Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
- Buch (Monographie) (370)
- Konferenzveröffentlichung (142)
- Bericht (15)
- Arbeitspapier (7)
Volltext vorhanden
- ja (534) (entfernen)
Schlagworte
- Deutschland (534) (entfernen)
Institut
- Sonstige (534) (entfernen)
For more than a decade, ADAC accident researchers have analysed road accidents with severe injuries, recording some 20,000 accidents. An important task in accident research is to determine the causative factors of road accidents. Apart from vehicle engineering and human factors, accident research also focuses on infrastructural and environmental aspects. To find out what accident scenarios are the most common in ADAC accident research and what driver assistance systems can prevent them, our first task was to conduct a detailed accident analysis. Using CarMaker, we performed a realistic simulation of accident scenarios, including crashes, with varying parameters. To begin with, we made an initial selection of driver assistance systems in order to determine those with the greatest accident prevention potential. One important finding of this study is that the safety potential of the individual driver assistance systems can actually be examined. It also turned out that active safety offers even much more potential for development and innovation than passive safety. At the same time, testing becomes more demanding, too, as new systems keep entering the market, many of them differing in functional details. ADAC will continue to test all driver assistance systems as realistically as possible so as to be able to provide advice to car buyers. Therefore, it will be essential to develop and improve test conditions and criteria.
At IAM RoadSmart we share the excitement about autonomous cars " who wouldn't! However over half of the drivers we polled supported concentrating on making drivers safer " among IAM RoadSmart members it was 70%. Driverless cars are still years away but delivering safer drivers can help reduce death and injury from tomorrow. Governments, academics and car makers need to work hard to convince sceptical British and American drivers that autonomous cars can deliver the benefits promised such as a 90% plus reduction in road deaths.
Still correlated with high mortality rates in traffic accidents traumatic aortic ruptures were frequently detected in unprotected car occupants in the early years. This biomechanical analysis investigates the different kinds of injury mechanisms leading to traumatic aortic injuries in todays traffic accidents and how the way of traffic participation affects the frequency of those injuries over the years. Based on GIDAS reported traffic accidents from 1973 to 2014 are analyzed. Results show that traumatic aortic injuries are mainly observed in high-speed accidents with high body deceleration and direct load force to the chest. Mostly chest compression is responsible for the load direction to the cardiac vessels. The main observed load vector is from caudal-ventral and from ventral solely, but also force impact from left and right side and in roll-over events with chest compression lead to traumatic aortic injuries. Classically, the injury appeares at the junction between the well-fixed aortic arch and the pars decendens following a kind of a scoop mechanism, a few cases with a hyperflexion mechanism are also described. In our analysis the deceleration effect alone never led to an aortic rupture. Comparing the past 40 years aortic injuries shift from unprotected car occupants to today's unprotected vulnerable road users like pedestrians, cyclists and motorcyclists. Still the accident characteristics are linked with chest compression force under high speed impact, no seatbelt and direct body impact.
In this study, the mean profile depth (MPD) that expresses roughness of road pavements was calculated using the road survey equipment vehicle and the calculated MPD was compared with the real number of traffic accidents. The analysis method used in this study was to classify the appropriate clustering in relation to traffic accidents using the K-means clustering and to compare this with the presence of traffic accidents via the MPDs to derive the result. K-means clustering was used in the analysis method and four clusters were found using the clustering analysis results. The center of each cluster was 0.627, 0.850, 1.118, and 1.237, respectively. The result of this study is expected to be utilized as foundational research in the traffic safety area.
