummies, the quality of the reconstructions is evaluated by experts who use their experience based on the investigation of numerous and various accidents. This paper presents a new tool aiming at better evaluating and validating accident reconstructions. It is based on statistical evaluation of vehicle deformations which gives weighing factors for every part of the car body structure finally leading to a specific Reconstruction Quality Score (RQS indicator). Furthermore, the reliability of this score, depending on the number of measured points, can be established. This tool includes a function aiming at adjusting the speed for a further reconstruction and at defining the launching speed and the pulse shape for complementary sled tests. Finally, the functions of the RQS software and database are presented.
Data concerning accidents involving personal injury which have been collected in the context of in-depth investigations on scene in the Hannover area since 1973 and in the Dresden area since 1999 represent an important basis for empirical traffic safety research. At national and international level various analyses and comparisons are carried out on the basis of "in-depth data" from the above mentioned investigations. In-depth data play a decisive role e.g. within the validation of EuroNCAP results on secondary safety (crashworthiness) of individual passenger car models. Thus, statistically sound methods of data analysis and population parameter estimation are of high importance. Since the 1st of August 1984 the "in-depth investigations on scene" in the Hannover area have been carried out according to a sampling plan developed by HAUTZINGER in the context of a research project on behalf of BASt. In the meantime a second region of in-depth investigation on scene was added with surveys in Dresden and the surrounding area. Internationally, the acronym GIDAS (German In-Depth Accident Study) is commonly used for the two above mentioned surveys. The objective of a current research project (topic of this contribution) is, among other things, to examine and adjust the previous weighting and expansion method for the two regional accident investigations to the current general conditions.
In-depth road traffic accident research in Spain is a fairly recent activity. In the past, only accident data that had been retrospectively processed by the national and regional traffic police forces was available. In 1999 Applus+IDIADA set up a permanent accident research unit to carry out indepth analysis of road accidents in Spain. Since then accidents involving cars, motorcycles, coaches and vulnerable road users have been thoroughly studied. The Applus+IDIADA accident research team has carried out work for the various traffic polices in Spain and it is currently involved in several research projects in which accidentology is one of the main tasks. The working methodology of the team is presented in the first part of the paper. In the framework of the European research project "Rollover" (GRD2-2001-50086), Applus+IDIADA has collected data, inspected scenarios and performed virtual reconstructions of twenty-six of the total seventy-six rollover accidents studied. The second half of the paper describes how these accident investigations were used to develop a test procedure for identifying possible improvements to the vehicle structure which augment occupant protection in a rollover scenario. In particular, a proposal for a new drop test for rollover assessment is presented. The cases were analysed for severity, in terms of injury to the occupants and damage to the vehicle, and taking into account whether a seatbelt was worn or not. The worst possible cases were identified as those that had severe occupant injuries and sizable damage to the occupant compartment when seatbelts had been worn. The most severe cases were then analysed further for impact position (roll and pitch angles) and the impact velocity. With these parameters taken into account, the most representative combinations could be found. This resulted in a series of configurations for possible drop tests. The results of the tests indicate where passenger vehicle structures need to be improved in order to increase occupant safety in the event of a rollover crash.
Sedan type vehicles in which adult rear seat passengers were present and which were involved in frontal collisions were investigated, and the influence of unbelted rear seat passengers on the injuries of front seat occupants was studied. Unbelted rear seat passengers move forward during impact. It was observed that there were not only cases in which front seat occupants sustained injuries caused by direct contact with rear seat passengers, but also cases where front seat occupants received severe injuries due to additional force from rear seat passengers, either impacting directly or indirectly as a result of deformation of the front seat. Severe injuries of front seat occupants were observed in the latter cases. This research validates the importance of seat-belt use for rear seat passengers, not only to protect themselves but also to mitigate injuries of front seat occupants.
