Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
Sprache
- Englisch (74) (entfernen)
Volltext vorhanden
- nein (74) (entfernen)
Schlagworte
- Bewertung (20)
- Evaluation (assessment) (19)
- Safety (18)
- Sicherheit (18)
- Anfahrversuch (16)
- Conference (16)
- Konferenz (16)
- Prüfverfahren (16)
- Test method (16)
- Impact test (veh) (15)
- Injury (15)
- Verletzung (15)
- Accident (13)
- Dummy (13)
- Unfall (13)
- Anthropometric dummy (12)
- Fußgänger (12)
- Pedestrian (12)
- Simulation (11)
- Collision (10)
- Europa (10)
- Europe (10)
- Deutschland (9)
- Driver assistance system (9)
- Frontalzusammenstoß (9)
- Germany (9)
- Head on collision (9)
- Zusammenstoß (9)
- Analyse (math) (8)
- Analysis (math) (8)
- Biomechanics (8)
- Biomechanik (8)
- Fahrerassistenzsystem (8)
- Fahrzeug (7)
- Radfahrer (7)
- Schweregrad (Unfall (7)
- Verletzung) (7)
- injury) (7)
- Cyclist (6)
- Head (6)
- Kopf (6)
- Messung (6)
- Schweregrad (Unfall, Verletzung) (6)
- Severity (accid, injury) (6)
- Vehicle (6)
- Car (5)
- Child (5)
- Datenbank (5)
- Driver (5)
- Fahrer (5)
- Kind (5)
- Knee (human) (5)
- Measurement (5)
- Passive safety system (5)
- Passives Sicherheitssystem (5)
- Risikobewertung (5)
- Risk assessment (5)
- Severity (accid (5)
- Standardisierung (5)
- Standardization (5)
- Transport infrastructure (5)
- Tunnel (5)
- Accident prevention (4)
- Alte Leute (4)
- Autobahn (4)
- Brustkorb (4)
- Compatibility (4)
- Deformation (4)
- Fatality (4)
- Impact test (4)
- Improvement (4)
- Insasse (4)
- Knie (menschl) (4)
- Kompatibilität (4)
- Leg (human) (4)
- Motorway (4)
- Reproducibility (4)
- Reproduzierbarkeit (4)
- Research project (4)
- Seitlicher Zusammenstoß (4)
- Side impact (4)
- Test (4)
- Thorax (4)
- Tödlicher Unfall (4)
- Unfallverhütung (4)
- Vehicle occupant (4)
- Verbesserung (4)
- Verkehrsinfrastruktur (4)
- Versuch (4)
- Autonomes Fahren (3)
- Autonomous driving (3)
- Behaviour (3)
- Bein (menschl) (3)
- Bemessung (3)
- Benutzung (3)
- Braking (3)
- Bremsung (3)
- Deformable barrier (impact test) (3)
- Deformierbare Barriere (Anpralltest) (3)
- Design (overall design) (3)
- Fahrzeuginnenraum (3)
- Forschungsarbeit (3)
- Gefahrenabwehr (3)
- Gesetzgebung (3)
- Hospital (3)
- Interior (veh) (3)
- Krankenhaus (3)
- Legislation (3)
- Modification (3)
- Motorcyclist (3)
- Motorradfahrer (3)
- Old people (3)
- Pkw (3)
- Security (3)
- Statistics (3)
- Statistik (3)
- Use (3)
- Verformung (3)
- Verhalten (3)
- Veränderung (3)
- Abdomen (2)
- Active safety system (2)
- Air pollution (2)
- Airbag (2)
- Aktives Sicherheitssystem (2)
- Anti locking device (2)
- Attitude (psychol) (2)
- Aufprallschlitten (2)
- Automatic (2)
- Automatisch (2)
- Autonomes Fahrzeug (2)
- Autonomous vehicle (2)
- Belastung (2)
- Boden (2)
- Cervical vertebrae (2)
- Classification (2)
- Climate change (2)
- Cost benefit analysis (2)
- Crash Test (2)
- Data acquisition (2)
- Data bank (2)
- Database (2)
- Datenerfassung (2)
- Dauerhaftigkeit (2)
- Detection (2)
- Detektion (2)
- Development (2)
- Driver information (2)
- Driving (veh) (2)
- Durability (2)
- Einstellung (psychol) (2)
- Electric vehicle (2)
- Elektrofahrzeug (2)
- Entwicklung (2)
- Error (2)
- Fahrerinformation (2)
- Fahrstabilität (2)
- Fahrzeugführung (2)
- Fahrzeugsitz (2)
- Fehler (2)
- Fire (2)
- Front (2)
- Halswirbel (2)
- Highway design (2)
- Human body (2)
- Impact sled (2)
- Intelligent transport system (2)
- International (2)
- Klassifizierung (2)
- Klimawandel (2)
- Landstraße (2)
- Load (2)
- Luftverunreinigung (2)
- Mathematical model (2)
- Medical aspects (2)
- Medizinische Gesichtspunkte (2)
- Menschlicher Körper (2)
- Method (2)
- Motorcycle (2)
- Motorrad (2)
- Norm (tech) (2)
- On the spot accident investigation (2)
- Rechenmodell (2)
- Road network (2)
- Rural road (2)
- Safety belt (2)
- Seat (veh) (2)
- Severity (acid (2)
- Sicherheitsgurt (2)
- Soil (2)
- Specification (standard) (2)
- Spinal column (2)
- Straßenentwurf (2)
- Straßennetz (2)
- Straßenverkehrsrecht (2)
- Surfacing (2)
- Technologie (2)
- Technology (2)
- Traffic regulations (2)
- USA (2)
- Unterleib (2)
- Untersuchung am Unfallort (2)
- Vehicle handling (2)
- Wirbelsäule (2)
- Wirtschaftlichkeitsrechnung (2)