In der Untersuchung wurde der Einfluss des Schwerverkehrs auf den Verkehrsablauf an planfreien Knotenpunkten analysiert. Als Grundlage dienten Daten von Dauerzählstellen für die Analyse auf makroskopischer Ebene, ergänzt durch Messungen an hochbelasteten Knotenpunkten für eine mikroskopische Analyse des Schwerverkehrs. Für die Untersuchung hoher Schwerverkehrsanteile wurden außerdem Verkehrsflusssimulationen an ausgewählten Knotenpunkten mit dem Programm BABSIM durchgeführt. Makroskopisch wurden die Daten von Dauerzählstellen und aus der Simulation mit den Verfahren des HBS (2015) verglichen und vor allem bezüglich der Umrechnung in Pkw-Einheiten ausgewertet. Dabei zeigte sich, dass die bestehenden Verfahren auch für hohe Schwerverkehrsanteile anwendbar sind, der Einfluss des Schwerverkehrs auf die Kapazität mit dem bislang angesetzten Pkw-Gleichwert von 2,0 aber bei Schwerverkehrsanteilen größer oder gleich 20 % eher überschätzt wird. Weiterhin wurden Regressionsanalysen durchgeführt, die dazu dienten, eine Funktion der für die Einfahrt maßgebenden Belastung des rechten Fahrstreifens zu identifizieren. Diese Funktion diente als Eingangsgröße für die Kalibrierung und Erweiterung eines analytischen Modells, mit dem die Veränderung der Fahrstreifenaufteilung im Bereich von Ein- und Ausfahrten nachgebildet werden kann. Als weiterer Ansatz wurden die Verfahren der stochastischen Kapazitätsanalyse für die Untersuchung von planfreien Knotenpunkten erweitert. Für die Anwendung des Verfahrens ist eine sehr umfangreiche Datengrundlage erforderlich, die nicht immer verfügbar ist. Im Rahmen der mikroskopische Analyse des Schwerverkehrs an planfreien Knotenpunkten wurden empirisch erhobene Einzelfahrzeugdaten hinsichtlich des Fahrstreifenwechselverhaltens der Schwerverkehrsfahrzeuge im Bereich der Knotenpunkte und der Zeitlückenverteilungen in verschiedenen Abständen von der Trenninselspitze analysiert. Mithilfe dieser Auswertungen wurden die um den Aspekt des Schwerverkehrs erweiterten analytischen Modelle kalibriert.
For the avoidance of traffic accidents by means of advanced driver assistance systems the knowledge of failures and deficiencies a few seconds before the crash is of increasing importance. This information e.g. is collected in the German accident survey GIDAS by an interview derived from the ACAS methodology. However to display the whole range of accident causation factors additional information is needed on enduring factors of the system components "human", "infrastructure" and "machine". On the strategic level these accident moderating factors include long term influences such as medical preconditions or a general higher risk taking behavior as well as influences on the immediate conflict level such as an aggressive response to a perceived previous traffic conflict. This study was conducted to examine the feasibility of collecting such causation information in the scope of an in-depth accident investigation like GIDAS. Due to the comprehensive amount of information necessary to estimate the moderating factors the collection of the information is distributed to different methods. 5 cases of real world crashes have been investigated where information was collected on-scene and retrospective by interviews. The identified moderating factors of the accidents and the method for collecting the information are displayed.
The advent of active safety systems calls for the development of appropriate testing methods. These methods aim to assess the effectivity of active safety systems based on criteria such as their capability to avoid accidents or lower impact speeds and thus mitigate the injury severity. For prospective effectivity studies, simulation becomes an important tool that needs valid models not only to simulate driving dynamics and safety systems, but also to resolve the collision mechanics. This paper presents an impact model which is based on solving momentum conservation equations and uses it in an effectivity study of a generic collision mitigation system in reconstructed real accidents at junctions. The model assumes an infinitely short crash duration and computes output parameters such as post-crash velocities, delta-v, force directions, etc. and is applicable for all impact collision configurations such as oblique, excentric collisions. Requiring only very little computational effort, the model is especially useful for effectivity studies where large numbers of simulations are necessary. Validation of the model is done by comparison with results from the widely used reconstruction software PC-Crash. Vehicles involved in the accidents are virtually equipped with a collision mitigation system for junctions using the software X-RATE, and the simulations (referred to as system simulations) are started sufficiently early before the collision occurred. In order to assess the effectivity, the real accident (referred to as baseline) is compared with the system simulations by computing the reduction of the impact speeds and delta-v.