Interaction of road environment, vehicle and human factors in the causation of pedestrian accidents
(2005)
The UK On-the-Spot project (OTS) completed over 1500 in-depth investigations of road accidents during 2000-2003 and is continuing for a further 3 years. Cases were sampled from two regions of England using rotating shifts to cover all days of the week and all hours of the day and night. Research teams were dispatched to accidents notified to police during the shifts; arrival time to the scene of the accident was generally less than 20 minutes. The methodology of OTS includes sophisticated systems for describing accident causation and the interaction of road, vehicle and human factors. The purpose of this paper is to describe and illustrate these systems by reference to pedestrian accidents. This type of analysis is intended to provide an insight into how and why pedestrian accidents occur in order to assist the development of effective road, vehicle and behavioural countermeasures.
The European Union has set a target to reduce all road fatalities (over 40,000) with 50% in 2010. This target percentage remained unchanged with the introduction of the ten new member states within the EU as by May 1st, 2004. According to Eurostat, 34% of all fatalities in 1998 in the, then, fifteen states of the European Union were the result of single vehicle collisions. This represents over 14,000 lives lost each year of which many can likely be saved through better roadside infrastructure design. The challenge for road safety professionals is to find methods and design strategies that help to reduce these casualties. Procedures for full-scale vehicle crash testing of guard rails were first published in the US in 1962. Present European regulation is mainly based on these procedures and later developments. Since then the vehicle fleet has changed considerably. Due to the complexity of the actual safety problem the numerical simulation approach offers a good opportunity to evaluate the different parameters involved in road safety, such as infrastructure properties, vehicle type, vehicle occupants and injuries. The ideal situation would be that simulation tools are coupled or integrated and all involved effects would be related. At the moment this is not the case yet, but initiatives are taken and a new virtual era has started. This paper offers a method looking at two components that encompass the driving environment: the car and the guardrail. As part of the EC-funded project, RISER (Roadside Infrastructure for Safer European Roads) a multi body simulation program study is carried out to determine sensitivities of some parameters in car to guardrail collisions and gives insides in performance of the car with passive safety equipment, the guardrail and the interaction of these objects with each other. By offering a set of methods that includes these two aspects and their intertwining relations, more confidence can be gained in actually reducing fatalities due to single vehicle collisions with, or due to, roadside furniture. Reducing the number of fatalities of single vehicle crashes would contribute greatly to the stated goal of reducing casualties altogether.
In recent years the boundaries between active and passive safety blurred more and more. Passive safety in the traditional term includes all safety aspects to prevent occupants to be injured or at least injury severity should be reduced. Passive Safety starts with the collision (first vehicle contact) and ends with rescue (open vehicle doors). Within this phase the occupant has to be protected by the passenger compartment whereby no intrusion should occur. Active safety on the other side was developed to interact prior to the collision whereby the goal is to prevent accidents. The extensive interaction between active and passive safety led to the terminologies "Primary" and "Secondary" safety whereas the expression Integrated Safety Concept was generated. Within this study the most well documented single vehicle accidents with cars not equipped with ESP were identified from the PENDANT database and reconstructed. Additional cases were found in the database ZEDATU of TU Graz. In comparison each case was simulated with the assumption that the cars were equipped with ESP. The differences regarding accident avoidance or crash severity as well as reduction of injury risk were analysed.
Description of road traffic related knee injuries in published investigations is very heterogeneous. The purpose of this study was to estimate the risk of knee injuries in real world car impacts in Germany focusing vulnerable road users (pedestrians, bicyclists and motorcyclists) and restrained car drivers. The accident research unit analyses technical and medical data collected shortly after the accident at scene. Two different periods (years 1985-1993 and 1995-2003) were compared focusing on knee injuries (Abbreviated Injury Scale (AISKnee) 2/3). In order to determine the influences type of collision, direction and speed as well as the injury pattern and different injury scores (AIS, MAIS, ISS) were examined. 1.794 pedestrians, 742 motorcyclists, 2.728 bicyclists and 1.116 car drivers were extracted. 2% had serious ligamentous or bony injuries in relation to all injured. The risk of injury is higher for twowheelers than for pedestrians, but knee injury severity is higher for the latter group. Overall the current knee injury risk is low and significant reduced comparing both time periods (27%, p<0,0001). Severe injuries (AISKnee 2/3) were below 1%). Improved aerodynamic design of car fronts reduced the risk for severe knee injuries significantly (p=0,0015). Highest risk of injury is for motorcycle followed by pedestrians, respectively. Knee protectors could prevent injuries by reducing local forces. The classically described dashboard injury was rarely identified. The overall injury risk for knee injuries in road traffic is lower than estimated and reduced comparing both periods. The aerodynamic shape of current cars compared to older types reduced the incidence and severity of knee injuries. Further modification and optimization of the interior and exterior design could be a proper measurement. Classic described injury mechanisms were rarely identified. It seems that the AIS is still underestimating extremity injuries and their long term results.
