Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
- Buch (Monographie) (386)
- Konferenzveröffentlichung (151)
- Bericht (15)
- Wissenschaftlicher Artikel (13)
- Arbeitspapier (7)
- Teil eines Buches (Kapitel) (3)
Schlagworte
- Germany (575) (entfernen)
Das Unfallgeschehen auf Landstraßen weist eine besonders hohe Unfallschwere auf. Zur Reduktion der Längsverkehrsunfälle aufgrund von fehlerhaftem Überholen halten die "Richtlinien für die Anlage von Landstraßen" (RAL 2012) für jede Entwurfsklasse ein Überholprinzip bereit. Dennoch ist das Überholen unter Benutzung des Gegenfahrstreifens auf Straßen der EKL 3 und EKL 2 nicht ausgeschlossen. Deswegen wurde in den RAL eine erforderliche Überholsichtweite von 600 m auf einbahnig zweistreifigen Straßen anhand eines theoretischen Überholmodells festgelegt. Zur Überprüfung und Aktualisierung des derzeit gültigen Überholmodells auf Landstraßen werden im Rahmen dieser Untersuchung vollständige Überholungen im realen Verkehrsgeschehen mit einer Drohne aufgenommen. Die Überholvorgänge werden hinsichtlich ihrer Kenngrößen ausgewertet. Daraus wird ein Modell zur Bestimmung der erforderlichen Überholsichtweite in Abhängigkeit der entwurfstechnischen Randbedingungen abgeleitet. Im Ergebnis werden Empfehlungen eines aktualisierten Überholmodells auf Landstraßen zur Übernahme in die RAL gegeben. Abgeleitet aus den Ergebnissen werden Empfehlungen formuliert, unter welchen Bedingungen das Überholen durch verkehrsrechtliche Maßnahmen unterbunden werden sollte.
Die Bundesregierung hat zum 01.01.2012 einen deutschlandweiten Feldversuch mit Lang-Lkw gestartet. Die dafür erforderliche verkehrsrechtliche Grundlage wurde durch die LkwÜberlStVAusnV gegeben. Diese Verordnung schreibt u.a. die wissenschaftliche Begleitung des Feldversuches durch die BASt vor. Gründe für den Feldversuch sind u. a. vermutete Auswirkungen durch die Lang-Lkw auf die Verkehrssicherheit, den Verkehrsablauf, die Verkehrsqualität und auf die geometrische Gestaltung der Verkehrsanlagen. In der vorliegenden Untersuchung sollten entwurfstechnische Lösungsansätze für das Parken von Lang-Lkw auf Rastanlagen entwickelt und bewertet werden. Die Untersuchung beschränkt sich auf Rastanlagen im Zuge von Bundesfernstraßen. In den Untersuchungen wurde zwischen den Lang-Lkw bis L = 17,80 m (Typ 1) und den Lang-Lkw bis L = 25,25 m differenziert. Die differenzierte Bewertung beruht auf den Erkenntnissen, dass Typ 1 in Lkw-Parkstände passt. Die größeren Lang-Lkw mit bis zu L = 25,25 m passen nicht in die L = 21,96 m langen Schrägparkstände. Stellvertretend für die längeren Lang-Lkw wurde Typ 2 näher untersucht. Seine Schleppkurve ist vergleichsweise breit und sichert die Befahrbarkeit mit den übrigen Lang-Lkw auf einer Verkehrsanlage. Bei einer schlechten Befahrbarkeit der Verkehrsanlage mit Typ 2 wurde eine differenzierte Betrachtung mit den übrigen Lang-Lkw durchgeführt. Für die Untersuchung wurden verschiedene Fahrversuche durchgeführt, mit denen aber nicht alle Inhalte abgedeckt werden konnten. Aus diesem Grund wurden ergänzend Schleppkurven mit einer Simulationssoftware berechnet. Untersucht wurde auf Rastanlagen die Befahrbarkeit der Fahrgassen, Verzweigungen, Parkstände für Großraum- und Schwertransporte (GST), Schrägparken mit Ummarkierungen, Längsparkstände, telematisches Parken, Umbau von Trenninseln und temporäre Parkstandfreigaben. Die Ergebnisse der Untersuchungen zeigten, dass es kurzfristig möglich ist für Lang-Lkw Parkstände zur Verfügung zu stellen. Auf Längsparkständen können Lang-Lkw ohne bauliche Anpassung parken, wenn ausreichende Lücken vorhanden sind. Auch die temporäre abschnittsweise Freigabe von GST-Parkstreifen ist