Die Bundesregierung hat zum 01.01.2012 einen deutschlandweiten Feldversuch mit Lang-Lkw gestartet. Die dafür erforderliche verkehrsrechtliche Grundlage wurde durch die LkwÜberlStVAusnV gegeben. Diese Verordnung schreibt u.a. die wissenschaftliche Begleitung des Feldversuches durch die BASt vor. Gründe für den Feldversuch sind u. a. vermutete Auswirkungen durch die Lang-Lkw auf die Verkehrssicherheit, den Verkehrsablauf, die Verkehrsqualität und auf die geometrische Gestaltung der Verkehrsanlagen. In der vorliegenden Untersuchung sollten entwurfstechnische Lösungsansätze für das Parken von Lang-Lkw auf Rastanlagen entwickelt und bewertet werden. Die Untersuchung beschränkt sich auf Rastanlagen im Zuge von Bundesfernstraßen. In den Untersuchungen wurde zwischen den Lang-Lkw bis L = 17,80 m (Typ 1) und den Lang-Lkw bis L = 25,25 m differenziert. Die differenzierte Bewertung beruht auf den Erkenntnissen, dass Typ 1 in Lkw-Parkstände passt. Die größeren Lang-Lkw mit bis zu L = 25,25 m passen nicht in die L = 21,96 m langen Schrägparkstände. Stellvertretend für die längeren Lang-Lkw wurde Typ 2 näher untersucht. Seine Schleppkurve ist vergleichsweise breit und sichert die Befahrbarkeit mit den übrigen Lang-Lkw auf einer Verkehrsanlage. Bei einer schlechten Befahrbarkeit der Verkehrsanlage mit Typ 2 wurde eine differenzierte Betrachtung mit den übrigen Lang-Lkw durchgeführt. Für die Untersuchung wurden verschiedene Fahrversuche durchgeführt, mit denen aber nicht alle Inhalte abgedeckt werden konnten. Aus diesem Grund wurden ergänzend Schleppkurven mit einer Simulationssoftware berechnet. Untersucht wurde auf Rastanlagen die Befahrbarkeit der Fahrgassen, Verzweigungen, Parkstände für Großraum- und Schwertransporte (GST), Schrägparken mit Ummarkierungen, Längsparkstände, telematisches Parken, Umbau von Trenninseln und temporäre Parkstandfreigaben. Die Ergebnisse der Untersuchungen zeigten, dass es kurzfristig möglich ist für Lang-Lkw Parkstände zur Verfügung zu stellen. Auf Längsparkständen können Lang-Lkw ohne bauliche Anpassung parken, wenn ausreichende Lücken vorhanden sind. Auch die temporäre abschnittsweise Freigabe von GST-Parkstreifen ist eine schnell umsetzbare Lösung. Die übrigen Lösungsansätze sind je nach vorhandenen Gegebenheiten auf den Rastanlagen mit mehr oder weniger Aufwand verbunden. Aus baulicher Sicht können Parkmöglichkeiten für Lang-Lkw auch auf bestehenden Rastanlagen umgesetzt werden. Aus rechtlicher Sicht sollte eine eindeutige Verkehrsregelung für die neue Fahrzeugart Lang-Lkw (zwischen Lkw und GST) festgelegt werden. Ein entsprechendes Zusatzzeichen ist dafür auch heute schon möglich. Die Untersuchung hat gezeigt, dass es verschiedene Ansätze zur Verbesserung der Parksituation von Lang-Lkw auf Rastanlagen gibt. Das als Problematik angeführte Parken mit Lang-Lkw ist jedoch als beherrschbar einzustufen, sofern die Anteile der Lang-Lkw am gesamten Straßengüterfernverkehr und der Parkbedarf der Lang-Lkw aufgrund der im Feldversuch beobachteten recht kurzen Fahrtweiten gering bleiben. Der künftige zusätzliche Parkstandbedarf für Lang-Lkw kann nur unter Realisierung solcher Maßnahmen (einzeln oder abgestuft als Maßnahmenkonzept) abgedeckt werden.
In-depth accident investigation offers many advantages for the analysis and comprehension of crash mechanisms. IFSTTAR makes such investigations since 1992 without interruption. The corresponding database contains more than 1200 accident case studies. Currently, in-depth accident investigation is one of the best ways to determine the speed or cars involved in accidents. This paper first presents the methods used for accident investigation and for accident kinematic reconstruction. Then, in order to illustrate the interest and possible applications of such accident data, it shows some results from a recent study based on the IFSTTAR in-depth accident study programme (IDAS) and dealing with the link between travelling speed and accident risk.
Das Handbuch "Barrierefreiheit im Fernbuslinienverkehr" soll helfen, die Attraktivität und den Komfort für alle Reisenden in Fernbussen, mit und ohne Mobilitätseinschränkungen, weiter zu stärken. Im Handbuch werden gesetzlich vorgeschriebene Maßnahmen zur Barrierefreiheit in Fernbussen erläutert sowie weitergehende (optionale) Maßnahmen aufgezeigt. Bei der Erstellung des Handbuchs wirkte die BASt im Projektbetreuerkreis mit und stellte die Fachbetreuer.