Die Lastübertragung von den Fahrzeugrädern auf die Fahrbahntafel wird beschrieben, und es wird eine Übersicht der ermüdungsempfindlichen Schweissnahtbereiche von Deckblech, Längssteifen und Querträgern gegeben. Die charakteristischen Schwachpunkte der Schweissverbindungen werden in Skizzen dargestellt.
Neben der zunehmenden Bedeutung der aktiven Sicherheit bleiben Maßnahmen der passiven Sicherheit bei der Entwicklung moderner Kraftfahrzeuge unabdingbar. Die Weiterentwicklung von Maßnahmen zum passiven Fußgängerschutz war zunächst größtenteils durch Verbraucherschutztests wie zum Beispiel Euro NCAP oder JNCAP getrieben und ist nun auch durch gesetzliche Regelungen verpflichtend geworden. Im vorangegangenen Forschungsprojekt der BASt FE 82.229/2002 Schutz von Fußgängern beim Scheibenaufprall ist die Grundlage eines modularen Prüfverfahrens für den Kopfaufprall im Bereich der Windschutzscheibe, bestehend aus einem Versuchs- und einem Simulationsteil, erarbeitet worden. Im Rahmen dieses Projektes wurde ein hybrides Testverfahren bestehend aus Versuch und Simulation ausgearbeitet, das den Bereich der Windschutzscheibe und dabei auch crashaktive Systeme wie Airbags berücksichtigt. Das Testverfahren kombiniert Komponentenversuche mit einem Simulationsteil, in dem Fahrzeug-Fußgänger-Simulationen und lmpaktorsimulationen durchgeführt werden. Zusätzliche Dummyversuche dienten zur Bewertung des Testverfahrens. Alle erarbeiteten virtuellen und realen Testmethoden wurden an einem Referenzfahrzeug (Opel Signum), welches repräsentativ für eine durchschnittliche Mittelklasselimousine steht, durchgeführt. Das Fahrzeug wurde mit einem Airbagsystem ausgerüstet und der Testprozedur mit und ohne diesem System vergleichend unterzogen. Innerhalb dieser Untersuchungen konnte gezeigt werden, dass neue Testmethoden unter Ausnutzung von Simulationen und Komponententests es erlauben, realistischere Versuchsbedingungen unter Berücksichtigung von potenziellen Kopfaufprallpositionen und -zeiten zu definieren. Dabei können sehr gute Übereinstimmungen zwischen Fußgängersimulation und Dummyversuch erreicht werden. Die Randbedingungen für den Kopfaufprall und die Aufprallzeit wurden durch den Einsatz von Fußgängermodellen ermittelt. Weiterhin ermöglichen die Simulationen, zusätzliche Einflussdaten wie Vektoren mit den Kopfaufprallgeschwindigkeiten und -winkeln zu bestimmen.