- (menschl) (1)
- Abfluss (1)
- Absorption (1)
- Accident rate (1)
- Active safety (1)
- Adult (1)
- Aged people (1)
- Air bag (restraint system) (1)
- Air quality management (1)
- Air transport (1)
- Aktive Sicherheit (1)
- Angle (1)
- Anthropmetric dummy (1)
- Antiblockiereinrichtung (1)
- Antiblockiersystem (1)
- Apparatus (measuring) (1)
- Arzneimittel (1)
- Asphaltstraße (Oberbau) (1)
- Auffahrunfall (1)
- Ausrüstung (1)
- Bau (1)
- Bearing capacity (1)
- Bein (1)
- Bicyclist (1)
- Brand (1)
- Bridge (1)
- Bridge management system (1)
- Brücke (1)
- Brücken Management System (1)
- Cadaver (1)
- Calibration (1)
- Camera (1)
- Carriageway (1)
- Cause (1)
- Chassis (1)
- Clay (1)
- Communication (1)
- Condition survey (1)
- Construction (1)
- Correlation (1)
- Crashtest (1)
- Critical path method (1)
- Damage (1)
- Data base (1)
- Data processing (1)
- Datenverarbeitung (1)
- Decision process (1)
- Decke (Straße) (1)
- Decke [Straße] (1)
- Deicing (1)
- Delivery vehicle (1)
- Demand (econ) (1)
- Demografie (1)
- Demography (1)
- Deterioration (1)
- Diagnostik (1)
- Diffusion (1)
- Digitale Bildverarbeitung (1)
- Dispersion (stat) (1)
- Driving aptitude (1)
- Droge (1)
- Drugs (1)
- Drunkenness (1)
- EU (1)
- Earthworks (1)
- Echtzeit (1)
- Education (1)
- Efficiency (1)
- Eichung (1)
- Electronic stability program (1)
- Elektronisches Stabilitätsprogramm (1)
- Emergency (1)
- Empfindlichkeit (1)
- Enteisung (1)
- Entscheidungsprozess (1)
- Environment (1)
- Environment protection (1)
- Equipment (1)
- Erdarbeiten (1)
- Erste Hilfe (1)
- Erwachsener (1)
- Erziehung (1)
- Evaluation (Assessment) (1)
- Expert system (1)
- Expertensystem (1)
- Fahrassistenzsystem (1)
- Fahrbahn (1)
- Fahrleistung (1)
- Fahrstreifen (1)
- Fahrtauglichkeit (1)
- Fahrwerk (1)
- Fein (mater) (1)
- Feinstaub (1)
- Fernverkehrsstrasse (1)
- Feuer (1)
- Fine (mater) (1)
- Finite element method (1)
- First aid (1)
- Flexible pavement (1)
- Flooding (1)
- Foot (not a measure) (1)
- Frau (1)
- Fugenfüllung (1)
- Fuß (1)
- Fußgängerbereich (1)
- Geomembran (1)
- Geomembrane (1)
- Geschwindigkeit (1)
- Gewicht (1)
- Greenhouse effect (1)
- Griffigkeit (1)
- Ground water (1)
- Grundwasser (1)
- Haftung (jur) (1)
- Head (human) (1)
- Heavy metal (1)
- Height (1)
- Höhe (1)
- Hüfte (menschl) (1)
- Image processing (1)
- Impact study (1)
- Incident detection (1)
- Incident management (1)
- Information (1)
- Intelligentes Transportsystem (1)
- Intelligentes Verkehrssystem (1)
- Interface (1)
- Intersection (1)
- Interview (1)
- Jahreszeit (1)
- Kamera (1)
- Kleintransporter (1)
- Knie (1)
- Knotenpunkt (1)
- Kommunikation (1)
- Kopf (menschl) (1)
- Korn (1)
- Kornverteilung (1)
- Korrelation(Math (1)
- Kraftfahrzeug (1)
- Layer (1)
- Learning (1)
- Lebenszyklus (1)
- Leichnam (1)
- Leistungsfähigkeit (allg) (1)
- Lernen (1)
- Level of service (1)
- Liability (1)
- Luftreinhaltung (1)
- Lufttransport (1)
- Main road (1)
- Market (1)
- Markt (1)
- Materialveraenderung (allg) (1)
- Medical examination (1)
- Medication (1)
- Medizinische Untersuchung (1)
- Merging (1)
- Messgerät (1)
- Mesurement (1)
- Methode der finiten Elemente (1)
- Motorisierungsgrad (1)
- Nachfrage (1)
- Network (traffic) (1)
- Netzplantechnik (1)
- Neural network (1)
- Neuronales Netz (1)
- Nitric acid (1)
- Non destructive testing (1)
- Notfall (1)
- Oberfläche (1)
- Overlapping (1)
- PVC (1)
- Particle (1)
- Particle size distribution (1)
- Particulate matter (1)
- Peat (1)
- Pedestrian precinct (1)
- Pelvis (1)
- Pfahl (1)
- Pile (1)
- Planning (1)
- Planung (1)
- Policy (1)
- Politik (1)
- Pollutant (1)
- Polyvinylchloride (1)
- Preloading (soil) (1)
- Prevention (1)
- Probability (1)
- Prototyp (1)
- Prototype (1)
- Prüefverfahren (1)
- Public transport (1)
- Rain (1)
- Real-time (1)
- Rear end collision (1)
- Reconstruction (accid) (1)
- Regen (1)
- Regional planning (1)
- Regionalplanung (1)
- Richtlinien (1)
- Risiko (1)
- Risikoverhalten (1)
- Risk (1)
- Risk taking (1)
- Road (1)
- Road user (1)
- Robot (1)
- Roboter (1)
- Run off (1)
- Sachschaden (1)
- Safety fence (1)
- Salpetersäure (1)
- Schadstoff (1)
- Schicht (1)
- Schnittstelle (1)
- Schutz (1)
- Schutzeinrichtung (1)