eine schnell umsetzbare Lösung. Die übrigen Lösungsansätze sind je nach vorhandenen Gegebenheiten auf den Rastanlagen mit mehr oder weniger Aufwand verbunden. Aus baulicher Sicht können Parkmöglichkeiten für Lang-Lkw auch auf bestehenden Rastanlagen umgesetzt werden. Aus rechtlicher Sicht sollte eine eindeutige Verkehrsregelung für die neue Fahrzeugart Lang-Lkw (zwischen Lkw und GST) festgelegt werden. Ein entsprechendes Zusatzzeichen ist dafür auch heute schon möglich. Die Untersuchung hat gezeigt, dass es verschiedene Ansätze zur Verbesserung der Parksituation von Lang-Lkw auf Rastanlagen gibt. Das als Problematik angeführte Parken mit Lang-Lkw ist jedoch als beherrschbar einzustufen, sofern die Anteile der Lang-Lkw am gesamten Straßengüterfernverkehr und der Parkbedarf der Lang-Lkw aufgrund der im Feldversuch beobachteten recht kurzen Fahrtweiten gering bleiben. Der künftige zusätzliche Parkstandbedarf für Lang-Lkw kann nur unter Realisierung solcher Maßnahmen (einzeln oder abgestuft als Maßnahmenkonzept) abgedeckt werden.
Die Bundesregierung hat zum 01.01.2012 einen deutschlandweiten Feldversuch mit Lang-Lkw gestartet. Die dafür erforderliche verkehrsrechtliche Grundlage wurde durch die LkwÜberlStV-AusnV gegeben. Diese Verordnung schreibt u.a. die wissenschaftliche Begleitung des Feldversuches durch die BASt vor. Gründe für den Feldversuch sind vermutete Auswirkungen durch die Lang-Lkw auf die Verkehrssicherheit, den Verkehrsablauf, die Verkehrsqualität und auf die geometrische Gestaltung der Verkehrsanlagen. Solche Auswirkungen sind u.a. für plangleiche Kreuzungen und für Kreisverkehrsplätze zu erwarten. Ziel der Untersuchung war es deshalb, diese Knotenpunktformen im Realbetrieb mit Lang-Lkw zu untersuchen. Dabei wurden das Fahrverhalten, die Fahrgeometrie und der daraus resultierende Flächenbedarf von Lang-Lkw erfasst. Die Untersuchungsmethodik umfasste vor allem Kameraaufzeichnungen am Lkw und Messungen mit einem Laserscanner. Dadurch konnten die Fahrzeugkanten erfasst werden. Außerdem wurde die Geometrie der Knotenpunkte vermessungstechnisch aufgenommen. Mit einem GIS-Programm wurden die Fahrzeuggeometrien und die Knotenpunktgeometrien in ein CAD-Programm exportiert. Dadurch war es möglich, die Schleppkurven zu erstellen. Die Lang-Lkw wurden außerdem konventionellen Lkw vergleichend gegenübergestellt. Die real gemessenen Schleppkurven der Lang-Lkw würden auf richtliniengerechte Knotenpunkte passen (Ausnahme getesteter Lang-Lkw-Typ 2). Die überstrichenen Flächen der Lang-Lkw werden durch die Knotenpunkte abgedeckt. Voraussetzung ist aber, dass die Lang-Lkw den Knotenpunkt ideal anfahren und befahren. Diese Ideallinien wurden aber nicht gemessen. Die Fahrer waren immer etwas zu weit rechts oder links im Fahrstreifen, so dass sie dann über den anderen Fahrstreifen oder über den Randstreifen (nicht Bankett) mitgefahren sind. Im realen Betrieb unter dem realen (Zeit-)Druck muss von solchen Bewegungen und Abweichungen ausgegangen werden. Kurzfristig wäre es noch tolerierbar den Randstreifen zu überfahren " langfristig wäre aber eine Verbreiterung sinnvoll. Bei Kreisverkehren gilt das nur eingeschränkt. Vorhandene Bewegungsspielräume in den Ausfahrquerschnitten reichen bei -¼-Kreisfahrten nicht aus. Bei Abweichungen von der idealen Fahrlinie werden in Kreisverkehren der Innenring und Bankette überstrichen oder überfahren. Die geringsten Abweichungen vom Referenzfahrzeug haben Typ 1 und 5. Diese schnitten teilweise besser ab oder entsprachen dem Fahrverhalten des Referenzfahrzeuges. Am ungünstigsten verhielt sich Typ 2. Hier kam es trotz Ausnutzung der verfügbaren Bewegungsspielräume zu überfahrenen Markierungen und Randstreifen.