Auf Basis von Immissionsmessdaten an 8 Straßenabschnitten wurde die Wirkung von potenziellen PM10-Minderungsmaßnahmen (Temporeduzierung, Verbesserung des Verkehrsflusses, Verbesserung des Fahrbahnzustandes) beziehungsweise der Einfluss meteorologischer Parameter auf die PM10-Konzentrationen beziehungsweise -Emissionen untersucht. Der Einfluss eines normgerechten Ausbaus einer innerstädtischen Bundesstraße mit Einrichtung einer "Grünen Welle" auf die PMx-Belastungen konnte im Feldversuch an der Bergstraße in Dresden untersucht werden. Dabei konnte nachgewiesen werden, dass sich der Verkehrsfluss nach dem Ausbau in beiden Richtungen deutlich verbessert hat. Stadtauswärts war vor dem Ausbau ein mäßiger Verkehrsfluss (Verkehrssituation nach Handbuch für Emissionsfaktoren = LSA2), stadteinwärts ein schlechter Verkehrsfluss zu verzeichnen gewesen. Nach dem Ausbau funktioniert stadtauswärts die Grüne Welle (HVS2), stadteinwärts gibt es Haltezeiten an den Lichtsignalanlagen, die den Verkehrsfluss im Allgemeinen nur gering beeinträchtigen (HVS2, LSA2). Die mittleren Fahrzeuggeschwindigkeiten lagen im Bereich der Messstelle vor dem Ausbau bei circa 30 km/h und nach dem Ausbau bei über 40 km/h. Es konnte eine PM10-Reduktion durch Verbesserung des Verkehrsflusses (Grüne Welle) trotz höherer Fahrzeuggeschwindigkeiten von circa 3pg/m3 (circa 35 Prozent der PM10-Zusatzbelastung) abgeleitet werden. Umfangreiche Datenauswertungen konnten für die B10 bei Karlsruhe, die Merseburger Straße in Halle und den Jagtvej in Kopenhagen in Verbindung mit jeweils repräsentativen Hintergrundmessstellen durchgeführt werden. Es konnten erwartungsgemäß deutliche Abhängigkeiten der PM10- und PM2.5-Konzentrationen von meteorologischen Parametern beobachtet werden. Dabei gibt es aber auch eine Vielzahl von Korrelationen der meteorologischen Kenngrößen untereinander, sodass aus der tendenziellen Abhängigkeit der Partikelbelastung von einer meteorologischen Kenngröße unmittelbar nicht auf dessen Ursache/Wirkungsbeziehung geschlossen werden kann. Die stärksten meteorologischen Einflüsse auf die PM10-Gesamtbelastungen gehen von den vertikalen Austauschbedingungen, von der Anzahl niederschlagsloser Tage seit dem letzten Niederschlagsereignis und der Windgeschwindigkeit aus. Die stärksten meteorologischen Einflüsse auf die PM10-Zusatzbelastungen gehen von der Windgeschwindigkeit und -richtung sowie von den Temperaturen aus. Bei den PM10-Emissionsfaktoren zeichnet sich zum Beispiel an der Merseburger Straße für die Werktage mit Niederschlag im Mittel ein circa 30 Prozent geringerer Wert ab als an den trockenen Werktagen. Diese Abnahme ist signifikant. Die PM10-Emissionsfaktoren an den ersten drei trockenen Tagen nach einem Niederschlagsereignis sind gleich, zeigen also keine Zunahme mit andauernder Trockenheit. Bei den PM2.5-Emissionen ist dieser Minderungseffekt durch Niederschlag nicht zu verzeichnen. Eine Bindung des Staubes im Straßenraum bei hoher Luftfeuchtigkeit konnte nicht festgestellt werden. Während die PM2.5-Emissionsfaktoren (weitestgehend Motoremissionen) unabhängig von der Jahreszeit sind, nimmt die Emission der Partikelfraktion PM2.5 bis PM10 im Winterhalbjahr deutlich (über 100 Prozent) zu. Ursachen könnten das Einbringen von Streugut und vermehrte Schmutzeinträge auf der Straße sein. Im Winterhalbjahr sind auch die PM10-Emissionsfaktoren, wie erwartet, von den Austauschbedingungen unabhängig und liegen jeweils deutlich (Faktor zwei) höher als im Sommerhalbjahr. Dieser Anstieg der PM10-Emissionen unter winterlichen Bedingungen könnte auch erklären, warum die PM10-Emissionsfaktoren im Unterschied zu PM2.5 bei niedrigen Tagesmitteltemperaturen deutlich höher sind als bei hohen Temperaturen. Der hohe Anstieg der PM10-Konzentrationen während (winterlicher) austauscharmer Inversionswetterlagen könnte somit sowohl von den schlechten Austauschbedingungen als auch von deutlich höheren nicht motorbedingten PM10-Emissionen beeinflusst sein. Derzeit laufen in parallelen Forschungsprojekten weitere Arbeiten, um den Erkenntnisstand bei der PM10-Emissionsmodellierung beziehungsweise bei der Bewertung von Minderungsmaßnahmen zu erhöhen. Es sollte einer separaten Auswertung vorbehalten sein, aus all diesen neuen Forschungsprojekten die Schlussfolgerungen für die zukünftige PM10-Modellierung zu ziehen.