- Schwermetall (1)
- Sealing compound (1)
- Season (1)
- Seite (1)
- Sensitivity (1)
- Sensor (1)
- Service life (1)
- Settlement (1)
- Setzung (1)
- Side (1)
- Skidding resistance (1)
- Social factors (1)
- Soziale Faktoren (1)
- Spain (1)
- Spanien (1)
- Specifications (1)
- Speed (1)
- Stadtplanung (1)
- Stand der Technik (Bericht) (1)
- Standardabweichung (1)
- Stat) (1)
- State of the art report (1)
- Straße (1)
- Stress (psychol) (1)
- Störfallentdeckung (1)
- Störfallmanagement (1)
- Subsoil (1)
- Surface (1)
- Technische Vorschriften (Kraftfahrzeug) (1)
- Test procedure (1)
- Ton (Gestein) (1)
- Torf (1)
- Town planning (1)
- Traffic (1)
- Traffic lane (1)
- Traffic restraint (1)
- Tragfähigkeit (1)
- Transport mode (1)
- Treibhauseffekt (1)
- Trunkenheit (1)
- Umwelt (1)
- Umweltschutz (1)
- Unfallhäufigkeit (1)
- Unfallrekonstruktion (1)
- United Kindom (1)
- Untergrund (1)
- Ursache (1)
- Vehicle mile (1)
- Vehicle ownership (1)
- Vehicle regulations (1)
- Vereinigtes Königreich (1)
- Verfahren (1)
- Verfahren ; Verkehrsinfrastruktur (1)
- Verhütung (1)
- Verkehr (1)
- Verkehrsbeschränkung (1)
- Verkehrsmittel (1)
- Verkehrsnetz (1)
- Verkehrsqualität (1)
- Verkehrsteilnehmer (1)
- Verkehrsverflechtung (1)
- Virtual reality (1)
- Virtuelle Realität (1)
- Vorbelastung (Boden) (1)
- Vorn (1)
- Vorne (1)
- Wahrscheinlichkeit (1)
- Weather (1)
- Weight (1)
- Windschutzscheibe (1)
- Windscreen (veh) (1)
- Winkel (1)
- Wirkungsanalyse (1)
- Witterung (1)
- Woman (1)
- Zerstörungsfreie Prüfung (1)
- Zusammenstoss (1)
- Zustandsbewertung (1)
- Öffentlicher Verkehr (1)
- Überdeckung (1)
- Überschwemmung (1)
This thesis gives a detailed picture of how planners, politicians, residents and transport engineers in three societies, Britain, Germany and the United States reacted to one of the most powerful inventions of the late nineteenth century, the motor car. Misjudgments of the potential growth of motor vehicle ownership and its adverse effects had serious repercussions in the coming decades, primarily in the dense urban areas. Disturbing has been the underestimation of the importance of public transport as a real alternative to the motor car in urban areas, first by the United States and even several decades later by Britain. Of the three countries, only Germany seems to have struck a better balance. Not surprisingly, already at the beginning of the twentieth century, conflicts occurred between the weaker road participants (pedestrians and cyclists), the existing urban fabric and the motor vehicle. A more comprehensive comparison between Britain and Germany shows that both countries developed specific patterns and had different attitudes towards road transport. Far more has been invested and planned in Germany whereas Britain has shown not so much a lack of foresight in planning but 'in investment in road transport. This major difference has had very visible effects an today's urban structure and transport situation. The demand for restraint of motor traffic had different motives in the two countries, and is not such a new idea as is often assumed. While in Germany even in the 1920s and 30s the protection of historic inheritance was a decisive motive, in Britain that was not the case. Questions of traffic restraint were however raised in connection with road safety and later in the 60s as a means of improving the urban environment. The turning point of nearly unlimited promotion of car use in urban areas took place in Germany during the 60s and 70s, whereas the Buchanan Report had already warned in the early 60s against the adverse effects cars could have in urban areas if they were not controlled. Although even in Britain the report was misunderstood and largely not put into practice, the wave of protest against road building occurred earlier there than in Germany. As a whole, Britain has shown a brillance of ideas in restraining motor vehicles which was lacking in the Federal Republic. At the beginning of the 70s, discussions started seriously in Germany an traffic calming concepts which were slowly transformed into reality, Britain seems to have followed these examples, but with a considerable time lag.