Die Bundesregierung hat zum 01.01.2012 einen deutschlandweiten Feldversuch mit Lang-Lkw gestartet. Die dafür erforderliche verkehrsrechtliche Grundlage wurde durch die LkwÜberl-StVAusnV gegeben. Untersuchungsansätze der begleitenden Forschung sind vermutete Auswirkungen auf die Verkehrssicherheit, den Verkehrsablauf, die Verkehrsqualität und geänderte Anforderungen an die geometrische Gestaltung der Verkehrsanlagen. Solche Auswirkungen sind z.B. für Rampen in planfreien Knotenpunkten, Rampen und plangleiche Teilknotenpunkte in Anschlussstellen, Nothaltebuchten in Tunneln und Parkstände auf Rastanlagen zu erwarten. Ziel der Untersuchung war es, diesbezüglich Erkenntnisse und Erfahrungen im Realbetrieb mit Lang-Lkw zu sammeln. Im Rahmen der Untersuchung wurden Fahrverhalten, Flächenbedarf und die Fahrgeometrie von Lang-Lkw erfasst. Die Untersuchungsmethodik umfasste u. a. Kameraaufzeichnungen am Lkw und photogrammetrische Vermessungen der Fahrlinien (der ueberstrichenen Flächen). Durch Verfolgungsfahrten und Spurhaltemessungen mittels Laserscanner wurden Lang-Lkw konventionellen Lkw vergleichend gegenübergestellt. Die Messungen ergaben, dass Lang-Lkw in (indirekten) Rampen, Ein- und Ausfädelungsstreifen und Verflechtungsstrecken keine Auffälligkeiten aufwiesen. Dagegen nutzten sie bei Einbiegevorgängen an Knotenpunkten in Anschlussstellen die Bewegungsspielräume aus und überfuhren benachbarte Fahrstreifen. In Tunnelnothaltebuchten konnten 25,25 m lange Fahrzeugkombinationen nicht einparken. Das Befahren von Schraegparkständen konnte nur unter Mitbenutzung benachbarter Parkstände erfolgen.