Neuere empirische Studien und ausländische Erfahrungen zeigen, dass durch eine Risikodifferenzierung in der Kfz-Haftpflichtversicherung Anreize zur Verbesserung der Verkehrssicherheit gesetzt werden können. Ansatzpunkte hierfür bestehen vor allem darin, - das verkehrsgefährdende Verhalten und nicht erst den Unfall mit Prämienzuschlägen zu sanktionieren, - unmittelbar den verantwortlichen Fahrer mit dem Bonus zu belohnen beziehungsweise mit dem Malus zu bestrafen und - nicht nur den Unfall, sondern auch die Unfallschwere im Malus zu berücksichtigen. In diesem Gutachten werden die Möglichkeiten geprüft, die Ausgestaltung der Prämiendifferenzierung in der Kfz-Haftpflichtversicherung verstärkt zur Verbesserung der Verkehrssicherheit einzusetzen. Dazu wird auf der Grundlage einer theoretischen und empirischen Bestandsaufnahme der Prämiendifferenzierung in der Kfz-Haftpflichtversicherung untersucht, ob und wie Prämienzuschläge an die Auffälligkeit im Verkehrszentralregister (VZR) geknüpft werden können. Empirische Analysen zeigen, dass mit Hilfe der Eintragungen im Verkehrszentralregister eine gute Vorhersage über ein zukünftig erhöhtes individuelles Verkehrsrisiko getroffen werden kann. Im Begleitprojekt des Kraftfahrtbundesamtes zu dieser Studie, das in der Schriftenreihe der Bundesanstalt für Straßenwesen als Heft M 159 gleichfalls veröffentlicht ist, zeigen sich dabei enorme Unterschiede der individuellen Risikodisposition, die den Faktor 10 oder gar 20 deutlich übersteigen. Dort wird auch gezeigt, dass mit der Kombination der drei Risikomerkmale Geschlecht, Alter und Anzahl der VZR-Eintragungen eine umfassende Risikodifferenzierung erreicht werden kann. Eine gute Risikodifferenzierung wäre in der Kfz-Haftpflichtversicherung also ohne "Tarifdschungel" auf der Basis einfach überprüfbarer Tarifmerkmale prospektiv möglich. Der Gesetzgeber kann ein VZR-punktebasiertes Modell der Prämiendifferenzierung aus europarechtlichen Gründen nicht vorschreiben. Die Versicherer können aber ein solches Modell auf freiwilliger Basis ohne Weiteres einführen. Den Anforderungen des Bundesverwaltungsgerichtes nach einer willkürfreien Differenzierung der Prämien würden alle hier diskutierten Modelle genügen. Als auf Freiwilligkeit basierendes System der Prämiendifferenzierung verletzt es auch weder das Recht auf informelle Selbstbestimmung, noch das Datenschutzrecht. Das punktebasierte Modell der Risikodifferenzierung erweist sich damit als wirksam und praktikabel. Ob es sich tatsächlich am deutschen Markt durchsetzt, hängt von der Bereitschaft der Versicherungsunternehmen ab, ein solches Modell zu erproben. Einfache Modelle, wie der hier entwickelte Regeltreuerabatt, könnten als erster Schritt im Wettbewerb zu einem Sogeffekt für andere Versicherer führen und damit eine sukzessive Verfeinerung der verhaltensbezogenen Risikodifferenzierung in der Kfz-Haftpflicht einleiten.