An approach to the standardization of accident and injury registration systems (STAIRS) in Europe
(1998)
STAIRS is a European Commission funded study whose aim is to produce a set of guidelines for a harmonised, crash injury database. The need to evaluate the effectiveness of the forthcoming European Union front and side impact directives has emphasised the need for real world crash injury data-sets that can be representative of the crash population throughout Europe. STAIRS will provide a methodology to achieve this. The ultimate aim of STAIRS is to produce a set of data collection tools which will aid decision making on vehicle crashworthiness as well as providing a means to evaluate the effectiveness of safety regulations. This paper will disseminate the up-to-date findings of the group as they try to harmonise their methods. The stage has been reached where studies into the diverse methods of the UK, French and German systems of crash injury investigation have been undertaken. An assessment has already been made of the relationships between the three current systems in order to define the areas of agreement and divergence. The conclusions reached stated that there were many areas that are already closely related and that the differences were only at the detailed level. With the emphasis on secondary safety and injury causation, core data sets were decided upon, taking into account: vehicle description, collision configuration, structural response of vehicles, restraint and airbag performance, child restraint performance, Euro NCAP, pedestrian and vehicle occupant kinematics, injury description and causation. Each variable was studied objectively, the important elements isolated and developed into a form that all partners were agreeable on. A glossary of terms is being developed as the project progresses which includes ISO standards and other definitions from the associated CAREPLUS project, which addresses the comparability of national data sets. A major consideration of the group was the data collection method to be employed. The strengths and weaknesses of each study were investigated to obtain a clear idea of which aspects offered the best way forward. The quality of this information and transference into a common format, as well as the necessary error checking systems to be employed have just been completed and are described. In tandem with this area of study the problem of the statistical relationship of each sample to the national population is also being investigated. The study proposes a mechanism to use a sample of crash injury data to represent the national and international crash injury problem
A means of assessing the passive safety of automobiles is a desirable instrument for legislative bodies, the automobile industry, and the consumer. As opposed to the dominating motor vehicle assessment criteria, such as engine power, spaciousness, aerodynamics and consumption, there are no clear and generally accepted criteria for assessing the passive safety of cars. The proposed method of assessment combines the results of experimental safety tests, carried out according to existing legally prescribed or currently discussed testing conditions, and a biomechanical validation of the loading values determined in the test. This evaluation is carried out with the aid of risk functions which are specified for individual parts of the body by correlating the results of accident analysis with those obtained by computer simulation. The degree of conformance to the respective protection criterion thus deduced is then weighted with factors which take into account the frequency of occurrence and the severity of the accident on the basis of resulting costs. Each of the test series includes at least two frontal and one lateral crash test against a deformable barrier. The computer-aided analysis and evaluation of the simulation results enables a vehicle-specific overall safety index as well as partial and individual safety values to be determined and plotted graphically. The passive safety provided by the respective vehicle under test can be defined for specific seating positions, special types of accident, or for individual endangered parts of the body.