Injury probability functions for pedestrians and bicyclists based on real-world accident data
(2017)
The paper is focusing on the modelling of injury severity probabilities, often called as Injury Risk Functions (IRF). These are mathematical functions describing the probability for a defined population and for possible explanatory factors (variables) to sustain a certain injury severity. Injury risk functions are becoming more and more important as basis for the assessment of automotive safety systems. They contribute to the understanding of injury mechanisms, (prospective) evaluation of safety systems and definition of protection criteria or are used within regulation and/or consumer ratings. In all cases, knowledge about the correlation between mechanical behavior and injury severity is needed. IRFs are often based on biomechanical data. This paper is focusing on the derivation of injury probability models from real world accident data of the GIDAS database (German In-depth Accident Study). In contrast to most academic terms there is no explicit term definition or definition of creation processes existing for injury probability models based on empirical data. Different approaches are existing for such kind of models in the field of accident research. There is a need for harmonization in terms of the used methods and data as well as the handling with the existing challenges. These are preparation of the dataset, model assumptions, censored/unknown data, evaluation of model accuracy, definition of dependent and independent variable, and others. In the presented study, several empirical, statistical and phenomenological approaches were analyzed regarding their advantages and disadvantages and also their applicability. Furthermore, the identification of appropriate prediction parameters for the injury severity of pedestrians has been considered. Due to its main effect on injuries of pedestrians and bicyclists, the importance of the secondary impact has also been analyzed. Finally, the model accuracy, evaluated by several criteria, is the rating factor that gives the quality and reliability for application of the resulting models. After the investigation and evaluation of statistical approaches one method was chosen and appropriate prediction variables were examined. Finally, all findings were summarized and injury risk functions for pedestrians in real world accidents were created. Additionally, the paper gives instructions for the interpretation and usage of such functions. The presented results include IRFs for several injury severity levels and age groups. The presented models are based on a high amount of real world accidents and describe very well the injury severity probability of pedestrians and bicyclists in frontal collisions with current vehicles. The functions can serve as basis for the evaluation of effectiveness of systems like Pedestrian-AEB or Bicycle-AEB.
The evaluation of the expected benefit of active safety systems or even ideas of future systems is challenging because this has to be done prospectively. Beside acceptance, the predicted real-world benefit of active safety systems is one of the most important and interesting measures. Therefore, appropriate methods should be used that meet the requirements concerning representativeness, robustness and accuracy. The paper presents the development of a methodology for the assessment of current and future vehicle safety systems. The variety of systems requires several tools and methods and thus, a common tool box was created. This toolbox consists of different levels, regarding different aspects like data sources, scenarios, representativeness, measures like pre-crash-simulations, automated crash computation, single-case-analyses or driving simulator studies. Finally, the benefit of the system(s) is calculated, e.g. by using injury risk functions; giving the number of avoided/mitigated accidents, the reduction of injured or killed persons or the decrease of economic costs.
The grip between the road surface and vehicle tires is the physical basis for the moving of all vehicles in road traffic. In case of an accident the available grip level is one of the most relevant influence factors, influencing the causation and the procedure of the accident. However, the estimation of the grip level is not easy and therefore, is commonly not done on the accident scene. This is especially true for the measurement of the water depth. Until now, real accident databases provide no measurement data about the grip level and the water film depth and thus, the estimation of its influence is not possible yet. From the tyre manufacturers point of view, it is important to know about the road conditions (namely grip level, macro-texture, water depth, temperature) at the accident scene, as well as the operating conditions of the vehicles (braking, loss of control, speed, etc). These data is necessary to define relevant tyre traction tests for the end-user and for regulations. For this reason VUFO and Michelin developed a consistent method for the measurements of grip level and water depth for the accidents of the GIDAS database. The accident research team of Dresden, which documents about 1000 accidents with at least one injured person every year, is measuring the micro-roughness and the macro-roughness directly on the spot. For the measurement of the micro-roughness a Skid Resistance Tester (British Pendulum) is used. The Mean Texture Depth (describing the macro-roughness) is measured by the Sand Depth Method. Since June 2009, measurements for more than 700 accidents including 1200 participants have been carried out. In case of wet or damp road conditions during the accident, the water depth is measured additionally. Therefore VUFO and Michelin developed a special measurement device, which allows measurements with an accuracy of 1/10 millimetre. The measurement point at the accident scene is clearly defined and thus, the results are comparable for all different accidents and participants. The use of the GIDAS database and the accident sampling plan allows representative statements for the German accident scenario. With this data it is possible for the first time to have an accurate view of the road conditions at the accident scene. One possibility is a more detailed estimation of hydroplaning accidents using the actually measured water depths. The development of new testing methods and new tires can be based on the real situation of the road infrastructure. Furthermore, the combination of the technical GIDAS data and the measured road surface properties can also be used for the estimation of effectiveness of several safety systems like the brake assist and/or emergency braking systems. The calculation of a reduced collision speed due to the use of a brake assist is only one example for the application of real measured grip level data.