Aufgabenstellung und Zielsetzung des von der Bundesanstalt für Straßenwesen (BASt) im Oktober 2001 in Auftrag gegebenen Forschungsprojektes war es, auf der Grundlage einer systematischen Analyse vorhandener Materialien, einer Grundlagenerhebung über Erwartungen und Erfahrungen von mobilitätseingeschränkten und behinderten Menschen in der Fahrausbildung sowie der Durchführung und Auswertung von vier Expertendiskussionen, einen Überblick zu dem Gesamtkomplex "Mobilität von Menschen mit einer Behinderung bzw. Einschränkung" zu erarbeiten. Das Projekt hatte eine Laufzeit von 1 1/2 Jahren. Die einzelnen Kapitel des vorliegenden Projektberichts beleuchten unterschiedliche Aspekte der Themen "Fahrausbildung von Personen mit eingeschränkter Mobilität", "Mobilitätseingeschränkte und Kraftfahrzeug" sowie "Mobilitätseingeschränkte und Straßenverkehr", die damit zu einem Gesamtüberblick zusammengeführt wurden. Kapitel 1 beschreibt die Aufgabenstellung und die einzelnen Projektschritte. Der Literaturbericht in Kapitel 2 skizziert die Themenschwerpunkte der Fachdiskussion anhand exemplarischer Veröffentlichungen. Dabei werden einerseits Publikationen beschrieben, die sich themenübergreifend dem Gesamtkomplex nähern. Andererseits werden Veröffentlichungen vorgestellt, die sich mit spezifischen Fragestellungen aus der medizinischen Perspektive, hinsichtlich der Begutachtung oder rechtlicher Aspekte, der Unfallbeteiligung im Straßenverkehr, der Fahrausbildung und der Fahrzeug-und Umrüsttechnik beschäftigen. Kapitel 3 beschreibt die in der Praxis der Fahrausbildung am häufigsten auftretenden Einschränkungs- bzw. Behinderungsarten und deren Auswirkungen auf die Mobilität, Fahreignung und Fahrausbildung. Kapitel 4 gibt einen Überblick zur Fahrzeug- und Umrüsttechnik für die Fahrausbildung Mobilitätseingeschränkter. Eine Zusammenstellung, Erläuterung und kritische Bewertung der gesetzlichen Grundlagen für Fahrerlaubnisbewerber und -bewerberinnen bzw. Fahrerlaubnisinhaber und -inhaberinnen mit einer Einschränkung oder Behinderung findet sich in Kapitel 5. In Kapitel 6 und 7 werden die Ergebnisse einer Fragebogenerhebung unter ehemaligen Fahrschülern und Fahrschülerinnen mit einer Mobilitätseinschränkung und die Ergebnisse aus vertiefenden Interviews mit mobilitätseingeschränkten Fahrern und Fahrerinnen dargestellt. Kapitel 6 fokussiert dabei auf Erwartungen und Erfahrungen Mobilitätseingeschränkter auf dem Weg zur und in der Fahrausbildung. Kapitel beschreibt die Erwartungen und Erfahrungen Mobilitätseingeschränkter nach dem Erwerb bzw. der Umschreibung einer Fahrerlaubnis. In Kapitel 8 werden die in den durchgeführten Expertenrunden angesprochenen Themen und Problempunkte auf dem Weg zur oder in der Fahrausbildung Mobilitätseingeschränkter sowie die in den Gesprächsrunden diskutierten und erarbeiteten Lösungsansätze und Verbesserungsvorschläge dargestellt. Kapitel 9 beschreibt und bewertet die derzeit gültigen Bestimmungen zum sonstigen Fahrzeug Krankenfahrstuhl. Der vorliegende Bericht schließt mit einer kurzen Zusammenfassung wesentlicher Projektergebnisse in Kapitel 10. Der Originalbericht enthält als Anhänge die Kurzbeschreibungen der Personen, mit denen vertiefende Interviews geführt wurden, eine Liste medizinischer Kriterien, zusätzliche Auswertungen in Tabellenform sowie eine Übersicht "Schritte zum Führerschein" im Falle körperlicher Einschränkungen. Auf die Wiedergabe dieser Anhänge wurde in der vorliegenden Veröffentlichung verzichtet. Sie liegen bei der Bundesanstalt für Straßenwesen vor und sind dort einsehbar. Verweise auf diese Anhänge im Berichtstext wurden zur Information des Lesers beigehalten.