Side-impact safety of passenger cars is assessed in Europe in a full-scale test using a moving barrier. The front of this barrier is deformable and represents the stiffness of an 'average' car. The EU Directive 96/27/EC on side impact protection has adopted the EEVC Side Impact Test Procedure, including the original performance specification for the barrier face when impacting a flat dynamometric rigid wall. The requirements of the deformable barrier face, as laid down in the Directive, are related to geometrical characteristics, deformation characteristics and energy dissipation figures. Due to these limited requirements, many variations are possible in designing a deformable barrier face. As a result, several barrier face designs are in the market. However, research institutes and car manufacturers report significant difference in test results when using these different devices. It appears that the present approval test is not able to distinguish between the different designs that may perform differently when they impact real vehicles. Therefore, EEVC Working Group 13 has developed a number of tests to evaluate the different designs. In these tests the barrier faces are loaded and deformed in a specific and/or more representative way. Barrier faces of different design have been evaluated. In the paper the set-up and the reasoning behind the tests is presented. Results showing specific differences in performance are demonstrated.
This paper provides an overview of the research work of the European Enhanced Vehicle-safety Committee (EEVC) in the field of crash compatibility between passenger cars. Since July 1997 the EC Commission is partly funding the research work of EEVC. The running period of this project will be two years. The progress of five working packages of this research project is presented: Literature review, Accident analysis, Structural survey of cars, Crash testing, and Mathematical modelling. According to the planned time schedule the progress of research work is different for the five working packages.
The first stage of the work has been to collate information on bridge assessment from the participating countries. In the later stages, the aim is to provide guidelines that reflect the current best practices, a methodology that will allow for future development and sufficient flexibility to accommodate variations in national priorities as the process of harmonisation is pursued. The following tasks fall within the scope of the project: (1) a review of current procedures and standards used for bridge assessment in Europe; (2) the development of models for taking into account the bridge specific traffic conditions and material properties; (3) the use of reliability methods based on a probabilistic approach for bridge assessment including the use of measurements for updating the reliability of structural elements; and (4) the provision of recommendations for methods and procedures that can be adopted for the assessment module of the management framework highlighting where further development will be beneficial.
Despite the steadily declining number of pedestrian fatalities and injuries in most European countries during recent decades, pedestrian protection is still of great importance in the European Union as well as in Germany. This is because they still constitute a large proportion of road user casualties and are more likely to suffer serious and fatal injuries than most other road users. In 1999 only car occupants suffered more fatal injuries than pedestrians in Germany. In December 1998, EEVC WG 17 completed their review and updating of the EEVC WG 10 pedestrian test procedure that made it possible to evaluate the protection afforded to pedestrians by the front of passenger cars in an accident. Within the scope of this procedure, four different impactors are used representing those parts of the body which are injured very often and/or very seriously in vehicle-pedestrian-collisions. In a project executed by IKA and BASt, a small family car was tested according to the EEVC WG 17 test procedure. Afterwards modifications to the car were carried out in order to improve the pedestrian protection provided by the vehicle design. There were certain restrictions placed on the level of modifications undertaken, e.g. only minor modifications to vehicle styling and to the vehicle structures, which provide passenger protection. The redesigned vehicle was tested again using the WG 17 test procedure. The test results of the modified vehicle were compared with those of the standard vehicle and evaluated. The results show that considered measures for pedestrian protection in many areas of the vehicle front structure and the use of innovative techniques can lead to a significant reduction of the loads of pedestrians at an acceptable expense.
The Swedish National Road Administration (SNRA), the Japanese Automobile Research Institute (JARI) and the Federal Highway Research Institute (BASt) are co-operating in the International Harmonized Research Activities on Intelligent Transportation Systems (IHRA-ITS). Under this umbrella a joint study was conducted. The overall objective of this study was to contribute to the definition and validation of a "battery of tools" which enables a prediction and an assessment of changes in driver workload due to the use of in-vehicle information systems (IVIS) while driving. In this sense \"validation\" means to produce empirical evidence from which it can be concluded that these methods reliably discriminate between IVIS which differ in terms of relevant features of the HMI-design. Additionally these methods should also be sensitive to the task demands imposed on the driver by the traffic situation and their interactions with HMI-design. To achieve these goals experimental validation studies (on-road and in the simulator) were performed in Sweden, Germany and Japan. As a common element these studies focused on the secondary task methodology as an approach to the study of driver workload. In a joint German-Swedish on-road study the Peripheral Detection Task (PDT) was assessed with respect to its sensitivity to the complexity of traffic situations and effects of different types of navigation systems. Results show that the PDT performance of both the German and the Swedish subjects reflects the task demands of the traffic situations better than those of the IVIS. However, alternative explanations are possible which will be examined by further analyses. Results of this study are supplemented by the Japanese study where informational demands induced by various traffic situations were analysed by using a simple arithmetic task as a secondary task. Results of this study show that relatively large task demands can be expected even from simple traffic situations.
The frontal crash is still an important contributor to deaths and serious injured resulting from road accidents in Europe. As the Hybrid-III dummy used in crash tests is over two decades old, the European Enhanced Vehicle-safety Committee is studying the potential for a new test device. Key is the availability of a well-defined set of requirements that identifies the minimum level of biofidelity required for an advanced frontal dummy. In this paper, a complete set of frontal impact biofidelity requirements, consisting of references , description of test conditions and corridors, is presented.