Analysis of the accident scenario of powered two-wheelers on the basis of real-world accidents
(2013)
For the first time since 20 years the German national statistics of traffic accidents revealed an increasing number of fatalities and seriously injured persons in 2011. This negative development was especially caused by increasing numbers in all groups of vulnerable road users (VRU). Furthermore, the comparison of fatality reduction rates between several categories of road users shows that persons on motorcycles show the worst performance over years. Although every second fatality in German traffic accidents is still a car occupant, users of PTW make up more than 20% in the meantime. Assuming further improvements in the field of occupant protection this trend will continue. For that reason, a study on the basis of real-world accidents was conducted to describe the accident scenario involving motorcycles and to identify the reasons of the above-described fact. Approximately 1.800 motorcycle accidents out of GIDAS database were used for the analyses. The first part of the study deals with the question how representative the GIDAS database is for the German motorcycle accident scenario. Afterwards, detailed descriptive statistics on motorcycle accidents were presented considering numerous parameters about the accident scene, environmental influences, vehicle information, individual characteristics, interview data, injury severity and injury causation. One important point is the identification of the most frequent critical situations that are typical for motorcycle accidents. Furthermore, a special focus was on accident causation. Finally, conspicuous facts out of the analysis are emphasized. All in all, the study gives a comprehensive overview about the German motorcycle accident scenario. One the one hand, the use of weighted GIDAS data allows representative and robust statements on the basis of large case numbers; on the other hand highly detailed conclusions can be drawn. The results of the study help to understand the particularities of motorcycle accidents and provide approaches for further improvements in the field of PTW safety.
The declining trend since 1991 in the number of killed people was broken in 2011 when overall 4 009 people died in traffic accidents in Germany. The question arises if there is a stagnating trend of fatalities in Germany in future? By breaking down the accidents with casualties towards a monthly view one can see a decreasing trend of fatalities in the warmer months especially since 2009. When comparing against winter months higher deviations are observed. In December 2011 an increase of 191 traffic deaths were registered (181 in 2010 compared to 372 in 2011). Further analyses of different accident influences were evaluated and their possibility of drastic change from one year to the other was determined. As seen weather- and environmental conditions are one of the major contributing factors and are one of the causes for the increased number of fatalities. To support the underlying assumption a model had been created to calculate the number of traffic deaths on a daily basis approach. As an input, road conditions projected through weather parameters and also different driving behaviors on weekdays or holidays were used. As a result, estimates of daily fatality with up to 75% precision can be achieved out of the 2009, 2010 and 2011 data. Further on it shows that weather and street conditions have a high influence on the overall resulting number of traffic accidents with casualties, and especially to the number of fatalities. Hence it is estimated that approximately 3 300 people were killed in traffic accidents in Germany in 2013 which would be again a reduction of another 13% compared to 2012. Therefore an answer to the question will be that the decreasing trend in traffic fatalities in Germany somehow is not broken when environmental conditions are included in national statistics. Their effects will become more visible in future accident statistics and it is estimated variances of 5% to 8% of the annual number of traffic fatalities in Germany will be seen.
The paper aims to study the injury risk and kinematics of pedestrians involved in different passenger vehicle collisions. Furthermore, the difference of pedestrian kinematics in the accidents involved minivan and sedan was analyzed. The 18 sample cases of passenger car to pedestrian collisions were selected from the database of In-depth Investigation of Vehicle Accident in Changsha of China (IVAC),of which the 12 pedestrian accidents involved in a minivan impact for each case, and the 6 accidents in a sedan impact for each. The selected cases were reconstructed by using mathematical models of pedestrians and accident vehicles in a multi-body dynamic code MADYMO environment. The logistic regression models of the risks for pedestrian AIS 3+ injuries and fatalities were developed in terms of vehicle impact speed by analyzing the minivan-pedestrian and sedan-pedestrian accidents. The difference of pedestrian kinematics was identified by comparing the results from reconstructed pedestrian accidents between the minivans and sedans collisions. The result shows that there is a significant correlation among the impact speed and the severity of pedestrian injuries. The minivan poses greater risk to pedestrian than sedan at the same impact speed. The kinematics of pedestrian was greatly influenced by vehicle front shape.