When the EEVC proposed the full-scale side impact test procedure, it recommended that consideration should be given to an interior headform test in addition. This was to evaluate areas of contact not assessed by the dummy. EEVC Working Group 13 has been researching the parameters of a possible European headform test procedure in four phases. Earlier stages of the research have been presented at previous ESV conferences. The conclusions from these have suggested that the US free motion headform should be used in any European test procedure and that it should be a free flight test, not guided. This research has now culminated in proposals for a European test procedure. This paper presents the proposed EEVC side impact interior headform test procedure, giving the rationale for the test and the first results from the validation phase of the test protocol.
Federal highway A 26 in Germany : reinforced dams in soft soils - control method according DIN 1054
(2004)
In 2001 the construction of the Federal Highway A 26 in Lower Saxony (north of Germany) was started. In this area the underground is without any substantial bearing capacity as it consists of soft layers ( clay, peat) with a thickness of up to 12 m. Because it was not possible to exchange the soil neither completely nor partially pre-loading procedure (consolidation method) was chosen for this construction. Short- and long-term stability are ensured by the use of high-tensile fabrics for reinforcement at the dam basis. The vertical and horizontal deformations and the stress changes in the soil, caused by the pre-load procedure, has to be controlled by special geotechnical measurements. Additionally, in the higher parts of the dam the strain behaviour of the high-tensile fabrics is measured. These measurements form the basis for the application of the control method according DIN 1054. In this article, the special circumstances of this project are described. Further on the geotechnical measurements, the winning and evaluation of the necessary parameters of the subsoil, and the consequences of these data for the ongoing of the project are laid down. Intermediate results of the geotechnical measurements are described.
The European Enhanced Vehicle-safety Committee wants to promote the use of more biofidelic child dummies and biomechanical based tolerance limits in regulatory and consumer testing. This study has investigated the feasibility and potential impact of Q-dummies and new injury criteria for child restraint system assessment in frontal impact. European accident statistics have been reviewed for all ECE-R44 CRS groups. For frontal impact, injury measures are recommended for the head, neck, chest and abdomen. Priority of body segment protection depends on the ECE-R44 group. The Q-dummy family is able to reflect these injuries, because of its biofidelity performance and measurement capabilities for these body segments. Currently, the Q0, Q1, Q1.5, Q3 and Q6 are available representing children of 0, 1, 1.5, 3 and 6 years old. These Q-dummies cover almost all dummy weight groups as defined in ECE-R44. Q10, representing a 10 year-old child, is under development. New child dummy injury criteria are under discussion in EEVC WG12. Therefore, the ECE-R44 criteria are assessed by comparing the existing P-dummies and new Q-dummies in ECE-R44 frontal impact sled tests. In total 300 tests covering 30 CRSs of almost all existing child seat categories are performed by 11 European organizations. From this benchmark study, it is concluded that the performance of the Q-dummy family is good with respect to repeatability of the measurement signals and the durability of the dummies. Applying ECE-R44 criteria, the first impression is that results for P- and Q-dummy are similar. For child seat evaluation the potential merits of the Q-dummy family lie in the extra measurement possibilities of these dummies and in the more biofidelic response.
At the 2005 ESV conference, the International Harmonisation of Research Activities (IHRA) side impact working group proposed a 4 part draft test procedure, to form the basis of harmonisation of regulation world-wide and to help advances in car occupant protection. This paper presents the work performed by a European Commission 6th framework project, called APROSYS, an further development and evaluation of the proposed procedure from a European perspective. The 4 parts of the proposed procedure are: - A Mobile Deformable Barrier test; - An oblique Pole side impact test; - Interior headform tests; - Side Out of Position (OOP) tests. Full scale test and modelling work to develop the Advanced European Mobile Deformable Barrier (AE-MDB) further is described, resulting in a recommendation to revise the barrier face to include a bumper beam element. An evaluation of oblique and perpendicular pole tests was made from tests and numerical simulations using ES-2 and WorldSID 50th percentile dummies. It was concluded that an oblique pole test is feasible but that a perpendicular test would be preferable for Europe. The interior headform test protocol was evaluated to assess its repeatability and reproducibility and to solve issues such as the head impact angle and limitation zones. Recommendations for updates to the test protocol are made. Out-of-position (OOP) tests applicable for the European situation were performed, which included additional tests with Child Restraint Systems (CRS) which use is mandatory in Europe. It was concluded that the proposed IHRA OOP tests do cover the worst case situations, but the current test protocol is not ready for regulatory use.
The use of proper child restraint systems (CRS) is mandatory for children travelling in cars in most countries of the world. The analysis of the quantity of restrained children shows that more than 90% of the children in Germany are restrained. Looking at the quality of the protection, a large discrepancy between restrained and well protected children can be seen. Two out of three children in Germany are not properly restrained. In addition, considerable difference exists with respect to the technical performance of CRS. For that reason investigations and optimisations on two different topics are necessary: The technical improvement of CRS and the ease of use of CRS. Consideration of the knowledge gained by the comparison of different CRS in crash tests would lead to some improvements of the CRS. But improvement of child safety is not only a technical issue. People should use CRS in the correct way. Misuse and incorrect handling could lead to less safety than correct usage of a poor CRS. For that reason new technical issues are necessary to improve the child safety AND the ease of use. Only the combination of both parts can significantly increase child safety. For the assessment of the safety level of common CRS, frontal and lateral sled tests simulating different severity levels were conducted comparing pairs of CRS which were felt to be good and CRS which were felt to be poor. The safety of some CRS is currently at a high level. All well known products were not damaged in the performed tests. The performance of non-branded CRS was mostly worse than that of the well known products. Although the branded child restraint systems already show a high safety level it is still possible to further improve their technical performance as demonstrated with a baby shell and a harness type CRS.
A legform impactor with biofidelic characteristics (FlexPLI) which is being developed by the Japanese Automobile Research Institute (JARI) is being considered as a test tool for legislation within a proposed Global Technical Regulation on pedestrian protection (UNECE, 2006) and therefore being evaluated by the Technical Evaluation Group (TEG) of GRSP. In previous built levels it already showed good test results on real cars as well as under idealised test conditions but also revealed further need for improvement. A research study at the Federal Highway Research Institute (BASt) deals with the question on how leg injury risks of modern car fronts can be revealed, reflected and assessed by the FlexPLI and how the impactor can be used and implemented as a legislative instrument for the type approval of cars according to current and future legislations on pedestrian protection. The latest impactor built level (GTα ) is being evaluated by a general review and assessment of the certification procedure, the knee joint biofidelity and the currently proposed injury criteria. Furthermore, the usability, robustness and durability as a test tool for legislation is examined and an assessment of leg injuries is made by a series of tests with the FlexPLI on real cars with modern car front shapes as well as under idealised test conditions. Finally, a comparison is made between the FlexPLI and the current european legislation tool, the legform impactor according to EEVC WG 17.
The PDB, BASt and Opel conducted two test series to evaluate possible effects on the results obtained using the EEVC WG17 Lower Legform Impactor as a test tool for the assessment of pedestrian safety. The reproducibility and repeatability of the test results were assessed using six legform impactors while keeping the test parameters constant. In the second series one impactor was used and the test parameters were varied to assess the effects on the readings of the legform. The test parameters were velocity, temperature, relative humidity, the point of first contact regarding the deviation in z-direction and the deviations of the pitch, roll and yaw angle. The tests were performed using an inverse setup, i.e. the legform was hit by a guided linear impactor equipped with a honeycomb deformation element. This setup was chosen to be able to vary each single parameter while avoiding variations of the other test parameters at the same time. The test parameters were varied stronger than allowed in regulatory use in order to determine possible dependencies between the parameters and the readings which were acceleration, bending angle and shear displacement.
Powered Two Wheelers (PTWs) accidents constitute one of the road safety problems in Europe. PTWs fatalities represent 22% at EU level in 2006, having increased during last years, representing an opposite trend compared to other road users" figures. In order to reduce these figures it is necessary to investigate the accident causation mechanisms from different points of view (e.g.: human factor, vehicle characteristics, influence of the environment, type of accident). SAFERIDER project ("Advanced telematics for enhancing the SAFEty and comfort of motorcycle RIDERs", under the European Commission "7th Framework Program") has investigated PTW accident mechanisms through literature review and statistical analyses of National and In-depth accident databases; detecting and describing all the possible PTW's accident configurations where the implementation of ADAS (Advanced Driver Assistance Systems) and IVIS (In-Vehicle Information Systems) could contribute to avoid an accident or mitigate its severity. DIANA, the Spanish in-depth database developed by CIDAUT, has been analyzed for that purpose. DIANA comprises of accident investigation teams, in close cooperation with police forces, medical services, forensic surgeons, garages and scrap yards. An important innovation is the fact that before injured people arrive to hospitals, photographs and explanations about the possible accident injury mechanisms are sent to the respective hospitals (via 3G GPRS technology). By this, additional information to medical staff can be provided in order to predict in advance possible internal injuries and select the best medical treatment. This methodology is presented in this paper. On the other hand, the main results (corresponding to road, rider and PTW characteristics; pre and post-accident manoeuvres; road layout; rider behaviour; impact points; accident causations;...) from the analyses of the PTW accidents used for SAFERIDER are shown. Only accident types relevant to ADAS and IVIS devices have been considered.
Since its beginning in 1999, the German In-Depth Accident Study (GIDAS) evolved into the presumably leading representative road traffic accident investigation in Europe, based on the work started in Hanover in 1973. The detailed and comprehensive description of traffic accidents forms an essential basis for vehicle safety research. Due to the ongoing extension of demands of researchers, there is a continuous progress in the techniques and systematic of accident investigation within GIDAS. This paper presents some of the most important developments over the last years. Primary vehicle safety systems are expected to have a significant and increasing influence on reducing accidents. GIDAS therefore began to include and collect active safety parameters as new variables from the year 2005 onwards. This will facilitate to assess the impact of present and future active safety measures. A new system to analyse causation factors of traffic accidents, called ACASS, was implemented in GIDAS in the year 2008. The whole process of data handling was optimised. Since 2005 the on-scene data acquisition is completely conducted with mobile tablet PCs. Comprehensive plausibility checks assure a high data quality. Multi-language codebooks are automatically generated from the database structure itself and interfaces ensure the connection to various database management systems. Members of the consortium can download database and codebook, and synchronize half a terabyte of photographic documentation through a secured online access. With the introduction of the AIS 2005 in the year 2006, some medical categorizations have been revised. To ensure the correct assignment of AIS codes to specific injuries an application based on a diagnostic dictionary was developed. Furthermore a coding tool for the AO classification was introduced. All these enhancements enable GIDAS to be up to date for future research questions.
In the last years there has been a decline in accident figures in Germany especially for four wheeled vehicles. At the same time, accident figures for motorcycles remained nearly constant. About 17 % of road traffic fatalities in the year 2006 were motorcyclists. 33 % of these riders were killed in single vehicle crashes. This leads to the conclusion that improving driving dynamics and driving stability of powered two wheelers would yield considerable safety gains. However, the well-known measures for cars and trucks with their proven effectiveness cannot be transferred easily to motorcycles. Therefore studies were carried out to examine the safety potential of Anti Lock Braking Systems (ABS) and Vehicle Stability Control (VSC) for motorcycles by means of accident analysis, driving tests and economical as well as technical assessment of the systems. With regard to ABS, test persons were assigned braking tasks (straight and in-curve) with five different brake systems with and without ABS. Stopping distances as well as stress and strain on the riders were measured for 9 test riders who completed 105 braking manoeuvres each. Knowing the ability of ABS to avoid falls during braking in advance of a crash and taking into account the system costs, a cost benefit analysis for ABS for motorcycles was carried out for different market penetration of ABS, i.e. equipment rates, and different time horizons. The potential of VSC for motorcycles was estimated in two steps. First the kinds of accidents that could be prevented by such a system at all have been analysed. For these accident configurations, simulations and driving tests were then performed to determine if a VSC was able to detect the critical driving situation and if it was technically possible to implement an actuator which would help to stabilise the critical situation.
Within the process of integrating passenger airbags in the vehicle fleet a problem of compatibility between the passenger airbag and rear-facing child restraint systems was recognised. Especially in the US several accidents with children killed by the passenger airbag were recorded. Taking into account these accidents the deactivation of a present passenger airbag is mandatory if a child is carried in a rear-facing child restraint system at the front passenger seat in all member states of the European Union. This rule is in force since the deadline of 2003/20/EC at the latest. In the past a passenger airbag either could not be disabled or could only be disabled by a garage. Today there are a lot of different possibilities for the car driver himself to disable the airbag. Solutions like an on/off-switch or the automatic detection of a child restraint system are mentioned as an example. Taking into account the need for the deactivation of front passenger airbags two types of misuse can occur: transportation of an infant while the airbag is (still) enabled and transportation of an adult, while the airbag is disabled, respectively. Within a research project funded by BASt both options of misuse were analysed utilising two different types of surveys amongst users (field observations and interviews, Internet-questionnaires). In addition both analysis of accident data and crash tests for an updated assessment of the injury risk caused by the front passenger airbag were conducted. Both surveys indicate a low risk of misuse. Most of the misuse cases were observed in older cars, which offer no easy way to disable the airbag. For systems, which detect a child seat automatically, no misuse could be found. The majority of misuses in cars equipped with a manual switch were caused by reasons of oblivion. Also the accident analysis indicates a minor risk of misuse. From more than 300 cases of the GIDAS accident sample that were analysed, only 24 children were using the front passenger seat in cars equipped with a front passenger airbag. In most of these cases the airbag was deactivated. When misuse occurred the injury severity was low. However, when analysing German single accidents the fatality risk caused by the front passenger airbag became obvious. From the technical point of view, there were important changes in the design of passenger airbags in recent years. Not only volume and shape were modified, but also the mounting position of the entire airbag module was changed fundamentally. Even if these findings do not allow obtaining general conclusions, a clear tendency of less danger by airbags could be identified. For future vehicle development a safe combination of airbags and rear faced baby seats seems to be possible in the long term. This would mean that both types of misuse could be eliminated. For parents an easier use of child seat and car would be the result.